Showing 3474 items
matching biscuit-makers
-
Greensborough Historical Society
Plate, Stone Pottery Pahara, Hall dinner plate, 1910c
Dinner plate owned by the parents of Norman Hall, Grimshaw Street Greensborough.Example of fine dinner plate.White china round dinner plate with blue floral decoration and gilt edge. Maker's mark on base: blue crown over "Stone Pottery Pahara"plates, dinner plates, hall family -
Halls Gap & Grampians Historical Society
Postcard - B/W, 1950
By 1950 Hotel Bellfield was owned by Mr and Mrs McMullin In June 1952 the staff quarters at the rear of the main building was destroyed by fire. As the staff accommodation comprised seven detached bungalows, similar to those in the photograph, it was possible to isolate the fire from spreading to the main building.Guest house with bus in foreground Wonderland Range in backgroundThe Rose series P 4894 copies Kodak Picture maker, Agfaaccommodation, guesthouses, bellfield -
4th/19th Prince of Wales's Light Horse Regiment Unit History Room
Camera, Eastman Kodak Co, abt 1912
Camera used by No 59 Capt A Chanter, Machine Gun Section, 4th Australian Light Horse Regiment during WW1. The 4th Light Horse Regiment is an ancestor unit of the Regiment, serving with distinction in WW1. The user of this camera commanded the Machine Gun Section of the 4LH. His historically significant collection of photos is held by the Unit History RoomCamera, No 1 Eastman Kodak JRMaker's plate in camera Inside leather case - initials A L Ccamera, ww1, chanter -
Warrnambool RSL Sub Branch
Uniform - Royal Australian Navy (RAN), Naval Ratings Bib
The Royal Australian Navy Uniforms are based on the uniform of the Royal Navy. They reflect traditions that can be traced back to the Royal Navy (England) and demonstrate the relationship between the two. This bib is one of four parts to a Naval Ratings Uniform which was presumably owned by J.M. Parsons.This bib is one part of a naval ratings uniform which consists of four parts. The uniform is representative of the Royal Australian Navy uniform and can be traced to the Royal Navy (England). The complete uniform shows the connection between Australia and England since European settlement.Cream cotton twill with navy blue trim around neck and over shoulders and narrow tie fastener.label of maker "Made in Australia Berlei Berlie Ltd Size 1" navy, ran, royal australian navy, naval bib, naval ratings bib, naval ratings uniform, military uniform, j.m. parsons, parsons, j parsons -
Warrnambool RSL Sub Branch
Uniform - Royal Australian Navy (RAN) Naval Ratings Collar
The Royal Australian Navy Uniforms are based on the uniform of the Royal Navy. They reflect traditions that can be traced back to the Royal Navy (England) and demonstrate the relationship between the two. This bib is one of four parts to a Naval Ratings Uniform which was presumably owned by J.M. Parsons.This bib is one part of a naval ratings uniform which consists of four parts. The uniform is representative of the Royal Australian Navy uniform and can be traced to the Royal Navy (England). The complete uniform shows the connection between Australia and England since European settlement.Cream cotton twill with navy blue trim around neck and over shoulders and narrow tie fastener.label of maker "Made in Australia Berlei Berlie Ltd Size 1" navy, ran, royal australian navy, naval bib, naval ratings bib, naval ratings uniform, military uniform, j.m. parsons, parsons, j parsons -
Federation University Historical Collection
Mining Lamp, E. Thomas and Williams Ltd, Welsh Mining Lamp
This lamp is typical of lamps used in Welsh Coal Mines. It was purchased from the supplier around mid 1995. The Welsh Miners’ Lamps were ingeniously designed over 180 years ago to alert coal miners to danger. It ensures the burning of a protected flame in the presence of explosive gas, by regulating the necessary supply of atmospheric air, and by allowing the products of combustion to pass through without igniting the gaseous atmosphere. If the atmosphere is so heavily charged that noxious gas enters the lamp, its presence will be indicated by a change in the length and color of the flame, and (unless there are exceptional circumstances), the miner has sufficient warning to secure his safety. (http://www.welshminerslamps.com/info_lamp_personaluse.shtml, accessed 06/05/2015) E. Thomas & Williams, Ltd. mining lamps have been in continuous production since 1860. Cambrian Lamps are approved for use in coal mines where methan gas and oxygem deficinecy are hazards.Solid Brass traditional miners Flame Safety Lamp with Copper Chimney. The base of this lamp is tooled from solid brass because brass does not spark when it hits rock and is therefore the safest metal to use underground. The lamp burns lamp oil (kerosene). R. Thomas and Williams Ltd Makers Aberdare Wales Cambrian No 152897mining lamp, miner's lamp, thomas and williams, wales, welsh, welsh miners lamp, mining, cambrian lampworks, miners flame safety lamps -
Flagstaff Hill Maritime Museum and Village
Functional object - Barrel Spigot, H Gage, Early 20th century
Ancient Greek and Roman first used spigots in their bathhouses for obtaining water from aqueducts, routing it into pipes and buildings, and finally into their tubs or baths. The subject spigot or tap in Flagstaff collection was used in wine, beer, or spirits barrels to dispense the liquid contained within. A spigot definition is a device that controls the flow of liquid from a container. As mentioned earlier the Greeks and Romans created theirs for use in plumbing water later spigots were adapted to use in barrels or casks. An item still in use today in wine and beer barrels to dispense liquid and although spigots today are made from differing materials other than wood their function has not changed over the centuries.Wooden barrel spigotMarked "H Gage Maker Melbourne" on the side & 2B marked in black flagstaff hill, warrnambool, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, barrel spigot, cask tap, h gage melbourne, coopering accessories -
Federation University Historical Collection
Equipment - Scientific Instument, Globes, 20th Century
Most were used in various capacities at Ballarat School of Mines or University of Ballarat.Assorted lamps including Edison Carbon filament light bulbs and other special purpose lamps, .1-3) Robertson, pear shaped 220 V 16, carbon filament? bayonet light bulb with 'nipple'. .4) Ediswan, standard shaped, 928, carbon filament? bayonet light bulb with 'nipple'. .5) (B in a circle) 280 V 32 oo1A, pear shaped, carbon filament? bayonet light bulb with 'nipple'. .6-7) Crompton? standard shaped, carbon filament? bayonet light bulb. Clear glass with an amber tint. .8) 230-240 V 40 W, pear shaped, wire filament bayonet light bulb. .9-10) Osram standard shaped, heavy spiral and disc electrodes, bayonet light bulb. (The disc is loose in 10) .11 a&b) Osram black glass, large standard shaped, 230-240 V 125 W, bayonet light bulb. .12) Philips tubular shaped projector lamp with instruction leaflet. .13) Philips tubular shaped projector lamp with instruction leaflet in original box. .14) EH JA 12 V 55 W small projector lamp. .15) Large special purpose, standard shaped, frosted bayonet light bulb. .16) Siemens, standard shaped, modern Edison screw light bulb. .17) Philips, standard shaped, modern Edison screw, frosted light bulb. .18) Crompton, gas filled 240 V 75 W, standard shaped, bayonet frosted light bulb in original box. .19) Crompton, gas filled 230 V 300 W. standard shaped, large modern Edison screw light bulb. .20) Probably an extension cord with a bayonet fitting at one end connected by a twisted cord of two fabric covered wires to a large socket. This socket has a copper Edison screw inner, surrounded by a ceramic tube and covered with a copper housing. The housing is cracked in two places.Some have makers brand and voltage and wattage stamped onto the glass.scientific instrument, ballarat school of mines, globes, edison, lamps, light bulbs, bayonet -
Geoffrey Kaye Museum of Anaesthetic History
Magill's laryngoscope, A Charles Kind, Ltd
This object is Magill's adaptation of the battery handle in the form of an "inserting tracheoscope". Introduced in 1935 for one-lung anaesthesia, it is combined with an endotracheal tube, the central part of which is a latex-covered wire spiral, and a bronchus blocker. In use, the tube was fixed to the holder and the whole apparatus inserted as a ttracheoscope. At the carina, the blocker was inserted into the bronchus and the balloon (now perished in this example) inflated. The holder was then removed leaving the endotracheal tube and blocker in place. The bronchus blocker consists of gum elastic on woven silver wire and has a suction channel opening at the tip. in other stages of development of Magill's laryngoscope, the original pattern blade was adapted to the battery handle, at first in a fixed arrangement and then with interchangeable blades of different sizes. Later still, the folding handle was introduced.This U-shaped chrome plated laryngoscope comprises an endotracheal tube used to facilitate access to the patient's airway, wire spring attachments and a cylindrical handle with provisions for battery to illuminate inside the body during use.Embossed on the central shaft of the item is 'A Charles King, Ltd', the maker's details.laryngoscope, anaesthesia, macgills, chrome, battery, a charles kind ltd -
Clunes Museum
Domestic object - Boiler
.1 Boiler with handle, metal, galvanised .2 Lid, Metal, galvanisedOval Stamped Metal plate affixed to lid " Weickhart Makers, Clunes"weickhart, manufacturing in clunes, metal tools -
Tatura Irrigation & Wartime Camps Museum
Rectifier, McKenzie & Holland, 1925
This object was installed at the Victory Hall, Tatura, to change main power (AC 240 v), to DC (direct current 30 volts). This supply was required to run the hall's picture show.An electrical devise which changes AC power supply to DC supply.Makers name; title object; Ref. to voltage, amps. AC and DC.rectifier, victory hall tatura, electrical converters -
Williamstown High School
Hat badge - 1940's
Round metal hat badge with enameling in red black and yellow. Depicts the Williamstown High School logo of the 1940's with fish across anchor. Badge has a loop to allow for sewing onto hat bands.On back of badge; 374. Also very small makers make that is indecipherable. williamstown high school, school uniform, hat badge, 1940's -
Williamstown High School
Form Captain badge 1930s
Round metal badge with Red, yellow and black enameled decoration on the front and a hook clasp on the back, presented to form captains at Williamstown High School in the 1930s. This badge worn by Peg Bonwick (nee Clark).On front 'Form Captain' Makers mark on mark: K.C. Lunes Melbwilliamstown high school, 1930s, form captain, badge, peg bonwick, peg clark -
National Wool Museum
Photograph
Photograph probably for promotional purposes, of a "David Sowden & Sons" loom. Photograph was with other photographs in an envelope printed "David Sowden & Sons" among items from Yarra Falls MillPhotograph. black and white, of a "David Sowden & Sons" loom.DAVIS SOWDEN & SONS SHIPLEY/Power loom and jacquard machine makerstextile machinery weaving textile mills textile mills, yarra falls mill david sowden & sons, weaving looms, weaving machinery, textile machinery, weaving, textile mills -
National Wool Museum
Photograph
Photograph probably for promotional purposes, of part of a "David Sowden and Sons" loom attachment. Photograph was with other photographs in an envelope printed "David Sowden & Sons", among items from Yarra Falls Mill.Photograph, sepia, of a "David Sowden & Sons" loom attachment, which has been threaded with yarn.DAVID SOWDEN & SONS/ BRADFORD/ POWER LOOM AND JACQUARD MACHINE MAKERStextile machinery weaving, yarra falls mill david sowden & sons, weaving looms, weaving machinery, textile machinery, weaving -
Maldon Vintage Machinery Museum Inc
Clock
Battery operated clock with a highly lacquered face with an image of half of a split casing pump casing. The image is in blue and black on a white ground centred on a circular wooden clock face. Numbers are imitation chrome plastic covered with lacquer. The second hand is red. The backing board is rectangular. The operating mechanism is centred in a housing on the back.Maker's name ("Chris Shaw") on a gold sticker at the bottom centre of the back.horology -
Wodonga & District Historical Society Inc
Decorative object - Silver toned Purple Pendant Necklace from the Sarah Coventry Jewellery Range c. 1970s-1980s
Sarah Coventry Pty. Ltd. was a North American jewellery company that was established in 1949 by the Stuart family as part of Emmons Jewelry, Inc. It began operations in England and Australia in 1968, and in Australia it moved from Carlton in Melbourne to Wodonga in 1969. The premises were originally on High St. in Wodonga, but a new warehouse was built in Melbourne Rd. later in 1969. It was a direct selling jewellery business using a party-plan model similar to Tupperware and Avon. The sales reps or 'Hostesses' were provided with jewellery samples in demonstration kits, which they displayed at jewellery parties in their homes. The designs for jewellery such as brooches, necklaces, earrings, chokers and bracelets were purchased from freelance designers and jewellery manufacturers rather than in-house designers. In 1979 Sarah Coventry Pty. Ltd. in Wodonga was bought by three Australian businessmen, including Wodonga local Jim Sawyer, and continued to sell jewellery under the name "Sargem Pty. Ltd”, for several more years in the 1980s. As part of the Sarah Coventry collection, the necklace has local significance with the decentralised commercial development of regional centres such as Wodonga in NE Victoria, as well as national and international significance from the perspective of social and economic developments for women after World War II. The direct selling party-plan business model Sarah Coventry was based on is also considered the first of its kind for jewellery.Silver toned, drop shaped purple pendant necklace from the Sarah Coventry Jewellery Range c. 1970s-1980s, on a long silver toned chain."(c) SARAHCOV MADE IN CANADA" on diamond shape makers mark tagsarah coventry, jewellery, wodonga, costume jewellery, vintage fashion jewellery, necklace, necklaces -
Woodend RSL
Horse Saddle Girth, James Robb, Belt attachments presumably made prior to 1917
James Robb (born 1940) was an importer and manufacturer of all kinds of saddlery. References: Centre for Australian Art, 2020 http://www.printsandprintmaking.gov.au/impressions/31305/ Faded, mustard coloured woven strap with buckles on either end. Centre of strap has a thin leather belt loop attached. Buckles are attached with brown, rectangular leather strips which appear to be hand-sewn to strap in white thread. Two holes which appear to be for a buckle prong, are visible on one side above the leather buckle attachment. A row of machine stitched holes on this side suggests a rectangular, arrow headed strap was once attached.J. ROBB MAKER HOBARTTOWN stamped into brown leather buckle attachments. -
Bendigo Military Museum
Photograph - PHOTOGRAPHS, BRITISH, 1931- 1934
Listed on photograph storage folder - handwritten in blue ink "MRS M MURPHY/ RE GOULDING" Photographs - three original black and white photographs on photo paper. 1. British troops on Parade with building and trees in background. On cardboard mount - grey colour. Photograph title above in white ink. Maker's stamp bottom right and on back with production number. 2. British - group portrait, HQ troops with Trophy and five silver cups, on cardboard mount - beige with grey printed frame. Production number on back. 3. Building - possibly a temple in Calcutta. On cardboard mount - off white colour.1. Photograph title - handwritten in white ink - "1st Bn. 60th RIFLES CALCUTTA/ 1931-34/ CELER-ET-AUDAX" Makers stamp - blue ink (front) "Edna Lorenz/ CALCUTTA" . (back) "EDNA LORENZ/ 20 PARK STREET/ CALCUTTA/ No". Production number (grey lead) "54392A". 2. On back - production number - grey lead pencil "6365.7".photographs, calcutta, 1st bn 60th rifles -
Flagstaff Hill Maritime Museum and Village
Equipment - Tooth Extractor, Late 19th - early 20th century
Toothaches have been with us since the evolution of teeth and extracting teeth. I wonder what poor Homo erectus did when suffering with a toothache. He probably just suffered and probably became very bad tempered. Ancient Dentistry Significant tooth decay did not appear until hunter-gatherer societies became agrarian. The change in diet included a large increase in carbohydrates which then led to tooth decay. Early man was primitive but he was also pretty smart. Some time around 8000 years ago someone in the area that is now Pakistan was using a drill to remove tooth decay. Examination of Neolithic skulls have revealed the handiwork of at least one very early dentist. A Sumerian text in about 5000 B.C. taught that the cause of tooth decay was tooth worms. Proposed cures for toothache were numerous. Early Egyptians wore amulets. An Egyptian named Hesy-Re, is known as the first dentist. Praise for his dentistry is inscribed on his tomb. Unfortunately it doesn’t delineate what he did to earn the praise. Pliny, the Elder, recommended finding a frog at midnight and asking it to take away the pain. The doctor to Emperor Claudius around 50 A.D. had his toothache patients inhale smoke produced by scattering certain seeds on burning charcoal and then rinsing the mouth with hot water. This was to expel the tooth worms. On the more practical side Aristotle and Hippocrates both wrote about the treatment of tooth decay. A primitive forceps was used for extracting teeth. Some dentists at that time were able to weave wire in the teeth to stabilize loose teeth. Medieval Torture From about 500 A.D. to 1100 A.D. monks were well educated and well trained and did some of the surgical procedures of the time. Barbers handled the rest of the operations, especially blood letting and tooth extractions. In 1163 the Pope put a stop to all surgeries by monks and the field was left open to the barbers. Barbers were, after all, very skilled with knives and razors. In fact, the barber pole, red and white spiraling stripes, is a symbol of the blood letting; red for blood. white for bandages. In the 1300s a Barbers’ Guild was established which divided the barbers into two groups: those with the skills and training to do procedures and those who were relegated to blood letting and tooth extractions. Pliers from a blacksmith’s foundry were the only device available. Barbers would often go to fairs and advertise painless tooth pulling. A shill in the audience would come on the stage, feigning severe toothache. The barber would pretend to extract tooth, pulling out a bloody molar he had palmed earlier. The supposed sufferer would jump for joy. The barbers set up near the bands at the fairs so that the music would drown out the screams of their patients. If the tooth was loose enough, the barber would tie a string around the tooth and yank hard to extract the tooth. This was a much less painful and dangerous procedure than the pliers. The pliers often fractured other teeth and sometimes the jaw. The procedure was far from sterile and infection was a common problem and some people bled to death. The Renaissance and the Rise of Tooth Decay In the 1400s refined sugar was introduced into Europe but only reached the tables of the wealthy. While their betters were munching on sweets, the poorer folk suffered fewer toothaches. Queen Elizabeth I was known for her blackened teeth. George Washington had a tooth extraction every year after age 22. He supposedly had a set of wooden false teeth but his dentures were actually ivory. The earliest instrument designed for tooth extraction was the dental pelican, which was shaped something like a pelican’s beak. The pelican was replaced in the 1700s by the dental key, which was fitted down over the affected tooth and was better able to grip the tooth. Both still often caused more damage than relief. The Development of Modern Dentistry Modern dental equipment began to be introduced in the 1800s about the time when dentistry became a profession and dental schools began to open. Ether was used starting in 1846 to anesthetize the pain and local anesthetics were introduced in the early 1900s. Modern dentists no longer have to seat their patients on the floor and have helpers to hold them down. Dentistry is as close to painless as possible now. There is no excuse to suffer the agony of a toothache these days. And extracting teeth is no longer dangerous. https://arizonadentalspecialists.com/the-surprising-history-of-extracting-teeth/ This tooth extractor was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” that includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was physician, surgeon and chemist. In 1926, he was appointed as new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he would take time to further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the on the Australian Commonwealth Line’s T.S.S. Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill ) Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928 . The organisation began in South Australia through the Presbyterian Church in that year, with its first station being in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill where he’d previously worked as Medical Assistant and purchased a share of the Nelson Street practice and Mira hospital from Dr Les Middleton one of the Middleton Brothers, the current owners of what was once Dr Tom Ryan’s practice. Dr L Middleton was House Surgeon to the Nhill Hospital 1926-1933, when he resigned. [Dr Tom Ryan’s practice had originally belonged to his older brother Dr Edward Ryan, who came to Nhill in 1885. Dr Edward saw patients at his rooms, firstly in Victoria Street and in 1886 in Nelson Street, until 1901. The Nelson Street practice also had a 2 bed ward, called Mira Private Hospital ). Dr Edward Ryan was House Surgeon at the Nhill Hospital 1884-1902 . He also had occasions where he successfully performed veterinary surgery for the local farmers too. Dr Tom Ryan then purchased the practice from his brother in 1901. Both Dr Edward and Dr Tom Ryan work as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He too was House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. Dr Tom Ryan moved from Nhill in 1926. He became a Fellow of the Royal Australasian College of Surgeons in 1927, soon after its formation, a rare accolade for a doctor outside any of the major cities. He remained a bachelor and died suddenly on 7th Dec 1955, aged 91, at his home in Ararat. Scholarships and prizes are still awarded to medical students in the honour of Dr T.F. Ryan and his father, Dr Michael Ryan, and brother, John Patrick Ryan. ] When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery states “HOURS Daily, except Tuesdays, Fridays and Saturday afternoons, 9-10am, 2-4pm, 7-8pm. Sundays by appointment”. This plate is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. Dr Edward Ryan and Dr Tom Ryan had an extensive collection of historical medical equipment and materials spanning 1884-1926 and when Dr Angus took up practice in their old premises he obtained this collection, a large part of which is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. During his time in Nhill Dr Angus was involved in the merging of the Mira Hospital and Nhill Public Hospital into one public hospital and the property titles passed on to Nhill Hospital in 1939. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station. ). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (The duties of a Port Medical Officer were outlined by the Colonial Secretary on 21st June, 1839 under the terms of the Quarantine Act. Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served as a Surgeon Captain during WWII1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. Their interests included organisations such as Red Cross, Rostrum, Warrnambool and District Historical Society (founding members), Wine and Food Society, Steering Committee for Tertiary Education in Warrnambool, Local National Trust, Good Neighbour Council, Housing Commission Advisory Board, United Services Institute, Legion of Ex-Servicemen, Olympic Pool Committee, Food for Britain Organisation, Warrnambool Hospital, Anti-Cancer Council, Boys’ Club, Charitable Council, National Fitness Council and Air Raid Precautions Group. He was also a member of the Steam Preservation Society and derived much pleasure from a steam traction engine on his farm. He had an interest in people and the community He and his wife Gladys were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Tooth extractor, dental surgical instrument. Metal with cross hatched pattern on handle. Stamped with maker's mark on hinge. Other stamps inside handles. Part of the W.R. Angus Collection.Stamped on hinge 'CASH & SONS ENGLAND'. Inside handles are 'C', 'P' and '27'.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dr w r angus, dr ryan, surgical instrument, t.s.s. largs bay, warrnambool base hospital, nhill base hospital, mira hospital, flying doctor, dental surgical instrument, tooth extractor -
Kiewa Valley Historical Society
Saucer Ceramic, c1921
The SECV had chalets, cafes, mess halls and tea rooms all over Victoria including their construction sites. The SECV had a stores system which purchased thousands of sets of crockery and cutlery for use by personnel. There was a system of chefs, cooks, tea persons etc. to supply food and beverages to the workers. This saucer was used at one of the sites on the Kiewa Hydro Electric Scheme.Heavy, white ceramic saucer with State Electricity Commission of Victoria 1921 log/insignia on inside lip. Curves up to sides. On base, also inscribed in red are details of the makers.State Electricity Commission Victoria / 1921 On base: Vitrified / Sold by / Cafe & Hotel Supplies / Pty Ltd / DunnBennett & Co. ITC / Burslem / Made in Englandkiewa hydro electric scheme. mount beauty chalet. bogong mess hall. state electricity commission of victoria. crockery. -
Bendigo Military Museum
Accessory - WOUND DRESSING, Johnson and Johnson PTY LTD
Wound Dressing, green outer colour, waterproof, contains one single sterile dressing, on one side in black print has directions for use, serial No’s, lot No’, makers. On one side, “(arrow up) 6510 - 66 - 108 - 4140, Dressing wound sterile compressed for field use CAPO V113685 Lot ........?dressings wounds, accessory -
Bendigo Military Museum
Accessory - TIN, FOOT POWDER, Murphy Liebert Pty Ltd, C.1970’s
Peter Ball collection, refer Cat No 4704Foot powder tin green colour rectangular shape, top has a rotating cap with 6 holes in, two sides have details in black print re makers and content.Front side, “(arrow up) FOOT POWDER 2 oz Net weight”. On rear side “Formula, salicylic acid 3% starch 10% Talc 87%” On base in pen, “PBall”tins, foot powder, talc -
Flagstaff Hill Maritime Museum and Village
Photograph, late 19th century
Loch Ard was bound for Melbourne in 1878 loaded with passengers and cargo when it ran into a rocky reef at the base of Mutton Bird Island, near Port Campbell. Of the 54 crew members and passengers on board, only two survived: an apprentice, Tom Pearce and a young woman passenger, Eva Carmichael, who lost all of her family in the tragedy. The wreck of Loch Ard still lies at the base of Mutton Bird Island and much of the cargo has been salvaged. Some was washed up into what is now known as Loch Ard Gorge following the shipwreck. Cargo and artefacts have also been illegally salvaged over many years before protective legislation was introduced. The photograph is significant for its association with the wreck of the Loch Ard. This wreck has been protected as a Historic Shipwreck since 11 March 1982, under the Commonwealth Historic Shipwrecks Act (1976) Flagstaff Hill’s collection of artefacts from Loch Ard is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. It is significant for its association with the shipwreck, which is on the Victorian Heritage Register. The collection is significant because of the relationship between the objects, as together they have a high potential to interpret the story of the Loch Ard. The Loch Ard collection is archaeologically significant as the remains of a large international passenger and cargo ship. The Loch Ard collection is historically significant for representing aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The collection is also historically significant for its association with the Loch Ard, which was one of the worst and best known shipwrecks in Victoria’s history. The Loch Ard collection meets the following criteria for assessment: Criterion A: Importance to the course, or pattern, of Victoria’s cultural history. Criterion B: Possession of uncommon, rare or endangered aspects of Victoria’s cultural history. Criterion C: Potential to yield information that will contribute to an understanding of Victoria’s cultural history. Black and White photograph of Thomas Pearce. Taken on July 22nd 1878 by the Photographic Society of Victoria. Registered copyright July 24th 1878. Reverse has printed maker’s information.Printed green text “PHOTOGRAPHIC / SOCIETY OF VICTORIA / MELBOURNE / REGISTERED COPYRIGHT / JULY 24th 878” and “NONE ARE GENUINE UNLESS WITH / SIGNATURES THUS” and “PRESIDENT / VICE PRESIDENT / SECRETARY” flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, photograph, thomas pearce, loch ard, photographic society of victoria -
Flagstaff Hill Maritime Museum and Village
Printing Press, Chandler & Price Co, 1872
Printing press metal hand decorated with large turning wheel and foot pedal. Hand fed platen maker Chandler and Price, Cleveland, Ohio. Serial No C3309, Made 1908."CHANDLER AND PRICE CLEVELAND OHIO" USA "C3309"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, chandler and price, printing press, cleveland, ohio, printing trade, newspaper printing, hand operated printer -
Federation University Historical Collection
Instrument - Scientific Instrument, W.F. Stanley & Co Ltd, Fuller Calculator, 1926
This item was first owned by R.W. Richards, c1918. He presented this calculator to E.J. Barker in the early 1960s.A polished, hinged, timber box containing: 1. Fuller Calculator 2. instruction Manual 3. A "provenance" statement from E.J. Barker. There are a makers and a retailers label inside the lid.Serial Number 5721-26 on top end of brass scale. fuller calculator, richards, barker, stanley, seward -
Flagstaff Hill Maritime Museum and Village
Blackboard pointer, J Rabone and Sons
Blackboard pointer, wood cylindrical rod with brass tips at either end. Marked "J Rabone and Sons, Makers, Birmingham" and "Yard" on the brass tip. Calibrated in inches and fractions of a yard.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, blackboard pointer, j rabone and sons -
Flagstaff Hill Maritime Museum and Village
Plane
Plane Rabbet type maker Mathieson and Son UK 7/8 in. Has a thumbscrew adjustment for depth stop, 2 point nicking Dado iron. Stamped W Worrallflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Bendigo Historical Society Inc.
Container - CLAY CRUCIBLE
Small clay crucible bowl used for smelting, assaying and refining gold. Maker's name impressed on bottom 'Battersea Works England ' and '2 ?1m', possibly denoting size of crucible.Battersea Works Englandgold mines, mining equipment, gold crucible -
Yarrawonga and Mulwala Pioneer Museum
Tennis racquet, 1960’3
Wooden frame, gut strings, some broken, leather grip which is worn. Racquet well used as it is worn on the head. Large size grip. Makers markings mainly on the shaftMax ply International, Duroplas overlay. Presenting the new Duroplas overlay developed by Dunlop, a Dunlop production. Five star quality