Straight razors were once the principal method of manual shaving but have been largely overshadowed by the safety razor, which incorporates a disposable blade.Straight razors were once the main method of shaving, This razor with the BENGALL mark was known for its quality on an international scale. During WW11 Cadmans supplied the defence forces with 250,999 razorsCut Throat Razor by 'T R Cadman & Sons Sheffield England'. It has a metal blade, a cream coloured bakelite handle, with a pin hinge for folding to cover blade.Bengall R. Cadman & Sons Sheffield Englandrazor grooming cut-throat-razor

Swords were issued to Australian Light Horse in 1918. Light Horse in period 1920 - 1940 were equipped with swords. Some soldiers including Trooper G R Fear chose to obtain their own swords. Trooper Fear served with 2/9th Armoured Regiment during World War Two. 8/13 VMR Heritage Troop carried swords and gave exhibitions of tent-pegging during 1980s.Part of collection relating to an Armoured Corps soldier of WW11British Model 1908 cavalry sword with steel blade 890mm long, composition handle with steel handguard, painted steel scabbard with 2 fixed rings. Painted khaki greenON blade 12 A 15 EFD On back " 08 "military, sword, fear, light horse, militia

A hacksaw is a fine-toothed saw, originally and principally for cutting metal. They can also cut various other materials, such as plastic and wood; for example, plumbers and electricians often cut plastic pipe and plastic conduit with them. On hacksaws, as with most frame saws, the blade can be mounted with the teeth facing toward or away from the handle, resulting in cutting action on either the push or pull stroke. In normal use, cutting vertically downwards with work held in a bench vice, hacksaw blades should be set to be facing forwards. A steel hacksaw with a wooden handle but without blade

Made at Camp 3 Tatura in WW2 by internees. The blade is made from a broken cross cut saw and the handle from a broken hickory axe handle.handmade carving knife with steel blade and wooden handlecarving knife, camp 3, tatura, !, domestic, items, food, preparation

owned by Mr John Greenwood, of Cox Street Port Fairysafety shaver in wooden case, containing directions for use, frame, seven blades, stropping machine, and blade holderFrame: Wilkinson/made in England . Blades: Wilkinson sword co ltd Hand forged made in England Reverse side: Wilkinson Special edge etched with a day of the weeklocal history, personal effects-toilet requisites, shaving, greenwood, mr john

This can opener was designed to open small as well as large cans. It has a sliding blade that can adjust to the size of the can and sharp hook on the end. It made of steel and has a wooden handle. Steel spike with wooden handle and adjustable blade. cooking, can openers

Bread knife used in Kawarau, former kindergarten, boarding house, master's home and current Administration building. Stainless steel blade, metal fixture and wooden handleInscribed on face of blade: Bread Knife / Leppington (Cutlers) Ltd / Sheffield, Eng., /Firth Brearley / Stainless Sheffield Eng. Stainlessknife, kawarau, leppington (cutlers)

A draw knife or drawing knife, draw shave, shaving knife is a traditional woodworking hand tool used to shape wood by removing shavings. It consists of a blade with a handle at each end. The blade is much longer along the cutting edge than it is deep (from cutting edge to back edge). It is pulled or "drawn" toward the user. A draw knife is commonly used to remove large slices of wood for flat faceted work, to debark trees, or to create roughly rounded or cylindrical billets for further work on a lathe, or it can shave like a spokeshave plane, where finer finishing is less of concern than a rapid result. The thin blade lends itself to create complex concave or convex curves such as in making staves for barrels.A specialised tool used in many different types of wood working and in the making of barrels, this type of tool has been used for many hundreds of years by coopers and other woodworking craftsmen all around the world. It is a tool that has not changed in design during this time and is still used today by craftsmen in the making of wooden barrels for the storage of wines etc. However this item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset as it is believed to have been produced before 1950.Draw knife with metal curved blade and two wooden handlesNoneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, draw knife, coopers tools, woodworking tools, knife, cooperage

A draw knife or drawing knife, draw shave, shaving knife is a traditional woodworking hand tool used to shape wood by removing shavings. It consists of a blade with a handle at each end. The blade is much longer along the cutting edge than it is deep (from cutting edge to back edge). It is pulled or "drawn" toward the user. A draw knife is commonly used to remove large slices of wood for flat faceted work, to debark trees, or to create roughly rounded or cylindrical billets for further work on a lathe, or it can shave like a spokeshave plane, where finer finishing is less of concern than a rapid result. The thin blade lends itself to create complex concave or convex curves such as in making staves for barrels.A specialised tool used in many different types of wood working and in the making of barrels, this type of tool has been used for many hundreds of years by coopers and other woodworking craftsmen all around the world. It is a tool that has not changed in design during this time and is still used today by craftsmen in the making of wooden barrels for the storage of wines etc. However this item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset as it is believed to have been produced before 1950.Draw Knife bent blade, metal with two wooden handlesNoneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, draw knife, coopers tools, woodworking tools, knife, cooperage

This blade is to be used with a Dial O Matic Food Cutter. It is used for cutting and shredding vegetables. A stainless steel French Garnishing Cutter in its original box. The box is red cardboard with yellow print. The blade is used with the Deluxe Dial O Matic Food Cutter invented by Ron Popeil. The blade is 1877.1 and the box is 1877.2.On box - French Garnishing Cutter, stainless steel $1food-preparation kitchen-gadget garnishing-cutter-blade

"First described by Professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969.Right hand stainless steel size 3 Macintosh interchangeable laryngoscope blade with light bulb, attached to a standard sized handle with serrated grip and no batteries inside deposit. Minor scratches and hit marks are over its surface. A blue sticky tape is attached to the back side of the blade where the size and type is, also can be found the mark left by a previous sticky tape around the top neck of the handle. The blade was made by Penlon in England.Engraved in cursive writing above the light bulb, Royal Childrens Hospital Engraved in capital writing above the light bulb next to previous text, D.A. Stamped at the back side of the blade, MACINTOSH / 3 Stamped at the blade base lateral side, REGD. TRADE MARK / PENLON / MADE IN ENGLAND Stamped at the blade back side, STAINLESSlaryngoscope, macintosh laryngoscope, macintosh blade, light bulb

Martin Crane was the first Bishop of Sandhurst. 1874 - 1901. The knife was probably a gift and is engraved on the front with his name. Martin Crane was a progressive leader in Sandhurst and built many new schools and churches in the Diocese. The knife is significant because it belonged to the first Bishop of Sandhurst, Martin Crane. Irish born Crane was an Augustinian priest before being ordained in 1874. Crane was Bishop of Sandhurst for 27 years. Elaborately engraved sterling silver knife. Floral, leafy design. Probably a cheese or butter knife. The handle sits 90 degrees to the knife blade. This a part of a cutlery set. Bishop. M. Crane. Engraved on the front of knife. Silversmith's name/symbol engraved on the back of knife blade. Sterling. P??? engraved on the back of knife blade. knife, silverplate, cutlery, catholic clergy

Early settlers in Moorabbin Shire used these hay cutters to provide food for their Draught Horses , the family cow and clear pasture. The blade was very sharp and using a swinging action efficiently cut the long grass.Hay cutters were an essential tool for the early settlers, market gardener and dairy farmers in Moorabbin Shire c 1880A long curved steel blade with a long wooden handlepioneers, early settlers, market gardeners, dairy farmers, moorabbin, brighton, dendy henry, tools, hay cutters, blacksmith,

Sharped Edged instrument used for cleaning hair from the skin. http://en.wikipedia.org/wiki/Straight_razor A straight razor is a razor with a blade that can fold into its handle.[1] They are also called open razors and cut-throat razors. HISTORY The first modern straight razor complete with decorated handles and hollow ground blades was constructed in Sheffield, England, by Benjamin Huntsman in 1740. Huntsman's process was adopted by the French sometime later. The English manufacturers were even more reluctant than the French to adopt the process and only did so after they saw its success in France.[5] Straight razors were the most common form of shaving before the 20th century and remained that common in many countries until the 1950s. TODAY Straight razors are still manufactured. DOVO, of Solingen, Germany, and Thiers Issard of France are two of the most well-known European manufacturers. Feather Safety Razor Co. Ltd. of Osaka, Japan makes a razor with the same form as a traditional straight, but featuring a disposable blade that can be installed through an injector-type system. Modern straight razor users are known to favor them for a variety of reasons. Some are attracted to the nostalgia of using old and traditional methods of shaving. It is a masculine ritual comparable to pipe smoking. Others profess an interest in reducing the waste of disposable blades.[11][22] Still others agree that straight razors provide a superior shave through a larger blade and greater control of the blade including the blade angle. Straight razors cover a much greater area per shaving stroke because their cutting edge is much longer than any of the multiblade razors. Ivory cut throat razor, with cream case 00121.3.Known as a straight razor.Razor with square point, full hollow ground 5/8” blade and double transverse stabiliser. The centre pin adds stability and rigidity to the handle---I think this is it ROM Parts The narrow end of the blade pivots on a pin, between 2 pieces of ivory forms the handle. LONG EXTRACT FROM WIKI _ SHORTEN to describe 00121 The parts of a straight razor and their function are described as follows: The narrow end of the blade rotates on a pin called the pivot, between two protective pieces called the scales or handle. The upward curved metal end of the narrow part of the blade beyond the pivot is called the tang and acts as a lever to help raise the blade from the handle. One or two fingers resting on the tang also help stabilize the blade while shaving. The narrow support piece between the tang and the main blade is called the shank, but this reference is often avoided because it can be confusing. The shank sometimes features decorations and the stamp of the country of origin. The top side and the underside of the shank can sometimes exhibit indentations known as fluting, or jimps for a more secure grip.[8] The curved lower part of the main blade from the shank to the cutting edge is called the shoulder.[9] The point where the shoulder joins the cutting edge is called the heel. A thick strip of metal running transversely at the junction where the main blade attaches to the shank is called the stabiliser. The stabiliser can be double,[10] single or can be absent in some razor models. The first stabiliser is usually very narrow and thicker and runs at the shank to blade junction, covering the shank and just spilling over to the shoulder. The second stabiliser can be distinguished since it is considerably wider and narrower, appearing after the first stabiliser and running lower into the shoulder. The non-cutting top of the blade is called the back or the spine while the cutting part of the blade opposite the back is called the cutting edge.[11] Finally the other free end of the blade, at the opposite end of the tang, is called the point and, sometimes, the head or the nose.[9][12] There are two to three pins in any handle. The middle pin, if present, is plastic coated and is called the plug.[13] Its function is to stabilise the sides of the handle so that they cannot be squeezed in the middle. When folded into the scales, the blade is protected from accidental damage, and the user is protected from accidental injury. During folding, the back of the blade, being thick and normally with a curved cross-section, acts as a natural stopper and prevents further rotation of the blade out of the handle from the other side shaving, lever, handle, blade, pivot, razor, tang

A hand slasher with a long wooden handle and a heavy sharp steel rectangular blade attached with rivets to the handle. It was efficient for clearing thin and dense low-lying scrub, ferns or bush where an axe would be too clumsy. '232205' is stamped on the flat blade but the writing is Indiscernible. tools, agricultural equipment, agricultural tools, slashers, gardening tools

Used in the 19th Century'THE ANDYO' registered Hedgehog Tool. A forged steel head of a general purpose hoe with one side of the blade used as a hoe and the other pointed side possibly used to dig small furrows. It was made by Cornelius Whitehouse & Sons at Cannock Edge Tool Works - Branded Whitehouse & Sons. It was used in the 19th century.'THE ANDYO' is stamped on the pointed blade. On the hoe blade is stamped - Whitehouse & Sons CANNOCK. 'TY GWYN. agricultural tools, hoes, gardening tools, gardening hoes, steel

A scythe is an agricultural hand tool that cuts grass and is used by making large sweeping motions through the crop. Eventually replaced by horse-drawn or motorised machinery, they are occasionally still used as they are inexpensive and efficient. There are different types of scythes with larger or smaller blades. This particular scythe was manufactured by W.A Tyzack & Co. Ltd. Set up by William Tyzack in the early 1800s in Sheffield, United Kingdom, they grew into a larger manufactory specialising in agricultural tools. Adding the ‘Horseman’ brand to their trademark in 1948, they expanded dramatically and exported throughout the Commonwealth.Donated by Wilfred Dungan on behalf of the Dungan family Collection originally used on the property of the late Dr Rae Dungan in Falls Creek Rd Olinda, purchased in the late 1930s from Olinda pioneers Harry and Minnie Holden. Also on the property of late May Farndon of Farndon’s and Falls Rd Mt Dandenong – aunt of Dr Rae William Dungan and also an early pioneer. Family holidays and weekends involved use of these sorts of farm implements plus working with horses. Post-war, the Olinda hand tools and machinery moved to the Shady Creek, Nilma North area where bush, pasture and cows had replaced the Olinda property. Wilfred well remembers being on one end of the crosscut saws cutting fence posts, logs and timber under “the tireless and vocal instruction” of a red headed local Darnum Rd legend called Harry Collyer. “He drove an old Rugby car and nearly pulled me through the logs with every cut!” Cast steel blade. Hole on back and of blade for hanging. Steamed handle (may not be original). Complex pipe/nut washer and five metal shims keeping blade on handle.From tip: BEST CROWN W.A. TYZACK & CO. LTD STELLA WORKS SHEFFIELD. Near handle: image of figure on horse.churchill island, scythe, wa tyzack, sheffield, machinery

A Whetstone is a sharpening stone used for knives and other cutting tools. Sharpening stones, water stones or whetstones are used to grind and hone the edges of steel tools and implements e.g. scissors, scythes, knives, razors and tools such as chisels, hand scrapers and plane blades. Though it is sometimes mistaken as a reference to the water often used to lubricate such stones, the word "whetstone" is a compound word formed with the word "whet", which means to sharpen a blade, not the word "wet". The process of using a sharpening stone is called stoning.A square block of grey abrasive material used for sharpening steel blades , with the original boxBRIDESTOWE / Picture of ‘Kangaroo, Stag and Emu among radiating wheat stalks’ / TASMANIAwhetstones, sharpeners, steel blades, tools, cutlery, razors, moorabbin, bentleigh, cheltenham, early settlers,

A straight razor is a razor with a blade that can fold into its handle. They are also called open razors and cut-throat razors. This example of a straight razor was made in Germany for the export market by ERN. The company was registered in 1874.Steel and ebonised wood straight razor in original caseCase: "The Famous es-ex razor". Blade: "Made in Germany"es-ex razor, straight razors, cut throat razors, ern - germany

“Penlon was founded as Longworth Scientific Instrument Co. Ltd, in 1943, in Oxford, by personnel from the Department of Anaesthetics at Oxford University.” (Ref. Retrieved from URL 2015: http://www.penlon.com/en/us/about/history.html ) Magill type blade to fit Longworth handles adult size without light bulb and without hinge at the back of the blade. Visible dust veil over its surface with presence of small oxidation spots mostly over the blade canal and base. Almost non used contact studs on base and lateral side at the light bulb connection. It has stamped on the blade base the fitting type name and the place where it was made.Stamped at the fitting base of the blade in cursive writing, Longworth Stamped at the fitting base of the base in capital writing below the previous text, MADE [I]N ENGLAN[D] longworth, magill, blade, adult blades, penlon

"First described by professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969. Macintosh semi curved blade designed in a baby size, with an unfitted light bulb attached. Minor scratches and some slight hit marks over the piece surface caused by its previous use. It has the manufacturer name and the place where it was made along with the owner’s name engraved at the back of the blade. Engraved at the back of the blade near light bulb the owner details: R.C.H. / O.P.T. Stamped at the back blade base into metal the manufacturer's name and place: Longworth / MADE IN ENGLAND Stamped on light bulb base serrated surface, HEINE XHL / #059 2,5v paediatric blades, royal children's hospital, macintosh, light bulb, longworth, blade, laryngoscope

Kukri knife as used by Ghurka soldiers in Burma. Curved steel blade with bone handle. Leather sheath with steel tip. Bone handle decorated with ivory dots and brass pins. Missing the two smaller knives.Blade adorned with intricate scroll and flower etching and the word INDIA .

This cut-throat razor was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was physician, surgeon and chemist. In 1926, he was appointed as new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the on the Australian Commonwealth Line’s T.S.S. Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill ) According to Berry, her mother Gladys made a lot of their clothes. She was very talented and did some lovely embroidery including lingerie for her trousseau and beautifully handmade baby clothes. Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928 . Its first station was in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill and purchased a share of the Nelson Street practice and Mira hospital (a 2 bed ward at the Nelson Street Practice) from Dr Les Middleton one of the Middleton Brothers, the current owners of what previously once Dr Tom Ryan’s practice. Dr Tom and his brother had worked as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He had been House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan had gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. When Dr Angus took up practice in the Dr Edward and Dr Tom Ryan’s old premises he obtained their extensive collection of historical medical equipment and materials spanning 1884-1926. A large part of this collection is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station. and an ALDI sore is on the land that was once their tennis court). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served as a Surgeon Captain during WWII1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. He had an interest in people and the community They were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Cut-throat razor, part of the W.R. Angus Collection. Razor model No. 42, steel blade, in dark cardboard box, with bone handle, arrow shaped end; blade swings inside the handle. Razor made in Germany with blade made in Sheffield, England, in early 1900’s.Embossed on box "No. 42 / DES GERMAN MANUFACTURE", on handle "GOTTA", on blade "HAMBURG RING / REG. GOTTA REG. / SUPER FINE" and "FINEST SHEFFIELD STEEL / FORGED AND - - - HOLLOW / GROUND IN GERMANY" flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dr w r angus, dr ryan, cut-throat razor, gotta razor, german made razor, personal effects 1900's, grooming equipment 1900's

WW2 Sword Donated by Mr Peter CottonWWII Sword metal with metal handle and hilt with clip that scures it in Scabbard when sheathed. Metal handle has xxx pattern. D shaped hilt. Refer 0063-02 (Scabbard)) Hilt extends out 3mm from the rear of the blade to protect the users hand and fingers.Number 74428 recorded on blade near handle.

A saw is a tool consisting of a tough blade, wire, or chain with a hard-toothed edge. It is used to cut through material, very often wood, though sometimes metal or stone. The cut is made by placing the toothed edge against the material and moving it forcefully forth and less vigorously back or continuously forward. This force may be applied by hand, or powered by steam, water, electricity or other power sources. An abrasive saw has a powered circular blade designed to cut through metal or ceramic. In ancient Egypt, open (unframed) saws made of copper are documented as early as the Early Dynastic Period, circa 3,100–2,686 BC. Many copper saws were found in tombs dating to the 31st century BC. Models of saws have been found in many contexts throughout Egyptian history. As the saw developed, teeth were raked to cut only on the pull stroke and set with the teeth projecting only on one side, rather than in the modern fashion with an alternating set. Saws were also made of bronze and later iron. In the Iron Age, frame saws were developed holding the thin blades in tension. The earliest known sawmill is the Roman Hierapolis sawmill from the third century AD used for cutting stone.The subject item is believed to date from around the mid to late 20th century and is regarded as a modern item. The maker is unknown but the pattern or design and type of wood used indicate it is a tool of modern manufacture. Compass saw blade with wooden handle attached with wingnut.Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, wood cutting, wood saw, cross cut saw, cabinet makers tools, wood working tools, tool

Curved Acrylic (probably) or tortortoise shell handled cutthroat/straight razor with steel blade. Two handle pieces known as 'scales'. Blade hinged through handle with rivet at one end. Thumb notch as part of blade continues past hinge. Two more rivets attach two pieces of handle together; 1st rivet with spacer 4cm from hinge rivet, 2nd rivet at opposite end to hinge. Handle:Gold decorative writing-Flic R with 'REGD' enclosed below on one side approx 9 cm from hinge. 2nd side no inscriptions. Blade: Side 1- FLIC enclosed in rectangular parrallelagram next to hinge. Etched 'gold' decoration and inscription along back edge. Inscription reads 'FLIC GOLD'. Blade: Side 2- Near Hinge- MADE IN GERMANY FROM BEST FLIC SILVER STEEL. Blade: Back edge- Serrations for 5cm from hinge.

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, maximising efficiency and labour division. Donated by Wilfred Dungan on behalf of the Dungan family Collection originally used on the property of the late Dr Rae Dungan in Falls Creek Rd Olinda, purchased in the late 1930s from Olinda pioneers Harry and Minnie Holden. Also on the property of late May Farndon of Farndon’s and Falls Rd Mt Dandenong – aunt of Dr Rae William Dungan and also an early pioneer. Family holidays and weekends involved use of these sorts of farm implements plus working with horses. Post-war, the Olinda hand tools and machinery moved to the Shady Creek, Nilma North area where bush, pasture and cows had replaced the Olinda property. Wilfred well remembers being on one end of the crosscut saws cutting fence posts, logs and timber under “the tireless and vocal instruction” of a red headed local Darnum Rd legend called Harry Collyer. “He drove an old Rugby car and nearly pulled me through the logs with every cut!” steel blade, wooden handle and peg grip. Single person sawcrosscut, saw, churchill island, tool

Page turners were used in churches and synagogues to read Holy books, to turn pages in huge manuscripts and books (and later newspapers) as well as open double pages without a sharp knife (letter openers). This was from the home of W.J. Sebire in Wandin.A highly polished cream coloured long vintage celluloid page turner used for reading. It has a curved round ended long smooth blade which is paler than the darker short round pointed handle. Both sections have small dark brown fine floral designs on one side. There is a 3mm crack all round near where the handle meets the blade. On one side only are small dark brown floral patterns on the handle and one on the blade.page turners, holy books, celluloid