Pages from a scrapbook belonging to Heather Jenkins (nee Cone) who lived as a child in the Police Residence at 728 Main Road, Eltham from 1911 till the early 1920s.Heather McKnight Jenkins (nee Cone) was born 1911, possibly at the Eltham Police Residence and spent her childhood growing up in the Police Residence. Heather was the daughter of John Thomas Cone, Police Constable, and Charlotte Helena Cone (nee Black) who had married in 1906. Constable Cone was transferred to Eltham Police Station from Lauriston (near Kyneton) in May 1911. He retired from the force around September 1922 most likely as a result of significant health concerns experienced earlier that year from 22 April when he was hospitalised. He died 5 October 1922 at Maria Street at age 60 leaving behind a widow and two daughters; his son having pre-deceased him as a result of effects of the war. He is buried in Melbourne General Cemetery . In his probate it states that he owned a piece of land 200 links frontage to Maria Street and a depth of 241 links. It is believed that this is the land opposite the Police Station which Heather Jenkins referred to as being owned by her father and where he agisted the Police horses. Heather, her sister and mother Charlotte remained in Eltham until at least the 1924 Electoral Roll where Charlotte was listed as Home Duties however by 1925 she was listed at 229 Glenferrie Road, Malvern, occupation, Registrar of Births. In the 1934 (and 1936) Electoral Roll, Heather was a Clerk and her mother Charlotte was the Registrar of Births. in 1952 following her mother’s death she made application for Grant of Probate. Heather remains listed in the 1954 Electoral Roll at 13 Ashburton Road under her maiden name Cone however by the 1963 Electoral Roll she is listed at the same address as Heather McKnight Jenkins long with James Gardiner Jenkins. Neither appear listed in the 1958 Electoral Roll. James Gardiner Jenkins (1892-1975) first wife was Fanny Davison Carrucan (1899-1929), daughter of Denis Carrucan and Jane (nee McAleese). They married in 1925. Fanny died 11 November 1929. In the 1934 Electoral Roll he remained listed at John Street, Eltham, Railway Employee however by 1935 Electoral Roll, James Gardiner Jenkins, Railway Employee, was listed at 229 Glenferrie Road, Malvern and he remained living with Charlotte and Heather Cone when they moved to 13 Ashburton Road, Glen Iris. One of Constable Cone’s first investigations upon arriving in Eltham was the accidental fatal shooting in the head with a pea rifle by young Francis August Capewell, aged 11, of John Sutcliffe Deegan, 14, in Maria Street near the Railway. Constable Cone’s replacement was Constable William Charles Sargeant who commenced in charge of the Eltham Police Station from Thursday, 10 August 1922. Constable William Charles Sargeant, and his wife Elizabeth Agnes Sargeant were based at the Eltham Police Station until his transfer to the Police Station in Burwood Road, Hawthorn. He retired at Hawthorn Police Station in 1931, described by Hawthorn Council in 1927 as in a disgraceful condition and unfit for human habitation (Kathryn Griffin family tree – Ancestry) whereupon they moved to 28 Saunders Street, Coburg. Elizabeth died 16 July 1936 in Fitzroy. William then moved to 6 Queen Street Coburg in 1936 and then 1 Queen Street in 1942 where he died 7 August 1944. He is buried at Fawkner Cemetery. Brown paper scrapbook page (torn from scrapbook) with 8 black and white/sepia photos of varying sizes, 1 newspaper clipping and one greeting card with printed sketch and handwritten captions in ink. On back of page is 1 black and white photo and a large newspaper clipping.eltham, police residence, walter withers, heather mcknight jenkins (nee cone), constable john thomas cone, charlotte helena cone (nee black)

This insulator was used on phone wires. Insulators were originally designed to keep the wires linking telegraphs and telephones insulated from the wooden poles that held them aloft. Prior to 1925, Australia relied solely on insulators imported from other countries. Glass insulators were first manufactured in Australia in c. 1926 by Australian Glass Manufacturers. Their factory was, and still is, located on South Dowling Road in Sydney. Australian Glass Manufacturers (A.G.M.) had developed a toughened type of glass very similar to Pyrex glass. Since the Pyrex name could not be used due to trademark infringements, they called their glass AGEE for Australian Glass. Many fruit jars, insulators, pie dishes and other glass items were manufactured with this AGEE trademark during the 1926 to 1940 period.Glass insulators are rapidly becoming a thing of the past in Australia with open-wire communication lines rarely existing near metropolitan areas. The remaining open wire lines are being abandoned and dismantled everywhere with very few insulators being saved as interest in them in Australia is quite limited. (ref Australian Insulators web-site). This item is an example of a piece of equipment which has been superceded.A glass telegraph line insulator of double umbrella shape. Glass is coloured purple - AGEE 30 Insulator. It is a tapered cone of thick glass. The inside top is threaded for screwing onto the metal piece on a wooden cross bar.Embossed on outside of bell: "AGEE 30"insulator-glass agee a.g.m. communications telegraphy

Black Saturday explosion by rocket mines in Sth Vietnam. Vung Tau and Nui Dat hospitals involved in helping the wounded soldiers. Australian and US helicopters in action. 8 RAR and 6RAR involved.A sepia coloured newspaper article from the Herald, dated March 2 1970, has an image of 13 local Vietnamese people working in paddy fields with five rifles nearby stacked up forming a cone shape. Herald Sun March 2nd 1970/ Guns at harvest/ Battle to save hurt diggers. guns, harvest, mine explosion, black saturday, long hai mountains, helicopter evacuation, 11 dead, 29 wounded, jumping mines, 8rar & 6rar

Sergeant Keith McDowell gave a cone he collected from Gallipoli to his aunt to try and grow. One seed was planted in the Warrnambool Botanic Gardens and another at the Shrine of Remembrance in Melbourne. These pine trees have symbolic importance as a representation of Australian soldiers' "tenacity and fortitude". They are an important link to the remembrance of those men and women from Ballarat who saw action in World War 1.3 pages (pp.44-46). p.44 in black print on white paper, a photograph of the planting of one of the pines in 1934 at the Australian War Memorial, Canberra. p.45 is a coloured picture of the pine in Canberra. p46 has a history of the seeds brought from Gallipoli by Smith and Mcdowell on the right-hand side of the page and a photograph of the Pines being labelled. There is a column about these trees down the left-hand side of the page.None john garner, doctor, john garner collection, ballarat botanical gardens, friends of the ballarat botanical gardens, the lone pine, gallipoli, anzacs, sergeant keith mcdowell, lance corporal benjamin smith, aleppo pine, turkish pine, pinus halepensis, pinus brutia, gardens, ballarat

In approx 1971 Legacy distributed pine trees grown from seeds of a pine cone from Gallipoli, this brochure lists the towns that received the seedlings. It includes "The Story of the ANZACS" and "The Legacy Lone Pine Project". A record of a type of work done by Legatees to keep the memory of Gallipoli and fallen comrades alive.Single page printed brochure folded in three.legacy promotion, lone pine

By referring to Cat No 7237.2 this will bring up all items associated with Thompsons.This is a photocopy of an original of Arms Manufacturing machine. The machine is large. It appears to have 4 cone shafts that are adjustable. In the center is a shaft that looks like a cannon barrel. The whole assembly is on a heavy steel bed. The machine is inside a large iron shed.cannon manufacture, arms, print

Thurible located in the Anglican chapel of St Peter of the Mission to Seafarers.This is one of the many objects used for religious services in the chapel of the Mission.Cone shaped brass incense burner with relief religious motif of madonna and child and cut-out cross-shaped holes, suspended from chains at three points from the top rim. Suspended by rings underneath is swinging brass cross.religious objects, incense burner, religious icons, thurible, mission to seafarers, st peter chapel, sanctuary lamp

The wooden items are made from Banksia Bauerii. During the 1960's to the 1990's, local women made wooden items and jewellery of pressed flowers for sale at the Wildflower Show.The photo shows stuffed animals displayed on a sawn branch and leafed twigs. Items made from wood and Banksia cones can be seen in the top, left hand corner, and other small items can be seen hanging on a branch on the right.events, wildflower show

8485.1 - Painted black truncated cone, the base being wider than the top with the narrow pipe extending from the top. The handle is a curve of wide metal strip, also with a tube extending from the top. The top and bottom are slightly domed.

Used by donor's mother (1926 - 2015) who lived in Camberwell and Box Hill from the 1950's1 pair cone suede heeled shoes size 3. Right shoe has a rectangle metal cream buckle. Left shoe has buckle missing Leather sole and heel with leather and cotton lining Above buckle is a pointed feature3 sizecostume, female footwear

Square cardboard box with a coloured illustrated lid with 'Tala' / Icing Set / How to Ice a cake. On one side of the box - 12 icing tubes in this set; Tala Icing set containing syringe, 12 tubes, turn table, icing book no. 1730, copyright design made in England. On the other 2 sides (opposite to each other.) Let all your kitchen ware be Tala - illustrated. Turning table is tin. 200mm outer stand, circle turntable 140 mm. Book: 'How to decorate a cake booklet' - 130 mm long x 195 mm wide and 5 mm thick; Pink plastic tray indented to hold metal cones 12 cones tubes each with different opening at the point. Icing syringe (nickel silver with brass collars). Plastic icing cone, Tala ware, Made in England 320 mm long, circumference 30 mm at point x 210 mm wideSee description.cooking, baking, icing, cakes, domestic, decorating

Hand operated washing machine - plunger type - a central cone plunger attached to a fulcrum point (adjustable in height) on side with a long arm. Depth of plunger action also adjustable. All mounted on a three leg frame. Container is slightly coned shaped at bottom and has a drain tap at bottom for emptying water. Container can also be lifted off. Provision made for attachment of a wringer (this could be a later modification). Plunger is approx 37cm in diameter and has four 1.5cm holes for water to be forced through. Unit is galvanised steel but frame appears to have been painted with 'Silverfros'.On Side of container - 'The Zwar' VACUUM Washing Machine Patent No 2089/31domestic items, laundering

Ammunition shell was used in a 40 lb Armstrong Rifled Breach Loading (RBL) Gun. The shell was fired into Westernport Bay by the Hastings Battery Field Artillery in late 1800’s or early 1900’s. It was recovered by divers in recent times. It does not contain explosives because the projectile and explosive were separate items. The Armstrong 40 lb BL Gun There were 4 x 40lb Armstrong (RBL) Guns issued to the Ham and Beef Battery at Hastings Victoria. After the Hastings Battery field artillery disbanded, the 4 Guns were transferred from the Hastings Battery to the Warrnambool Battery field artillery in 1904. (There is a photograph of one of these guns on its carriage, pictured in front of the Orderly room (Drill Hall) at Warrnambool, which is now the Library of South West TAFE). The 40lb Armstrong Guns were recalled back to Melbourne when the government issued the updated 4.7inch QF (Quick Firing) Naval Guns, mounted on carriages, to the Warrnambool Garrison Artillery 1907. The Hastings Museum today holds one of the original 40lb Armstrong RBL guns that were at first at Hastings and then Warrnambool, evidenced by tracing the numbers on that gun. This gun has now been restored. Surviving 40 lb Armstrong BL Guns in Australia The Hastings Museum has restored one of the Guns that was at Hastings and then from 1904-1907 in Warrnambool. This Gun is now on display at the Hastings Museum. This ammunition shell from a 40lb Armstrong RBL gun is very significant because of its association with the Warrnambool Battery Field Artillery in the early 1904-1907. It is known that the original 40lb Armstrong RBL gun used in Warrnambool is now restored and on display at the Hastings Museum. Ammunition shell from a 40Ib Armstrong Rifled Breach loading (RBL) Gun. Metal bullet-shaped object, flat base, tapering to cone-shaped tip. Parallel equidistant ridges run from outer edge of base to position where cone shape begins. Tip has a square-shaped hole in the centre and has a very uneven surface. Base has corrosion and metal is flaking away. Does not contain explosives. Remnants of white paint-like substance in several places. From the Hastings, Victoria, area. Late 19th - early 20th century.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ammunition shell, 40 lb armstrong rbl gun, volunteer corps, war equipment, defence forces, warrnambool bettery field artillery, hastings battery field artillery, defence of warrnambool

Ammunition shell was used in a 40 lb Armstrong Rifled Breach Loading (RBL) Gun. It does not contain explosives because the projectile and explosive were separate items. The Armstrong 40 lb BL Gun There were 4 x 40lb Armstrong (RBL) Guns issued to the Ham and Beef Battery at Hastings Victoria. After the Hastings Battery field artillery disbanded, the 4 Guns were transferred from the Hastings Battery to the Warrnambool Battery field artillery in 1904. (There is a photograph of one of these guns on its carriage, pictured in front of the Orderly room (Drill Hall) at Warrnambool, which is now the Library of South West TAFE). The 40lb Armstrong Guns were recalled back to Melbourne when the government issued the updated 4.7inch QF (Quick Firing) Naval Guns, mounted on carriages, to the Warrnambool Garrison Artillery 1907. The Hastings Museum today holds one of the original 40lb Armstrong RBL guns that were at first at Hastings and then Warrnambool, evidenced by tracing the numbers on that gun. This gun has now been restored. Surviving 40 lb Armstrong BL Guns in Australia The Hastings Museum has restored one of the Guns that was at Hastings and then from 1904-1907 in Warrnambool. This Gun is now on display at the Hastings Museum.This ammunition shell from a 40lb Armstrong RBL gun is very significant because of its association with the Warrnambool Battery Field Artillery in the early 1904-1907. It is known that the original 40lb Armstrong RBL gun used in Warrnambool is now restored and on display at the Hastings Museum.Ammunition shell from a 40Ib Armstrong Rifled Breach loading (RBL) Gun. Metal bullet-shaped object, flat base, tapering to cone-shaped tip. Parallel equidistant ridges run from outer edge of base to position where cone shape begins. Tip has a square-shaped hole in the centre and has a very uneven surface. Base has corrosion and metal is flaking away. Does not contain explosives. Remnants of white paint-like substance in several places. From the Hastings, Victoria, area. Late 19th - early 20th century.flagstaff hill maritime museum and village, great ocean road, shipwreck coast, ammunition shell, 40 lb, war equipment, hasting battery field, defence of warrnambool

Separator machine. Hand-crank operated milk separator, Crown Separator Co Pty Ltd. Multi-part separator stand with bowls (2) and attachments including a spanner small cone shaped objects on homemade stand. ."42D022" stamped on 2x separator chutes.Manufacture's plate "MADE IN SWEDEN" , "CROWN SEPARATOR / HEAD OFFICE 547 FLINDERS ST MELBOURNE". ."42D022" stamped on 2x separator chutes. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, milk separator, farm machinery, dairy machinery, dairy industry, crown spearator co, cream

Slide. Bendigo Views. Unknown view of buildings with tall cone shaped roofs. The first and third buildings are gold and the second one is dark brown. Buildings at the back have dark red gable style roofs with white ridging. There is a stone fence along the front.slide, bendigo, bendigo views, bendigo views

This item is situated in the Gardens of the Bendigo District RSL Sub Branch Inc Havilah Road. Refer photo .1) for the details re manufacture and history/use..1) Plaque on metal stand, black with white text re details of a 500 Lb Bomb. .2) Weapon, 500 lb General Purpose Aerial Bomb, cylindrical shape, nose cone tapers to a point, tail tapers to near point with 4 fins attached. bdrslinc, smirsl, brsl, 500, bomb

In 1961 Robin Boyd designed the Tower Hill Reserve Visitors Centre to fit naturally within the surrounding terrain. The building’s shape reflects a volcanic cone. The windows allow a 360-degree view of the park. The Centre opened just after Robin Boyd’s death in October 1971. Project: Tower Hill Lake Reserve Museum drawn by Robin Boyd of Grounds, Romberg & Boyd. Drawing no 2. General view and external perspective. Watercolour on dyeline. tower hill, robin boyd, ohm2022, ohm2022_15

In 1961 Robin Boyd designed the Tower Hill Reserve Visitors Centre to fit naturally within the surrounding terrain. The building’s shape reflects a volcanic cone. The windows allow a 360-degree view of the park. The Centre opened just after Robin Boyd’s death in October 1971.Project: Tower Hill Lake Reserve Museum drawn by Robin Boyd of Grounds, Romberg & Boyd. Drawing no 3. Watercolour on dyelinetower hill, robin boyd, ohm2022, ohm2022_15

The object was donated by Ramsay Surgical Limited in 1944. Cylindrical metal face mask with a high neck that is open at both ends. The larger opening was placed over the patient's mouth while the smaller opening, comprising a sponge to absorb the anaesthetic and a hinged perforated lid, was used to administer the anaesthetic.waring's cone, facemask, metal, sponge, anaesthetic, ether, ramsay surgical limited, cone

Speakers were used to amplify the sound of the movie being shown. The Pyrox Victor was for 16mm films and used from the 1940s.Used in the Kiewa Valley possibly at the Mt Beauty Community Hall for weekly filmsHeavy large red box with 'Pyrox Vicor' on one side. 'Rola' is inscribed at the end of the cone and centred in the front. The company, Rola, of Richmond, Victoria, Model 12U. Circa 1940s. It has a long electrical cord alo inside the case. Both speakers are the same except one is in a poor condition. pyrox victor, rola manufacturers, film projector speakers

This tool kit was purchased by Bob Gardiner in the 1950s to maintain his bicycle when he used to ride to work in ringwood.Bicycle Repair Kit enclosed in a canvass carrier which has four slots for the tools and two straps with buckle to secure it when it is rolled up. Includes two tyre levers, block spanner, screw driver, cone spanner with a hex shaped spanner in centre and a centre bracket shifting spanner at the end.Deelandtransport, bicycles

This item was acquired by the Ballarat School of Mines Electrical Engineering department for use in electric power laboratory as a source of D.C., and also for instructional purposes. This central mercury arc element was located in a cabinet with transparent side panels, and equipped with the required electric accessories, to be a self-contained stand-alone unit. Head of the Electrical Engineering Department at the time was John M. Sutherland.Mercury arc rectifier, 3-phase input. Constructed of blown glass, and complicated configuration: the central inverted truncated cone is provided with 3 large diameter "horns' and four smaller ones. Each horn has electrical connection to outside, some have side horns. Approximately half a cup of free mercury inside the glass complex. No. 33369scientific instrument, x-ray, x-ray tube, xray, john m. sutherland, electrical engineering, ballarat school of mines

A copy of the 1970 Telephone Directory for Balranald, Bendigo, Castlemaine, Maryborough, Charlton, Deniliquin, Echuca, Kerang, Kyneton, Swan Hill districts. The book is a faded green and the front cover has a picture of a Possum sitting on a tree in the wilderness on it. The back cover also features an ad for Peter's Icecream with a picture of a girl eating an icecream inside a cone.book, rural

Green marbelled board cover with black leather spine & corners. Surface rubbing of board and leather, leather spine cracked at coners. Binding intact but spine detached at front cover. Six decorative gilt bands on spine. Title in gilt on spine. P. 177 torn, loose. P. 175 loose. 304 pp. Fair condition.Label inside front cover 'from Chapman Family'. Pressed pansies between pp. 99-100.scriptures, children, kilmore mechanics institute library.

Early form of home heating and because of the copper dish was considered one of the better models|Manufacturing History Museum Victoria|Commentary: Australian manufacturing history Philip Wollen|Many years ago, when I was an ambition young man, I took over a company called Hecla.|This business was formed in 1872, long before Federation was even contemplated. The company established a rich tradition in the Australian manufacturing industry. The prodigious product range included kettles, mixers, toasters, hairdryers, urns, pie warmers, bain maries, and electric blankets for the domestic and commercial market. During the war it even manufactured parts for aircraft. It was one of Melbourne's largest employers.|Hecla was one of the pioneers in TV advertising, led by icons like Bert Newton, Bobby Limb, Evie Hayes and Graham Kennedy who ad Jibbed his way through irreverent and unscripted naughtiness about Hecla electric blankets and foot warmers. The slogan was 'By Hecla, its good.'. One can imagine the fun Bert and Graham had with their double entendres.|In the 60's Hecla entered into a partnership with General Electric and expanded rapidly. The massive factory, on the corner of Alexandra Parade and Chapel Street overlooking the Yarra River was a Melbourne landmark.|The business was formed by one of the scions of Melbourne industry. Mr Marriott was a metal worker of some repute, building the lights in front of Melbourne's Parliament House, the first steam car, the sideboard at the RACY Club, and the first factory to run on electricity.|By the time I acquired the company it was a shadow of its former self, incapable of competing with cheap Chinese imports. Wandering around the warehouse late one night I discovered a large, boarded up storeroom which appeared not to have been opened in decades.|Over several months I combed through the room, unearthing a treasure trove of products from a bygone era. Dusty files, engineering drawings, wooden prototypes, patent records, and correspondence from distributors on every continent.|I decided to track down an old man, Ray, long retired after 50 years with Hecla. He was not well off financially and welcomed the paid work. It turned out that he had done his apprenticeship with the company and there wasn't much he didn't know about it. He had been personally involved in the manufacture of almost every type of product on the Hecla smorgasbord's of products.|So for over 2 years he methodically assembled a mini museum of Hecla products, painstakingly polishing them and ensuring they were in working order. He attached the original brochure of each product and their respective warranty cards. For him it was ,a labour of love. For me it was a fascinating, if vicarious journey, into Australia's manufacturing past.|My colleagues complained that I was wasting money on his salary, our time and factory space on stuff that should have been dumped years ago. I tried to explain that I was merely a steward of the Hecla tradition, not merely an owner. Besides, the look on Ray's face convinced me that there was another dynamic at work. One I could see, but didn't really understand.|After he Passed away I faced a dilemma. What to do with this 'museum' of Hecla history. Nobody was interested.|So I kept the 'stuff' in private storage, hoping that same day someone would be interested in it. And the years passed.|Finally, I had a brainwave. Perhaps the Melbourne Museum would be interested. It was a long shot but I made the call. I had a nagging suspicion that they would think I was simply trying to get them to relieve me of paying for this huge collection to be taken to the tip.|To my surprise they said they would be willing to take a look, I secretly hoped that they would take the whole collection and not leave me with an incomplete jumble of appliances that I would indeed have to take to the tip.|On the appointed day, four serious looking young people showed up. Armed with digital cameras, note books and poker faces they spent four hours analysing the goods and the supporting materials. I asked them if they had any interest and their response was decidedly non-committal. It depends on the acquisitions committee, I was told. I was disheartened and packed up the exhibits to go back into storage.|Imagine my surprise when months later they telephoned to say that they had researched the history of the company, and yes, they would like to take the whole collection. And a truck with 'handlers' would arrive the following day to pick it up. Two years ago all Hecla's archives left me forever and went to the Museum's warehouse.|Well, to my delight I received a call yesterday inviting me to a private viewing of the exhibition at the Melbourne Museum. These young historians had meticulously assembled an impressive display of Melbourne's industry and technology going back to the 1800's. They thanked me like a significant benefactor when it is I who should have thanked them.|I saw the excitement in the eyes of these young people who had somehow managed to dig out and assemble memories from Australia's past. If this is the standard of care that the curators of the Melbourne Museum show all their exhibits, our history is in safe hands.|Their meticulous work took me back to those years long ago when I saw an old man lovingly assembling and cataloging a lifetime of his work.|It took me back to the day when Australians actually made things. Long before we became a nation of quarrymen. Before we became animal-factory 'farmers'. Of a time when products didn't break down, or dumped and replaced before the warranty expired. When men like Mr Marriott cared deeply about what their hands produced.|It reminded me of the call I received from an elderly lady in Tasmania asking for the electrical element for a Hecla K7 kettle. I searched the archives and called her back. The K7 was produced decades earlier and we no longer carried that spare part. She was quite disheartened and told me her kettle had finally 'given up the ghost' and she couldn't bear to part with it. It was a present from her husband on their wedding day 45 years ago. Her final words were 'they don't make them like that, do they? By Hecla they were good.'|I'm glad I followed my instinct and put Ray back on the payroll all those years ago..|I like to think Mr Marriott would have been pleased.Pedestal radiator. Base is cast iron with three feet with rose design on each. Pedestal supports a copper spherical reflector plate which has an electrical connection box at its base. The connection box is joined to the pedestal by a screw and nut to enable the reflector to be tilted. The element is cone shaped and is in the centre of the plate. The element is protected by a wire guard.Hecla Firedomestic items, heating