Black and white image of workmen at electro hydraulic dredge Snake Valley mine site. Image has been mounted on dark brown card. Electro hydraulic dredge Snake Valley Victoria 1909. J.M.C. Bennett was an engineer back at the main base, at Dawson's Dam on the Carngham Road, bet Linton and Snake Valley. These dredges were used for getting gold. The streams of water under high pressure just washed the hills and ground away. This dredge closed down early 1910. 200 H.P. Motors were used and 10 in. pumps.electro hydraulic dredge, dredging, sluicing, mining, gold, miners, mining equipment, snake valley

With the advent of audio content available through i-phones and other small devices, the demand for a dedicated audio, easily portable player for the blind and vision impaired became louder and louder. Two organisations competed to deliver this and Canadian company Humanware developed the Victor Stream. A portable hand-held device that could deliver audio content from SD card and was small enough to fit into a pocket or handbag. It could read a variety of formats, such as DAISY, MP3 and txt files, and had a built in voice recorder via the inbuilt microphone or an external one. As part of the trial to introduce new deliver mechanisms for audio content, the Stream was in demand as books could be downloaded directly to it and were aimed at those who were comfortable using the technology with minimal support.Black and silver rectangle with silver buttonsaudio equipment, assistive devices

Designed to create an impression on paper, the stylus allows users to create Braille through the applied use of pressure that creates a depression on one size of the paper and a raised dot on the alternative side. However sometimes mistakes were made and rather than re-emboss the whole page, a Braille eraser was sometimes used by flattening out indentation on card, one dot at a time.1 wooden piece with blunted tipbraille equipment, association for the blind

Organisation-Club/society-sport3767.4a: A receipt of purchase from Henry Jackson, General ironmonger and Iron merchant, by Mr F.D. Jones (labelled as secretary on the receipt/treasure in other documents) on behalf of the Devils Own Cricket club. The receipt is a professionally made, printed template printed on blue/purple coloured limed paper with red margins. The transactions made by Mr Jones are handwritten in cursive font with black ink. The receipt indicates that payment was made to Mr Jackson on the 10th and 25th of March 1875. the pound was used as currency. 3767.4b: This receipt is dated March 25th 1875. Detailing the repair of a cricket ball. W.B. Fox, a saddler and harness marker, executed the repairs. The receipt is a professionally made, printed template in black ink on a light blue sheet of lined paper with red margins. The purchase order and payment remarks are handwritten in cursive with black ink. Pounds were used a currency. 3767.4c: This receipt is entirely handwritten in cursive with black ink on a torn rectangular piece of blue coloured paper. There is no official printing or branding on the receipt. The receipt details the purchase of a cricket ball by the Treasurer of the DOCC in March 1875 from F. Macoboy. The page has a large red stain/smudge in the top right-hand corner. 3767.4d: This professionally printed receipt is printed in black ink on a rectangular piece of white/cream coloured paper. The official branding is that of W. Welch, a general printer, binder etc. from Sandhurst. The record of the purchase of a 150-page record book for the DOCC by Mr. Jones is handwritten in cursive with black ink. The receipt is dated 8th March 1875 and payment was made on 9th March 1875. 3767.4e: This reciept is a handwritten note in black ink on a blue piece of lined paper no larger than a business card. The note, dated 1st March 1875, is addressed to Mr. F Jones, Hon Treasurer Devils Own C.C. The note is written by R.W. Franklyn in reference to 3767.4c and reads as follows: "Please pay M'acoboy 5/- price of ball" 3767.4f: This receipt in professionally printed in black ink on a blue coloured, lined paper. The branding refers to Henry Jackson, as per 3767.4a, and details the purchase of cricket equipment by the Law C.C. The receipt is dated February 19, 1875.docc, devils own cricket club, sandhurst, w. welch, w.b. fox, henry jackson, f. m'acoboy, law cricket club, financials, f.d. jones

Black and white photograph mounted on brown board. Ten males in front of mine shaft. One male in divers suit. Male second from L holding small dog. Cage and poppet legs in background. Mullock heap at back. Inscriptions: Hand written on BR corner of photo 'Percival Pinder, Photo, Bendigo' Hand written on board under photo 'Tambour Major GM Coy 846 ft'. On separate card glued to bottom of mount board, printed 'Diver inspecting flooded Tambour Major Mine at Specimen Hill in 1920'. Hand written in ball point pen on back 'Tambour Major' Mine Group photo taken at Tambour Major about 1920. Dad on extreme right, Joe Sheard, Mine Manager in diving suit. A Richardson, 29 Harrison Street' Hand printed in black ink on back 'Diver inspecting flooded Tambour Major Mine in 1920'. On back - circular purple stamp 'Royal Historical Society of Victoria, Bendigo Branch'.Percival Pinder, Bendigomining, surface equipment, tambour major mine, bendigo, mines and mining, miners, mine, specimen hill, flooded mine, diver

Black and White photograph, mounted onto grey impressed and lined card of 8 men in a doorway a the Essendon or Ascot Vale Power House operated by The North Melbourne and Electric Tramways and Lighting Company. NMETL Has the power station equipment in the background. Photo by "Darge" Photos, 175 Collins St Melbourne, printed on the bottom right hand corner. Mr Murdoch the manager, most likely in the right hand of the top row. Others unknown. May have been taken a the time of the hand over of Essendon Power Station to the SEC / MMTBOne person has been arrowed the expression "ME" written onto the photograph.trams, tramways, power station, personnel, equipment, essendon, nmetl, substation

Black and White photograph, mounted onto dark grey card of 4 men in standing by a generator at the Essendon or Ascot Vale Power House operated by The North Melbourne and Electric Tramways and Lighting Company. NMETL Has the power station equipment in the background. Photo by "Darge" Photos, 175 Collins St Melbourne with the name impressed into the bottom right hand corner.One person has been arrowed the expression "ME" written onto the photograph.trams, tramways, power station, personnel, equipment, essendon, nmetl

Comb bound (white plastic) specification or tender document, approx. 70 pages, with glossy card covers, titled "Tender Schedule for All-Electric Trams" and "Contract 2500", published by the Melbourne and Metropolitan Tramways Board, closing Monday 2 October 1972. Details the conditions of tender, conditions of contract, notes, specification, gives background information about Melbourne, dimensions, performance, drivers and conductors, trucks, wheels, brakes, electrical equipment, control panels and drawings. The drawings give a map of the system, typical city route, Glenferrie Road route (grade diagram), concrete track construction, min. radius curves, loading gauge, all-electric tram and mounting details for the trolley base, schedule of prices, tender form, form of contract, schedule of information to be provided by the tenderer. On the inside of the cover is a memo from D. Snell, Deputy Chairman to the Testing Engineer, dated 11/7/1972 about the tender being issued, but requesting least publicity and all enquiries to Mr. Snell. Part of the work to tender for the construction of Z class trams. Document scanned to pdf file word searchable. See Item 4388 for the Z3 document and 1583 for an August 1966 version and Reg item 4667 for a draft June 1965 version. 2nd copy added 7/8/2020 from Keith Kings papers.In in pencil in the top right hand corner of cover "1975" crossed out and "1972" written in. On first sheet in pencil, "Howard Smith" and "Laboratory 10 Feb 1975" stamped on.trams, tramways, specification, tenders, z class, mmtb, melbourne

Report - typed carbon copy - about 60 foolscap sheets bound with black and white photographs of the testing equipment within a brown card folder, secured with fold back clips, with red adhesive tape binding on the outside. Titled "Noise Test - Tramcars and Tracks", dated 12/8/1957, prepared by the MMTB Testing Department, Report No. N1/1/88. Gives details of the testing methodology, where testing carried out, types of track construction and the results - concrete track noisier than sleeper construction - includes notes on "quiet" trams.trams, tramways, preston workshops, reports, specification, wheels, tramcars, track, noise

Comb bound (white plastic) specification or tender document, approx. 70 pages, with glossy card covers, titled "Tender Schedule for All-Electric Trams", published by the Melbourne and Metropolitan Tramways Board, closing 12 September 1966. Details the conditions of tender, conditions of contract, notes, specification, gives background information about Melbourne, dimensions, performance, drivers and conductors, trucks, wheels, brakes, electrical equipment, control panels and drawings. The drawings give a map of the system, typical city route, Glenferrie Road route (grade diagram), concrete track construction, min. radius curves, loading gauge, all-electric tram and mounting details for the trolley base, schedule of prices, tender form, form of contract, schedule of information to be provided by the tenderer. Second copy from same donor added 9-3-2017 See Reg Item 2266 for the 1972 version and 4667 for a draft version - dated June 1965. See Item 4388 for the Z3 document. See Reg Item 4049 for associated newspaper cuttings.In red felt pen on top right hand corner "(1966)". Has stamp "Discarded from PTC Library 22 Oct. 1989" on front cover. 2nd copy has "1966" in ink in top right hand corner.trams, tramways, specification, tenders, z class, mmtb, melbourne

Report - 149 A4 pages, brown comb bound, orange card covers with two pasted on labels on the front cover. Titled "Chopper Control for Trams". Funded by the Australian Government Transport (Planning and Research) Act 1974, prepared by the MMTB Engineering Department Technical Services Department. Gives an introduction to chopper control technology, summary of the findings of the study, 25% saving in energy. Has a table of contents on page 8, many graphs, including impact of regeneration on W class tram, electromagnetic impact and many photographs of the test equipment. Includes the test program.Front and back covers stamped "Tramway Workshop Library Preston", and in top right hand corner in ink "(Z Tram #5) (1977) " and in pencil "Spare Copy"trams, tramways, mmtb, reports, testing, preston workshops, chopper control, controllers, z class, tram 5

Report - approximately 350 pages, with heavy card covers, leather corners and centre and spine titled with letters in gold block "Australian and New Zealand Tramways / Fourth Conference Sydney March 1934" and name "H. Stephenson" on front bottom edge. Perfect bound with glued end covers. Details the proceedings of the conference held from 19th to 23rd March 1934, attendees, papers, appendices. Covers all engineering, operations and technical aspects of Australian and NZ tramways. Attending were representatives from Adelaide, Auckland, Brisbane, Dunedin, Hobart, Melbourne and Sydney. Detailed table of contents, program and attendees.trams, tramways, conferences, sydney, tramways, equipment, rails, mmtb

Provides a detailed list, not fully comprehensive, of purchase contracts for the MMTB between 1919 and 1969. Lists Buildings Cable wire ropes Cable grip dies General - punch card systems, advertising on trams Miscellaneous Vehicles Motor buses and Garage equipment Permanent Way Equipment Poles - steel and wooden Rail bonds Special trackwork Substation Equipment Traffic - ticket issuing machines and radio equipment Trams and bodies Tram equipment Tram rails Trolley Wire Workshops EquipmentYields information about MMTB Purchases between 1919 and 1969 - not complete.Document - 50 Foolscap sheets - photocopied.mmtb, tramways, contracts, purchases, workshops, trams, buses, trackwork, buildings, depots

Set of two form/s or tags or dockets, form number 3/586, used to tag equipment from a tram depot to Preston workshops. A similar document would have been used for the return - most likely by the Freight Tram. Preprinted on light card with a two reinforcing pieces around the top hole with the printers details on the piece - Victa Tag. .1 - 12/5/1964 - from Camberwell to Preston Stores - 9 x ? aluminium - return to stock. .2 - 17/3/1954? - from Hawthorn Depot to Preston Workshops - 1 motorman's seat for repair.trams, tramways, preston workshops, forms, camberwell depot, stores department, hawthorn depot, equipment

Specification or Tender Document - titled "Design, Manufacture and delivery of 100 only all-electric trams", and "Background Information and Preliminary Specification", dated June 1965. Bound into a brown foolscap card cover. Details the conditions of tender, conditions of contract, notes, specification, gives background information about Melbourne, dimensions, performance, drivers and conductors, trucks, wheels, brakes, electrical equipment, control panels and drawings. The drawings give a map of the system, typical city route, Glenferrie Road route (grade diagram), concrete track construction, min. radius curves, loading gauge, all-electric tram and mounting details for the trolley base, schedule of prices, tender form, form of contract, schedule of information to be provided by the tenderer. Comprises: 1 - Conditions of Tendering - 1 page 2 - Conditions of Contract - 4 pages 3 - Contents - 3 pages 4 - Notes for prospective tenderers - dated June 1965 5 - General nature of contract - 21 pages 6 - Appendix A - climate data - two sheets 7 - List of 14 appended drawings 8 - O.6887A - cross section of trolley wire 9 - P.13855 - Glenferrie Road, Longitudinal Section 10 - P.13856 - Wattle Park Route 11 - P.13857 - East Preston Route 12 - P13858 - Concrete track construction 13 - P13859 - Open track construction 14 - P.13860 - Paved ballast track construction 15 - P.13887 - Tram Route - locations of substations and section switches 16 - P.13888 - Minimum radius service curves to give minimum clearance between tramcars 17 - P.13889 - Grooved Rail - 102 pounds per yard and tire profile 18 - R10-301 - Loading gauge, proposed electric tramcars 19 - R9706K - Rolling stock data, tramcars 20 - R10306 - Collins Points Shifter - Wiring diagram. 21 - Schedule of data to be supplied by the tenderer 22 - notes on Automatic Points shifters - 2 sheets 23 - Tender prices and delivery periods - 2 sheets. See Reg Item 2266 for the 1972 version and 1583 for the August 1966 version. See Reg Item 4049 for associated newspaper cuttings. See file htd4667i1.pdf for scans of the drawings.In ink in top right hand corner - "Lees"trams, tramways, specification, tenders, z class, mmtb, melbourne

Set of two form/s or tags or dockets, most likely used to tag equipment, possibly a motor or bearing at a tram depot or Preston workshops. Handwritten on light card with a two reinforcing pieces around the top hole with the printers details on the piece. .1 - 22/9/71 - 756 28T .2 - 26/1/72 - 381 MV.101AXtrams, tramways, preston workshops, forms, stores department, equipment, motors, bearings

Instruction - 64 pages + light brown card cover centre stapled with cloth binding on outer edge + fold out drawing inside the rear cover, titled "Westinghouse - T5001-1 SM3 Straight-Air Brake Equipment". Dated March 1927. Has a table of contents, outlines the rules of operating brake equipment fitted to tramcars, the SM3 and PV brake valves, SX2 brake valve, locomotive straight air, installation piping, wiring, maintenance - piston travel, lubrication, car tests, hints to Motormen and Conductors and General Hints. Includes instructions on compressors, air intakes, valves, cylinders and governors.On inside cover "Bob Prentice 13 High Street Prahran Vic 3181" and on top of first page "W. Armstrong"trams, tramways, electrical engineering, electrical equipment, westinghouse, air compressors, brakes, instructions, maintenance

Instruction - 92 pages + light brown card cover centre stapled with cloth binding on outer edge, titled "Westinghouse - T5002 - Motor Driven Air Compressors for Electric Railway Service". Dated January 1938". Has a table of contents, giving details for motor driven compressors, DH, D-EG, D-F, D-K, D-4-P, XQ-27, C. air strainers and installation. Includes instructions on compressors, air intakes, inspection and maintenance and disorders - causes and remedies.On inside cover "Bob Prentice 13 High Street Prahran Vic 3181" and on top of first page "W. Armstrong"trams, tramways, electrical engineering, electrical equipment, westinghouse, air compressors, instructions, maintenance

Book - six sections, 134 pages + end pages + heavy card covered with a red stippled paper titled "The Electric Tramcar Handbook", 7th Edition, written by W. A. Agnew, published by H. Alabaster, Gatehouse & Co. Ludgate Hill in 1915. Right hand of sheets rounded. Has a table of contents and index at the rear. Written for Motormen, Inspectors and depot workers. Covers many aspects of the electric circuits for trams, including controller diagrams, tramways, tramcars, controllers, overhead, brakes, on the road and faults and Breakdowns. Would have been a reference guide for training staff. Scanned in three pdf files.trams, tramways, electrical engineering, electrical equipment, air compressors, brakes, instructions, maintenance, tramcars, training, controllers, overhead

Instruction - 108 pages + 9 fold out drawings glued and stapled in at the rear + card covers with red cloth binding, rounded right hand edges, centre stapled. Titled "Instruction Pamphlet S-100, Air Brake and Safety Car Control Equipment", published July 1924 by the Safety Car Devices Co. St Louis. Includes the M28 Brake valve. Describes in detail the rules for operation, parts, description, M28 Brake Valves, Maintenance, Practical car tests, hints, defects. The 9 drawings at the rear of the document give detail arrangements of the piping and control equipment. Book scanned into three sections. See also Reg Item 3513 for another similar document.on top of first page "C. Hodgson"trams, tramways, electrical engineering, electrical equipment, air compressors, brakes, instructions, maintenance, controllers

Instruction - 48 pages + light brown card cover centre stapled with cloth binding on outer edge + 13 fold out drawings inside the rear cover, titled "Westinghouse - T5001-1 Straight-Air Brake Equipment". Dated March 1923. Has a table of contents, outlines the rules of operating brake equipment fitted to tramcars, the SM3, SX2 brake valve, locomotive straight air, installation piping, wiring, maintenance - piston travel, lubrication, car tests, hints to Motormen and Conductors and General Hints. Schedule for SM-1 and featherweight equipment. Includes instructions on compressors, air intakes, valves, cylinders and governors.On front cover in ink "Mr McLaren"trams, tramways, electrical engineering, electrical equipment, westinghouse, air compressors, brakes, instructions, maintenance

Book - 170 pages, 10 sections sewn and bound into heavy green card covers cloth covered with glued end pages. Title "Miscellaneous Tests on Car Equipment" for electric street car or trams written by Eugene C Parham and John C Shedd, published by McGraw Hill Book Co. of New York, dated 1910. Has a table of contents, index at the rear, and index of Rules for determining sizes of electrical equipment and tramcar horsepower and kilowatts, traction and speeds. Cover sheets, table of contents and indexes scanned to a pdf file.In a number of places "The Electric Supply Company of Victoria Limited" stamped throughout the book.trams, tramways, electrical engineering, electrical equipment, tramcars, maintenance, motors

Comb bound (white plastic) specification or tender document, approx. 180 pages, with glossy card orange covers, titled "Tender Schedule for Electric Trams" and "Contract 3000". Compiled and published by the Melbourne and Metropolitan Tramways Board, closing Monday 10 May 1977. Details the conditions of tender, conditions of contract, notes, specification, gives background information about Melbourne, dimensions, performance, drivers and conductors, trucks, wheels, brakes, electrical equipment, control panels and drawings. The drawings give a map of the system, typical city route, Glenferrie Road route (grade diagram), concrete track construction, min. radius curves, loading gauge, all-electric tram and mounting details for the trolley base, schedule of prices, tender form, form of contract, schedule of information to be provided by the tenderer. Includes an Alphabetical Index. Includes a drawing for a single ended version of the tramcar. Became the Z3 class. Only the table of contents and the drawings scanned. See Reg Items 1583 and 2266 for other similar documents. See Reg Items 337 and 338 for a report on the operation of single ended tramcars 2 copies held.Has in ink written on front cover "J Armstrong" with a stamp blacked out and other copy of the same signature.trams, tramways, z3 class, specification, tenders, mmtb, melbourne, single ended tramcars

Set of 7 manuals, documents, instructions regarding truck, bus, motors produced by Volvo. .1 - Volvo Truck facts – 88-89 - approx. 70 pages with diagrams, card covers. .2 - Volvo bus data sheet set - 9 foolscap sheets with data on chassis, servicing and general specifications. .3 - Lubrication recommendations for Volvo buses – post 1950 - Foolscap - approx. 40 sheets. .4 - Volvo Service bulletin – service intervals for oil and filter - single A4 sheet. .5 - Volvo service bulletin – Lubricating oil and recommendations - single foolscap sheet, .6 - Volvo turbo diesel and its Bosch injection system - manila folder containing about a 30 pages document titled "The Volvo TD100A Engine". .7 - Letter to MMTB 1977 re oils from Volvo Australia - correspondence - 10 sheets - dated 3/6/1977, with a note saying it does not answer the question.trams, tramways, volvo, buses, instructions, manual, equipment, maintenance

Pamphlet or Catalogue - 16 A4 pages + card cover - full colour centre stapled titled "Austbreck" providing a detail over view of the company, its products and locations. c2000 Company provides pantographs, overhead traction systems for rail and tram, crane trolley systems, design and project management. Includes brush holders, isolation systems and insulation.trams, tramways, overhead, electrical engineering, trolley wire, pantographs, electrical equipment

Document produced by the Transit Research Corporation of New York, details the specifications for the Presidents Conference Committee (PCC) for a streetcar or tram for American cities. The MMTB researched this type of tramcar for use in Melbourne, taking out a licence for their production. This document dated 1/4/1947 with revision to 1/6/1950 would have been part of the licence agreement. Unfortunately, there were insufficient funds to build this type of tramcar. Only tram 980 which was based on a modified W6 class body was fitted with PCC equipment, later transferred to prototype PCC tram 101. See reference.Yields information about the technical specification for US PCC tramcars.Document - bound with card covers, approx 300 printed pages including folded drawings held by an Arnos type steel binding clip,On the spine with a green/white label "Specifications for PCC Car"tramways, tramcars, pcc, new trams, tramcar specifications

Document - full title "Met Tram Overhead appreciation for Met Tram Officers & Tram Drivers" Gives a detailed inforamation on the structure of the tram overhead, its parts, poles, such as frog pans, crossing pans, points, contactors ,broken trolley wire, pantograph operation and feeder cables. Has notes on the SCADA system and Carlton Electrical control system. Written at the time when trolley poles remained in operation.Yields information about the Melbourne tramway overhead system.Document 47 A4 pages, clear plastic cover, with card covers comb bound along top edge.tramways, tramcars, equipment, overhead, electrical engineering, trolley wire

Report - carbon typed copy - 43 foolscap sheets bound within a brown card folder, stapled, with signs of an adhesive tape binding on the outside. Titled "Information - Tram 980 (PCC Equipment)", dated February 1964, prepared by the MMTB Engineering Department Testing Department Report No. I 5/1/144. Signed by W. Hines 6/2/64, report prepared by CLF. Provides a synopsis of the report, purpose of investigation, design, operational history, time in workshops, maintenance program, schedule speeds, riding qualities, has appendices with design modification, list of time in workshops, PCC tramcars maintenance program, workshops maintenance of ten typical trams, MMTB Tramcar Schedule speeds. Includes photographs of the failure of the main body transom and the replacement one, and two graphs. Second copy added 31-5-2016 from donation of Geoff Warburton. This copy - has red binding tape.trams, tramways, testing, pcc, preston workshops, reports, specification, tramcar manufacture, tramcar design, maintenance, tram 980