Showing 202 items
matching blacksmith made
-
Mont De Lancey
Tool - Plough Spanner, Unknown
... spanner made by a blacksmith. It was used to tighten or loosen... handled double headed plough spanner made by a blacksmith ...It was made late 19th Century.A medium sized steel curved handled double headed plough spanner made by a blacksmith. It was used to tighten or loosen large nuts on a plough or other machinery. It was used in the late 19th century.spanners, wrenches, tools, farm equipment, steel -
Mont De Lancey
Tool - Fork Hoe, Unknown
... of the fork with a hole for the handle. It was made by a blacksmith... at the top of the fork with a hole for the handle. It was made ...Used in the 19th Century. A forged steel two pronged Forked Hoe head used to break up very hard or dry ground. There is a bend at the top of the fork with a hole for the handle. It was made by a blacksmith and used in the 19th century.agricultural tools, gardening tools, steel, pitchforks -
Mont De Lancey
Tool - Fork Hoe, Unknown
... A thick forged steel three pronged fork hoe head made... fork hoe head made by a blacksmith. There is a bent extension ...A thick forged steel three pronged fork hoe head made by a blacksmith. There is a bent extension piece at the fork head where a handle can be attached.agricultural tools, gardening tools, hoes, gardening forks, handtools -
Mont De Lancey
Tool - Fork Hoe, Unknown
... A thick forged steel three pronged fork hoe head made... fork hoe head made by a blacksmith. There is a hole at the fork ...A thick forged steel three pronged fork hoe head made by a blacksmith. There is a hole at the fork head where a handle can be attached.agricultural tools, gardening tools, hoes, gardening forks, handtools -
Mont De Lancey
Tool - Blacksmith Tongs, Unknown
A pair of small vintage handmade blacksmith tongs with two handles called reins, which are riveted together to form a hinge joint for the flat edged tongs. The blacksmith opens and closes the tongs using the handles. They are made of flat mild steel. They were used for holding steel in position and turning it over during forging operations.blacksmithing tools, forging tools, metalworking tools, furnace tongs, tools -
Mont De Lancey
Tool - Blacksmith Tongs, Unknown
A pair of long handled vintage handmade blacksmith tongs with two handles called reins, which are riveted together to form a hinge joint for the flat edged tongs. The blacksmith opens and closes the tongs using the handles. They are made of flat mild steel. They were used for holding steel in position and turning it over during forging operations.blacksmithing tools, forging tools, metalworking tools, furnace tongs, tools -
Mont De Lancey
Tool - Blacksmith Tongs, Unknown
A pair of vintage handmade blacksmith tongs with two handles called reins, which are riveted together to form a hinge joint for the long 90 degree right angled flat edged tongs. The blacksmith opens and closes the tongs using the handles. They are made of flat mild steel. They were used for holding steel in position and turning it over during forging operations.blacksmithing tools, forging tools, metalworking tools, furnace tools, tools -
Tarnagulla History Archive
Photograph of Treloar's Foundry and employees, Tarnagulla, Treloar's Foundry and employees, Tarnagulla, between 1855 and 1894
Murray Comrie Collection. Information collated by Murray Comrie: This photograph shows the Treloar Foundry with its chimney, employees and the Treloar home in Commercial Road Tarnagulla H.W. (Henry) Treloar was a native of Redruth in Cornwall, where he was born in 1811. He worked as a blacksmith in his father's Cornwall foundry and then in 1840 went to work in Cuba as a foreman smith to the Royal Santiago Copper Mining Co. Returning to England in 1851 he remained for two years just as the reports of rich Victorian goldfields began to be heard there. He brought his family to Australia in September 1853, arriving in Geelong and then working in Heidelberg for eighteen months. He returned to Geelong to set up a business but after three months was drawn to the Maryborough goldfields, then Dunolly and then Sandy Creek (as Tarnagulla was then known), arriving in March 1855. He remained in Tarnagulla until his death. He established the Foundry in Tarnagulla in 1855 and was known as the best 'mining' smith in the district. After the decline of mining he turned to production of agricultural implements and the firm built a reputation in the field, through devices such as the 'NONPARIEL' tree and stump extractor, double furrow ploughs, seed harrows and scarifiers. On 26th October 1878 the firm won three first prizes for their implements at the North Western Agricultural Show at Ingelwood. The business of Treloar & Son was taken over by the James Bros in November 1894. This photograph is a reasonable copy created from an older original, owned by Miss Doris Nicholls. Copy probably made by Murray Comrie in the 1970s. Monochrome photograph of five men and a young girl standing in front of a house with white verandah posts and two brick chimneys. In the background a much taller brick chimney is visible.tarnagulla, commerce, industry, blacksmithing, smithing, foundry, businesses, treloar, james, buildings, commercial road, main street -
Tarnagulla History Archive
Photograph of Treloar's Foundry employees demonstrating a stump extractor, Treloar's Foundry employees demonstrating a stump extractor, between 1855 and 1894
Murray Comrie Collection. This photograph shows the Treloar Foundry employees (possibly Henry Treloar with hand resting on the stump extractor) conducting a demonstration of their tree and stump extracting device on a farm in Inglewood while a large crowd watches. Information collated by Murray Comrie: H.W. (Henry) Treloar was a native of Redruth in Cornwall, where he was born in 1811. He worked as a blacksmith in his father's Cornwall foundry and then in 1840 went to work in Cuba as a foreman smith to the Royal Santiago Copper Mining Co. Returning to England in 1851 he remained for two years just as the reports of rich Victorian goldfields began to be heard there. He brought his family to Australia in September 1853, arriving in Geelong and then working in Heidelberg for eighteen months. He returned to Geelong to set up a business but after three months was drawn to the Maryborough goldfields, then Dunolly and then Sandy Creek (as Tarnagulla was then known), arriving in March 1855. He remained in Tarnagulla until his death. He established the Foundry in Tarnagulla in 1855 and was known as the best 'mining' smith in the district. After the decline of mining he turned to production of agricultural implements and the firm built a reputation in the field, through devices such as the 'NONPARIEL' tree and stump extractor, double furrow ploughs, seed harrows and scarifiers. On 26th October 1878 the firm won three first prizes for their implements at the North Western Agricultural Show at Inglewood. The business of Treloar & Son was taken over by the James Bros in November 1894. This photograph is a reasonable copy created from an older original, owned by Miss Doris Nicholls. Copy probably made by Murray Comrie in the 1970s. Monochrome photograph of a large crowd of people watching a stump-removal demonstration in a bush setting.tarnagulla, commerce, industry, blacksmithing, smithing, foundry, businesses, treloar, james, buildings, commercial road, main street -
Tarnagulla History Archive
Photograph of the north end of Commercial Road, Tarnagulla, North end of Commercial Road, Tarnagulla, c. 1909
Murray Comrie Collection. This photograph shows business on the north end of Commercial Road, Tarnagulla. From right: the brick Baptist Church (now private residence), Stafford's Blacksmith Coachbuilders and funeral/undertakers (since demolished), & Norwood's Tarnagulla Hotel. Information collated by Murray Comrie: Stafford's premises were built on land previously occupied by the stables of the George Hotel. The Stafford's building was later taken over and run by Frank McNamee. This photograph is a dark copy created from an older original. Copy probably made by Murray Comrie in the 1970s. Monochrome photograph depicting the north end of Commercial Road, Tarnagulla. A large wagon with team of horses is standing in the road. Three girls are walking down footpath at left side of image.Written on the original: 'Specially produced for Renshaw & Co' and 'Commercial Road (North End) Tarnagulla'. Written on this copy: 'Baptist Church Staffords Blacksmith Coachbuilders and funeral/undertakers, & Norwood's Tarnagulla Hotel'.tarnagulla, commerce, industry, blacksmithing, smithing, coachbuilding, businesses, stafford, norwood, mcnamee, buildings, hotels, churches, commercial road, main street -
Tarnagulla History Archive
Photograph of blacksmith's shop, Tarnagulla, Blacksmith's shop, Tarnagulla, c. 1960
Murray Comrie Collection. This photograph shows the blacksmiths premises on the north end of Commercial Road, Tarnagulla. Information collated by Murray Comrie: This building was demolished in the 1970s. The first use of the site was as the George Hotel licensed to an A.B. Clay in 1858, then Waller and Robinson. Charles Waller operated his Excelsior Line of coaches from the George Hotel stables. John Ousley took over the stables for use as a blacksmith's shop. He sold out to Stafford & Sons in 1908. Staffords found the existing premises at the George Hotel too small and built this building. Frank McNamee later took over the premises and operated it for many years. This photograph is a reasonable copy created from an older original. Copy probably made by Murray Comrie in the 1970s. Monochrome photograph depicting a large run-down weatherboard building at the north end of Commercial Road, Tarnagulla. Written in a sign on right side of building: 'Blacksmiths'.tarnagulla, commerce, industry, blacksmithing, smithing, coachbuilding, businesses, stafford & sons, norwood, mcnamee, buildings, hotels, horses, stables, commercial road, main street -
Whitehorse Historical Society Inc.
Clothing - Night Gown, circa 1900
Made by Mrs Norah Huggins 1891 - 1965 for her glory box. She was married to a blacksmith who worked with carriages. They lived at Ballarook near BallaratLong white cotton nightgown. Broderie Anglaise yoke with white lace trim on square neckline. Long sleeves trimmed with Broderie and lace. Centre closing has four buttonsN.Hugginscostume, female nightwear -
Whitehorse Historical Society Inc.
Clothing - Night Cap, circa 1900
Made by Mrs Nora Huggins (1891 - 1965) for her glory box. She was married to a blacksmith who worked with carriages. They lived at Ballarook, near BallaratWhite cotton night cap with broderie anglaise edgingcostume, female nightwear -
Whitehorse Historical Society Inc.
Tool - Vice, c1920
Blacksmith's vice called a leg vice. It rests on a solid block on the floor and secured on the bench with bolts. The vice was made of wrought iron with hardened steel jaws.rural industry, farm machinery, trades, blacksmithing -
Whitehorse Historical Society Inc.
Tool - Sledge Hammer, c1940
Made by a power hammer. Solid Steel.1791 12 lbs Brales Corural industry, farm machinery, trades, blacksmithing -
Whitehorse Historical Society Inc.
Tool - Anvil, c1920
See NA2323 for history of donor and photo.Anvil - made from forged steel and used by the blacksmith as a table to hand forge hot steel etc.rural industry, farm machinery, trades, blacksmithing -
Whitehorse Historical Society Inc.
Tool - Tongs, c1920
Made from hand forged steel, used for holding hot steel; whilst being forged.trades, blacksmithing, rural industry, farm machinery -
Whitehorse Historical Society Inc.
Tool - Tongs, c1920
Made from hand forged steel, used for holding hot steel whilst being forged.trades, blacksmithing, rural industry, farm machinery -
Whitehorse Historical Society Inc.
Tool - Tongs, c1920
Made from hand forged steel, used for holding hot steel whilst being forged.trades, blacksmithing, rural industry, farm machinery -
Whitehorse Historical Society Inc.
Tool - Tongs, c1920
Made from hand forged steel, used for holding hot steel whilst being forged.trades, blacksmithing, rural industry, farm machinery -
Whitehorse Historical Society Inc.
Tool - Tongs, c1920
Made from hand forged steel, used for holding hot steel whilst being forged.trades, blacksmithing, rural industry, farm machinery -
Flagstaff Hill Maritime Museum and Village
Functional object - Nail, circa 1840
This historic bronze nail dates back to 1840s when the ship Grange was built. Nails such as this one were used for boat building, as deck fasteners and many other uses. This nail was made at a time when the shanks of nails were usually machine cut but the heads were hand formed by blacksmiths. The nail was recovered from the shipwreck of the Grange in around 1968, 110 years after the Grange was wrecked (see below for further details on the Grange). It is part of the John Chance Collection. THE GRANGE, 1840-1858- The wooden barque ’Grange’ was a three-masted ship built in Scotland in 1840 for international and coastal trade. On March 22, 1858, the Grange set sail from Melbourne under Captain A. Alexander, carrying a cargo of ballast. The barque had left the Heads of Phillip Bay and was heading west along the Victorian coast towards Cape Otway. The ship struck Little Haley’s Reef at Apollo Bay due to a navigational error and was stuck on the rocks. The crew left the ship carrying whatever they could onto the beach. Eventually, the remains of the hull, sails and fittings were salvaged before the wreck of the Grange broke up about a month later. About 110 years later, in 1968, the wreck of the Grange was found by divers from the Underwater Explorers Club of Victoria. They were amazed to find a unique, six to nine pound carronade (type of small cannon) and a cannonball on the site. There have been no other similar carronades recorded. In that same year the anchor of the Grange was recovered by diver John Chance and Mal Brown.The nail is significant historically as an example of hardware used when building wooden ships in the early to mid-19th century. The nail is historically significant as an example of the work and trade of blacksmith. The nail also has significant as it was recovered by John Chance, a diver from the wreck of the Grange in the 1968. Items that come from several wrecks along Victoria's coast have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. The nail is historically significant for its association with the 1840s wooden barque, the Grange. The Grange is an historical example of a Scottish built vessel used for international and coastal trader of both cargo and passengers in the mid-19th century. The Grange is an example of an early ship, designed with a wooden hull. It is significant as a ship still available to divers along the south coast of Victoria, for research and education purposes. The Grange is an example of a mid-19th century vessel that carried a weapon of defence onboard.Nail, bronze, round head, four-sided shank, tip flattened to a rounded wedge shape. The surface is pitted and rough. There is orange and blue concretion on the shank. The nail is bent. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, west coast trader, apollo bay, mid-19th century shipwreck, the grange, scottish barque, little henty reef, captain a alexander, underwater explorers club of victoria, 1840s carronade, vhr 5297, coastal trader, wooden shipwreck, john chance, fastener, nail, square nail, machine cut mail, blacksmith, historic nail, bronze nail, carronade, mal brown -
Flagstaff Hill Maritime Museum and Village
Functional object - Nail, circa 1840
This historic bronze nail dates back to 1840s when the ship Grange was built. Nails such as this one were used for boat building, as deck fasteners and many other uses. This nail was made at a time when the shanks of nails were usually machine cut but the heads were hand formed by blacksmiths. The nail was recovered from the shipwreck of the Grange in around 1968, 110 years after the Grange was wrecked (see below for further details on the Grange). It is part of the John Chance Collection. THE GRANGE, 1840-1858- The wooden barque ’Grange’ was a three-masted ship built in Scotland in 1840 for international and coastal trade. On March 22, 1858, the Grange set sail from Melbourne under Captain A. Alexander, carrying a cargo of ballast. The barque had left the Heads of Phillip Bay and was heading west along the Victorian coast towards Cape Otway. The ship struck Little Haley’s Reef at Apollo Bay due to a navigational error and was stuck on the rocks. The crew left the ship carrying whatever they could onto the beach. Eventually, the remains of the hull, sails and fittings were salvaged before the wreck of the Grange broke up about a month later. About 110 years later, in 1968, the wreck of the Grange was found by divers from the Underwater Explorers Club of Victoria. They were amazed to find a unique, six to nine pound carronade (type of small cannon) and a cannonball on the site. There have been no other similar carronades recorded. In that same year the anchor of the Grange was recovered by diver John Chance and Mal Brown. The nail is significant historically as an example of hardware used when building wooden ships in the early to mid-19th century. The nail is historically significant as an example of the work and trade of blacksmith. The nail also has significant as it was recovered by John Chance, a diver from the wreck of the Grange in the 1968. Items that come from several wrecks along Victoria's coast have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. The nail is historically significant for its association with the 1840s wooden barque, the Grange. The Grange is an historical example of a Scottish built vessel used for international and coastal trader of both cargo and passengers in the mid-19th century. The Grange is an example of an early ship, designed with a wooden hull. It is significant as a ship still available to divers along the south coast of Victoria, for research and education purposes. The Grange is an example of a mid-19th century vessel that carried a weapon of defence onboard.Nail, bronze, oval head, four-sided shank, tip flattened to a rounded wedge shape. The surface is pitted and rough. There is orange and blue concretion on the shank. The nail is bent. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, west coast trader, apollo bay, mid-19th century shipwreck, the grange, scottish barque, little henty reef, captain a alexander, underwater explorers club of victoria, 1840s carronade, vhr 5297, coastal trader, wooden shipwreck, john chance, fastener, nail, square nail, machine cut mail, blacksmith, historic nail, bronze nail, carronade, mal brown -
Flagstaff Hill Maritime Museum and Village
Functional object - Nail, late 1700s to late 1800s
This historic bronze nail dates back to 1790ss to 1890s. Nails such as this one were used for ship building, as deck fasteners and many other uses. This nail was made at a time when the shanks of nails were usually machine cut but the heads were hand formed by blacksmiths. The nail was recovered from a shipwreck along the coast of Victoria in around 1968 and is part of the John Chance Collection. The nail is significant historically as an example of hardware used when building wooden ships in the early to mid-19th century. The nail is historically significant as an example of the work and trade of blacksmith. The nail is also significant as it was recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Nail; bronze, deck nail. Rounded rectangular head, rectangular shank cross-section, tip flattened to a rounded wedge shape but cut straight down at the end instead of a point. The surface is pitted and rough and has yellow and orange concretion and degradation on the nail's surface. Recovered from an unspecified shipwreck along the coast of Victoria. Part of the John Chance Collection. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, john chance, fastener, nail, square nail, machine cut mail, blacksmith, historic nail, bronze nail, hand forged, coastal shipwreck, victorian shipwreck -
Flagstaff Hill Maritime Museum and Village
Functional object - Nail, late 1700s to late 1800s
This historic bronze nail dates back to 1790s to 1890s. Nails such as this one were used for ship building, as deck fasteners and many other uses. This nail was made at a time when the shanks of nails were usually machine cut but the heads were hand formed by blacksmiths. The nail was recovered from a shipwreck along the coast of Victoria in around 1968 and is part of the John Chance Collection. The nail is significant historically as an example of hardware used when building wooden ships in the early to mid-19th century. The nail is historically significant as an example of the work and trade of blacksmith. The nail is also significant as it was recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Nail; bronze, deck nail. Rounded rectangular head, rectangular shank cross-section, tip flattened to a rounded wedge shape. The surface is pitted and rough and has blue-grey, green and orange concretion and degradation on the nail's surface. Recovered from an unspecified shipwreck along the coast of Victoria. Part of the John Chance Collection. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, john chance, fastener, nail, square nail, machine cut mail, blacksmith, historic nail, bronze nail, hand forged, coastal shipwreck, victorian shipwreck -
Tarnagulla History Archive
Photograph of blacksmith's shop, Tarnagulla, Blacksmith's shop, Tarnagulla, c. 1960
Murray Comrie Collection. This photograph shows the blacksmiths premises on the north end of Commercial Road, Tarnagulla. Information collated by Murray Comrie: This building was demolished in the 1970s. The first use of the site was as the George Hotel licensed to an A.B. Clay in 1858, then Waller and Robinson. Charles Waller operated his Excelsior Line of coaches from the George Hotel stables. John Ousley took over the stables for use as a blacksmith's shop. He sold out to Stafford & Sons in 1908. Staffords found the existing premises at the George Hotel too small and built this building. Frank McNamee later took over the premises and operated it for many years. This photograph is a reasonable copy created from an older original. Copy probably made by Murray Comrie in the 1970s. Monochrome photograph depicting a large run-down weatherboard building at the north end of Commercial Road, Tarnagulla. Written in a sign on right side of building: 'Blacksmiths'. Same as image THA-2019.0053tarnagulla, commerce, industry, blacksmithing, smithing, coachbuilding, businesses, stafford & sons, norwood, mcnamee, buildings, hotels, horses, stables, commercial road, main street -
Tarnagulla History Archive
Photographs: Buildings in Newbridge near Loddon River bridge, Buildings in Newbridge near Loddon River bridge, 1908 (original image)
Depicts at left, Petersen's bakery, a store shed, Simpson's storekeepers and Simpson's Hotel. Hollands blacksmith shop & wheelwrights on right opposite bakery. Murray Comrie Collection. Three copies of a monochrome photograph, image depicts buildings in the eastern approach to the Loddon River bridge at Newbridge This is a fairly dark copy of an older original. Copy probably made by Murray Comrie in the 1960s.newbridge, loddon river, bridge, shops, stores, businesses, hotels, simpsons, petersens, bakery -
Flagstaff Hill Maritime Museum and Village
Tool - Taps and Dies set, Wiley and Russell Mfg. Co, C. 1884
This set of taps and dies tools was owned by Frederick William McDowell (Fred) (1880 to 15-6-1967). He was a wheelwright by trade. He made and repaired vehicles such gigs, buggies, jinkers, sulkeys, spring carts and farm wagons. His workshop was on the corner of Cramer Street and Raglan Parade in Warrnambool., previously the site of Fotheringhams, and after McDowell's, and still in 2023, occupied by Reece Plumbing Fred's workplace prior to retiring was at Bryant & Waterson's in Kepler Street, opposite the Criterian Hotel, making rubber tyred horse-driven farm wagons. This Wiley and Russell hand operated, thread cutting Die and Stock, or Die and Tap, set’s patent carries the description “The taper-headed screws adjust the size; the four side screws hold the cutters firmly in the holder. Marketed as the Wiley & Russell LIGHTNING SCREW PLATE. The taper-headed screws are carried over from the J.J. Grant October 21, 1871 patent (no. 120,266). This patent was improved by Smart's Oct. 21, 1884 patent (no. 306,783).” Dies are used to cut external screw thread, stocks are the tools that hold the dies in place with countersunk adjustable screws, and taps are the tools that make the internal threads. The tools would be used by farriers, blacksmiths, wheelwrights sailing and steam ship engineers for making new, or repairing old, threads in metal. WILEY AND RUSSELL Manufacturing Company The company Wiley and Russell was established in 1872 by Solon Wiley and Charles P Russell, whose uncle founded the J. Russell Cutlery Co. The company began with the purpose of manufacturing thread cutting tools in Green River U.S. This tap and die set is an example of tools used by blacksmiths, farriers, wheelwrights and engineers on sailing and steam ships. It is also an example of early U.S. made engineering tools.Tap, Die, Die Stock set of industrial tools, fitted inside original timber box with three instruction labels attached inside lid. The set is the “Wiley and Russell LIGHTNING SCREW PLATE Pat. Aug. 5, 1884”. The lid has three metal hinges and is secured by two metal hook and eye fittings. This set of Whitworth standard threads has metal die and stocks (seven), and taps (three - the case has provision for four more die). The manufacturer’s details and the sizes of the threads are impressed into the tools. The paper labels have instructions and a diagram for the use and care of the tools. Tools have a protective oil coating. Made by Wiley and Russell Manufacturing Co. of Greenfield, Massachusetts, U.S., c. 1884; the tools were patented in August 1884, U.S. Patent 303,060. “Wiley & Russell MFG.CO, Greenfield, Mass, Pat Aug 5 1884.” “WHIT. STD.”flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, tap and die set, 1884 engineering tools, wiley and russell mfg co, lightning tap and die set, tap, die and stock set, screw thread cutting tools, taps and dies, stocks and dies, lightning screw plate, cutters, j.j. grant, patent no. 120266, solon wiley and charles p russell, wiley and russell, j. russell cutlery co, green river u.s, whitworth thread, fred mcdowell, frederick mcdowell, wheelwright, gig, buggy, jinker, sulkey, spring cart, farm wagon, 2-wheeled cart, horse cart, horse cart parts, jinker buggy, transport, vehicle, horse drawn, horse jinker, bryant & waterson -
Kiewa Valley Historical Society
Blacksmith's Bellows
... their blacksmith forge. They made their own tools, were able to mend ...In the Middle Ages double-acting bellows was introduced. It had 2 parts, one operated by hand or foot, the other took air from it and was weighted so it forced air out while the part was filling. Blacksmithing is the shaping of hot iron and steel, usually by hammering. Very hot fires were produced by 1.a hot air blast. 2. burning charcoal (not wood). Bellows were used to make tools, fix equipment including machinery, drays, carriages, harnesses etc. Farmers in the Kiewa Valley often had their blacksmith forge. They made their own tools, were able to mend equipment, drays etc., gates, and most items that were made of iron and steel.Large Double Acting bellow with wooden top and bottom, shaped like a 'water drop' - narrow at one end and broad at the other. The wood is held by strips of wood and leather bound and placed around the perimeter. The wood on the top side has inscriptions (illegible). The wood on the bottom side has a rectangular hole. The narrow end feeds into a pipe to enable the fire to receive a hot blast of air. When the bellow is squeezed it allows both pieces of wood to be pushed together.Illegibleblackmiths, bellows, double acting bellow -
National Wool Museum
Quilt, 1880s
The wagga was owned by the great uncle of the donor's husband, George Stephens. Mr Stephens was a mining engineer in the late 1800s to early 1900s in Stawell, Main Lead (near Beaufort), Diamond Creek and Costerfield in Victoria. His last residence was at Bosterfield, where the wagga was used as a bed quilt in the mid 1940s. It may have also been used in the childhood home of Mr Stephens at Stawell. Mr Stephens saved the life of a blacksmith at Diamond Creek Gold Mine circa 1910.A wagga made from men's suits and coats, unpicked and sewn together. Pieces are in blue, brown checked and striped materials. There are remnants of a backing around the edges.wagga, running stitch collection, diamond creek, victoria, stawell, beaufort, costerfield