Belonged to Kathleen Marjorie Dunn (nee McKenzie)Formal day dress in black crepe. It has a round neck and short set-in sleeves. The front opens from neck to waist and has four self-covered shank buttons. The bodice is slightly gathered at two points front and back. The skirt is gathered centre front with seven rows of shirring. The bodice features six arabesques in black and white beads. The skirt has two false pockets with similar beading. A small vent at the left waist closes with a hook and eye. The dress is machine sewn with a hand sewn turn-up on the hem.Nonecostume, george evans collection

Brown leatherette case containing ladies' sewing kit. Lined with flesh coloured moire silk, gathered pocket containing a sheet of 200 pins, brass thread holder containing 2 reels of silk thread, one shade 677 the other 706. Other half of case has leather strap with 2 packets of Lighthouse brand needles, scissors, thimble, two needles, punch, button hook, one unknown tool, 1loose '30's button, 2 needle cards, one containing 12 safety pins of various colours.Lithgow Sheet, 200 solid headed English Pins. Abel Morrall's Dress and Lingerie Pins. Art Silk Hose Mending, Flora MacDonald Needles are a Pleasure to Use.domestic items, sewing

Framed print of SEC Drawing No. VB4 7184C, "Diagrammatic Arrangement of Feeders and Trolley Wire" for Ballarat, dated 18.9.1958. Framed in a timber brown section with black/gold lining with glass and black paper backing. Framed by N.L. Harvey & Sons, 131 Sturt St. Ballarat. Has eye hooks and metal picture hanging wire on rear to hang print. See Reg Item 4773 for an original coloured marked up print of this plan and 5173 for a scan of the print and hard copy and item 8680 for a high res scan of this drawing.trams, tramways, power supply, feeders, trolley wire, switches

Four-piece wedding outfit comprising bodice, belt, skirt and separate train all made of cream figured wool. The bodice has a centre front ruched panel, stand collar and a fitted two-piece sleeve with full gathered head. It is trimmed with cream-coloured beading with pearl drops. The bodice has seven interior bones and is fastened with metal hooks and hand sewn eyelets which are concealed under the front panel. A separate pleated belt fastens centre back. Plain gored skirt with separate train that ties around the waist.wedding dress, 1890s fashion

First World War Army jacket belonging to Lieutenant Sydney Matthew Callaghan (1892-1976), who served in the Australian Engineers, AIF Canteens Section and the Australian Flying Corps during WWI. Sydney and his family lived at 34 Normanby Street from 1932. His parents lived in Bay Road, Sandringham.First World War Army jacket, khaki with four front pockets. Winged Australian Flying Corps patch above left breast pocket. Lieutenant's insignia on epaulets: two diamond-shaped metal 'pips' and a curving band with the word "AUSTRALIA". Flying Corps colour patch on each shoulder: a pale blue triangle with two small red stripes and a large central darker blue stripe. Metal belt hooks on either side of the waist. The garment has been widened, with a strip of khaki fabric inserted in the centre back.sydney matthew callaghan, australian flying corps, military uniform, first world war

Belonged to donor's aunt1960s navy blue fine silk shantung fabric dress with lace bodice and elbow length sleeves. Metal zip, hook& eye down back. A-line skirt with two front seams and pockets. Dress is below the knee length. Lined from above bust line in bodice with fine blue crepe fabric. Matching jacket of fine silk shantung with lace trim on collar& cuffs of full-length sleeves. Self-covered shantung 4 buttons and stitched buttonholes. La Petite label in jacket and underarm on dress.La Petite Model Frocks, 165 Collins St Melbourne.la petite

Uniform issued to S/SGT "Brian Thompson". Years of service 1973 - 1993. 316221.1. Jacket - white colour polyester/cotton fabric, rolled collar jacket, shoulder epaulettes, top of sleeves, black colour rank badge with gold colour crown and three stripes = Staff Sergeant. Manufacturers label back below collar. 2. Trousers - black colour cotton/polyester fabric with fob pocket and two side pockets. Metal and nylon zipper fly. Red colour wool fabric twin 2 cm stripe down each side seam. Manufacturers label back below waistband. Black colour polyester fabric lining waistband and pockets. Black plastic button inside waistband. 3. Cummerbund - Red colour polyester fabric, broad waist sash with three pleats, metal hook and bracket buckle and hook and loop fastener to adjust lengthy. Black colour polyester fabric lining. Manufacturers label. 4. Bowtie - black colour polyester fabric, pre-tied bow tie with metal clasp. Manufacturers label. 5. Braces - set of white colour cotton elastic braces with metal clips to attach to trousers. Metal slide clips to adjust length and plastic strap joiner.Manufacturers information. 1. Jacket - black fabric label - TETOROM/ 65% POLYESTER/ 35% COTTON/ WIMBLEDON WEAR/ MELBOURNE". White fabric label "97R/ WARM MACHINE WASH/ D NOT BLEACH/ MACHINE TUMBLE DRY/ WARM. WARM IRON." 2. "A.G.C.F./ VICTORIA/ 1987/ ^/ ARMY NO/ NAME" 3. "POLYESTER/ DRY/ CLEAN/ (50c) ONLY" 4. POLYESTER/ DRY/CLEAN/ (50c) ONLY"uniform, army, mess dress, brian thompson

As quoted from Wikipedia, ‘An anvil is a block with a hard surface on which another object is, struck. The block is as massive as it is practical, because the higher the inertia of the anvil, the more efficiently it causes the energy of the striking tool to be transferred to the work piece’. The lightstation’s anvil is a red-painted iron block with a conical beak or horn at one end that was used for hammering curved pieces of metal. It would have stood on a heavy free-standing pedestal, such as a large tree stump, to allow complete access to the item being hammered. Some anvils display the manufacturer’s name in the metal on the side, but this is not the case here, and its age, although unknown appears to be quite old, perhaps c.1900. It appears to have had a lot of use, and although no record of this survives, it is presumed that a forge operated on site for hammering, cutting, shaping and repairing tools such as bolts, nails, hooks, chain segments, pulley blocks, hinges, crow bars, picks, chisels, horseshoes and harness hardware. A hames hook (which forms part of the collar worn by a draught horse) survives at the lightstation as do many other heavy metal tools and pieces of equipment. The anvil is an example of the necessary resourcefulness and self sufficiency practiced by lightkeepers working and living in a remotely located workplace and home, and many of the iron items in the collection may have been repaired or even made on its working surface. As a lightstation manager Chris Richter used the anvil to manufacture pulley blocks for sash windows, repair brass door hinges & sharpen cold chisels, crowbars and picks and other lightkeepers have used this anvil for many fabricating jobs such as manufacturing ducting for the generator room ventilation system."The lightship only came in every three months with supplies and there would have been repairs to do between visits from a blacksmith - who would have had to travel on the ship. Also, the ship was only anchored in the bay long enough to unload supplies and collect and deliver lightkeeping staff – probably not enough time to get much smithy work done – especially if the weather packed it in and the ship had to depart. Lightkeepers in our time had to be self sufficient, resourceful and innovative and I imagine that would have been the case in the past." It has second level contributory significance.Red painted blacksmith's anvil.

Ivory coloured silk bodice. Part of wedding ensemble with matching skirt with train. (11400.513B). The silk fabric has an all over pattern of scattered leaves. The bodice has long sleeves and is fully lined with cotton fabric with a front opening. The cotton lining at the front forms a separate bodice with a front opening fastened with fifteen hooks and eyes from throat to waist. The lining is edged at centre front on both sides with a border of the silk fabric. The border narrows from 7 cm at the throat to 3 cm at the waist. In the lining of the bodice are two casings on either side of the front opening containing boned segments. Across the lining of the back are seven casings containing boned segments. The front LHS of the bodice has an outer layer of silk fabric with a squared neckline. The RHS of the bodice overlaps the centre opening of the bordered lining to attach across the left shoulder. From the left shoulder the front tapers diagonally to the waistline 4cm to the left of centre. This cross over section is fastened with ten hooks and eyes – seven of the eyes are attached to the bodice lining and three are on the LHS outer silk fabric layer. This section crosses full width to the edge of the LH sleeve, across the top of the shoulder to the neckline. The LHS outer section crosses back over the edge of the centre section. There is a third layer on the RHS with a squared neckline to form a symmetrical appearance. The two side sections are edged with ruffles of fine silk ribbon. The centre section of the crossover part has vertical pintucks extending from the throat for 9 cm. The fullness created by the pintucks is gathered to centre front where the waist dips to a shallow V shape. The back of the bodice has vertical pintucks extending 12 cm from across the shoulders, narrowing to a single vertical strip of pintucks (4 cm) ending at centre waist. The waist is edged with a border of silk ribbon with a horizontal tuck. Inside the back of the bodice above the waist cotton tape ties are attached. These ties extend to the front of the bodice and the ends are fastened with a metal buckle. On this cotton tape at centre back there are to metal hooks for attaching the skirt. Attached to the neckline of the front section of the bodice is a 7 cm stand up collar. The collar extends from the RH shoulder in front of the neck and across the LH shoulder and continues unattached around the back of the neck to attach to the edge of the collar at the RH shoulder. The edges of the collar are fastened with three hooks and eyes. The collar has three full width horizontal pleats and the top edge is trimmed with a frill of fine gathered silk ribbon. On the waistline at centre front and centre back are decorative buttons (3.5 cm) of pearl coloured beads. The buttons have a centre pearl bead bordered by small glass beads surrounded by 9 smaller pearl beads and nine small pearl beads. Each button is edged with a row of tiny class beads with 18 points. The long sleeves are fully lined and made of two sections. The underneath section of the sleeve is ungathered and shaped at the elbow. The upper section of each sleeve is gathered at the shoulders and attached to the underneath section with a series of small pleats down to the elbow creating fullness. There is a small cap sleeve at each shoulder over the top of the gathered sleeve. The cap sleeves are edged with a frill of gathered silk ribbon with a decorative row of gathered silk ribbon parallel to the edge. At each wrist is a gathered frill of silk fabric edged with silk ribbon. Each sleeve has an 8 cm split at the wrist on the back seam. Full length ivory coloured silk skirt. The silk fabric has an all over pattern of scattered leaves. The skirt is fully lined with cotton fabric. The skirt is made of 5 pieces. The centre front panel has two darts at the waistline. The two side panels are cut on the bias and wrap around to form a centre back seam gathered into the waistband and finishing 44 cm below the waist line. Two triangular pieces of fabric are inserted at the back below the centre seam to complete the full circle of the skirt. There is 30 cm back opening. The waistband is made of cotton tape (3cm) fastened with two hooks and eyes with a 2 cm crossover. There is another hook and eye fastener halfway along the opening split. There is one upward facing hook on either side of the centre back opening to attach the matching bodice. The LHS of the back opening has a cotton fabric pocket inserted along the seam. The hem of the skirt is edged with two 5 cm frills of gathered silk fabric.costume, female daywear, silk bodice

These trousers are part of a Disruptive Pattern Combat Uniform issued by the Australian Airforce to Bernard Farley during service. This uniform type was used in base and field activities and was replaced in 2014 by the General Purpose Uniform as the uniform worn during general base duties and in non-warlike environments.This item has social significance, as an item of uniform worn by Warrnambool RSL community member and Secretary (2019), Bernard Farley during service with the Australian Airforce. The item is a representative example of previously standard issue Airforce uniform and is in excellent condition. As a set, the uniform has aesthetic significance in it’s design, incorporating the Disruptive Pattern style of camouflage which has its roots in the 1980s and continues to be adapted into uniform design by the Defence Force.Disruptive Pattern trousers in five colours of green and brown. Long pants with elasticised drawstring fastener at ankle and velcro adjustment fasteners at the waist. Pants take a straight leg style and bears several pockets: two thigh level pockets with zippered horizontal opening, two open hip pockets on the front, one open pocket on the reverse right hand side with blue plastic button fastener. Five large belt loops encircle the waist and there is a zippered fly, secured at the top with a blue plastic button.Label on interior front right of trousers reads: “A13/ADA/VICTORIA 2008/(broad arrow)/SPECIFICATION ARMY (AUST)6542/NSN: 8415 66 152 1059/SIZE: 95 S/NAME/SERVICE NO/75% COTTON 25% POLYESTER/WARM MACHINE WASH 40*C/RINSE WELL, WARM IRON/DO NOT IRON OVER HOOK AND PILE/DO NOT BLEACH/DO NOT STARCH/MAY BE TUMBLE DRY 40*C/MADE IN AUSTRALIA” The name “FARLEY” is also handwritten on the back interior waist band of the trousers. camouflage, general purpose uniform, airforce, uniform, australian defence force

See Marriage Cert in Marriages File 1840-1885 Also Details in Simpson File Belonged to Johanna Simpson married Thomas Draffin on 17th Feb 1880 Presbyterian Church Stawell Silk Taffeta lined wedding dress. Ruffled collar. 18-inch waste. Full length sleeve. Ruched band on upper sleeve. Lower sleeve band attached with matching silk piping which extends into the band as decoration. Garment shaped with two long darts on either side of opening. Opening from neck to below hip uses metal hook and hand sewn eye closing. Lower dress in three sections. Top section is plain matching material attached to the upper garment with piping. Second panel is Ruched material the same material as upper garment. Third lower panel is same material as upper garment consisting of three bands of finely pleated material. Back has pocket on right hip with two pointed flaps and central pleated panel. Back has a Central Bustle extending from back hip to hem. Light Brown with pleated frills at bottom Miss Annie Draffin Mothers Wedding Frock 1880

According to the Australian War Memorial, artillery were known to have used such leggings during the First World War, as were more well known units such as the Australian Light Horse.Brown leather cylindrical shaped legging with two leather straps for fastening. One strap is attached to the lower edge of the interior with a press stud. This crosses over the lower exterior and passes through a leather loop at the front. The strap then wraps around the legging and passes through a second leather loop at the front. This strap, along with a shorter strap that is sewn into the top of the gaiter, passes through a buckle and is tucked under two final leather loops. Interior length of gaiter is stamped with manufacturer's name. Top of gaiter also carries a small metal hook, presumably to hold layers together firmly.Manufacturer's stamp "J OAKMAN/1939" on side "[broad arrow]/NB", the size "15" is also stamped.legging, uniform, world war ii, second world war, world war 2

According to the Australian War Memorial, artillery were known to have used such leggings during the First World War, as were more well known units such as the Australian Light Horse.Brown leather cylindrical shaped legging with two leather straps for fastening. One strap is attached to the lower edge of the interior with a press stud. This crosses over the lower exterior and passes through a leather loop at the front. The strap then wraps around the legging and passes through a second leather loop at the front. This strap, along with a shorter strap that is sewn into the top of the gaiter, passes through a buckle and is tucked under two final leather loops. Interior length of gaiter is stamped with manufacturer's name. Top of gaiter also carries a small metal hook, presumably to hold layers together firmly.Manufacturer's stamp "J OAKMAN/1939" on side "[broad arrow]/AG", the size "15" is also stamped.legging, uniform, world war ii, second world war, world war 2

The donors of the fur stole come from a local family in the Warrnambool area. They believe the fur stole is around 60 years old. The stole belonged to the donor’s mother, now deceased, who wore it to local balls and dances as an accessories and maybe for warmth too! The donors believe the fur could have been purchased in Melbourne or Toorak. The fur is likely to be from the Mustelidae family, which is the largest family of carnivorous mammals. They inhabit all continents except Australia and Antarctica. This species includes the weasel, badger, otter, marten, ferret, sable, mink, stoat (ermine) and wolverine. The fur is thick and dense close to the skin, indicating that it is the winter coat of the animal. This fur collar is representative of fashion accessories in Warrnambool and District in the 1940's - 1950'sFur stole, ladies; comprising two animals with heads and legs, stitched together to form a stole. The fur is believed to be the winter fur of animals from the mustel family and is not as soft as rabbit fur. The first head has only the nose, the second head has nose and eyes. The heads are dark brown, each animal has a dark brown stripe the length of its fawn coloured back. Tails are dark but not as dark as the head. The stole can be clasped together using a decorative knotted brown tie and hook, or by using the clip attached to the snout of the front animal. 1940-s - 1950s.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, mustelidae fur stole, mustel fur, fur stole with body head and legs, fur stole made with animals, ladies clothing, fashion accessory of 1950’s, fashion of south west victoria

This commemorative badge identifying the wearer as a Girl Guide and was used in the 1970's and later. The Girl Guides "World Camps" was founded in 1924 and each subsequent "camp" was in other global countries. The Camp Baree was held in 1947/1948 in Pennsylvania in the USA. In Victoria, Australia, a Barree Regional location for Girl guides, encompasses the Kiewa Valley and its regions. Girl guides in rural areas covered the same developmental programs as in the city areas but the bush settings of annual camps did not have the same impact as for city based guides. The comradeship however, bringing together girls from a widely diverse background, was still a very important objective of the Girl Guide movementThe significance of this badge is that the Girl Guides held a World Camp in the Barree region which included the Kiewa Valley.This world wide attention(Girl Guides) to this region paid special attention to the "home side" girls and highlighted in particular those girls in the Kiewa Valley who participated in the Girl Guide movement. The ability to have such a personal contact with so many girls from so many world regions helped to break the somewhat isolated regional life. The fundamental lessons of the girl guides was and still is to enrich young girls knowledge of skills which provides self esteem, pride in achievements and the togetherness with like minded girls. Social barriers are left behind and good friendships are formed. Some of these friendships continued as life long links.This round badge made from brass and has coloured enamel sections outlining various "Barree Region" scenery. In the far distant horizon are snow capped mountains. These are coloured brown with white tipped summits.The central focus is a blue stream with a dark blue "gum" tree to the left and a brass etched tent pegged onto green grass. These pictures are framed within a house structure. A red coloured boomerang lies under the "house" frame with the name of the region on it,"BARREE REGION" The badge is fastened onto a lapel or other clothing by two "L" shaped hooks extending from the back of the badge.On the front of the badge (on the sketched boomerang "BARREE REGION". On the back in raised lettering is"BERTRAM BROS MELB."societies, girl guides, barree region, metal identity badges

Wedding dress and veil worn by Margaret Vyner at her wedding to Ian McKendrick on 11th January 1958The McKendrick family came to Mt Beauty very early in the Kiewa Hydro Electric Scheme (KHES) days. Their son, Ian, worked in the Mt Beauty Post Office for 40+ years. The Vyner family were long time employees of the SECV working on the KHES and were residents of Mt Beauty. Margaret was a nurse at the Tawonga District Hospital at the Tawonga site and at the Mt Beauty site.Long soft white taffeta under-skirt. The outer is cut on the cross, made of nylon and with a train and has appliqued lace of a flower and is beaded. The sleeves are long and shear. The taffeta bodice is fitted with a featured V waistline. The sleeves are pointed (to cover over the hand) with a flower applique. There are 5 pearl buttons down the back and are fastened with loops. The side zip is metal and on the right hand side and at the top there is a hook and eye. The bridal veil - A large tulle circle edged with lace and formed into a 2 tiered veil held together with a green covered wire circlet decorated with wax flowers.vyner family, mckendrick family, wedding dress with veil

This pair of brass binoculars was presented to Tom Pearce in recognition of his heroic efforts at the wrecking of the Loch Ard and saving Eva Carmichael. They were presented to him by the Lady Mayoress of Sydney on 27th July 1878 on behalf of the colonists of New South Wales "In recognition of his gallant conduct on the occasion of the wreck of the Loch Ard". Tom (Thomas) Pearce was born in Ireland in 1859 and arrived in Melbourne two years later; he considered himself as Australian. Before sailing on the Loch Ard he had been at sea for three years as an apprentice sailor and had already experienced one shipwreck. Tom was on the deck of the Loch Ard with Captain Gibb throughout the night of May 31st 1878. It was mistakenly thought they were 150 miles (240 km) southwest of Cape Otway. By 2:00 am on June 1st, the wind was blowing "pretty fresh" but a thick haze remained and, when it eventually cleared, the land was so close the unsuccessful battle to save the Loch Ard began. After the ship struck Mutton Bird Island Tom and five others were sent to the lifeboats. Conditions were very dangerous as waves broke over the decks and they were all washed away. Tom found himself in the stormy waters and under a lifeboat, which had also been washed into the sea. After being swept into the gorge Tom left the boat and swam into shore; he was alone. Eva Carmichael, a passenger on the ship, had been snatched from her bed just before dawn and into the chaos, confusion and terror of the shipwreck, with rigging and rocks raining down. Thrown into the sea, she afterwards said: "God taught me to swim in my distressful plight, for I never swam before". Clinging to a spar, she was swept into the gorge and saw Tom Pearce walking along the beach. Upon hearing the cries of Eva, Tom swam out and with great difficulty brought her to the shore and placed her safely in a cave where he made a bed of grass and shrubs and gave her brandy to revive her. She sank into exhausted unconsciousness. Tom then scrambled to the top of the high cliff and after walking for some time he stumbled upon workers from Glenample Homestead. They rode back to the homestead for help but Tom insisted on returning to Eva. When Eva awoke she found herself alone, "cold, weak and terrified with the wild waves before me, and caves and cliffs around me" and upon hearing strange noises, which she imagined to be made by the local indigenous people, she hid. The noises were made by the rescue party from Glenample Homestead. After eventually discovering Eva they hauled her up the cliff in the darkness of night, “a work of great difficulty and danger” and took her to Glenample. Sadly, Tom and Eva were the only survivors of the 54 people on board the Loch Ard. Tom’s rewards for his bravery included the Gold Medal of the Humane Society, a gold watch and £1000 from the Victorian Government, a set of nautical instruments, (which included the binoculars) from the people of Sydney and £60 from the people of Warrnambool. He was also presented with a Bible by a “Friend of the Loyal Orange Institution of Victoria, Protestant Hall Melbourne” in August 1878. Coleman Jacobs composed the music "The Young Hero Schottische" and dedicated it, by permission, to Mr Thomas R. (Tom) Pearce. The sheet music was published in 1878 by Mr Roberts, professor of dancing and was on sale for 3/- (3 shillings) in aid of the "Loch Ard" fund. Tom Pearce went on to join the Loch Sunart on her return to England, only to be wrecked again off the Irish coast in January 1879. Tom left the Loch Line in 1883 and the following year married Edith Gurney Strasenbergh, the sister of his friend Robert who had died on the Loch Ard. They had three children, unfortunately, two of the male children were to die at sea. In 1895 Tom obtained his first command as Master of The Larne, a vessel with the Royal Mail Steam Packet Company. He remained with the company until he died in Southampton, England, on 14th December 1908. Tom Pearce never saw Eva Carmichael after he had fare welled her some 30 years before. Eveline Victoria Berta Carmichael was born in 1859 in Mountrath, Queens County, Ireland. After recovering from her ordeal in August 1878 Eva returned to Ireland and in 1884 married Thomas Achilles Townshend, a Civil Engineer. They had three sons, all of whom had successful military careers, and when Eva’s death notice appeared in the Melbourne Argus It read. "Townshend on 8th April 1934 aged 74 at her residence in Bedford, England, Evaline Victoria, widow of the late Thomas Archilles Townshend, C.E. of Co. Cork, Ireland. Mrs Townshend was the Eva Carmichael who, with the late Tom Pearce, were the only two survivors of the ship Loch Ard, which was wrecked near Port Campbell on June 1st 1878." The binoculars are significant for their association with the wreck of the Loch Ard and the only two surviving members of that wreck Tom Pearce and Eva Carmichael. Flagstaff Hill’s collection of artefacts from Loch Ard is significant for being one of the largest. The shipwreck of the Loch Ard is of significance for Victoria and is registered on the Victorian Heritage Register ( S 417). Flagstaff Hill has a varied collection of artefacts from Loch Ard and its collection is significant for being one of the largest accumulation of artefacts from this notable Victorian shipwreck. The collections object is to also give us a snapshot into history so we can interpret the story of this tragic event. The collection is also archaeologically significant as it represents aspects of Victoria's shipping history that allows us to interpret Victoria's social and historical themes of the time. The assemblage of items from the wreck is of historical significance in that they are associated with the worst and best-known shipwreck in Victoria's history. Pair of brass marine binoculars in a wooden box On the left hand eye piece, on the underside, is an engraved inscription and another engraved word. On the right hand eye piece there is another small inscription and on the underside there is a small green mark. The binoculars have a pattern of embossed tiny circles on the outside. Some of the patterning is very shiny due to wear and rubbing, there is a brass ring on the underside of the binoculars for the attachment of a lanyard. The wooden box has a hinged lid and on the front of the box in the centre is a lock, and at either end are two hooks and eyes. The box is split across the top for about 3/4 of the length. Marking on the left underside reads, 'Presented on behalf of the Colonists of New South Wales By the Mayoress of Sydney on 27th. July 1878 to Mr Thomas B Pearce. In recognition of his gallant conduct on the occasion of the wreck of the "Loch Ard"'. Underneath this inscription is engraved 'Sydney'. On the other eye piece is engraved what looks like 'Mac Donnell & Co' binoculars, flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, loch ard shipwreck, tom pearce, thomas r pearce, eva carmichael, mutton bird island, loch ard survivor, loch ard hero, coleman jacobs, the young hero schottische, photograph of tom pearce, glenample homestead

This Bosun's char was part of the equipment on the vessel 'Reginald M. It is typical of items included on board a vessel in the late 19th and early 20th century. The nautical word 'bosun' is an abbreviation of the word 'boatswain' who is the person responsible for the repair and maintenance of the vessel. It could be used when rigging the sails and for rescue at sea, along with a thick rope anchored on shore or a rope between ships. It could also be used to move passengers to and from a ship as well as cargo on, to and from the vessel. A bosun's chair is a simple piece of equipment made from a short plank of wood and a sturdy piece of rope. It looks a little like a child's swing but usually has a pulley system that allows the user to adjust the length of the hanging piece of rope, and in so-doing adjusts the height above the floor or ground or sea. In modern times a harness would also be worn by the bosun’s chair user for safety reasons. Bosun's chairs are also used by window cleaners, construction workers and painters. The bosun’s chair is sometimes just a short plank, or even a canvas sling. The REGINALD M - The vessel “Reginald M” was a two-masted coastal ketch, owned and built by Mr. Jack (John) Murch of Birkenhead, Port of Adelaide, South Australia. Its construction took approximately 6 months and it was launched at Largs Bay in 1922. The vessel had many owners and adventures over the years until it was purchased by Flagstaff Hill Maritime Museum & Village in 1975 from the Melbourne Ferry Company at auction. It was then used as an active display until 2016. Visitors could go aboard, turn the ship's wheel, go below deck and get the feel of the captain's quarters, sailors' quarters and the storage space available. The Reginald M was a popular exhibit for young and old, until 2016.This bosun's chair is significant for its connection to the maritime history. It has been used for rigging, painting, maintenance and importantly for life saving and safety. The bonus's chair is also significant because of its connection to the history of the vessel REGINALD M, the coastal trading ketch from South Australia built in 1922 and in existence until 2016. Its flat bottom, single chine shape illustrates a very simple but robust method of construction, compared to other round bilged examples of trading vessels. The Reginald M is listed on the Australian Register of Historic Vessels (ARHV Number: HV000562.)Bosun's chair; seat is a rectangular plank of wood with a hole drilled in each corner and three reinforcing wood lengths attached below the plank. The ends of two looped thick ropes have been threaded through the holes in the plank, crossed over then spliced together. The loops of rope above the plank have been tied with light rope. A roughly made wire hook is attached at the base of one length of rope. Top surface reveals indents where the bottom wooden pieces are joined to the top and some of the metal fixtures can be seen along the edge. There are remnants of white paint on the top.flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, bosun's chair, bosuns chair, boatswains chair, rigging, maritime equipment, bosun's seat, life saving, marine technology, ship rigging

In 2010 the University of Ballarat celebrated 140 years of technical education on 26 October.Blue and white soft covered book featuring an image of three men and a woman. Contents include: David Battersby, Catherine King, Robert Hook, Jannine Bennett, Clare Gervasoni, Geoffrey Blainey, Robert H. T. Smith, charter, honorary doctorate Wai Man-Woo, David Suzuki, beer awards, Equine Centre, Science and Engineering Building, Aboriginal Education Centre, E. J. Barker Library refurbishment, Ashley Toth, Golden Key, Indigenous Education, William Harvey, Robyn Brandenburg, Diane Clinging, David Gao, Bronwyn Blaiklock, UB Technology Park, university of ballarat, ballarat school of mines, annual report, 2010, anniversary, 140th anniversary, david battersby, catherine king, robert h.t. smith, ted lovett, shirley morgan, tim stares, e.j. barker library refurbishment, geoffrey blainey research centre, geoffrey blainey research centre opening, geoffrey blaing, e.j. barker, ashley toth, tom gleeson, graeme hood, bronwyn blaiklock, robyn brandenberg, diane clingin

Edwardian black lace long skirt. Four layers. Top layer of black lace in three panels. Top and bottom panels gathered centre panel flat seamed scalloped hem line. Second and third layers of black net with cut edges. Fourth layer of black satin. Skirt gathered onto 7cm waistband of black shantung. Thirty three cm split from waist at the back. Back fastening at waist overlapping with three hooks and eyes and two press studs. Purchased at an antiques store in Camberwell in 1970's. No provenance. Machine made.costume, female evening, black lace and satin skirt

Black cotton with all-over gold paisley type floral patterning. Fully lined with brown cotton fabric. A slight train at the back hemline, and two V shaped flaps-one either side of the back opening, which probably accommodated bussell-like padding. The skirt is tightly gathered at the back to facilitate the padding. Front of skirt is flat, with a little easing of gathers. Pocket inside right hand side seam. A dark brown corded piping edges the hemline. Two metal hooks and eyes, fasten the waistband. Relocated to Clothing Box 176 10.2.2022costume, female, long black and gold patterned skirt

Sir Frederic W. Hewitt (1857-1916), an accomplished and well respected English anesthesiologist, was an expert in the function and use of the Clover Ether Inhaler. In 1901, Hewitt described his modification of the Clover Inhaler. Often referred to as the Hewitt Wide-Bore Inhaler, Dr. Hewitt introduced changes in order to make it easier to breathe through the device and improve the ventilation of oxygen and carbon dioxide. In 1901, Hewitt was recruited to anesthetize King Edward VII for emergency abdominal surgery. This was just a day or so before the new King was to be coronated. He recovered well, and Hewitt became the first anesthesiologist ever to be knighted. (Source: Wood Library Museum)Tall black round topped box with brass hooks at the sides and brass hinges at rear. There is a brown fabric handle on the top. The box has red padding inside the lid and red lining inside the base and sides. There is a round section in the base of the box for holding the round clear glass bottle for ether. There is also a ellipse-shaped metal inhaler on small metal base with a thin metal handle and pipe with bakelite plug attached via a small metal chain. A brown mask is made of brown leather and celluloid which is connected to the inhaler. There is a metal ether measure for pouring the ether.On notecard in box: (B) HEWITT'S INHALER 1895, MADE BY GEO. BARTH & CO LTD., ADVERTISED AS THE SOLE MAKERS OF THE INHALER AND RECOGNISED BY HEWITT IN HIS TEXT BOOK - ANAESTHETICS AND THEIR ADMINISTRATION - AS THE MAKER OF HIS INHALER. / GIVEN BY DR. E.S. HOLLOWAY IN 1951, WHO ACQUIRED MUCH OF HOWARD JONES' EQUIPMENT AFTER THE LATTER'S DEATH. Stamped on underside of glass bottle in a circle: WUBW [illegible] Blue sticker on inhaler: O.2.13. Printed on inhaler under handle: Geo Barth [illegible] / SOL [illegible] Printed on body of inhaler: Full Printed on body of inhaler: 1/2 Printed on inside of leather mask: F35hewitt, sir frederic, jones, howard, inhaler, geo. barth & co. ltd., ether

According to the UK National Archives, the firm F. C. Chamberlain & Co. was founded by Frederick Chamberlain, who made boot uppers at West Street, Wellingborough, in 1891. In 1903, he had moved to Mill Road, and by 1903, was established in Palk Road, producing boot uppers, leggings and gaiters by 1919. These gaiters are therefore presumed to be an early example of products produced by the company.Brown leather cylindrical shaped gaiter with two leather straps for fastening. One strap is attached to the lower edge of the interior. This crosses over the lower exterior and passes through a leather loop at the front. The strap then wraps around the gaiter and passes through a second leather loop at the front. This strap, along with a shorter strap that is sewn into the top of the gaiter, passes through a buckle (now missing) and is tucked under two final leather loops. Interior length of gaiter is stamped with manufacturer's name. Top of gaiter also carries a small metal hook, presumably to hold layers together firmly.Embossed manufacturer's name, "F.C. CHAMBERLAIN & CO/1913"legging, gaiter, f c chamberlain & co, first world war

According to the UK National Archives, the firm F. C. Chamberlain & Co. was founded by Frederick Chamberlain, who made boot uppers at West Street, Wellingborough, in 1891. In 1903, he had moved to Mill Road, and by 1903, was established in Palk Road, producing boot uppers, leggings and gaiters by 1919. These gaiters are therefore presumed to be an early example of products produced by the company.Brown leather cylindrical shaped gaiter with two leather straps for fastening. One strap is attached to the lower edge of the interior. This crosses over the lower exterior and passes through a leather loop at the front. The strap then wraps around the gaiter and passes through a second leather loop at the front. This strap, along with a shorter strap that is sewn into the top of the gaiter, passes through a buckle (now missing) and is tucked under two final leather loops. Interior length of gaiter is stamped with manufacturer's name. Top of gaiter also carries a small metal hook, presumably to hold layers together firmly.Embossed manufacturer's name, "F.C. CHAMBERLAIN & CO/1913"legging, gaiter, f c chamberlain & co, first world war

Used on a farm in the late 19th or early 20th century.A pair of brass horse hames with a missing chain link at the top. Each has a hook attached with a metal ring at the end. It has four rings. It would have been attached to a horse collar and used to to distribute the load around a horse's neck and shoulders when pulling a wagon or plough. The collar often supports and pads a pair of curved metal or wooden pieces, called hames, to which the traces, which attach to the wagon or plough, of the harness are attached. The collar allows the horse to use its full strength when pulling. It was used in the late 19th or early 20th century.horses, horse accessories, harness, animal accessories, farm equipment, hames

The Coolgardie safe was invented in the late 1890s on the Western Australian goldfields. Its invention was credited to a local contractor named Arthur Patrick McCormick. It was a practical system to preserve food prior to modern refrigeration. The wire grid kept the food safe from vermin and allowed breeze to blow through. It was often covered with wet hessian so that as the breeze circulated the water evaporated, creating the same concept as coolant in modern refrigerators and ice boxes. In most respects it was a variation of the bushman’s hessian bag hanging in a tree. In larger towns and cities during this time period large "ice works" could deliver block ice to areas that required a form of refrigeration. These ice blocks where held in early refrigerators to keep perishables cool. In isolated or rural households, the Coolgardie or meat safe was the next best, practical solution for food preservation. This safe was used in the home of the Conway family in Wodonga.This item is very significant to the Wodonga region as it represents the initiative and problem solving skills of the early settlers. It also reflects the primitive conditions in which they lived before the arrival of more modern services such as electricity.Meat safe or Coolgardie safe manufactured in Australia. This safe is made from metal and has been painted in green paint. 2 sides of the safe have a pattern of 6 squares of holes to allow for ventilation and air flow. The holes would also guard against insects and other vermin. There is one shelf inside, dividing it into 2 sections. The safe has a hook attached so that it can be suspended, often from a tree or on a verandah to increase air flow. The safe would often be covered by wet hessian to promote further cooling and preservation of foods such as milk, butter and meat.coolgardie safe, food preservation, pioneers innovation

This piano was made by Aucher Freres of Paris, said to be famous for its pianos in the mid-late 1800s. Aucher Freres (Aucher Brothers) produced a model of piano that was built specifically for use on sailing vessels, the upright yacht-style piano. Pianos were amongst the domestic goods brought to Australia by many colonial immigrants. They were also imported by Australian distributors by the shipload and sought after by settlers. A piano was often found in a Missions to Seamen club room, where visiting seafarers would entertain or be entertained by music and song as part of their relaxation in port. A sarcastically written news article of January 2nd 1869 reported that the Secretary of the Loyal Liberals of Ballarat, Mr Henry Bell, was presented both with a “illuminated address” and a piano. The piano was made by Aucher Freres of Paris and was purchased for sixty guineas (which converts to around $7,500 Au in 2019). The gift was criticised for encouraging foreign industry rather than native Australian products, thus going against what the Loyal Liberals own protectionist policy. The writer goes on to state that several pianos made in the Colony compared very favourably at the International Exhibition with those manufactured by the English or French. He then says that “… the secretary … might learn a lesson from his piano ... the name Aucher Freres, Paris emblazoned on its front should be … a perpetual reminder of the hollowness of that protectionist imposture …” [Refer to Intercolonial News, Victoria, originally published in The Argus, was repeated in the Wallaroo Times and Mining Journal of South Australia 2-1-1869.] Aucher Freres pianos were still around in 1930. A second-hand model was advertised for sale as a good practice piano. The advertisement was placed by the Mount Gambier, SA, agents for Saver’s Pianos Ltd of Adelaide. The piano was described as “a sound little instrument of good tone and appearance”. The asking price in November 1930 was 32 pounds and ten shillings (which converts to about $2,500 Au in 2019). [Refer to Savery’s advertisement, Mt Gambier Border Watch 11-11-1930]This piano is significant for its connection with the time period of chapel and club room at Flagstaff Hill's St Nicholas Seamen's Church. It represents the form of entertainment enjoyed by seafarer's world wide, which is appropriate for a maritime village. The maker of the piano is famous for its quality pianos of the 19th and early 20th century.Piano, upright, polished wood. The wooden hinged keyboard cover lifts up to allow access to the keyboard. The piano also has two brass candlesticks. The top of the piano is hinged and lifts up to allow access to the piano mechanic's inside for tuning and maintenance. The inside flap has a music stand incorporated into it. It also has the usual two hard-soft pedals at the base. There are two brass decorated hooks at each end to allow for ease of movement when the position of the piano is changed. Maker's name inscribed inside keyboard lid in gold lettering. Made in Paris by Aucher Freres (Aucher Brothers)."AUCHER FRERES / Paris" (NOTE: the "C" is sometimes mistaken for a "G")flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, piano, music, upright piano, paris, france, aucher freres

Used to weigh bulk produce in the Tawonga Store. Part of a platform scale.Historical: Imperial weights used before packaging of goods. Tawonga Store opened c1920 selling produce for the farming community of the Kiewa Valley.5 circular cast iron weights with a slot from the edge towards the centre. Each has a ridge around the circumference to enable each to fit on top of a bigger one. On the top, above the slot, the weight is embossed. The set is held together with a piece of wire about 50 cm long. The set fit on to a holder which has a circular hook for hanging and a long straight cast iron rod going through a solid half sphere which is held with a nut at the base. The half sphere has a wider circular base for weights to sit on. Used with scales (KVHS 0800 (B)) to weigh goods sold at Tawonga Store.Weights: 14 lbs; 28 lbs; 56 lbs; 1 cwt; 2 cwt.weights. scales. shop. store. tawonga store.