Photo shows the T&G building in Geelong on the corner of Ryrie and Moorabool streets with the Father and Son clock striking the hour. See reference for the details of the building and clock. On the rear is a letter dated 16-7-1936 written to Charles and his brother Michael by their mother noting the clock. In the bottom right hand corner is Birney 15. Note the tramway information sign on the pole on the left hand side of the card. Published by Valentine Publishing Co of Queen St Melbourne No 2114Yields information about the Geelong T&G building and the general street scene.Postcard - Black and white of the T&G Building in Geelong. Has be used for a letter.tramways, trams, geelong, t&g building, clocks, valentine

This book was part of a large group of books referred to as the Pattison Collection, which belonged to the Warrnambool Public Library, part of the Warrnambool Mechanics’ Institute. About RALPH ERIC PATTISON and the ‘PATTISON COLLECTION’ The ‘Pattison Collection’ is a collection of books and records that was originally owned by the Warrnambool Mechanics’ Institute, founded in Warrnambool in 1853. By 1886 the Warrnambool Mechanics’ Institute (WMI) had grown to have a Library, Museum and Fine Arts Gallery, with a collection of “… choice productions of art and valuable specimens in almost every branch and many wonderful national curiosities, are now to be seen there, including historic relics of the town and district.” It later included a School of Design. Although it was very well patronised, the WMI was led to ask the City Council to take it over in 1911 due to a lack of financial support. In 1935 Ralph Pattison was appointed as City Librarian to establish and organise the Warrnambool Public Library as it was then called. Ralph Eric Pattison was born in Rockhampton, Queensland, in 1891. He married Maude Swan from Warrnambool in 1920 and they set up a home in Warrnambool. In 1935 when Pattison accepted the position as City Librarian for the Warrnambool City Council his huge challenge was to make a functional library within two rooms of the Mechanics’ Institute. He tirelessly cleaned, cleared and sorted a disarrayed collection of old books, jars of preserved specimens and other items reserved for exhibition in the city’s museum. He developed and updated the library with a wide variety of books for all tastes, including reference books for students; a difficult task to fulfil during the years following the Depression. He converted all of the lower areas of the building into a library, reference room and reading room for members and the public. The books were sorted and stored using a cataloguing and card index system that he had developed himself. He also prepared the upper floor of the building and established the Art Gallery and later the Museum, a place to exhibit the many old relics that had been stored for years for this purpose. One of the treasures he found was a beautiful ancient clock, which he repaired, restored and enjoyed using in his office during the years of his service there. Ralph Pattison was described as “a meticulous gentleman whose punctuality, floorless courtesy and distinctive neat dress were hallmarks of his character, and ‘his’ clock controlled his daily routine and his opening and closing of the library’s large heavy doors to the minute.” Pattison took leave from 1942 to 1945 to serve in the Royal Australian Navy, Volunteer Reserve as Lieutenant. A few years later he converted one of the Museum’s rooms into a Children’s Library, stocking it with suitable books for the younger generation. This was an instant success. In the 1950’s he had the honour of being appointed to the Victorian Library Board and received more inspiration from the monthly conferences in Melbourne. He was sadly retired in 1959 after over 23 years of service, due to the fact that he had gone over the working age of council officers. However, he continued to take a very keen interest in the continual development of the Library until his death in 1969. THE NEW WARRNAMBOOL LIBRARY When the WMI building was pulled down in 1963 a new civic building was erected on the site and the new Warrnambool Library, on behalf of the City Council, took over all the holdings of the WMI. At this time some of the items were separated and identified as the ‘Pattison Collection’, named after Pattison. Eventually, the components of the WMI were distributed from the Warrnambool Library to various places, including the Art Gallery, Historical Society and Flagstaff Hill. Later some were even distributed to other regional branches of Corangamite Regional Library and passed to and fro. It is difficult now to trace just where all of the items have ended up. The books at Flagstaff Hill Maritime Village generally display stamps and markings from Pattison as well as a variety of other institutions including the Mechanics’ Institute itself. The Pattison Collection, along with other items at Flagstaff Hill Maritime Village, was originally part of the Warrnambool Mechanics' Institute’s collection. The Warrnambool Mechanics’ Institute Collection is primarily significant in its totality, rather than for the individual objects it contains. Its contents are highly representative of the development of Mechanics' Institute libraries across Australia, particularly Victoria. A diversity of publications and themes has been amassed, and these provide clues to our understanding of the nature of and changes in the reading habits of Victorians from the 1850s to the middle of the 20th century. The collection also highlights the Warrnambool community’s commitment to the Mechanics’ Institute, reading, literacy and learning in the regions, and proves that access to knowledge was not impeded by distance. These items help to provide a more complete picture of our community’s ideals and aspirations. The Warrnambool Mechanics Institute book collection has historical and social significance for its strong association with the Mechanics Institute movement and the important role it played in the intellectual, cultural and social development of people throughout the latter part of the nineteenth century and the early twentieth century. The collection of books is a rare example of an early lending library and its significance is enhanced by the survival of an original collection of many volumes. The Warrnambool Mechanics' Institute’s publication collection is of both local and state significance. Masques and Entertainments Author: Ben Jonson Publisher: George Routledge & Sons Date: 1890 The label on the spine cover with typed text PAT 822 JON Paste down front end paper has a sticker from Warrnambool Mechanics Institute and Free Library. Front loose end paper has a sticker from Corangamite Regional Library Service. Front loose end paper has a stamp from Warrnambool Mechanics Institute. flagstaff hil, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, book, pattison collection, warrnambool library, warrnambool mechanics’ institute, ralph eric pattison, corangamite regional library service, warrnambool city librarian, mechanics’ institute library, victorian library board, warrnambool books and records, warrnambool children’s library, masques and entertainments, ben jonson

The Dormans are pictured in an article entitled "Today's missionaries: they face culture shock at home and dangers abroad". Other people mentioned in the article are Margaret Reeson, Beth Davies, the Rev. Ross Mackay.The photo shows Geoff and Jenny Dorman holding their son Matthew, all facing the camera.C&N identification.dorman family, missionaries

Series of photographs loaned for copying by Robert Collier through Keith Rooney. Photographs have been scanned by Ted Arrowsmith at 300dpi as a 'tiff' and burnt onto a CD Rom. copies of photographs were produced from the CD Rom for inclusion in the album.Black and white photograph of Robert Collier with his son Fred picking fruit on the orchard.collier fred, collier robert, springvale road tunstall, orchards, tunstall

The subject item is a saw blade sharpening clamp that attaches to a bench allowing the operator to sharpen the teeth on a saw with a file while keeping the saw blade in an upright position. Henry Disston (1819–1878) began his career as an American saw maker in Philadelphia. He emigrated from England in 1833 and started making saws and squares in 1840. In 1850, he founded the company that would become the largest saw maker in the world the ”Keystone Saw Works” on the Delaware River. Some five years later, Disston built a furnace possibly the first melting plant for steel in America and began producing the first crucible saw steel ever made in the United States. While his competitors were buying good steel from Britain, he was making his own, to his specification, for his own needs. Disston subsequently constructed a special rolling mill exclusively for saw blades. Over the following decade, the Disston company continued to grow, even while dedicating itself to the Union Army's war effort. In 1865, when his son Hamilton Disston rejoined the business after serving in the Civil War, Disston changed the company's name to Henry Disston & Son. Henry Disston and his sons set the standards for American saw makers, both in terms of producing high-quality saws and developing innovative manufacturing techniques. Disston also started making files in 1865. In September 1872, Henry Disston and two other men dug a part of the foundation for what was to become the largest saw manufacturing facility in the world: Disston Saw Works. This was in the Tacony section of Philadelphia. Having previously moved his expanding business from near Second and Market Streets to Front and Laurel Streets, Disston sought to establish his business away from this cramped area. It took over 25 years to move the entire facility to Tacony. This Philadelphia neighborhood seems to have been the only company town in the United States established within an existing city. At its peak of operations, Disston Saw Works employed 8,000 people and the factory covered 300 acres. The company, known as Henry Disston and Sons, Inc by the early 20th century, cast the first crucible steel in the nation from an electric furnace in 1906. The firm's Armour plate building near Princeton Avenue and Milnor Street contributed tremendously to the World War II effort. But the company's innovation and industriousness would not last forever. In 1955, with mounting cash-flow problems and waning interest on the family's part to run the firm, Henry Disston and Sons were sold to the H.K. Porter Company of Pittsburgh. Porter's Disston Division was sold in 1978 and became the Henry Disston Division of Sandvik Saw of Sweden. This division was then sold in 1984 to R.A.F. Industries of Philadelphia and became known as Disston Precision Incorporated, a maker of specialized flat steel products. In 2013, R.A.F. Industries sold Disston Precision Inc. in a private sale. Although the company has ceased making Disston handsaws, the Disston brand name still exists in this firm. A significant American company that pioneered the making of high-quality steel and saws along with other tools and accessories. The subject item is significant as it was made at a time when the company was in its hay day. Adjustable Ball & Socket Saw Sharpening vice, cast iron, with clamp to attach to a workbench. Made by Henry Disston & Co. No 1 painted greyflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, saw clamp, henry disston & sons, saw sharpening, tool accessories, wood saws

As on back of photograph. "A Phillip Islander goes to War. Corporal Frederick Edward Woodley, No. VX24588 of 2nd/10th Field Company, Royal Australian Engineers, with his wife Ruby, eldest son Arthur and John, pictured beside the shed on Cowes Jetty prior to his departure for active service overseas. January 1941. Fred subsequently voyaged from Sydney to Singapore (via Western Australia) on the troop ship Queen Mary. He was taken prisoner-of-war by the Japanese at the fall of Singapore and imprisoned at the Changi P O W Camp. Later, after being on the missing list for some two years, it was learned that he was imprisoned at the most infamous Sandakan P O W camp in North Borneo from where he did not return. Fred was 37 years of age when this photo was taken. With compliments, Arthur E Woodley, 34 Park Road, Crib Point. 6/8/1995" Arthur claims this is the only photo of the family together.HistoricalBlack & White photograph of Corporal Frederick Edward Woodley (Royal Australian Engineer) with his wife Ruby, eldest son Arthur and John, standing beside the Cowes Jetty shed, Phillip Island.Detailed inscription on back - see Historical Information below.corporal frederick edward woodley, royal australian engineers, wwii, arthur e woodley, military

Yields information about the identification methods used by the ESCo to identify their crews to public and has a strong association with the individuals who wore them over time.Pressed metal uniform badge for ESCo Drivers. Round pressed steel badge with the words "ESCo OF V. LTD." pressed into the badge around the top portion of the badge, the word "DRIVER" and number "15" pressed into the lower half of the badge -with small horizontal lines within the individual letters. Appears to have had a nickel silver finish originally. On rear badge two metal lugs have been soldered onto the badge and a leather strap with a button hole cut into to enable it to be worn on a uniform. Has words "STOKES & SONS" stamped in reverse on the lower rear of the badge. Badges of this type shown on ESCo uniforms of 1905 and through to the 20's. See Reg. item 2900 for Conductors Badge and 5280 for Driver's badge No. 49. tramways, trams, esco, drivers, badges, uniforms

Photograph probably for promotional purposes, of a "David Sowden & Sons" loom. Photograph was with other photographs in an envelope printed "David Sowden & Sons" among items from Yarra Falls MillPhotograph. black and white, of a "David Sowden & Sons" loom.textile machinery weaving, yarra falls mill david sowden & sons, weaving looms, weaving machinery, textile machinery, weaving

Photograph probably for promotional purposes, of a "David Sowden & Sons" loom. Photograph was with other photographs in an envelope printed "David Sowden & Sons" among items from Yarra Falls MillPhotograph. black and white, of a "David Sowden & Sons" loom.textile machinery weaving textile mills textile mills, yarra falls mill david sowden & sons, weaving looms, weaving machinery, textile machinery, weaving, textile mills

Photograph probably for promotional purposes, of a "David Sowden & Sons" loom. Photograph was with other photographs in an envelope printed "David Sowden & Sons" among items from Yarra Falls Mill.Photograph. black and white, of a "David Sowden & Sons" loom.textile machinery weaving, yarra falls mill david sowden & sons, weaving looms, weaving machinery, textile machinery, weaving

Photograph probably for promotional purposes, of a "David Sowden and Sons" loom. Photograph was with other photographs in an envelope printed "David Sowden & Sons" among items from Yarra Falls Mill.Photograph, black and white, of a "David Sowden & Sons" loom.textile machinery weaving, yarra falls mill david sowden & sons, weaving looms, weaving machinery, textile machinery, weaving

Photograph probably for promotional purposes, of a "David Sowden and Sons" loom. Photograph was with other photographs in an envelope printed "David Sowden & Sons" among items from Yarra Falls Mill.Photograph, black and white, of a "David Sowden & Sons," loom.textile machinery weaving, yarra falls mill david sowden & sons, weaving looms, weaving machinery, textile machinery, weaving

Officer's campaign boots worn by Brigadier Geoffrey Austin Street MC who served in WWI at Gallipoli and on the Western Front. Following the war he was placed on the Reserve of Officers. He returned to military service in 1931 as Squadron Commander in the 4th Light Horse. He was promoted to the command of the regiment after l8 months' service, and finally to the command of the Third Cavalry Brigade which included the 8th Light Horse Regiment. Brigadier Street had entered Federal Parliament in 1934 and in November 1938 was seconded from military duties to serve as Minister for Defence in the Lyons Government . He was serving in this capacity in the Menzies government when he was killed in an air crash near Canberra on 13 August 1940.Representative example of officer's leather campaign boots from the 'between the wars' period. Well preserved example of the boot makers art, complete and in fair condition. Owned by well known Australian soldier and politician tragically killed at commencement of Second World War.Brown leather officer's campaign boots with hook and eye fasteners and fabric laces.Stamped on inner side of legging section "W Abbott & Son London & Paris"boots, street geoffrey austin brigadier, minister for defence, 3rd cavalry brigade

Photograph probably for promotional purposes, of a "David Sowden and Sons" loom No 158. Photograph was with other photographs in an envelope printed "David Sowden & Sons", among items from Yarra Falls Mill.Photograph, sepia, of a "David Sowden & Sons" loom, No 158.textile machinery weaving, yarra falls mill david sowden & sons, weaving looms, weaving machinery, textile machinery, weaving

Digitial image of a Valentine & Sons postcard titled "Lower Sturt St Ballarat" with tram No. 28 on the south side of Lydiard St, in Sturt St. Photo has Robbie Burns statue, Mechanics Institute, Unicorn Hotel and Bucks Head Hotel at the bottom end Sturt St. Advertisements for Suttons very prominent. Wal's album notes date the photograph about 1934. Published by Valentines Publishing Co. Queen St Melbourne. For rear of postcard - see image i2 snd item 8984 for the actual postcard. Yields information the appearance of Sturt St at Lydiard St about 1934.Digital image from the Wal Jack Ballarat Album of a Valentines Postcard No. 1568, trams, tramways, sturt st, lydiard st, tram 28

Plane, Moulding, Roman Ogee. Maker A Mathieson and Son with 5/8 inch iron and wooden body and wedge. Stamped CC,No185,GN inside a W.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane, moulding, a mathieson and son

Photograph probably for promotional purposes, of part of a "David Sowden and Sons" loom No 118. Photograph was with other photographs in an envelope printed "David Sowden & Sons", among items from Yarra Falls Mill.Photograph, sepia, of a "David Sowden & Sons" loom, No 118.118textile machinery weaving, yarra falls mill david sowden & sons, weaving looms, weaving machinery, textile machinery, weaving

This top hat, with the initials J.H.H., belonged to John Hunter Henderson, a doctor who practised in Warrnambool from 1904 to 1939. For many years he was a member of the Warrnambool Hospital Board of Management. On his retirement in 1939 he went to live in Melbourne where he died aged 81. The John Hunter Henderson fund was established at the Warrnambool Hospital to develop the training facilities for medical and nursing staff. The bowler hat belonged to his driver (name unknown) and it is presumed that he drove a horse and buggy in the early years of the 20th century. These items are of considerable significance as they are associated with Dr Henderson, a long-serving doctor in Warrnambool and they show the status and comparative affluence of doctors in the first half of the 20th century. .1 This is a black top hat with the crown covered in beaver fur or felt of some kind. The upturned brim is slightly worn on one edge. The crown has a black corded band with a bow on one side. There is a stud with an air hole on the crown. Inside there is a brown leather lining with information on the maker on the inside base and a crown image. .2 This is a bowler hat made of black felt with lining on the edges of black cotton material. The brim is slightly turned up on the sides. The crown has a black corded band with a bow at one side. There is a circle of air holes on the side of the hat. Inside there is leather lining with some information on the maker on the inside base. .3 This is a hat box lid with a leather covering over cardboard. It is a spherical shape with some side damage where the leather is peeling. There is a leather strap handle with a metal buckle. There are remnants of travel labels pasted on to the lid. .4 This is a hat box made of leather with a metal lock on one side. It has remnants of paper travel labels on the sides. Inside the box is an insert made of maroon-coloured cardboard for storing the top hat. This insert has a leather strap to stabilize the hat. There is a name on the base of the box written on a piece of adhesive plaster. .1 J.H.H. Woodrow & Sons Hat Manufacturers to H.M. the King 13 Market St Manchester, 8 Castle St Liverpool, 45 Piccadilly London, 42 Cornhill, London, 11 Gordon St Glasgow, 40 Westmoreland St Dublin, Made in England Lincoln, Stuart & Coy Proprietary Limited Flinders St Melbourne .2 The Tropical Hat .3 Midland Railway .4 Dunedin, F.H.Moreton doctor john henderson, warrnambool, history of warrnambool, top hat

This set was given by the Warrnambool City Council Councillors to Horace Lawson on the occasion of his marriage in 1898. Horace Edward Lawson was the son of Susan and Thomas Lawson. The latter at one time had a drapery business in Liebig Street. Horace Lawson was the Town Clerk of Warrnambool from 1893 to 1918. He was a keen cyclist and a member of the Warrnambool Volunteer Artillery Corps. In 1918 Lawson was appointed the Secretary of the Municipal Association of Victoria, a Melbourne appointment. This set is of considerable interest as it was presented to Horace Lawson, notable in Warrnambool’s history as a long-serving and successful Town Clerk. This silver-plated tea and coffee set has four items – coffee pot, tea pot, sugar basin and milk jug. All have the same etched decorative patterns on the sides and the lids and all have handles attached with a nut and a bolt. The tea pot and the coffee pot have the maker’s marks on the bases and there is an inscription on the side of the sugar basin. The lids of the coffee pot, tea pot and milk jug are hinged. ‘W. Mammatt & Sons Sheffield’ ‘Presented to H. E. Lawson Esq. Town Clerk by the Mayor & Councillors of Warrnambool on the Occasion of his Marriage Sept. 1898’horace lawson, history of warrnambool, silver tea set

Cupboard, wood, one hinged door with knob and hinged lid. Round opening under lid. One shelf. Small plaque attached. Cabinet work by C F Rojo & Sons."Cabinet work by C F Rojo & Sons"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Gis Gervasono served in Northern Australia and was in Darwin for the bombing.Black and white photograph of Gus Gervasoni in AIF Uniform, and his son and wife. This photograph was taken before his World War 2 departure. gus gervasoni, aif, world war two, chocco, chocolate soldier, conscript, john hogan gervasoni, elizabeth gervasoni, george gervasoni, elizabeth hogan

This item is from the ‘Pattison Collection’, a collection of books and records that was originally owned by the Warrnambool Mechanics’ Institute, which was founded in Warrnambool in 1853. By 1886 the Warrnambool Mechanics’ Institute (WMI) had grown to have a Library, Museum and Fine Arts Gallery, with a collection of “… choice productions of art, and valuable specimens in almost every branch and many wonderful national curiosities are now to be seen there, including historic relics of the town and district.” It later included a School of Design. Although it was very well patronised, the lack of financial support led the WMI in 1911 to ask the City Council to take it over. In 1935 Ralph Pattison was appointed as City Librarian to establish and organise the Warrnambool Library as it was then called. When the WMI building was pulled down in 1963 a new civic building was erected on the site and the new Warrnambool Library, on behalf of the City Council, took over all the holdings of the WMI. At this time some of the items were separated and identified as the ‘Pattison Collection’, named after Ralph Pattison. Eventually the components of the WMI were distributed from the Warrnambool Library to various places, including the Art Gallery, Historical Society and Flagstaff Hill. Later some were even distributed to other regional branches of Corangamite Regional Library and passed to and fro. It is difficult now to trace just where all of the items have ended up. The books at Flagstaff Hill Maritime Village generally display stamps and markings from Pattison as well as a variety of other institutions including the Mechanics’ Institute itself. RALPH ERIC PATTISON Ralph Eric Pattison was born in Rockhampton, Queensland, in 1891. He married Maude Swan from Warrnambool in 1920 and they set up home in Warrnambool. In 1935 Pattison accepted a position as City Librarian for the Warrnambool City Council. His huge challenge was to make a functional library within two rooms of the Mechanics’ Institute. He tirelessly cleaned, cleared and sorted a disarrayed collection of old books, jars of preserved specimens and other items reserved for exhibition in the city’s museum. He developed and updated the library with a wide variety of books for all tastes, including reference books for students; a difficult task to fulfil during the years following the Depression. He converted all of the lower area of the building into a library, reference room and reading room for members and the public. The books were sorted and stored using a cataloguing and card index system that he had developed himself. He also prepared the upper floor of the building and established the Art Gallery and later the Museum, a place to exhibit the many old relics that had been stored for years for this purpose. One of the treasures he found was a beautiful ancient clock, which he repaired, restored and enjoyed using in his office during the years of his service there. Ralph Pattison was described as “a meticulous gentleman whose punctuality, floorless courtesy and distinctive neat dress were hallmarks of his character, and ‘his’ clock controlled his daily routine, and his opening and closing of the library’s large heavy doors to the minute.” Pattison took leave during 1942 to 1945 to serve in the Royal Australian Navy, Volunteer Reserve as Lieutenant. A few years later he converted one of the Museum’s rooms into a Children’s Library, stocking it with suitable books for the younger generation. This was an instant success. In the 1950’s he had the honour of being appointed to the Victorian Library Board and received more inspiration from the monthly conferences in Melbourne. He was sadly retired in 1959 after over 23 years of service, due to the fact that he had gone over the working age of council officers. However he continued to take a very keen interest in the continual development of the Library until his death in 1969. The Pattison Collection, along with other items at Flagstaff Hill Maritime Village, was originally part of the Warrnambool Mechanics' Institute’s collection. The Warrnambool Mechanics’ Institute Collection is primarily significant in its totality, rather than for the individual objects it contains. Its contents are highly representative of the development of Mechanics' Institute libraries across Australia, particularly Victoria. A diversity of publications and themes has been amassed, and these provide clues to our understanding of the nature of and changes in the reading habits of Victorians from the 1850s to the middle of the 20th century. The collection also highlights the Warrnambool community’s commitment to the Mechanics’ Institute, reading, literacy and learning in the regions, and proves that access to knowledge was not impeded by distance. These items help to provide a more complete picture of our community’s ideals and aspirations. The Warrnambool Mechanics Institute book collection has historical and social significance for its strong association with the Mechanics Institute movement and the important role it played in the intellectual, cultural and social development of people throughout the latter part of the nineteenth century and the early twentieth century. The collection of books is a rare example of an early lending library and its significance is enhanced by the survival of an original collection of many volumes. The Warrnambool Mechanics' Institute’s publication collection is of both local and state significance. Portugal and Its People Author: W. A. Salisbury Publisher: T Nelson and Son Date: 1893Label on spine cover with typed text PAT 946.9 SAL Pastedown front endpaper has sticker from Warrnambool Mechanics Institute and Free Library covered by a sticker from Corangamite Regional Library Service warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, shipwrecked-artefact, book, pattison collection, warrnambool library, warrnambool mechanics’ institute, ralph eric pattison, corangamite regional library service, warrnambool city librarian, mechanics’ institute library, victorian library board, warrnambool books and records, warrnambool children’s library, great ocean road, portugal and its people, w. a. salisbury

Black and white photo of Mr. George Ireland and son, Donald. Orchardist of Gillies Street, Mitcham.ireland, george, donald

Kelvin Company History: The origins of the company lie in the highly successful, if strictly informal, the relationship between William Thomson (1824-1907), Professor of Natural Philosophy at Glasgow University from 1846-1899 and James White, a Glasgow optical maker. James White (1824-1884) founded the firm of James White, who was an optical instrument maker in Glasgow in 1850. He was involved in supplying and mending apparatus for Thomson's university laboratory and working with him on experimental constructions. White was actually declared bankrupt in August 1861 and released several months later. In 1870, White was largely responsible for equipping William Thomson's laboratory in the new University premises at Gilmore hill. From 1876, he was producing accurate compasses for metal ships to Thomson's design during this period and this became an important part of his business in the last years of his life. He was also involved in the production of sophisticated sounding machinery that Thomson had designed to address problems encountered laying cables at sea, helping to make possible the first transatlantic cable connection. At the same time, he continued to make a whole range of more conventional instruments such as telescopes, microscopes and surveying equipment. White's association with Thomson continued until he died. After his death, his business continued under the same name, being administered by Matthew Edwards (until 1891 when he left to set up his own company). Thomson, who became Sir William Thomson and then Baron Kelvin of Largs in 1892, continued to maintain his interest in the business after James White's death in 1884, raising most of the capital needed to construct and equip new workshops in Cambridge Street, Glasgow. At these premises, the company continued to make the compass Thomson had designed during the 1870s and to supply it in some quantity, especially to the Admiralty. At the same time, the firm became increasingly involved in the design, production and sale of electrical apparatus. In 1899, Lord Kelvin resigned from his University chair and became, in 1900, a director in the newly formed limited liability company Kelvin & James White Ltd which had acquired the business of James White. At the same time Kelvin's nephew, James Thomson Bottomley (1845-1926), joined the firm. In 1904, a London branch office was opened which by 1915 had become known as Kelvin, White & Hutton Ltd . Kelvin & James White Ltd underwent a further change of name in 1913, becoming Kelvin Bottomley & Baird Ltd . Hughes Company History: Henry Hughes & Sons was founded in 1838 in London as a maker of chronographic and scientific instruments. The firm was incorporated as Henry Hughes & Sons Ltd in 1903. In 1923, the company produced its first recording echo sounder and in 1935, a controlling interest in the company was acquired by S Smith & Son Ltd resulting in the development and production of marine and aircraft instruments. Following the London office's destruction in the Blitz of 1941, a collaboration was entered into with Kelvin, Bottomley & Baird Ltd resulting in the establishing Marine Instruments Ltd. Following the formal amalgamation of Kelvin, Bottomley & Baird Ltd and Henry Hughes & Sons Ltd in 1947 to form Kelvin & Hughes Ltd., Marine Instruments Ltd then acted as regional agents in the UK for Kelvin & Hughes Ltd who were essentially now a part of Smith's Industries Ltd founded in 1944 and the successors of S Smith & Son Ltd. Kelvin & Hughes Ltd went on to develop various marine radar and echo sounders supplying the Ministry of Transport, and later the Ministry of Defence. The firm was liquidated in 1966 but the name was continued as Kelvin Hughes, a division of the Smiths Group. In 2002, Kelvin Hughes continues to produce and develop marine instruments for commercial and military use. This model compass is a good example of the commercial type of instruments made by Kelvin & Hughes after the world war 2, it was made in numbers for use on various types of shipping after the second world war and is not particularly rare or significant for it's type. Also it was made no earlier than 1947 as the firms of Kelvin, Bottomley & Baird Ltd and Henry Hughes & Sons Ltd who took over from Smith & Sons were not amalgamated until 1947. Given that Smith and Sons is engraved on the compass with Kelvin & Hughes it can be assumed that this compass was made during the company's transitional period to Kelvin & Hughes.Compass, marine or ship's card compass, gimble mounted, with inscriptions. Type is Lord Kelvin 10 inch compass card. Made in Great Britain by Kelvin Hughes Division of S. Smith & Sons (England) Ltd. "LORD KELVIN 10.", "COMPASS GRID", "MANUFACTURED IN GREAT BRITAIN BY", "KELVIN HUGHES DIVISION", "S. Smith & Sons (England) Ltd".flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, marine compass, gimble compass, ship's compass, lord kelvin compass, smith and sons england ltd, henry hughes & son ltd london england, kelvin bottomley & baird ltd glasgow scotland, kelvin & hughes ltd, navigation instrument, scientific instrument, william thomson, james white, baron kelvin of largs

In times past the only way to measure a ship’s speed was to throw a wood log into the water and observe how fast it moved away from the ship. In the 16th century, the log was fastened to a rope knotted at set intervals. The log was thrown over the stern (back) of the vessel and a crew member counted the number of knots that were paid out in a set time. From this, they could estimate the vessel's speed through the water. This was known as streaming the log and is also the derivation of the knot as a measurement of nautical speed. Various manufacturers of nautical equipment had sought over the years to perfect the operation of determining a ship's speed and it wasn't until Thomas Walker and his son Ferdinand developed a mechanical system that eventually made this task became easy for marine navigators. Thomas Walker & Son were internationally renowned in the manufacturing of ship logs the founding father, Thomas Walker (1805–1871), an engineer in Birmingham, patented his mechanical log in 1878 which was a recording instrument that attached to a rail at the stern of a vessel connected by a long cord with a rotor which was towed behind the ship. The instrument dial then recorded the distance travelled. Thomas Walker first went into business to manufacture stoves at 58 Oxford Street Birmingham. Walker’s self-feeding stove was widely lauded at the Paris Exhibition of 1855, winning a prize medal and kickstarting the first of many notable innovations for the Walker family's manufacturing business. However, it wasn’t until working on an earlier ship’s log model invented by his Uncle that Thomas Walker became interested in the further development of this device, used to ascertain a ship’s speed. Walker continued to improve on the common log for the company of Massey & Sons and these improvements were deemed revolutionary. This log became a firm favourite of the West India Association (a British-based organisation promoting ties and trade with the British Caribbean), being the most common log in use for two generations. It took until 1861 for Thomas Walker and his son, Thomas Ferdinand Walker (1831-1921) to patent the first Walker log of many. Together, with the introduction of the A1 Harpoon Log two years later, they established the Walker Log Business as a force to be reckoned with. By his passing in 1871, Thomas Walker Snr had not only founded a family business with considerable staying power but also instilled a tradition of public service. Having sat as a representative on the Birmingham Town Council for 15 years and played an active role in public works, he was soon given the nickname of ‘Blue Brick Walker’. Much like his father, Thomas Ferdinand Walker changed the face of the maritime industry. His patent of 1897, the ‘Cherub’ log, was a notable departure from the past providing a far more accurate reading and replacing the majority of logs of the age. They were the first to produce an electric log (Trident) and the Walker factory was one of the first to introduce the 48-hour work week for employees.The ship log was invented and made by a significant marine instrument maker and innovator of machinery. It demonstrates the huge leap taken to improve navigational accuracy at sea with an instrument that was in use for decades.Ships Log, Walker Trident electric motor, in wooden box with instructions inside box. The motor dial with electric cord is still inside box.Inscription "Admiralty patent number 3332" and "Walker Trident Electric Ship Log (Mark III), 15-25 volt". On top of lid, hand written, is "G TAYLOR"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, ships log, thomas walker & son, electric ships log, marine navigation, thomas ferdinand walker, ship log

Thomas Walker & Son was internationally renowned in the manufacturing of ships logs, founding father, Thomas Walker (1805–1871), an engineer in Birmingham, patented a mechanical log in 1878 which was a recording instrument that attached to a rail at the stern of a vessel connected by a long cord with a rotor which was towed behind the ship. The instrument dial recorded the distance travelled. Thomas Walker first went into business to manufacture stoves at 58 Oxford Street Birmingham. Walker’s self-feeding stove was widely lauded at the Paris Exhibition of 1855, winning a prize medal and kick starting the first of many notable innovations for the Walker family's manufacturing business. However, it wasn’t until working on an earlier ships log model invented by his Uncle that Thomas Walker became interested in the further development of this device, used to ascertain a ship’s speed. Walker continued to improve on the common log for the company of Massey & Sons and these improvements were deemed revolutionary. This log became a firm favourite of the West India Association (British-based organisation promoting ties and trade with the British Caribbean). and the most common log in use for two generations. It took till 1861 for Thomas Walker and his son, Thomas Ferdinand Walker (1831-1921) to patent the first Walker log of many. Together, with the introduction of the A1 Harpoon Log two years later, they established the Walker Log Business as a force to be reckoned with. By the time of his passing in 1871, Thomas Walker Snr had not only founded a family business with considerable staying power but also instilled a tradition of public service. Having sat as a representative on the Birmingham Town Council for 15 years and played an active role in public works, he was soon given the nickname of ‘Blue Brick Walker’. Much like his father, Thomas Ferdinand Walker changed the face of the maritime industry. His patent of 1897, the ‘Cherub’ log, was a notable departure from the past providing a far more accurate reading and replacing the majority of logs of the age. They were the first to produce an electric log and the Walker factory was one of the first to introduce the 48 hour work week for employees. This ship log rotor was invented and made by a significant marine instrument maker and innovator of machinery. It demonstrates the huge leap taken to improve navigational accuracy at sea with an instrument that was in use for decades and still is today. Therefore it is a worthy addition to the Flagstaff Maritime collection as it demonstrates another aspect of maritime navigation.A Walkers Cherub III Patent mechanical ship brass rotor with with four vane's one marked with an anchor and "T. W. Cherub 441", The log is attached to a brass swivel with a short length of rope. Has T W Cherub 441 marked on a vane.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, log rotor, taffrail log, thomas walker, marine technology, marine instrument, navigation, ship speed, measurment

Valentine Series postcard of Postcard, looking from the top of the Nichol and Allen Building in Grenville St looking west. Titled "Sturt St Ballarat" in the top left-hand corner. Has two ESCo trams in the view, with a 3rd outside the town hall. Shows all the buildings on both sides of Sturt St, many flying prominent flags. Postcard by Valentine & Sons, printed in Great Britain. In a note to Ken Magor, Wal Jack has written on the rear: "old type, No. 17 on left and No. 11 on right. Photo taken from Grenville Street looking west about 1912." Yields information about Sturt St looking west from Grenville St about 1912.Postcard, colour, divided back, with a handwritten note on rear.See image 2 for the handwritten note on the rear. tramways, trams, sturt st, postcards, grenville st, tram 17, tram 11, esco

The photograph on the front of the postcard depicts a game of billiards being played in the Billiard Room of the Mission to Seafarers Melbourne. The Flinders Street extension building opened for use in 1917 after relocating from Australia Wharf. The billiard pool was likely made by the Alcock company.The scene on the postcard shows the typical use of the Billiard Room at the Mission to Seafarers Melbourne as well as what is presumably the original layout of the room and gives an insight into men's fashion of the time.Sepia toned postcard with photograph of a man in shirt sleeves taking a shot on the billiard table with a second man standing to the left and rear wearing a hat and watching the shot. There are two seated men to the right of the photograph. The man on the left is wearing a suit including hat, the man on the right is wearing a cap and sitting with his arms crossed. There are three pendant lights above the billiard table and bench seating in front of the window.Printed on the bottom of the front of the postcard: "IN THE BILLIARD ROOM. SEAMEN'S MISSION. MELBOURNE, VICTORIA. REAL PHOTO SERIES M.826" Printer's logo on rear of postcard: "VALENTINES/REAL PHOTO SERIES POSTCARD" Printed sideways on left hand rear of postcard: "Published by the Valentine & Sons Publishing Co. Ltd/Melbourne, Sydney & Brisbane" Printed in right hand corner rear of postcard: "BRANCHES/SYDNEY/LONDON/DUNDEE/DUBLIN/CAPETOWN/MONTREAL/TORONTO" postcard, windows, floorboards, valentine-and-sons-publishing-co-ltd, billiard room, pool table, billiard table, billiard cue, seamen's mission, mission to seafarers, melbourne, flinders street, bench seat, pendant lighting, bentwood chairs, coat rack, valentines postcards, real series postcards, real photo series, m.826, vienna chairs

Photograph probably for promotional purposes, of a "David Sowden & Sons" loom. Photograph was with other photographs in an envelope printed "David Sowden & Sons" among items from Yarra Falls MillPhotograph probably for promotional purposes, of a "David Sowden & Sons" loom.No4textile machinery weaving textile mills textile mills, yarra falls mill david sowden & sons, weaving looms, weaving machinery, textile machinery, weaving, textile mills