As used by recreational shooters and the safe carriage of firearms manufactured by Holden and FrostItem holds social significance manufactured by Holden and FrostEnclosed leather gun case leather strap on top handle and shoulder strapG.B.L.leather, gun case

Hand carry gun case manufactured by Holden and Frost C1900Manufactured an sold by Holden and FrostLeather gun case with hand hold strap and buckled top coverleather, hunting, gun case

A blue coloured cardboard cover with black information of the front. Below the Australian Coat of Arms Insignia are the details of the manual. There are two metal staples down the spine of the manual. Top right corner is the name Lloyd. Top left hand corner there is a name crossed out und under this reads 43 RSAR. In a light texta reads B Coy C.O. Boxaustralia - armed forces - service manuals, infantry training, infantry platoon weapons, sub-machine gun 9mm f1, b coy, 43 rsar

A blue coloured cardboard coer with black information. top right hand side reads DSN 7610-66041-6416. There are two punch holes down the left hand side.There i a folded faded document which is held together by a rusty metal staple inside the booklet.australia - armed forces - service manuals, infantry platoon weapons, m 60 machine gun 7.62

317 p. : ill. ; pale blue cover, images of native Americans holding guns on front cover, frontiersman holding gun on spine.fictionAdventure story for boys set in the American frontier.children's fiction, westerns, american frontier

A blue coloured cardboard cover which has signs of water damage on it and it is slightly buckled. Under the Australian Army Insignia is the niformation in black ink. Top right hand corner reads 7610-66-107-6806. There are two punch holes down the left hand side.There is a name in blue ink which I think reads Sgt Raynant, D. F. The description of the cover is different to the one inside of the cover which reads: Australian Army: Manual of Land Warfare. Part Two Corps Doctrine Infantry Training Volume 4 Infantry Small Arms. Pamphlet No 3 The Sub Machine Gun 0 mm F1 (All Corps) 1983australia - armed forces - service manuals, land warfare, infantry training, sub machine gun 9mm f1, corps doctrine, infantry small arms

1941 40mm 2-pounder brass anti tank gun shell case made into a vase with 5 splayed points at top the casing with the collar insignia badge on front.Insignia - Australian Commonwealth Military Forces (collar badge). Outer edge under shell - 1941 LOT 110 RM/C 2PR No1. Inner area under shell - 1941 113 11-41anti-tank, gun shell, trench art, 1941, vase

1941 40mm 2-pounder brass anti tank gun shell case made into a vase with 5 splayed points at top the casing with the collar insignia badge on front.Insignia - Australian Commonwealth Military Forces (collar badge). Outer edge under shell - 1941 LOT 113 RM/C 2PR No2 Inner area under shell - 1941 110 11-41 No/2 MK1gun shell, anti-tank, trench art, 1941, vase

Standard issue item as used by Australian servicemen during the conflict in Vietnam. A plotting board is a mechanical device used as part of a firing control system to track the observed course of a target, project its future position, and derive the azimuth (or direction) and range needed to direct the fire of the guns of a battery to hit that target.White plastic base. A circle marked with grid lines is printed on the base and a vernier for finding azimuth deflections in along top edge. Rotating disc pivots at the centre atop the disc with distances measured radially form 0 at the centre to 3400 metres around the rim range form 0-6400 metres. A scale pivoted at the centre assists in reading distances.Nth and Sth top and bottom on rotating disc. East and West in centre distances in black on outer of disc. Distances in green on inner North, South, East, West. Varn W left bottom of disc. varn E on right bottom of disc.plotting board, m16

A cream coloured cardboard cover with black details on the front.At the top of the manual reads TM 9-1005-300-34 Department of the Army Technical Manual. There are three punch holes and two metal staples down the left hand side. the manual is kept in a plastic cover for protectionunited states - armed forces - service manuals, machine gun mount m66, installation kit

Postcard Album of Blanche Sly. Postcards stored in Folder 81 (49 postcards). 1403.1 - 1403.28 Grey linen look cover with picture of a small sailing boat pasted centre front pf cover. Partly torn sticker on lower LH corner. Blanche Victoria SLY Born: 11 Oct 1890, daughter of William and Hannah Sly Address: 1913; Loddon Vale Address: 1980; 100 Barnard Street Bendigo Died: Bendigo 12 June 1982, buried Bendigo G3 William Sly: Born: 1856 at Smythesdale, Victoria Married in Victoria in 1887; Hannah Theilman Died: Bendigo 1937, buried Bendigo G1 Hannah Sly Nee Theilman Born: 1866 Married in Victoria in 1887; William Sly Died: Bendigo 1948, buried Bendigo G3 See additional Research .Postcard Album of Blanche Sly containing 49 postcards. See 1403 B&W photo of a heavy Howitzer Gun being fired by a section of 5 gunners. Camouflage net over the top. Caption beneath reads - Firing a heavy Howitzer in France Daily Mail war pictures no. 32 Addressee - not given Sender - not given Undatedpostcard, collector, blanche sly

Used for WWIIUsed for WWIILight brown coloured stitched leather case with rounded ends for housing a Clinometer, brass and steel, for a Vickers machine gun. The rear of the case has two short leather straps and steel buckles, attached with a metal rivet. The strap has 6 holes for attachment to the buckle. The front of the case has a steel buckle attached by a small leather strap attached by stitching. The top lid of the case is missing a leather strap.SIGHT CLINOMETER SPARE Q.F 13 & 18 PR. M. H. & Co. R.C.D. IL 1942

A comprehensive thick catalogue book: D.W. Chandler General Hardware Ltd. Catalogue established 1876 which has a very decorative busy front cover with green, burgundy and cream colours for the title, full details of the contents, address, Registered Trademark, phone numbers and more. It is bound on the spine with red tape, 27.5 Inside on the left front end paper are details about Chandler's mail orders, a map of the Melbourne city location and addresses for Melbourne, Fitzroy and country cities. Opposite is a NOTICE page, explaining prices were current at the time of issue, (October 1937) with several altered prices since printing. Pp. 180 with four thin blue paper Order Forms at the back; two which have been filled in and two with a child's scribble on them. There is a comprehensive four page Index at the back. Hundreds of black and white drawings of hardware items and general life of the times are included throughout. Inserted in the catalogue are four dried plants or flowers, a small leaflet which shows illustrations and information about "Rega" spraying nozzles with diagrams and handwritten prices. A leaflet of a Parts Price List for Stewart No.1 Clipping machine and clipping heads. A copy of a D. W. Chandler Ltd Fitzroy order dated 12 March 1937 for "Ringlock" Fencing. On page 146 is a light blue thin paper Note for P146 about models of Churchill's and Jeffery's guns. Attached to this paper with cellotape is a typed copy dated 10/11/37 for an order for Square Iron Tanks to be delivered by rail. The back cover has advertising for "Perfect" Welded Fencing from Chandler's hardware stores. There is a manufactured hole by the publisher in the top left hand corner to hang it for future reference.non-fictionA comprehensive 1937 catalogue of general hardware for household and farm use for buyers to order in Melbourne and rural cities in Australia. The company was established in 1876. This is the 49th issue. social history, australian history, history, hardware, catalogues, objects, tools

A blue coloured cardboard cover with black information on the front of the cover. There is the Australian Army Insignia and under this are the details of the booklet. Top right hand corner reads DSN 7610-66-041-6416. There are two punch holes down the left hand side and the booklet is covered with a plastic cover.australia - armed forces - service manuals, infantry training, m 60 machine gun 7.62

A blue coloured cardboard cover with black information on the front of the cover. There is the Australian Army Insignia and under this are the details of the booklet. Top right hand corner reads DSN 7610-66-041-6416. There are two punch holes down the left hand side and the booklet. Part of the spine of the booklet is torn. australia - armed forces - service manuals, infantry training, m 60 machine gun 7.62

Denis Gibbons (1937 – 2011) Trained with the Australian Army, before travelling to Vietnam in January 1966, Denis stayed with the 1st Australian Task Force in Nui Dat working as a photographer. For almost five years Gibbons toured with nine Australian infantry battalions, posting compelling war images from within many combat zones before being flown out in late November 1970 after sustaining injuries. The images held within the National Vietnam Veterans Museum make up the Gibbons Collection. A black and white photograph of 131st Divisional Locating Battery, 1st Field Regt RAA. Gnr Cahill mans an M60 machine gun while his number two is at the ready with his SLR rifle, in one of the units' sandbagged bunkers, in the battery location on top of Nui Dat Hill, 1AFT BAse, (circa March 1967)photograph, 131st locating battery, 1st field regt, raa, nui dat, gibbons collection catalogue, gnr cahill, m60 machine gun, slr, nui dat hill, 1 aft base, denis gibbons

Item in the collection of "Frederick Baxter MC". Refer Cat No. 4219 for his service history.White porcelain model of soldier firing a Vickers Machine gun. On front the shield of the town of Welwyn. Shield has image of red deer and at top a picture of a cathedral. Base has gold rim around edge.On bottom is written "Model of Tommy and His Machine Gun RTN7657214" On shield on front "WELWYN".baxter collection, souvenir, ceramic model, baxter mc

Booklet of Humorous tales of the Diggers belonging to Harry Trudgen -Service Number - VX132215 : Date of birth - 15 May 1923 : Place of birth - ALBURY NSW : Enlisted - IN THE FIELD QLD (records not available) Next of Kin Father - TRUDGEN John Henry Service Number - 9550 : Place of Birth - Beechworth VIC : Enlisted in 1915 - Driver with the 13th FAB - received gun shot wound to hand and returned to Australia in 1919.Beige paper booklet with picture of Australian Flag and three Servicemen on cover with writing in red above and in blue below.Sons of Anzac Humorous Tales of the Diggers Harry Trudgen 1914-18 handwritten top right hand corneranzac, humorous tales of diggers

Shell casings were used to hold the propellant charge and projectile in artillery guns.An example of a shell casing used in artillery guns.Cylindrical shaped copper shell case with tapered top. Flat base with small lip. Inside base appears bright silver centre and features a small screw. Base underside: Stamped with a circle, inside of circle appears further markings but they are indistinguishable.war, defence force, ammunition

This box held two rounds of 76mm Arm DC. These rounds were used in guns mounted on either Saladin Armoured cars, or, Fire Support Vehicle A.P.C. M113 in Vietnam. They used the L17A3 in practise. The projectile was filled with a mixture of explosives ROX and TNT for better blast effect. The rounds came assembled as quick firing in a cardboard tube, 2 tubes to a crate (Box). These rounds were packed at Saint Mary's, NSW, December 1968, Data supplied by the R.A.A.H.C. Part of the collection of William (Bill) Thomason. Refer Cat No 4136P for more items.This is a wooden box. It has rope handles at each end. It has 2 metal hinges and it has a metal closing clip. It has 2 pieces of timber affixed across the top. The box is painted drab olive. The box is made out of five ply. Inside is empty and there are two nylon straps fixed to front wall.On left end (stamped) "PRIM 15/5 24 MY-9-88" Top - "76mm H.E" Right end - "26B - MY 12-88 25.4 Kg 0.03 M3" Front - "2 Cart 76mm HE/T 1 24A3 F20 L17. 2 CNTR RDX/TNT 26B- MY-12-88T FU2 L17A4 70MY-12-88"ammunition storage, equipment

This meticulously hand crafted ship model is one of the most intricate and challenging projects for a ship modeller to create. Jim Williams took up the challenge, choosing to make all of the components by hand, following a plan of the ship rather than purchasing a pre-made kit. He even made his own tools specifically for working with this model. The “Sovereign of the Seas” 1637-1697 - The magnificent ship “Sovereign of the Seas” was ordered by Charles I of England, who desired a giant Great Ship to be built. It was built by Peter Pett under the guidance of his father Phineas, the King's master shipwright, and launched with 102-guns at Woolwich Dockyard on 13th October 1637, as the Navy’s second three-decker first-rate ship. It was the most extravagantly decorated warship in the Royal Navy, bought with the help of a special 'Ship Money' tax imposed by the King. Soon afterwards the ship was remodelled and cut down to a safer and faster ship. Over the ship’s lifetime it was renamed “Commonwealth”, then in 1650 it became simply “Sovereign” then again after a rebuild in 1660 it was named “Royal Sovereign”. By 1642 the ship’s armament had been reduced to 90 guns. In 1651 Sovereign was made more manoeuvrable by reducing the upper works. It served throughout the wars of the Commonwealth and became the flagship of General Robert Blake. It was involved in all of the great English naval conflicts fought against the United Provinces and France and was referred to as 'The Golden Devil' by the Dutch. By 1660 the armament was changed attain to 100 guns. After the English Restoration, it was rebuilt as a first-rate ship of the line, with flatter gun decks and 100 guns, and most of the carvings were removed. During the First Anglo-Dutch War, in a secret session on 21 October 1652, the States-General of the Netherlands announced reward money for the crews of fire ships that succeeded in destroying enemy vessels; the Sovereign was singled out with an extra prize of 3000 guilders to sink or ruin it. Although repeatedly occupied by the Dutch, the Sovereign was retaken every time by the British and remained in service for nearly sixty years as the best ship in the English fleet. The Sovereign was in regular service during the three Anglo-Dutch Wars, surviving the Raid on the Medway in 1667. After a second rebuild in 1685 the Sovereign was relaunched as a first-rate ship of 100 guns, before taking part in the outset of the War of the Grand Alliance against Louis XIV of France, venturing into the Irish Sea, and later participating in the Battle of Beachy Head in 1690 and the Battle of La Hougue. At this time she was more than fifty years old. It was the first ship in history to fly ‘royals’ above the topgallant sails and a top gallant sail on the jigger-mast. The Sovereign eventually became leaky and defective with age and was laid up at Chatham when, on 27th January 1697, the famous ship caught fire, burning to the waterline. Jim Williams, the model’s maker - Jim (James Bernard) Williams was born in 1888 at The Forth in Scotland. He lived in Tasmania for some time and enlisted to fight in France in WW1. After the war he moved to Warrnambool, Victoria, where he worked at the Cramond & Dickson clothing store until the Great Depression in the 1930’s. He was later employed at Fletcher Jones Menswear, where he worked for 27 years until just before his death in 1959. Jim was a passionate ship model builder. He worked on his model ships between 1930 and 1955, including The Endeavour and The Sovereign of the Seas, which was one of the most intricate historic ship models to build. He had a table set up in a bay window and worked on them on and off using a jeweller's eye glass on the finer pieces. Jim’s long-time employer, Fletcher Jones, knew of Jim’s hobby and skill as a ship model builder and requested Jim to describe the model, Sovereign of the Seas, with the view of putting it on display. When the model was finished there was a full article and photo in The Standard newspaper. Jim described his work on the ship mode “Sovereign of the Seas” in correspondence to his then employer, Fletcher Jones. The document gives us an insight into his skill, patience, and regard for replicating the details of the original ship. Some of the details are: "In making the model the time taken to make certain items might be of interest. For instance "The Great Lantern" on the stern, four weeks, a similar time for the figurehead of St George & the Dragon. "The lower shrouds three to each side about six weeks & the rigging as whole several months. There are nearly 300 blocks and pulleys ranging from nearly 1 / 16 inch in diameter. Dead eyes were bored with 3 to 5 holes. To do this needles of different sizes, set in handles & ground to wedge ends were used. Glass cut and ground to shape were used windows. All gun-port covers (74) hinged. "All guns and anchors made of wood. Nothing for the model was purchased ready-made; everything hand made." Jim’s family donated the ship model along with many associated tools, accessories and papers. The model represents the Sovereign of the Seas. The Royal Navy ship of the line launched in 1637 has a significant British maritime heritage. These days the Sovereign of the Seas still remains one of the most intricate historic ship models to build, representing to the model enthusiast a true challenge to the art of model shipbuilding. The model of Sovereign of the Seas in Flagstaff Hill's collection is an exemplary example of a ship model built and hand crafted from a plan with the making of every item on the model, not a model kit with prefabricated parts. It was made by a local Warrnambool man Jim Williams as a leisure activity in the mid 20th century. The hobby and craft of ship model making has resulted in visual representations of the changes in maritime technology and advances in world-wide navigation. Ship model of HMS Sovereign of the Seas, a 17th century British warship. The handmade model is in wooden framed, airtight glass case. All components were hand crafted. Many of the tools used were made by the model maker, Jim Williams. An inscribed plaque is within the case. Inscribed on plaque "SOVEREIGN OF THE SEAS / 102 GUNS - 1634"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, model ship, vessel sovereign of the seas, jim williams, james bernard williams, the forth tasmania, freda williams, heather williams, phyllis bowditch, fletcher jones staff 1936, 17th century sailing ship, cramond and dickson, sovereign of the seas, royal sovereign, sovereign, charles 1, ship model

These shell cases were donated along with other items from the St Nicholas' Mission to Seamen's Church at 139 Nelson Place, Williamstown, Victoria. The Church was operated by the Mission to Seamen organisation. The symbol of the broad arrow on the base of the shell case signifies that it was owned by the Australian Army. The dates of the shell cases - 1940 and 1941 - link the shell cases with World War II. Both cases' headstamps have "N", which could indicate that they were made for use by the Navy. Shell Case 1298.01: The headstamp code on the label "MEC" means that it was made by the Explosives Factory Maribyrnong - Cordite Annexe, Maribyrnong, Melbourne, which made cordite propellant for cartridges and shells. Shell Case 1298.02: The headstamp "MF" indicates it was made by the Small Arms Manufacturing Factory in Footscray, Melbourne, and the stamped year was 1941. THE MISSIONS TO SEAMEN (Brief History): - The Missions to Seamen was an Anglican charity that has served seafarers of the world since 1856 in Great Britain. Its symbol is a Flying Angel, inspired by a Bible verse. Today, there are centres in over 200 ports worldwide where seamen of all backgrounds are offered a warm welcome and provided with a wide range of facilities. In Victoria, the organisation began in Williamstown in 1857 as a Sailors’ Church, also known as ‘Bethel’ or the ‘Floating Church’ in an old hulk floating in Hobson’s Bay, Port of Melbourne. It soon became part of the Missions to Seamen, Victoria. In the year 2000, the organisation, now named Mission to Seafarers, still operated locally in Melbourne, Portland, Geelong and Hastings. The Ladies’ Harbour Lights Guild was formed in 1906 to support the Missions to Seamen in Melbourne and other centres, such as Williamstown. Two of the most significant ladies of the Guild were founder Ethel Augusta Godfrey and foundation member Alice Sibthorpe Tracy (who established a branch of the Guild in Warrnambool in 1920). The Guild continued its work until the 1960s. In 1943, a former Williamstown bank was purchased for the Missions to Seaman Club. The chapel was named St Nicholas’ Seamen’s Church and was supported by the Ladies’ Harbour Lights Guild, the Williamstown Lightkeepers’ Auxiliary and the League of Soldiers’ and Sailors’ Friends. It ceased operation in 1966. A Missions to Seamen Chapel and Recreation Room was a significant feature of ports during the late 1800s and into the 1900s. It seemed appropriate for Flagstaff Hill to include such a representation within the new Maritime Village, so the Melbourne Board of Management of Missions to Seamen Victoria gave its permission on 21st May 1979 for the entire furnishings of the Williamstown chapel to be transferred to Flagstaff Hill. The St Nicholas Seamen’s Church was officially opened on October 11, 1981, and closely resembles the Williamstown chapel. These shell cases are significant for their relationship with the Australian Army in general and in particular with the defence of Australia during World War II. The may have also been made for the Navy. Their significance is increased by their association with the Williamstown Missions To Seamen, which donated them to Flagstaff Hill in 1979, an organisation that has supported seafarers for many years.Shell case: two brass 4" rimmed shell cases with headstamps (inscriptions) on the base plate around the firing pin three holes evenly spaced around the centre of the base. A label is attached to one shell. The shell cases are part of the St. Nicholas Seamen's Church Collection. Shell Case 1298.01 - Printed stamp “P.2BT” “M.E.C.111” “I.E. 10/43”. Stamped into base “N”, “1940” “W [within lozenge]”, “S” symbol [Australian Government Arrow] “360“ . Around firing pin “MF I 422” “ME” “II” “4 I N” “5-“ ”MF [within rectangle]” “f” “B – [within circle]”, Shell Case 1298.02 - headstamp “N 1941 MF / F symbol [square box] LOT 679”, [in oval] 101 / 4 / S /U2) M GUNS 7 “, symbol [Australian Government Arrow], Stencil [in red circle] “B J”, symbol [Diamond with line top to bottom] Stamped in red ink “R5G 11 1 2B7”flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, munitions, shell case, ammunition 1940, ammunition 1941, firearms, cannon, australian government, borad arrow, australian army, wwii, world war 2, australian defence, australian ordinance, small arms manufacturing factory, explosives factory maribyrnong, cordite, world war ii, ww2, 1940, 1941, defence, n headstamp, footscray

Albert was founded as a Roman outpost, in about 54 BC. After being known by various forms of the name of the local river, the Ancre, it was renamed to Albert after it passed to Charles d'Albert, duc de Luynes. It was a key location in the Battle of the Somme in World War I, and World War I tourism is important for the town. During World War I, the statue of Mary and the infant Jesus – designed by sculptor Albert Roze and dubbed the Golden Virgin – on top of the Basilica of Our Lady of Brebières was hit by a shell on 15 January 1915 and slumped to a near-horizontal position, where however it remained until further shelling in 1918 destroyed the tower. The German army recaptured the town in March 1918 during the Spring Offensive; the British, to prevent the Germans from using the church tower as a machine gun post, bombarded and destroyed the basilica.[5] The statue fell in April 1918 and was never recovered. Albert was completely reconstructed after the war, including widening and re-orienting the town's main streets. The Basilica, however, was faithfully rebuilt according to its original design by Eduoard Duthoit, the son of the architect who had overseen its construction in 1885–1895. The present statue is an exact replica of Roze's original design, and a war memorial designed by Roze and featuring an image of the Leaning Virgin can be seen in the Abri (Shelter) Museum, which houses souvenirs of the war. The underground shelters in which the museum is located served as protective bunkers for Albert's residents during aerial bombardments in World War II. (Wikipedia)Photographs of the Church at Albert taken during a tour of the World War One battlefields.albert, church, the somme, world war one

North Wangaratta State School 2391 was opened in May 1881 and closed October 26 1969. Today a plaque commemorates the site of the old school in Eldorado Road North Wangaratta. The Honour Board preserves the names of past students who enlisted to serve their country during the First World War and commemorates those who lost their lives. In 1965 after being stored in a woodshed for two years the Honour Board was put on display at The Eldorado Memorial Hall. The Eldorado Memorial Hall Committee became Trustees of the Honour Board and 1992 approved its transfer to the Vine Hotel Museum for public display. In 1996 at a meeting held on February 7, the Wangaratta North State School No 2391 Memorial Committee moved a motion that all memorabilia pertinent to the Wangaratta North State School be displayed at the Vine Hotel Museum under the guardianship of trustees appointed by the Wangaratta North State School Memorial Committee. In 2005 The North Wangaratta State School Trustees donated the Honour Board along with two photographs of WW1 soldiers to the Wangaratta RSL for safe keeping and display to the public. Students who enlisted include:- Private (Shoeing Smith) John BLAIKIE 2341 who was born at Wangaratta. He was a Blacksmith and at the age of 42 enlisted on May 28 1915. He embarked on August 10 1915 and served with the 14th Battalion. He returned to Australia in January 1918 and discharged medically unfit on April 10 1918. 5692 Private William Thomas BYRNE was born on 21/9/1890 at Docker Plains. He was educated at Docker Plains and Wangaratta State schools. A farmer when he enlisted on 13/10/1914. He trained at Broadmeadows and embarked on Hororata on 17/4/1915. He served with the 3rd Light Horse and 12th and/or 27th ASC - Army Service Corps as a Driver. 5347 Private Cyril BUCKLER, 14th Battalion. A postman from Wangaratta, Victoria, prior to enlistment on 16 February 1916 he embarked from Melbourne aboard HMAT Euripides on 4 April 1916 for Egypt. His unit relocated to the Western Front, France, in June 1916. Pte Buckler was killed in action near Pozieres, France, on 7 August 1916. He has no known grave and he is commemorated on the Villers-Bretonneux Memorial 3451A Private Sydney Spencer PLUM 1st Pioneer Battalion A.I.F, Born January 3rd 1894 at Dockers Plains. He was educated at North Wangaratta and Docker's Plains State School. He was a blacksmith when he enlisted June 12th 1915. He was trained at Flemington Racecourse and embarked on SS "Nestor" October 11th 1915. He fought in battles; Peronne, Cambrai, Somme. Being wounded 3 times. He embarked for home per SS "Orontes"; disembarked January 28th 1919 and he was discharged March 16th 1919. He died on July 25 1958. 483 Private Percy Albert TIPPETT served with the 6th Battalion AIF and was wounded on the 25/4/15 during the initial landing at Gallipoli and later died on 28/4/1915. 1981 Private Francis John VONARX Enlisted at Wangaratta on 15/6/1915 aged 33 years and embarked on 26/8/1915. Served with the 23rd Infantry Battalion and 2nd Machine Gun Battalion. Returned to Australia on 8/4/1919 On 13/4/2024 the Honour Board was deaccessioned from the RSL collection for permanent display at North Wangaratta CFA Brigade.Honour Board listing the 52 names of North Wangaratta State School students who enlisted to serve their country during the First World War and commemorates those who lost their lives. Large solid timber Honour Board with two carved minature cannons on top and above side columns."North Wangaratta State School/Roll of Honour/The Great War 1914 to 1919" 52 names in gold paint.north wangaratta state school 2391, honour board ww1

A complete set of 8 blueprints from “Popular Mechanics Magazine”, Chicago. The blueprints are on a royal purple coloured paper with white print. Each print displays labelled diagrams to assist the hobbyist to assemble the ship model “Sovereign of the Seas”. The designer is Harold T. Bodkin. Distinct fold creases divide the documents into quarters. There is some silverfish damage leaving holes, however, all instructions are visible. flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum and village, shipwreck coast, great ocean road, model ship, vessel sovereign of the seas, jim williams, james bernard williams, the forth tasmania, freda williams, heather williams, phyllis bowditch, fletcher jones staff 1936, 17th century sailing ship, cramond and dickson, sovereign of the seas, royal sovereign, sovereign, charles 1, fletcher jones, warrnambool breakwater, popular mechanics magazine

A brown coloured cardboard cover with an orange section with the details in black ink. Top right hand corner there is a label with Property of National Vietnam Veterans Museum on it. The manual is bound with a brown material binding. The manual is held together iwth two metal clips.military weapons, ordnance bl 5.5in mark 3, carriage 5.5in or 4.5in gun mark 2, accessories/ancillaries, manual

A blue coloured cardboard cover with black information on the front. Top right hand corner reads 7610-66-015-3985. Under the Australian Coat of Arms insignia is the description of the booklet. There are two rusty metal staples down the left hand side.australian army, booklet, infantry training, infantry platoon weapons, m 60 machine gun 7.62

A stained dark crea coloured cardboard cover with black information on the front. Top right hand cornder reads User Handbook. Handwitten in the numbers 134360 and under this are the details of the Manual. The manual is held together by a metal slide on the inside of the cover.handbook, turret, machine gun t-50, technical manual

A blue coloured cardboard cover with black information on the front. Top right hand corner handwritten is the name Cox and under this reads DSN 7610-66-035-3416. Under the Australian Army insignia are the details of the manual. There are two punch holes and two metal staples down the left hand side. Note that the back cover is missing.howitzers, manual, australian army, howitzer light towed 105mm, howitzer 105mm, carriage m2a2

A blue coloured cardboard cover with black information on the front. Top right hand corner reads 7610-66-023-3614. Under the Australian Coat of Arms are the details of the booklet. The booklet is held together with two metal staples.australian army, infantry training, infantry platoon weapons, sub-machine gun 9mm f1, booklet