A Spalding, "Ashley Cooper" Professional Model tennis racquet, featuring whipping around shoulders and shaft, leather perforated handle grip, and embroidered white butt cloth. Manufacturer's name across base of head; model name across throat. Graphic of kangaroo on throat. Along shaft (both sides) is printed 'SYNCHRO-POWER SHAFT'. Wreathed 'S' trademark features on lower shaft and embroidered on butt cloth. Some net strings printed with 'WILSON'. Words 'MESA HI' burned/impressed into shaft. Materials: Wood, Metal, Lacquer, Glue, Ink, Nylon, Paint, Adhesive tape, Leather, Cloth, Threadtennis

Military cap dating from 1966, possibly worn by military personnel in West Germany.This cap is significant as an example of military headwear dating to 1960’s West Germany. Olive drab coloured forage or side cap lined with matching colored fabric. Cap has a flap on each side which may be unfolded. Side flaps are joined by by strip of fabric (all one piece), across the front of the cap which when extended, may form a covering for the mouth area. Flap may be secured with a silver stud button attached to each side of cap. Front of cap displays West German roundel in black, red, and yellow set in olive coloured diamond shaped piece of fabric. Off-white manufacturer’s label on inside, sewn to lining with white thread. Cap is size 54. On inside of hat: (in red) BAMBERGER MUTZEN INDUSTRIE (in black) US12d/22/15565/0028 IX/1966 /5 54 8405-12-138-8897

Book - 32 pages centre stapled titled "1978 Edition - The Australian Tramway and Motor Omnibus Employees Association (Victorian Branch) - Safety, First Aid, Hand tools and protective clothing and equipment". Provides information and guidance on Industrial safety, equipment and fire. Has adverts for The Druids, Holdens, ANSI, Hibernian Society, Thomas Warburton, Wonderpak Chemicals, Fairmark, Commonwealth Engineer, Raff Jeanery, Australian Thread, Regent Motors, Yarra Falls Ltd, Fabspec, Silverway Pharmacy, Consolidated Pneumatic, Sands and McDougall, McAdams of Essendon, the Irish National Foresters Catholic Benefit Society and Tramways Benefit Society.trams, tramways, unions, safety, medical, benefit society, workshops

Clothing, cream coloured double layer child's silk cape. Inner cape has 13 cm one piece circular yolk with 7 cm turned over collar. Casing around neck has 4 cm draw string ribbon threaded through. Inner cape is made from one piece of fabric with inverted V shaped insert on LHS extending 40 cm from edge of yoke. Inner cape is fully lined with cotton fabric. Two extra satin lining panels extend from yolk to hem inside both front openings.(7 cm widening to 28 cm at hem). Outer cape is made from one piece of fabric falling 57 cm from the collar. Outer cape is fully lined with cotton fabric with additional satin lining panels inside front openings from neckline to hem ( 8 cm at neck to 30 cm at hem). Both layers have decorative silk embroidery of floral patterns. Outer cape pattern extends down both sides of front opening and continues above the hem line around the cape. The embroidery on the inner cape extends from the lower edges of the front openings and continues above the hem around the cape. The collar is embroidered with silk thread and lined with satin fabric. Old box 524.costume, children's, cream coloured silk cape.

Damask is a reversible figured fabric of silk, wool, linen, cotton, or synthetic fibres, with a pattern formed by weaving. Damasks are woven with one warp yarn and one weft yarn, usually with the pattern in warp-faced satin weave and the ground in weft-faced or sateen weave. Twill damasks include a twill-woven ground or pattern. Damask weaves appear most commonly in table linens and furnishing fabrics, In the 1900s, the invention of the Jacquard loom made damask much easier to create. Jacquard fabric was woven with the direction of a series of punch cards that could be used to alter the position of the warp threads in the fabric. These punch cards automated the weaving process, allowing manufacturers to mass produce patterns and making the resulting fabric much less expensive than it once had been. Modern Jacquard weaving is accomplished with computer controls. Irish Linen was very popular because of its high quality and this table cloth may have been made in Ulster, Northern IrelandA white damask tablecloth.clothing, brighton, moorabbin, linen, pioneers, haberdashery, market gardeners, dressmakers, craft work, damask, weavers, jacquard loom

Nino Corda was a Geelong based textile designer who worked at various textile mills between 1957 & 2003. He travelled the world in search of the latest fashions and techniques and developed timeless designs that were much loved by Australians. These items are on rotational display at the National Wool Museum’s ‘In the Factory’ exhibition. For many years, Nino also worked as part of the Honorary Staff of the National Wool Museum. His passion for the world of textiles provided energy and knowledge to the visitors and staff of the museum. Although Nino has now retired from his honorary position and has hung up his Australian Tartan vest, these items will continue to serve the community in sharing the stories of Australian Textile design. Textile designers used viewing lenses such as this to see how many threads are within a textile sample. It was important to count correctly, otherwise the enlarged final pattern would be out of alignment. Before compact lenses such as this, specialised glasses were used such as 8039.The viewing lens has a 3 fold design in order to fold up to be compact and easily transportable in a pocket while also working to provide its own stand when unfolded. The lens is black and contains one circular piece of magnifying glass on the top panel.Top panel. Words, scratched. NINOtextile calculations, textile design

Rosemary Myers spoke about Lizzie Daley in May 2012. She described the house as having lots of ornaments, and how she enjoyed going thereto buy ribbons and laces for a pair of baby booties she knitted for her school handwork at Melton P S 430. Margaret Nolan's memories of Lizzie: When we were young kids we would go down to visit our cousins, the Myers who lived on the Highway. My great grand mother Mary Luby lived in Reserve road when she came to Melton, she was married here in 1857. Her sister Ann nee Dowling was married to Henri Miers [Myers] in 1867. Her other sister Eliza married William Daley in 1862. He had a Bootmakers shop in the High street. Their daughter Lizzie later turned it into a haberdashery shop. We would go there to buy sewing threads and ribbons. Margaret nee Nolan Brooks memories recorded on the 20th September 2013 Book was from Lizzie Daley's shop in High Street, Meltonlocal identities

these bottles were found at the old pine plantation near Forest Road Orbost.These various shaped containers are examples of glass containers used in the early 20th century.Seven bottles found at old pine plantation in north of Orbost. 2372.1 is a cylindrical Vegemite jar made of white opal glass. It has a threaded rim and two mould seams. 2372.2 is a brown beef extract jar. 2372.3 is a rounded square white Ponds jar which would have had a metal lid. 2372.4 is a brown Bovril jar and probably had a cork seal. 2372.5 is a clear perfume bottle from Rogers & Gallet Paris. It has concentric circles around the neck and a star pattern on the base.. 2372.6 is a clear glass medical bottle used by Bosisto and 2372.7 is a clear glass cordial bottle from O.T. ltd.2372.1: on base AGM above V905 above 6 2372.2: GLOBEX AGM X3 with Beef Extract on sides 2372.3 - on base PONDS with logo 2372.4 - on side- 2oz BOVRIL LIMITED F204 2372.5 - ROGERS & GALLET logo PARIS 2372.6 - on bottom - AGM ; in indented rectangle on back - BOSISTO & CO Pty Ltd. 2372.7 - at bottom - PROPERTY of O.T. LTD; on base - AGM logo F1151 M F?bottles containers jars vegemite-jar bovril-jar bosito's-bottle pond's-jar

Various parts of weapon trigger system and trigger guards, Items in the collection of Sgt P.L.James, refer Cat No 7446 for his service details.1. Container - brown rusted metal box with sliding lid. Items 2 - 6 all contained within box. 2. Trigger mechanism - hard curled metal part with curved trigger at one end and swinging lever attached by small screw at other end. 3. Lever tripping - silver metal part of the trigger mechanism of the weapon, highly machined and gear attached to one side. 4. Post spring gear - extended black metal pipe (hollow) with gear mechanism attached to end. 5. Container - various parts of threads, screws, springs etc. 6. Bag and small parts - various screws, bolts and other metal parts.trigger mechanism, ww2

This item was before diesel, electric and battery drilling apparatus were used by farmers, and other trades requiring a portable yet reliable method of drilling holes. As this item is a 3/4 inch hole drill it would be suitable for fencing and providing holes for structural studs. As with all outdoor farm equipment, man power was required (be it the farmer or farm hands). Fitness of the operator was at a high standard but protective gloves were not highly thought of as it was before occupational, health and safety regulations became mandatory over all manual handling activities, be they on rural properties or town/city factories. This period was one where the male ego was at its pinnacle i.e. the harder the tasks the more of a man was required. Hard manual work was not only the "way to go" but also a necessity. Evolution of cheap portable electric/battery powered tools opened up a more efficient method available, especially to those with less muscle strength.This item personifies the rugged environment of the rural workplace. The Kiewa Valley with its main emphasis on farming and grazing provided ample opportunity to use this construction implement. The manufacturer being a Scottish tool company is very significant in the era when this hole maker was in high demand. British steel products were of high grade and had a good record of reliability. The reliability of any tool was a solid factor for farmers and tradesmen in this semi-isolated region (Circa early 1900s) of the Kiewa Valley and its regional area. This factor,although not as crucial, post 1960s, when Asian manufacturers entered the market place and produced cheaper tools and transportation and supplies was more frequent and reliable, the need for the more expensive British made tools diminished considerably. After the influx of tradesmen from war torn Europe (post 1945) and the increased availability of tradesmen in the Kiewa Valley and its region the price of tools is not as crucial and the cost of all required tools has become a minimal part of the equation. It is only with the emerging younger trades person, farmer and grazier, who have more, "one eye on production costs" and no "old ties to the motherland" inert mind set that quality tools such as this auger and other hand tools "must be made to last a life time" is no longer part of the modern work environment.This cast iron hand operated drill, has a short barrel-shaped cylinder, known as "the eye" welded across the main rod and is 30mm in circumference. It also has a hole drilled to allow a screw to be fastened onto the hand stock ( not available).The main rod is solid for 400mm and then has been flattened and coiled (Helical screw blade) for another 200mm. At the end of the larger screw blade there is a smaller gauged starter blade with a pointer thread 15mm long. This Auger produces a 1/8th inch hole (metric measurement not used at time of manufacture) See KVHS 0469 for 3/4 inch hole and KVHS 0471 for another 1/8th inch hole.A number 5 stamped on the flat sideauger, hand drill, fencing, tool, rural trades, brace & bit

This item was before diesel, electric and battery drilling apparatus were used by farmers, and other trades requiring a portable yet reliable method of drilling holes. As this item is a 3/4 inch hole drill it would be suitable for fencing and providing holes for structural studs. As with all outdoor farm equipment, man power was required (be it the farmer or farm hands). Fitness of the operator was at a high standard but protective gloves were not highly thought of as it was before occupational, health and safety regulations became mandatory over all manual handling activities, be they on rural properties or town/city factories. This period was one where the male ego was at its pinnacle i.e. the harder the tasks the more of a man was required. Hard manual work was not only the "way to go" but also a necessity. Evolution of cheap portable electric/battery powered tools opened up a more efficient method available, especially to those with less muscle strength.This item personifies the rugged environment of the rural workplace. The Kiewa Valley with its main emphasis on farming and grazing provided ample opportunity to use this construction implement. The manufacturer being a Scottish tool company is very significant in the era when this hole maker was in high demand. British steel products were of high grade and had a good record of reliability. The reliability of any tool was a solid factor for farmers and tradesmen in this semi-isolated region (Circa early 1900s) of the Kiewa Valley and its regional area. This factor,although not as crucial, post 1960s, when Asian manufacturers entered the market place and produced cheaper tools and transportation and supplies was more frequent and reliable, the need for the more expensive British made tools diminished considerably. After the influx of tradesmen from war torn Europe (post 1945) and the increased availability of tradesmen in the Kiewa Valley and its region the price of tools is not as crucial and the cost of all required tools has become a minimal part of the equation. It is only with the emerging younger trades person, farmer and grazier, who have more, "one eye on production costs" and no "old ties to the motherland" inert mind set that quality tools such as this auger and other hand tools "must be made to last a life time" is no longer part of the modern work environment.This cast iron hand operated drill, has a short barrel-shaped cylinder, known as "the eye" welded across the main rod and is 30mm in circumference. It also has a hole drilled to allow a screw to be fastened onto the hand stock ( not available).The main rod is solid for 400mm and then has been flattened and coiled (Helical screw blade) for another 200mm. At the end of the larger screw blade there is a smaller gauged starter blade with a pointer thread 15mm long. This Auger produces a 1/8th inch hole (metric measurement not used at time of manufacture) See KVHS 0469 for 3/4 inch hole and KVHS 0470 for another 1/8th inch hole.auger, hand drill, fencing, tool, rural trades, brace & bit

Clothing. Women's white cotton full length half petticoat.Centre back opening (25 cm) fastened with cotton tape ties attached to edges of waistband(4cm). Skirt of petticoat shaped by darts around waistline and pleats at centre back. Hemline edged with 1 cm scalloped lace. Flounced layer at bottom of petticoat (38 cm) has two horizontal 1 cm ribbon strips, a zig zag lace insert (6 cm wide) and scalloped broderie lace edging (8 cm). Ribbon insert lace along the top edge of the flounced layer is threaded with pink 1 cm ribbon. Ribbon tied with a bow at front on LHS.costume, female, women's white cotton half petticoat

Clothing. Long pointed sleeves, fastened with one press-stud at the wrist. Full circular skirt, lined with cream, synthetic lace type fabric. Fabric of the gown is a small floral type design,in a corded style, on a fine net backing. Sleeves are not lined. Back upper bodice has a lining in a double thread net. The sweetheart neckline is edged with a fine tulle frill. Bustline panels gathered top and bottom, and joins a peaked midriff panel, 15.5 cm deep at the centre bustline. Skirt is highly gathered to this panel, at the waistline, is a full circle and extends into a small train at the back. A small 23 cm zip on the left side seam.A KEAM Creation, Regd. Melbourne.costume, female ceremonial, ivory corded lace wedding gown

Clothing. Single knife pleat on either side of front waistband, 20 cms deep fly front, with plastic zip, and metal fastener on waistband. Also evidence of an internal front tab fastening with cotton stitched button hole, but button is missing. Two side pockets sewn into side seams, and two bound pockets on either side of back -all polyester or nylon fabric. Seven 1 cm belt loops around waistband. A 3 cm wide strip of red flannel is stitched from waistband to hem on the outer side of each leg. This is over laid with a 1.2cm wide gold metal thread, decorative weave braid.AGCF 1982 (Australian Government Clothing Factory).costume, male ceremonial, marong municipal band uniform trousers

Mid-length shift dress in light grey-blue. Dress consists of two breast pockets, each with rounded flap closure held in place by two press studs. Dress is fastened down centre with three silver buttons held in place with a metal ring (only two buttons remain). From waist line down, dress is fastened by a hidden zipper and hook and eye. Waist line is pleated and carries two loops on the back, through which a fabric belt (0030.2) is threaded. Two fabric loops on each shoulder may have been used to hold epaulettes or similar. Dress sleeves are rolled up by 40 mm. Collar is notched. Interior label on left side at waist height reads "IYD CLO CO/VIC./8410-66-000-000/SIZE 18/ARMY NO........../NAME............"

This rug was woven in the mid-1990s at the Tascot Templeton Carpet (TTC) mills in Devonport, Tasmania. It was an in-house design. The rug was woven as a one-off design exercise and was given a Golden Thread Award by the Australian Wool Corporation. The design never went into standard stock production and was never released for public sale. This rug has been woven with 100% wool on a 1 metre wide loom. The loom was purchased by TTC from United Carpet Mills of Preston and the rug was woven to demonstrate the capabilities of these looms. This rug is an example of Wilton weaving. Wilton differs from Axminster in that it is usually Loop Pile and 100% wool whereas Axminster is Plush (cut) pile and normally 80/20 wool nylon blend. TTC manufactured primarily high-quality narrow and broad loom, Axminster and Wilton carpets for the domestic and commercial market. They operated from the early 1960s until their closure in 2011. This rug was also on display in the Tascot Templeton head offices before being donated to the National Wool Museum in 2021 by Roger Warn. 3 x 3-meter carpet rug woven in 1-meter wide sections. The pattern repeats 3 times both in the width and the length. Starting from the bottom left corner, a square can be seen within a larger circular shape. These circular shapes connect end on end across the width and length of the rug. 5 Circles make up the length of the rug while 6 circles make up the width. Numerous small shapes encompass the entirety of the rug. These small shapes work together to form many interconnected repeating forms that draw your eye in a new direction every time you look at the rug. The predominant colour of the rug is a purple background with blue, cream and orange colours making up the foreground colours.carpet rugs, woollen rugs, tascot templeton carpets, axminster carpet loom

1. & 2. DPCU (Disruptive Pattern Camouflage Uniform) Sewing kit plus an extra cover. Colours - light to dark green through to mid to dark brown. Cotton/Polyester fabric with metal press stud flap closer and black colour woven tape. Rectangular shape with two pockets - rolls up to store. 1. Contents of sewing kit, four reels of cotton/polyester thread, colours white, khaki, dark and lighter green, nine plastic buttons, four dark green, two light brown, three white. Two safety pins and one metal thimble. Eight silver metal sewing needles. 1. & 2. Manufacturers stamp inside top flap.Manufacturers information - black ink stamp. 1. "CLAYTONS/ NSW ^ 2007/ NSN 8315 66 134 9185/ Name/ Service No." 2. "SIRWAY 2011/ NSN 8315-66-184-9185/ NAME/ PM KEYS NO".accessory, army, sewing kit

Part of the Kevin John Herdman No. 397661 Collection. See Catalogue No. 5942P for details of his service record..1) Khaki battle dress jacket with button front and attached belt and buckle. Royal Australian Corps of Transport badges on each shoulder. Major's Crown on each epaulette. Red and blue lanyard threaded through left epaulette and secured in left breast pocket. Two button-down breast pockets. Buttons are khaki bakelite. .2) Pair khaki trousers with pleated front and zippered fly. Two side pockets and button-down hip pocket. Fob pocket and six belt loops. Buttons are khaki bakelite. .3) Khaki peaked cap with brown leather band. RACT badge on front of cap. Brown sweat band and clear plastic lining..1) and .2) On manufacturer's label: ' KEITH COURTENAY PTY LTD, VICTORIA, 1972-1973, 9upwards arrow), NAME: CAPT HERDMAN. K.' .3) On label inside cap: 'HERBERT JOHNSON, 13 OLD BURLINGTON ST, LONDON, W1, FOR CHORLEYS, CANBERRA'.royal australian corps of transport, kevin john herdman, uniform

Snow shoes were used to move between places on the snow fields at Falls Creek and the Bogong High Plains especially during the construction of the Kiewa Hydro Scheme.Historical: Snow shoes were used on the Bogong High Plains during winter. The body is made of light wood 'bamboo' with a back and front wooden cross bar. Between the front cross bar and toe, blue nylon is tied to form diamonds 'lacing', similarly the back. Between the bars, in the middle is cream coloured rope tied to form a strong basket. A shoe harness made of olive green vinyl to which is clipped brown strong woven material tape with a circular steel loop through which the tape is threaded. There are 3 steel fasteners on 1 side and 2 on the other with a black plastic fastener. At the front between the cream and blue woven baskets there is a gap called the toe hole. The rope is attached either side of the toe hole to the front wooden bar.snow. falls creek. bogong high plains. transport. victorian alps.

RAAF uniform worn by Squadron Leader Ian A. 'Joe' Lyons, Operations Officer for No. 77 Squadron. Part of the Ian A. 'Joe' Lyons MBE Collection. See Catalogue No. 5374P for details of his service record..1) RAAF uniform jacket, dark blue in colour. Black fabric inner lining. Gold coloured buttons. Coat has two button down breast pockets and two button-down side pockets. Dark blue fabric belt with metal buckle is threaded through two belt loops. Three rows of service ribbons including an MBE ribbon and pilot officer's wings on left hand breast. Rank insignia on the bottom of each sleeve. .2) Dark blue fabric trousers with two side pockets, belt loops and button fly. Buttons for braces on the inner waist band. .3) Dark blue fabric tie. Manufacturer's label on keeper loop..1) On label sewn into neck: 'M TX'. .2) On label sewn onto inside waist band: ' M TX'. .3) On keeper: Trent Nathan'.uniform, raaf, ian a. 'joe' lyons

White fine cotton short sleeved blouse. The front is made of two pieces with a front opening. Each side has two darts from the waist and are slightly gathered at centre front. The front has a V shaped neckline with a border from the shoulder. The border is made up of three rows of cotton featuring drawn work patterns and embroidered flowers. The back is made of two pieces with a centre seam. The front and back pieces are attached to a casing that is attached to a peplum. The neckline is edged with lace at front and back. The front opening is fastened with three buttons and buttonholes plus three cotton tapes threaded through casings around the neckline and around the waist above the peplum.costume, female daywear, cotton blouse

Clothing. White linen camisole with peplum 8.5 cm deep. Round lace yoke at the front, with a panel for a ribbon insertion. Some evidence exists on the right front, that once there was a pink ribbon - possibly silk, but now there are only a few threads left. The insertion panel continues around the back neck edge. Two panels of three .5 cm tucks run from the neckline to the waist of the centre back. Front opening, with two 1 cm pearl buttons still evident, and a cotton tape and casing at the waistline. ON each side of front opening, a group of five pintucks, 7 cm long run from the waistline toward the bustline.All items belonged to Margaret Ann McLean.costume, female, white linen camisole.

Clothing. Narrow shoulders straps-.8 cm, hold the curved slightly peaked bodice-shaped at both front and back. One dart at each side seam of front. Centre front is lavishly embroidered in a chinese style, with some cut work, some shadow work and silk thread floral embroidery. Neckline is bound with a fine 'rouleau' type binding. Front has a V-shaped panel inserted from the right hemline, and back has an identical panel at left hemline. French side seams, machine stitched. Hemline bound as for neckline. Inside left hand side-on dart below arm hole, a small piece of white tape is stitched, bearing the initials;M.C.costume, female, pink embroidered silk petticoat

Nickel plated skim milk and cream separator. Splits into six pieces; some pieces are believed to be missing. Two pieces are cylindrical and have long spouts that curve downwards at the ends. Conical shaped piece which goes in centre and has hole through the middle (This piece has removable brass screw). Long straight rod with wooden handle and small, threaded section at other end. Rounded, circular rubber band, probably used as seal. Large round pot with thin flanged rim, seated on raised base edges. Tap with fitting on one side. Round piece with three evenly spaced legs. both sides slightly domed - fits into upper separator piece.On the brass nut of the conical shaped piece is engraved "unscrew" with an arrow adjacent. "10516-C" with another arrow and oval shaped trademark with lines inside. Embossed on the external casing of the conical piece is "2".food technology, dairying, milk, cream, dairy, separator, nickel, steel.

The Wodonga Historical Society Haeusler Collection provides invaluable insight into life in late nineteenth and early twentieth century north east Victoria. The collection comprises manuscripts, personal artefacts used by the Haeusler family on their farm in Wodonga, and a set of glass negatives which offer a unique visual snapshot of the domestic and social lives of the Haeusler family and local Wodonga community. The Haeusler family migrated from Prussia (Germany) to South Australia in the 1840s and 1850s, before purchasing 100 acres of Crown Land made available under the Victorian Lands Act 1862 (also known as ‘Duffy’s Land Act’) in 1866 in what is now Wodonga West. The Haeusler family were one of several German families to migrate from South Australia to Wodonga in the 1860s.| This sewing machine belonged to Isla Ilma Margaret Ernestine neeTasker, mother of Alfred Haeusler. Singer was first established as I. M. Singer & Co. in 1851 by Isaac Merritt Singer with New York lawyer Edward C. Clark. Best known for its sewing machines, it was renamed Singer Manufacturing Company in 1865, then the Singer Company in 1963. The Singer company began to market its machines internationally in 1855 and won first prize at the Paris world's fair that year. They had offices established in both Sydney and Melbourne by the mid-1960s. The company demonstrated the first workable electric sewing machine in 1910. Singer was also a marketing innovator and a pioneer in promoting the use of instalment payment plans, making their machines more affordable for many people. This item is from the Hauseler Collection which documents social life of early settlers in the Wodonga community.Singer "Coffin top" treadle sewing machine with extension table. The machine is mainly black and silver metal but is extensively decorated with coloured decals. The decorations on this machine features a pheasant design which also helps to date the machine as it was only used from 1890 to 1915. The sewing machine is set into a wooden table with and extension leaf and 6 drawers, 3 on either side. The frame and treadle mechanism are iron with a thin leather belt to drive the mechanism. The "coffin" shaped top sits over the machine to protect it when not in use and is easily removed. The extension leaf provides a larger working surface and folds down when not in use. The Singer logo attached to the front of the machine features a needle, shuttle and thread.On metal base plate: "PATENTED /DEC 5 -1882/ MARCH 20 - 1883/ AUG - 21 1888. Model no: L6485622 Along top of machine: "The Singer Manufacturing Co." Front right: Singer Company Logohaeusler family, wodonga pioneers, sewing machines, singer sewing macnine

Research suggests that this dress dates from the early 1920's when elastic was first used in clothing.Deep cream cotton muslin ladies tea dress. High waisted, square neckline, elbow length sleeves edged in cotton lace. Skirt has four panels of fabric - two side panels extending around front and back, and centre panels at front and back. French seams - some stitched in pink thread - machine stitched. Centre panels have two rectangular inserts of cotton lace. Each side panel has one rectangular insert of cotton lace. Lace inserts are edged on sides with six ball passementerie buttons. Neckline and sleeves edged with cream cotton lace. Soft gathering from neckline of centre front and back. Elastic casing around waist.costume, female, ladies tea dress

A bodice belonging to the family of George Ward Cole in the late 1800s. George Ward Cole was an early member of the Victorian Parliament and the family featured prominently in Melbourne Society in their time. They established a substantial home known as “St Ninians” at 10 Miller Street in 1841. The family reportedly entertained Melbourne’s first Royal visitor The Duke Of Edinburgh, Queen Victoria’s second son, at St Ninians in 1867. In later years St Ninians was subsequently subdivided and later demolished. A hand sewn cream silk satin evening bodice from c.1865. This bodice features a very low, wide scooped neckline with a set in sleeve and four small pleats across the head of the shoulder. The elbow length, straight fitted sleeves are trimmed with a pleated ruffle that extends around the arm finishing at the elbow crease at the inside arm and tapering to mid forearm length at the back. The fitted bodice, lined with waxed linen, fastens down the centre front with eight covered buttons of the bodice fabric. The front two panels wrap around the sides of the bodice to meet another series of panels creating a princess line with a delineated central spine. The waist position is just below the natural waist at the sides, tapering to an elongated front covering the belly. From the sides towards the back it curves up to the natural waistline and then down again to a central point. The bodice is decorated with strips of the same fabric, which has been tucked, pleated and padded to create ruching. The ruching edge has a multi coloured thread, suggestive of rosettes, on both sides. In the front of the bodice, a strip runs down the centre front, concealing the buttonholes, and finishing at the elongated point. It then goes up the bodice over the bust line where it meets the neckline. It follows the neckline around the nape of the neck and back down the front over the bust line to the centre front. More strips run around the base of the fitted sleeve near the elbow above the ruffle. The rosette like coloured thread finishes the base of the ruffle. st ninians, george ward cole, bodice, late 1800s, brighton, margaret morrison ward cole

The Shipwreck Board is a feature of Flagstaff Hill Maritime Museum and Village/ its subject is explained briefly in the Museum's handbook, The Flagstaff Hill Navigator, published in 2008: - "Known as the ‘Eye of the Needle’ the treacherous entrance to Bass Strait is littered with the wreckage of large international vessels and smaller sail and steam craft used in coastal trade. The vessels bringing emigrants and cargo to Australia found the western entrance to Bass Strait the most dangerous part of their voyage. They had to thread their way between the southern point of Victoria (Cape Otway) and the northern point of King Island, a stretch of water less than 90 km wide. Many smaller coastal vessels were lost at Portland, Port Fairy, Warrnambool and Apollo Bay which are not safe harbours in certain weather conditions. "The Shipwreck Board shows shipwrecks, strandings and collisions which occurred in this area up to the year 1940. Wrecks are identified by a yellow light and collisions/strandings by a green light. These lights also identify the decade the wreck occurred by lighting up when the relevant decade button is pushed. Interesting happenings of the decades are listed next to the buttons." The Shipwreck Board's demonstration of The Eye of the Needle is an interactive visual display that helps teach the perils and dangers faced by early settlers in Victoria. It tells of the vast number of lives lost. It lists the names of many infamous shipwrecks and significant events.The large stained and lacquered timber board is mounted in a timber, frame. It is painted with a small sketch of Australia, and an enlarged outline of the southern coast of Victoria, King Island and the North West coast of Tasmania. The interactive display highlights the shipwrecks, standings and collisions suffered by many vessels as they navigated the 'Eye of the Needle', a narrow stretch of Bass Strait. The locations of the Lighthouses are pinpointed. Lists of groups of ships are below the coastlines. A painted scroll shows eight major shipwrecks with the number of lives lost for each one. A table shows historical facts associated with the decades from pre-1830 to 1940. A system of coloured lights compares the decades with the vessels that suffered damage. The board was created by artist and signwriter, Alex O'Flynn Computer Signs.flagstaff hill, maritime museum, maritime village, shipwreck coast, eye of the needle, shipwreck locations, bass strait, basses strait, king island, north west tasmania, south coast of victoria, cape otway, victorian lighthouse, king island lighthouse, strandings, coastal tracers, emigrant ships, sea trade, 1930s-1940s, shipwreck board, the eye of the needle, collosions, alex o'flynn, alex o’flynn computer signs

This coat was issued to Airman Bernard Farley in 1976 as an initial issue of uniform. Bernard was enlisted in the Royal Australian Air Force in Warrnambool on 26th January 1976. This item is a Royal Australian Air Force uniform that was issued for the airman Bernard Farley. It has historic and social significance as an item of local military history. It is also in near perfect condition.RAAF Blue Gaberdine Greatcoat/Overcoat. Double Breasted. Belted at waist. Partly lined inside body; sleeves fully lined. Two vertical pocket openings at belt height give access to large inner pocket and to separate inner clothing. Double line of 5 Gold coloured plastic(?) buttons with Crown and Wingson on left and right front of coat. Single black plastic button on inside of coat immediately behind top left gold button. Epaulettes on shoulders are attached at outer end and have a small gold coloured button and button hole attachment at inner end; 'RAAF' sewn in lighter blue thread on outer end of each epaulette. Sleeves have 3 small gold buttons on cuffs.Attachment inside collar reads; A.G.C.F. (Australian Government Clothing Factory) Vic 1976. Broad Arrow Symbol. 8405.66.013.6603. Size 3L. No. NAME. Attachment inside lower left reads; handwritten, 17481, E746813, 3L,30560. 27.Blue Stamp - S broad arrow Nraaf, great coat, royal australian air force, r.a.a.f., air force, uniform, coat, bernard farley, farley, airman, warrnambool, warrnambool rsl