A travelling case featuring curved metal panels across the base, creating compartments to house tennis balls and at least two racquets. Three cloth straps feature along the underside of the lid, probably also used to house racquets, or other equipment. Materials: Metal, Cardboard, Wood, Plastic, Cloth, Paper, Leather, Stringtennis

The poster has the following instructions for the treatment of snake bite:- "A ligature, that is, a strong string or narrow strip of clothing if no string is to be had, should be at once applied near the bitten part, and between the bite and the heart. tight enough to stop the circulation. The bitten part should then be immediately cut out by making, in the manner shown in the engravings, two curved incisions, which should be, where practicable, a quarter of an inch deep. The wound should then be well sucked for then minutes, by persons who have no wound, cut, sore or ulcer in their mouths, or on their lips. When the bite is on the head, face or body, or on any place where a ligature cannot be applied, the bitten part should be kept tightly pinched up till it can be cut out." The poster was authorised by T.R. Wilson, Secretary of Melbourne's Central Board of Health, between 1865 and 1881. It was printed by John Ferres, Government Printer, Melbourne, 1865-1881. The Central Board of Health, Melbourne, was in existence between 1855 and 1889. This poster has significance as an early record of public health instruction issued by the Central Board of Health in Melbourne for the treatment of snake-bite. The materials used to mount and frame the poster are also of significance, with the printing being done on fabric, and the newspaper inserted between the poster and the backboards.Timber-framed rectangular poster with printed instructions for treating a snake bite. The poster is printed on fabric. Between the poster and the backboards is a layer of newspaper, revealed by the damaged fabric. The back of the frame is filled by three vertical timber panels that are strengthened by three horizontal timber slats across the top, centre and bottom. The timbers are fixed in place with nails. The edges of the frame at the back have remnants of paper. Two metal eyelets are inserted into the top edge of the frame. The poster was issued by the Central Board of Health in Melbourne and printed by the Government Printer in Melbourne. It has the British Coat of Arms on top, diagrams and text, plus sections of newsprint.Symbol of [British Coat of Arms] between the letters "V." and "R." Headline "CENTRAL BOARD OF HEALTH" Subheading "WHAT TO DO IN CASE OF SNAKE-BITE" Instructions are printed on the poster. Diagrams include a bite on the knee and bites on the hand. Publisher "Central Board of Health, Melbourne, 28th February ----" "(By Order of the Board), T.R. WILSON, Secretary" "BY AUTHORITY, - - - - - - - - -, GOVERNMENT PRINTER, MELBOURNE" Newsprint includes:- "Duties in the bay were put ... --rried out. On ... harbour boat's cr-- ... , and formed of sufficient ... given ... to vessels in distress, and ... life-b- ... the help of a few..." and "last, a Gold English ... engraved -- cove-- to leave it at F.P. ..."flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, central board of health, melbourne, t.r. wilson, secretasry, government printer, john ferres, snake-bite, treatment, first aid, 19th century, poster, government health announcement

This First Aid Case was used which was used at the the former Carnegie Senior Citizens' Centre. The centre was located at 314 Neerim Road, Carnegie. When the Neerim Road facility closed, its activities were moved to the Carnegie Library and Community Centre. Cream metal first aid case. Case is hinged on the long side, and has a handle and latch on the side opposite the hinge. Blue, gold, red and cream "Sanax First Aid Ambulance Case" label on lid featuring cross icon and flaming torch icon. Cream enamel paint has been painted over the exterior of the case, minor areas of overlap on label. Interior of case is split into three sections. Two narrow brackets on interior of lid to hold pen sized items. One rectangular bracket on interior of lid to hold paper or card. Two round mounting brackets on top edge of case. Contents include five glass medicine bottles, plastic tablet container, metal tweezers, two pairs medical scissors, glass eye dropper, brass thumbtacks, cardboard instruction booklet, rubber tourniquet. "Sanax" TRADE MARK / FIRST AID / AMBULANCE / CASE

The Stainsby Braillewriter was utilised by Braille tutors and volunteers as well the blind and visually impaired. Stored in a brown cardboard lockable case and this complete kit consists of a metal Braille writing machine; a long slim rectangular device with carriage and six silver keys and a bell, a metal board to attach Braille writer, a metal hinged Braille paper clamp and an instructional booklet. Henry Stainsby (1859-1925), Supt. of the Birmingham Royal Institution for the Blind, (later General Secretary of the British & Foreign Blind Association) along with Birmingham manufacturer Albert Wayne, introduced their portable brailler writer around 1903. An "improved" version, featuring aluminum parts and a paper clamp allowing accurate interpointing or interlining, was announced in "Outlook for the Blind" as early as 1927 and available generally by 1933 in the RNIB catalog. By 1978, RNIB sold the Improved Stainsby in a number of formats, including a large version available with interlining and inter-pointing board, and a small version with a folding board. Both large and small models came in ordinary and reverse keyed versions. Silver Brailler, rectangular with six silver keys and a bell, with paper board and clip, in cardboard suitcaseM8839 M88 (Brailler) M 8839 (Board) On the outside of the suitcase an address label reads "Braille Library, 31-51 Commercial Road, South Yarra". braille equipment, assistive devices

Newspaper clipping from the Bendigo Advertiser, pages 1 and 2, Tuesday April 18, 1972, the after the commencement of bus operations following the closure of the SEC operated system. Front page has an article titled ""Buses were a little late at first" - about the late running of buses after the change over. On page two are three letters to the editor concerning trams and buses. 1 - "Tram Museum states its case for Bgo trams" - letter from L. N. Millar, Secretary of the TMSV about the actions of the Bendigo Trust and what the TMSV had planned to collect from Bendigo. 2 - "Keep Bendigo the way it is", signed "Bendigonian" about tourism in Bendigo and keeping the landscapes. 3 - "Bus Depot at Charing Cross", signed by David Drummond about bus routes and the impact on Bendigo traffic. Made a number of suggestions about bus routing. bendigo, tmsv, bendigo trust, buses, closure, bus replacement

Home manicure sets became increasingly popular during the 1920s. The manicure tools are made of steel and the handles and case are fashioned from xylonite, a form of celluloid. Xylonite (derived from the Greek word ‘xylon’ meaning ‘wood’) is best known for use in products made by the British Xylonite Co. Ltd. Among the earliest items made from the material were knife handles, tubes and insulating materials for electric cables. Because of its light-weight and durability, xylonite became widely used in domestic items such as coral jewellery and manicure sets throughout the early twentieth century. This item does not bear a brand name but was manufactured in England c1932 This item is significant because it is representative of accessories used by women in the early part of the Twentieth century and was donated by a member of the Wodonga Community.A shell shaped manicure case made from xylonite or celluloid. The case is lined with blue velvet. The set includes nail scissors, a nail file and buffer as well as other implements. Also in the set are 2 small round containers.On back of case: Made in Englandvintage manicure set, women's accessories

Calling Card Cases were used by the aristocracy in 18th Century Europe as it was requirement in genteel society to leave a calling card when visiting a household. According to the Hallmarks on the case it was made in 1774 by the Adie Brothers Ltd. in Birmingham, England.The social history objects held in the Burke Museum's collection help to tell the stories of Beechworth's past by showing the social, cultural, and economic aspects of the town's history.A silver rectangular case that features an angled hinged lid.LID: Lion symbol / B (Hallmarks) LIP: A BROS LTD/ Anchor symbol / Lion symbol / B (Hallmarks) CASE BACK: A157418th century, european

Stamp cases/holders began being produced in the late 19th century, commonly made of gold, wood, and silver. In this case, the item is made of sterling silver and has patterns and details etched into the metal sheets that make up the case. Sterling silver is the standard alloy used in jewellery and detailed metalworks with its physical properties making it maleable and corrosion resistant, therefore a favourable metal to work with both across many centuriesn the past and present. Stamp cases where popularised by James Allen of Birmingham who created and registered the stamp holders he made. As they gained popularity, it was common for stamp holders to consist of multiple compartments holding various small items such as matches, strikers and of course stamps. Metalwork and silverwork has been a prominent proffession and artform historically and socially for many years. There are many different types of metal work to specialise in and distinct patterns and inscriptions for identifying the provenance of the item. Hallmarking is this proccess of inscribing the item, and consissts of four main components (including assaying) which can indicate the date of creation. Unfortunately this item has no hallmark, therefore it is relatively unknown where, what, when and who created it.This item is of social and historic significance as it highlights the importance of preserving histoical items. This item display's the intricate and highly skilled trades of the past with a glimpse into the social and cultural aspects of the beechworths' history.A small, silver stamp holder with decorative details etched into the metal. It has a small loop on the left side of the case, indicating it could be connected and held by a chain or ring. A01145 (obejct number): A01145 [object number inside stamp case] / STERLING SILVER [inscription inside stamp case]metalwork, silver, silverware, sterling silver, stamp holder, stamp case, burke museum, social history, burke museum collection, beechworth

The hallmarks on this silver cigarette case indicate that the object was made in Birmingham (anchor hallmark), is Stirling silver (lion hallmark), and was made 1900 (a hallmark) by the Alexander Clark Manufacturing Co. (makers mark hallmark). The Alexander Clark Manufacturing Co. was established in 1890-1891 at Fenchurch Street, London, forming an alliance with Sheffield cutler R F Mosley in 1900 before later moving to Birmingham. Dates of the exact move to Birmingham differ from site to site.The hallmarks on this object make it significant in the representation of silver wares made by the Alexander Clark Manufacturing Co. which, when added to the other pieces of information available about this manufacturer, add to the information and history available. As the Alexander Clark Manufacturing Co. was based in England, this is of international significance. The social history objects held in the Burke Museum's collection help to tell the stories of Beechworth's past by showing the social, cultural, and economic aspects of the town's history.A small rectangular case silver in colour, with gold wash on the inside. The case has a clasp along one edge, a swirling floral design on its top, and two brown elastic straps on the inside.AC [over] MCo / Anchor symbol / Lion symbol / a [Hallmark inside case, lower LHS] Lion symbol / a [Hallmark inside case, upper RHSD]accessories, social history, burke museum, silver

This item was captured by H.Q. Coy, 2/14 Battalion at Balikpapan, Borneo 1945, probably by Tom Aldrick (given the inscription on the leather case). Tom Aldrick has donated other items taken from captured Japanese soldiers to the Dandenong-Cranbourne RSL.Black adjustable binoculars with brown leather strap and brown leather case with buckle strap. Case has blue/grey velvet lining and a leather belt strap. Clasp is missing. There is a Japanese inscription inside the case lid in black ink. Three Japanese characters are depicted. Adjacent to the right eyepiece there are also Japanese characters that have been inscribed into the surface with a sharp implement. Beige label adhered to front of case with "ALDRICK" handwritten in ink.binoculars, japanese binoculars, balikpapan, borneo, 1945

In the 1820s perforated cardboard first became available. Then, with the invention of the printing press, designs such as sentimental or religious mottos were pre-printed on the card and a Victorian craze began as it provided a simpler and cheaper method of embroidering for the masses compared to the previously far more expensive linen embroidery. Over the following decades embroidering of punched-card grew enormously in popularity and a variety of articles from Christmas decorations to birthday cards, and in this case a Neele case to celebrate Queen Victoria's golden Jubilee in 1887. The pioneer settlers and market gardeners of Moorabbin Shire had to be self reliant and made their own clothing and utensils. This is one of many items used to exhibit the skill and craftsmanship of the women in these families. Small cream coloured Punched-Cardboard needle case,with red satin lining and red cross-stitch decoration. The case contains four paper packets each containing sewing needles of a different gauge. Each packet of needles is 3 1/2 cms long and 1 cm wide. The size of the needles In red cot tonCross stitch on one side of the card needle case the word "NEEDLES" is embroidered, and on the other side the word "JUBILEE". Inside the needle case is four packets of different sized needles, by Wm Mattins1887, queen victorias golden jubilee, victorian punched card work, hand embroidery, different packets, different gauge sharp needles, wm shrimpton and sons, william mattins, abel morrals, copestakes, cross stitch

These contact lenses represent some of the earliest lenses used in Australia. They were made in Germany and distributed in Australia. Very few optometrists were involved with contact lenses in the 1930's.These lenses are rare as few glass contact lenses have survived intact from the 1930's.Pair of glass scleral contact lenses in D-shaped plastic hinged case. Case for right lens includes rubber suction lens handler.Right case:25/8 R -2, Left case:5/8 L -3. Case cover impressed:Carl Zeiss Jena/ Made in Germanyoptometry, contact lenses, scleral lenses, carl zeiss

Razors were standard issue to soldiers. Having been issued with a razor they had no excuse for not shaving.Gillette razor and blade in metal case. Case painted blue with gold coloured border on lid.Case has Gillette trade mark on lidshaving gear, razor

In 1902, William E Sessions and other family members purchased a controlling interest in the E.N. Welch Company, a clock manufacturer located in Forestville, Connecticut. Sessions' father owned a foundry located in the town of Bristol, Connecticut that produced cases for E.N Welch Co. On January 9, 1903, the company was reorganized and registered as The “Sessions Clock Company”. Within a few years the Sessions Clock Company was producing clock movements, cases, dials, artwork and castings for their line of mechanical clocks. Between 1903 and 1933 Sessions produced 52 models of mechanical clocks, ranging from Advertisers, large and small clocks with logos of various businesses, to wall, or regulator clocks, and shelf or mantel clocks, designed for the home. Many of the Session clocks from this period are prized by collectors. In 1930, the company expanded to produce electric clocks and timers for radios, while continuing to produce traditional brass mechanical movements. Beginning at the end of World War II Sessions W Model (electric) was widely used by various casting companies for their clocks. The dial of the W Model read Movement by Sessions. In the early 1950s Sessions begin to produce timers for television. In 1956, Sessions was absorbed by a company interested mainly in their timing devices. In 1959, William K. Sessions, grandson of William E. Sessions left the Sessions Clock Company and formed the New England Clock Company. In 1960, one of the Sessions Clock buildings was sold to the Bristol Instrument Gears Company. Kept as the Sessions Company, the new owners ran the operation until 1969 when changes in the market forced the Sessions Company into liquidation. In 1970, the remaining buildings were sold to Dabko Industries, a machine parts manufacturer.The item marks a time when clock production in America was at it’s peak producing clocks for sale in many countries, they were keenly priced, mass produced and available to all. The company had a relatively short life span life regards clock manufacture later diversifying into electric timer mechanisms. Yet it was perhaps inevitable with the advent of electricity along with stiff competition from other clock manufactures that would ultimately herald the end in 1935 of the Sessions company's ability to continue manufacturing mechanical clocks. Clock mantle type face set in a painted black case designed to represent a Greek building with gold decorative pillars. Free standing with decorative feet. No markings or inscriptions on clock case or mechanism flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, sessions, mantel clock, clock, clock industries

The Wodonga Historical Society Haeusler Collection provides invaluable insight into life in late nineteenth and early twentieth century north east Victoria. The collection comprises manuscripts, personal artefacts used by the Haeusler family on their farm in Wodonga, and a set of glass negatives which offer a unique visual snapshot of the domestic and social lives of the Haeusler family and local Wodonga community. The Haeusler family migrated from Prussia (Germany) to South Australia in the 1840s and 1850s, before purchasing 100 acres of Crown Land made available under the Victorian Lands Act 1862 (also known as ‘Duffy’s Land Act’) in 1866 in what is now Wodonga West. The Haeusler family were one of several German families to migrate from South Australia to Wodonga in the 1860s. This tape recorder was manufactured in 1961 by German company Grundig, established in Nuremberg in 1945. Grundig had the reputation of making some of the highest quality audio equipment in the mid twentieth century. The Haeusler Collection tape recorder could be used to listen to and record music and other sound, and was fully portable. This item has well documented provenance and a known owner. It forms part of a significant and representative historical collection which reflects the local history of Wodonga. It contributes to our understanding of domestic and family life in early twentieth century Wodonga, as well as providing interpretative capacity for themes including local history, social history, and women’s history.A mid century reel to reel tape recorder, stored inside a portable carry case with handle. "44327" on removable label on front of case/"TK1" on lid of case.tape recorder, tape, music, radio, haeusler, haeusler collection, wodonga

A pair of hand held, folding spectacles with tortoiseshell frame 'Glarex' brand with a 2 part case'GLAREX' on case

This is a needle book containing needles. It appears that the Army and Navy Needle books were not issued to soldiers or sailors but were made for home use in the Western World - Europe, America and presumably Australia. They were made mainly in Germany and some were made in Japan but were not sold in wartime. They were sold before and after World War Two and often featured images of well-known ships of the day. This folder has images of the Europa and the Bremen, two ships made in Germany which belonged to the Norddeutscher Lloyd Line (N.D.L.) and which were launched in the late 1920s. They were the two most advanced high speed steam turbine ocean liners of their day. The Bremen was gutted by fire in 1941. The Europa was captured by the Allies in 1945 and used as a troopship, then it went to France where it was became an ocean liner named Liberte. It was scrapped in 1963. The newspaper cutting tells of a presentation by the Warrnambool Woollen Mill to Private Les Lawlor on his embarking for overseas service. It is not known to which war the cutting refers and no reference can be found to Private Les Lawlor. No connection between the two items (needle book and cutting) has been established but they have always been together in our collection. The needle book is of social significance but has no known local provenance. The cutting contains information suitable for our files.1 This is a piece of thickened paper folded in two to make a folder containing four packets of needles. The folder is green with two images of ships on the back and the front. The images are multi-coloured and have an ornamental edging. The needles of different sizes are contained in black paper folded four times to enclose the needles (13 still in the folded paper – all rusty). It appears one needle packet may be missing. .2 This is a cutting from a newspaper regarding a soldier leaving for overseas military service. There is no date.‘The Army and Navy Needle Book’ ‘Made in Germany’ ‘Silver Steel’‘Superior Quality Royal Drilldeyd Sharps 1 Made in Germany’ ‘Superior Quality Royal Drilldeyd Sharps 1/5 Made in Germany’ ‘Superior Quality Royal Drilldeyd Sharps 5 Made in Germany’ ‘Superior Quality Royal Drilldeyd Sharps 6 Made in Germany’ needle books, ship bremen, ship europa, private les lawlor, warrnambool woollen mill

In early 2003 bush fires covered much of North East Victoria. Submissions were requested by the 'House Select Committee' for comment on various aspects of the fire in order to help prevent bush fires in the future.Simon Paton is a local resident of the Kiewa Valley where the bush fires occurred. His report includes other residents statements on various aspects of the fire and its prevention and impact on the local area. A booklet of 45 A4 pages with clear plastic cover bounded by black plastic spine. A Submission to the House select Committee on the recent Australian bushfires 29 April 2003. Submission Convenor: Simon Paton, Callaghans Creek, VictoriaThroughout in black pen markings and notes.2003 bush fires; north east victoria

This is a car picnic set made by the English firm of G. W. Scott and Sons who were producers of wickerwork crafts, basketry and luxury leather goods. The business was founded in 1661 and ceased operations in 1967. The picnic set belonged to Dr Horace Iles Holmes (1877-1959) who was born and educated in Tasmania and completed a medical degree at Melbourne University. He commenced a practice in Warrnambool in 1906 and was the Honorary Medical Officer at the Warrnambool Hospital and Warrnambool’s Health Officer. His practice was at ‘Ierne’ at the corner of Spence and Kepler Streets. He was an early member of the Royal Australian College of Surgeons and was prominent in Warrnambool community affairs (Foundation President of Warrnmbool Rotary Club, a member of the local Masonic Lodge for over 50 years, Warrnambool Hospital Committee member, long-term Trustee of the Warrnambool Methodist Church and President of the Lyndoch Hostel for the Aged Committee). Dr Holmes also had agricultural interests and enjoyed fishing, golf and bowls. He also had a motor car and this picnic set would have been used for family picnics. This picnic set is of considerable significance because: 1. It is a good example of the luxury picnic sets owned by more affluent people in the 1930s and 40s. 2. It has important local provenance as it belonged to Horace Holmes, a doctor associated with the professional and community life of Warrnambool for over 50 years. This is a rectangular wooden box with a leather covering. It has metal hinges on the corners of the box and two two metal catches on the side with a leather belt and metal buckle on one of these catches with one leather belt missing on the other side. These leather straps were to attach the picnic box to the running board of the car. There are also two metal catches or locks on the front of the box. Inside the box there is a white lining with a plaited wickerwork insert containing spaces for the following: 1. large china container with a silver top 2. smaller metal container with a silver lid 3. small rectangular metal tin with a silver lid. This container still has some loose tea leaves inside 4. four china cups 5. two circular china dishes for jam and butter 6. four china saucers 7. one glass bottle with a silver top 8. one metal phial, silver-coloured 9. one amber-coloured glass bottle (probably not an original) 10. four nickel silver spoons 11. three metal forks 12. three white enamel plates, blue edged Numbers 10,11 and 12 are held in place by leather straps on the inside of the lid of the box 13. two loose metal straps 14. one metal kettle with a handle with cane strapping, a brass lid, a brass spout with an end chain and a metal inscription 15. The kettle is sitting in a metal tray which has a lighting mechanism to heat the water The picnic set has some rusted metal catches on the exterior of the box and the leather is very stained and torn in places. ‘Remove screw before lighting G.W.S. & S ‘ ‘Coracle brand’ antique luxury picnic set, dr horace holmes, history of warrnambool

scientific instrument, cylinder slide rule, cylindrical logarithmic slide rule

119 pages text and black and white line drawings and tables. One colour fold out map. White plastic binding. non-fictionshire of diamond valley, leisure activities, sport

Brief account of the slow progress of Australian women towards equality with men to 1960s.2 p. from Ancestor, Winter and Spring 1991, p. 12-13women in australia, gender equality, ancestor (magazine)

Personal account of a common 'crisis' situation, written by GHS member Atis Lejins.5 p. typescriptatis lejins