LOVELOCK LONDON 3 Metal Sausage Maker with white enamel lining throughout - open funnel on top of circular middle section which opens up to show metal grinding equipment - and circular opening at front - long metal handle for turning grinder has wooden end."LONDON LOVELOCK 3" on top of main cylindermin

This mincer was donated to the Slab Hut (Visitor Information Centre) as a display item.This domestic kitchen appliance is typical of the period when food processing was done at home. It would have been before the time of mass food processing factories.A cast iron food mincer with a wooden handle. It has a funnel shaped cup at the top through which the pieces of meat are pushed to come out of the side. The wooden handle is turned to help this action. It has one blade. The mincer clamps to a flat surface by a hand operated vice/screw. MODEL No 2food-preparation mincer appliance kitchen domestic

Ship model Eumeralla steamship with one funnel, two masts portholes in hull, set against a coastal scene with lighthouse. Ship is painted green. Model is in a wooden framed glass case. Split on background scene. Case strengthened by metal brackets at top corners and bottom front corners. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

The epergne was presented to Amelia Jane Donaldson (wife of Dr J.B. Donaldson Snr) "as a mark of esteem" by friends at the Presbyterian Church in 1907. Dr James Blair Donaldson had a medical practice in Linton from about 1889 until 1920, when his son, also named James Blair Donaldson, took it over.Silver-plate epergne for holding flowers. Epergne has a round base, and six branches radiating from a central stem. Branches each have a funnel-shaped small swirled-glass insert for holding flowers, while central stem has a matching, but larger glass vase insert.Engraved on base of epergne: "Presented to Mrs. J.B. Donaldson by her friends of the Presbyterian Church, Linton, as a mark of esteem. 26-4.07". Maker's marks stamped underneath base of epergne.amelia jane donaldson, dr james blair donaldson snr., ornaments, epergnes, vases

The subject of this photograph is the S.S.Rowilla, a passenger steam ferry built in Hobart for use in Tasmania's rivers, the Derwent and the Tamar. The photograph shows her docked at the Charles Street Wharf in Launceston. The S.S. Rowitta was built by Purdon & Featherstone, at Battery Point, Hobart (Tasmania) in 1909 from Huon Pine and Kauri planking. Her final configuration included three masts and a ship rig. S.S. Rowitta took its first voyage from Hobart to Launceston in 1909 and operated for 30 years as a passenger ferry on the Tamar and Derwent Rivers. She also served as a freighter, an army supply ship, a luxury charter ferry and a floating restaurant as well as a prawn boat at Lakes Entrance. (She has also been named “Sorrento” and “Tarkarri”.). In the very early days of Flagstaff Hill ‘Rowitta’ was purchased from Lakes Entrance by Warrnambool City Council and the Victorian State Government for $20,000. The Rowitta had a hull configuration very similar to a local boat named the SPECULANT, which played a key role in the Port of Warrnambool in the early 1900s. The Speculant was the largest ship ever registered with Warrnambool as her home port. Local owner and trader P J McGennan & Co, (Peter McGennan) used her as a freight carrier to Melbourne and timber trader between New Zealand and Victoria. She sunk at Cape Otway in 1911 on a voyage to Melbourne. In 1974 Rowitta was delivered to Port Fairy and then later sailed to Warrnambool’s Breakwater where she was lifted out of Lady Bay and loaded onto the back of a long transport truck and slowly and carefully driven along Pertobe Road, through the Surfside Caravan Park and over the railway line, into Flagstaff Hill’s Maritime Village. Transfer arrangements were coordinated by Jack Morse, of Morse Engineering, a member of the Flagstaff Hill Planning Board, and Ken Goyen, a local crane operator. The ‘Rowitta’ was originally acquired to be rebuilt to match the original SPECULANT. When finances became tight in 1976 a review of all plans ended in the decision to restore the “Rowitta” to her original configuration. She was then restored, renamed the original name of “Rowitta” and installed in the Village’s Harbour Lake to become one of the popular vessels on display for visitors to enjoy. It was the decision of the Advisory Committee to Flagstaff Hill to have Rowitta demolished in April 2015 due to extensive deterioration. Items associated with the Rowitta continue to be held in Flagstaff Hill Maritime Village’s Collection.The photograph of the passenger ferry S.S. Rowitta.is significant for its association with Tasmanian history from the early to mid-1900s. It is also connected to the history of the Rowitta, which was a large exhibit on display at Flagstaff Hill Maritime Village from the museum’s early beginnings until the vessel’s end of life 40 years later. The Rowitta represents the importance of coastal traders to transport, trade and communication along the coast of Victoria, between states, and in Australia before rail and motor vehicles. The vessel was an example of a ferry built in the early 20th century that served many different roles over its lifetime of over 100 years. Black and white photograph of the steamship S.S. Rowitta at Charles Street Wharf, Launceston. It shows the vessel docked at the Charles Street Wharf in Launceston. Smoke is coming from its funnel and there are people on board. There is a handwritten inscription on the top edge of the photograph. The vessel was built in 1909 by Purdon & Featherstone, Hobart. Blue-green handwriting on top left margin "ROWITTA AT LAUNCESTON"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, photograph, s.s. rowitta, charles street wharf,, launceston., purdon & featherstone, rowitta, tarkarri, speculant, purdon & featherstone of hobart, passenger ferry 1909, sorrento

Such items used by troops in field exercises. Known as "Choofers"Made of soldered tin plate. It has a central open column for fire of twigs and leaves, surrounded by a water jacket. Fitted with folding double wire handle. On top is a small fitted funnel to facilitate filling and a small vent hole. Traces of label adhesive on body suggest that it was made from a food can.Nilfield equipment, cooking

Also black and white copy 10 x 16.5|Also sepia toned postcard damagedBlack and white photograph showing view from New Works across lake, and Cunninghame Arm. Foreground shows two children on boardwalk, roofs of harbour masters and harbour engineers houses, and the house of the contractor John Carpenter. Smoke billowing from funnel of S S Wyralla. Lakes Entrance Victoriajetties, waterways, township, topography

Photograph related to no.P000041, P000045 - P000048 of P. S. Adelaide re-floating. Copyright held by Riverine Herald newspaper. Original and negatives held by Riverine Herald.. Photograph taken from the river looking west towards the Echuca bank. Spectators line the higher banks and to the water line in the foreground. The back of the Adelaide and funnel is in clear view with the wheelhouse being partially obscured. The re-floating of the P. S. Adelaide was a Significant community social event evident by the number of spectators in the photograph. The community had invested a great deal of time and money into re-floating the paddlesteamer. The newspaper covered the event in detail with a number of action shots as the boat made its rear entry from the soil ramp to the water.Black and white photograph of the P. S. Adelaide on a ramp being prepared for re-floating. Spectators line the higher banks. Photograph possibly taken from the river looking west towards the Echuca bank.p. s. adelaide, echuca,victoria, re-floating of the p. s. adelaide. riverine herald newspapers,

Black and white photograph of Geelong (Pengelly) 21 at the Geelong Railway Station, 21/2/1927; Tram has the destination of West. Has the funnel of a steam locomotive in the rear. The station canopy has not been built at this time. Two copies held. Photo Lee A Ratten - see related document and Reg Item 7185.On rear in pencil (very faint) - "Geelong, Car 21, Railway Station, 21/2/1927"trams, tramways, geelong, railway station, pengelly, west, tram 21

Black cast iron coffee grinder with pull out drawer for catching ground coffee, gold coloured funnel on top for beans and a handle with wooden knob for turning grinder, brass screw & name plate on front, square base with holes for securing, hand made lid possibly cut from motor oil can.T & C Clark & Co Ltd Wolver Hampton Druertons improved Clark & Co Manufacturersdomestic equipment, food preparation, kitchen, k182

This soda syphon is a device for dispensing carbonated or soda water. It was also called a Seltzer bottle. The design of soda syphons used in the 20th century was first created in the late 1830s and these bottles were especially popular in the 1920s and 30s. This Sparklets Company syphon was probably made in England but the company was manufacturing also in U.S.A. and Europe. This syphon has no known provenance but it could have been used in a hotel or a cordial factory in Warrnambool or district. This soda syphon is of interest as an example of how soft drinks were dispensed 90 to 100 years ago. It will be useful for display.This is a heavy glass bottle with a heavy base. It has a metal mesh over the bottle with a metal (or material) red band around the bottle three-quarters of the way up from the bottom. The mechanisms for filling and siphoning at the top are made of metal (these include a funnel and two handles). Attached to the top and inside the bottle is a tube for syphoning. Directions for use are printed on the lid. ‘Sparklets’ ‘Admit gas slowly and shake vigorously’ Important. Do not fill the bottle above the red line’. sparklets company, soda syphon bottle, warrnambool

RMS Queen Elizabeth that sailed primarily on the North Atlantic Ocean from 1939 to 1968 for the Cunard Line , later owned by the Queen Corpration and then the Seawise University. Queen Elizabeth was a slightly larger ship (than the Queen Mary) , the largest passenger liner ever built at that time and for 56 years thereafter. She also has the distinction of being the largest-ever riveted ship by gross tonnage. She first entered service in February 1940 as a troopship in World War II, and it was not until October 1946 that she served in her intended role as an ocean liner. With the decline in popularity of the transatlantic route, both ships were replaced by the smaller. Queen Elizabeth was sold to a succession of buyers, and finally was sold to Hong Kong businessman of the Orient Overseas line in 1970. In 1972, whilst she was undergoing refurbishment in Hong Kong harbour, fire broke out aboard under unexplained circumstances, and the ship was capsized by the water used to fight the fire.Marine artLong framed unglazed landscape format painting predominantly depicting in foreground an ocean liner painted black hull and white superstructure with two funnel stacks painted red with black trim, under full sail against a blue sky. The back of the painting is covered with brown paper in places damaged. Hanging cord missing . Remnant Brown paper backing.at lower right corner single uc word in white paint : "CV WRIGHT (artist symbol of crossed anchors) / 3 ? '71"marine painting, ocean liners, rms queen mary, royal mail ships, p & o steamships, ww2, artwork-paintings, hobbies, bosun, c.v.wright

Red & black painted tin steam locomotive. Gold trim & details painted over the top. Funnel missing. 3D driver sitting in the cabin. Door at the back of the cabin for batteries. Batteries run a small motor driving the back wheels. Jockey wheel underneath. one small and one large wheel on each side. Piston on each side Western painted on each side of the cabin toys, children, tin, locomotive, train, presents

This medical instrument was used in the Tawonga District General Hospital which was built in the 1950s specifically for the increase in population due to the Kiewa Hydro Scheme.Historical: Shows the development of scientific hospital equipment. Provenance: Used in the Tawonga District General Hospital which was remote and therefore required good equipment. In a white cardboard box 2 metal instruments. One is a pair of scissors with 'teeth' at the handle end and a bow at the instrument end when the ends meet The scissors are bent before the pivot. The other instrument is a long rod with a screw at one end that turns the other end around. This other end has a funnel that comes to a point. A holding instrument used during the operation.On box, in pencil "Mrytleford Clinic' / Pile Drivermedical instrument. hospital equipment. tawonga. mt beauty. haemorrhoid, myrtleford

It is probable that the urinal was situated in the forward part of the ship rather than the stern, being one of two placed on either side of the deck and housed immediately adjacent to the doors into for-castle, or crew sleeping quarters. The toilets on maritime vessels were (and still are) called the ‘heads’, after the sanitation arrangements common until the end of the eighteenth century. The name was given to the ‘head’ of the ship, forward of the forecastle and around the beak or bowsprit. These first lavatories were floored with grating or nets so the force of the sea could wash them clean, and they were always used on the lee or non-weather side so the effluent fell directly into the water rather than back on board. The Children wrecking: The barque Children was one of the first vessels to be lost in the Western District the vessel was wrecked to the east of Warrnambool on 14th January 1838. When it ran ashore in hurricane-force winds, 22 passengers and crew were fortunate to escape being battered to death on the rocks. The Children broke up within 20 minutes, sweeping sixteen of those on board to their deaths. After eleven days, the survivors, all of whom were injured, were rescued and taken to Portland. According to Lloyd's Shipping Register 1837-1839, the Children was built in 1825 at Liverpool and operated by owners Gordon & Co, of London. Registration number 123/1837, James Henty then bought her in 1837 as a three-masted barque of 254 tons, with a hull of “part pitch pine, felt sheathed” and “coppered in 1837” at Launceston registered number 6/1837. In 1838 the Children, under her master Captain H. Browne, completed a successful round trip from Launceston to London (carrying wool and whale oil loaded in Portland), returning in late November of that year carrying a general cargo including house bricks used for ballast. On the 11th of January 1839, the Children sailed from Launceston for Adelaide, with 24 passengers, 14 crew, and an awkward mixed cargo, including 1500 sheep, 8 bullocks, 7 horses, and farming implements, and six whaleboats with associated whaling gear. One account states that when the Children were “put out from port she was light and badly ballasted”. The vessel immediately encountered four days of hurricane-force storms, eventually clearing on the early morning of the 14th. However, it was too late to take accurate measurements of the sun or stars to establish their position relative to the coast. The Children collided with a limestone stack at the entrance of Childers Cove, and the seas smashed her into pieces within half an hour. All the cargo and 16 lives were lost including 8 children. The Henty brothers contributed £150 towards a fund for the 22 survivors at a memorial service held in Launceston later that year. It was a major financial setback for James Henty and his brothers, but one from which they recovered. In a submission to the Governor of New South Wales dated 24 March 1840, the Henty’s summarised their work over the previous six years of establishing the Portland settlement stating. “Six stations have been occupied, one at Portland Bay three at the open country about 60 miles inland called ‘Merino Downs’ They have erected two houses at Portland Bay and two others at Merino Downs”.This urinal is significant as part of the vessels original fittings he Children was delivering cargo intended for the Portland Bay settlement of her owners the James Henty brothers The wreck is also significant as one of the first vessels to have been lost in the Western District of Warrnambool. As a result the shipwreck of the Children is registered with the Victorian Heritage Register S116. A lead urinal with a rounded back at the top splash plate with an attached semi-circular receptacle or basin (20cm deep and projecting forward 30cm). At the sides are flanges with bolt holes connecting to a ship's wall. The urinal is drained by a funnel-shaped outlet also made of lead, reducing from a 10cm radius to a joined 5 cm pipe. The urinal was recovered from the wreck of the CHILDREN.Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, shipwreck artefact, the children, lead ship’s plumbing, crew urinal, the ‘heads’, ship plumbing, james henty, portland bay, urinal, ship's urinal

Black and White print contained within the Wal Jack Bendigo and Geelong Album, see Reg Item 5003 for more details. Photo of No. 27 at the Wharf terminus, with the wharf building in the background and the funnel of a steam vessel. Printed on Kodak Velox paper. i1 - scan of print in the album i2 - rear of image i3 - scan of negative at 3200dpi added 18/6/2020. On rear in ink "Geelong No. 27 Birney at wharf"trams, tramways, geelong, wharf, tram 27

A meat grinder or mincer was used for mincing or fine chopping of raw or cooked meat, fish, vegetables or similar food. It replaced tools like a mincing knife.A vintage cast iron mincer with a wooden handle attached to the long cast iron handle. It can be screwed to a table or bench, secured tightly by a two pronged claws. It has a funnel at the top for the meat to be pushed into the mechanism which when the handle is turned operates the inner mechanism which forces the minced meat out through a side opening. The cast iron handle is curved.'2 UNIVERSAL' is stamped on the front of the mincer. Stamped on the front side of the handle - ' L. F&C. NEW BRITAIN. CONN.U.S.A.' On the inside of the cast iron handle is stamped - 'PATENT 12 1897. PAT.MAY 15.1909. 4.18. 1899. D.R.ENG 10'...... and several other numbers which are hard to decipher.domestic objects, kitchen equipment, cooking equipment, meat grinders, meat mincers

A meat grinder or mincer was used for mincing or fine chopping of raw or cooked meat, fish, vegetables or similar food. It replaced tools like a mincing knife.A vintage cast iron mincer with a wooden handle attached to the long cast iron handle. It can be screwed to a table or bench, secured tightly by a two pronged claws. It has a funnel at the top for the meat to be pushed into the mechanism which when the handle is turned operates the inner mechanism which forces the minced meat out through a side opening. The cast iron handle is curved.British Made National. 25domestic objects, kitchen equipment, cooking equipment, meat grinders, meat mincers

This iron was used by women, in their domestic role, to press the clothes from the mid 19th century. Coal embers were put inside, heating the base of the iron, to press the family's clothes and linen. Small bellows were used to fire up the embers to keep the iron hot. In the Kiewa Valley the embers would have been from the local hard wood growing on the farms.Ron White worked for the SEC on the Kiewa Hydro Electric Scheme. The iron belonged to his mother. Ron remembers being a boy of approximately 8 years of age, watching his mother do her ironing with this charcoal iron in the c1920s.This iron is made of cast iron. It has a hinged lid so that coal embers can be put inside for heat. The lid has a curved funnel. Bellows are used to blow air into the iron and keep the coals burning. It has a wooden handle and a lever (also with a wooden handle) to open the lid. There is a 2 and a half centimetre hole at the back of the iron to check the coals. The hole has a swivel cover.There is an embossed "S" on the swivel cover.iron, laudry, household, charcoal, antique, domestic, pressing clothes

This bean slicer is one of the household labour-saving devices that became increasingly popular in the early to mid 20th century. In those times vegetables such as beans were often grown in the backyard of a house or farm and bean-cutting was a laborious task, especially when providing for a large family. Processed sliced beans were not then freely available.This bean slicer has no known local provenance but is retained as an interesting example of a 20th century household labour-saving device. This is a metal object with a round disc with three metal blades underneath on a turntable for slicing. The blades are attached by six screws. There are two funnels on the top of the disc for inserting the beans. A handle that turns the blades is attached by a screw to the round disc. Attached to the disc also is a vice that enables the slicer to be bolted to a bench or table. The slicer has been painted green but the paint is wearing off and the whole object is rustywarrnambool, bean slicer, household items

This Gear box universal, with its Cone assembly ( inc lens) in conjunction with Magazine 500 exposures unit ( see CAT 5561) is part of the F22 aerial camera assembly. As an assembly, the type F22 aerial camera came into RAF and RAAF service c1942. It was used by the RAF over Europe and by the RAAF extensively through the Sth. West Pacific area of operations, during WW2. This type of camera was used through the Vietnam war up to the early 1980's. The F22 camera assembly when mounted in the reliable Canberra aircraft, did aerial survey work in PNG, Indonesia, Malaysia and Sumatra and the Australian mainland. This type of camera was used in Spitfires, Mosquitos, Avro Lincolns and Canberra aircraft.Heavy, metal construction. The base is a rectangular box shape and mounted to that is a funnel shaped tube. Inside the tube are numerous small baffles around the sides painted matte black. The box has a 7 pin electrical connector. The box section can be opened by releasing catches. It has a timber base. Near the mouth of the tube, outside, is a panel with a slot and indentations F5.6 F8 F11 F16.There is a tape label near mouth if tube with writing embossed "LENS S/NO 2767849" The box has a label "GEARBOX/UNIVERSAL. MODEL 14A/4249 SERIAL No. 1685"aviation, reconnaisance, camera, photography

A meat grinder or mincer was used for mincing or fine chopping of raw or cooked meat, fish, vegetables or similar food. It replaced tools like a mincing knife.A vintage cast iron mincer with a brown wooden handle attached to the long cast iron handle. It can be screwed to a table or bench, secured tightly by a two pronged claws. It has a funnel at the top for the meat to be pushed into the mechanism which when the handle is turned operates the inner mechanism which forces the minced meat out through a side opening. The cast iron handle is curved.'No 3 Scandia'domestic objects, kitchen equipment, cooking equipment, meat grinders, meat mincers

Painting is mounted with light blue border in a brown wooden frame with glass front, cream paper backing & a wire hanging strap. Water colour painting of a warship at sea. The ship is grey with 4 twin main gun turrets. It also holds an Albatross Aircraft, 2 funnels & 2 wireless masts. The painted sky shows patchy clouds, the sea is a blue green colour with small white waves. HMAS Perth Artist Ray Parkin 1948hmas perth, ww2, ran, paintings

RMS Queen Mary a retired ocean liner by 1971 that sailed primarily on the North Atlantic Ocean from 1936 to 1967 for the Cunard Line (known as Cunard-White Star Line when the vessel entered service ( Wikipedia) Maritime ArtLong framed unglazed landscape format painting predominantly depicting in foreground an ocean liner painted black hull and white superstructure with three funnel stacks painted red with black trim, under full sail against a blue sky. The back of the painting is covered with brown paper in places damaged. Hangs on a cotton cord threaded between two screw in eyelet hooks. Brown paper backingat lower right corner single uc word in white paint : "CV WRIGHT (artist symbol of crossed anchors) / 3 ? '71"marine painting, ocean liners, rms queen mary, royal mail ships, p & o steamships, ww2, artwork-paintings, hobbies, bosun, c.v. wright

A meat grinder or mincer was used for mincing or fine chopping of raw or cooked meat, fish, vegetables or similar food. It replaced tools like a mincing knife.A small vintage cast iron mincer with a wooden handle attached to the long cast iron handle. It can be screwed to a table or bench, secured tightly by a two pronged claws. It has a white enamel coated funnel at the top for the meat to be pushed into the mechanism which when the handle is turned operates the inner mechanism which forces the minced meat out through a side opening. The cast iron handle is curved.'Loveload London 1'domestic objects, kitchen equipment, cooking equipment, meat grinders, meat mincers

A meat grinder or mincer was used for mincing or fine chopping of raw or cooked meat, fish, vegetables or similar food. It replaced tools like a mincing knife.A cast iron mincer with a wooden handle attached to the long cast iron handle. It can be screwed to a table or bench, secured tightly by a two pronged claws. It has a funnel at the top for the meat to be pushed into the mechanism which when the handle is turned operates the inner mechanism which forces the minced meat out through a side opening. The cast iron handle is curved. There are three mincing attachments tied with string.'UNIVERSAL' is stamped on the top of the mincer. Stamped on the front side of the handle - ' L.P. F&C. NEW BRITAIN. CONN.U.S.A.' On the inside of the cast iron handle is stamped - 'PATENT 10.2.1897. PATENT.MAY 15.1900. 4.18. 1890...... and several other numbers which are difficult to decipher.domestic objects, kitchen equipment, cooking equipment, meat grinders, meat mincers

Photograph (proof 72) Shows a Tornado Funnel stretching from very dark clouds to the ground. A white wooden fence stands out in the foreground. Original is in an oval frame. Underneath the photo is written : Australian Tornado at Marong, Loss if life and destruction of property, Sept, 27th 1911, photo taken by C. Hosken, 3 miles distant, Bolton Bros. print. At the side of the photo, written in biro is: same sized negative.C. Hoskentopic, weather, tornado, tornado0 at marong, c. hosken