Bell was presented to the Melbourne Legacy Club by the departing president E.R.F. Serman in 1929. It was used during Comradeship Committee meetings.E.R.F. Serman was the Melbourne Legacy Club president in 1928-1929. Comradeship Committee meetings were very important to the Legatees.18 Pounder Shell casing that has been polished and had a small brass hook welded to the base. The casing has been split and bears the signs of being hit with a hammer. There is an inscription engraved on the front. The shell is hung from a brass arch which has been mounted to a wooden base. Two small brass hooks on the base act as a mount for the mallet. The brass arch and hooks are attached to the wooden base via flat head screws from the underside. The mallet is constructed of a brass rod with a felt head.Presented to the Melbourne Legacy Club by E.F. SERMAN PRES.1928-9comradeship, committee, legatee event

The steam engine indicator, or dynamometer, is an instrument used on a steam engine (such as that of a vessel or train) to measure and record the change in the pressures of the engine’s cylinders during their operating cycle. The engineer would use it to identify problems or defects such as bad valve settings or constricted steam pipes. It could indicate the difference in efficiency caused by adjustments made to the engine, being able to instantly measure the variation of pressure from the engine stroke at any given time. This force of power would be registered by a pencil, fitted to the adjustable arm, which would trace a line on paper wound around the cylinder. The recorded information could be used in conjunction with mathematical tables. This particular instrument was made by T.S. Mc Innes, one of the better manufacturers of engine indicators. Mc Innes engine indicators were still being used in the mid 1900’s. This specific instrument was used by Mark Forsythe of North Berwial, Scotland and late of Ararat, Victoria when he was chief engineer on the “SS Talawena” in 1892. The Port of Warrnambool, in Victoria, harboured steam ships that carried both passengers and cargo along the south west coast in the late 1800’s and into the 1900’s. The engineer of a steam ship was responsible for reaching and maintaining the optimum level of steam energy to serve the locomotion and efficiency of the steam ship. The engineer would use a steam engine indicator to measure and record information to achieve this purpose. Engine Dynamometer or Steam Engine Indicator in square, fitted oak case. This brass instrument is used to measure and record steam pressure for setting up and adjusting valves on a steam engine. It has an oscillating recording drum with vertical, silver clip attached for holding paper in place around the drum. The drum oscillates left to right. There is a pulley attached to a length of cord, which is attached to the drum. Beside the drum is a fine metal arm, vertically adjustable, small hole in the end to hold a pencil. Inscription stamped into bracket of the arm. The engine indicator is mounted on a hinged side of the case that swings out ready for use. Attached chains prevent the side from opening past vertical. There is storage for other accessories and an empty compartment in the base (where a scale or ruler may have been located). The case has a collapsible wooden handle, brass hinges and two brass, hook-shaped catches. There is a code stamped inside the lid. It contains a brass, ‘T’ shaped steam-cock (or stop cock) with two open ends made of metal pipe with different sized threads. (Turning the handle on top opens and closes the space in the pipe and would close off the flow of steam from one end to the other.) Also inside the case are three different spiral springs, each with a threaded nut on the end that has a threaded hole inside it. Used by Mr Mark Forsythe when chief engineer on the SS Talawena in 1892 “T.S. MC INNES PATENT” and “522 _ _” (last 2 digits are unreadable) pressed into the arm of the brass indicator. “[ ] X ’ stamped inside the lid of the case. The 3 springs all have a number stamped into them: (1) “32” and “12” (2) “12” and “16” [above] “12” (3) “64” and “150” Card that came with instrument “This instrument was used by Mark Forsythe of North Berwial Scotland and late of Ararat, Victoria when chief engineer on the SS Talawena in 1892" dynamometer, steam engine indicator, t.s. mcinnes, glasgow, dobbie mcinnes, port of warrnambool, warrnambool, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, maritime museum, shipwreck coast, great ocean road

The item was obtained by Donors Grandfather who served British Forces WW1 and was a RAF Sqd Leader during the surrender of Japanese Forces in Hong Kong and New Territories WW2..1) British Marching Compass brass circular shape with hinged opening, has small screws lock device on one side, brass ring on one end. .2) Brown leather case for .1). Has belt loop on rear, folding lid with brass stud for securing..1) On base, “Cruchon & Emons London, 1916 (arrow up)”compass, marching, equipment

8700.1 - Large wooden box with two pull down latches. 8700.2 - Large wooden box with two pull down latches. 8700.3 - Large brass weight with handle on top. 8700.4 - Large brass weight with handle on top. 8700.5 - Large brass weight with handle on top.

Safety lamp made for underground miners to replace naked flame lightingUsed in underground mining in Ovens or Buckland mining districtsmetal and glass oil powered lamp(partly obscured on glass) BRITISH MFP. ( on brass) 3BB BOSS ( on screw off base) 56 and 10mining, lamp, oil, safety, kerosene, underground

Used by Harold and Jean ParkerAntique wooden mantle clock made in USA with an Australian made Duff brand oak case with a plain angled top with round shaped pillar styled sides. It has a white ceramic dial face with black digits and black metal hands. The dial is covered by a glass and gold trimmed covering that may be opened on the right side. Inside the case is a Waterbury Clock Co of USA key and the internal workings are visible. It is not in working order.Duff brand brass plaque on back of cover. Key has Waterbury Clock co USA stamped on it.clocks, timepieces, clock components, clock keys, mantle clocks

WWII Historical significance with some information of the Dandenong area.Black and white framed photo of 408537 Sgt R.R.E. Swords 23 Sep 1912 - 21 Jan 1943. This photograph is a tribute to the late Robert Richard Falkiner Swords. 'Bob' as he was known to his friends and most townsfolk of Dandenong and it's people. His older brother James, served in the First World War and later was a founding member of the Dandenong RSL Sub-Branch, formed in 1919, was its second President and also served a term as Honorary Secretary and Treasurer. James was the Editor of Dandenong's first newspaper, the Dandenong Advertiser. 'Bob' Swords was also a member of the Dandenong Advertiser newspaper and was a driving force in Dandenong getting it's own Hospital. For many years his photo hung over the entrance to the old building, which was demolished some years back. Regrettably this photo was lost. Bob enlisted into the Royal Australian Air Force to train as a pilot on 26 April 1941 and after initial training embarked to Southern Rhodesia. After completion of initial flight training he then moved to England for advanced training, prior to postings onto an OTU. He was tragically killed during this phase of training on 21 January 1943. The gentleman with in this photo is believed to be his South African Flying Instructor 'Panda' Watkins. His grave in England has a lovely headstone and the inscription: 'Service Above Self'. (As advised by Robert Richard Kudyba OAM).Brass plaque stating 4085537 Sgt R.R.F. Swords 23 Sept 1912 - 21 Jan 1943.

To finance the war the Commonwealth had a series of war loans, and then peace loans. All were over-subscribed. This plaque was made and presented to the Shire of Orbost in recognition of the Shire residents' contributions to the Peace Loan at the end of World War 1.A rectangular brass plaque with raised lettering and raised borders.Commonwealth of Australia / Peace Loan / A.D. 1919 / To commemorate the oversubscription of the allotted quota of this loan by the Shire of Orbost / R.P. Cameron ? W.A. Watt Treasurer, W.M. Hughes Prime Ministerplaque civic-memento orbos-shire peace-loan

A telescope is an optical instrument used to make distant objects appear nearer and larger, this item is small enough and designed to be portable enough to fit into a gentleman's pocket while out walking. This type, size and manufacture of the telescope was designed for general everyday use for bird watching and general observation of subjects while out walking. This item was not for marine use as its focal length is too short and could only observe subjects that were not too far away. Also, its size indicates telescopes of this type are pocket telescopes.This telescope is significant for its probable association with leisure activities of a person in the 19th century for leisure purposes such as bird watching, horse events and ship spotting.Three draw brass hand held telescope, folding.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, telescope, folding telescope, navigational instrument, optical instrument, pocket telescope, leisure, brass telescope, hobby

Circular brass with inscription HMAS AUSTRALIA 1928-1954HMAS AUSTRALIA 1928-1954

Leggings used by Australian Light Horse during WWII and Boer WarPair of leather leggings with leather straps and and brass buckles

The plaques originate from chairs donated towards the furnishing of the Mair Street premises of the Clarendon Presbyterian Ladies College opened 1926. The chairs were situated in Watson Hall. The chairs were donated by the Old Collegains Dramatic Society which commenced with an inaugural production 1 October, 1925. The Touchstone December 1925 records the performance took place in the St Andrews Hall begining with a comedy sketch entitled 'Such is fame'...the second half of the programme consisted of what was described as 'a Pot-Pourri of Old Fashioned Tunes'. Four brass plaques featuring fine border and inscription.Inscribed on obverse: ; GIFT OF / Clarendon Old Collegians / DRAMATIC CLUB / 1926plaque, old-collegians-dramatic-society, clarendon-presbyterian-ladies-college, chairs, watson-hall

The item was sent to Allan Frederick Goodall DFC, RAAF after the War in 1947 from a former German Soldier POW, it accompanied a letter Cat No 5787. Refer Cat No 543.2 for Allan's service details.Small hand made brass aeroplane representing a Fighter.souvenirs, model, aeroplane, pow

14972799, ASTON, Derg James Randell. Enlisted Worster (England) Ref 5400, 5402 Austria Occupational ForcesBadge, metal, brass insignia Austria Occupational ForcesCrown, Rose, Leaves Ïntelligence Corps"badge, military insignia, intelligence corp

The Memorial Hall commemorates those who served in World Wars One and Two. The Hall was originally erected in memory of those who served in World War One. The foundation stone was laid in 1924 by the Governor of Victoria, The Earl of Stradbroke. The hall was opened on ANZAC Day 1925. On ANZAC Day 1952, a memorial stone was added to commemorate those who served in World War Two. The building is situated 14A Ferrars Place , South Melbourne.The badge was struck in the mid 1920's on the opening of the Sailor and soldier's Memorial Hall, South Melbourne.Brass Badge Red and White Enamel with clasp on backFront Sailors and Soldier's Memorial Hall South Melbourne Remembrance Hall Image on Front Back J.W.Purvis (badge makers)south melbourne, soldier, remembrance, hall, sailors and soldier's memorial hall, sailors, the earl of stradbroke, governor of victoria

Many casings were decorated by troops and used as ashtrays & containers.It examples the quality of material [brass]used for shell casing at that time.Brass Shell Base with Lid Belgium 1916-1919BELGIUM ...1916_1919

The Bugle was played by the British over 2000 times to warn of impending air raids in the Middle East. When a new electronic siren was installed Bill Nicholls souvenired it and carried it in his haversack until he reached home. William Bona Nicholls No VX36468 2/24 Batt 9th Div. enlisted on 12.8.40, embarked 16.11.1940 for the Middle East, promoted L/Cpl 8.5.1941, served in the Seige of Tobruk, El Alamein and Middle East Campaigns. He was taken POW at Derna and escaped after 8 hours. Embarked for Australia 1.2.1943 and disembarked Melbourne 25.2.1943. Embarked for New Guinea 1.8.1943, hospital 5.12.1943 with Degue Fever, rejoin unit 9.12.1943, served in the Lae and Finschafen campaigns. Promoted Sgt 11.2.1944, embark for Australia from Finschafen 28.2.1944 and disembark Brisbane 7.3.1944. Evacuated to hospital 16.3.1945, appears to be Anxiety State. Discharged from the Army 3.9.1945 with the rank of S/Sgt.Copper & brass army bugle with nozzle & holding chain.Main section of bugle has: a lettered crest, & Besson & Co, London, 1940musical instruments - wind, military history, bugle, tobruk

Rising sun hat badge, brass with text at bottom."Australian Commonwealth Military Forces"numismatics-badges-army, metalcraft - bronzeware, passchendaele barracks trust, rising sun

Brass Artillery shell fuse that has been fired.Base markings NO II ME 4/11 16 VF 8/40arms - ammunition, military history, weapon accessories, artillery fuse

Reverend Alfred Gurney Goldsmith has two memorial plaques at the Mission to Seafarers Victoria. One in the the Mission's club room and this one in the Chapel of Saint Peter. He served as Senior Chaplain from 1905 to 1924 through a considerable period of upheaval including the building of two Missions between 1906 and 1917. For more information see 0639 an invitation to the laying of the foundation stone, 0704 a photograph of Reverend Goldsmith and his wife as well as the Mission's annual report from 1925 or contact the curator.Rev'd Gurney Goldsmith arrived in Australia in 1905, an experienced missionary with the intention of establishing a branch of the London Mission to Seamen. After a public meeting organised by the Victorian Mission to Seamen he entered into an amalgamation forging formal links with London, enabling a continuation of the services to seafarers, first commenced in 1857. Goldsmith also conceived the formation of an auxiliary, the Ladies Harbour Lights Guild, which was to play a significant role in support of the Mission and seafarers.Long rectangular brass plaque mounted to brick wall.To the glory of God and in loving memory of Rev. Alfred Gurney Goldsmith M.A. Chaplain 1905 to 1924reverend alfred gurney goldsmith, brass, plaque, memorial, chapel, hong kong, kobe, melbourne, lhlg, seamen mission, mission to seafarers, mission to seamen, chaplain

Small rectangular brass plaque mounted on wooden board.In appreciation of the interest and generosity of Miss Florence Rule February [1885]plaque, memorial, florence rule

Brass bell from the MV Austral Tide Bell

Corkscrew in the shape of a keyFrom a collection held in Greensborough.Brass key which pulls apart to reveal a corkscrew.corkscrews

A cigarette lighter is a portable device used to generate a flame. It consists of a metal or plastic container filled with a flammable fluid or pressurized liquid gas, a means of ignition, and some provision for extinguishing the flame. A spark is created by striking metal against a flint, or by pressing a button that compresses a piezoelectric crystal (piezo ignition), generating an electric arc. In naphtha lighters, the liquid is sufficiently volatile, and flammable vapour is present as soon as the top of the lighter is opened. Butane lighters combine the striking action with the opening of the valve to release gas. The spark ignites the flammable gas causing a flame to come out of the lighter which continues until the top is closed - naphtha typeA brass cylindrical cigarette lighter with ring to attached to a chain cigarettes, tobacco, cigaretter lighters, safety matches, moorabbin, brighton, cheltenham, pioneers, early settlers