Showing 15806 items
matching metal
-
Warrnambool and District Historical Society Inc.
Functional object - Hurricane lamp, c. 1920
This is a hurricane lamp, so called because the tall glass dome was designed to protect the flame from excessive draft. These lamps were common in households in the first half of the 20th century ( used for house lighting) and later used for camping and out door activities.This item is retained as an example of type of lighting used in pre electricity times.This is a metal lamp with a glass bowl contained within a metal frame with a handle. There is a mantle inside the bowl. On the metal frame and base are various mechanisms for controlling the flame and a place for filling the container at the bottom with kerosene. The metal is heavily rusted with splotches of paint.vintage lighting, hurricane lamps -
Warrnambool and District Historical Society Inc.
Tools, Spoke Shavers x 2, Late 19th century/early 20th century
Spoke shaves were used by woodmakers to shape curved surfaces (originally wheel spokes). These two spoke shaves belonged to Ernest Phillips of Warrnambool who would have used them to shape the surfaces of chair and table legs etc. Ernest Brighton Phillips (1875-1924) was the son of Henry Phillips (a hay and corn dealer in Warrnambool) and his wife, Emma. He learned cabinet making at the Box Works in Warrnambool and in the late 19th century established a furniture-making and selling business at the corner of Liebig and Koroit Streets. By the early 20th century he had the largest furniture warehouse and factory in Victoria outside Melbourne and sold his products all over Australia. He and his family lived at ‘Heatherlie’ in Koroit Street and after his death this Phillips house was acquired by the Methodist Church and the Heatherlie Homes for retired people were built on this site.These tools are of considerable significance as they were used by Ernest Phillips, a prominent businessman in Warrnambool during the late 19th and early 20th centuries. These are two spoke shaves - small planes, slightly curved, with wooden handles and a metal blade in the middle. The blade is attached to the handles via metal ends which go through holes in the wood. The blade area is strengthened with metal plates attached by metal screws. The metal parts are well-rusted and the handles are somewhat worn. ‘E. Phillips’ etched into wood on each spoke shave.ernest phillips, history of warrnambool -
Warrnambool and District Historical Society Inc.
Small Hand Drill, Late19th century
This tool is one of a collection of tools that are believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy and came to Warrnambool where Henry formed a partnership with Christopher Beattie to establish the undertaking firm of Beattie and Phillips. This business continued after the deaths of the two founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved with the management of the Mechanics Institute. This tool is of interest, firstly because it is a good example of a vintage tool and secondly because it is a memento of the Warrnambool carpenter and businessman, Henry Phillips. This is a small hand drill with a metal piece containing a composite material handle at one end (for one hand) and a metal piece at the other end for the insertion of a drill. Attached to the main metal piece is a circular piece of metal with spokes and a wooden turning handle (for the other hand). The handle is attached to the circular spool by a metal screw. vintage tools, henry phillips, warrnambool, history of warrnambool -
Warrnambool and District Historical Society Inc.
Household, Scales - Grain tester, Early 20th century
This grain scale tester was used to work out the percentage weight of a sack of grain after the grain husk, dust and dirt were removed, thereby allowing for the calculation of the true value of the sack. The parts were attached to the box via the screw on top of the box and the cleaned grain went into the funnel to measure a fixed grain amount, before being released from the bottom of the funnel into the barrel which was then hung on the end of the scale. The weight was then slid down the graduated ruler until the scale balanced. Grain scale testers would have been used in farming in the Western District in the past and similar objects may still be in use. This grain scale tester is retained as a good example of an agricultural item from the past.This is a grain tester scale in a wooden box. .1 The wooden box has two metal hinges and wooden inserts inside with blue felt on the tops of the inserts. The box has a metal plaque on the lid and a round metal hole section for inserting a piece of equipment. .2 This is a metal flask on a stand. Part of it is rusty. .3 This is small metal cylinder with a lid. .4 This is a metal bar with measurements, a hook at the top and a slide or weight fitting on to the bar. .5 This is a small metal screw. ‘Lbs per bushel’ ‘Australian Manufacture by Australasian Scale Co. Ltd., Thomas Street, Sydney N.S.W.’ agricultural instruments, history of warrnambool, grain scale tester -
Geoffrey Kaye Museum of Anaesthetic History
Inhaler, Clover, Mayer & Meltzer, 1877
Dr. Joseph Clover (1825-1882), an English physician, first described his Portable Regulating Ether Inhaler on Jan. 20, 1877. Clover was an especially sought after anesthesiologist and early pioneer in the specialty. This was the best-known of many inhalers that Clover designed. The dome-shaped reservoir was turned to points on a control dial to gradually increase or decrease the percentage of the air that passed over the ether. Several inventors based new inhalers on this, while the original continued to be manufactured as late as the beginning of WWII. (Source: Wood Library Museum)Black round topped box with brass hooks at front and brass hinges at rear. There is a black fabric handle on the top. Inside the box is black padding with the manufacturer's logo printed in gold leaf. There is a square section in the base of the box for holding the square clear glass bottle for ether. There is also a dome-shaped metal inhaler with a "whistle tip" type connection to the mask. The mask is made of tan leather. There is also a metal ether measure for pouring the ether.Printed in gold leaf inside lid of box: MAYER & MELTZER [?] PORTLAND ST. / MAKERS •Engraved on side of inhaler: Mayer & Meltzer / London •Stamped on connector of inhaler: MAYER & MELTZER RN NO 212327 •Engraved on rear of inhaler: Clover's Inhaler •Printed in white on blue sticker: O.2.5A •Measurements have been stamped on the bottom of the inhaler. •Printed in black ink on mask: MADE IN ENGLAND •Stamped on metal connector inside mask: 6 •Printed in black ink on white manufacturer's label on glass bottle: ETHER PURUS '720 / H. Francis & Co., Melbourne.clover, joseph, mollison, crawford henry, george bankin, mccaul, kevin, royal women's hospital, coroner, freemason, surgeon, gynaecologist, obstetrician, mayer & meltzer, francis & co, melbourne, ether purus -
Moorabbin Air Museum
Manual (Item) - Practical Air Navigation
Description: 102 pages. Published by D. Van Nostrand Company, Inc. Published September 1941. Airplane Metal Work Vol. 3 - Airplane Sheet Metal Pattern Development and Template Making Level of Importance: World. -
Warrnambool and District Historical Society Inc.
Gladstone Bag, Mid 20th century
This is a suitcase known as a Gladstone bag. It is named after William Gladstone (1809-1898), a four-time Prime Minister of England. Gladstone bags were first produced by Edward Cole in London in 1854. This item has no particular local provenance but bags such as this one were commonly used, mainly by men, for business and sporting purposes. As it was compact and stored quite a lot of material in its deep interior, it was a popular choice for men travelling by public transport to the workplace or to sporting events. This Gladstone bag is retained for display purposes as an example of a mid 20th century suitcase.This is a small suitcase, called a Gladstone bag, made of stiffened brown leather built over a rigid metal frame. It has a leather handle on top of the metal frame and a metal lock on the side of the frame. There are metal clips to enclose the ends of the frame. There are metal straps attached to the sides of the case. Inside, the bag is lined with light brown cloth and there are two pockets on one side. The metal parts are somewhat rusted. warrnambool, vintage suitcases, gladstone bag, history of warrnambool -
Warrnambool and District Historical Society Inc.
Needle case, The Crescent Manufacturing Company, Early 20th century
This needle case, probably dating from early in the 20th century, contained knitting needles of various sizes and those needles were probably used in sets of four to knit such items as socks. In the early to mid 20th century many items of clothing and furnishings were hand knitted with the yarn mostly favoured being wool. Today knitting is a hobby taken up by a few and clothes that were once knitted are now bought ready-made. This needle case is of antiquarian interest and is retained for display purposes. This is a cylindrical metal case with a gold-coloured marbled pattern around the case and closed metal ends. One metal end swivels around to reveal four compartments that once contained metal knitting needles. One of these needles remains. The case has printing on both metal ends and on the case body but much of this is now indecipherable. The Crescent Case Best English Knitting Instructions …. antiquarian household objects, history of warrnambool -
Dutch Australian Heritage Centre Victoria
Coffee grinder (koffiemolen), Circa 1950
Brought to Australia in the 1950s by Dutch migrants. These coffee grinders were in common use in the 1940s amd 1950s as an altrrnative to wall-mounted coffee grinders. They were operated by clamping the grinder between one' knees. The drinking of coffee is a highly social ritual among Dutch people. They brought this ritual with nthem to Australia as is evidenced by the number of coffee grinders and other coffee psraphernalia donated to the DAHC.Coffee grinder, wooden body, metal top. Wooden drawer in bottom, metal contaner for ground coffee. Metal top has circular raised section which has an opening with sliding lid to put in coffee beans. Metal handle with wooden knob in centre of top, connects with grinding mechanism inside metal top. Pe De on front above drawer.coffee grinder, kitchen ware -
National Wool Museum
Shearing cutter
"Cooper" metal shearing cutter with three points.Coopershearing -
National Wool Museum
Shearing comb
"Cooper" metal shearing comb with ten points.Cooper/ MASTER/ BEVELshearing -
National Wool Museum
Shearing comb
"Cooper" metal shearing comb with ten points.Cooper/ FLIGHTshearing -
Clayton RSL Sub Branch
Button, Anzac pin
early metal WW1 Anzac Day pinbrass looking pin with round head and long pin. HYAMS, Frederick collection"A" embossed over a map of Australia with Anzac Day stamped under the "A" -
Kew Historical Society Inc
Container, Gummed Labels, 1960s
One of a series of metal and cardboard containers in the collectionBox, shaped like a book with a simulated black leather spine used for retailing 'gummed labels'"Gummed Labels"gummed labels, containers -
Creswick Campus Historical Collection - University of Melbourne
Equipment - Delft scanning stereoscope
Green metal stereoscope in fitted wooden boxEquipmentold delft scanning stereoscope. Patent 542732 -
Warrnambool and District Historical Society Inc.
Household, Hack saw, Early 20th century
The handle of this hammer looks to be home-made and to have been used as a household tool. Most homes still today include a small hammer as a household item. The provenance of this hammer is unclear but it possible that it is the hammer found at ‘Guthrie’, a house in Merri Street, Warrnambool that was demolished. ‘Guthrie’ was the home of the Dickson family, prominent in Warrnambool business circles. James Dickson, with his friend John Cramond, established a store in Warrnambool in the mid 19th century and this department store, known as Cramond and Dickson, was a prominent business in Warrnambool until its closure in 1973. James Dickson’s son and his family lived at ‘Guthrie’ and the hammer may have belonged to the Dicksons or another family connected to that property. This hammer has a metal head and a wooden handle. The top of the handle has a metal screw inserted and small slivers of the wood are missing. The end of the metal section is much worn.household tools, history of warrnambool -
Warrnambool and District Historical Society Inc.
Household, Hammer, Early 20th century
The handle of this hammer looks to be home-made and to have been used as a household tool. Most homes still today include a small hammer as a household item. The provenance of this hammer is unclear but it possible that it is the hammer found at ‘Guthrie’, a house in Merri Street, Warrnambool that was demolished. ‘Guthrie’ was the home of the Dickson family, prominent in Warrnambool business circles. James Dickson, with his friend John Cramond, established a store in Warrnambool in the mid 19th century and this department store, known as Cramond and Dickson, was a prominent business in Warrnambool until its closure in 1973. James Dickson’s son and his family lived at ‘Guthrie’ and the hammer may have belonged to the Dicksons or another family connected to that property. This hammer has a metal head and a wooden handle. The top of the handle has a metal screw inserted and small slivers of the wood are missing. The end of the metal section is much worn.household tools, history of warrnambool, hammer -
Warrnambool and District Historical Society Inc.
Domestic object - Laundry Tub, early to mid 20th century
This tub probably dates from the early to mid 20th century and would have been a common item in households in those times. It could have been used for laundry items or for other washing processes in the kitchen. Wash houses in the early to mid 20th century were usually separate buildings or sheds outside of the house.This item is retained for display and discussion purposesThis is an oval- shaped metal tub wider at the top than at the base. It has a ridged top, a strengthening metal band around the base and two metal handles. It is somewhat rusty.vintage household items, warrnambool & district historical society collection -
Tennis Australia
Black and white transparency, Circa 1960s
Metal plate photographic negative image of a T.E. Robinson. Metal plate fixed to wood block. Also states 'L. Tennis Annual Report'. Materials: Wood, Metaltennis -
Tennis Australia
Net post, Circa 1920
A tennis net post, with detachable wood/metal upper from metal base. Inscription around base: SLAZENGERS/LONDON/COLONIAL. Materials: Metal, Wood, Paint, Ropetennis -
Tennis Australia
Racquet, Circa 1960
A pair of Dayton racquetball racquets, with metal frame and metal stringing, and fine-grooved wooden handle. Materials: Metal, Wood, Paint, Plastic, Adhesive tape, Ink, Gluetennis -
Mt Evelyn RSL Sub Branch
Ammunition belt, 1900 - stamped on belt
World War One, uniform, Australian, AIF, AFC, Australian Flying Corps, 37th Battalion, Mt Evelyn, Ascot Vale, First World WarThe significance relates to the fact it is a WWI item pertaining to the military service of Ernest Pearson MM during the Great War.Brown leather ammunition belt. Metal buckle that joins belt. Leather/metal buckle & strap that is attached to front of belt. Metal pins attached along leather belt. marked into leather - 1 1900ernest pearson, world war one, aif, first world war -
Parks Victoria - Days Mill and Farm
Domestic object - Cover, meat
Used to protect meat from the elementsOval mesh metal meat cover with metal rim at base, solid metal lid, handle at top and one side, other handle missing, evidence of patching and soldering -
Whitehorse Historical Society Inc.
Functional object - Carpenter's Bench Vice
Two large pieces of wood with a wide holed metal piece at one end. Large corkscrew metal pipe attached to metal tuning piece which is screwed into the wood.trades, carpentry -
Lorne Historical Society
Tool - Tripod for Cirkut Panoramic Camera Number 5
This tripod is part of the Cirkut Camera set used by William Anderson in Lorne A collapsible wooden and metal tripod. On top of the three legs is a circular geared metal plate with numbers surrounding it. On top of this is a metal plate with piece of wood and screw to attach the cameraCrown Tripod number 2 patented June 23 1903, Folmer and Schwing, Rochestercamera, lorne, william anderson, tripod -
Lorne Historical Society
Tool - Cirkut Panoramic Camera Number 5
This tripod is part of the Cirkut Camera set used by William Anderson in Lorne A collapsible wooden and metal tripod. On top of the three legs is a circular geared metal plate with numbers surrounding it. On top of this is a metal plate with piece of wood and screw to attach the cameraCrown Tripod number 2 patented June 23 1903, Folmer and Schwing, Rochestercamera, lorne, william anderson, tripod -
Flagstaff Hill Maritime Museum and Village
Gestetner Machine, c. 1922 - 1929
This Gestetner Cyclostyle duplicating machine was invented and manufactured by David Gestetner. He claimed in 1922, once he had released several models, that if a Gestetner Durotype stencil was used together with his Cyclostyle machine, then 10,000 copies could be made from the one Durotype stencil, an amazing claim for office technology of that era. David Gestetner (1854-1939), was born in Csoma, Hungary. He has been called the “founder of the worldwide office copying and duplicator industry.). He moved to London and in 1879 filed his first copying patent. In 1881 he patented the Cyclostyle stylus (or pen), which was used in conjunction with his Cyclograph device for copying text and images, He established the Gestetner Cyclograph Company in England at this time (1881) to protect his inventions and to produce his products; stencils, stylos (stylus or pen) and ink rollers. HIs inventions included nail-clipper and the ball-point pen (although the latter is more commonly associated with Laszlo Biro). Gestetner’s patented Cyclograph duplicator was used with his Cyclostyle Stylus or pen to write or draw on special thin wax-coated stencil paper (originally used for kite making paper) in the following way; 1. The Cyclostyle stencil was placed on a lower, framed metal plate of the Cyclograph 2. An upper frame was clipped over the top 3. The Cyclostyle pen, with its tip being a small metal-spiked or toothed wheel, was used to write or draw on the stencil, punched small holes into the paper and removed the wax coating in those places 4. The upper frame and stencil was then removed and a piece of blank paper was placed onto the metal plate in the lower frame and the upper frame with stencil was replaced 5. A roller was given an even distribution of Cyclostyle ink and rolled by hand over the stencil in the frame. This forced the ink through the holes in the stencil to and made a copy of the stencil on the paper 6. The upper frame was raised, the printed paper removed and another blank sheet was put into place. The whole process was repeated until enough copies were made. Gestetner’s invention developed further in 1894, with a stencil that could be placed on a screen on a revolving drum. The drum was manually rotated, the stencil then wrapped around another drum and was fed between cloth-covered rollers on which ink was evenly spread. Each revolution of the drum forced ink through the holes in the stencil and transferred the ink onto paper that had been fed between rollers and pressed against the drum. The process was repeated for each page. The paper was still fed and removed manually in this earlier invention but became more automatic in later models. In 1902 Gestetner duplicator model 6 was put onto the market. This model included the improvement of an automatic paper feed that synchronised with the rotation of the stencil. The Gestetner machine was the first office printing machine. It was easily installed and it made exact copies of the sane document quickly, effectively and inexpensively. This changed the way offices operated, making information easily available to many more users. The machines were commonly used in small businesses, schools, churches, clubs and other organisations for the wide distribution of a wide variety of information in the form of worksheets, newsletters and more. In 1906 the Gestetner Works were opened in Tottenham Hale, North London, and thousands of people were employed there up until the 1970’s. Due to the fast growing success of the Gestetner Duplicator machines many international branches for sales and service centres were established. David Gestetner was succeeded by his son Sigmund, followed by his grandson’s David and Jonathan. Further advancement was made by using a manual typewriter with specifically designed stencils. The end product was a printed, typewritten copy similar to the print from newspapers and booklets. In the next few years there were further developments of this revolutionary invention. The Gestetner Cyclostyle duplicator in our Collection is dated c.1922 - 1929 and it uses Gestetner Durotype stencils The 1922 British Industries Fair’s catalogue contained advertising for the Gestetner Rotary Cyclostyle “The World’s Premier Duplicator”, demonstrated at Stand K 86.” A Notice at the foot of the advertisement’s page boasts "Important - D Gestetner's latest invention, the "Durotype" Stencil, enables you to obtain 10,000 copies from one original if desired. It contains no wax of any description, is indestructible, can be stored indefinitely and printed from as required” In 1929 the look of the Gestetner machines changed; American designer Raymond Loewy was invited by Gestetner to improve the look of his duplicators, resulting in a very streamlined appearance. Eventually, around 1960’s, offices replaced their Gestetner with small photocopying machines and printers. Gestetner took over ownership of other office machine companies over time, including Nashua, Rex Rotary, Hanimex and Savin and eventually all came under the holding company name of NRG (Nashuatech, Rex Rotary and Gestetner). In 1996 Ricoh acquired the Gestetner Company, and it was renamed the NRG Group. REFERENCES Cyclostyle, Stencil Duplicating Machines, antique Copying Machines, Early Office Museum, http://www.officemuseum.com/copy_machines.htm Duplicating machines, Wikipedia Duplicator, Collection online, Canada Science and Technology Museums Corporation http://techno-science.ca/en/collection-research/collection-item.php?id=1989.0229.001 Gestetner duplicators, Totterham-Summerhillroad.com http://tottenham-summerhillroad.com/gestetner_duplicators_tottenham.htm Gestetner Duplicator, V&A Museum http://collections.vam.ac.uk/item/O322014/gestetner-duplicator-duplicator-loewy-raymond-fernand/ Gestetner, Grace’s Guide to British Industrial History, http://www.gracesguide.co.uk/Gestetner Duplicating machines such as this one revolutionalised access to copies of printed material, changing the way that educational bodies, offices, small businesses and community clubs and charities operated.Duplicating machine, Gestetner Cyclostyle Durotype, a stencil-method duplicating machine with two rotating drums plus rollers. Hand operated, tabletop office machine. Front has folding Bakelite handle, oil filling hole, calibrating gauge with scale, and copy counting meter. Right side has printed manufacturer’s plate that slides out as a paper output tray. Left side has metal plate with protrusions and perforations, plus another similar plate that is detached. It also has a metal frame attached [that would have been used to hold a paper input board, adjusted for various sizes of paper]. Cover, metal, with folding wooden handle on top, attaches to base with metal clips. Inscriptions printed on machine, mostly in gold-coloured paint. Round metal manufacturing plate is stamped with Serial Number 95759. Made by D. Gestetner, London, c.1922-1929Maker’s plate “MANUFACTURED / BY / D. GESTETNER LTD, / No. 95759 / CYCLOSTYLE WORKS / TOTTENHAM HALE / LONDON, N” Copy counting meter shows “1 4 6 4 8 [space]“ copies. Calibrating gauge has divisions with numbers “0 1 2“, labelled “← [left arrow] “TO PRINT LOWER” and “→ [right arrow], TO PRINT HIGHER”. “The Gestetner”, “Cyclostyle”, “Gestetner” (Trade Mark), Right side print of manufacturing details includes “The / Gestetner / TRADE MARK” And “THE FOLLOWING TRAFE MARKS / - - - OF INK, STENCILS / - - - AND GUARANTEE OF PERFECT / - - - BOTH - - - AND MACHINE” and “CYCLOSTYLE / DUROTYPE / GESTETNER” and “D. Gestetner” flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, office machine, copying machine, gestetner machine, duplicating machine, duplicator, stencil machine, gestetner cyclograph company, cyclograph, cyclostyle, d. gestetner ltd, gestetner durotype stencils, gestetner cyclostyle, printing machine, office technology, durotype stencils, david gestetner, raymond loewy, roneo, rotary duplicatorten, mimeo, mimeograph machine, roneograph copier -
Geoffrey Kaye Museum of Anaesthetic History
Equipment - Vaporiser, Penthrane, Cyprane Ltd, c. 1982
This vaporiser has a main cylindrical body with a step up to the dial plate with a small red latch to lock dial in to place.On the front of the body sits a square gauge to indicate the level FULL along with a long rectangular shape.There is an Inlet and outlet valve that sits behind the metal dial.There is a manufacturers plate sitting on top of the dial and the inlet/outlet valve. Inscribed on top plate: KEEP UPRIGHT/ PENTEC 2/ WHEN CHARGED •Inscribed on inlet & oulet valve plate: PENTEC 2/ SERIAL NO 252939/ PATENTS PENDING •MADE IN / ENGLAND BY/ CYPRANE LTD / KEIGHLEY •Metal dial has inscribed: OFF/.2 .5 1 1.5 2 Max •Inscribed on front plate in green writing: USE ONLY/ PENTHRANE/ (METHOXYFLURANE)penthrane, vaporizer, anaesthesia, anaesthetic machine -
Flagstaff Hill Maritime Museum and Village
Tin
Tin metal rectangular cake/bread tin with a metal ring at one end, pitted and rustedflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Flagstaff Hill Maritime Museum and Village
Domestic object - Food Mincer, Enterprise Manufacturing Company, circa 1911
This particular food mincer was manufactured by Enterprise Manufacturing Company. Located in Philadelphia, this company specialized in making hardware products. The company was especially known for its cherry pitters, apple peelers, and coffee mills. The company was founded in 1864 and was located on the corner of Dauphin, 3rd, and American Streets. Enterprise Manufacturing Co. remained in business until 1956 when it was bought by Silex Co.A mass produced early domestic item made for home food preparation this item's first patent design was approved in 1897. Manufactured by a well known company in the USA the "Enterprise Manufacturing Company” up until 1956. They specialised in making kitchen appliances of various types for domestic use and for export. Food mincers of the subject items design are still being produced today under the brand name of "Universal" made by Universal Trading Inc USA.Food mincer, metal, clamp on bench style, with rotating wooden handle. Inscriptions stamped on metal.Marked "Enterprise tinned Meat Chopper" "No. 10" "Enterprise MF'G Co. PHILA. USA" "PAT. JAN.30.83" flagstaff hill, warrnambool, flagstaff hill maritime museum, flagstaff hill maritime village, great ocean road, mincer, food mincer, meat mincer, food preparation, kitchen utensil, domestic object, enterprise manufacturing company, kitchen appliance