2 x roller skates. Metal base (rusty) with leather straps to tie around shoes. Metal base can be adjusted (made shorter or longer by wing-nut underneath. Hard plastic wheels (4)children, toys, presents, roller skates, leisure

The history of metal packaging began in Bohemia in the 1200s. Metal has been produced for a very long time. But the first metal used for packaging was tin. In particular, it was the process of tin plating that was invented in Bohemia. Before this no other metal was economically able to be used for packaging. Later, in 1667 Andrew Yarranton, and English engineer, and Ambrose Crowley brought the method to England. Here it was improved by ironmasters including Philip Foley. Then by 1697, John Hanbury had a rolling mill at Pontypool in South Wales. The method they developed involved rolling iron plates using cylinders. This process enabled more uniform blank plates to be produced than was possible by just hammering the tin. https://www.shilohplastics.com.au/history-of-metal-packaging/ Fuller's Earth is any clay material that has the capability to bleach or dissolve oil or other liquids without the use of harsh chemical treatment. Modern uses of Fuller's Earth include as absorbents for oil, grease, and animal waste (cat litter) and as a carrier for pesticides and fertilisers. Minor uses include filtering, clarifying, and decolorising; active and inactive ingredient in beauty products; and as a filler in paint, plaster, adhesives, and pharmaceuticals. Fulling is an important step in the production of woollen garments, and can be traced back to ancient times. Cuneiform texts from Mesopotamia mention a raw material, which was delivered to fullers for the finishing of cloth. https://en.wikipedia.org/wiki/Fuller%27s_earth The use of tin to protect and store items, revolutionised the world. Fuller's Earth is a widely used product.Container of cylindrical sheet metal with perforated lid, used by Duerdin and Sainsbury Ltd, Sellers of Franbert's Fuller's Earth. Colour printed paper deteriorating. ‘Nett Contents 3½ oz.’ Ingredients still inside.Tin very rusty.'Franbert's Fuller's Earth. For the Toilet and Nursery. Protects the skin & Improves the Complexion. Nett Contents 3½ oz.'flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, tin, tin plating, containers

This saw could have been used in industry or in a home situation. It was made by the H. Disston & Sons of U.S.A. This company was established in 1850 by Henry Disston and by the 20th century it was the largest maker of hand saws in the world. The hand saws used today differ little from this early model. This saw is retained as a good example of a hand tool that is over 100 years old. This hand saw has a triangular-shaped metal blade with a serrated edge on the straight side of the blade The handle is wooden with five metal screws. There is a metal plaque containing the name and emblem of the manufacturer. The saw is a little rusty and stained.‘H. Disston & Sons Philada’ ‘T.E.G.’ household tools, history of warrnambool, wood saw

This item is one of several tools that are believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy. In 1865 Henry formed a partnership with Christopher Beattie and established the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute.This tool is retained as an example of a vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips.This is a chisel with a wooden handle that is in two segments and has a groove in the centre. The end of the handle has a cylindrical piece of tin attached. The chisel inserted into the handle is metal with a straight edge. The metal is a little rusty and there are traces of paint on the handle. vintage tools, henry phillips, warrnambool, history of warrnambool

Green and white speckled, enamelled metal candlestick holder. Rounded square base with a handle on one corner. In the middle of the base is the metal candle holder (same colour), also shaped rounded, square. Quite rusty on edges. candlestick holder, candles, light

A red coloured covr with black information. At the bottom of the booklet reads Guidance to Commonwealth Officers and Service ersonnel having household furniture and effects removed or stored at Commowealth expense. The booklet is held together by two rusty staplescommonwealth of australia, department of supply, stores and transport branch, furniture removal

The sample of steel from which the S.S. Julia Percy’s boiler was made has been tested, according to the attached label. The test involved heating the steel to blood red temperature (or dark red colour) then dipping it into water and bending it when it was cold. A “very severe test for quality” was written on the ticket by T.H. Osborne. (Mr Thomas Hamilton Osborne was the secretary for the Western Steam Navigation Co, established in Warrnambool in 1886. The company’s office was on the corner of Timor and Liebig Streets in Warrnambool and its north-western wall is now part of the current Warrnambool Regional Art Gallery. ) Cold bending of steel in a press or through rollers is the typical method of curving steel for construction. The steel needs to be manufactured in such a way that it is strong enough yet still flexible enough not to crack when bent or rolled. The boiler on the Julia Percy could have been a Scotch Boiler, a design introduced in the 1870’s and still being used today. This design was more robust that previous boilers, generating higher working steam pressures. The design incorporate greater ability to roll iron plates, leading to greater strength, thicker plating and fewer riveted joints. They were originally made of iron then later incorporated steel sections until they were entirely constructed of steel. Many examples of this type of boiler can be found on wreck sites. Shipping was the cheapest and most practical means of carrying produce and goods during the period 1840-1890. Regular domestic steamer services commenced in the Warrnambool district in the late 1850’s and by 1870 the passenger trade was booming. Produce was loaded from the jetty into ‘lighters’ (small boats), which took it to the ships at anchorage in the bay. Passengers were taken to the ship’s side then climbed aboard up ladders or gangways. The coming of the railway in October 1889 meant the gradual decline and end of the steam shipping era. Originally the ship was known as the SS Julia Percy and was later renamed as the Leeuwin. She was an iron passenger-cargo steam ship built in Glasgow by Thomas Wingate for the Warrnambool Steam Packet Company, which commissioned the ship for the steamship trade in Victoria’s western district. She was first registered in Warrnambool, Victoria in 1876. At one point in time the Julia Percy would sail from Warrnambool to Melbourne every Friday and return from Melbourne to Warrnambool every Tuesday. The cost of a return ticket for a Saloon Fare was £1.0.0. She would sail “if practical and weather permitting”. The Julia Percy changed hands several times. Her next owner was the Western Steam Navigaiton Co of Melbourne (1887). It was the manager of this company, Mr. T.H. Osborne, who tagged ths steel sample above. Melbourne Steamship Co became the next owners (1890), followed by William Howard Smith and Sons (1901) for use in Queensland coastal trades, then she was bought by George Turnbull in 1903 and used for local mail contract in Western Australia. She was sold to the Melbourne Steamship Company Ltd. (1906) and re-named the Leeuwi but continued in her Western Australian coastal run. She was converted into a coal hulk in Melbourne in 1910 as a result of damaged caused when she was driven against the jetty at Dongara during a gale. The ship was eventually dismantled and scuttled in Bass Strait on 28 December 1934. The steel sample is significant for its association with the wreck of the Leeuwin (Julia Percy), which is on the Victorian Heritage Register. It is historically significant for being a rare artefact that has potential to interpret aspects of western Victoria’s 19th century steamship trade and Victorian cultural history, including the testing and manufacturing process associated with steam power. Leeuwin is listed on the Victorian heritage Register as being historically significant ‘as one of only four wrecks of steamships in Victorian waters associated with the western district of Victoria’s coastal steamship trade. Her registered number is VHR S413. A sample of the steel from which the boiler of the "SS Julia Percy" (later named Leeuwin) was made. The piece of steel is a ‘C’ shape with the ends almost meeting. A luggage ticket is tied onto the steel and has an inscription on it. The steel is rusty.Ticket with typed information “Steel of which the Boiler of the “Julia Percy” (Warrnambool Steam Navigation Co) was made. TEST: Made Blood hot or Dark Red then dipped into water and bent cold. A very severe test for quality T.H. Osborne. Below these words is the hand written inscription in black “FM 151 / 9.75” julia percy, leeuwin, steel, boiler, steam ship, metal testing, western steam navigation co., flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, t.h. osborne

Box containing tin of Goanna Salve and information sheet. Box has one seal label intact. Box is damaged but text still legible. Tin is rusty and label is detached. Information sheet is torn and yellowed but still legible..(See packaging)pharmacy, j.c. marconi, goanna oil, ww1

Yields information about the development and Lake Wendouree from an aerial photograph c1940.Black and white photograph of an aerial view of the Lake Wendouree and the northern part of Ballarat c1940. Shows the photograph join lines, has names of suburbs, Railway lines. Purchased from rusty via Ebay 16/5/2019.trams, tramways, lake wendouree, ballarat, aerial views

Agray colour cover with red details. there are seven punch holes down the left hand side. Also there are two rusty staples down the left hand side. At the top of the booklet the name Sgt Hodder is written in black ink.australia - armed forces - service manuals, drill manual, infantry training, infantry platoon weapons, fieldcraft, sgt hodder

A khaki green coloured cardboard cover with black information on the front. Top right hand corner reads 7610-66-104-8356. Unde the Australian Army Insignai is the information of the booklet. The booklet is held toether by a rusty metal slide.australia - armed forces - service manuals, land warfare, ordnance training, field supply company

This candle mould was used in the past to make six candles. Molten wax or tallow, together with a central thread or cotton, were poured into the columns and when set were removed from the moulds. Until the advent of electricity in the 1920s in Warrnambool, candles, lanterns and lamps were an important source of lighting in homes. Few homes had gas lighting. Many householders made their own candles from waste fat etc. This mould is retained as an example of the way householders in the past made their own candles to assist lighting in the home. This is a mould with a rectangular base and six cylindrical hollow columns with pointed ends affixed to the mould base. The columns are topped by a rectangular metal tray with the openings of the columns in the base of the tray. There is a metal clip attached to one end of the tray. The mould is very rusty warrnambool history, candles

HMAS BENDIGO Sailor's Hat. White top, black rim, 3 names written inside crown, navy chin strap - 1 end stitched & 1 end pinned on with rusty safety pin. Name HMAS BENDIGO in gold lettering.“G V GRIFFITHS” “JAMES BURNS” “Coby Prigg”uniforms - navy, costume - male headwear

This dressmaker's model has been made by a New York firm (1971 model) and comes from the Fletcher Jones Factory in Warrnambool. It would have been used for making and displaying ladies' clothing made at the factory. David Fletcher Jones (1895-1977) served in World War One and in the 1920s set up as a travelling hawker selling drapery in Western Victoria. In 1924 he opened a men's wear shop in Warrnambool and manufactured in sute. In 1946 a Fletcher Jones shop opened in melbourne and in 1948 a factory was established in Warrnambool with a new company, Fletcher Jones and Staff begun in 1951. The company initially specialized in men's trousers but later expanded into both men's and women's clothing. It became an Australia-wide company known throughout the country until it ceased in 2011 and the Warrnambool factory buildings were sold.This dressmaker's model is of considerable interest as a memento of the Fletcher Jones and Staff Company, founded in Warrnambool, employing many local people for a great number of years and known throughout Australia for its quality products and pioneering business model as a founder and staff co-operative.This is a dressmaker's model with the body section (bust and torso) having a fabric cover over a wooden core. The top section is bronze-coloured with a silver rim. Beneath the body section is a wire frame and a metal base on castors. The castors are rusty and the fabric is broken in places. Collapsible model 1971 22 WOLF FORM Registered perfect model forms N Y 140 5th Avefletcher jones and staff, fletcher jones factory warrnambool, warrnambool history

Commercial tin openers first appeared in the mid 19th century and this model dates from the early 20th century. An improved version when a second serrated wheel was added came into operation about the mid 1920s. Tins (now cans) of food with sealed tops became popular in the 20th century and all households needed a tin opener. Today the can opener is still used but increasingly the can lids have an inbuilt clip that is pulled out to open the can. This tin opener has no known local provenance but it is retained as an early model of a tin opener from the past. It will be useful for display. This is a cast iron tin opener with a cutting blade attached to a piece of metal with a screw. The metal handle curves out from the metal piece holding the blade. The opener is a little rusty in parts. The name ‘Guard ’ is on both sides of the handle in raised metal letters.‘Guard’ household items, history of warrnambool

There was some gold mining in the Kiewa Valley and these buckets may have been used.Two small rusty looking steel buckets that are usually connected to a chain with many such buckets. They rotate to form a continuous chain scooping up loose rock and dumping it when mining. 20 cm x 12 cm x 9.5 cm deepgold mining

This chisel belonged to Ernest Brighton Phillips, a Warrnambool furniture maker. Ernest Phillips (1875-1924) was born in Warrnambool and was apprenticed as a cabinet maker at the Warrnambool Box Works. In the 1890s he established a furniture store at the corner of Liebig and Koroit Streets and by the 20th century he had the largest furniture warehouse and factory in Victoria outside Melbourne. His products were sold all over Australia. Ernest Phillips and his family lived at ‘Heatherlie’ in Koroit Street. Today this property is the site of the residential complex for senior citizens known as ‘Heatherlie’. This chisel is of interest as it belonged to Ernest Phillips, a prominent businessman in Warrnambool at the end of the 19th century and the beginning of the 20th century. The item is also of interest as it is a good example of a woodworking tool that was used 100 years ago. This is a chisel with a wooden handle and a metal blade flattened at the end and attached to the handle by a brass ring. The blade is rusty and the handle has some of the wood gouged out at the top end. The handle has splotches of paint on it. The name of the owner, E. Phillips, is stamped into the wood. ‘E. Phillips’ernest phillips, history of warrnambool, warrnambool

Commercial tin openers first appeared in the mid 19th century and this model dates from the early 20th century. An improved version when a second serrated wheel was added came into operation about the mid 1920s. Tins (now cans) of food with sealed tops became popular in the 20th century and all households needed a tin opener. Today the can opener is still used but increasingly the can lids have an inbuilt clip that is pulled out to open the can.This tin opener has been retained as an early model of a tin opener from the past. It was used locally in Wodonga and donated by a Wodonga resident. It is also in relatively good condition.This is a cast iron tin opener with a cutting blade attached to a piece of metal with a screw. The metal handle curves out from the metal piece holding the blade. The opener is a little rusty in parts. The name ‘Guard ’ is on both sides of the handle in raised metal letters. "GUARD" in raised letters on both sides of the handle.household items, cast iron appliances, can openers

A brown coloured cardboard cover with black information on the front. Top right hand corner reads 7610-66-019-4164. Under the Australian Coat of Arms are the details of the booklet. There are two rusty metal staples down the left hand side of the booklet.australian army, the enemy

A multicoloured green/cream plastic cover with black information. Top right hand side handwritten in black texta is 67/7/118. Under this reads 7610-66-023-5721. There are two rusty metal staples down the left hand side.australia - armed forces - service manuals, signals

Pressure Pump Blow Torch: Rusty metal including a cylinder with a pressure pump on the top of one side and an attached handle at the top with a barrel sticking out at a slope. The handle extends to the side of the cylinder where a metal handle is attached. Soldering iron with a wooden handle.metal work, soldering, blowtorch, handyman's equipment, higginson family

The firm of W.D. & H.O. Wills is a British firm which first began making tobacco and cigarettes in Australia in 1913. This tin is a reminder of the times when many people (especially men in rural areas) used to make their own cigarettes (‘rolling your own’). This tin is retained as an example of a tobacco tin in the times when smoking was more popular in society and when pipe smoking and ‘rolling your own’ cigarettes were more common.This is a round tin, originally painted brown, with a vacuum-sealing lid and a red and black painted label on the lid. The label has an image of a farm scene with a log cabin. The base of the tin has a ridge in the middle on to which the lid fits. The tin is empty and very rusty. ‘Log Cabin Fine Cut Tobacco’ ‘To open insert coin under lid and twist’ tobacco tin, log cabin tobacco tin, vintage tobacco tin

No. 1 Pipeline heads down the mountain from McKay Power Station (the Kiewa Hydro Electric Scheme) and can be seen from the Falls Creek Rd.. The pipeline is 1635m long. It was built on the mountain rather than as a tunnel inside the mountain - "It was argued that a pressure pipeline on the surface, while not actually cheaper than the tunnel could possibly save one year in construction time.'The document is a report on the welding involved on the No. 1 pipeline. J. M. Scott was the welding inspector for the SECV on the Kiewa Hydro Electric Scheme. The book is produced by the SECV and is the 'Foremen's Guide' and includes rules and regulations across all areas.A) 10 pages of a 'field record' all pages typed on one side. Stapled on top left corner B) Small, fat book c190 pages plus appendix. Thick and 'tattered looking'. Bound by flexible 'cloth?'(linen?) and fastened with 2 rusty fasteners.B) Cover - F/M J. Scott and red SEC stamp. Inside cover: "checked ... 22-8-55" and "checked 18-11-55"j.m. scott welding inspector, no 1 pipeline mckay power station, kiewa hydro electric scheme

A cream coloured booklet with black details on the front. There are two rusty metal staples left hand side. There a code of 7610-66-018-6712 at the top right hand side. Top right hand side written in ink reads Som 8 2australia - armed forces - service manuals, drill manual

A cream coloured manual which has lots of discolouration on the cover. the manual is held together by one rusty staple at the top left hand side. The name of Maj. Rees Jones - Mon. U. Coy is written in black in of the top right hand side of the manual.Maj. Rees Jones, Mon-u-Coyaustralia - armed forces - service manuals, training, maj rees jones

This tape measure was probably produced for, and used by, tradesmen such as carpenters and builders. In 1821 James Chesterman patented a tape measure that used a spring for rewinding the tape and the makers of large tape measures have used this method for nearly 200 years now. This item has no known local provenance but is retained as an interesting example of a common household and industrial item from the past but one which in an updated version is still in use today.This is a metal tape measure (in inches) enclosed in a circular-shaped leather covering. In the centre of the leather cover is a metal mechanism for rewinding the tape. The tape has a metal ring at its end. The leather is very rubbed and the tape is rusty. There is printing embossed on both sides of the leather cover. ‘Chesterman Ltd Sheffield England’ ‘66 ft’household items warrnambool

A cream coloured booklet with black details on the front. There are two rusty staples down the left hand side. At the top left there is a stamp saying 5 Field Ambulance, Carrington Road, RANDWICK. N.S.W. The is a code of 7610-66-018-6712 at the top right hand side.australia - armed forces - service manuals, 5 field ambulance, randwick nsw

From January 1959 and until 1982, “Cosmopolitan Motion Pictures”, owned by Mr Peter Yannoudes (Παναγιώτης Γιαννούδης) and Mr Stathis Raftopoulos (Στάθης Ραφτόπουλος) travelled around Australia to entertain the Greek, Turkish, Indian and Yugoslav speaking population of Australia and provide a significant cinema culture. They travelled as far as Perth in WA, Adelaide in SA, Tasmania, Darwin in Nt, Canberra in ACT and Sydney and NSW. However they found themselves also in places like Berri and Renmark in NSW, where concentrations of migrants lived and thrived during the period. Initially they were travelling by train, carrying all their equipment by hand and placing them in boxes and suitcases. However after 1962 when they acquired their first automobile, travelling became less of a burden, nevertheless cumbersome and laborious. They carried with them initially two portable projectors (second one as a backup) and at times travelled with a third in order to ensure that technology will not be letting them down at the time of film projection. At times the films were projected onto a white sheet of cloth because there was no proper screen to project it on at the venue they were using.Primary historic significance in the context that it was used, as well as rarity significanceMetal adjustable height, hand operated drill. Rusty appearance. It seems to have a small piece at the bottom broken off, but still in working order according to Mr P. Yiannoudes. This drill was used to drill holes in cinema light carbon sticks in order to extend their life.drill, carbon, film, entertainment, greek, language, hand, yiannoudes, γιαννούδης, τρυπάνι