Sign regarding the operation of a Melbourne suburban train door that has been fitted with power closing doors, three colours, adhesive back with the name of the manufacturer "JBC" on the rear. Has two sheets of paper split in the middle that protected the sign until use. Possibly dates from the time of the introduction of power doors on Harris Trains.trams, tramways, victorian railways, melbourne

Demonstrates a tramcar badge of a W2 class tram.Metal badge - relief of a Melbourne W2 tram No. 331 with a green, cream and brown enamel painted areas. Has a pin clip on the rear. Tram has route No. 8 and destination of City. No manufacturer details. See Reg Item 5917 for possibly a tie clip featuring the same tram. Two copies held - second without the clip.trams, tramways, badges, w2 class, route 8, souvenirs, tram 331

Dr Geoffrey Kaye was a clinical anaesthetist at a time when very few full time anaesthetists existed. He was passionate about the training of future anaesthetists and would often section anaesthetic equipment to reveal its inner workings and show those to students. This Probyn Williams Inhaler is one apparatus which has been sectioned and the various elements of the inhaler have been painted to highlight the differences in function.Oval shaped metal inhaler with attached metal facemask. The inhaler has been sectioned to reveal its inner workings and the ether chamber has been painted black while the air-channel has been painted red. The manufacturer's logo, stamped into the inhaler, has been sectioned as well, leaving only half the information available.Engraved on dome side of inhaler: PROBYN WILLIAMS / G.K. sect. 1939 •Stamped into dome side of inhaler MAYER & / LONanaesthesia, anaesthetist, inhaler, ether, medical history

A mass produced utilitarian item made for domestic use no history or manufacturing provenance currently available. Over 1500 pottery firms have operated in Stoke-on-Trent since the early 1700's - Some lasted only a few years and some for well over 200 years. Some potters built and owned their own works. Many others were tenants in works built by others and a succession of potters occupied the same works. It was also a common practice for a works to be split between two different pottery companies or for a larger manufacturer to let out a smaller section of his works to a potter who would make wares which were not of interest to the pot works owner. Some potters purchased 'blanks' from other manufacturers and put their own decoration on them some items have two back stamps some have no marks at all. This adds to the confusion and frustration of trying to trace details of a particular manufacturer such as the subject item.Item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset given it was produced before 1950.White earthenware bowlNoneflagstaff hill museum, shipwreck coast, ironstone pottery, earthenware, bowl

This object and the set of five items is believed to have been made in or around the Staffordshire area in the United Kingdom. Over 1500 pottery firms have operated in Stoke-on-Trent since the early 1700's - Some lasted only a few years and some for well over 200 years. Some potters built and owned their own works. Many others were tenants in works built by others and a succession of potters occupied the same works. It was also a common practice for a works to be split between two different pottery companies or for a larger manufacturer to let out a smaller section of his works to a potter who would make wares which were not of interest to the pot works owner. Some potters purchased 'blanks' from other manufacturers and put their own decoration on them some items have two back stamps some have no marks at all. This adds to the confusion and frustration of trying to trace details of a particular manufacturer such as the subject item.The subject item at this time cannot be associated with an historical event, person or place, provenance regards manufacturer is unknown, item assessed as a collection asset as it is believed to have been produced before 1950.Ewer or jug, cream ironstone with brown flower spray floral decoration.(Part of 5 piece set containing ewer, bowl, brush vase, soap dish lid and soap dish)Noneflagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, porcelain container, toilet container, beauty container, ceramic, decorative object, pottery object

This object and the complete set of five items is believed to have been made in or around the Staffordshire area in the United Kingdom. Over 1500 pottery firms have operated in Stoke-on-Trent since the early 1700's - Some lasted only a few years and some for well over 200 years. Some potters built and owned their own works. Many others were tenants in works built by others and a succession of potters occupied the same works. It was also a common practice for a works to be split between two different pottery companies or for a larger manufacturer to let out a smaller section of his works to a potter who would make wares which were not of interest to the pot works owner. Some potters purchased 'blanks' from other manufacturers and put their own decoration on them some items have two back stamps some have no marks at all. This adds to the confusion and frustration of trying to trace details of a particular manufacturer such as the subject item.The subject item at this time cannot be associated with an historical event, person or place, provenance regards manufacturer is unknown, item assessed as a collection asset as it is believed to have been produced before 1950.Wash bowl with scalloped edge cream ironstone with brown flower spray decorations & part of 5 piece set. (ewer, brush vase, soap dish & lid)Noneflagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, porcelain container, toilet container, beauty container, ceramic, decorative object, pottery object

This object and the complete set of five items is believed to have been made in or around the Staffordshire area in the United Kingdom. Over 1500 pottery firms have operated in Stoke-on-Trent since the early 1700's - Some lasted only a few years and some for well over 200 years. Some potters built and owned their own works. Many others were tenants in works built by others and a succession of potters occupied the same works. It was also a common practice for a works to be split between two different pottery companies or for a larger manufacturer to let out a smaller section of his works to a potter who would make wares which were not of interest to the pot works owner. Some potters purchased 'blanks' from other manufacturers and put their own decoration on them some items have two back stamps some have no marks at all. This adds to the confusion and frustration of trying to trace details of a particular manufacturer such as the subject item.The subject item at this time cannot be associated with an historical event, person or place, provenance regards manufacturer is unknown, item assessed as a collection asset as it is believed to have been produced before 1950.Brush Vase with scalloped edge cream ironstone with brown flower spray decorations & part of 5 piece set. (ewer, bowl, soap dish & lid)Noneflagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, porcelain container, toilet container, beauty container, ceramic, decorative object, pottery object, brush vase, bowl, ewer, pottery

This object and the complete set of five items is believed to have been made in or around the Staffordshire area in the United Kingdom. Over 1500 pottery firms have operated in Stoke-on-Trent since the early 1700's - Some lasted only a few years and some for well over 200 years. Some potters built and owned their own works. Many others were tenants in works built by others and a succession of potters occupied the same works. It was also a common practice for a works to be split between two different pottery companies or for a larger manufacturer to let out a smaller section of his works to a potter who would make wares which were not of interest to the pot works owner. Some potters purchased 'blanks' from other manufacturers and put their own decoration on them some items have two back stamps some have no marks at all. This adds to the confusion and frustration of trying to trace details of a particular manufacturer such as the subject item.The subject item at this time cannot be associated with an historical event, person or place, provenance regards manufacturer is unknown, item assessed as a collection asset as it is believed to have been produced before 1950.Soap dish cream ironstone with brown flower spray decorations & part of 4 piece set. (ewer, bowl, soap dish, vase)Noneflagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, porcelain container, toilet container, beauty container, ceramic, decorative object, pottery object, brush vase, bowl, ewer, pottery, soap dish lid

This object and the complete set of five items is believed to have been made in or around the Staffordshire area in the United Kingdom. Over 1500 pottery firms have operated in Stoke-on-Trent since the early 1700's - Some lasted only a few years and some for well over 200 years. Some potters built and owned their own works. Many others were tenants in works built by others and a succession of potters occupied the same works. It was also a common practice for a works to be split between two different pottery companies or for a larger manufacturer to let out a smaller section of his works to a potter who would make wares which were not of interest to the pot works owner. Some potters purchased 'blanks' from other manufacturers and put their own decoration on them some items have two back stamps some have no marks at all. This adds to the confusion and frustration of trying to trace details of a particular manufacturer such as the subject item.The subject item at this time cannot be associated with an historical event, person or place, provenance regards manufacturer is unknown, item assessed as a collection asset as it is believed to have been produced before 1950.Soap dish base cream ironstone & part of 4 piece set. (ewer, bowl, soap dish lid, vase)Noneflagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, porcelain container, toilet container, beauty container, ceramic, decorative object, pottery object, brush vase, bowl, ewer, pottery, soap dish lid, soap dish base

Clag was first trademarked in 1898 by Joseph Angus, manufacturer of North Fitzroy, Melbourne. The original paste is thought to have been starch-based. Clag glue was sold in these containers from the early 1900's to the mid 1900's.These items are examples of glass containers used in the early to mid 20th century. Clag glue is an Australian made product still in use today.Two glass Clag bottles . Both are cone shaped and appear to have been sealed with a cork. 2373.1 is a smaller brown glass bottle. 2373.2 is a larger clear glass bottle.2373.1- on base Angus & C0 above ISM Pty Ltd with CLAG on side and numbers 12732 vertically. 2373.2 -on front CONTENTS MADE BY ANGUS & Co PTY Ltd on base - CONTENTS MADE BY ANGUS co PTY ltdjar bottle glue container angus&co clag

T. C. W. CO. is a trademark belonging to the T. C. Wheaton Company--a glassware manufacturer most well-known for their medicine bottles. this small bottle may have contained serum used for animal medication on a local farm.This small bottle is an early example of a glass container used to hold veterinary medicine.A small clear glass bottle with a seal -possibly cork with a metal top.on base - TCW Co 5?0 USAbottle t.c.wheaton container

Beer came in bottles sold at licensed premises either locally or in larger cities visited during shopping expeditions. The shape of bottles were recycled remaining the property of the manufacturer who paid for their return.History of the company - Pick Ax, AdelaideHistorical: Change of bottles - shape, glass, embossing. Collected by bottle collectors. Aesthetic: Display showing embossing & shape especially if in good condition.Clear brown glass bottle used for Beer. Long straight sides before sharp taper to neck which has a slight bulb shape. Glass joined longitudinally on 2 opposite sides. Cork is stuck inside the bottle. Along the bottom of the sides there are 3 rows of heavily embossed print (capital letters), beginning with a circle. Embossed on base: 634. At bottom: circle (can't read). 3 lines: This is the Property of / ....Bottle Co-Operative / Company Limited South Walk.bottle, brown glass, beer, adelaide brewery, pick ax brewery

Uniformissued to and worn by D. Angus.1. Shirt - camouflage jungle pattern green and brown colours, polyester/cotton fabric with long sleeves, shoulder epaulettes, two front pockets with button down flap, green plastic buttons. Left shoulder patch with Rising Sun, Crown and 'THE AUSTRALIAN ARMY". Two rank insignia on sleeve - one stripe - Lance Corporal, Cotton manufacturers label, green with black print information, very faded. 2. Trousers - camouflage jungle pattern green and brown, polyester/cotton fabric. Green colour plastic buttons. Five button fly, two front inside pockets with two button down flaps. two side pockets, button down belt loops. Waist and pocket lining - polyester/cotton fabric. Green cotton manufacturers label on side pocket lining.1. & 2. Green cotton fabric label information - black ink print. 1. "ADI/VICTORIA 1989/^/ 8415.66.130.0028/ SIZE 100 S/ NAME/ SERVICE NO/ MACHINE WASHABLE/ DRIP DRY ONLY/ DO OT IRON/ DO NOT STARCH/ DO NOT BLEACH" Handwritten red ink "ANGUS" . 2. "ADI P/L/ VICTORIA/ 1996/ 6/ 8415.66.130.004 ?/ SIZE 92S/ NAME/ SERVICE NO/ MACHINE WASHABLE/ DRIP DRY ONLY/ DO NOT IRON/ DO NOT STARCH/ DO NOT BLEACH."uniform, army, camouflage work dress\

Two part object. (1) A Wilson 'T3000' metal tennis racquet, with double shaft; metal shaft bridge;and red plastic shaft casing featuring 'W' logo. Model name printed on metal adhesive labels fitted to shaft bridge. Handle wrapped with brown leather. Net anchored to metal wire wrapped around head frame. Red plastic butt cap with partial white label featuring manufacturer's 'W' logo in red. (2) A white and red vinyl racquet head cover with zipper and printed with manufacturer and model names. Has adhesive sticker on each side. Both state: 'NEW/EVEN QUICKER/EVEN STRONGER/T3000'. Materials: Metal, Plastic, Adhesive tape, Nylon, Adhesive label, Leathertennis

Object has two parts - Part (1) A Spalding Pancho Gonzales-endorsed 'Prize Cup' wood tennis racquet. String whipping reinforcements around shoulders and around shaft. Endorser's signature, lion symbol & model name printed across throat on obverse and reverse. Manufacturer's name and logo printed along shaft on both sides of racquet. Grip wrapped with perforated leather. Large Spalding 'S" logo printed onto butt cap. Unreadable writing in marker on butt cap. Part (2) Spalding racquet press, wood with steel bolts and springs in each corner for tightening press. Manufacturer name printed across base on obverse. Top piece on obverse painted black. Materials: Wood, Metal, Lacquer, Glue, Ink, Nylon, Paint, Plastic, Stringtennis

A brown plastic laminate inscribed in white writing. On the reverse of the laminate is the previous attempt by the manufacturer, with the words 'June 1976 by the President of the Royal Blind Society of New South Wales, Sir Alexis Al' with an extra line next to the A. It has been taped over but is clearly visible through the masking tape, however this plate would have been attached to the wall, and the mistake not able to be seen by the public. Manufacturers have made spelling errors or had wood or marble crack as commemoration plates were created, but it is interesting to note that with the change in medium (a plastic), there was the opportunity to re-do the job using the same materialsDigital image of laminate board with white letteringThis plaque was erected to commemorate the opening of extensions to these Royal Blind Society premises on 26th June 1976 by the President of the Royal Blind Society of New South Wales, Sir Alexis Albert, C.M.G., V.R.D., B.Ec. W. G. Cannington O.B.E. President F.A. Crighton J.P. Hon. Secretary A.S. Pickering J.P. Hon. Treasurer C.J. Roworth Manager.royal blind society of new south wales, plaques

Beer came in bottles sold at licensed premises either locally or in larger cities visited during shopping expeditions. The shape of the bottles changed. Bottles were recycled remaining the property of the manufacturer who paid for their return. History of the Richmond Brewery.Historical: Change of bottles - shape, glass, embossing. Collected by bottle collectors. Aesthetic: Display showing embossing & shape especially if in good condition.Clear brown bottle with heavy embossing. The bottom half has straight sides. The top tapers to the opening. Half way up the sides it is heavily embossed with R.B. and underneath these letters R. The face of a tiger features in heavy embossing on the side of the bottle. At the bottom around the circumference and on the base is embossing. There is a broken cork sealing the bottle. Sides: R.B. and underneath this R. with a head of a tiger. Bottom around the circumference: 'The property of Richmond N.S. Brewing Co. Pty. Ltd.' Base: '650'beer, drink, bottle, richmond brewery, richmond

Spirits came in bottles sold at licensed premises either locally or in larger cities visited during shopping expeditions. The shape of bottles varied and were re cycled remaining the property of the manufacturer who paid for their return. History of the Distillery Corporation.Historical: Change of bottles - shape, glass, embossing. collected by bottle collectors Aesthetic: Display showing variations of shape and embossingClear smooth glass bottle almost rectangular but with curved sides and corners. Long straight sides three quarters of the way up tapering to a short straight neck separated by a lip to the opening. Lightly embossed at the front towards the bottom. It has 4 lines of print in capital letters. The base is curved inwards and therefore rounded. Used for storing rum.Side: 'This Bottle / Is the Property / of the / Distillery Corporation (?)' Base: '122' and '0'rum, glass bottle, drink, distillery corporation, spirits

This decorative domestic vase is believed to have been made in England during the early 20th century. There were a number of potteries that made white salt glazes in America and England. The vase has no identifying marks to indicate the date or manufacturer or the pottery.This vase is an example of decorative domestic items from the early 20th century. Vase, white ceramic with leaf and grape pattern.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, shipwreck coast, great ocean road, vase, ceramic vase, salt glazed

"Kettling and Braun", 1931. Contains fliers, pictures, photos, a textile sample and specifications of textile machinery from the German manufacturer, Kettling and Braun. Includes a quotation to Collins Bros Mill, Geelong for the price of supplying a number of items of textile equipment.Book / catalogue containing specifications, photos, a textile sample and quotations for textile machinery by Kettling and Braun, 1931.textile machinery, kettling and braun collins bros mill pty ltd

A tankard mug that was produced in 1946 to honour Legatee Stan Savige service to Melbourne Legacy. See Frank Doolan's account at 01287.10. The mug was produced by EG Greenway Pty Ltd, a pottery manufacturer in Blackburn, associated with Legatee Herb Greenway.Shows the importance of Stan Savige to Legacy that they honoured him by portraying him in a mug.Cream coloured ceramic Toby jug with handle. Relief portrait of Legatee Stan Savige on one side and relief insignia of Legacy Torch and laurel wreath on the opposite side.Under side of mug is etched with Legatee Stan Savige 1946souvenir, founding legatee, stan savige

Albert Martin and Company were manufacturers in London and they held the patent for these clippers. They were advertised for sale in Bendigo in 1898 for 4 shillings a pair and in 1914 they were priced at 4/6 (4 shillings and sixpence). They were sold by various ironmongers. Metal clippers, used for clipping horses. Wooden handle. Quite dirty.A. MARTIN & CO MANUFACTURESmetal, wood

Orbost Aero Club began in 1969 with Basil Dowie as Chair, David Nixon as Secretary/Treasurer. The group went into recess from 1977-1991 closing in 1997. The mid 1960s were boom years in flying training in Australia and the number of Aero Clubs grew rapidly. The Club played a significant role in the establishment of the small airport at Marlo and in the ongoing operation and development of the airport over the years particularly for patient transfer by aerial ambulance. The Orbost Aero Club Club played a significant role in the establishment of the small airport at Marlo and in the ongoing operation and development of the airport over the years.A buff coloured rectangular shaped cardboard box which contained badges for the Orbost Aero Club. The sides are stapled and the lid has a finger opening, written in blue pen on the lid is Orbost Aero Club Big Wings and Large$10.00 Small $2.00.Top in black print - STOKES (Australasia) Ltd METALWARE DIVISION MANUFACTURERS OF BADGES BUTTONS AND MEDALLIONS SINCE 1856 322-332 ALBERT STREET BRUNSWICK VICTORIA AUSTRALIA TEL 382101 orbost-aero-club

This instrument was given to Allan White on 24.8.1935 by his grandfather. Allan White came to Orbost in 1946. He was firstly a share fvarmer on 3 farms then in business - saddler and bike shop with his brother Eric. Then withG.P. Motors as the RACV man. Allan was a "ham radio" operator and involved with Rotary, Rifle and Bowling clubs, also with the Presbyterian Church.A Mezon button accordion with a tan coloured canite carrying case. it has 3 bass valves and 10 treble valves.On front of case : MEZON Superior Manufacturer On accordion : MEZON accordion Made in Germany On end : steel reeds Hand engraved : 24.8.35 Corner pieces : MEZON Trade mark Made in Saxony musical-instrument button-accordion white-allan

Magenta coloured soft covered souvenir booklet.provided by Nicki Shea, Granddaughter of Stan & Jo Bridgman of Eastwood Cycles Editorial introductions by Alf Stumbles, President, Federation of Wholesale Cycle Traders and Manufacturers' Association of Australia, Ted Waterford, Director of Promotions, and Owen R. Browne, Chairman of Victorian Milk Board.

This cash book contains details of payments made and money collected from the period 1940-1946 There are expenses such as road maintenance, stationery, Abattoirs, ice, Botanic Gardens, Booval Gardens, beach improvements, sanitary services, salaries and wages.This cash book provides a detailed description of the day to day expenses of running a city council in the 1940’s. Large green cloth hard cover with tan point and spine. Inside front and back covers is patterned red and blue with thick black diagonal lines. It has binding tape inside front and rear covers. 201 pages edged in pink, green, yellow, and white. The pages have the heading in black print, “City Of Warrnambool.”Label inside front cover,” E. Whitehead & Co, Pty Ltd, Stationers, general Printers and Account Book Manufacturers, Griffin House, 21 Equitable Place, Melbourne. Ref No. 16380. warrnambool city expenses 1940, warrnambool city ledger 1940-1946, warrnambool history

This item is part of the Di Reidie collection. Diane Reidie was a much loved volunteer and President of Brighton Historical Society from 1999 until 2016. Originally from New Zealand, Di and her family lived in Male Street, Brighton for many years. A vibrant and energetic person with a zest for life and a gift for bringing people together, Di was a friend to many in the Bayside community and active in local community organisations. Her tireless work as President of BHS saw her named Bayside Citizen of the Year in 2008. As a seller and collector of vintage clothing, she was passionate about fashion history; one of her many enduring contributions to BHS was her extensive work in preserving, developing and promoting the Society's costume collection. In 2018-19, Di donated more than one hundred items from her personal vintage clothing collection to the Society. The collection, which includes clothing, hats, handbags and shoes from local and international designers, is representative of Di's wide-ranging interests, colourful personality, creativity, humour and love of fashion and travel. Di purchased this 1980s cocktail dress second hand around 2000 to wear as part of a Dame Edna Everage costume to a hen's party. A blue mid calf length polyester dress with prominent gathered and padded shoulders, horizontally ruched bodice, high scoop neckline, full length sleeves and dropped waist. The skirt is of plain blue polyester mock wrap style with ruched blue spiral detail on left leg seam of bodice to skirt. The dress secures at the centre back with a nylon zip and self covered button. The sleeve is lined with mauve / pink polyesterManufacturers label "Teena Varigos" "Size 14, To Fit Bust 90cm, Waist 70cm, Hip 95cm" "Do not iron pleating" "100% Polyester, Warm Iron, Dry Clean Only"teena varigos, costume party, cocktail dress, 1980s, dame edna everage, di reidie

Badge Day is held during Legacy Week, traditionally in September, when collectors sell badges on the streets to raise funds for Legacy. These photos show volunteers and legatees in Legacy House during the day. Many have collection tins. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image the best available.A record of past Badge Days.Colour slide x 4 of Badge Day activity in Legacy House in 1959 in cream Anscochrome mounts.The mounts are imprinted with 'SEP59' by the manufacturer, plus individual slide numbers (3, 4, 5, 6, 8, 9, 10, 11, 12, 13) other numbers may be found later.badge day, fundraising