Roman style chasuble, part of a full vestment set used in the Catholic Cathedral Ballarat in the 1920s. This style of vestment was superseded in the1970s following the second Vatican Council. This set is unusual in its use of art-deco design.The main component of a set of vestments for use in the Catholic liturgy rare in its use of art-deco style embroidery. Roman style.Symbolism of wheat and vine with central medallion of Christ as the Sacred Heart. Also a Chiro in lower section of orphery.vestment, chasuble, art-deco, sacred heart,

Gas mask similar in style to 1339.1, possibly dating from the 1940s. This mask and associated case were intended for noncombatant use i.e. for use by civilians during wartime.Khaki colour gas mask constructed from cylindrical tin with open valve filter, attached to a plastic mask which attaches to the face with adjustable canvas straps. Mask includes two circular cut outs with plastic windows with valve on left hand side. Printed instructions on canister. “MED ADULT” embossed on top centre of the mask component. On interior of mask, “US MI/LOT/7 3SC.”gas mask, equipment, civilian, gas warfare, second world war, world war two, world war ii, mustard gas, chemical warfare

Soft covered plastic-bound book with City of Knox falcon logo - City of Knox Heritage Study 1993 - A component of the Conservation Strategy.A report prepared by Margaret McInnes - Copyright City of Knox 1993 - Funded by the City of Knox.

Set of drawing excercises and examples of various machine components and structures associated with mechanical engineering. Drawn in ink on tracing paper. .1 - .23) engineering drawings, technical drawing, mechanical engineering, geoff biddington, drawings, plans

Used in the mid-seventies in petrology laboratories of BIAE.A petrographic optical microscope, with three objected lens turret. Black enameled frame, chrome components. Blonde polished wood storage box.TOWER No 19621. On frame self-adhesive sticker: "Ballarat CAE GEOLOGY"ballarat cae geology, microscope, petrographic microscope, scientific instruments, lens

"Marvel" Electric Food Mixer - two beaters affixed to cylindical component that encases electric motor with cord attached - this component attached to metal stand with swivelling device - all metal painted pale green including rotating stand for placing mixing bowl on - black plastic? handle on moveable top section and circular open holes on top and around the sides.Plaque affixed to cylindrical section reads "75 watt/VOLTS AC DC 25 STYLE 21 No 1304082/MARVEL/Electric Food Mixer/Licensed under United States Patents/No's......

A small, tennis racquet stringing machine, with a detachable tensioner component. Inscription: ATLAS CO./LONDON/E...S/PATENT. Materials: Metal, Painttennis

Part of a large donation of items once owned by members of the Christian-Washfold families of Kew. Henry Christian (c.1809-91) was one of the first settlers in Kew. He arrived in Victoria with his wife Agnes and son Orlando in 1855 on the Gypsy Queen. He established a rope-making business in Bulleen Road by 1858 but was declared insolvent two years later. In his final years, he was celebrated as one of the oldest living settlers of the district. His son, Orlando Henry Beater Christian (c.1853-1930) became a member of the Hawthorn Band and a foundation member of the Willsmere Swimming Club. Orlando and his wife Elizabeth had four children of which Henry Beater (1886-1962) was the oldest.Gold scales encased in a rectangular hinged Japanned tin case. Old label on inside of case unreadable. String requires repair and audit of components.gold scales, christian-washfold collection

This tie forms part of clothing which was owned by Walter Alexander Scott. Joined RAF December 1940 to be trained as a pilot, he got his wings December 1941, became a night fighter pilot after OTU and posted to 219 Squadron. Was posted to 603 Squadron December 1942 flying Beaufighters on coastal command convoy escorts, desert patrols, supporting Sicilian and Italian invasions (all from the N.African desert, then on Greek Island " Armed Rovers" until 10 November 1943, just at the end of ops, when he was shot down in the Aegean Sea and became a POW the next day 11 November 1943. Transferred to Germany he was in Stalag IVB for 3 months, before exchanging ID with an Irish soldier ,in order to get out of the main camp into a working sub-camp in order to escape. Post war Walter returned to Australia, he became "Citizen of the Year" in Werribee 1992 for his service to the community. In 1993 he was awarded the Order of Australia Medal for services to youth and to the retired.

This work box belonged to Miss Mary Southcombe who, with her parents Thomas and Mary came from Devon Wales to Portland on the sailing ship "Clara" in 1854. Later that year they settled in Belfast (Port Fairy). Miss Southcombe resided in Port Fairy all her life and carried a wonderful record of citizenship extending over a period of more than 80 years.This workbox used by Miss Mary Southcombe a pioneer of Port Fairy is also a beautiful piece of it's type.Pearl inlaid wooden sewing box with many compartments made of card and covered in purple silk each compartment had a lid made of the same componentsdomestic items, sewing, box, miss mary southcombe

FALLS CREEK ROPE TOWS Toni St Elmo brought back plans for a Hamilton rope tow from New Zealand. He had a rope tow built in the summer of 1950-51 and it went into operation the following winter. Skiers were charged 10/- per day to use it. Skiers held onto the rope with a locking device called a ‘nutcracker” attached to a webbing belt. This tow, known as the Nissen Tow, continued to operate until 1960. Bob Hymans installed a shorter portable rope tow for his guests at Skyline from 1954. Other tows included the Village Tow and the Nursery Tow. Eventually most of the tows were taken over by Alpine Developments. From 1960 onwards they were gradually replaced by T-bars and then later on by chairlifts. This belt is from the original rope tow used between 1951 and 1960 in the Falls Creek ski lifts. These items are significant because were part of the earliest rope tows constructed at Falls Creek.A canvas waist belt with leg hoops and metal joining and hook used to attach skier to the rope tow. The wheel is also a damaged component of the Rope Tow.falls creek, nissen alpine club, rope tows, toni st elmo

The Bocian is a versatile training sailplane that first flew in 1952. The type has been modified in several respects over the course of production by SZD (tailplane and rudder in particular). About 600 have been built; many for export to 27 countries (including Australia). The aerobatic capability and fine performance (best glide ratio of 26) has enabled the Bocian to be used to train competition pilots as well as those of lesser experience. Many world gliding records were set in the 1950s and 1960s in Bocian gliders. The Museum’s example is a type D test flown in Poland on 3 and 4 April 1963. It was imported into Australia in September 1963 by Austerserve Pty Ltd. The first owner was the Alice Springs Gliding Club and the glider had name “Cumulus” painted on the side of the fuselage (since removed). The glider had recorded 726 hours 46 minutes flying time from 2138 launches as at July 1967 when it was transferred to the Darwin Gliding Club. It appears that the glider was damaged in June 1968. The substantial repairs to the fuselage, both wings and tailplane and other minor repairs were completed on 13 October 1968. The glider continued flying with the Darwin Gliding Club until August 1969 at which time the service to that club amounted to 59 hours 7 minutes flying time from 348 flights. Between August 1969 and August 1976 no flights are recorded in the logbook. It is understood that on its last flight at Bachelor, south of Darwin in the Northern Territory (August 1969) it was severely damaged when it crashed after spinning while being auto-tow launched (although this is not expressly mentioned in the logbook). Reg Hancock purchased the damaged glider and rebuilt the port wing and restored it to airworthy condition (September 1976). It was then transferred to Colac, Victoria, and used by the Colac Gliding Group at the Yeo airfield until February 1981, adding another 153 hours from 403 flights to the glider’s record. After airworthy inspection in September 1982 the glider was used by the Geelong Gliding Club until 1983 (logbook details not held). The 20 year survey was then due and the glider fell out of service. In the course of the most recent restoration attempt it was discovered that the glue used in construction had deteriorated and that it was no longer feasible to bring it back to an airworthy condition. Subject to restoration, this exhibit may be representative of the 1950s - 1960s Bocian two seat sailplane typeThis exhibit is a large two seat glider /sailplane of wood and fabric construction. All components are present with the exception of instruments. However, at the time that the aircraft was transferred to the Museum it had been taken apart for major restoration work. As received it is stripped of the top coats of paint and a number of components (including, amongst others, tip fairings, nose cone and cockpit elements) that were removed for facilitating the repair process. The glider, serial number 803, was registered as VH-GNLaustralian gliding, glider, sailplane, bocian, cumulus, alice springs gliding club, darwin gliding club, colac gliding group, geelong gliding club, hancock

Mrs Potts Sad Iron Set . This double point design with detachable handle was patented in the United States of America by Mary Potts in 1871. It was sold in sets of three bodies with one handle and a stand or trivet. The detachable insulated handle was designed to always remain cool for ironing. The handle was detachable, so that several irons could be on the stove at one time and the handle swapped between several bodies. This item is an example of an invention that was universally adopted to make the task of ironing safer and more efficient.A set of double pointed flat irons which detachable handle. This set includes a trivet to rest the unused iron on. All components are made from cast irondomestic appliances, flat irons, sad irons, mrs potts irons

Pencil on paper student's technical drawings .1) Diaphragm valve assembly and main components .2) Diaphragm valve detail and parts .3) Centrifugal pump detailstechnical drawing, lyall e campbell, diaphgram valve, centifugal pump, school of mines ballarat

Framed watercolour depicting a group of soldiers working of a Chieftan Tank, a crane mounted to an APC lifts a component into the back of the tank. Two Huey Helicopters and a Chinook fly overhead.chieftain tank, armoured personnel carrier, chinook, huey helicopter

Lawn Tennis Club medal featuring crossed racquets and motto: 'STRIKE HARD AND FEAR NOT'. Attached to tricolour ribbon with filigreed metal pin component. Materials: Metal, Ribbontennis

Many farming families in the district kept bees as a source of honey for home consumption. This item was made for use on the family farm. Most of the equipment used in the local industry was homemade.During the early to mid 20th century bee keeping was a significant rural industry in Dunkeld and surrounding districts. It is believed that there were nearly twenty apiarists operating in the area. Honey in large quantities was railed to Melbourne for sale.Homemade bee smoker consisting of a copper cylindrical firebox and rectangular bellows constructed of wood and leather. Components are assembled with rivets, scrap wire, sheet metal, nuts and bolts and nails.

Bought new in the late 1950s by Mr Les Swaby of Greensborough. This is an excellent example of what a 'portable communication device' was viewed as in the 1950s and 1960s. Les was a member of the Greensborough State School Committee, Watsonia Progress Association and Watsonia High School Parents and Friends Association and was Honorary Secretary of each.This typewriter is of historic significance and provenance as it can be directly linked to original items of correspondence held at the Public Records Office of Victoria from the Department of Education under the file for Watsonia High School (WHS), Greensborough. Correspondence from various community and school groups of which Mr Les Swaby was a member was actually generated on this typewriter. Our Society has exhibits related to WHS which includes the correspondence to and from the Victorian Education Department and serving Ministers during the 1950s and 1960s.Contained within a black portable carry case. The actual typewriter is also black and made primariily of all metal components including the typewriter casing. Overall weight is 7kg approx. Olympia Werke West GMBH watsonia, watsonia high, watsonia high school, les swaby, typewriters, olympia

Destination indicator equipment that was fitted to a C class tram - dot matrix style, set to the word "CITADIS" with inbuilt control equipment and computer control plugs. Installed within a metal box, with detailed wiring, plastic components and electrical components. Has a loose wire with two pin plug in the bottom left hand corner of the unit. Three labels on the rear control unit - no formal manufacturer name - perhaps DUHAMEL and other ID items.trams, tramways, destination indicators, c class, citadis, transport equipment

Maroon buckram hard cover book, originally gold embossed label, 144 pages. Illustrated with pictures, electronic data, valve layout, component data, metric data, signal codes. Handwritten inside cover: “5 R I M U”books-military/reference, engineers, radio

Demonstration panel for explaining how tennis balls are manufactured. Shows raw materials and components of tennis balls in downward sequence to a complete ball. No text. Materials: Felt, Rubber, Metal, Woodtennis

This filter is part of a complete set of a German gas mask dating to the First World War. This may have been a spare filter which was attached to a mask.Khaki coloured gas mask with leather face mask component. Two metal circles border plastic lenses of goggles which in turn have wire frame behind. Gas mask twists onto filter component which is a metal cylinder shape with layers of metal mesh inside; filter is removable. Mask has canvas band on interior for sweat absorption or comfort; attached to which are six straps which converge into loop at back of head.german, germany, world war i, world war 1, first world war, the great war, chemical warfare, gas mask, gas warfare, mustard gas

Used at the Ballarat School of Mines Petrology classes. Probably a second generation petrological microscope used at SMB. Earlier reference ; to " Petrological Microscope" is made in SMB 1908 - 9 calendar page 35. Reference to "Mineral Microscopy" found in calendar for 1896, page 47. Petrographic Microscope with two-lens objective turret in a timber case. The microscope black enameled frame with brass components. Housed in a polished wood case. Three additional polarizing filters in accessory drawer. "E. Leitz Wetzlar No. 139041 Made for Kilpatrick & Co Melbourne" A removable label inside storage case door, dated "I.II.1912" and stating the obtainable magnification ratios.ballarat school of mines, geology, petrography, microscope, scientific objects, scientific instruments