Chef doll on wooden stand. Wooden swivelled head on wooden body. White chef hat and apron, blue shirt, grey trousers (all made of cloth). Painted brown shoes. Painted face.Polandtoys, general

This wooden ship's wheel originally had eight spokes but four are no longer in their sockets. One of the spokes has been shaped. Both sides of the wheel have a brass cap over the centre of the hub, covering the wooden hub. The wood is split and cracked, and parts of it have small holes, a sign of being affected by the sea worm. Thick encrustations are on parts of the wheel, showing that it has been on the sea bed for quite some time. The donor is a Warrnambool resident. Years ago he was cray fishing at King Island, which is in Bass Strait, northwest of Tasmania. His craypot got stuck in a reef so a diver helped him by retrieving the craypot for him. While the diver was underwater he also stumbled across the ship's wheel, which he gave to the donor. The Bass Strait is a very narrow route that was difficult and dangerous to navigate in the early 19th century, before good maps, communications and lighthouses were installed. The area, including King Island, is the graveyard of many ships that almost made it to their destination of Melbourne along Australia's treacherous coastline. Around King Island alone, many ships and lives were lost. There is no information about the history of this ship's wheel. Its condition shows that the item has been under the water for a long time. However, there is no evidence that it came from a shipwreck. It could even have been an old ship that could have been scuttled or destroyed as it was no longer useful. The wheel is significant as a sign of shipping around King Island. It is part of the island's history, and of maritime history. It is an example of an item manufactured by hand.Ship's wheel; segment of a wooden ship's wheel. It once had eight spokes but only portions of four spokes remain. The outer centres of the hub and the reinforcing bands around the hub are brass. The wheel is heavily encrusted in parts. It was recovered from an unknown shipwreck in the waters of King Island.great ocean road, warrnambool, shipwreck artefact, artefact, ship's wheel, ship's wheel segment, portion of a ship's wheel, flagstaff hill, maritime museum, maritime village, flagstaff hill divers, marine technology, navigation, steering wheel, eight spoke wheel, king island, craypot, diver

The wooden pattern is part of a set that are stored in a strong wooden crate. It was used at Briggs’ Brass Foundry for making sand casts. The traditional craft of sand casting is over 2000 years old. The handcrafted process produces brass and copper alloy goods that are well suited to marine use; bells, boat hooks, cowls, propellers, handles, lids, rowlocks, hooks, letters, bolts, rail holders, brackets, deck plates, flanges, rudder guides, portholes and covers. Briggs’ Bronze mixture is a copper-based alloy made from local ingots of copper, tin, zinc and lead in carefully measured quantities. The finished product is non-ferrous and can last indefinitely. The crate of patterns was donated by the Briggs family in the early years of Flagstaff Hill, along with other related items such as brassware, tools and machinery. The donated items were displayed in a simulated Brass Foundry in the Village along with other working crafts, trades and services found in a Maritime town. The items were on show from the completion of the building in 1986 until 1994 when the building was repurposed. The patterns represent the trades of foundering and metalwork, both supporting maritime industries such as shipwrights and boatbuilders. Farmers, manufacturers and other local industries also needed the castings made by foundries. The Brass Foundry included a historic Cornish chimney set up as a working model, to tell the story of smelted metal heated in furnaces then be poured into the sand moulds. This chimney was made from specially curved bricks and is now about two-thirds of its full height when originally located at the Grassmere Cheese factory. The craft of sand-casting from carved wooden patterns to create metal is an example of skills from the past that are still used today. The foundry pattern set is significant for its association with brass foundries locally and generally in coastal areas of Victoria. Marine industries such as ship and boat building rely on good quality castings for their machinery, equipment and fittings. Briggs Brass was especially formulated using non-ferrous metals to ensure their longevity. The patterns are associated with the long-running firm Briggs Brass Foundry that specialised in cast goods for the marine industry, ready to supply the needs for once-off or mass-produced items. Their products would have been fitted to sail and steam vessels along coastal Victoria including Warrnambool. Briggs Marine was also a bell-founder specialist and is also associated with the Schomberg Bell at Flagstaff Hill, having restored it to is former state as a fine example of the bell from a luxury migrant vessel from the mid-19th century. Pattern; rectangular wooden block made from laminated sections of wood painted black. A half-cylinder shape was carved into the long side, and a dowel shape was placed at the lower side. The pattern is part of a set of foundry patterns from Briggs Brass Foundry.flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, briggs' bronze, traditional method, trade, sand cast, cast, brass alloy, copper alloy, pattern, mould, foundry, brass foundry, metal foundry, casting, sand mould, sand casting, marine equipment, marine tools, marine fittings, copper tin zinc lead, non-ferrous, non-corrosive, brassware, metalware, foundering, metalwork, maritime, bell founders, ship chandlers, marine products, biggs, briggs family, herbert harrison briggs, h h briggs, george edward briggs, cyril falkiner mckinnon briggs, cyril briggs, briggs & son brass foundry, h h briggs & sons foundry, briggs marine, alliance casting & engineering solutions, grassmere cheese factory, cornish chimney, curved bricks, collingwood, moorabbin, collingwood foundry, moorabbin foundry, 1912

In November 1914, an advertisement was placed in the British national press inviting monetary contributions to a 'Sailors and Soldiers Christmas Fund' which had been created by Princess Mary, the 17 year old daughter of King George V and Queen Mary. The purpose was to provide everyone wearing the King's uniform and serving overseas on Christmas Day with a 'gift from the nation'. The response was overwhelming, and it was decided to spend the money on an embossed brass box, based on a design by Messrs Adshead and Ramsay. The contents varied considerably; officers and men on active service afloat or at the front received a box containing a combinationof pipe, lighter, tobacco and 20 cigarettes and wrappers. Non smokers received a bullet pencil and a packet of sweets instead. Indian troops often got sweets and spices, and nurses were given chocolate.This box is on loan from the grandson of the soldier who it was given to.This box is on loan from Terry Phillips. It belonged to his Grandfather who served at Gallipoli.Princess Mary 1914 Christmas Gift tin. Decorative brass with Princess Mary's profile surrounded by a laurel wreath engraved in the the centre of the lid, with the letter 'M' on both sides. The names of the allied nations are engraved in the corners and on the sides. A sword and scabbard decorate the top side. The lower side is decorated with battleships..At the top a decorative cartouche contains the words "Imperium Britannicum" and one on the lower edge contains the words "Christmas 1914". In small roundels on the corners appear the names "Belgium", "Japan", "Montenegro" and "Servia". "France and "Russia" are written on the short sides.world war one, box, brass box, princess mary 1914 christmas gift, decorative box, anzac, 1914, christmas, gift, princess, mary, russia, belgium, japan, montenegro, servia, france

Pistol holster usually issued to Officers and senior NCO's as part of uniform.Leather pistol holster with attached belt. leather is black on outside and brown on inside. Brass belt buckle with emblem of upraised sword over feathers and branches. Holster has fold over cover with brass studs to clip close. Holster includes built in ammunition compartment and is basically triangular shape.Inside stamped "Wunderlich, Berlin 1963" Inside cover stamped "PP12 or PPB.TL".passchendaele barracks trust, pistol holster

Straight Blade, fuller edge side , 3/4 hand guard "GVR" cypher, ray skin grip - wire bound, sword knot, no scabbard " side outer hand guard "3MD " 300 10/13 Ornate makings decorate the blade including Royal Standards and the makers details"3MD " 300 10/13 By appointment Henry Wilkinson PALL MALL London by Warrent5/6 rvr, 5/6 rvr bhq, sword

The wooden pattern was possibly made for casting a part for Craftman Marine, makers of engines for boats and other machines. It is part of a set that is stored in a strong wooden crate. It was used at Briggs’ Brass Foundry for making sand casts. The traditional craft of sand casting is over 2000 years old. The handcrafted process produces brass and copper alloy goods that are well suited to marine use; bells, boat hooks, cowls, propellers, handles, lids, rowlocks, hooks, letters, bolts, rail holders, brackets, deck plates, flanges, rudder guides, portholes and covers. Briggs’ Bronze mixture is a copper-based alloy made from local ingots of copper, tin, zinc and lead in carefully measured quantities. The finished product is non-ferrous and can last indefinitely. The crate of patterns was donated by the Briggs family in the early years of Flagstaff Hill, along with other related items such as brassware, tools and machinery. The donated items were displayed in a simulated Brass Foundry in the Village along with other working crafts, trades and services found in a Maritime town. The items were on show from the completion of the building in 1986 until 1994 when the building was repurposed. The patterns represent the trades of foundering and metalwork, both supporting maritime industries such as shipwrights and boatbuilders. Farmers, manufacturers and other local industries also needed the castings made by foundries. The Brass Foundry included a historic Cornish chimney set up as a working model, to tell the story of smelted metal heated in furnaces then be poured into the sand moulds. This chimney was made from specially curved bricks and is now about two-thirds of its full height when originally located at the Grassmere Cheese factory. The craft of sand-casting from carved wooden patterns to create metal is an example of skills from the past that are still used today. The foundry pattern set is significant for its association with brass foundries locally and generally in coastal areas of Victoria. Marine industries such as ship and boat building rely on good quality castings for their machinery, equipment and fittings. Briggs Brass was especially formulated using non-ferrous metals to ensure their longevity. The patterns are associated with the long-running firm Briggs Brass Foundry that specialised in cast goods for the marine industry, ready to supply the needs for once-off or mass-produced items. Their products would have been fitted to sail and steam vessels along coastal Victoria including Warrnambool. Briggs Marine was also a bell-founder specialist and is also associated with the Schomberg Bell at Flagstaff Hill, having restored it to is former state as a fine example of the bell from a luxury migrant vessel from the mid-19th century. Pattern; rectangular wooden block with a corner cut diagonally. A five-sided shape has been carved into the centre, with one side curved inwards and slightly shallower than the other sides. The cut-out area is painted black. Three holes are drilled in the cut-out side to align the pattern with another piece of work. A wooden slat is fixed across the diagonal side. The back of the pattern has a handwritten inscription, possibly by two writers. The pattern is part of a set of foundry patterns from Briggs Brass Foundry and is connected to Craftman Marine.In black handwriting: "1 # H AL" Handwritten in a different hand: "CRAFTMAN MARINE" Written the the first hand: BRIGGS" (or "BRICK")flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, briggs' bronze, traditional method, trade, sand cast, cast, brass alloy, copper alloy, pattern, mould, foundry, brass foundry, metal foundry, casting, sand mould, sand casting, marine equipment, marine tools, marine fittings, copper tin zinc lead, non-ferrous, non-corrosive, brassware, metalware, foundering, metalwork, maritime, bell founders, ship chandlers, marine products, biggs, briggs family, herbert harrison briggs, h h briggs, george edward briggs, cyril falkiner mckinnon briggs, cyril briggs, briggs & son brass foundry, h h briggs & sons foundry, briggs marine, alliance casting & engineering solutions, grassmere cheese factory, cornish chimney, curved bricks, collingwood, moorabbin, collingwood foundry, moorabbin foundry, 1912, craftman marine, craftsman marine

Pair of wooden crutches with wooden rests for arm pits. Rubber stoppers on base. Fitted together with binding and nuts and bolts.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

This item is an example of a domestic woodworking tool commonly used before the widespread use of power tools.A wooden rebate plane with a brass adjusting knob. It has a cutting edge, such as a sharpened metal plate attached to a wooden body,woodworking-tool hand-rebate-plane

Vice wooden with wooden handle - is attached to bench with non original part 605mmL x 370mmL handle. Screw 445mmLflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Wooden MOK Degree of Service Mark on metal and wood stand and with wooden cover. The symbol has a green card inside.methodist order of knights

Maybe made during WW 2 when building materials were scarce particularly in country townsLight wooden chair made from wooden packing boxes. Stabilised with bars on the back of the chair and between the four legsUnderneath the seat can be seen impressions that were stamped on the box . The words “Starch” and “boxes” can be read

Nothing is known about the origin. IN 1895 Emma Blanche Annie Dear married Alfred Ernest Wellard, a young Methodist Minister in Tasmania and this was her churn. The Wellards used it in both Tasmania and Victoria. Later, it was handed on to their daughter Winsome Faith when she married Archibald Dufty, a farmer from the Wimmera. By then it was kept as an interesting relic of earlier days, as farming families in the 1920s and 1930s usually made their butter in Cherry butter churns. In the 1980s it was passed on to their daughter, Patricia Gibbons having only been used at several Farm Day Demonstrations in the previous sixty years.Large glass container, iron mechanism with tin lid for container and a wooden paddle. Wooden handle to turn cog mechanism.glass technology, glassware

The carriage was made by William Graham for his grandson, John E. Graham, 386 Mitcham Road, MitchamCarriage has metal roof, wooden ends, wooden sides with six windows, one door, five metal wheels.toys, general, train

Wooden shoes insert with long metal handled shaft for stretching. Wooden insert is in two parts with metal hinge at back.costume accessories, footwear accessories

Round Box to house a Soldiers Belt. Wooden with metal band on bottom. Lid wooden with metal band. Brown in colour.Making on base of box in round stamp-Robertsons Patent Package. Writing on top of box could not be deciphered.

The Observatory on the high point of Mt Corrhanwarrabul was used to take trigonometrical readings from as early as 1850. The area became very popular with tourists as a place to walk and drive to. The SkyHigh restaurant is on the site of the Observatory.Black and white photograph showing a stone base topped with a wooden structure. Two women are posed below the wooden structure.observatory, trig point, skyhigh, mt corrhanwarrabul

Wooden Bellows, small leather centre hole in centre of wooden backing. Handle with leather hanging. Long metal spout. stawell

Mass produced. Owned by Wandin Sebire. Part of bedroom suite.Wooden four drawer dresser, with two small draws on each side. Central mirror surrounded by carved wooden design. bedroom suites, side tables, night cupboards

Cast iron grain sickle with hand-cranked wooden handle, stone grinder head, and 4 wheels, on a wooden base.International Harvestersickles, grinding tools

Two combs . 1 Double sided wooden Afro style comb. 2. Single sided wooden comb "Kunasi"combs, hair care equipment

The SS Diomed was the last ? of the Blue Funnel Line's coal burners and the 4th (of 5 vessels) bearing the name Diomed and built in 1922. She made her last voyage from Australia to England in 1952, where she was broken up. The ship had been in service in Australia for 30 years and as a parting gesture the ship's bell was presented to the Mission by Alfred Holt & Co., the ship's owner. The bell was originally presented to the Port Melbourne Mission to Seafarers. It seems to have been a mark of respect for one of the Mission workers who regularly visited the ship. On closure of the Port Melbourne Mission in the late 20thC , the bell was transferred to the Melbourne facility and has been in permanent residence since then. The bell underscores the strong working relationship between the Mission to Seafarers, as an organisation, and the various companies and agencies that work on the oceans. It also represents the traditional relationship between Australia and England in that seafarers who visited the Mission were once primarily of British backgrounds or descent. While this situation has changed in more recent times, it is that traditional relationship that saw the establishment of the Mission in Australian ports in the first instance.(NB the previous 2 Diomed's had both been sunk in WW1 1915 and 1918 and the re-use of the name indicates it was a well respected name subsequently re-allocated to the 1922. and 1956 vesselsA brass bell with the word "Diomed" embossed on its waist and the word has also been painted black. The bell is mounted overall on a heavy carved wood base with brass dolphins at either side forming a support frame for the brass crossbar mount from which the bell is suspended. The clapper has a pull rope attached to it but the casing of the mounting prevents the bell from being fully rung.Embossed at the waist of the bell: "Diomed". Brass plaque on wooden mounting: "PRESENTED BY/ALFRED HOLT & CO/BLUE FUNNEL LINE/LIVERPOOL ENGLAND/1922-52/APRIL 1953"diomed, blue funnel line shipping, alfred holt & co, bell, ship's bell, dolphins, mission to seafarers, r. stewart murray, randall stewart murray, lay reader, port melbourne, 1953

Hair and beard clipping was frequently carried out at home prior to WW11 and often much later in rural areas. Manual hair clippers were readily available for purchase. The Alcoso company started as steel manufacturers by Alexander Coppel in 1821. Alcoso is an acronym for Alexander Coppel Solingen. They were very successful and opened a second manufacturing facility sometime in the 1850s. They manufactured pipes, rolled steel, wire, tableware, daggers, swords, knives and razors. They started manufacturing razors in the 1850s. The company is most famous for their swords. The Coppel family that Alexander donated millions of marks to charity including building an orphanage, a school for the disadvantaged, and a recreation centre. They headed various social rights groups. They were leading citizens of Solingen. The family was Jewish and the company was Aryanized in 1936. Alexander Coppel and his family were sent to a concentration camp in 1941 along with the remaining Solingen Jews. He died there of starvation in 1942 at the age of 77.This kind of hair clippers were a common household item in the early 20th century. They are representative of an important Jewish company prior to WW2.2 sets of hairclippers made from steel alloy. The arms of the clippers are hinged and can be adjusted with a wing screw. The arms are squeezed together and released. like scissors to operate,On box lid: "Haarschneide-Maschine/ Hairclipper/ "Alcoso"/ Solingen / Tondeuse/ Maquina para cortar el pelo" Translation hair cutting machinehair clippers, alcoso company, alexander coppe, personal items

Wooden shield with silver central boss, 10 small silver shields surrounding it. Silver banner across the top. This wooden shield is back with a second wooden shield, this one with a silver plate with donation record at the bottom.FISKEN CUP ASSOCIATION Won by / YENDON / No 719 / 1971 WON BY / YENDON / No 719 / 1972 THIS SHIELD WAS PRESENTED BY / CR & MRS A.C.W.FISKEN C.M.G, O.B.E, M.C / IN NOV 1938 / NEW SHIELDS FOR ENGRAVING WERE / RENEWED BY MRS A.C.W.FISKEN / IN APRIL 1971yendon state school, yendon public school, fisken cup, school sports, acw fisken

Wooden and metal sign with imprint of SANDHURST put on decorative background. Metal sign attached to a wooden backing. Attached by six screws and two nails. Wooden backing has a cream painted 2 cm border.signs, advertising