Belonged to Capt Warick Rosenthal No TX6321 AAMC. Refer 622.3, 775..1) Uniform Buttons, Brass metal, gold coloured round with centre crown over map of Australia with lettering around outside" Australian Military Force" .2) as abovebuttons army, uniform

Demonstrates the manufacture of uniform items and their use in uniforms for tramway crews in Ballarat.Four No. brass SEC buttons, small, used in caps to retain the cap band (plastic - See Reg Item 4451). Made with three parts, front pressing, base and loop. Front is the SEC logo, back has the manufacturers name stamped in, "Stokes Sons" (Stokes and Sons Melbourne).tramways, trams, sec, cap, uniforms, buttons

This jacket appears to be part of the uniform of a junior officer of the 11th (North Devonshire) Regiment of Foot, a line infantry regiment of the British Army. Several companies of the regiment were stationed in Sydney and Hobart between 1845 and 1857. The jacket was acquired by Brighton Historical Society around 1971 as part of a collection of clothing belonging to the Ward Cole family of 'St Ninians', 10 Miller Street, Brighton. George Ward Cole was an early member of the Victorian Parliament and his family featured prominently in Melbourne Society in their time; the family lived at St Ninians from around 1841 until the early 1900s. It is not known who the jacket belonged to or how it came into the Ward Coles' possession. While George Ward Cole was a military man, his service was with the British Navy and during an earlier period than is indicated by this jacket (1807-1817).A red and green flocked cotton military jacket believed to be part of the uniform of the 11th (North Devonshire) Regiment of Foot. The jacket features a green high stand collar secured at the throat by three brass hook and eye closures. The red jacket bodice secures down the centre front with fourteen brass buttons and finishes approximately at the navel. The bottom line sits on the waistline at the sides and back, tapering lower to the naval at the centre front. The bottom line features two substantial brass hooks one on either side of the waist to secure the jacket to the pants. The shoulder line of the jacket is a neat tight fit on the true shoulder, with a slim fitting curved sleeve with gathered fullness at the shoulder. On each shoulder is a metallic corded epaulet with North Devon XI button and second button with floral motif. At the base of the sleeve is a green cuff like detail with a curved elongated point towards the elbow. At the base of each sleeve is a further two brass regiment buttons. The cream woolen jacket lining is lightly quilted over the breast.st ninians, george ward cole, brighton, military, british army, devonshire regiment, north devonshire regiment of foot

Refers to the service of 1202494 Sapper "Greg Crack"..1) Jacket, wool, khaki. Four front pockets. Top two shut with brass metal buttons. Collars have RA Coy copper badges on. It is lined with a green polyester material. missing one brass butto on front. .2) Trousers - khaki wool/polyester. .3) Lanyard - purple woollen with knot..1) Written on label is “1202494 - Crack G.” .2) “893 CRACK”uniform, army, survey regt, greg crack, passchendaele barracks trust

Baggy, khaki shorts waist held by two straps of same material. Buttons plain brass. Commonly called Bombay Bloomers.uniform, shorts, bombay bloomers

Army green webbing 10 pouch ammunition belt. There are ten compartments to place M1 Ammunition clips, fitted with brass clip closure buttons. the belt is adjustable in length and has a brass waist clasp.Faded diagram of a right facing arrow, inside the webbing before the waist clasp.passchendaele barracks trust, ammunition, usa, m1 10 pockets

Refers to the service of "Lt. R. Baker" 5/13385..1) Jacket, black wool. Four front pockets. Rising Sun on Collars. Lieut. pips (2) on each epaulette. Four brass buttons on front. Button Motif - Australian Military Forces. On left chest are two ribbons, War medal 1939-45 and Australian Service Medal, and an RAAF Flying wings badge. .2) Trousers, black wool, Red stripe down outside of legs. Button fly, striped lining around waist line inside. Two side and one rear pocket. .3) Shirt - off white cotton, long sleeves, one breast pocket. .4) Cap - peaked black, red band, Rising Sun Badge. .5) Tie - black .6) .7) Shoes - pair of black leather, rubber soled shoes L & R.Inside jacket - “Lt. R. Baker 5/13385 2/11/51”ww2, post ww2, mess dress uniform, r. baker, passchendaele barracks trust

1. Red woollen jacket with white facings and white cuffs. On the collars are a 38Bn NVR badge. On epaulettes are - Brass letter "R". Brass Major's badge, small brass button - motif is Australian Military Forces. The jacket is lined with red cotton. 2. Red woollen vest, cotton backing. Two small pockets, Four small brass buttons - motif is Australian Military Forces - vest lined with white cotton. 3. Black trousers, wool with a red wool stripe on outside seam (4cm wide). Button fly (6 buttons) Pockets are white cotton, waistband lining is blue and white striped cotton. Small piece of leather at bottom of trousers at back. Two side pockets. One back pocket on right. Two buttons on each side of fly (for braces) two buttons at back.3. Written on right front pocket in black ink "SULLIVAN C4".post ww2, uniform, officers mess dress, passchendaele barracks trust

The items were part of a collection relating to Frederick Campbell Moller No 2233 AIF. Refer Cat No’s 1661.3, 1680.3, 1682.5, 1663P..1).2) Two matching buttons, brass, British coat of arms with crown. .3) .4) .5) Three buttons with Centre cross with stars, crown at top. .6) Sabre pin shaped like a sword/rapier, brass, with handle and a hilt..1) On rear, “Firmin & Sons London - Smith & Wright limited Birmingham” .3) .4) “Bryon Bros London” .5) “H W MARTIN LONDON”unfirom - accessories, costume accessories - clothes, accessories, metalcraft - brassware

Probably uniform buttons from World War 11 (1940_45) 0r after as world War 1 forces were referred to as Australian Imperial Forces.Three Brass & copper alloy buttons from a military uniform. Two large buttons and one small with a loop on back for sewing to uniform. Each button features relief text encircling the button edge and with an outline of Australia & Tasmania surmounted by an Imperial crown.Text on perimeter:'Australian Military Forces'costume accessories, haberdashery, military history, army

Typical British and Commonwealth full dress cap for 1950sBlack peaked cap with black wool crown and red piping and hat band. Royal Australian Artillery gilt cap badge. Black patent leather chin strap with 13mm dia. brass AMF buttons. Black patent letter peak with 20mm gold wire edging and green undersides. Tan leather sweat band. Tan cloth lining with green printed manufacturer's name and purple stamped details Green printed. "Hobson & Sons (London) Ltd. Purple stamp. "1952 6 7/8 Made in England" Note - no personal markingsheadgear, cap

No information is known about Mrs Mc Lean or her father. These buttons appear to come from a British Navy uniform and may date back to the 19th century as British Navy buttons today have a crown on top of the anchor. . These buttons have local provenance but the details are unknown. They are very good examples of early British naval Buttons so have considerable significance. the 1970's mounting of these buttons has been retained for historical reasonsSix brass concave circular buttons and two smaller identical buttons secured through a crudely cut rectangular piece of cardboard. The buttons feature a raised anchor and rope. The back of the cardboard has blue lined paper adhered to it. Through the paper are pieces of brass rings. Naval buttons given by Mrs McLean of he father's Uniform

Clothing. Dark navy blue and red peaked hat or cap, with peaked shade over the face, featuring two heavy gold leaves 12 cm long, and curved from the sides of the shade, to meet in the centre. These may be woven or moulded gold work.A 1 cm wide black patent ribbon is held across the lower crown of the cap, with 2 x 2 cm diameter brass buttons - one at each end. Narrow braid (probably once gold braid) edges the 5.5 cm deep crown of the cap, which is dark navy in colour. A flat dark navy top of the crown is lined, and shaped on the underside with red woollen fabric. This is shaped to be wider and higher at the centre front. Two eyelets on either side of this section, ventilate the crown of the cap. A brass metal ''music stand'' topped by a crown and an oak leaf and acorn wreath at the sides is attached to centre front. A 5 cm wide leather band lines the crown, which is also lined with red cotton fabric, and a diamond shaped plastic ''hair-oil protection'' at the top of the crown.Inside crown, on a plastic protector, is a small white sticker, showing the number 7, this is probably an indication of size.costume, male uniform, civilian, cap

Clothing. Pointed lapel collar, with underside of collar lined with felt. Two brass metal badges in a Leidertafel style - one on each side of collar. Cloth circular badges at the top of each sleeve are embroidered with a coat-of-arms, below which are two shields, one blue, and embroidered with a bunch of grapes, one red embroidered with a sheaf of wheat, a sheep, and perhaps a symbol of the landscape. Two breast pockets, rectangular with rounded lower corners and a shield shaped flap, closed with a 2 cm brass button impressed with a laurel wreath, and horn, suspended by a cord, and triple loop-a replica of British Light Infantry buttons. Two lower ''pockets'' are flaps only, giving the impression of a pocket only. Jacket lined with blue taffeta-like fabric-possibly polyester. One internal bound pocket inside right front. Four 2.5cm brass buttons (as on pockets) at centre front opening. All buttons have a metal back, and metal loop, which enables the buttons to be pinned to the garment, enabling removal for cleaning purposes.On inside breast pocket: A Quality Garment by Australian Government Clothing Factory. On back of buttons : Stokes Australia.costume, male ceremonial, marong municipal band blazer

Refers to the service of Lt. Colonel "Roy Shadforth" 38 Bn NVR.1. Jacket - Ceremonial dress, black woollen. Brass AMF buttons. Northern Victorian Regiment. Brass Badges on collars - Major's Rank Badge. 2. Trousers - black ceremonial with red strip. 3. Whistle, pea. with lanyard, leather. 4. Sam Browne belt, tan leather, brass fittings. 5. Hat, peaked, black with gold braid on brim, green band NVR badge. 6.& 7. Gloves, leather, brown, lined. 8. Scabbard sword. Tan leather, silver top.38 bn, post ww2., roy shadforth, passchendaele barracks trust

'Laurentino' red jacket, casual, with flap pockets & black buttons with brass colour stars pressed on. Sleeves have buttoned cuffs and jacket has a band at waist. Panels from jacket flaps down front .Style is denim jacket.'Laurentino'costume, female

World War 2 Worn by Noel WestWorld War 2 Australian War Graves UnitKhaki army woollen jacket with belt which has a metal buckle, rising sun badge on each lapel. Shoulder straps with three oxidised pips plus one button and Australia badge. Box pleated patch pocket with three pointed flap on each upper chest. Large expanding patch pockets with with straight flap below waist on each side. Four oxidised brass AMF buttons down front. British Forces Commonwealth badge on right hand sleeve. Back of jacket has vent from waist to lower edge. jacket is lined with cotton.K 21costume, male uniform, military

The Australian Military Forces buttons were worn by Australian troops in World Wars One and Two. The Australian Commonwealth buttons date from the Edwardian era (1901-1910)These buttons are examples of the buttons used by the Australian Army. The attachment to a card is also an interesting example of the way members of the Warrnambool and District Historical Society mounted and displayed collection items in the 1960's and 1970's.Seven brass circular military buttons pressed into a rectangular piece of cardboard with pasted on lined paper on the back of the cardboard. Three of the buttons feature a raised map of Australia, a crown and text. Five buttons feature a raised intertwined E R,V11, a crown and text Protruding through the paper at the back is a section of a ring. The cardboard side has hand drawn blue lines, an oval stamp with text and hand written text. Three buttons have AUSTRALIAN MILITARY FORCES. Five buttons have AUSTRALIAN COMMONWEALTH FORCES Military medallion buttons ( hand written) Stamp is oval shaped with faded text of which only HISTORICAL DISTRICT and SOCIETY can be deciphered Three blue hand drawn lines to position the buttons. army, australian military forces, buttons, world war two, world war one

Tin contains large quantity of RAF, RAAF badges of rank. Trade badges. Buttons, brass & dark. Belt buckles plain brass, British coat of arms, darkened. Stored in a biscuit tin, rectangular shaped with corners flattened to make an octagonal. The lid has a still life scene of 6 tomatoes & a blue patterned, gold topped jug. Sides have a wavy mesh appearance of two tone blue.Printed in small black letters on lid near bottom edge: “Persimmons”numismatics-badges-military, containers - domestic, metalcraft, raf, raaf

This Post Office Receiving Pillar was restored in 1980 and is now a fully operational Australia Post mailbox. In early August 1980 Prime Minister Mr. Fraser posted Warrnambool’s first commemorative envelope into this restored Post Office Receiving Pillar at Flagstaff Hill Maritime Village. The special limited edition envelopes are numbered 1 – 7000. When posted, the envelopes would have the Flagstaff Hill Logo and Flagstaff Hill Maritime Village’s own postmark of a ship’s steering wheel surrounding a lighthouse and a sailing ship, and were dated August 3 on the First Day Cover. Amongst Flagstaff Hill’s collection is that very first letter posted by Prime Minister Fraser. HISTORY OF POST OFFICE RECEIVING PILLARS In 1851 ‘pillar boxes’ were installed at roadside locations in the island of Jersey, England; they had already been successful in several European countries. The use of new prepaid, adhesive postage stamps as well as the roadside pillar boxes meant there was no need for the public to take a trip to the Post Office just to post a letter. By 1855 London had installed its first six Pillar Boxes. In 1856 the pillar boxes were first introduced in Sydney. These were circular with a crown on the dome, supported by leaves. Early Victoria Mail was originally collected by ‘letter carriers’, first appointed in Melbourne in 1841, equipped with leather bag and hand bell. He wore a red coat with brass buttons and a black top hat! In 1844 two wooden receiving boxes were erected in Melbourne. The first cast iron boxes were installed in South Melbourne (Emerald Hill) and were still in service until 1967. They were a fluted circular design and made in England. In the early 1860’s the ‘low door round’ design posting box was introduced, being circular and surrounded by a crown, with two broad embossed bands around its circumference. The clearance door was in front of the box and low down. These were made in Australia. In the early 1870’s square boxes with a tapering top were being used. These too were made in Australia by different manufacturers with slight variations on style such as the orientation and number of slots. Next came the circular boxes again, similar to the ‘low door round’ but with the clearance door extending to just below the posting slot, often referred to as ‘high door round’. These boxes did not have embossed bands. In 1887 small cast iron boxes were introduced, attached to posts and poles and called ‘lamp post receivers’. Around 1930 a ‘London’ model was used in Victoria. It was copied from the flat-domed type in London but made in Tasmania. [References: Flagstaff Hill Maritime Village records, The Warrnambool Standard, August 1st, 1980, “Stamps.Au” http://www.stampsau.com, 4th April 2011 (Extracted from “Australian Street Posting Boxes” by Ken Sparks – out of print)] Post Office Receiving Pillar, or letterbox.1885 “High Door Round” design. Tall cast iron cylinder with decorative dome cap with crown on top. Side has a slot and a hinged door with handle shaped as a fist. Painted red with gold trim. “POST OFFICE / RECEIVING PILLAR” lettering cast into cylinder. Restored in 1980 and once again operating as an Australia Post mailbox. Commemorative plague on pillar.“POST OFFICE / RECEIVING PILLAR” lettering cast into cylinder. Flagstaff Hill Maritime Museum – Port of Warrnambool. This letter receiver was officially commissioned on 3rd August 1980 by the Prime Minister of Australia, the Right Honourable Malcolm Fraser M.P. on completion of 25 years’ service as the Federal Minister for Wannon.”flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, post office receiving pillar, letterbox, mailbox, australia post

Refers to the service of Lt.Col. "Roy Shadforth".1. Red waist jacket, white collars and white cuffs. 38 BN. R.V.R. Badge (Gold) on collars. Epaulettes show gold Lt.Col. badges and gold A.M.F. buttons. It has one interior pocket. 2. Red sleeveless vest. 4 brass (Gold) buttons, AMF motif, lined with a faint light cotton. 2 exterior pockets. 3. Shirt, short sleeved - off white. polyester cotton, 6 clear buttons, one breast pocket. 4. Black bow tie with plastic mount. 5. Trousers, woollen, black. Red pin stripe on outside legs. Lined with same cotton as vest. Straps at bottom of legs to hook up under feet.1. Written inside one arm pit is “Shadforth” 2. Written inside vest is “Shadforth” 5. Written on trouser pocket is “Shadforth”post ww2, cmf, uniform, roy shadforth, passchendaele barracks trust

Post Office Receiving Pillar was Collected from Warrnambool City Council’s Scott Street Depot and transported to Flagstaff Hill, stored in the Barracks area Friends of Flagstaff Hill began the project of restoring the Post Office Receiving Pillar in early 2011. The replacement dome required a pattern to be made from paper, then timber, then someone to manufacture it. The cast iron body required sand blasting and undercoating. The pillar was installed in Flagstaff Hill Maritime Village in March 2014. A specialist visited the Village and painted the pillar with 7 coats of ‘post office red’ then completed the job with gold paint on the details. In 2015 an information plate of brass was fitted to the Pillar in the position that would have originally announced the clearing times. It was originally manufactured by G Couch, Engineer, Alliance Iron Works, Melbourne. Gordon Couch passed away in June 1896 and his Works were offered for auction in November 1897. HISTORY OF POST OFFICE RECEIVING PILLARS In 1851 ‘pillar boxes’ were installed at roadside locations in the island of Jersey, England; they had already been successful in several European countries. The use of new prepaid, adhesive postage stamps as well as the roadside pillar boxes meant there was no need for the public to take a trip to the Post Office just to post a letter. By 1855 London had installed its first six Pillar Boxes. In 1856 the pillar boxes were first introduced in Sydney. These were circular with a crown on the dome, supported by leaves. Early Victoria Mail was originally collected by ‘letter carriers’, first appointed in Melbourne in 1841, equipped with leather bag and hand bell. He wore a red coat with brass buttons and a black top hat! In 1844 two wooden receiving boxes were erected in Melbourne. The first cast iron boxes were installed in South Melbourne (Emerald Hill) and were still in service until 1967. They were a fluted circular design and made in England. In the early 1860’s the ‘low door round’ design posting box was introduced, being circular and surrounded by a crown, with two broad embossed bands around its circumference. The clearance door was in front of the box and low down. These were made in Australia. In the early 1870’s square boxes with a tapering top were being used. These too were made in Australia by different manufacturers with slight variations on style such as the orientation and number of slots. Next came the circular boxes again, similar to the ‘low door round’ but with the clearance door extending to just below the posting slot, often referred to as ‘high door round’. These boxes did not have embossed bands. In 1887 small cast iron boxes were introduced, attached to posts and poles and called ‘lamp post receivers’. Around 1930 a ‘London’ model was used in Victoria. It was copied from the flat-domed type in London but made in Tasmania. … [References: Flagstaff Hill Maritime Village records, The Argus, 11th April, 1890, The Argus, 2nd July, 1896, The Argus, 30th Nov. 1897, “Stamps.Au” http://www.stampsau.com, 4th April 2011 (Extracted from “Australian Street Posting Boxes” by Ken Sparks – out of print)] Post Office Receiving Pillar, or letterbox.1885 "High Door Round" design, restored 2014 Tall cast iron sylinder with decorative dome cap, slot in side, hinged door with handle shaped as a fist. Painted red with gold trip..Reconditioned barrel, reconstructed dome. Restored by Friends of Flagstaff Hill, 2014. Now a working letterbox. Made in Melbourne.Oval maker's plate “ - G. COUCH - / ENGINEER / ALLIANCE IRON / WORKS / MELBOURNE”flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, post office receiving pillar, letterbox, mailbox, australia post

Set of four nickel silver MMTB Coat buttons with brass backs and a sewing lug or ring on the rear. All of the items are made by Buttons of Birmingham - name stamped into the rear section. Two large - 22mm diameter and two 15mm dia. Received in a small envelope with information that they were issued by the Interim Tramway Board. The design appears to be similar or identical to that of the MMTBIn a small manila envelope "2 large and 2 small buttons issued by the (interim) Tramways Board on their uniforms of its cable tram crews"trams, tramways, melbourne tramways, uniforms, buttons, tramway board, cable trams

The nurse uniform is worn for hygiene and identification. The traditional nurse uniform consists of a dress, apron and cap and although there have been variants, the basic style has remained recognizable. Blue and white hounds tooth fabric dress with front opening tab containing 5 (white fabric over metal) buttons. The dress has a pocket over the left breast and a Maltese cross patch is sewn on the left sleeve . There is a starched, white removable collar, cuffs, belt and apron. The cuffs and belt have 5 out of six removable buttons with brass split pins. "Bronwyn Griffith" name tag sewn on to collar as well as F839 written in pen. E213, D.L. Ross, E.37 written in pen on belt. E877 written in pen on dress. G.N. Barton name tag and J.Williams, E.507 written in pen on one cuff. L. Susan Draper name tag and E.822 written in pen on the other cuff. E213, D.L. Roo?, E.37 written in pen on apron.nurse uniform, nurse cap, nurse collar, nurse apron

Set of eight small silver MMTB Coat buttons with brass backs and hooks. Five of the buttons (approx. 16mm dia) are made by Stokes and Sons Melbourne and three by Buttons of Birmingham UK One of the button has a metal clip in the rear. Four large, one brass finished and three nickel silver buttons, 23mm dia. with brass backs and hooks. Two by Stokes and Sons and two by Buttons of Birmingham.trams, tramways, melbourne tramways, uniforms, buttons, mmtb

Clothing. Navy blue wool (or polyester?) fabric. Pointed lapel collar, lined on the underside with felt. Two brass Leidertafel style badges-one either side of collar. Two rectangular shield-shaped breast pockets have rounded lower corners, and a shield-shaped flap closure, fastened with a 1.8 cm brass like plastic button. All buttons have an impressed laural wreath and horn, (suspended by a three looped cord) - a replica of British Light Infantry buttons. Three brass like plastic buttons at centre front (4th one is missing). All buttons are pinned onto the garment to enable easy removable for cleaning. Two inside breast pockets. Fully lined with blue taffeta-like fabric. On each upper sleeve, at shoulder level there is an 8 cm diameter circular cloth badge, embroidered in blue, red, and gold, displaying a Coat-of- Arms, and two shields - one blue embroidered with a bunch of grapes, and one red, embroidered with a sheaf of wheat and a sheep. These are probably symbols of the rural aspect of the town of Marong. Two lower ''pocket flaps'' are decorative, but not real pockets.Back of buttons: STOKES AUSTRALIA. On inside breast pocket: Embroidered label featuring Australian Coat-of Arms, and Quality Garment by Australian Government Clothing Factory.costume, male ceremonial, marong municipal band blazer

Jacket - RAN winter ceremonial uniform Officers. Dark Navy Blue colour wool fabric, double breasted with six buttons, collar, sleeves with two buttons near cuff. One inset breast pocket and two inset pockets with flap. Buttons - tarnished brass metal with shank and raised emblem, Kings crown, anchor, lettering - "AUSTRALIA". Black colour cotton fabric lining, white collar. White colour fabric manufacturers label - back inside collar.Manufacturers information - red ink print "M.TX/SIZE S".uniforms, ran

Set of four types of coat buttons: 1 - MMTB button or Badge - brass - made by Buttons of Birmingham UK - approx. 25mm dia. 2 - MT - (Cable tram) button - brass - made by Stokes and Sons Melbourne - approx. 25mm dia. (this is to be clarified as at 24/6/2018, though see detailed image of a conductor in uniform - Reg Item 1961.) 3 - Dept of Govt Transport - Tasmania? - has a crown in the centre, - nickel silver with brass back and formed loop to sew onto a jacket or be pinned. 4 - Two badges both with the Islamic symbol and star (5 points) - brass, one marked "Tramways" and the other "Tramways Caire" - Cairo. The first badge made by "A. Meyer & Co. Wien".trams, tramways, melbourne tramways, uniforms, buttons, cairo, tasmania, cable trams