A bodice belonging to the family of George Ward Cole in the late 1800s. George Ward Cole was an early member of the Victorian Parliament and the family featured prominently in Melbourne Society in their time. They established a substantial home known as “St Ninians” at 10 Miller Street in 1841. The family reportedly entertained Melbourne’s first Royal visitor The Duke Of Edinburgh, Queen Victoria’s second son, at St Ninians in 1867. In later years St Ninians was subsequently subdivided and later demolished. A hand sewn cream silk satin evening bodice from c.1865. This bodice features a very low, wide scooped neckline with a set in sleeve and four small pleats across the head of the shoulder. The elbow length, straight fitted sleeves are trimmed with a pleated ruffle that extends around the arm finishing at the elbow crease at the inside arm and tapering to mid forearm length at the back. The fitted bodice, lined with waxed linen, fastens down the centre front with eight covered buttons of the bodice fabric. The front two panels wrap around the sides of the bodice to meet another series of panels creating a princess line with a delineated central spine. The waist position is just below the natural waist at the sides, tapering to an elongated front covering the belly. From the sides towards the back it curves up to the natural waistline and then down again to a central point. The bodice is decorated with strips of the same fabric, which has been tucked, pleated and padded to create ruching. The ruching edge has a multi coloured thread, suggestive of rosettes, on both sides. In the front of the bodice, a strip runs down the centre front, concealing the buttonholes, and finishing at the elongated point. It then goes up the bodice over the bust line where it meets the neckline. It follows the neckline around the nape of the neck and back down the front over the bust line to the centre front. More strips run around the base of the fitted sleeve near the elbow above the ruffle. The rosette like coloured thread finishes the base of the ruffle. st ninians, george ward cole, bodice, late 1800s, brighton, margaret morrison ward cole

This dress is of uncertain provenance. BHS records indicate that it was owned by Marion Jane Ellen Devlin, nee Stokes (1845-1936), who married Oliver Devlin on 2 April 1877 in Victoria. The dress is believed to have been worn on the Bendigo goldfields circa 1878. It may have been worn as a wedding dress. However, additional documentation discovered in August 2019 suggest that the dress belonged to Margaret Cocking, nee Carr (1850-1936), who married Gustavus Cocking in Bendigo in 1877.A grey-green circa 1878 dress comprising a matching jacket and skirt. The jacket (.1) features a standing collar that gathers to a low point at the throat. This point is concealed behind a bow with raw edges which may not be original. The centre front of the jacket has been secured with nineteen concealed metal hook and button holes. The centre front features fifteen sets of single fabric covered glass buttons secured in a diagonal pattern and appearing as double headed buttons. From the shoulder through the body the jacket is shaped with decorative panels with grey silk detail. Beside these panels shaping into the waist and under the arm are a further two pleats. On the left side waist is a small pocket with decorative flap, grey silk trim and button. The base line of the jacket features a decorative horizontal panel that wraps around the jacket. The sleeve head is small and sits on the natural shoulder line with a slim fitting, curved, full length sleeve. At the base of the sleeve, there is a decorative panel reminiscent of a formal cuff, with a decorative turn back and two buttons. Secured underneath this turn back is a bow like decoration. From the back the jacket features a V shaped decoration, an extension of the front two decorative panels. From the shoulders the jacket is shaped by four panels curving tight into the waist and flaring out again to fullness of the bustle. These seams are also finished with decorative binding. This peplum-like shape features two decorative flaps and six covered buttons. The skirt (.2) is shaped to the waist with pleats and secures on the front left hand side, the original waistband and fastenings have been replaced. The skirt front features a large decorative panel of the same fabric that curves from the front at approximately shin length, upwards towards the back securing underneath the bustle decoration. A second panel, plus a pleated panel finish the hem of the skirt continuing around to the back. At the back the skirt features two deep pleats with a large decorative bow that would sit out over the bustle. The skirt is long featuring a small train at the back. The dress is lined in a brown waxed cotton.wedding dress, 1870s fashion, marion jane ellen stokes, oliver devlin, margaret carr, gustavus cocking, bendigo

A set of laminated A3 sketchbook pages depicting rejected designs for the 1992 Barcelona Olympic Uniforms designed by Wendy Powitt. These designs were rejected during the fabrication process and used at a later time by Doug Pleasance in demonstrations to university/TAFE students.8121.1 - A set of laminated A3 sketchbook pages depicting rejected designs for the 1992 Barcelona Olympic Uniforms designed by Wendy Powitt. The main drawing shows the design for a pair of dark green shorts, a yellow and green striped windcheater with a map of Australia in the centre and a brown belt. 8121.2 - A set of laminated A3 sketchbook pages depicting rejected designs for the 1992 Barcelona Olympic Uniforms designed by Wendy Powitt. The main drawing shows the design for a pair of yellow trousers, a red and orange shirt with blue cuffs and a map of Australia on the right breast pocket. To the right of the main drawing is a detailed drawing of brown leather shoes. 8121.3 - A set of laminated A3 sketchbook pages depicting rejected designs for the 1992 Barcelona Olympic Uniforms designed by Wendy Powitt. The main drawing shows the design for a pair of yellow trousers and a dark green button up shirt. In the top right hand corner there is a smaller depiction of the shirt showing the details. 8121.4 - A set of laminated A3 sketchbook pages depicting rejected designs for the 1992 Barcelona Olympic Uniforms designed by Wendy Powitt. The main drawing shows the design for a pair of yellow trousers and a dark green vest with five buttons in the shape of Australia. To the left of the main design are two smaller images, one showing the details of the pants and the other the detail of the buttons.1992 barcelona olympics, sport, athletes, fashion, design, artwork, drawing, uniform

A set of laminated A3 sketchbook pages depicting designs for the 1992 Barcelona Olympic Women's Opening/Closing Ceremony Uniform designed by Wendy Powitt. On the 1992 Barcelona Olympic Games donor Doug Pleasance wrote- The 1992 Barcelona Olympic Games saw an evolutionary change in designer selection. A Declaration of Interest Form was communicated to over forty potential designers. The task and especially tight timelines that were involved deterred many aspirants, however, there remained eight designers with the potential we were seeking. These eight designers were paid $3,000 per submission and the winning designer, Wendy Powitt, was paid $15,000. For the first time the judging panel included two athletes, one male swimmer and one female basketballer, their influence was pivotal. The Official Uniform was used for both travel and official functions. This included a tailored blazer and trouser/skirt set (all water repellent) by Fletcher Jones in pure olive green faille fabric by Foster Valley, a cotton PE formal shirt by Pelaco, pure wool knitwear by Spangaro, a printed wool tie by TD Noone, wool nylon socks by Holeproof and footwear by Hush Puppy.8122.1 - A laminated A3 sketchbook page depicting a design for the Men's 1992 Barcelona Olympics Australian Official's Uniform. The main drawing shows the design for blue suit pants and blazer with six gold buttons, a yellow shirt and a red, green, yellow and cream striped tie. To the left of the main image are four smaller detail drawings of the belt buckle, gold bottons, blazer and shoes. 8122.2 - A laminated A3 sketchbook page depicting a design for the Women's 1992 Barcelona Olympics Australian Official's Uniform. The main drawing shows the design for a blue elbow length, square necked blazer with gold buttons on both the front of the jacket and sleeves paired with a blue pencil skirt and a red, green, yellow and cream shirt. To the right of the main drawing are four smaller detail drawings showing the pattern for a scarf, the striped shirt, the blazer and the shoes. 1992 barcelona olympics, sport, athletes, fashion, design, artwork, drawing, uniform

Donated by Lewe who is a local member of Beechworth RSL.The social significance is that it represents Lewe’s service and is shared by donating his jacket.Jacket service dress blue grey with insignia rank for leading aircraftsman on the upper sleeves of both arms.Shoulder flashes with the word,Australia , on both shoulders.8 gold buttons in parallel columns of 4.2 buttons one on each breast pockets.Gold airforce eagle on both upper lapels.Label on outside of inside right breast pocketCloth label 75mm wide by 80mm long. Faint grey no,s - “12 “at top left corner”,8051” at right corner and “12” on bottom left corner. Ink wording as follows: “KENTISH CLOTHES “ on top first line of label,”S.A./1972/Gov,t or Defence arrow sign/8405-66-037- 4802/size 39 REGULAR/MATCHING TROUSERS/35 WAIST/SERVICE NO” with dotted line for wearer to write on.This is blank. “NAME” with dotted line also blank.” DRY CLEAN ONLY/REPRESS WITH DAMP CLOTH/DO NOT SIRO-SET” on bottom of wording.jacket, service, dress

The garment was a sealed sample 26 feb 1962. It is unknown when the dress was replaced. It is a representative example of this type of uniform in the period.The dress is in excellent condition.Light green,short sleeves.410mm shoulder to shoulder.1018mm top of collar to bottom of dress.320 mm wide waist.25mm sleeve from shoulder top to sleeve end. Sleeve cuff 4 cm wide.Two pockets on front, each set 12 cmm below waist and 9 mm from edge of centre opening.bottom of pocket is 10 cm from edge of centre opening.The dress opens at front with 8 button holes (24mm) openings,with a neck button loop(2cm). Two epaulettes 5cmm x 11 cm(long). The pockets have a sewn flap 2cm long from pocket top and 5 cm (at apex) from top of pocket.Two loops (5cm high) at each side of dress.A loop for hanging dress is inside collar at rear.Three press studs at front to fasten dress.Attached certificate in plastic seal. “Department of Army - inspection service/ SFC 8.3.13. (June 1958). Sealed sample/ sealed pattern no class 8415 article/CLO 1489 DRESS WOMEN’S indoor uniform,short/sleeves.RAANC,S55./ the supply is not to differ from this sale sample except in such/ respects as may shown on back thereof./Approved 26.2.1962/ for Director of inspection” On reverse of sealed tag is: “ measurements shall be as specified.Buttons/RAANC Line 30 (fronts) . Buttons RAANC LINE 26/(SHOULDER STRAPS).”dress, women’s, raanc, short sleeve, uniform

The item is a representative example of previously standard issue uniform and is in excellent condition. As a set alongside 0040.2, the uniform has aesthetic significance in its design, incorporating the Disruptive Pattern style of camouflage which has its roots in the 1980s and continues to be adapted into uniform design by the Defence Force.Field shirt in disruptive pattern colours of green, khaki and browns. Long sleeve with five buttons up the front, two chest pockets with button-down flap pockets. Both sleeves are reinforced from the elbow down to the cuff; cuffs are fastened with a single plastic button. Above the right chest pocket is a patch with embroidered inscription in black thread on disruptive pattern backing. Shirt also features plain epaulette's on both shoulders, fastened by plastic button. Manufacturer's label on interior reads "ADI P/L/VICTORIA/1989/[broad arrow]/8415.66.130.0033/SIZE. 100R/NAME/SERVICE NO./MACHINE WASHABLE/DRIP DRY ONLY/DO NOT IRON/DO NOT STARCH/DO NOT BLEACH" Patch above chest pocket reads "PARKER"camouflage, uniform, australian defence force, disruptive pattern

The item is a representative example of previously standard issue uniform and is in excellent condition. As a set alongside 0040.1, the uniform has aesthetic significance in its design, incorporating the Disruptive Pattern style of camouflage which has its roots in the 1980s and continues to be adapted into uniform design by the Defence Force.Field trousers in disruptive pattern colours of green, khaki and browns. Two pockets on either hip, two pockets on both thighs fastened by two plastic buttons and one pocket on the back right side, fastened by a single button. Five large belt loops encircle waist, held in place with a dark green khaki button. Trousers fastened with a zipper and button, and adjustable tabs around hip bones. camouflage, uniform, australian defence force, disruptive pattern

Distributed to nurses who took part in campaigning for improved wages and working conditions in the 1980s, particularly those involved in the historic 1986 Victorian 50-day nurses strike. In October 1986, Victorian nurses began their longest strike after the failure of repeated talks with the health minister David White who was committed to reducing the classification and pay of almost half of Victoria’s nurses. Skeleton staff were left in the wards while picket lines, tents and caravans were set up outside hospitals in both metropolitan and regional Victoria. After 50 days of industrial action, Victorian nurses voted to return to work on 20 December 1986. The Royal Australian Nursing Federation (RANF) became the Australian Nursing Federation in 1989, and the strike concluded in December 1986, suggesting this badge was produced sometime between 1987 and 1989.Circular red and white plastic badge. Silver metal, plastic-coated, with safety pin fastener adhered to back. Badge printed with 'I FOUGHT NURSES STRIKE 1986' and 'R.A.N.F. [Royal Australian Nursing Federation] Vic. [Victorian] Branch'.nursing, nurses, industrial action, strike action, unionism, badges, buttons, pins, campaigning, 1986 victorian nurses strike, trade unions, labour history, royal australian nursing federation

Button distributed to and worn by Australian Nursing Federation (ANF) members and staff as part of a 2006 campaign protesting the controversial 'WorkChoices' federal industrial relations laws that were introduced by the Liberal John Howard government in 2005-2007. These laws saw the weakening of unfair dismissal laws, giving employers significantly more powers to strip existing rights and wages away. The laws were repealed following the election of an opposition Labor government in 2007 under Kevin Rudd. The 'Howard Target Nurses' campaign was featured in ANF Victorian Branch newsletters around late 2006. During this period, a number of enterprising bargaining agreements were set to soon expire, leaving nurses vulnerable to have rights stripped away under the new IR legislation. A large campaign began, with rallies across the state of Victoria. The August 2006 Branch newsletter featured images of the Tandberg 'Howard targets nurses' design on placards, shirts and badges worn by nurses at these rallies. The illustration by The Age cartoonist Ron Tandberg made reference to John Howard's involvement in wars in the Middle East throughout the early 2000s, and linked this to the 'war' on unions and worker rights.Circular yellow, red and white badge. Silver metal, plastic-coated, with safety pin fastener adhered to back. Badge printed with a blue and white ANF [Australian Nursing Federation] logo, the black text '[then-Prime Minister John] Howard targets nurses' and a Ron Tandberg cartoon of a nurse with a 'sniper target' overlay.nursing, nurses, protest, campaign, activism, activists, unions, unionism, buttons, badges, pins, campaigning, john howard, ron tandberg, labour history, australian nursing federation, workchoices, workplace relations, industrial relations

Button distributed to and worn by Australian Nursing Federation members campaigning against changes to nurses awards. The minimum wages and conditions an employee is entitled to are set out in awards (also known as modern awards). Awards don’t apply when an employer has an enterprise agreement or other registered agreement and the employee is covered by it. The Royal Australian Nursing Federation became the Australian Nursing Federation (ANF) in 1989, and then became the Australian Nursing and Midwifery Federation in 2013, suggesting this badge is from the 1990s or early 2000s.Circular white and blue plastic badge. Silver metal, plastic-coated, with safety pin fastener adhered to back. Badge printed with 'hands off nurses' awards!' and 'AUSTRALIAN NURSING FEDERATION'.nurses, nursing, unionism, badges, buttons, pins, trade unions, labour history, australian nursing federation, wages, working conditions, employment

Written by hand in blue ink on a small piece of paper - Ribbon is pure gold thread. The buttons and stars are rolled gold. They were all brought from Germany by Auntie Hilda - made in her cousin's factory who supplied these for the German Army, (1st World War).A set of 1st World War German Military Uniform badges (10 star pins) and buttons (5) with a shank on the back made of rolled gold and a piece of ribbon made of pure gold thread. 3 buttons are smaller than the other two and all have engraving and military insignia which is difficult to read on the front and the back of each. One star is bigger than the other 9 and all have 5 points and lines on each point. They have a pin on the back. The 5 buttons have an insignia on the front with a key and other markings. German writing is around the edges and back.war, military badges, world war 1, military buttons, military decorations, gold

Two piece brassiere set, from a bride's trousseau (1900)A cream two piece brassiere set. Cotton bustier with lace trim, bone/plastic stiffeners, lace up cord and cotton ties. Camisole with lace insertions, and mother of pearl buttons. brassieres, camisoles, underwear

1. A scarlet woollen jacket with blue collar. It has blue cuffs. On the collars are badges of the RAASC. On the epaulettes are a Captain's set of pips (3). 2. Vest. Blue woollen outer, polyester inner. Two small pockets on front with four small buttons. 3. Shirt, cream/white colour. 7 pearl buttons. It has lighter vertical stripes every 20mm. 4. Bow Tie - black,1. Written in jacket is: 392063 Butterworth. 2. Written in the vest is: 392063 Butterworth and .........Jardine 11119.post ww2, officers mess dress, passchendaele barracks trust

This wedding dress was made & worn by Marjorie Gertrude Schneider, elder daughter of Mr & Mrs A. A. Schneider, of Lorquon, married Harold Francis Rohde, youngest son of Mr & Mrs J. B. Rohde, of Gerang, at St. Paul's Lutheran Church, Woorak, March 2nd, 1949.The dress was handmade by the bride, Marjorie Schneider.A charming frock of ivory cloque, inset with a yoke of beige lace with scalloped edges, cut on very flattering lines. The bodice, fitting perfectly to the waist and the back having a row of buttons, was ornamented as the shoulder with a diamante clip which had adorned her mother's wedding gown. The full skirt was draped softly from the waist, & extended into a long train at the back. The halo of orange blossom, which held the veil in place, set off to perfection the exquisite bride. She carried a shower bouquet of creamy white tiger lilies, gardenias, dahlias, gladioli and rose buds, & added to this was several horseshoes given by friends.schneider, rohde, woorak, st paul's lutheran church, gerang, lorquon, wedding

BHS CollectionBlack linen-like dress. Peaked collar. Front opening, fastened with five press studs. Seventeen covered buttons decorate the front opening from neck to waistline. A three point five cm wide band marks the waistline, caught at eight points.Skirt has four panels of fabric. Long set-in sleeves have a turn-back cuff, decorated with three covered buttons.

Set of 17 large and 7 small TB uniform clothing buttons. Large Button about 23 diameter, with TB crest, with backing piece and lug for sewing on rear. Nickel plated silver? Most have two holes in the rear as well. All but one made by Stokes and Sons, Victoria. One large button made by K. G. Luke A/Asia. Small button, approx. 16 diameter, as above, with or without holes in the rear. One button by K. G. Luke A/Asia, four by Stokes and Sons, Victoria and the other two difficult to determine due to dirt etc. Donated by Peter Winspur, from his surplus collection - Nov. 2006 tram, trams, mmtb, melbourne tramways, uniforms, buttons

BHS CollectionPhotograph of four Hanro models: Black and white photo of four ladies modelling Hanro dresses.. Three ladies are wearing Hanro dresses and the fourth is in a tailored suit .On the left the dress is of light material and has short sleeves, padded shoulders, high neck with three darts either side at the next and four buttons down the centre. The dress has darts at the waist and is drawn in with a belt. Second lady from the left is wearing a long sleeve dress with padded shoulders set in sleeves, and gathered at the cuff and secured with a button. The bodice is V necked with a collar, has gathering at the shoulders and is buttoned up with two buttons down the centre, darts under the bust line and a belt is at the waist. The third lady is in a dark suit with a long sleeved tailored jacket with padded shoulders, V necked with a collar and five buttons down the centre. Pockets either side are trimmed with buttons. The suit has a straight skirt. The lady to the right is in a light coloured dress with short set in sleeves and a peter pan collar. At the top half of the bodice the dress has vertical pin tucking with five buttons down the centre. The waist has darts at the bust line and the skirt is of a gored style, there is a belt at the waist. The hem line are all below the knee and are all wearing high heals. The ladies are standing in front of a wall of wood panelling. On the back written in pencil is *Joyce, Yvonne and Clarice. Copyright Bendigo Advertiser. Bendigo Advertiser Photographic Service. For re-order Quote CK242. Box 116ABendigo advertiser Photographic Servicephotograph, person, hanro, hanro. bendigo advertiser photographic service

The Sanyo ‘Sensor Touch’ television was assembled in Wodonga. Sanyo was one of the international companies that set up business in Wodonga in the 1970s as part of the decentralisation of industry. It continued operation into the 1980s. The Sanyo Australia Pty. Ltd. factory in Wodonga opened in 1974 with 35 staff and production peaked in 1976-1977 when it employed 360 people. In the first ten years 350,000 televisions were assembled from Japanese parts, however by 1984 the number of staff had reduced to 112 and the factory closed in 1987. All Sanyo televisions were then imported from Japan.The Sanyo ‘Sensor Touch’ television has local, state and national significance as it is thought to have been assembled in Sanyo Australia's factory in Wodonga. Sanyo was one of the international companies that set up business in Wodonga as part of the decentralisation of industry in Australia in the 1970s-1980s.Large Sanyo 'Sensor Touch' colour television with a faux wooden veneer frame and exterior. 53 cm or 20 inch screen (diagonal measurement)."SANYO / Sensor Touch / Telecolor" on the proper left side panel. "9 / 2 / 7 /28 /10 / 3 / 1 / 0 / AV" for the channels on the proper left panel. "COLOUR / BRIGHT / ONE / BUTTON / COLOUR / PULL-ON / VOLUME" under various buttons on the proper left panel. sanyo, colour televisions, televisions, sensor touch television, wodonga, sanyo australia pty. ltd.

Social The pants are of a woollen material with braided stripes down each side from top of waistline to bottom of cuff. The pockets are of cotton fabric. There is a fly opening at the front with three buttons and a metal hook and catch at the waist. There is a tightening band affixed to each side of the waist with a pull through metal catch. Six buttons are affixed to the inside of the waistband to allow for the attachment of braces. The waistline is satin and hessian lined. There are pockets on the left front and back and deep side pockets on each side. This is a spare set of trousers for the Tails suit in box 1010.clothing, tails suit trousers

Set of four types of coat buttons: 1 - MMTB button or Badge - brass - made by Buttons of Birmingham UK - approx. 25mm dia. 2 - MT - (Cable tram) button - brass - made by Stokes and Sons Melbourne - approx. 25mm dia. (this is to be clarified as at 24/6/2018, though see detailed image of a conductor in uniform - Reg Item 1961.) 3 - Dept of Govt Transport - Tasmania? - has a crown in the centre, - nickel silver with brass back and formed loop to sew onto a jacket or be pinned. 4 - Two badges both with the Islamic symbol and star (5 points) - brass, one marked "Tramways" and the other "Tramways Caire" - Cairo. The first badge made by "A. Meyer & Co. Wien".trams, tramways, melbourne tramways, uniforms, buttons, cairo, tasmania, cable trams

Set of seven nickel silver MMTB Coat buttons and two brass. Buttons (approx. 22mm dia) are made by Stokes and Sons Melbourne. The badge backing piece is nickel silver or brass. They are fitted with a lug for sewing onto a jacket and have name of manufacturer stamped on rear part. Three of the Stokes and Sons badges have one two small hole,trams, tramways, melbourne tramways, uniforms, buttons, mmtb

Set of eight small silver MMTB Coat buttons with brass backs and hooks. Five of the buttons (approx. 16mm dia) are made by Stokes and Sons Melbourne and three by Buttons of Birmingham UK One of the button has a metal clip in the rear. Four large, one brass finished and three nickel silver buttons, 23mm dia. with brass backs and hooks. Two by Stokes and Sons and two by Buttons of Birmingham.trams, tramways, melbourne tramways, uniforms, buttons, mmtb

Set of four nickel silver MMTB Coat buttons with brass backs and a sewing lug or ring on the rear. All of the items are made by Buttons of Birmingham - name stamped into the rear section. Two large - 22mm diameter and two 15mm dia. Received in a small envelope with information that they were issued by the Interim Tramway Board. The design appears to be similar or identical to that of the MMTBIn a small manila envelope "2 large and 2 small buttons issued by the (interim) Tramways Board on their uniforms of its cable tram crews"trams, tramways, melbourne tramways, uniforms, buttons, tramway board, cable trams

Set of six destination indicator equipment that was fitted to Z, Z3 and B class trams. .1 - dot matrix type destination sign fitted to the side of a B class tram - set at Preston Depot - serial number 232636 - Luminator type, back cover loose, 180H x 1300W x 100D. See images 3704i1a to e. .2 - dot matrix type route number fitted to the front of a tram, type fitted to B2 class tram, set at 86D, serial number 273644 - Luminator type, marked "163 No", 240H x 350W x 135D. See images 3704i2a to d. .3 - flipper type, side destination type, marked "ex 53" (Z class tram), made in Italy by Boselli has yellow label 37/702S, serial number 40A1603, set to St Kilda Beach and stamped 136 on one flange. 120H x 330W x 165D. See images 3704i3a to c .4 - flipper type, destination box, with markings "B'Wick Flaps", with labels "New" "Universal A flaps" made in Italy by Boselli, serial number 40A6623, set to St Kilda Junc". 210H x 1000W x 1900. See images 3704i4a to d. .5 - flap from an above type box, half of "Richmond" and "South Melb Depot", 970W x 80H. See images 3704i5a to b .6 - controller box, marked "No. 105" on rear, serial number 202311 Luminator, numeric pad, illuminated display and five control buttons made by gulton Luminator division fitted to a B2 tram. See images 3704i6a to b .7 - dot matrix destination sign fitted to the front of a B2 class tram, set to "Not in Service", Serial number 502626 Luminator, 220H x 1300W x 165D, See images 3704i7a to e. Source of items 3 and 4 name based on drawings held by the Museum for the destination signs fitted to Z class trams. Refer to drawing R11-982 as an example. Luminator made by Luminator Technology Group Texas - see https://www.ltgglobal.com/ access 12/7/2019. Imagetrams, tramways, destination indicators, z3 class, transport equipment, z class, b class

Set of six large gold Coat button and four small cap buttons. Has an eyelet or ring fixed to the back and stamped either "Stokes and Sons Victoria" or "Stokes and Sons Australia" 8 additional buttons added from Ron Scholten 11-6-2022.trams, tramways, buttons, mmtb, uniforms

BHS CollectionHanro Stand Along Counter Display: The picture is of three people at a BBQ scene. The man is chopping kindling and is wearing a yellow V neck lone sleeve jumper that has a vertical pattern. One lady is holding a sausage in a fork and is wearing a mauve twin set. The cardigan is V necked and has four buttons, lone sleeves with cuffs. The jumper has a high neck with a small collar. The twin set has an over all uniform pattern. The second lady is toasting bread on a long fork and is wearing a green jumper with long sleeves and high neck, it is knitted in a ribbed design. At the bottom is rectangular white area with Hanro knitwear printed in red and black ink. At the very bottom is *The Quality is a Proud Tradition* The front has water marks at the bottom. The back is green tin with a brown card piece for a stand and two metal holes with string for hanging if needed. Bellesini is hand written on a small white sticker. Box 116Aphoto, person, hanro, hanro

BHS CollectionWhite cotton long sleeved ladies undershirt.. Front opening with four buttons and buttonholes. RHS of opening trimmed with double sided broderie anglaise lace. On either side of front opening is a vertical insert of broderie anglaise lace with three vertical pintucks on either side, Widens at hipline. Set in sleeves trimmed with broderie anglaise lace and pintucks at wrist.costume, female, ladies undershirt

Set of five nickel silver MMTB Coat buttons. Three of the buttons (approx. 22mm dia) are made by Stokes and Sons Melbourne and the two (approx. 25mm dia) are made by K. G. Luke Australasia. The badge backing piece is brass. It is fitted with a lug for sewing onto a jacket and have name of manufacturer stamped on rear part. The Stokes and Sons badges are two small holes in the rear, while the Luke's badges do not.trams, tramways, melbourne tramways, uniforms, buttons, mmtb

Northern District School of Nursing nurse's base uniform 1950s - 70s.Blue cotton uniform worn beneath white apron. The uniform is open at the front with eight button holes in right placket for buttons and shanks to attach. There are corresponding buttonholes on left side for closing, a small pocket at top left and a pocket at RHS of skirt. There is a small buttonhole at back of neck to attach white collar and white cuffs are attached to sleeves with two white buttons. The front has gathering from below the shoulders and the back top has an inverted pleat at centre. There is a white belt with two white buttons at one end attached with shanks and three sets of two button holes at the other end for closing. There is a white cap with frill and a line of blue braid above the frill indicating a third year trainee. There is a white apron with four buttonholes at the waist for closing and for the two shoulder straps.A white tag with Joy Lewis' in red is attached to all items. N.T.S in black marking pen is printed on back hem of neck. There are many black marking pen numbers and letters on the cap: NTS, BAS, 574, BH5, 530, 574 The apron has the name Lewis and figures 638 in black marking pen on inside of waist.nurses uniform, northern district school of nursing