A saw is a tool consisting of a tough blade, wire, or chain with a hard-toothed edge. It is used to cut through material, very often wood, though sometimes metal or stone. The cut is made by placing the toothed edge against the material and moving it forcefully forth and less vigorously back or continuously forward. This force may be applied by hand, or powered by steam, water, electricity or other power sources. An abrasive saw has a powered circular blade designed to cut through metal or ceramic. In ancient Egypt, open (unframed) saws made of copper are documented as early as the Early Dynastic Period, circa 3,100–2,686 BC. Many copper saws were found in tombs dating to the 31st century BC. Models of saws have been found in many contexts throughout Egyptian history. As the saw developed, teeth were raked to cut only on the pull stroke and set with the teeth projecting only on one side, rather than in the modern fashion with an alternating set. Saws were also made of bronze and later iron. In the Iron Age, frame saws were developed holding the thin blades in tension. The earliest known sawmill is the Roman Hierapolis sawmill from the third century AD used for cutting stone.The subject item is believed to date from around the mid to late 20th century and is regarded as a modern item. The maker is unknown but the pattern or design and type of wood used indicate it is a tool of modern manufacture. Compass saw blade with wooden with open handle blade attached with wingnut lever at side to adjust long narrow blade Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, wood cutting, wood saw, cross cut saw, cabinet makers tools, wood working tools, tool

This item was rubbed several times on each side of a glass ampoule or vial to make a cut in the glass, after which the head of the ampoule/vial was snapped off.Dr Mitchell Henry O'Sullivan worked in the Victorian country town of Casterton as a general practitioner from 1919 until his death in 1977. He also practiced obstetrics. His son, Dr David More O'Sullivan donated his obstetric bag and its contents to the College in 1999. The bag and contents are a unique time capsule of the type of instruments and pharmaceuticals used in the inter-war period.Small metal blade, approximately 4.5cm in length. The upper edge of the blade is smooth, and the lower edge has a line of fine serrations for cutting.

During early farming in Australia (before motorised whipper snippers) the hand held sickle was used to cut long grass, in this case in or around railway tracks. The inside of the blade's curve was sharp, so that the user can either draw or swing it against the base of the grass, catching the stems in the curve and slicing them at the same time. Historic - Railway Permanent Way and Works - track equipment - Grass SlasherWrought iron sickle with extended with wooden handle.puffing billy, extended sickle, farm tool, reaping hook, curved blade, grass cutting

There are two categories of cutting edge on broad axes and both are used for shaping logs by hewing. 1. Single bevel axe - one side is flat and the other side bevelled, also called a side axe. The handle may curve away from the flat side to allow an optimal stance. The flat blade but can only be worked from one direction and is right-handed or left-handed. 2. Double bevel axe - both sides are bevelled and produces a scalloped cut. The axe has a straight handle and can be swung with either side against the wood. A double-bevelled broad axe can be used for chopping or notching as well as hewing. Broad Axe - Double bevelled edge Straight wooden handlesmall lettering and government crows foot

An Adze is versatile cutting tool similar to an axe but with the sharp cutting edge perpendicular to the handle rather than parallel. The wooden handle is straight and the blade has a slight curve. They are used for smoothing or carving wood such as sleepers An adz, with its long handle, cuts with the grain, and the nature of the chips is different from an axe. While they have a similar shape, they should never be confused with a hoe or mattock used for agriculture and horticulture. Adze - smalltimber tools

Used for cutting men’s hairMetal hair clippers with two handles and a screw to tighten the metal blade. See also numbers 0027. 0028 and 1369 2562 2975Need to view items to measure and look for markings

Curved steel blade with serrated edges finishing in a fine tip. Wooden handle. Used for cutting grass and hay.Makers Mark|4rural industry, agriculture

Could have been used for mining?Tomahawk with metal head & wooden handle. Head has hammer one end, cutting edge other end, nick in blade possibly for pulling nailstools, hand tools

Hand made knives during WWIITwo knives made of stainless steel blades, soldered into what appears to be .303 bullets with shells that are used as handles. One knife has a three scallops on the top (blunt part of the knife) with a shaped cutting edge. On the base of the cartridge, a coin is soldered on that covers the primer and entire base of the cartridge. The coin appears to have Arabic writing on it. The other knife is scimitar in shape. At the base of the cartridge a 1941 Netherlands East Indies 1/10 Gulden Colonial Coin is soldered. This coin covers the primer and entire base of the shell.One coin has "Nederl Indie 1/10 G 1941"

Used for clearing way when traversing thick scrub or jungle, long grass. Cutting down saplings, bambooPlastic Handle with safety rope, Steel blade,Scabbard with claspaustralian machette as used in wwii, korea, malaysia, vietnam

Blades were used for cutting cloth, and weights were used on a weaving loom.Seven metal blades, each having one end square shaped, tapering to narrower end which has metal handle attached. Five metal weights, cylindrical. One has hooked metal pieces attached to its top.Wording: DA 203;Method: Cast;Location: Bottom of one weight Wording: 573;Method: Cast;Location: Bottom of one weightweaving, textile, machinery, textile industry, blades, weights

Important tool especially for infantry and used for range of purposes while in the field.Machete was a versatile tool for soldiers but infantry in particular. It assisted with negotiating through thick scrub, various cutting usages; also assisted, with shovel, in digging usages. Machete: metal blade, wooden handle with wrist strap; sharpening stone; canvas holder for machete with pouch to contain sharpening stonevietnam, vietnam war, diamond valley vietnam veterans sub branch, equipment

Shears as used in fabric and leather cuttingShears as used by Holden and Frost in their production of numerous objects Ca 1900Sort handled long bladed upholstery shearsSheffieldshears, fabric

Made approximately 1890An all steel docking saw with a rough toothed blade used to saw rough wood. The steel eight hole decorative patterned handle is rivetted on with two steel rivets. hand tools, woodworking tools, carpentry tools, steel, hand saws, saws, cutting tools

Used in the late 19th century.A steel bladed wooden curved handled Shingle Splitter sometimes called a Paling Knife used for splitting or cleaving timber. It has two crossed hammer shape symbols stamped at the beginning and end of the inscription - Wolpin Wedge Mills. It was used in the late 19th century.Wolpin Wedge Millssteel, wood, froes, cleaving axes, axes, cutting tools, hand axes, woodworking tools

Used by Wandin T SebireA forged steel 'M' toothed crosscut saw with wooden handles bolted on. It was used to saw rough wood or cross cut wood against the grain in the late 19th Century.'W' is stamped on the blade.hand tools, woodworking tools, carpentry tools, steel, hand saws, saws, cutting tools, crosscut saws

Used in the 19th century.A forged steel narrow bladed double Peg and Rake toothed crosscut saw with no handles. It was used to saw rough wood or cross cut wood against the grain in the late 19th Century.Stamped on the saw: made of Simond Steel, Trade mark Reg. Warranted The Simond Saw Est 1832, Simond Steel & Saw co USA. Crescent Ground Steel Mill, Lockport New York. Factories Fitchburg Mass, Montreal Quebec No 325hand tools, woodworking tools, carpentry tools, steel, hand saws, saws, cutting tools, crosscut saws

Used in the 19th century.A forged steel broadaxe head without a handle - it has a hole for the handle. It can be known also as a trimming axe blade or a long bearded axe because of its beard shape. It was commonly used in manufacture of square timbers for wooden shipbuilding, log building, timber framing and railroad ties. It was used in the 19th century.woodworking tools, steel, froes, cleaving axes, axes, cutting tools, hand axes, broadaxes, felling axes, hewing axes, axe heads, tool components

Used in the 19th century.A forged steel long narrow sharp bladed felling axe head without a handle - it has a hole for the handle. It was commonly used to chop down trees as it has a more elongated and rigid blade excellent for deep gouging cuts.The length of the handle, weight of the head and angle of the blade all play a role in just how deep it cuts. It was use din the 19th Century.There is a small grooved pattern on the head where the handle would attach. A circular indentation is evident.woodworking tools, steel, froes, cleaving axes, axes, cutting tools, hand axes, felling axes, axe heads, tool components,

Used in the 19th century.A long bladed forged steel adze head. It was used by woodworkers for cutting and trimming rough wooden planks and shaping and smoothing wooden surfaces in the late 19th century.woodworking tools, steel, froes, cleaving axes, axes, cutting tools, hand axes, adzes

Used in the 19th centuryA bill hook or axe-handled slasher which is an axe-handled forged metal blade with a strong curved sharp axe like edge and a straight secondary edge on the back. It has a broken wooden handle with steel or a tang which passed through the handle if it were still attached. There is stamped on the blade near the handle join - '2'. The original finish of the blade would have been, 'Japanned' which is baked black enamel. It was used to cut back scrub, small trees and woody vegetation in the 19th century.'2' stamped on the blade near where it joins the handle.slashers, cutting tools, bill hook slasher, gardening tools, agricultural tools

Used in the 19th century.A forged steel unusual long winged axe head blade without a handle - it has a hole for the handle. Originally it was "Japanned" finished' with black baked enamel which is now peeling off. There is a indented small zigzag pattern on the head where it would meet the handle. It was used in the 19th century possibly as a trimming axe.Whitehouse and Sons Cannock Warrantedwoodworking tools, steel, froes, cleaving axes, axes, cutting tools, hand axes, broadaxes, felling axes, hewing axes, axe heads, tool components

Used in the 19th century.A wide bladed forged steel adze with a smooth curved wooden handle. It was used by woodworkers for cutting and trimming rough wooden planks and shaping and smoothing wooden surfaces in the 19th century.woodworking tools, steel, froes, cleaving axes, axes, cutting tools, hand axes, adzes, wood

Used in the 19th century.A wide bladed forged steel Cooper's Adze head with a curved blade. There is no handle. At the opposite end there is a hammer shaped head. It was used by woodworkers for cutting and trimming rough wooden planks and shaping and smoothing wooden surfaces in the 19th century.woodworking tools, steel, froes, cleaving axes, axes, cutting tools, hand axes, adzes

A small vintage handmade metal rectangular meat chopper with a short metal handle attached to the very sharp blade. It has a turned, patterned curved wooden handle joined to this.cutters, cutting tools, butchers tools, meat chopper, cleavers, butchers knives

This item is from a collection donated by descendants of John Francis Turner of Wodonga. Mr. Turner was born on 6 June 1885. He completed all of his schooling at Scotts Boarding School in Albury, New South Wales. On leaving school, he was employed at Dalgety’s, Albury as an auctioneer. In 1924 John was promoted to Manager of the Wodonga Branch of Dalgety’s. On 15/03/1900 he married Beatrice Neal (born 7/12/1887 and died 7/2/1953) from Collingwood, Victoria. They had 4 daughters – Francis (Nancy), Heather, Jessie and Mary. In 1920, the family moved from Albury to Wodonga, purchasing their family home “Locherbie” at 169 High Street, Wodonga. "Locherbie" still stands in Wodonga in 2022. The collection contains items used by the Turner family during their life in Wodonga. This "lady’s" fruit knife was used up to the late 1900's by influential and "well off" ladies, not only as a fashion statement but as a practical tool when away from the kitchen/home to peel fruit and provide a cutting instrument for small items. The first true stainless steel was melted on August 13,1913. However, it did not produce blades that held an edge nor could edges be put onto blades easily so its inventor, Harry Brealey soon earned the reputation of being the inventor of the "knife that would not cut". Over the following decade further developments to the composition of stainless steel led to its wide use in the manufacture of cutlery.A small fruit knife with stainless steel blade. It has an ivory handle and a leather cover for the blade.On blade: Stainless Steel"cutlery, stainless steel, lady's fruit knife