Sauce came in bottles bought at the local grocery store or at a large city store on a shopping expedition. The shape and size of the bottles changed as did the stopper used to seal it.Historical: Change of bottles - shape, size, stopper, embossing Aesthetic: Display showing shape and embossing.Medium sized clear glass sauce bottle with straight sides two thirds of the way up then tapering to the neck and opening. Sealed by cork which is loose inside the bottle. Embossed at the base. Base: Common Seal 'A' with 'G' at top and 'M' below inside the A. Underneath and across the middle 'M559' and beneath 'M' '211' on edgeglass bottle, sauce, household

Sauce came in bottles bought at the local grocery store or at a large city store on a shopping expedition. The shape, colour, size of the bottles changed as did the stopper used to seal it.Historical: Change of bottles - shape, glass, stopper, size, embossing Aesthetic: Display shown embossing and shapeClear brown glass bottle of medium size used for sauce. Sealed with a glass stopper that has cork on the outside. It has straight sides for nearly two thirds to the top then tapers quickly into a long straight neck with a lip near the opening. Inside the opening is a lip. Embossed on base.Base: across the middle 'M 311' and below that 'M'glass bottle, household, glass cork stopper, sauce

Sauce came in bottles bought at the local grocery store or in a large city store on a shopping expedition. The shape and size of the bottles changed as did the stopper used to seal it. The bottles were re cycled remaining the property of the manufacturer. History of Rosella Pres. & Manuf. Co. Ltd.Historical: Change of bottles - shape, glass, embossing, use Aesthetic: Display showing embossing and shape. Clear glass bottle used for sauce. Grooved straight sides two thirds of the way up, tapering to the lip at the top of the neck and screw top. Embossed on base around the circumference and in the middle. The print is in capital letters. A few very small bubbles in the glass. Base: 'The Prop. of Rosella Pres & Manf Coy Ltd' around the circumference. Base: Inside the above inscription: '15' at top, 'Reg. No. 25701'across the middle and below 'ISM - 100'sauce, glass bottle, rosella pres. & manuf. co. ltd, household

Sauce and coffee / chicory was stored in bottles bought at the local grocery store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it.Historical: Change of bottles - shape, glass, stopper, embossing and use. Aesthetic: Display showing embossing and shape.Clear slightly green glass bottle used for storing sauce, coffee or chicory. The base is square with a slight indent inwards and has embossing. The straight sides go two thirds of the way, taper quickly to the neck and then form a lip and opening for a cork stopper. Glass badly blown with a defect about one quarter of the way up.Base: Common seal: 'A' with 'G' at top and 'M' below inside the 'A'. 'M711' across the middle and 'M' underneath. 'F18' on edge of one side.glass bottle, sauce, coffee, chicory

This bottle was bought at the local chemist or a chemist in a larger city on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it. History of Rawleigh's.Historical: Change of bottles - shape, glass, stopper, embossing, use Aesthetic: Display showing embossing and shape.Clear glass bottle with rectangular base and straight sides three quarters of the way up tapering into the neck and then the screw top opening. The front face is heavily embossed with maker's name signed across the face. The back and side faces are flat while the front is indented and framed with a curved top. The base is embossed and slightly indented.Front side: "I Rawleigh's I" Base: Common seal 'A' with 'G' on top and 'M' underneath inside the 'A', 'G437' and an 'O'chemist, rawleigh's, medicine, glass bottle

Medicines came in bottles sold by the chemist locally or at a large city chemist store on a shopping expedition.The shape and colour the the bottles changed as did the stopper used to seal it. Use of linseed oil and milk of magnesia.Historical: Change of bottles - shape, glass, stopper, embossing and use. Aesthetic: Display showing colour and shape.Clear brown glass bottle used for medicine - possibly linseed oil or milk of magnesia. It has straight sides three quarters of the way up tapering to the neck ending with a lip and a screw top. Rectangular base with embossing. 3 sides and base are slightly indented. The 4th side is flat with an embossed '2' at the bottom in the middle. Side: '2' Base: 'G 374' followed by the common seal 'A' with 'G' and 'M' inside the 'A'chemist, medicines, brown glass bottle, liniseed oil, milk of magnesia

Medicines win the form of pills were stored in bottles sold by the chemist either locally or in larger cities visited during a shopping expedition. The shape of bottles changed as did the stoppers used to seal them.Historical: Change of bottles - shape, glass, stopper, embossing, use. Aesthetic: Display showing embossing and shape especially if in good conditionClear brown glass bottle with base consisting of 2 long sides (front and back) and 2 shorter sides at each end joined by two even shorter sides (as if to cut corners). Tapered sharply to form a neck and lip and then a screw top opening. Embossed on base. Used for pills or reviving salts.Base: Common Seal: 'A' with 'G' and 'M' inside top and bottom respectively. 'F 1101' followed by 'M' On the side of the base at right angles to the above: '947'brown glass bottle, chemist, pills, reviving salts

Perfume, lavender water and bath salts were sold by chemists either locally of in larger cities visited on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it.Historical: Change of bottles - shape, glass, stopper, embossing, use Aesthetic: Display showing shape and size of bottleClear glass bottle with rectangular base and straight sides nearly three quarters of the way up tapering in 3 waves to a ridged neck and then a screw top. Visually but inside the glass at the base seems to be indented showing a lopsided hill bearing to one side.Base: '12' within an oval shape chemist, perfume, lavendar water, bath salts, glass bottle

Medicine came in bottles bought at the local chemist or at a large city chemist on a shopping expedition. The shape and contents changed as did the stopper used to seal it. History of Bonnington's Irish Moss.Historical: Change of bottles - shape, glass, stopper, embossing, use. Aesthetic: Display showing embossing and shape Small clear brown glass bottle used for medicine. Rectangular shape with heavy embossing at the front. Narrower sides taper to the lip at the opening. Also has a lip around the opening.On front side: 'Bonnington's / Irish Moss / Coughs & Colds' chemist, medicine, glass bottle, bonnington's, irish moss, coughs, colds

Bottles were bought locally or in larger city stores on a shopping expedition.Historical: Change of bottles - shape, size and use. Aesthetic: Display showing shape, colour and sizeSmall round brown opaque glass bottle with straight sides and sealed by a rusty screw top lid. Embossing on the base.Base: Common seal at top 'A' with 'G' and 'M' inside the A and across the middle 'G 764' and underneath 'M'brown glass bottle, metal screw top lid

Medicine came in bottles bought at the local chemist or at a large city chemist on a shopping expedition. The shape and contents changed as did the stopper used to seal it. History of Bonnington's & Irish Moss.Historical: Change of bottles - shape, glass, stopper, embossing and use. Aesthetic: Display showing embossing and shape. Small clear brown glass bottle used for medicine. Rectangular shaped with heavy embossing at front. Narrower sides taper to lip at opening. Also has lip around the opening.Front side: 'Bonnington's / Irish Moss / Coughs & Colds'glass bottle, chemist, medicine, irish moss, bonnington's, coughs, colds

Medicine came in bottles bought at the local chemist or at a large city chemist on a shopping expedition. The shape and contents changed as did the stopper used to seal it. History of Bonnington's and Irish MossHistorical: Change of bottles - shape, glass, stopper, embossing and use Aesthetic: Display showing embossing and shapeSmall clear brown glass bottle used for medicine. Rectangular shape with heavy embossing at the front. Narrower sides taper to the lip at the opening. It has a very rusted-on screw lid which is metal.Front side: 'Bonnington's / Irish Moss / Coughs & Colds'glass bottle, bonnington's, medicine, chemist, irish moss, coughs, colds

Bottles of milk were bought at a local store. The measurement of liquid was in pints and money in pence pre 1966. Bottles were returned to the manufacturer who reused the bottle. To encourage the return of bottles, collectors were given 7 pence per bottle. TB was tested in the milk at this time and the milk was pasteurised. History of the Kiewa Company.Historical: Dairy farmers lived in the Kiewa Valley and sent their milk to the Kiewa Factory to be pasteurised and TB tested. The bottles and tops changed colour & design regularly. Aesthetic: Display showing variations of shape, embossing, and stencil.Narrow necked clear glass bottle used to carry one imperial pint of milk. Embossed on bottom near base and on base. Blue stencilled writing / print on opposite sides of the bottle.Side: Embossed: Inside embossed circle is '6' above '19'. and underneath this: One Imperial pint. Base: Embossed: Common Seal - 'A' with 'G' and 'M' inside the A and in the middle 'ISM 229' and below that '2' Stencil on side: 'Kiewa' signature and underneath printed 'Pasturised / And TB Tested Milk' / 'Use' (written) and then printed 'Kiewa Butter / Cream and / Ice cream Mix' Stencil on the opposite side: '7d Deposit On / This Bottle'kiewa, dairy, milk, butter, cream, ice-cream, farmers

Cream was stored and sold in bottles and bought at a local store. History of Haberfield's. The measurement of liquids was in pints and money in pence (d) pre 1966. Bottles were returned to the manufacturer who reused the bottle. To encourage the return of bottles, collectors were given 3d (pence) per bottle. Historical: Dairy farmers living in the Kiewa Valley, sent their milk to be separated into cream by a Dairy company and then sold to the public. Aesthetic: Display showing variations of shape, embossing and stencillingSmall clear glass bottle containing one third of a pint and used to carry cream. it tapers to a lip at the neck. On one side and the base it is heavily embossed. Under the embossing on the side it is stencilled in red and black words and outline of a picture of a happy man wearing a tie pointing to the writing.Base: Common Seal with 'A' and 'G' and 'M' inside the 'A'. under which is '91/6' under which is' ISM - 707' Side: embossed: Third Pint Side: stencilled: Haberfield's (red) / always red (black) / Pasteurised (red on black) / Cream (white on black) Opposite side: stencilled: 3d Deposit / On This Bottle (all in red)dairy, farmers, haberfield's, cream

Bottled milk was bought at the local store. The bottles were re cycled and remained the property of the manufacturer. to encourage their return a deposit was usually paid on them. Pre 1966 liquids were measured in pints.Historical: Dairy farmers lived in the Kiewa Valley and sent their milk to be pasteurised and bottled by a local Dairy Company. The bottles changed shape, size and embossing. Aesthetic: Display showing variations of shape, embossing and size Clear glass small bottle with straight sides nearly two thirds up from the base tapering gently to the opening which has a thick long lip before the opening. Heavy embossing around the circumference on each side where tapering begins. Light embossing on the base.Half Pint Milk This Bottle Belongs to Milk Bottles Recovery Ltd. And Cannot be Used With Out Written Permission Base: '2' Common Seal 'A' with 'G' and 'M' inside the A / '8' / '11' / 'M163'milk, dairy, farmers, kiewa, milk bottles recovery ltd

This bottle was bought at a chemist shop either locally or at a bigger city on a shopping expedition. The lattice pattern was used for poisonous contents. It was sealed with a cork.Historical: Bottles changed in size, seal and use. Aesthetic: Display showing embossing, shape and size of the bottleRound, amber bottle with small neck and sealed with a broken cork. Heavily embossed with lattice design covering one side of the bottle above which and at the shoulder of the bottle is embossed print in capital letters. On the back at the shoulder of the bottle is embossed 'poison'. Front: 'Not To Be Taken" Back: "Poison" Base: "L 670" above "M' in the middle and "A" with 'G' and 'M' inside the "A" (common seal) underneathamber glass bottle, chemist, poison

Milk bottles were bought at the local store. Metric measures were introduced in Australia in 1966. Bottles were recycled and remained the property of the manufacturer.Dairy farmers live in the Kiewa Valley and send their milk to the local dairy to be pasteurised and bottled. Historical: Bottles changed - shape, size, embossing and seal Aesthetic: Display showing bottles of different shape, size, embossingClear glass milk bottle with straight sides three quarters of the way up tapering gently to the opening. The taper sides are heavily embossed with print in capital letters. The circumference of the base is embossed with short straight lines in the direction of the edge to middle.On each side: "Pasteurised / Wash and Return / 600 ml Milk The fourth line continues underneath around the circumference: Use not permitted without written - permission owner milk bottles recovered.clear glass bottle, milk, dairy, milk bottles recovered, kiewa valley farmers

This bottle was used in the Tawonga District General Hospital which was built in the 1950's specifically for the increase in population due to the Kiewa Hydro Scheme.Clear glass bottle with straight sides tapering in to a short thin neck with a screw top.Base: Top - Common Seal; Middle 'J835'; Bottom 'M'medical, hospital, chemist

This bottle was used in the Tawonga District General Hospital which was built in the 1950's specifically for the increase in population due to the Kiewa Hydro Scheme. It was used for first aid for the treatment of bruises and joints.Small clear brown glass hexagonal bottle with black screw lid. The lid is grooved for easier opening. On the 3 front sides is a torn white label with red writing, green borders and at the bottom (of the label) black back ground and white writing. On the back is heavily embossed 'Not To Be Taken' and on each side face embossed 4 vertical lines. (to indicate poison). The base is embossed.Label: A lot of small writing in red and 'Tincture of / Iodine'. Below in white writing 'Wholesale Drug Co. / Sydney' Back: 'Not to be Taken' Base: Common Seal / S 1006medical, tincture of iodine, bruises and joints, first aid

This bottle was used in the Tawonga District General Hospital which was built in the 1950's specifically for the increase in population due to the Kiewa Hydro Scheme.Clear glass bottle with a triangular base with rounded corners tapering to a narrow neck for a cork. On one face there is heavy embossing. Lightly embossed on the base. The join of both halves does not continue through the lip at the top.One face: 'R. Harper / & Co Ltd' Base: 'Common Seal / L563 /M'medical, hospital, chemist, r. harper & co. ltd.

This bottle was used in the Tawonga District General Hospital which was built in the 1950's specifically for the increase in population due to the Kiewa Hydro Scheme.Small clear glass bottle with a square base. The sides taper to the screw top opening with a bakelite lid which has embossed lines on it for easy opening. The top is on very tightly and a brown solid remains inside one quarter of the way up from the base. On 1 side is a yellow label with black writing and light blue back ground with white writing at the bottom (of the label). The label is complete but falling off. Base is embossed with numbers unreadable inside an embossed circle.Label: 'Evans'/ 50 ml / Nobecutane / Trade Mark / Marking Ink / A plastic ink for the / pre-operative mark- / ing of skin surfaces. / Inflammable / Keep well sealed / and in a cool place 'medical, hospital, nobecutane marking ink, evans suppolies ltd., medical operations

This bottle was used in the Tawonga District General Hospital which was built in the 1950's specifically for the increase in population due to the Kiewa Hydro Scheme.Clear glass Baby's Feeding Formula bottle with a gauge on 2 faces - 1 with mls and 1 with ounces. The bottle holds 240 ml and 8 ounces. The third side also has heavy embossing as has the base. The base is rectangular with curved corners. The sides are straight with a gradual taper to a narrow neck which has a heavy lip on it (for the teat).Front: At the top 240 ml, 200, 150, 100, 50 with horizontal lines marking every 10 ml. downwards. Side: 8.7.6.5.4.3.2.1. with a horizontal line in between each number and 'ounces' along side of this gauge. Other side: 'Agee /Pyrex / Feeder' (cursive writing with word in middle printed) Base: Common Seal / IS 998 / 7baby's feeding bottle, formula bottle, hospital

This bottle was used in the Tawonga District General Hospital which was built in the 1950's specifically for the increase in population due to the Kiewa Hydro Scheme.Clear glass bottle with glass stopper that has string around it and the bottle so remaining attached when taken out. The fitted part of the stopper is opaque as is that part of the neck into which it fits. The neck is short. Base is embossed. Used for anaesthetic possibly ether. It may have had a special cork with dripper on it to drop on the mask.Base: 'L 75 / M / Common Seal'anaesthetic bottle, medical, hospital

The Reeves family emigrated from Dublin arriving in Geelong around 1845. The established their cordial business in Warrnambool in mid 19th century and operated well into the 20th century.The Reeves family were one of a number of drink manufacturers which operated in Warrnambool in the late 19th century and 20th century. Clear glass cylindrical bottle with neck. The dark grey stopper has an internal screw with rubber seal.Embossed on side of bottle "This bottle always remains the propertyof /R.V. REEVES/WARRNAMBOOL." Lined measure mark on side of bottle. "32" either side of lip.Manufacturers marks on bottom.reeves, warrnambool, cordial bottle

This bottle was one of the items salvaged from the wreck of the Fiji in 1891. Joseph Bosisto began manufacturing Eucalyptus Oil in Australia from 1854. This bottle is marked ‘J. BOSISTO”, which probably dates it from 1885 when the company J. Bosisto & Co. was formed. The marking on the bottom of the bottle “GERMAN/B_ _ E” could mean that the bottle was imported by J. Bosisto from Germany. In the early years bottles were imported from overseas countries including England and Germany. In 1872 the Melbourne Bottle Works was established to supply the bottles locally and more cheaply but had difficulty keeping up with the supply. From 1865 Australian-made Bosisto’s Eucalyptus Oil began to be exported to England then later to Germany and other countries. Bosisto’s Eucalyptus Oil won many prizes at exhibitions between 1854 – 1891. The three-masted iron barque Fiji had been built in Belfast, Ireland, in 1875 by Harland and Wolfe for a Liverpool based shipping company. The ship departed Hamburg on 22nd May 1891 bound for Melbourne, under the command of Captain William Vickers with a crew of 25. The ship’s manifest shows that she was loaded with a cargo of 260 cases of dynamite, pig iron, steel goods, spirits (whisky, schnapps, gin, brandy), sailcloth, tobacco, coiled fencing wire, concrete, 400 German pianos (Sweet Hapsburg), concertinas and other musical instruments, artists supplies including brushes, porcelain, furniture, china, and general cargo including candles. There were also toys in anticipation for Christmas, including wooden rocking horses, miniature ships, dolls with china limbs and rubber balls. On September 5th, one hundred days out from Hamburg in squally and boisterous south west winds the Cape Otway light was sighted on a bearing differing from Captain Vickers’ calculation of his position. At about 2:30am, Sunday 6th September 1891 land was reported 4-5 miles off the port bow. The captain tried to put the ship on the other tack, but she would not respond. He then tried to turn her the other way but just as the manoeuvre was being completed the Fiji struck rock only 300 yards (274 metres) from shore. The place is known as Wreck Bay, Moonlight Head. Blue lights were burned and rockets fired whilst an effort was made to lower boats but all capsized or swamped and smashed to pieces. Two of the younger crewmen volunteered to swim for the shore, taking a line. One, a Russian named Daniel Carkland, drowned after he was swept away when the line broke. The other, 17 year old able seaman Julius Gebauhr, a German, reached shore safely on his second attempt but without the line, which he had cut lose with his sheath-knife when it become tangled in kelp. He rested on the beach a while then climbed the steep cliffs in search of help. At about 10am on the Sunday morning a party of land selectors - including F. J. Stansmore, Leslie Dickson (or Dixon) and Mott - found Gebauhr. They were near Ryans Den, on their travels on horseback from Princetown towards Moonlight Head, and about 5km from the wreck. Gebauhr was lying in the scrub in a poor state, bleeding and dressed only in singlet, socks and a belt with his sheath-knife, ready for all emergencies. At first they were concerned about his wild and shaggy looking state and what seemed to be gibberish speech, taking him to be an escaped lunatic. They were reassured after he threw his knife away and realised that he was speaking half-English, half-German. They gave him food and brandy and some clothing and were then able to gain information about the wreck. Some of the men took him to Rivernook, a nearby guest house owned by John Evans, where he was cared for. Stansmore and Dickson rode off to try and summon help. Others went down to the site of the wreck. Messages for rescuing the rest of the crew were sent both to Port Campbell for the rocket rescue crew and to Warrnambool for the lifeboat. The S.S. Casino sailed from Portland towards the scene. After travelling the 25 miles to the scene, half of the Port Campbell rocket crew and equipment arrived and set up the rocket tripod on the beach below the cliffs. By this time the crew of the Fiji had been clinging to the jib-boom for almost 15 hours, calling frantically for help. Mr Tregear from the Rocket Crew fired the line. The light line broke and the rocket was carried away. A second line was successfully fired across the ship and made fast. The anxious sailors then attempted to come ashore along the line but, with as many as five at a time, the line sagged considerably and some were washed off. Others, nearly exhausted, had to then make their way through masses of seaweed and were often smothered by waves. Only 14 of the 24 who had remained on the ship made it to shore. Many onlookers on the beach took it in turns to go into the surf and drag half-drowned seamen to safety. These rescuers included Bill (William James) Robe, Edwin Vinge, Hugh Cameron, Fenelon Mott, Arthur Wilkinson and Peter Carmody. (Peter Carmody was also involved in the rescue of men from the Newfield.) Arthur Wilkinson, a 29 year old land selector, swam out to the aid of one of the ship’s crewmen, a carpenter named John Plunken. Plunken was attempting to swim from the Fiji to the shore. Two or three times both men almost reached the shore but were washed back to the wreck. A line was thrown to them and they were both hauled aboard. It was thought that Wilkinson struck his head on the anchor before s they were brought up. He remained unconscious. The carpenter survived this ordeal but Wilkinson later died and his body was washed up the next day. It was 26 year old Bill Robe who hauled out the last man, the captain, who had become tangled in the kelp. The wreck of the Fiji was smashed apart within 20 minutes of the last man being brought ashore, and it settled in about 6m of water. Of the 26 men on the Fiji, 11 in total lost their lives. The remains of 7 bodies were washed onto the beach and their coffins were made from timbers from the wrecked Fiji. They were buried on the cliff top above the wreck. The survivors were warmed by fires on the beach then taken to Rivernook and cared for over the next few days. Funds were raised by local communities soon after the wreck in aid of the sufferers of the Fiji disaster. Captain Vickers was severely reprimanded for his mishandling of the ship. His Masters Certificate was suspended for 12 months. At the time there was also a great deal of public criticism at the slow and disorganised rescue attempt to save those on board. The important canvas ‘breech buoy’ or ‘bucket chair’ and the heavy line from the Rocket Rescue was in the half of the rocket outfit that didn’t make it in time for the rescue: they had been delayed at the Gellibrand River ferry. Communications to Warrnambool were down so the call for help didn’t get through on time and the two or three boats that had been notified of the wreck failed to reach it in time. Much looting occurred of the cargo that washed up on the shore, with nearly every visitor leaving the beach with bulky pockets. One looter was caught with a small load of red and white rubber balls, which were duly confiscated and he was ‘detained’ for 14 days. Essence of peppermint mysteriously turned up in many settlers homes. Sailcloth was salvaged and used for horse rugs and tent flies. Soon after the wreck “Fiji tobacco” was being advertised around Victoria. A Customs officer, trying to prevent some of the looting, was assaulted by looters and thrown over a steep cliff. He managed to cling to a bush lower down until rescued. In 1894 some coiled fencing wire was salvaged from the wreck. Hundreds of coils are still strewn over the site of the wreck, encrusted and solidified. The hull is broken but the vessel’s iron ribs can be seen along with some of the cargo of concrete and pig iron. Captain Vickers presented Bill Robe with his silver-cased pocket watch, the only possession that he still had, as a token for having saved his life and the lives of some of the crew. (The pocket watch came with 2 winding keys, one to wind it and one to change the hands.) Years later Bill passed the watch to his brother-in-law Gib (Gilbert) Hulands as payment of a debt and it has been passed down the family to Gilbert Hulands’ grandson, John Hulands. Seaman Julius Gebauhr later gave his knife, in its hand crafted leather sheath, to F. J. Stansmore for caring for him when he came ashore. The knife handle had a personal inscription on it. A marble headstone on the 200m high cliffs overlooking Wreck Beach, west of Moonlight Head, paying tribute to the men who lost their lives when Fiji ran aground. The scene of the wreck is marked by the anchor from the Fiji, erected by Warrnambool skin divers in 1967. Amongst the artefacts salvaged from the Fiji are china miniature animals, limbs from small china dolls, rubber balls, this glass bottle, sample of rope from the distress rocket and a candlestick holder. These items are now part of the Fiji collection at Flagstaff Hill Maritime Museum, along with Captain Vickers’ pocket watch and Julius Gebauhr’s sheath knife. The glass bottle is registered as “Artefact Reg No Fiji/1”. Flagstaff Hill’s Fiji collection is of historical significance at a State level because of its association with the wreck Fiji, which is on the Victorian Heritage Register VHR S259. It also represents aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The Fiji collection meets the following criteria for assessment: Criterion A: Importance to the course, or pattern, of Victoria’s cultural history. Criterion B: Possession of uncommon, rare or endangered aspects of Victoria’s cultural history Criterion C: Potential to yield information that will contribute to an understanding of Victoria’s cultural history. Clear glass oval medical bottle with rounded corners and flattened sides on front and back surfaces. Opening of bottle has a lip around it and could have been sealed with a stopper. There is a chip in the lip. One face of the bottle has a rectangular border with a name embossed vertically on it, “J. BOSISTO / RICHMOND”. The oval base of the bottle also has letters embossed on it “GE_ _AN” “B _ _ _ _ _”. There is also a large chip out of the base. The sides of the bottle have a vertical joining line. The bottle was recovered from the wreck of the Fiji.Flat side of bottle has rectangular border with “J BOSISTO / RICHMOND” embossed in the centre. The base of the bottle has “G E . . A N/B . . . . . .” embossed on it. Other letters have been removed with the chip. (probable wording was ‘GERMAN/BOTTLE)warrnambool, shipwrecked coast, flagstaff hill, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, shipwrecked artefact, fiji, 1891, glass bottle, medicine bottle, bosistos, j bosistos, german bottle

This handmade green glass bottle was made using the turn-moulded or rotated-moulded method, a variation of the mould-blown process. The bottle has the remnants of a cork seal in its mouth. It possibly contained ginger beer, soda or mineral water, flavoured drinks, liquor or wine. The bottle’s shine has been worn from around 3/4 of its body, indicating that it has been resting horizontally on an abrasive surface, perhaps in the ground or on a river or sea bed. TURN-MOULDED BOTTLE production method This bottle was handmade using the ‘turn-moulded’ process, one of a variety of mould-blown processes that followed the earlier mouth-blown method. The maker would add a portion of hot soft glass to the end of his blowpipe then blow air through the pipe while placing the end inside a bottle mould. The mould was then turned and twisted, giving the bottle a round, seamless body, and usually a round indented base. The cooled body of the bottle would then be finished with the addition of an applied top. A small amount of soft glass would be applied to the top of the bottle and a lip would be formed using a tooling implement. A concentric ring would also form below the lip, caused by the rotated lipping tool. The bases of bottles made with the turn-moulded method were generally not embossed but would commonly have a mamelon or ‘dot’ in the centre of the base. SEALING THE BOTTLE After filling this type of bottle with its contents it is then sealed with a straight, cylindrical cork with the aid of a hand operated tool called a bottle corker. The bottle corker compresses the cork as it is driven into the bottle. Once inside the bottle the cork expands evenly into the opening to tightly seal the contents – the denser the cork the better the seal. Brown, brown glass. Handmade turn-moulded bottle with seamless body and tooled lip. Deeply indented base has push-up mark with a ‘mamelon’ nipple-liker bump in the centre. Bottle is straight from base to half height then tapers to a shoulder over the next quarter, than almost straight up to the mouth. Produced in 1880s to 1910’s. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, brown glass bottle, handmade glass bottle, bottle with indented base, turn-moulded bottle, rotate-moulded bottle, tooled lip on bottle mouth, applied lip bottle, bottle corker, ginger beer bottle

This handmade green glass bottle was made using the turn-moulded or rotated-moulded method, a variation of the mould-blown process. The bottle has the remnants of a cork seal in its mouth. It possibly contained ginger beer, soda or mineral water, flavoured drinks, liquor or wine. TURN-MOULDED BOTTLE production method This bottle was handmade using the ‘turn-moulded’ process, one of a variety of mould-blown processes that followed the earlier mouth-blown method. The maker would add a portion of hot soft glass to the end of his blowpipe then blow air through the pipe while placing the end inside a bottle mould. The mould was then turned and twisted, giving the bottle a round, seamless body, and usually a round indented base. The cooled body of the bottle would then be finished with the addition of an applied top. A small amount of soft glass would be applied to the top of the bottle and a lip would be formed using a tooling implement. A concentric ring would also form below the lip, caused by the rotated lipping tool. The bases of bottles made with the turn-moulded method were generally not embossed but would commonly have a mamelon or ‘dot’ in the centre of the base. SEALING THE BOTTLE After filling this type of bottle with its contents it is then sealed with a straight, cylindrical cork with the aid of a hand operated tool called a bottle corker. The bottle corker compresses the cork as it is driven into the bottle. Once inside the bottle the cork expands evenly into the opening to tightly seal the contents – the denser the cork the better the seal. This turn-moulded glass bottle is made distinctive due to its round seamless body and indented base.Bottle, dark green glass. Handmade turn-moulded bottle with seamless body and tooled lip. Deeply indented base has push-up mark with a ‘mamelon’ bump in the centre. Bottle is straight from base to half height, then tapers to a shoulder over the next quarter, than almost straight up to the mouth. There is a portion of cork in the bottle’s mouth and dry remnants in the bottle’s base. Possibly used for ginger beer. Produced in 1880s to 1910’s. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, green glass bottle, handmade glass bottle, bottle with indented base, turn-moulded bottle, rotate-moulded bottle, tooled lip on bottle mouth, applied lip bottle, bottle corker

This handmade green glass bottle was made using the turn-moulded or rotated-moulded method, a variation of the mould-blown process. The bottle has the remnants of a cork seal in its mouth. It possibly contained ginger beer, soda or mineral water, flavoured drinks, liquor or wine. TURN-MOULDED BOTTLE production method This bottle was handmade using the ‘turn-moulded’ process, one of a variety of mould-blown processes that followed the earlier mouth-blown method. The maker would add a portion of hot soft glass to the end of his blowpipe then blow air through the pipe while placing the end inside a bottle mould. The mould was then turned and twisted, giving the bottle a round, seamless body, and usually a round indented base. The cooled body of the bottle would then be finished with the addition of an applied top. A small amount of soft glass would be applied to the top of the bottle and a lip would be formed using a tooling implement. A concentric ring would also form below the lip, caused by the rotated lipping tool. The bases of bottles made with the turn-moulded method were generally not embossed but would commonly have a mamelon or ‘dot’ in the centre of the base. SEALING THE BOTTLE After filling this type of bottle with its contents it is then sealed with a straight, cylindrical cork with the aid of a hand operated tool called a bottle corker. The bottle corker compresses the cork as it is driven into the bottle. Once inside the bottle the cork expands evenly into the opening to tightly seal the contents – the denser the cork the better the seal. This hand made, green glass bottle is representative of bottle making before mass production and is made distinctive due to its round seamless body and indented base.Bottle, dark green glass. Handmade turn-moulded bottle with seamless body and tooled lip. Deeply indented base has push-up mark with a ‘mamelon’ bump in the centre. Bottle is straight from base to half height, then tapers to a shoulder over the next quarter, than almost straight up to the mouth. There is a portion of cork in the bottle’s mouth and dry remnants in the bottle’s base. Possibly used for ginger beer. Produced in 1880s to 1910’s. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, green glass bottle, handmade glass bottle, bottle with indented base, turn-moulded bottle, rotate-moulded bottle, tooled lip on bottle mouth, applied lip bottle, bottle corker

This handmade green glass bottle was made using the turn-moulded or rotated-moulded method, a variation of the mould-blown process. The bottle has the remnants of a cork seal in its mouth. It possibly contained ginger beer, soda or mineral water, flavoured drinks, liquor or wine. The bottle’s shine has been worn from around 3/4 of its body, indicating that it has been resting horizontally on an abrasive surface, perhaps in the ground or on a river or sea bed. TURN-MOULDED BOTTLE production method This bottle was handmade using the ‘turn-moulded’ process, one of a variety of mould-blown processes that followed the earlier mouth-blown method. The maker would add a portion of hot soft glass to the end of his blowpipe then blow air through the pipe while placing the end inside a bottle mould. The mould was then turned and twisted, giving the bottle a round, seamless body, and usually a round indented base. The cooled body of the bottle would then be finished with the addition of an applied top. A small amount of soft glass would be applied to the top of the bottle and a lip would be formed using a tooling implement. A concentric ring would also form below the lip, caused by the rotated lipping tool. The bases of bottles made with the turn-moulded method were generally not embossed but would commonly have a mamelon or ‘dot’ in the centre of the base. SEALING THE BOTTLE After filling this type of bottle with its contents it is then sealed with a straight, cylindrical cork with the aid of a hand operated tool called a bottle corker. The bottle corker compresses the cork as it is driven into the bottle. Once inside the bottle the cork expands evenly into the opening to tightly seal the contents – the denser the cork the better the seal. This turn-moulded glass bottle is made distinctive due to its round seamless body and indented base.Bottle, dark green glass. Handmade turn-moulded bottle with seamless body and tooled lip. Deeply indented base has push-up mark with a ‘mamelon’ bump in the centre. Bottle is straight from base to half height, then tapers to a shoulder over the next quarter, than almost straight up to the mouth. The shine has been worn from three-quarters of the body of the bottle. There are particles adhered to the inside of the bottle. Possibly used for ginger beer. Produced in 1880s to 1910’s. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, green glass bottle, handmade glass bottle, bottle with indented base, turn-moulded bottle, rotate-moulded bottle, tooled lip on bottle mouth, applied lip bottle, bottle corker