Showing 132 items
matching commemorative item
-
Melbourne Legacy
Sculpture - Sculpture, ceramic, Ceramic Innovations Pty Ltd, RAAFie
A sculpture of an Australian air force man that was produced as a commemorative piece by a Melbourne firm called Ceramic Innovations. It is filled with Tawny Port and is part of a wider set of bar pieces. The three pieces held at Melbourne Legacy are tributes to the three armed forces and are called 'Digger', 'RAAFie' and 'Jack Tar'. They were once in the comradeship room and now stored in the archive. An advertising flyer for 'Digger' shows the RRP was $110 with $5 of each 'Digger' being donated to Legacy Australia.A record that the items were souvenirs as tributes to the three armed forces.Ceramic sculpture of the head of a airforce person that is made as a bottle, with a separate hat, and contains Tawny PortGold inscription under the hat says 'Bullocks Tawny Port. Bar Piece No 14. Produced by Ceramic Innovations Pty Ltd.'souvenir, bottle, sculpture -
City of Greater Bendigo - Civic Collection
Ceramic - Painted souvenir plates, Bendigo Pottery, 2010
Established by George Guthrie in 1857 (about 5km north of its current site) and then again seven years later in 1864 after it initially closed, Bendigo Pottery remains one of the most influential and longest running Pottery’s in Australia. Over the years the Pottery has contributed to the growth and development of the district through both its products including building products, table ware and decorative and commemorative war as well as artistically, being responsible for training and supporting many potters locally. The City of Greater Bendigo has had a long history of partnering with Bendigo Pottery to produce tourism tableware and the Civic Collection holds a number of important items within its collection.Two plates produced by Bendigo Pottery with hand painted designs depicting iconic Bendigo landmarks. 0408.1 Front: FCC-A JU HUI (To get together) / Bendigo 2010. Verso: Stamped Bendigo Pottery Est 1858 / Australia, signed FB (Faye Brady). 0408.2 Front: Bendigo / Australia. Verso: Stamped Bendigo pottery Est 1858city of greater bendigo tourism, bendigo pottery, faye brady artist -
City of Greater Bendigo - Civic Collection
Ceramic - Bendigo Pottery :: Australian Prime Minister Flask, Bendigo Pottery, Sir Edmund Barton, c 1975
Established by George Guthrie in 1857 (about 5km north of its current site) and then again seven years later in 1864 after it initially closed, Bendigo Pottery remains one of the most influential and longest running Pottery’s in Australia. Over the years the Pottery has contributed to the growth and development of the district through both its products including building products, table ware and decorative and commemorative war as well as artistically, being responsible for training and supporting many potters locally. The City of Greater Bendigo has had a long history of partnering with Bendigo Pottery and the Civic Collection holds a number of important items within its collection. This Sir Edmund Barton 'reform' flask was one of a limited edition character bottles produced by the Pottery to commemorate his contribution to Australian politics. Edmund Barton became Australia’s first Prime Minister on New Year’s Day 1901, at a huge public ceremony in Centennial Park in Sydney. Reform flasks were English salt-glazed stoneware flasks produced in the early 19th century shaped into the form of figures connected with the Reform Bill of 1832. Much was made of puns like ‘the spirit of reform’ at the time. Artist John Frith has taken the reform flask form as inspiration for a series of political ceramics of some Australian Prime Ministers. The series includes Edmund Barton, Alfred Deakin and Chris Watson. Glazed ceramic flask in the shape of Sir Edmund Barton. Square shaped with most of the detail on the front facing side other than head which is more detailed. Cork still in place in top of head.On reverse of flask; Sir Edmund / Barton / Prime Minister / of Australia / 1901 to 1908 Bendigo Pottery / LMTED / Edition Series / 110/1200 /Australia Signed lower centre; 'Frith'australian politics, bendigo pottery -
Melbourne Tram Museum
Document - Photo Album, Graeme Breydon, "Tickets and Postal Covers", c1970 to 1990
Photo Album - dark blue plastic covers with the letters "photo album" in raised letters, stippled finish containing 10 leaves ring bound with an adhesive surface with clear plastic sheet on each cover. Page 1 – set of 8 Last day tram tickets – 16/4/1972 and four SEC tickets rear. Page 2 – set of 10 SEC tickets and 2 backs Page 3 – 2 BTPS 10c tickets, MMTB 25c, 3 Brisbane City Council tickets, two Trittons furnishings, one WCC (Wellington?) cable car and two MMTB City Concession tickets Page 4 – Set of 9 MMTB tickets 4d, 7d city, 7d, 8d, 1/-, 1/ 4, 2/- or 20c, 2/6 and one Pensioner’s check ticket. Page 5 – Set of 9 MMTB tickets, 4c, 8c, 9c, 10c, 30c, Pensioner’s concession, two $1 City concession cards, city concession check ticket and two machine issued tickets 1c and 15c. Page 6 – set of 16 MMTB tickets that have been recovered from within trams, very dirty, check tickets, value tickets and advertising on the rear. Page 7 – various special train tickets – Stainless steel train, ARHS tours, TMSV, ARHS Farewell, ARHS SA Mile End, Ballarat trams x 2, Crich exhibition ticket and one MTT (Tas?) 30c. Page 8 – VR Windsor to Melbourne Quarterly 1940, 7 VR various country and suburban tickets and two VR Motor coach services tickets. Page 9 – two interstate reserved seat tickets, Brisbane suburban ticket and 8 various values QR Parcel tickets – very dirty. Page 10 – Two Puffing Billy guest passes, 10th anniversary ticket, 10 various card tickets for Puffing Billy and tours. Page 11 – 6 + others MTT Adelaide value tickets with adverts on rear and four AETM St Kilda Museum tickets. Page 12 – four Red Bus Rover London tickets, four Peak Tramways tickets, one toll bridge, 6 London machine issued tickets. Page 13 – One San Francisco Municipal Railway ticket, one LlafrairPG platform ticket and two MMTB Machine tickets. Page 14 – One $1 MMTB city concession card and one Parramatta Park tramway ticket issued for COTMA during 1976. Page 15 – One Emerald Park vehicle entry ticket and one PBPS opening day of the extension to Lakeside in 1975 with certificate. Page 16 – One PBPS Notice. Page 17 – not used. Page 18 – three commemorative envelopes – WA Railway Centenary, Standard Gauge to Melbourne, and Sydney to Perth. Page 19 – Brisbane tramways last day, two Last day envelopes for Ballarat and Bendigo. Page 20 – three different St Kilda Centenary – Adelaide. Contained within the album was loose tickets - see Reg Item 3970 and a pamphlet for the opening of the Transport Mural at Spencer St Station on 30 Jan. 1978.has a label on the side in punched letters on a green tape "Tickets and Postal Covers"trams, tramways, tickets, secv, mmtb, adelaide, brisbane, arhs, aetm, aeta, pbps, cotma, tmsv, victorian railways, vr, post office, envelopes, post office -
Melbourne Tram Museum
Postcard, Nu-color-Vue, 1041 and Cable Tram set No. 1, c1974
Colour postcard with serrated edges of 1041 and Cable Tram set No. 1 outside a building at Preston Workshops, c1974. Produced by Nucolorvue Productions for the TMSV, NCV1095. Has details of the photograph on the rear, TMSV Logo, Publisher details and Printed in Australia. Photograph by David Menzies. Two copies held See Also Reg Items 120, 1036 and 3320 72.1 - 2nd copy of postcard - on rear - Has 33 cent stamp, postmarked for the Centenary of Cable Car Services, 11/11/1985 with a grip included and stamped "100 years of Melbourne trams carried on Commemorative official trip from Flinders St, Melbourne to Richmond Town Hall, November 11, 1985" in blue ink in the bottom right hand corner. See Reg Item 5784 for a colour slide.trams, tramways, cable trams, prototype tramcar, mmtb, preston workshops, centenary, stamps, tram 1041, tram 1 -
City of Greater Bendigo - Civic Collection
Domestic object - Water Monkey, Bendigo Pottery, 1880 - 1910
Vessels for storing water such as these are common throughout the ages and evident in the pottery of the middle east, Mediterranean and Africa. Between 1880 and 1910 Bendigo Pottery produced these as part of their terracotta ware range. Established by George Guthrie in 1857 (about 5km north of its current site) and then again seven years later in 1864 after it initially closed, Bendigo Pottery remains one of the most influential and longest running Pottery’s in Australia. Over the years the Pottery has contributed to the growth and development of the district through both its products including building products, table ware and decorative and commemorative war as well as artistically, being responsible for training and supporting many potters locally. The City of Greater Bendigo has had a long history of partnering with Bendigo Pottery to produce tourism tableware and art pieces and the Civic Collection holds a number of important items within its collection.Polished terracotta water holder with saucer and stopper. Globular body with rounded base. The shoulders taper into long cylindrical neck, no handle or pouring spout. Surface is undecorated expect for two rings at base of neck. This is the smaller of the two. 0430a stopper; 0430b vessel; 0430c saucerNone foundbendigo pottery, george gutherie, city of greater bendigo tourism -
City of Greater Bendigo - Civic Collection
Domestic object - Water Monkey
Vessels for storing water such as these are common throughout the ages and evident in the pottery of the middle east, Mediterranean and Africa. Between 1880 and 1910 Bendigo Pottery produced these as part of their terracotta ware range. Established by George Guthrie in 1857 (about 5km north of its current site) and then again seven years later in 1864 after it initially closed, Bendigo Pottery remains one of the most influential and longest running pottery’s in Australia. Over the years the Pottery has contributed to the growth and development of the district through both its products including building products, table ware and decorative and commemorative ware, as well as artistically, being responsible for training and supporting many local potters. The City of Greater Bendigo has had a long history of partnering with Bendigo Pottery to produce tourism tableware and art pieces and the Civic Collection holds a number of important items within its collection.Polished terracotta water holder with saucer and stopper. Globular body with rounded base. The shoulders taper into long cylindrical neck, no handle or pouring spout. Surface is undecorated except for two rings at base of neck. This is the larger of the two. 0431a stopper; 0431b vessel; 0431c saucerNone foundbendigo pottery, city of greater bendigo tourism, george guthrie -
City of Greater Bendigo - Civic Collection
Ceramic - Bendigo Pottery :: Australian Prime Minister Flask, Bendigo Pottery, John C Watson, c 1975
Established by George Guthrie in 1857 (about 5km north of its current site) and then again seven years later in 1864 after it initially closed, Bendigo Pottery remains one of the most influential and longest running Pottery’s in Australia. Over the years the Pottery has contributed to the growth and development of the district through both its products including building products, table ware and decorative and commemorative war as well as artistically, being responsible for training and supporting many potters locally. The City of Greater Bendigo has had a long history of partnering with Bendigo Pottery and the Civic Collection holds a number of important items within its collection. This John C Watson (Chris Watson) 'reform' flask was one of a limited edition character bottles produced by the Pottery to commemorate important figures in Australian politics. He was the first Labour Prime Minister elected forming a minority government in April 1904, aged 37, after the ALP withdrew its support from Deakin. He was one of the first socialists to head a government in a parliamentary system, attracting international attention, and remains Australia's youngest prime minister. After less than four months in office, the Watson government lost a confidence motion and Watson was succeeded as prime minister by anti-socialist George Reid. The original reform flasks were English salt-glazed stoneware flasks produced in the early 19th century shaped into the form of figures connected with the Reform Bill of 1832. Much was made of puns like ‘the spirit of reform’ at the time. Artist John Frith has taken the reform flask form as inspiration for a series of political ceramics of some Australian Prime Ministers. The series included Edmund Barton, Alfred Deakin and Watson.Glazed ceramic flask in the shape John Watson. Square shaped with most of the detail on the front facing side other than head which is more detailed. Cork still in place in top of head.On reverse of flask; John C Watson / Prime Minister / of Australia / 27.4.1904 / To / 18 .08. 1904 Bendigo Pottery / LMTED / Edition Series / 55/1200 /Australia Signed lower centre; 'Frith'australian politics, bendigo pottery -
City of Greater Bendigo - Civic Collection
Ceramic - Bendigo Pottery :: Australian Prime Minister Flask, Bendigo Pottery, Alfred Deakin, c 1975
Established by George Guthrie in 1857 (about 5km north of its current site) and then again seven years later in 1864 after it initially closed, Bendigo Pottery remains one of the most influential and longest running Pottery’s in Australia. Over the years the Pottery has contributed to the growth and development of the district through both its products including building products, table ware and decorative and commemorative war as well as artistically, being responsible for training and supporting many potters locally. The City of Greater Bendigo has had a long history of partnering with Bendigo Pottery and the Civic Collection holds a number of important items within its collection. This Alfred Deakin 'reform' flask was one of a limited edition character bottles produced by the Pottery to commemorate important figures in Australian politics. The original reform flasks were English salt-glazed stoneware flasks produced in the early 19th century shaped into the form of figures connected with the Reform Bill of 1832. Much was made of puns like ‘the spirit of reform’ at the time. Artist John Frith has taken the reform flask form as inspiration for a series of political ceramics of some Australian Prime Ministers. The series includes Edmund Barton, Alfred Deakin and Chris Watson.Glazed ceramic flask in the shape Alfred Deakin. Square shaped with most of the detail on the front facing side other than head which is more detailed. Cork still in place in top of head.On reverse of flask; Alfred Deakin / Prime Minister / of Australia / 1903 - 1904 / 1905 - 1908 / 1909 - 1910 Bendigo Pottery / LMTED / Edition Series / 101/200 /Australia Signed lower left; 'Frith'australian politics, bendigo pottery -
National Vietnam Veterans Museum (NVVM)
Plaque
This item commemorates the war in Vietnam (1962-1972)Glass commemorative plaque with metal dedication to the AATTVThe Vietnamese Veterans Association of Victoria Inc In commemoration of the 50th Anniversary of Australian Military commitment in the Vietnam War respectfully and gratefully presents this momento to all Australians who served in the Australian Army Training Team Vietnam during the Vietnam War especially those who paid the supreme sacrificevietnamese veterans, aattv, 50th anniversary commitment -
Warrnambool and District Historical Society Inc.
Medal - Bicentennial Commemorative Medallion, Royal Australian Mint, Canberra, 1988
This medallion was produced at the Royal Australia Mint in Canberra in 1988 to commemorate the Bicentenary of European settlement in Australia. The obverse design was by Michael Meszaros and the Bicentenary logo was designed by Michael Tracy. This medallion was given to Elizabeth Douglas in 1988 in recognition of her work as Secretary of the Shire of Hampden Bicentennial Community Committee. At the time Miss Douglas was Principal of Derrinallum High School, a position she held from 1984 to 1991. In retirement Elizabeth O'Callaghan (nee Douglas) spent many years as an active member of the Warrnambool and District Historical SocietyThis item is of historic interest as an example of a Bicentennial medal awarded to a local individualThis is a medallion of circular shape and bronze colouring (gold-plated). On the obverse side it has a raised gold pattern representing masses of people with a flag and gold lettering. On the reverse side it has a stylised map of Australia with gold lettering and sprays of flowers. The medal rests on a round plastic container inserted into a rectangular green box with felt trimming. The box is contained in another green cardboard box Australian Bicentenary 1788-1988 Celebration of a Nation Australia 1788-1988 The Official Bicentenary Commemorative Medallionaustralian bicentenary, bicentennial medallion, elizabeth douglas derrinallum -
Warrnambool and District Historical Society Inc.
Souvenir - Loch Ard Commemoration Souvenir, 1978
This object has been made in 1978 to commemorate the 100th anniversary of the sinking of the ship 'Loch Ard'. This ship was wrecked on Mutton Bird Island near Port Campbell, Victoria in June 1878 with the loss of 52 lives and with two survivors. The story of the two survivors, passenger Eva Carmichael and seaman Tom Pearce has become part of the local folklore and has been retold in poetry, stage and T.V. drama and prose works. and is the subject of one of the night laser shows at Flagstaff Hill Maritime Museum in Warrnambool. Port Campbell Information Centre and Flagstaff Hill Maritime Museum also house many significant shipwreck items from the 'Loch Ard' including the nationally-important Loch Ard Minton Peacock. One of the commemorative events that took place in 1978 was the raising of the anchor from the wreck and its display at Port Campbell. This anchor item was probably made at the time and given to one of those connected to the recovery of the anchor. This souvenir is of interest as an object made to commemorate the most significant shipwreck in Western VictoriaThis is a souvenir of a shipwreck. It has a rectangular-shaped wooden base with a wooden piece with one curved edge standing upright at a slight angle on the top of the base. The wooden piece has four metal strips and has a metal anchor slotted into it so that the anchor is raised from the base. The wooden piece and the end of the anchor are glued to the base. The base has a silver-coloured metal name piece. The wooden sections have been slightly varnished. On the bottom of the base there are four rubber pads at each corner. Loch Ard Commemoration 1978loch ard wreck, loch ard commemoration 1978, flagstaff hill maritime museum, port campbell information centre, tom pearce & eva carmichael