Report - 149 A4 pages, brown comb bound, orange card covers with two pasted on labels on the front cover. Titled "Chopper Control for Trams". Funded by the Australian Government Transport (Planning and Research) Act 1974, prepared by the MMTB Engineering Department Technical Services Department. Gives an introduction to chopper control technology, summary of the findings of the study, 25% saving in energy. Has a table of contents on page 8, many graphs, including impact of regeneration on W class tram, electromagnetic impact and many photographs of the test equipment. Includes the test program.Front and back covers stamped "Tramway Workshop Library Preston", and in top right hand corner in ink "(Z Tram #5) (1977) " and in pencil "Spare Copy"trams, tramways, mmtb, reports, testing, preston workshops, chopper control, controllers, z class, tram 5

Report - approximately 350 pages, with heavy card covers, leather corners and centre and spine titled with letters in gold block "Australian and New Zealand Tramways / Fourth Conference Sydney March 1934" and name "H. Stephenson" on front bottom edge. Perfect bound with glued end covers. Details the proceedings of the conference held from 19th to 23rd March 1934, attendees, papers, appendices. Covers all engineering, operations and technical aspects of Australian and NZ tramways. Attending were representatives from Adelaide, Auckland, Brisbane, Dunedin, Hobart, Melbourne and Sydney. Detailed table of contents, program and attendees.trams, tramways, conferences, sydney, tramways, equipment, rails, mmtb

Provides a detailed list, not fully comprehensive, of purchase contracts for the MMTB between 1919 and 1969. Lists Buildings Cable wire ropes Cable grip dies General - punch card systems, advertising on trams Miscellaneous Vehicles Motor buses and Garage equipment Permanent Way Equipment Poles - steel and wooden Rail bonds Special trackwork Substation Equipment Traffic - ticket issuing machines and radio equipment Trams and bodies Tram equipment Tram rails Trolley Wire Workshops EquipmentYields information about MMTB Purchases between 1919 and 1969 - not complete.Document - 50 Foolscap sheets - photocopied.mmtb, tramways, contracts, purchases, workshops, trams, buses, trackwork, buildings, depots

Set of two form/s or tags or dockets, form number 3/586, used to tag equipment from a tram depot to Preston workshops. A similar document would have been used for the return - most likely by the Freight Tram. Preprinted on light card with a two reinforcing pieces around the top hole with the printers details on the piece - Victa Tag. .1 - 12/5/1964 - from Camberwell to Preston Stores - 9 x ? aluminium - return to stock. .2 - 17/3/1954? - from Hawthorn Depot to Preston Workshops - 1 motorman's seat for repair.trams, tramways, preston workshops, forms, camberwell depot, stores department, hawthorn depot, equipment

Specification or Tender Document - titled "Design, Manufacture and delivery of 100 only all-electric trams", and "Background Information and Preliminary Specification", dated June 1965. Bound into a brown foolscap card cover. Details the conditions of tender, conditions of contract, notes, specification, gives background information about Melbourne, dimensions, performance, drivers and conductors, trucks, wheels, brakes, electrical equipment, control panels and drawings. The drawings give a map of the system, typical city route, Glenferrie Road route (grade diagram), concrete track construction, min. radius curves, loading gauge, all-electric tram and mounting details for the trolley base, schedule of prices, tender form, form of contract, schedule of information to be provided by the tenderer. Comprises: 1 - Conditions of Tendering - 1 page 2 - Conditions of Contract - 4 pages 3 - Contents - 3 pages 4 - Notes for prospective tenderers - dated June 1965 5 - General nature of contract - 21 pages 6 - Appendix A - climate data - two sheets 7 - List of 14 appended drawings 8 - O.6887A - cross section of trolley wire 9 - P.13855 - Glenferrie Road, Longitudinal Section 10 - P.13856 - Wattle Park Route 11 - P.13857 - East Preston Route 12 - P13858 - Concrete track construction 13 - P13859 - Open track construction 14 - P.13860 - Paved ballast track construction 15 - P.13887 - Tram Route - locations of substations and section switches 16 - P.13888 - Minimum radius service curves to give minimum clearance between tramcars 17 - P.13889 - Grooved Rail - 102 pounds per yard and tire profile 18 - R10-301 - Loading gauge, proposed electric tramcars 19 - R9706K - Rolling stock data, tramcars 20 - R10306 - Collins Points Shifter - Wiring diagram. 21 - Schedule of data to be supplied by the tenderer 22 - notes on Automatic Points shifters - 2 sheets 23 - Tender prices and delivery periods - 2 sheets. See Reg Item 2266 for the 1972 version and 1583 for the August 1966 version. See Reg Item 4049 for associated newspaper cuttings. See file htd4667i1.pdf for scans of the drawings.In ink in top right hand corner - "Lees"trams, tramways, specification, tenders, z class, mmtb, melbourne

Set of two form/s or tags or dockets, most likely used to tag equipment, possibly a motor or bearing at a tram depot or Preston workshops. Handwritten on light card with a two reinforcing pieces around the top hole with the printers details on the piece. .1 - 22/9/71 - 756 28T .2 - 26/1/72 - 381 MV.101AXtrams, tramways, preston workshops, forms, stores department, equipment, motors, bearings

Instruction - 64 pages + light brown card cover centre stapled with cloth binding on outer edge + fold out drawing inside the rear cover, titled "Westinghouse - T5001-1 SM3 Straight-Air Brake Equipment". Dated March 1927. Has a table of contents, outlines the rules of operating brake equipment fitted to tramcars, the SM3 and PV brake valves, SX2 brake valve, locomotive straight air, installation piping, wiring, maintenance - piston travel, lubrication, car tests, hints to Motormen and Conductors and General Hints. Includes instructions on compressors, air intakes, valves, cylinders and governors.On inside cover "Bob Prentice 13 High Street Prahran Vic 3181" and on top of first page "W. Armstrong"trams, tramways, electrical engineering, electrical equipment, westinghouse, air compressors, brakes, instructions, maintenance

Instruction - 92 pages + light brown card cover centre stapled with cloth binding on outer edge, titled "Westinghouse - T5002 - Motor Driven Air Compressors for Electric Railway Service". Dated January 1938". Has a table of contents, giving details for motor driven compressors, DH, D-EG, D-F, D-K, D-4-P, XQ-27, C. air strainers and installation. Includes instructions on compressors, air intakes, inspection and maintenance and disorders - causes and remedies.On inside cover "Bob Prentice 13 High Street Prahran Vic 3181" and on top of first page "W. Armstrong"trams, tramways, electrical engineering, electrical equipment, westinghouse, air compressors, instructions, maintenance

Book - six sections, 134 pages + end pages + heavy card covered with a red stippled paper titled "The Electric Tramcar Handbook", 7th Edition, written by W. A. Agnew, published by H. Alabaster, Gatehouse & Co. Ludgate Hill in 1915. Right hand of sheets rounded. Has a table of contents and index at the rear. Written for Motormen, Inspectors and depot workers. Covers many aspects of the electric circuits for trams, including controller diagrams, tramways, tramcars, controllers, overhead, brakes, on the road and faults and Breakdowns. Would have been a reference guide for training staff. Scanned in three pdf files.trams, tramways, electrical engineering, electrical equipment, air compressors, brakes, instructions, maintenance, tramcars, training, controllers, overhead

Instruction - 108 pages + 9 fold out drawings glued and stapled in at the rear + card covers with red cloth binding, rounded right hand edges, centre stapled. Titled "Instruction Pamphlet S-100, Air Brake and Safety Car Control Equipment", published July 1924 by the Safety Car Devices Co. St Louis. Includes the M28 Brake valve. Describes in detail the rules for operation, parts, description, M28 Brake Valves, Maintenance, Practical car tests, hints, defects. The 9 drawings at the rear of the document give detail arrangements of the piping and control equipment. Book scanned into three sections. See also Reg Item 3513 for another similar document.on top of first page "C. Hodgson"trams, tramways, electrical engineering, electrical equipment, air compressors, brakes, instructions, maintenance, controllers

Instruction - 48 pages + light brown card cover centre stapled with cloth binding on outer edge + 13 fold out drawings inside the rear cover, titled "Westinghouse - T5001-1 Straight-Air Brake Equipment". Dated March 1923. Has a table of contents, outlines the rules of operating brake equipment fitted to tramcars, the SM3, SX2 brake valve, locomotive straight air, installation piping, wiring, maintenance - piston travel, lubrication, car tests, hints to Motormen and Conductors and General Hints. Schedule for SM-1 and featherweight equipment. Includes instructions on compressors, air intakes, valves, cylinders and governors.On front cover in ink "Mr McLaren"trams, tramways, electrical engineering, electrical equipment, westinghouse, air compressors, brakes, instructions, maintenance

Book - 170 pages, 10 sections sewn and bound into heavy green card covers cloth covered with glued end pages. Title "Miscellaneous Tests on Car Equipment" for electric street car or trams written by Eugene C Parham and John C Shedd, published by McGraw Hill Book Co. of New York, dated 1910. Has a table of contents, index at the rear, and index of Rules for determining sizes of electrical equipment and tramcar horsepower and kilowatts, traction and speeds. Cover sheets, table of contents and indexes scanned to a pdf file.In a number of places "The Electric Supply Company of Victoria Limited" stamped throughout the book.trams, tramways, electrical engineering, electrical equipment, tramcars, maintenance, motors

Comb bound (white plastic) specification or tender document, approx. 180 pages, with glossy card orange covers, titled "Tender Schedule for Electric Trams" and "Contract 3000". Compiled and published by the Melbourne and Metropolitan Tramways Board, closing Monday 10 May 1977. Details the conditions of tender, conditions of contract, notes, specification, gives background information about Melbourne, dimensions, performance, drivers and conductors, trucks, wheels, brakes, electrical equipment, control panels and drawings. The drawings give a map of the system, typical city route, Glenferrie Road route (grade diagram), concrete track construction, min. radius curves, loading gauge, all-electric tram and mounting details for the trolley base, schedule of prices, tender form, form of contract, schedule of information to be provided by the tenderer. Includes an Alphabetical Index. Includes a drawing for a single ended version of the tramcar. Became the Z3 class. Only the table of contents and the drawings scanned. See Reg Items 1583 and 2266 for other similar documents. See Reg Items 337 and 338 for a report on the operation of single ended tramcars 2 copies held.Has in ink written on front cover "J Armstrong" with a stamp blacked out and other copy of the same signature.trams, tramways, z3 class, specification, tenders, mmtb, melbourne, single ended tramcars

Set of 7 manuals, documents, instructions regarding truck, bus, motors produced by Volvo. .1 - Volvo Truck facts – 88-89 - approx. 70 pages with diagrams, card covers. .2 - Volvo bus data sheet set - 9 foolscap sheets with data on chassis, servicing and general specifications. .3 - Lubrication recommendations for Volvo buses – post 1950 - Foolscap - approx. 40 sheets. .4 - Volvo Service bulletin – service intervals for oil and filter - single A4 sheet. .5 - Volvo service bulletin – Lubricating oil and recommendations - single foolscap sheet, .6 - Volvo turbo diesel and its Bosch injection system - manila folder containing about a 30 pages document titled "The Volvo TD100A Engine". .7 - Letter to MMTB 1977 re oils from Volvo Australia - correspondence - 10 sheets - dated 3/6/1977, with a note saying it does not answer the question.trams, tramways, volvo, buses, instructions, manual, equipment, maintenance

Pamphlet or Catalogue - 16 A4 pages + card cover - full colour centre stapled titled "Austbreck" providing a detail over view of the company, its products and locations. c2000 Company provides pantographs, overhead traction systems for rail and tram, crane trolley systems, design and project management. Includes brush holders, isolation systems and insulation.trams, tramways, overhead, electrical engineering, trolley wire, pantographs, electrical equipment

Document produced by the Transit Research Corporation of New York, details the specifications for the Presidents Conference Committee (PCC) for a streetcar or tram for American cities. The MMTB researched this type of tramcar for use in Melbourne, taking out a licence for their production. This document dated 1/4/1947 with revision to 1/6/1950 would have been part of the licence agreement. Unfortunately, there were insufficient funds to build this type of tramcar. Only tram 980 which was based on a modified W6 class body was fitted with PCC equipment, later transferred to prototype PCC tram 101. See reference.Yields information about the technical specification for US PCC tramcars.Document - bound with card covers, approx 300 printed pages including folded drawings held by an Arnos type steel binding clip,On the spine with a green/white label "Specifications for PCC Car"tramways, tramcars, pcc, new trams, tramcar specifications

Document - full title "Met Tram Overhead appreciation for Met Tram Officers & Tram Drivers" Gives a detailed inforamation on the structure of the tram overhead, its parts, poles, such as frog pans, crossing pans, points, contactors ,broken trolley wire, pantograph operation and feeder cables. Has notes on the SCADA system and Carlton Electrical control system. Written at the time when trolley poles remained in operation.Yields information about the Melbourne tramway overhead system.Document 47 A4 pages, clear plastic cover, with card covers comb bound along top edge.tramways, tramcars, equipment, overhead, electrical engineering, trolley wire

Report - carbon typed copy - 43 foolscap sheets bound within a brown card folder, stapled, with signs of an adhesive tape binding on the outside. Titled "Information - Tram 980 (PCC Equipment)", dated February 1964, prepared by the MMTB Engineering Department Testing Department Report No. I 5/1/144. Signed by W. Hines 6/2/64, report prepared by CLF. Provides a synopsis of the report, purpose of investigation, design, operational history, time in workshops, maintenance program, schedule speeds, riding qualities, has appendices with design modification, list of time in workshops, PCC tramcars maintenance program, workshops maintenance of ten typical trams, MMTB Tramcar Schedule speeds. Includes photographs of the failure of the main body transom and the replacement one, and two graphs. Second copy added 31-5-2016 from donation of Geoff Warburton. This copy - has red binding tape.trams, tramways, testing, pcc, preston workshops, reports, specification, tramcar manufacture, tramcar design, maintenance, tram 980

Hawthorn Tramways Trust form No. 199, recording the inspection, greasing and brake equipment of tramcars. Printed for cars 1 to 32 with items to be inspected or changed listed. Has been marked up in pencil for changes to the layout, possibly at the time of the takeover of the Trust by the MMTB and the formation of the Eastern System. Has a space for remarks on the rear. Note the "speed alarms" entry.Demonstrates an HTT tramcar maintenance form.Printed form on pink card - form No. 99tramways, htt, forms, tramcar maintenance, tramcar inspection, brakes

Folder with The Met logo on the cover containing five separate A4 pamphlets fact sheets marketing or promoting the Metcard system. Written for use by staff, part of the consultation process. 1 - How long will it take? - two phases - double sided 2 - What equipment will be on my tram? - single sided 3 - Consultation and operation - single sided 4 - What's it all about & why will it be good for Melbourne? - doublesided 5 - General fact sheet - about services, fare evasion, staffing, ticket availability, information, costs and implementation - folded A3 sheet.Yields information about the introduction of Metcard for The Met staff.Card folder containing five A4 marketing pamphlets about Automated Ticketing.trams, tramways, metcard, the met, tickets, ticket machines

Olympic Notebook - or Memo book, 128 pages, 4 sections, sewn within a cloth bound colour card cover. Note book, handwritten details the work carried out on MMTB trams between June 1974 and October 1975 at various depots. Proves the car number, depot, date, brief description of work. Entries have been individually crossed out, perhaps as a form written report completed. No details of the person who undertook the work. Has a small electrical sketch on the inside front cover.trams, tramways, electric motors, electrical equipment, mmtb, workshops, repairs

Booklet - A5 size, 40 pages plus card covers, titled "all you need to know about Victoria's new ticketing system", providing details of the Myki ticketing system, for employees, operators of the system. Provides information and diagrams and images of equipment, management systems, accounting and process flows, including equipment (tramcars) that was not installed and short trip tickets. Three copies held. No publication details provided in the booklet.trams, tramways, myki, tickets, melbourne, trams

Document or data sheet giving an elevation, floor plan, two internal sections and details of the W7 class tramcar including dimensions, equipment, trucks, weight, and passenger loading.Demonstrates a MMTB tramcar data sheet.Document - foolscap size, printed on a light card sheet.tramcars, class w7, data sheet, tram equipment

Report titled "Ropes - Trolley", dated October 1954 though has a date stamp on the first page of the report itself of 26/10/1955, prepared by the MMTB Testing Department, Report No. R7/1/43. Looks at the insulation resistance offered by trolley ropes when dry and wet, new and used ropes and the possibility of causing electric shocks. Gives a reference to a previous August 1952 test. Undertook examination of the ropes, electrical measurements and electrical measurements of the human body. Has a number of appendices and details the test results.Demonstrates a MMTB Laboratory investigation into trolley rope and electrical characteristics.Report - typed carbon copy - 18 foolscap sheets stapled within a brown card folder bound with red adhesive tape. trams, tramways, preston workshops, reports, specification, tramcars, trolley poles, equipment

This is a set of 1photographs of surveyors in the field measuring distances using chains, taking observations using theodolites and operating electric distance measurement equipment. They were probably employed in establishing mapping and geodetic control operations or the surveyors may have been in training. The photos were most likely taken in the 1950s and 1960s. Photos .1P to .6P feature personnel setting up geodetic survey chaining equipment to measure distances. The surveyor in Photo .5P is LTCOL Howard Angus Johnson MBE who served from 1936 to 1954. The RA Svy surveyor in photos .7P to .12P were using a theodolite to take angular measurements. They were usually supported by an observer who recording their readings on a booking form. The surveyor in Photo .10P and .11P is LTCOL Jorge Gruszka, who served from 1955 to 1985. He was CO of the Army Survey Regiment from 1982 to 1985. The surveyor in photo .13P is cutting an identification blaze on a tree using a hammer and chisel. The tellurometer in Photos .14P to .16P was a MRA1 microwave Electronic Distance Measuring instrument (EDM) introduced in 1958. It and later models were man-portable systems that improved geodetic survey efficiencies for rapid network extension and densification replacing triangulation with EDM and theodolite traverse sometimes using Bilby Towers to extend line lengths. The surveyor with the slouch hat is Colonel James ‘Jim’ Leslie Stedman, who served from 1941 to 1978. He was Director of Military Survey from 1975 to 1978 and was appointed as Colonel Commandant (honorary appointment, Retd) of the Royal Australian Survey Corps from 1978 to 1983. Jim Stedman is demonstrating EDM equipment.This is a set of 17 photographs of surveyors in the field measuring distances using chains, taking observations using theodolites and operating electric distance measurement (EDM) equipment. c1950s – 1960s. The photographs were printed on photographic paper and are part of the Army Survey Regiment’s Collection. The photographs were scanned at 300 dpi. .1) - Photo, black & white, c1950s, unidentified personnel using geodetic survey chaining equipment. .2) to .4) - Photo, black & white, c1950s, geodetic survey chaining equipment. .5) – Photo, black & white, c1950s, Jim Stedman using geodetic survey chaining equipment to measure distances. .6) - Photo, black & white, c1950s, Unidentified personnel geodetic survey chaining equipment. .7) – Photo, black & white, mounted on card, c1950s. Unidentified surveyor undertaking observations on a coral reef using a theodolite. .8) – Photo, black & white, c1950, unidentified surveyor undertaking observations with a Tavistock theodolite. .9) – Photo, black & white, mounted on green card, c1950s. Unidentified surveyor undertaking observations using a plane table. .10) – Photo, black & white, c1955, Jorge Gruszka undertaking observations with a theodolite. 7/55 Basic Survey Course Balcombe. .11) – Photo, black & white, c1950s, Jorge Gruszka undertaking observations with a theodolite. .12) – Photo, black & white, c1946-1948, unidentified surveyor undertaking observations with a theodolite to gain control for the mapping of the Snowy Mountain Diversion Scheme. .13) – Photo, black & white, c1950s, unidentified surveyor cutting a blaze in a tree. .14) and .15) – Photo, black & white, c1960s, Jim Stedman demonstrating EDM equipment. .16) – Photo, black & white, c1960s, L to R: Jim Stedman (probably) and unidentified surveyor demonstrating EDM equipment. .17) – Photo, black & white, 1956, Operation Cutlass - Surveyors SPR W. Crane and J.A. Campbell undertaking observations with a theodolite in extreme conditions..1P on back - First Order Chaining Equipment .2P on back - First Order Chaining Equipment .3P on back - Full catenary 1800 – 1960 replaced by EDM .4P on back - First Order Chaining Equipment .5P on back - H.A. Johnson, Benambra baseline? 1st Order Chaining .6P on back - Chaining .7P on front - Difficult observing conditions especially when the tide is in. The station is sighted (sic) on a coral reef. .8P on back - Tavistock. .10P on back of duplicate in Photo Folder 14 – George (sic) Gruszka 7/55 Basic Survey Course Balcomme (sic) 1955/56 .14P and .15P on back - Jim Stedman demonstrating early EDM equipment.royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, surveying

School Magazine 1956Blue card Cover with blue drawing of poppet head and other mining equipment Reefs Magazine of the Stawell Technical Schoolstawell education

These items are from the private collection of George Shirling of Red Onion, Falls Creek. This business card was used to promote Koki Alpine Resort and Equipment Hire. George Shirling arrived in Falls Creek in 1962. He engaged Phil Nowell to build the original Koki Alpine Lodge which opened in 1965 with 14 beds. George operated the lodge with Michael “Baldy” Blackwell as manager. He also graduated in sport psychology in 1981 and was invited to become team psychologist for the Australian Winter Olympic team which went to Albertville, France, in 1992. He later owned the Red Onion Chalet. George credited the success of Koki to “Baldy” Blackwell. “Baldy” and Phil Nowell started the Trackers Mountain Lodge in partnership during the 1980s. In 1971 George sold Koki Lodge to Sigi Doerr. In 2024 the renamed Koki Alpine resort remains a highly popular destination in Falls Creek. George Shirling passed away on 27th February 2023. He had remained actively involved in Falls Creek and was generous with his time and knowledge, always an amazing supporter of The Falls Creek Museum and Falls Creek Village.This items is significant because it was part of the advertising campaign for Koki Alpine Resort at Falls Creek, Victoria.A plastic business card bearing the logo and details of Koki Alpine Resort.george shirling, falls creek, koki lodge

Set of notes for the Provincial Tramways Maintenance meeting to be held in Bendigo on 30/5/1953 and in Geelong on 13/4/1953. Has a summary of actions from the 1952 conference (see item 8056) and the Agenda for the respective meetings. See item 8113 for the minutes of these meetings. Two copies held.Yields information and demonstrates SEC Meeting minutes about discussions between the three Provincial operators about tramcars and operations.Twenty Five foolscap typed sheets stapled in a landscape format to a folded manila card.secv, ballarat, trams, tramways, minutes, sec, geelong, bendigo, tramcar equipment, maintenance, trackwork, trolley wheels, motors, maximum traction, employees

Created as American motor vehicle first aid kit in World War 2 but used in Vietnam. Green metal first aid box with hinge, two metal clasps and metal carry handle. Inside lid has label "24 Unit Kit" and general first aid instructions.Kit contains 11 cardboard boxes containing: 3x 4 inch bandage compress, 2 inch bandage compress, eye dressings, 3 eye dressing sets, 3x burn injury set each with 2 orange tubes of ointment and small wooden spatula , 2 large first aid dressing, I card with 5 safety pins, one tourniquet with instruction label attached, jar of Vaseline, 2 x pieces of cotton fabric ( possibly cut from a singlet)'First aid for emergency use only"/ U.S. Army Medical departmentfirst aid, medical, united states equipment, kit, us army, bandages, tourniquet

Metal toolbox used for Engineering subject labelled VCAH ENG. Inside: Melco socket wrench, 0.05-0.50mm measures, 4 Stanley screwdrivers - 2 x 65-541, 65-549 and 2 Point Phillips 65-524, Sidchrome 22410 combination ring & open end spanner 7/16, Card - Check Ignition, Briggs & Stratton Spark Tester 19051 C. 1980 , Esco Nova 14 Piece Socket Set (with 2 pieces missing) in metal box.ROTA, VCAH ENGengineering, toolbox, teaching, tools