Digital image - set of two - of the Newton Williams and Darryl Hawksworth motorised cable tram set operating in Wendouree Parade during the 1987 March Begonia Festival. .1 - grip car running around the trailer in the loop. .2 - grip car and trailer 171 in the loop with tram 40 behind.trams, tramways, btps, cable trams, begonia festival, gardens loop, wendouree parade, tram 40, tram 171

Chains were used to prevent vehicles from slipping on the terrain. They were fitted onto the driving wheels for extra grip.Used on large vehicles during the construction of the Kiewa Hydro Electric Scheme when the terrain was slippery eg. mud, snowIron chains connected to form rectangles with extended links at each end with clips. Used to fit on the driving wheels of large vehicles eg. bus, tractor, snow vehicle.heavy vehicles, construction vehicles, snow chains

Lusterware is a type of pottery or porcelain with a metallic glaze that gives the effect of iridescence. The technique on pottery was first developed in Mesopotamia (modern Iraq) in the early 9th century. It is produced by metallic oxides in an overglaze finish, which is given a second firing at a lower temperature in a "muffle kiln", or a reduction kiln, excluding oxygen. The Lusterware effect is a final coating applied over the ceramic glaze, and fixed by a light second firing, applying small amounts of metallic compounds (generally of silver or copper) mixed with something to make it paintable (clay or ochre). This is then fired in a reducing atmosphere at a temperature high enough to "soften" the glaze from the first firing, and break down the metallic compounds, leaving a very thin ("perhaps 10 or 20 atoms thick") layer that is fused with the main glaze, but is mainly metal. Lusterware normally only uses one colour per piece, and the range is limited a "gold" derived from silver compounds was historically the most common. The process has always been expensive and rather unpredictable, always requiring two firings, and often the use of expensive materials such as silver and platinum. The very thin layer of luster is often delicate, and many types of Lusterware are easily damaged by scratching removing the metallic layer, or by contact with acids. Lusterware has therefore always been for display and occasional use, although by the 19th century it could be relatively cheap. Many pieces show the luster effect only working correctly on parts of the surface, or not at all. An item probably made in Staffordshire UK where this type of pottery was popular in the late 19th century by unknown pottery as the subject item has no marks. The teapot at this time cannot be associated with a historical event, person, or place, provenance regards manufacture is unknown, item assessed as a collection asset given it was produced before 1950.Teapot ceramic ornate copper lusterware abstract floral design handle has a protruding sculptured bird for thumb grip. Nonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, teapot, tea set, kitchen ware, ceramic, lusterware, pottery, staffordshire uk, pottery finishes

A cap liner is an item that helps to seal the contents in a container to avoid leakage and spoiling. This cap liner was recovered from the Falls of Halladale shipwreck. The Falls of Halladale was an iron-hulled, four-masted barque, used as a bulk carrier of general cargo. She left New York in August 1908 bound for Melbourne and Sydney. In her hold was general cargo consisting of roofing tiles, barbed wire, stoves, oil, and benzene as well as many other manufactured items. After three months at sea and close to her destination, a navigational error caused the Falls of Halladale to be wrecked on a reef off the Peterborough headland on the 15th of November, 1908. The captain and 29 crew members survived, but her cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. The Court of Marine Inquiry in Melbourne ruled that the foundering of the ship was entirely due to Captain David Wood Thomson's navigational error, not too technical failure of the Clyde-built ship. The Falls of Halladale was built in1886 by Russell & Co., at Greenock shipyards on the River Clyde, Scotland for Wright, Breakenridge & Co of Glasgow. She was one of several designs of the Falls Line of ships named after waterfalls in Scotland. The company had been founded between 1870- 1873 as a partnership between Joseph Russell, Anderson Rodger, and William Todd Lithgow. During the period 1882-92 Russell & Co. standardised designs, which sped up their building process so much that they were able to build 271 ships during that time. The Falls of Halladale had a sturdy construction built to carry maximum cargo and was able to maintain full sail in heavy gales, one of the last of the 'windjammers' that sailed the Trade Route. She and her sister ship, the Falls of Garry, were the first ships in the world to include fore and aft lifting bridges. Previous to this, heavily loaded vessels could have heavy seas break along the full length of the deck, causing serious injury or even death to those on deck. The new raised catwalk-type decking allowed the crew to move above the deck in stormy conditions. The Falls of Halladale shipwreck is listed on the Victorian Heritage Register (No. S255). She was one of the last ships to sail the Trade Routes. She is one of the first vessels to have fore and aft lifting bridges. She is an example of the remains of an International Cargo Ship and also represents aspects of Victoria’s shipping industry. The wreck is protected as a Historic Shipwreck under the Commonwealth Historic Shipwrecks Act (1976).Glass cap liner, moulded disc with indented ring and finger grip on the top. Recovered from Falls of Halladale wreck. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, falls of halladale, cap liner, russell & co., glass liner, glass seal

Metal cartwheel spanner, hexagonal grip on on end. Black forged metal. This item was formerly stored at Eaglehawk Heritage Society.transport, horse, cartwheel spanner

The first prototype of the Owen Gun was first developed by Evelyn Owen in 1931 and finalised the design in 1938. The Owen was the only entirely Australian - designed and constructed service sub-machine gun of World War11 and was used by Australian Army from 1942 until 1971. It was manufactured at Lysaght's works who built 45,000 units. The cartridge was the 9x19 Parabellum - fired 700 rounds per minute and had an effective range of 125 yards.The Owen was of significant advantage to the Australian Army in the jungles of Vietnam.Owen Gun - sub-machine gun also known as the (Owen machine carbine). Steel body and timber grip and butt.WFM 0067 on top of barrel.

This pattern bayonet which affixed to a .303 Lee Enfield rifle was standard issue to Australian forces in World War 1 (1914-1918), World War 2 (1939-1945) and the Korean War (1950-1953). Leather bayonet frog might indicate WWI light horse issue.Part of a collection of edged weapons relevant to Victorian Colonial and Australian Military forces.British pattern 1907 bayonet, blade 430 mm long with wood hand grip and leather scabbard and leather frog.Blade " 7. 17 Wilkinson" Frog " Dexxil Don 1917"military, bayonet, world war one, world war two, korea, light horse

A Biosports Inc. 'Gripper' racquet. Curved shape handle. Materials: Metal composite, Plastic, Adhesive tape, Nylon, Leathertennis

A white Wilson racquet with purple grip tape and no model markings. Materials: Graphite, Plastic, Nylon, Adhesive tape, Rubbertennis

A Paramount metal racquet with leather grip wrap branded with 'FAIRWAY BY BALMFORTH'. Materials: Metal, Leather, Adhesive tape, Nylontennis

Used by riders for the control of horses, and by cart drivers Ca1900 As manufactured and sold by Holden and Frost Ca 1900Tapered shaft, cotton wrapped 400mm with leather wrapped hand grip and 60mm long leathern loop at other endequine, crop

Photograph of No. 560 and grip turning from Gertrude St into Nicholson St, May 1940. In the background is the Winding house and associated chimney.Yields information about the Nicholson and Gertrude St cable trams and the associated engine or power house.Negative of a photograph. Print also held.Written on the back of the album print "Cable tram No. 560 from Northcote at junction of Nicholson & Gertrude Sts, passing power house May 1940"trams, tramways, cable trams, nicholson st, gertrude st, winding houses, tram 560

Carl Rudolph Braun (1823-1891) was the inventor of this instrument, as well as a type of decapitation hook. Braun was born and practiced in Austria, and followed Semmelweis as assistant to Klein at the Vienna Maternity Clinic in 1847, before becoming its head in 1856. Braud added a gynaecology section to the clinic in 1858, being convinced that obstetrics and gynaecology should be together. (Source: Baskett, Thomas. 'On the Shoulders of Giants: Eponyms and Names in Obstetrics and Gynaecology'). This device was included with a range of other obstetric instruments, mostly destructive instruments, given to RANZCOG from Box Hill Hospital labour ward in February- March 1998. The maternity service at Box Hill Hospital combined with St George's hospital in Kew to be known as Birralee Maternity Service. These instruments were collected by Julie Collette, Unit Manager, St George's Kew and given to RANZCOG Museum Curator, Susan Barnett.Craniotomy forceps, Braun's. Stainless steel forceps, with wingnut. Upper blade has open oval section and ridged grip section on the handle. Lower blade has serrated inner edge and ridged grip section on the handle. Wingnut is used for attaching the upper and lower blades of the forceps. Inscribed "B.H.H.L Ward" on forceps."B.H.H.L Ward"destructive instruments

A Spalding 'Top-Flite' tennis racquet, with: brown/black with gold, perforated leather handle grip; clear nylon netting; ribbon whipping around shoulders; original plastic handle grip cover. Materials: Wood, Adhesive tape, Leather, Paint, Ink, Ribbon, Vinyl, Lacquer, Glue, Metal, Plastic, Nylontennis

The tennis racquet belonged to John Phillips who used it in the late 1950s / early 1960s. It was not a new racquet when Ihe started using it, but a pass-me-down from his father. He purchased his first new racquet in the mid 60s and gave this racquet to the Orbost Museum to go in the racquet press so that people would have an idea of what the item (press) was used for - to stop wooden framed racquets with gut strings from warping. John played tennis at Orbost Tennis Club from 1969-1981 - vice president 1971-77, president 1977-81, secretary of Orbost & District Tennis Association 1975-81. He is a Life Member of the Orbost Tennis Club (1980). John is also a Life Member of the Orbost & District Historical Society.This item is an example of an early piece of sports' equipment which was manufactured using different materials.A wooden tennis racquet with a reinforced cane handle. The handle has a black leather grip. The frame is wooden ash with gut strings.ALL ENGLAND Genuine Weather Proof SLAZENGER Reinforced Cane Sealed finishtennis-raquet sport recreation phillips-john orbost-tennis-club

This device was invented in 1828 and became the standard tool for removing tonsils. The object is significant because it served as an early model in tonsil removal. However, by the 20th century surgeons used a scalpel and forceps instead as the guillotine often caused heavy bleeding and left parts of the tonsil behind.Luer's tonsil guillotine, in the "French" pattern, has a sliding and positioning fork, sliding loop-blade, finger-ring grips and plunger.Medical Supply Depotmedical instrument, luer, tonsils, tonsillectomy

This carpenter's clamp would have been used in confined spaces where a full turn of the brace cannot be achieved. It is fitted with a pawl mechanism - a hinged or pivoted device adapted to fit into a notch of a ratchet wheel to impart forward motion or prevent backward motion. This item would have been used on a rural property in constructing or maintaining infrastructure.This item is an example of a woodworking tool used in the first half of the 20th century prior to the widespread use of power tools.A metal ratchet brace with a wooden handle grip. It has a hinged mechanism device which fits into the notches of the ratchet wheel - a pawl.woodwork tools brace-ratchet

This carpenter's clamp would have been used in confined spaces where a full turn of the brace cannot be achieved. It is fitted with a pawl mechanism - a hinged or pivoted device adapted to fit into a notch of a ratchet wheel to impart forward motion or prevent backward motion. This item would have been used on a rural property in constructing or maintaining infrastructure. This item is an example of a woodworking tool used in the first half of the 20th century prior to the widespread use of power tools. A metal ratchet brace with a wooden handle grip. It has a hinged mechanism device which fits into the notches of the ratchet wheel - a pawl

String Basket with folding metal frame. Has metal handle with hand grip. Section has been repaired with shoe lace.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, string basket

This Victorian era china cup with gilded gold writing and decoration, along with the words " A Present", may have been given as a gift or, because of its small size, been a replica coffee cup for a child to play with.743.1 - Small white china cup, cylinder-shaped, gilded and glazed, with forefinger and thumb grip handle. Gilt decoration and lettering.Gilt Lettering in gold colour- "A Present" on front of coffee cup.cup, miniature, coffee, present, china, white, children, gift, gilding, handle, christening, victorian, font, printing, collectables, gold lettering

Most likely from Dr Frank Forster's collectionConquest forceps, with mahagonay handle inserts with cross-hatch grip pattern.Manufacturers stamp, inside handle, "ARNOLD LONDON" c1820 on label.forceps, conquest

A laryngoscope is an instrument used to view the larynx (voice box), which is the opening to the trachea and lungs. It consists of a “blade,” which goes into the patient’s mouth, and a handle. Prior to 1943 when Macintosh introduced his curved blade, most laryngoscope blades were long and straight. The straight blades were used to directly hold the epiglottis. Macintosh’s curved blade works differently: it indirectly opens the epiglottis by applying pressure to a space between the root of the tongue and epiglottis, called the vallecula. The flange running along the left lower edge of Macintosh’s blade was also a novel innovation. It was designed to move the tongue to the side, which improved the view of the larynx and made more room for a breathing tube. The Macintosh Laryngoscope remains one of the most popular blades worldwide. (Source: Wood Library Museum) This laryngoscope was previously owned by John Mainland, as evidenced by the name etched into the handle. Mainland graduated from the University of Melbourne in 1950 with a Bachelor of Science degree. After researching and completing his medical degree, Mainland entered into the field of anaesthetics, training at the Royal Women's and Royal Children's Hospitals, later Alfred Hospital, in 1959. He completed training in 1964 and remained at the Alfred Hospital. During his career, he also became the first anaesthetist appointed to the position of Professor in Victoria. His other achievements include manufacturing a respiratory monitoring module that accompanied astronauts on the United States moon landing and developing a stimulator to lessen the risk of deep vein thrombosis in surgical patients. Mainland became a Fellow of the Australian and New Zealand College of Anaesthetists in 1992, retiring from the profession in 1997.Oblong shaped handle with textured grip. Attached is a laryngoscope blade in a cruved shaped with light tube running through one side.Etched into top of handle: J.F. MAINLAND •Stamped into top of handle: REGD TRADE MARK / PENLON / MADE IN ENGLAND •Stamped into base of handle: CLOSE [arrow] •Etched into base of blade: MAC / 4 •Stamped into side of blade: REGD TRADE MARK / PENLON / MADE IN ENGLAND •Stamped into side of blade: STAINLESSmacintosh, robert reynolds, new zealand, laryngoscope, mainland, john, alfred hospital, moon landing

1950s approximately and used in Ringwood North for many years.Hand lawnmower with white handle and black hand grips."Qualcast" brand made in England and has green wheels with black rubber."Qualcast" made in England.lawnmower, 1950's, qualcast

A Rox Pro Space T1 racquet. Non-original grip covering. Materials: Metal, Plastic, Adhesive tape, Adhesive labeltennis

A Fleetwood 'Professional' model with non-original grey Wilson grip tape. Materials: Wood, String, Adhesive tape, Paint, Nylontennis

Used by donor's father in Australia.Carpenter's/wood worker's plane - wooden hand grip & wooden knob; screw for adjusting metal blade, metal base plate.'STANLEY' embossed on metal front plate /'BAILEY', No. 4 1/2 on base plate.carpentry, stanley works, woodwork

A lot of safety cages were developed in 1800s. Grippers on the cages acted to prevent the cages from "free fall" when the cables broke.Model of mining cage, metal construction, with safety cage not in working order.bendigo, gold mining, mining cage model

A lot of safety cages were developed in 1800s. Grippers on the cages acted to prevent the cages from "free fall" when the cables broke.Model of mining cage, metal construction, with safety cage in working order with ore truck. Made by Benedict Branch, won a medal at the Juvenile Tasmanian Industrial Exhibition (1883)bendigo, gold mining, mining cage model

The shin gunto was used by non-commissioned officers the design resembled the officer's shin gunto but were a cheaper quality.These swords are originals of their time and would have belonged to non-commissioned officers.2 x Gunto Japanese Swords, both swords have a curved steel blade, one sword has a metal scabbard, one has a leather scabbard. One sword has a brown tassle indicating the rank of sergeant and three cherry blossoms on the grip, one has three cherry blossoms on the grip however the tassle is missing.The blade of the sword with the metal scabbard has the number - 101657.japanese, sword, non-commissioned officers

A Spalding 'Top-Flite' tennis racquet, with: original gut netting, and red support strings; black with gold, perforated leather handle grip; ribbon whipping around shoulders; and original plastic handle grip packaging. Materials: Wood, Gut, Adhesive tape, Leather, Paint, Ink, Ribbon, Vinyl, Lacquer, Glue, Metal, Plastic, Stringtennis