Double Bridges was the breakfast stop on the Bairnsdale Omeo coach trip, the horses were changed there.Black and white photograph of coach and horses at Halfway House Hotel when A Lucus was publican, ten people in front of the building which was situated at Double Bridges midway between Bruthen and Tambo Crossing Victoriatransport, hotels

Murray Comrie Collection. This two-storey building was built in 1866 by the Colonial Bank of Australasia. Before this, the site had been occupied by Foo's shop. Whilst it was being built, the Colonial Bank operated from Company's Hotel (later known as Burstall Hall and the Council Chambers). The double-storey building in this image was used by the Colonial Bank from 1866 until 21st February, 1888. The premises were sold to the Union Bank for £2500. The Union Bank moved in and commenced operations on 6th June 1888, continuing until 1942. The building was later used as a general store until the 1990s. It is now a private residence. This is a reasonable copy of an older original. Copy probably made by Murray Comrie in the 1960s.Monochrome photograph of the double-storey bank in Tarnagulla. tarnagulla, banks, union bank, buildings

This knitting pattern book was published by Sirdar Wools (Australia) Pty Ltd, and contains knitting patterns for childrens hats.GROWING UP IN SIRDAR / 659 / 15 / CENTS / 1/6 / SIRDAR / Double knitting, Double Crepe wool / or Super Nylon double knitting / Ages 8-12 yearsknitting handicrafts - history, sirdar wools (australia) pty limited, knitting, handicrafts - history

Photograph was owned by Mr Harry Harradence who worked for Australian Estates wool brokers (Sunshine Road, Tottenham) between 1944-88. This photo dates from the 1960s and depicts wool bales being loaded into the double dump wool presses at Australian Estates.Photograph of wool bales being fed into a double dump wool press in the Australian Estates Co. Ltd wool store, c.1960s.wool brokering wool - transportation, australian estates company ltd, wool press - double dump, wool brokering, wool - transportation

Model of typical UK double deck, four-wheel tram made by Matchbox models. Notes that over 3000 similar trams were provided to nearly 50 operators by Dick Kerr, later the United Electric Car Company of Preston. Painted in the colours and livery of London Transport. Demonstrates of a model of a Preston UK built double decker tram in London Transport colours. This type of tram was a very popular body in the UK.Model of Preston (UK) double deck tram type Y15 - diecast, painted in a card board box by Matchbox with details of the tram on the rear.models, tramcars, dick kerr, uk trams, london transport, matchbox models

Wal Jack collected tramway and railway items for his collection. This item, the front page of the Sydney based weekly magazine The Bulletin, features an image of double deck horse trams in Dublin Ireland with an explanatory caption, though there is no mention of the trams.Demonstrates trams and a city that would have interested Wal Jack.Newsprint - front page of The Bulletin, 31/5/1944, featuring a photo and a long caption of Sackville Street Dublin with horse drawn double deck trams.letter, wal jack, horse trams, double deck, dublin, the bulletin

A letter from Mountain Lodge to a Mrs Jenny Wright including tariff rates and dates for accommodation at Mountain Lodge in 1990.A letter from Mountain Lodge to a Mrs Jenny Wright including tariff rates and dates for accommodation at Mountain Lodge in 1990.Not 26/27 MAY/ $176 doublemarysville, victoria, australia, mountain lodge, accommodation, letter

This patchwork quilt or bedspread is a modern creation along the lines of the traditional 1800s handmade English paper piecing patchwork quilting craft. It is made from reproduction fabric and quilt designs and represents the bed linen typical of a late 19th-century bedroom. Years ago, patchwork was a form of recycling, where leftover or previously used pieces of fabric were used to create other useful item such as quilts, rugs, cushion covers and jackets. Special projects were sometimes made with fabrics representing special memories, such as pieces from baby clothes, wedding gowns, and school uniforms. The maker would use a cardboard template shaped like a hexagon, place it onto the fabric and trace around it. Often the cardboard was cut from a box such as a cereal box. Women would gather to work on their patchwork while enjoying their social time together. As in the case of this quilt, members of the South Western Branch of the Embroiderers Guild in Warrnambool worked on the project, designing and quilting as a group to achieve their aim, of presenting the quilt to the recently opened Flagstaff Hill Maritime Museum. It was the first Group Project of the Branch which was formed in 1974. In 1975 the members decided to make a Quilt as a project to promote the formation of friendship and togetherness. Under the foundation Treasurer, Rita Williams, members sourced their own fabrics for the 'flowers' which were then stitched into the calico borders. Provision was made for the quilt to be hung for display, with the addition of loops along one edge. The local disability services employees and members cut out octagonal paper batches and used their own fabrics to piece them together. The Branch's first exhibition raised funds for buying fabric and equipment to assemble the patchwork. The quilt was perfectly suited to dress the bed in the Lighthouse Keeper's Cottage. This carefully created and designed, recently made patchwork bedspread typifies bedding and handcraft of the late 19th century. The English paper patchwork technique was used. The quilt was the first community project of the South Western Branch of the Embroiderers' Guild of Victoria, and presented as an addition to the Lighthouse Keeper's Cottage tat Flagstaff Hill. Patchwork quilt or bedspread, double bed size, made from hundreds of hexagonal-shaped fabric of various colours and patterns, carefully stitched onto a white background. It was made using the English paper patchwork technique. One edge of the quilt has loops dispersed at regular intervals. This would allow the quit to be used as a wall hanging. It was handmade by the South Western Branch of The Embroiders Guild, Victoria, and presented to Flagstaff Hill Maritime Museum and Village in 1976. An inscription is embroidered in blue on a patch of the quilt. "Made and Presented by The Embroiderers Guild, Victoria (S.W. Branch) 1976"flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, bedspread, patchwork quilt, quilt, embroiderers guild, bedding, bed linen, 1800's handcraft, quilting, south west branch, warrnambool embroiders guild, recycled fabric, 19th century, household textiles, english paper patchwork, paper patchwork technique

A double-bevelled broad axe can be used for chopping or notching and hewing. When used for hewing, a notch is chopped in the side of the log down to a marked line, called scoring. The pieces of wood between these notches are removed with an axe, called juggling, and then the remaining wood is chopped away to the line. Broad axe head; handmade. A metal, T-shaped axe head, double-bevelled, with a formed slot for adding a wooden handle. The shape is common; a Canadian pattern. warrnambool, shipwreck coast, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, hewing axe, timber working tool, forestry, axe head, braod axe, lumber, building, handmade, forged, iron, steel

Collected by Charles Honybun during WW1.Aircraft parts reputed to be part of the aircraft used by Baron Von Richtoven (Red Baron). metal part for tightening wing struts 4 of double toggle NA4963. 2. (x1) wooden pulley from wing NA4963 3. Pistol Bullet Spent NA4963metal part fro tightening wing struts 4 of double toggle NA4963 1-4 2. (x1) wooden pulley from wing NA4963.5 3/- Pistol Bullet Spent NA4963.6ww1, charles henry honybun

Model of a Hong Kong double deck tram, No. 45 made by Bachmann models, China. Painted in an overall advertising scheme for Prime Routing for JCDecaux advertising.Demonstrates of a model of Hong Kong double decker tram.Model of Hong Kong double decker tram in cardboard box, clear plastic packaging, instruction sheets made fitted with a motorised bogie, trolley pole. Model shows seats and stairways on upper deck. HO Scale. Model is operable.models, tramcars, hong kong, bachmann models

book. 22 pages. Coloured images and text. One double page loose from centre.annual report, financial documents

Four page booklet with black and white text, front cover shows colour images of tableware, with tea cosies and egg cosies. [printed] PRESENTED / with / WOMAN’S / WEEKLY / TEA and EGG COSIES / Double Knitting and 3-ply Wool / DOUBLE KNITTING / 3 / PLYfashion, women, knitting, crochet, home life, patterns

A series of scripts for film/video promoting Australian building materials for export to Singapore. Script on pink foolscap is a different script. The double-sided blue carbon copy script is a slightly different version of the first two pages of the 4-page carbon copy on foolscap script.Crawford Productions and Robin Boyd also explored ideas for other television productions, besides the successful 'The Flying Dogtor" series.Typewritten, 1 double-sided page blue carbon copy on foolscap, 1 page carbon copy on pink foolscap, 4 pages carbon copy on foolscap. 6 pages totalbuilding materials, henry wilckens, singapore, malaya, export, advertisement

The series of five photographs feature various stages of the demolition of a double fronted brick Victorian cottage which was on the east side of Evans Street opposite the railway line and local football ground. A KFC complex now occupies the site.A coloured photograph in landscape format showing a double fronted Victorian brick cottage undergoing demolition. The slates on the roof have been removed. The front and side walls are intact. Some rubble is on the ground in front of the verandah.victorian cottages, house demolitions, evans street, george evans collection

Double article about seven former Australian nurses return to Bangka Island, Indonesia for the dedication of a memorial to their comrades from aboard the SS Vyner Brooke that was bombed and sunk.A double sided page from a colour newspaper featuring three headlines, two colour photographs of people and two columns of text. The photograph relating to this record has a group of mostly older women sitting and standing on sand with three men in military uniform.[asterix drawn in black ink at top of page in the middle]wwii, world war 2, world war two, wwll, australian army nursing service, aans, bangka island, ss vyner brooke, nurses memorial, jean ashton, carrie jean ashton, florence elizabeth trotter, florence elizabeth syer, janet patteson gunther, pat darling, janet patteson darling, ellen mavis hannah, mavis allgrove, ellen mavis allgrove, vivian bullwinkel, vivian statham, wilma elizabeth forster oram, wilma elizabeth forster young, joyce tweddell

George Rose was well known Australian photographer and postcard maker in the first half of the 20th century. This sterograph shows recruits training at Geelong during the First World War. Soldiers were trained to attack in short rushes rather than advancing in line due to the lethal power of the machine gun. The stereograph was an early technology that used double images to achieve a three dimensional image. Rectangular piece of cardboard with a stereograph image attached to the front. The image is a double reproduction of a black and white photograph. the photograph depicts a line of soldiers lying on the ground. AUSTRALIAN EXPERDITIONARY FORCE, GEELONG. Training Recruits in the Art of Attacking in Short Rushes. Copyright by Geo. Rose.wwi, rose series, postcard, lara, geelong, rsl, training, stereograph

Mrs Potts Sad Iron Set . This double point design with detachable handle was patented in the United States of America by Mary Potts in 1871. It was sold in sets of three bodies with one handle and a stand or trivet. The detachable insulated handle was designed to always remain cool for ironing. The handle was detachable, so that several irons could be on the stove at one time and the handle swapped between several bodies. This item is an example of an invention that was universally adopted to make the task of ironing safer and more efficient.A set of double pointed flat irons which detachable handle. This set includes a trivet to rest the unused iron on. All components are made from cast irondomestic appliances, flat irons, sad irons, mrs potts irons

Black and white photgraphBack: "Double exposure of cobra and obelisk" handwritten in ink

Dark Blue RAAF Gaberdine Overcoat. Gold plastic button Queen's Crown Complete with waist belt.RAAF embroided in white cotton on the epaulettes. Double Breasted.

This local flower show award from 1905 together with others in the collection demonstrates the significance of such shows as a form of social activity as well as horticultural science over the decades. It is also an example of church groups being involved in the social fabric of the community and activities that embraced all segments of the community of different religious persuasions as the certificate was awarded to Michael Taffe, a Roman Catholic in a Church of England enclave. The Girls' Friendly Society founded in England in 1875 was an Anglican Church group which formed to give maids and female domestic staff spiritual guidance and social activities for their days off. The first local Australian branch was formed in Adelaide in 1879 with branches being established in Ballarat from the 1880s. Other certificates from 1899 to the 1930s in this collection of Taffe awards come from a range of faiths and community groups. This award is one of a family collection from the nineteenth century through to the twenty-first century further demonstrating horticultural enthusiasts exhibition participation across generations.This certificate evidences one of the activities of the Girls Friendly Society St Paul's Branch in a community event that embraced the local community. The Girls Friendly Society commenced in Ballarat in the 1880s and this certificate evidences one way in which the movement not only raised funds but actively involved itself in the local community regardless of creed.Inscribed 'Stock Double Mr M J Taffe'.girls friendly society, st paul's, flower show, 1905,, ballarat

One of a collection of 56 knitting pattern books donated by Mrs Hilma Carruthers. These books had been used by Mrs Carruthers, her mother and her two daughters. This booklet was produced by Sirdar (UK) and contains three knitting patterns for tea pot cosies.Sirdar / No. 1797 / DOUBLE KNITTING WOOL / OR / SUPER NYLON DOUBLE KNITTING / TWO SIZES / 15 / CENTS / 1'6 / MODEL 'A' / MODEL 'B' / MODEL 'C'handicrafts - history knitting, harrap bros. (sirdar wools) ltd, handicrafts - history, knitting

1957 was the ninth show held in aid of the Eltham War Memorial Trust.6 page double fold, double sided, printed in blue1957, billy cart, billy cart derby, bolton steet, easter gymkhana, eltham easter gymkhana 1957, eltham war memorial trust, hoyt's skyline drive-in theatres, panorama avenue, soap box derby, soap-box derby

Safety razors had been developed in the mid-19th century, but still used a forged blade that dulled and rusted. In the 1870s, the Kampfe Brothers ( Germany) introduced a type of safety razor. Gillette improved these earlier safety-razor designs, and introduced the high-profit-margin stamped razor blade steel blade. Gillette's innovation was the thin, inexpensive, disposable blade of stamped steel. King Camp Gillette observed in 1902 that as existing, relatively expensive, razor blades dulled quickly and needed continuous sharpening, a razor whose blade could be thrown away when it dulled would meet a real need and likely be profitable. In 1918, when the U.S. entered World War I, the Gillette company provided all American soldiers with a field razor set, paid for by the government, and as they were allowed to take them at discharge they continued their use of this product thus ensuring future sales. An unused, wrapped, man's razor blade in a box. 7 O'clock brand '7 O'CLOCK / REGD. TRADE MARK / BLADES / DOUBLE EDGED shaving equipment. razorblades, safety razors, cheltenham, moorabbin, bentleigh, pioneers, early settlers

00049.1 Short sleeved jacket - no rank. 00049.2 White trousers. 00049.3 Long sleeve jacket with white Bow TieShoulderinsignia AUSTRALIA. 00049.3 showing Gunlayer rank with double knot.

A letter written from Charles Quinn to his mother in 1946 depicting his time spent travelling from Sydney to San Francisco.This letter is of historical, social and interpretive significance as it provides information about the life of a seaman during the mid 20th century.Two page, double sided letter (0348.a1-a2) written on 21/02/46 from San Francisco from Allen to his mother with envelope (0348.b)Two double sided pages of script beginning with. "My Dear Mum...Arrived here on Wednesday being 2 days overdue...." Inscription on the top left hand corner which states. "M. I. Goonawarra/San Francisco/21-2-46" Inscription on the envelope. "Mrs. S Quinn/San Lorenzo/63 Ocean Beach/Manly N.S.W/Australia."charles quinn, sydney, san francisco, mission to seafarers, 1946, seafaring

Double Headed Rail from Ravenswood Station Siding which was dismantled circa 1987 the two rails were stored for a time at Maldon before being donated to Puffing Billy Museum Bearing makers marks of Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield, North East Derbyshire, England from 1872 - 1883 Double-headed rail In late 1830s Britain, railway lines had a vast range of different patterns. One of the earliest lines to use double-headed rail was the London and Birmingham Railway, which had offered a prize for the best design. This rail was supported by chairs and the head and foot of the rail had the same profile. The supposed advantage was that, when the head became worn, the rail could be turned over and re-used. In practice, this form of recycling was not very successful as the chair caused dents in the lower surface, and double-headed rail evolved into bullhead rail in which the head was more substantial than the foot. Info from Wikipedia - Rail Profile https://en.wikipedia.org/wiki/Rail_profile The first records of double headed rail being used In Victoria by Victorian Railways was in 1859, the rails, chairs, oak and trenails were imported from UK. After the 1870’s the Victorian Railways went over to using flat bottom rails, but they still needed replacement double headed rail for lines already laid and this continued up to at least 1883 Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield England from 1872 - 1883 Mount Alexander & Murray River Railway The Melbourne, Mount Alexander & Murray River Railway Company received parliamentary assent in February 1853 to build Victoria's first inland railway from Melbourne to Williamstown, and Melbourne to Bendigo and Echuca. Construction commenced in January 1854 with work on a pier at Williamstown but lack of funds slowed progress, eventually prompting the company to sell out to the government. The 100-mile (162 km) section to Bendigo opened in October 1862. Its cost of £35,000 per mile made it the most expensive railway ever built in Australia. In 1864, the line was extended to Echuca, tapping into the booming Murray-Darling paddlesteamer trade. info from Museums Victoria - Victorian Railways https://museumsvictoria.com.au/railways/theme.aspx?lvl=3&IRN=450&gall=456 1863 Ravenswood Station open on the 1st Feb 1863 Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Ravenswood Siding When the Victorian Railways were established in 1856 they adopted one of the popular British permanent way standards - heavy 80lb (36.3kg) double-headed rail held up right in cast iron chairs attached to transverse timber sleepers by wooden pegs called trenails. The Ravenswood Railway siding was constructed in 1862 with 12 feet wrought iron double-head rail held in cast iron chairs with Ransom and May patent compressed keys. Trenails held the chairs to the sleepers and the joints were secured in joint chairs. Joints were subsequently joined using fish plates. It formed part of the Melbourne to Echuca rail line, initially known as the Melbourne, Mt Alexander and Murray River Railway. George Christian Derbyshire, the first Engineer-in-Chair of the Victorian Railways was responsible for the design and construction of the works. No new lines were built in Victoria using double-headed rail after 1870. The siding was disconnected from the main line in 1988. The Ravenswood Railway Siding demonstrates the original 1856 philosophy of the Victorian Railways to adopt British permanent way technology. The siding demonstrates significant aspects in the development of permanent way technology in England and Victoria over the period from the 1830's to the 1880's. The chairs in the Ravenswood siding are physical evidence of early railway technology rendered obsolete 120 years ago, namely joint chairs at rail joints and trenails to secure the chairs to the sleepers. The double-headed rail demonstrates an important stage in the evolution of British rail technology in the 1830s. The old fish plates, square headed bolts and square nuts demonstrate the success of fishing the rail joins. The Ravenswood siding demonstrates the earliest form of rail joint technology developed in England, and existing in Australia, the joint chair. In part of the siding the sequence of joint and intermediate chairs is consistent with the 1856 specifications, that sequence is rare with the joints secured in joint chairs. The survival of chairs in this sequence is rare and almost certainly demonstrates that they remained in continuous use at the same location from 1862 to 1988. This remnant of the Ravenswood siding has survived 126 years. The siding has proved to be the most significant of extant remnant double-headed sidings in Victoria, containing a rare combination of early permanent way technologies. Construction dates 1862, Info from Ravenswood Railway Siding Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/4693/download-report The remaining section of this siding is significant at the State and National levels in that it demonstrates the use of chaired rail by the Victorian Railways Department for the Trunk Lines and, more particularly, the following stages in the evolution of this long obsolete method of permanent way construction: a) The use of joint chairs and intermediate chairs at regular intervals inferring that the original wrought iron rail lengths were 12 feet, as is known through documentary sources to have been the case. The survival of chairs in this sequence is unique and almost certainly demonstrates that they have remained in continuous use at the same location and in the same sequence from 1862 to 1988 . b) The use of joint chairs and intermediate chairs designed for use with trenails. c) The use of later intermediate chairs designed for use with steel pins and the use of fished joints with steel double head chaired rail, representing a second method of constructing the permanent way using chaired rail technology. info from Ravenswood Siding - Melbourne/Echuca Railway Line - Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/70103/download-report Addition to Citation for Melbourne to EchucaRailway Line 1/10/1990 Double Head Rail The surviving lengths of double head rail with chairs on this railway compare with one surviving similar remnant on the Geelong to Ballarat railway and are representative of permanent way construction techniques applied exclusively to the two trunk railways of the 1860's. In this respect they are rare survivors and may be unique at the national level and of technical importance at the international level to the extent that they enhance contemporary understanding of early railway building technology. Surviving lengths of chaired double head rail survive at Kyneton, Ravenswood and Bendigo on this railway and include a number of different types of cast iron intermediate and joint chairs with hardwood keys and metal pins. The Ravenswood siding is of special significance for the diversity of chair types and for the sequence of chairs recalling rail lengths known to be associated with construction of the line in 1862. Construction of the Railway Tenders closed on 24 March 1858 with no less than 133 tenders being received. A contract was let to Cornish and Bruce for £3,356,937 to commence work on 1 June 1858 and complete the line by 31 July 1861. Cornish and Bruce made quick early progress with the Melbourne to Sunbury section being officially opened on 13 January 1859. The line was officially opened to Bendigo (Sandhurst) on 20 October 1862 by the Governor of Victoria, Sir Henry Barkly. A great banquet was held for 800 guests and this was followed by a grand ball. The extension of the line to Echuca was a relatively simple matter as that part of the line was across plain country without any significant engineering challenges. Tenders were called for the work in 1863 and the work was completed in 1864 by contractors Collier and Barry Apart from the line contractors, other firms directly involved were J Shire law and Co (sleepers), R Fulton, Langlands Brothers and Co, William Crossley (water supply), B Moreland, Langlands Brothers and Co (platelayers lorries), E Chambers (iron pins, traversers), Miller and McQuinstan (luggage vans and steam engines) and various contractors for building works. Info from Engineers Australia Engineering Heritage Victoria Nomination for Recognition under the Engineering Heritage Australia Heritage Recognition Program for the Goldfields Railways - Melbourne , Bendigo & Echuca Railway Page 25 - .2.9.2 Statement from National Trust of Australia (Victoria) Listing number B5323 for Mt Alexander/Murray Valley Rail Line: Page 69 - Theme 3 https://www.engineersaustralia.org.au/portal/system/files/engineering-heritage-australia/nomination-title/Melbourne_%20Bendigo_Echuca%20Railway%20Nomination.pdf The Melbourne, Mount Alexander and Murray River Railway Company was a railway company in Victoria, Australia. It was established on 8 February 1853 to build a railway from Melbourne to Echuca on the Victorian-NSW border and a branch railway to Williamstown. The company struggled to make any progress and on 23 May 1856, the colonial Government took over the Company and it became part of the newly established Department of Railways, part of the Board of Land and Works. The Department of Railways became Victorian Railways in 1859. Construction of the Bendigo line commenced in 1858, but this private consortium also met with financial difficulties when it was unable to raise sufficient funds, and was bought out by the Victorian colonial government. The design work was then taken over by Captain Andrew Clarke, R. E., Surveyor-General of Victoria, with bridge designs completed by Bryson and O'Hara The contract for the first stage of the line from Footscray to Sandhurst (now Bendigo), was let to Cornish and Bruce for £3,356,937.2s.2d ($6.714 million) with work commencing on 1 June 1858. Completion of the permanent way was to be by 31 July 1861 https://en.wikipedia.org/wiki/Melbourne,_Mount_Alexander_and_Murray_River_Railway_Company Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Victorian Railways : report of the Board of Land and Works November 1862 GP V 1862/63 no. 21 (2.8 MB) https://www.parliament.vic.gov.au/papers/govpub/VPARL1862-63No21.pdfHistoric - Victorian Railways - Double Headed rail Ravenswood Railway Station and Siding Victorian Heritage Database Reports Victorian Heritage Register VHR H1100 Victorian Heritage Register VHR H1786 National Trust VHR H1100 Mount Alexander and Murray River Rail way Line National Trust2 rail lengths of Double Headed Rail made of Iron makers marks : Wilson & Cammell - Dronfield - Steel and 20 joint chairs with metal rail pins Makers mark Wilson & Cammell - Dronfield - Steel (possible date 187? very hard to read ) puffing billy, double headed rail, wilson & cammell - dronfield - steel works, ravenswood station siding, melbourne to echuca rail line, initially known as the melbourne, mt alexander and murray river railway.

Photos shows a Melbourne, MMTB, double-deck bus painted in an all-over livery for the Buy Bonds Let's fill the 3rd Liberty Loan - World War 2 campaign. Has images of Winston Churchill and Australian Prime Minister John Curtain on the side of the bus. The bus is a Leyland TD5c type. In the background is a bus with a James Motors 1925 body, which were remounted on K6 International chassis in 1942 - 1943. Photographed at North Fitzroy Depot. These buses were used to replace the cable trams in Bourke St from October 1940. John Curtain became Prime Minister on 7 October 1941 and died on 5 July 1945. The paint shop record for buses (See Reg Item 126) gives the bus number 220, that it was painted from the 2nd to the 3rd Victory Loan in Jan. 1945 and then painted to green and cream in 8/1945.Yields information about a bus decorated or painted to promote the 3rd World War loan.Set of two photographs of a MMTB double decker bus advertising Buy the World War 2, 3rd Liberty Loan.tramways, buses, mmtb, double deck buses, john curtain, winston churchill, north fitzroy bus depot, world war 2, war loans, leyland, td5c class, central bus garage, bus 220