Single truck (4 wheel) straight sill combination tramcar with open ends, closed centre saloon, longitudinal seats. Centre section originally an 1892 Sydney cable car trailer ( No. 18 - North Sydney). No mechanical equipment of the 1905 tram has survived. For an article on the tram and progress during 2018 see August 2018 issue of Fares Please! See Conservation Plantrams, tram 12

Seed broadcaster were used to distribute seed across a small area or to fill in patches where seeding has been missed. This method does not ensure a uniform distribution of seeds unless the person using the machine walks at a very measured pace. It also requires a lot of time and manual labour if used in larger areas. It was most used for planting cover crops, grains, grasses and similar plants that do not need to be in neat rows. The hand-crank broadcast seed spreader was invented in 1868 by Samuel S. Speicher (aka. Spyker) in Indiana, USA. By 1955 new developments included the invention of a seed broadcaster on wheels and these smaller spreaders started to disappear.This item is representative of agricultural machinery used on a local, national and international level in the late 19th and early 20th century.A metal hand seed broadcaster. A hopper at the top was the receptacle for seed. The wheel with a handle on the side when turned drives the cogs attached to an axle. This action rotates the attached spindle with blades to propel seed out the front of the broadcaster. The broadcaster would have had a shoulder strap and a bag of seed would have been added to the hopper and secured with twine through the holes around the top.agricultural tools, farm machinery

Printed fold out timetable for Bus Route 754, Glen Waverley to Wheelers Hill, published by The Met, effective 29/10/1984. Provides a map, description of route, time points, timetable, ticketing information (Travel cards and Neighbourhood tickets) and the Glen Waverley Railway station and train service. Has a sponsored advert by the Statewide Building Society. Has logos of the Met. Folded into four.trams, tramways, tickets, the met, bus services, timetables, neighbourhood tickets

Dyeline print of Drawing R1146, "General Data of Tram Cars", listing tram car number, type of body, seating capacity, truck wheel base, Motors, Horse Power, Tare tons, controllers and compressor type. Has an amendment date of 24.9.1924. Lists tramcars through to X 218, cable cars, W 338 and depot allocation if they were Coburg, Hawthorn or Footscray.trams, tramways, tramcars, mmtb, lists

Dyeline print of Drawing R10-100, Rev A, "Rolling stock data - work cars", listing MMTB Work cars, giving the original number, car number, type, truck, wheel base, Motors, HP, Tare, Controller, Compressor and Length. Has had No.6, Truck Suction Car had written in using blue pen and another trams (18 and 20) partly written in.trams, tramways, work trams, mmtb, lists, scrubber tram

This photo is of Neddy Wheeler - Dhudhuroa man and language informant to RH Matthews. The photo was taken at Lake Moodemere. Neddy spent the latter part of his life here, especially after his Wife Charlotte and children Thomas, Harry, Dolly and Kate were taken from him in the Kiewa Valley and taken to Lake Tyers.The Aboriginal Protection Board would provide travel passes for him to visit his Country. He died in April 1908Black and white photograph, printed on postcard, showing view of Lake Moodemere, with a man wearing a jacket and hat, reclining on the bank in the foreground.Printed at top of photo: "Lake Moodemere, Rutherglen"lake moodemere, neddy wheeler, dhudhuroa, charlotte wheeler, thomas wheeler, harry wheeler, dolly wheeler, kate wheeler, kiewa valley, lake tyres, aboriginal protection board

City Circle pamphlet - contains a map of the route and intersecting tram routes, with the route number "35" on both sides and major locations of interest. Has an image of W6 957 with a montage behind of inner Melbourne iconic buildings and the Docklands wheel. Gives times for the service with a QR code to check if the service is running that day Has Yarra Trams and PTV logos. In use during 2022/2023. On the day of cataloguing, Sunday, the service was shown as not running that day. Yields information about the City Circle tram service.Pamphlet - 3 fold DL - full colour. Two copies held.tramways, city circle, yarra trams, docklands, route 35, ptv

Churchill Island Heritage Farm has a large photograph collection dating from the nineteenth century to the present.Black and white photograph of two men loading hessian sacks onto a furled sailboat. Ted Jenkins sits in the boat while Arthur Evans carries the sack.Catalogue number written in pencil on the reverse. Handwritten on reverse in pen '1941 Loading superphosphate on the Phillip Island side of the crossing - at the end of Churchill Island road. The "big" boat. Ted Jenkins with his back to camera. MYSELF (ARTHUR EVANS) doing the loading (The bags were wheeled up the plank on a wheelbarrow) see other photo'churchill island, ted jenkins

This piece of equipment was used to predict the flight path of an aircraft in order for anti-aircraft artillery to fire accurately at an approaching enemy airborne target. A crew of six operated the machine with information ready to be relayed to a gun within 50 seconds. The predictor was manufactured at the Commonwealth Government Ordnance Factory, Maribyrnong.The item is made primarily from metal, is square shaped and bolted to a wooden base. Numerous hand operated wheel dials attached to gauges which input information related to wind speed, bearings and elevation are visible. Each of the four sides has a specific task with three sides being labelled - Elevation Unit, Wind Calculator, Bearing Unit. The item is housed in a glass and wood display case. Attached to the front of the display case: 'VICKERS A.A. PREDICTOR No1 MK III MANUFACTURED BY ORDNANCE FACTORY MARIBYRNONG'pedictor, military equipment, ordnance, anti-aircraft guns

These knitting pattern leaflets were published by Patons and Baldwins and contain knitting patterns for women's and men's garments. Patons & Baldwin began as two separate companies: J & J Baldwin and Partners, founded in the late 1770s by James Baldwin of Halifax, West Yorkshire, England, and John Paton Son and Co., founded in 1814 by John Paton of Alloa, Scotland. Both men had formed their businesses using the spinning mule developed by Samuel Crompton. They mainly produced yarns for commercial knitting machines. Patons established itself in Australia with its first mill built in Tasmania in 1923. For decades, Patons was the leading hand knitting yarn brand but due to the market conditions in the mid 1980's, Patons felt the decline and eventually amalgamated with Alliance Textiles, New Zealand in 1996. Patons Australia was acquired by Australian Country Spinners in 2000. Knitting has always had a great appeal to women, as it needs few tools. Companies which manufactured yarn often produced instruction guides and patterns. These pattern books are typical of the knitting pattern books commonly used in the mid 20th century. The patterns contained are for garments commonly worn at that time.Two knitting pattern books. Both are black / white and contain knitting patterns. 821.1 cost 7d, is titled "Patons Specialty Knitting Book No. 145" and has on the front cover a lady standing near a buggy wheel. 821.2 cost 1/3, is titled " Patons Knitting Book No. 394 (introducing Patons Double Quick Knitting)" and has has on the front cover a photograph of a man on a boat.knitting-patterns needlecraft patons-baldwin

Letter, dated 6 December 2016 to the Bendigo Historical Society from Jan Grose in reference to her donation of a framed ceramic plate with the 'Flame of Friendship' painted on it. Mentioned in the letter is a brief history of the Flame of Friendship. Also mentioned in the letter is Jan has enclosed her Mother's Eulogy as presented by her on the day of her funeral and also enclosed the Eulogy given by The Inner Wheel of Bendigo South.bendigo, clubs, inner wheel club south bendigo, inner wheel club south bendigo: letter from jan grose, mrs heather mcleod, mrs elsie twitt, flame of friendship

Opaque Red glass lamp base and clear glass top. Dark metal top on base which houses the base for the top and the opening for the wick to raised and lowered by the round wheel also on this metal base. Grecian urn shaped base. Black tape around bottom edge of base, also strips of black tape on inside bottom of base. Perhaps to assist with repairs where base is damaged

Hugh Lennon began making ploughs in Carlton from 1960 and within 10yrs the patented steel plough ,suitable to Australian conditions was outselling all imported cast iron mouldboard ploughs. This general purpose mouldboard plough was used to form the streets in Yarrawonga during the 1880's........from James A. Irwin of Oaklands [formerly Lake Rowan] "This plough was used by William Christians and John Holmes [Jim Irwin's father -in-law]when they worked on the formation of Belmore St, Yarrawonga" circa 1880- 1890'sThe early settlers [1870] used this type of plough pulled by one horse.to prepare their ground for wheat sowing. From the early 1880's the double -furrow plough came into general use, pulled by 2 horses. Being a wheeled machine, it allowed the ploughman to sit on the plough and save miles of walking during ploughing operations. Over the years ploughs became bigger, and needed more horses to pull them.

Car belonged to Michael Smith, grandson of Society member Valda Arrowsmith. Always dreamed of owning a Ferrari, so at about aged 15 he purchased this model (1996)Red model Ferrari racing car. Four rubber tyres with Eagle Good Year stamped on each. Wheels have gold spokes and rims. Each side has 'Asprey Pioneer Arexons SKF brembo BBS & the Shell sign printed on it.The driving seat has seat belt, steering wheel and windscreen. Base Ferra. F310 (1996) Scale 1/20 Maisto ShellAsprey Pioneer Shell / Good Year / Schumachertoys, mechanical, transport, models

CunninghameSepia coloured postcard of first bridge over North Arm, showing view of town buildings, including Club Hotel; sand hummocks; Cunninghame Arm; die back of melaleuca on sand flats. In foreground post and rail fence beside road, two wheeled horse drawn vehicle, jinker, with grey horse standing in shafts. Ten or eleven people standing on bridge. Lakes Entrance Victoriatopography, bridges, transport

Brass door roller from a former Melbourne cable car trailer - numbered 2 222 - probably No. 2 end of trailer No. 222. Consists of a large cast section for attachment to the top of the door, roller wheel and axle. Cable trams commenced in 1885 and by 1891 there were 350 sets. (see reference) See p79 of "Mind the Curve", John D.Keating re number of tram built by 1891.melbourne, cable trams, door roller, tramcar component

Yields information about the SEC tram fleet and equipment up to 1952.Handwritten list of SEC Tramcars 1930 - 1952, titled "SEC Ballarat Rollingstock 1930- 1952" written to tram No. 40, listing number of wheels, former owner and class, arrival in Ballarat, Builder, Trucks, Wheel base, Controllers, whether fitted with dead man handle and remarks. Contained within Reg Item 5507 - Foolscap binder with green covers, black binding edge and metal clips. sec, tramcars, controllers

A flat straight metal woodworking tool with two wooden line patterned handles used to remove surplus large chunks of wood and taper the sides of timber for floorboards, paneling and such before planing them. It can be used to to fashion tool handles, wooden sculptures stool legs or wheel spokes. The final finishing on such work was done by a Spoke Shave tool which we also have in our collection.Stamped on the blade is a horse head with the manufacturer's name Hale Bros Sheffield England below.woodcarving tools, drawing knives, shaves, handtools, iron

badge - Australian Tramway Employees Association (Tramways Union) badge. Badge made on a steel/ silver backing with words "Australian Tramway Employees Association" on outer edge of badge with a royal blue enamel background. In centre of badge has the Australian coat of arms with a railway type spoke wheel above the logo and underneath the coat of arms the words "Federated Australia" in a banner. On the back of the badge is stamped "205"trams, tramways, unions, badges, atea, employees

A marking gauge, also known as a scratch gauge, and] is used in woodworking and metalworking to mark out lines for cutting or other operations. The purpose of the gauge is to scribe a line parallel to a reference edge or surface. It is used in joinery and sheet metal operations. The gauge consists of a beam, a headstock, and a scribing or marking implement, typically a pin, knife, pen or wheel. The headstock slides along the beam, and is locked in place by various means: a locking screw, cam lever, or a wedge. The marking implement is fixed to one end of the beam.A tool that has been in use since woodworking began for hundreds if not thousands of years without much change to the design or how the tool is used. Its use to scribe a line in various material as a cutting guide and is still in use today by many trades. Wooden marking Gauge, smallNonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, marking gauge, woodworking, carpenters tools, tool

Commercial tin openers first appeared in the mid 19th century and this model dates from the early 20th century. An improved version when a second serrated wheel was added came into operation about the mid 1920s. Tins (now cans) of food with sealed tops became popular in the 20th century and all households needed a tin opener. Today the can opener is still used but increasingly the can lids have an inbuilt clip that is pulled out to open the can. This tin opener has no known local provenance but it is retained as an early model of a tin opener from the past. It will be useful for display. This is a cast iron tin opener with a cutting blade attached to a piece of metal with a screw. The metal handle curves out from the metal piece holding the blade. The opener is a little rusty in parts. The name ‘Guard ’ is on both sides of the handle in raised metal letters.‘Guard’ household items, history of warrnambool

These labels come from the Brewery of Hodgens & Co. who operated the Warrnambool Brewery west of the corner of Timor and Banyan Streets This brewery was established by Edmund Wheeler as the Western Brewery in 1866. Daniel Hodgens the principal of Hodgens & Co. owned the Warrnambool Brewery from sometime in the 1890s until 1909. (Hodgens died in 1907.) Daniel Hodgens also owned the National Hotel and the Pieter Both Hotel and leased the Union, Princess Royal, Prince of Wales and the Bayview hotels in the late 1890s.These labels are of considerable interest as they are artistically pleasing and are part of an important brewery business in Warrnambool in times past. .1 Oval grey and white label adhered to a piece of cream coloured card. It has a sketch of a lake and hills in the centre which resembles Tower Hill .This is surrounded by a wide border containing text. The label is discoloured .2,.3 Dark cream paper rectangular labels with black and white text. There are decorations of berries and leaves in one corner. The primary texts are contained in two long arcs and a black rectangle. Both labels are torn. .2 has a section missing. .4,.5 Rectangular labels with a curved top and extended side panels. It features,on a gold coloured background, the profile of Punch wearing a crown with a striped red and white stocking attachment. Punch has a long hooked red nose and is raising a flask towards his mouth. Above him in the curved top section are two diagonal red and dark green panels containing text. Underneath Punch are two rectangular wide, dark green and white panels containing text. The extended side panels are at right angles to the central section.There are two crosses on the top and bottom of .5 The section containing these and also a sections beside the side extensions have been removed from .4. .1EXTRA NOURISHING STOUT HODGENS & CO WARRNAMBOOL .2,.3 HODGENS & CO. WARRNAMBOOL BREWERY BRAVO ALE Refreshing, Invigorating and Contstiting (sic.) an Appetising Tonic while slightly Stimulating. Easy of Digestion HODGENS & CO PROPRIETORS WARRNAMBOOL .4,.5 A CERTAIN CURE FOR INDIGESTION HOT STUFF USED WITH BEER SPIRITS AND AERATED WATERS A DELICIOUS DRINK . Bottled for the Manufacturers by Hodgens & Co. at their Spirits Stores. . warrnambool brewery 1885-1909

John Ingram, baker of Research and his wife Ada (nee Key) owned a holiday house at 9 Minifie Avenue, Anglesea. At some time between 1943 and 1949 they relocated permanently to Anglesea. It is difficult to make out the car (registration 155-405). It appears to be a roadster style with wooden spoke wheels and spare wheel mounted on boot. Typical of a 1928 Dodge roadster. The woman standing in front of the fence in a swimming suit, holding a towel and wearing a coat is unidentified. The house is named 'Glenair'.9 minifie avenue, anglesea, house, ada ingram (nee key), 155-405 (victorian registration), car, john ingram, glenair, ingram family, pam thoonen (nee ingram) collection

"Until 1865, all wheeled traffic to the Upper Yarra District passed through Christmas Hills along present day Ridge and Muir roads, then followed the hazardous course of "The Breakneck" (now Breakneck Road) to the valley below. To slow the descent of wagons, logs are said to have been dragged behind. In 1865, an easier route was opened on the south side of the Yarra River, and led to the birth of Lilydale". - Christmas Hills Past and Present (Yarra Glen District Historical Society), 2004.Digital copy of colour photographfred mitchell collection, 2016, breakneck, yarra glen

"Until 1865, all wheeled traffic to the Upper Yarra District passed through Christmas Hills along present day Ridge and Muir roads, then followed the hazardous course of "The Breakneck" (now Breakneck Road) to the valley below. To slow the descent of wagons, logs are said to have been dragged behind. In 1865, an easier route was opened on the south side of the Yarra River, and led to the birth of Lilydale". - Christmas Hills Past and Present (Yarra Glen District Historical Society), 2004.Digital copy of colour photographfred mitchell collection, 2016, breakneck, yarra glen

A hand trolly can be loaded with heavy objects such as luggage, produce, and equipment and the objects can then be easily wheeled from one place to another. They are used by farmers, railway workers, shipping companies, porters, factory labourers and other industries when heavy loads need to be moved. Hand trolleys were first used in the 18th century by young workers at the docks. The new equipment used leverage and wheels, enabling them to move the same heavy loads that the men were moving. This hand trolley is an example of the hand trolleys used since the 18th century to move heavy loads at the docks and shipyards. It is associated with the maritime industries of shipping, transportation, travel and trade as with the primary production sectors of farming, markets and produce. Hand trolley; an L-shaped handcart with handles at one end, wheels at the other, and a ledge to hold the load. This hand trolley has orange wooden slats and handles, two metal wheels and a black metal frame. It has supporting legs at one end, two metal flanges near the wheels and a support foot at the bottom. There is an inscription on the metal at one side.Stamped into metal: "MSSC"warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, hand trolley, sack truck, trolley, luggage trolley, hand truck, trundler, sack barrow, bag barrow, leverage, marine technology, cargo handling, docks, wharft, shipping, trade

A very small number of these Gilera 100 three wheeled motorcycles were purchased by Ambulance Victoria so that paramedics could negotiate traffic in built up areas and attend patients more quickly. Unfortunately, the paramedics using these vehicles did not feel they were safe to drive and they were soon withdrawn from service and replaced by conventional BWM motorcycles. This vehicle has only around 4500 kilometres usage on its speedometer. Source Chas Martin curator AHSVMotorcycle with twin front wheels.1E-SUD 7362paramedic, gilera

Beech Forest Railway Station was constructed in 1902 and had a number off additions to it over the years. At the far end of the station in 1902/3 was constructed a 'balloon' reversing loop, rather than a turntable or a triangle, which rolling stock used in order to even the wear on the wheels. However, the trains also used it. The Garrett in particular was supposed to be turned every second trip to even out its wheel wear, although this was usually ignored for other reasons. The loop was used throughout the life of the station.Colour. Beech Forest Railway Station showing the 'balloon' reversing loop at the far end. The tennis courts and shelter are in the background.beech forest; railway; balloon loop;

The former mill and weir shown in the photograph were sited on the banks of Jacksons Creek downstream from the town of Sunbury. John Eadie, a Scottish immigrant established the water-driven flour mill on the banks of the creek after he arrived in the colony in 1866. The mill continued operating until the outbreak of World War 1 when the metal wheel and iron roofing were taken and used for the war effort. The hill in the back ground with the trees and buildings was the site of the former Sunbury Asylum. Milling was one of Sunbury's early industries that were established in the district.A black and white photograph of a building and a lake in a valley. Buildings and trees are visible on a distant hillside.sunbury flour mill., milling