This photograph shows the interior of a library, including a person looking at the shelvesBlack and white photograph showing the interior of a library with tall bookshelves. A person stands in front of the shelves to the right of the photograph, facing away from the camera and towards the books. A band of high windows looks out onto the sky and the roof of a building next door. Printed in grey ink:| 526B / 15.11.73library, libraries

This hat is part of a Disruptive Pattern Combat Uniform issued by the Australian Airforce to Bernard Farley during service. This uniform type was used in base and field activities and was replaced in 2014 by the General Purpose Uniform as the uniform worn during general base duties and in non-warlike environments.This item has social significance, as an item of uniform worn by Warrnambool RSL community member and Secretary (2019), Bernard Farley during service with the Australian Airforce. The item is a representative example of previously standard issue Airforce uniform and is in excellent condition. As a set, the uniform has aesthetic significance in it’s design, incorporating the Disruptive Pattern style of camouflage which has its roots in the 1980s and continues to be adapted into uniform design by the Defence Force.Disruptive Pattern Combat Uniform hat in five colours of green and brown in camouflage pattern. Broad brim hat with black plastic cord end fastener on a beige/brown cotton cord. A band, sewn at 35mm intervals around the crown of the hat may have been used for attachments. Cotton tag on interior of hat lining with illegible inscriptions. Hat lining at front brow and on crown of head is a towel-like material, presumably for absorbing perspiration.The name “FARLEY” can be faintly seen handwritten on the hat on both the left and right interior.camouflage, uniform, general purpose uniform, airforce, australian defence force, disruptive pattern

This photograph shows the interior of a library with desks available for use.Black and white photograph showing the interior of a library. Shelves full of books sit below a window and raise up into a corner. There is a small desk and chair against another window behind a perpendicular shelf filled with books. The corner of a desk can be seen in the right foreground of the photograph. Printed in grey ink: | 526B / 15.11.73library, libraries

Brown leather cylindrical shaped gaiter with two leather straps for fastening. One strap is attached to the lower edge of the interior with a metal pin. This crosses over the lower exterior and passes through a leather loop at the front. The strap then wraps around the gaiter and passes through a second leather loop at the front. This strap appears to pass through a buckle at the top of the gaiter. Another strap is passed through multiple rectangular cut out holes and secures to a second buckle.The edges of the gaiter are unfinished and all elements are affixed through metal pins rather than stitching.Stamped in black ink on interior is the word "WONDER" alongside other illegible markings.legging, gaiter, first world war

Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘70 in Osaka and travelled to Osaka several times in 1969-1970. Boyd designed the innovative Space Tube, which had over 25 exhibition boxes, projecting from it. Amongst the topics covered were Australian scientific innovation (including brain research, immunology, Antarctic research, Snowy Mountains Hydro-Electric Power Scheme, rainmaking, and the night sky), Australian sport, house interiors, car manufacturing, Australian music and art, and Japanese-Australian relations.Colour slide in a mount. Interior of Soviet Union Pavilion, Expo '70, Osaka, JapanMade in Australia / 13 / MAY 70M3expo 70, osaka, robin boyd, slide, russian pavilion

Long khaki coloured heavy coat. Thick, sharp angled collars. Right collar has a hook and eye attached in the lapel split. Collar has zig zag stitching and two plastic buttons on each the left and right sides. Each shoulder has a lapel that is fastened with a plastic button. The coat is double breasted. Three buttons on the right side, held in place by metal loops on the interior rather than stiches; mirrored on the left side. Left interior has oval shaped fabric buttoned to the interior with two brown (possibly bakelite) buttons. A larger brown button sits atop the smaller as a means of closing the jacket from the inside. There are two pockets on the front that are angled with the highest point near the centre and the lowest point near the hips. The arms, underarm and upper back section contains an inside khaki coloured lining of thinner, most likely cotton fabric. Above this there is a thin strip of fabric attached at either short end to use for hanging the coat on a hook. At the back of the coat there is a single pleat stretching from the base of the neck to the base of the coat. Approximately half way down the pleat there is a split in the fabric that is fastened with two plastic buttons. At the waist there are two fabric flaps that fasten together at the back with three buttons, also held in place with metal loops on the reverse.Label on interior back lining reads "REGIMENTAL No./NAME" Label on interior of the right "GREATCOATS. G.S. 1946 Patt/SIZE 1/HEIGHT 5'3"/CHEST 34"-36"/BRADLEY'S INDUSTRIES N.S.W./1951" Handwritten on label, "M J Davis"post war, army uniform, great coat, inter war, uniform, military uniform, wool, greatcoats, bradley's industries

Shows the interior of the cable tram engine house that was located on the corner of Gertrude Street and Nicholson Street in Fitzroy. Shows the steam pipes to two of the engine cylinders, the control equipment, and large cable winding wheels. An MMTB poster titled Melbourne Tramways Past and President (see Reg Item 6368), captions the photo as "Nicholson Sreet Power House - the last to operate" The facility ceased operation in 1940 though the equipment was retained until 1941. Yields information about the interior of the Gertrude Street or Nicholson Street cable tram engine houseBlack and white photograph - interior of the Engine house on the corner of Gertrude and Nicholson Streets prior to closure in 1940.tramways, trams, coburg, cable cars, engine house, nicholson street, gertrude street, steam engines

This photograph shows the interior of a libraryBlack and white photograph showing the interior of a library. A desk with piles of books on it appears in the right-hand foreground, whilst two large shelves filled with books stand perpendicular to one another in the background. A curtain hangs from the ceiling between the two shelves. Two narrow benches with a pile of books on each stand in the middle of the room.Printed in grey ink: | 526B / 15.11.73library, libraries

Photograph shows the interior of a library with a presumed staff member on the telephone behind the circulation deskBlack and white photograph showing the interior of a library. A large desk is in the foreground, covered in stationery items and a phone, and with a woman holding a telephone receiver to her ear is standing on the inside of the desk. There are books located on the shelves behind the desk. Fluorescent lights appear at intervals on the ceiling.Printed in grey ink: | 526B Printed in grey ink: 15.11.73library, libraries, staff

Government House, Melbourne was constructed between 1972 and 1876 to a design of William Wardell. The interiors including the ballroom were created soon after the building's opening. The Victorian Heritage Register citation notes that the extravagant single storey State Ballroom occupies the entire south wing. The slide is significant as it represents the decoration of the State Ball Room in 1979.One of six colour transparencies, purchased from John T Collins of interior and exterior views of Government House, Melbourne. This photograph (slide) is of the State Ballroom."South Yarra Government House Ballroom J Collins 17-10-79"government house -- melbourne, victorian interiors, ballrooms -- melbourne (vic.), john t collins

Donated by Max Turner of Yarrambat, a former resident of Rutherglen. This photograph is of the interior of E.G. Turner's Murray Hardware - Main Street, Rutherglen 1939. The business was established by Mr. George Audley in 1863 & was purchased by Mr Ernest James Turner in 1923. In the photograph is Mrs Freda Turner & younger son Max.Large unframed, black & white reproduced photograph of interior of E.J. Turner's Hardware store circa 1939. Turner's wife and younger son pictured.turner family, turner's hardware, george audley, ernest james turner, max turner, freda turner, shops

Royal Australian Navy officer's peaked cap with a woven dark navy band and off-white piqued top in synthetic material. Patent leather peak is black with green underside. The cap has a black patent leather chin strap that runs across the top of the peak, secured on left and right with press stud buttons. Above the peak is an embroidered insignia of the Royal Australian Navy, a crown with an anchor underneath. Hat brim is stiffened by foam and bears a brown leather band with punched holes, presumably for ventilation. The interior lining is black.Interior tag at back of hat reads "59". Inscription on underside of hat peak is illegible.royal australian navy, navy, hat, cap, uniform

Long sleeve khaki coloured shirt with two button down breast pockets, two plain khaki epaulettes on either shoulder fastened with a brown coloured plastic button. Six buttons fasten the shirt down the centre front. Patch on left and right shoulders depicts three downward pointing chevrons in brown and white embroidery thread. Sleeves are fastened with two plastic buttons on each arm. Manufacturer's label on interior back of neck.Manufacturer's label on interior back of neck reads "CLASS-8405/66-027-2495/ARMY No/NAME"dress uniform, australian defence force, shirt

Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘70 in Osaka and travelled to Osaka several times in 1969-1970. Boyd designed the innovative Space Tube, which had over 25 exhibition boxes, projecting from it. Amongst the topics covered were Australian scientific innovation (including brain research, immunology, Antarctic research, Snowy Mountains Hydro-Electric Power Scheme, rainmaking, and the night sky), Australian sport, house interiors, car manufacturing, Australian music and art, and Japanese-Australian relations.Colour slide in a mount. Interior, Takara Beautilion, Expo '70, Osaka, Japan. (Architect: Kisho Kurakawa.)Made in Australia / 34 / MAY 70M3 / 43 (Handwritten)expo 70, osaka, robin boyd, slide

Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘70 in Osaka and travelled to Osaka several times in 1969-1970. Boyd designed the innovative Space Tube, which had over 25 exhibition boxes, projecting from it. Amongst the topics covered were Australian scientific innovation (including brain research, immunology, Antarctic research, Snowy Mountains Hydro-Electric Power Scheme, rainmaking, and the night sky), Australian sport, house interiors, car manufacturing, Australian music and art, and Japanese-Australian relations.Colour slide in a mount. Interior, Takara Beautilion, Expo '70, Osaka, Japan. (Architect: Kisho Kurakawa.)Made in Australia / 36 / MAY 70M3expo 70, osaka, robin boyd, slide

Government House, Melbourne was constructed between 1972 and 1876 to a design of William Wardell. The interiors including the ballroom were created soon after the building's opening. The Victorian Heritage Register citation notes that the extravagant single storey State Ballroom occupies the entire south wing. The slide is significant as it represents the decoration and furnishings of the State Ball Room in 1979.One of six colour transparencies, purchased from John T Collins of interior and exterior views of Government House, Melbourne. This photograph (slide) is of the entrance to the State Ballroom."South Yarra Government House Ballroom J Collins 17-10-79"government house -- melbourne, victorian interiors, ballrooms -- melbourne (vic.), john t collins

Amatuer photogrph, Carousel entrance on left, the backs of a group milling on right, Luna Park, St Kildablack and white photograph, unmounted, fair condition, originalLuna Park - interior

This mask would have presumably been manufactred and used as a gas mask during World War One conflicts. It is presumably British made. It could also possibly date to the World War Two era.This item is a piece of protective equipment which presumably dates to the World War One era. As a surviving artefact from the Great War, this item holds historic value.Gas mask with rubberised light brown fabric face cover, plastic goggles for seeing, straps for fastening and a nozzle to attach to a canister. The canister is now missing. The goggles have corroded steel rings around themwhich protrude sloghtly from the mask. The light brown fabric covered rubber nozzle is attached to a black metallic component, which is attached to the mask with a circle of black rubber in between the metal and the mask. There is also another short piece of rubber attached to this black metallic component which is folded and positined between the nozzle and the mask. There is an inscription On the exterior of the mask, where the nose would ordinarilly be positioned. There is also an inscription in the interior on an almost full circular piece of fabric which is stitched into the same posion. This has a circle of metal stitched beneath it, which protrudes in two sections towards the wearers face. On the ends of the protruded sections are square pads of fabric, which are presumably there to position on either side of the wearers nose. The mask has a reinforces rubberised fabric rim where it would be incontact with the face. The main rubber nozzle protrudes through the inside of the mask, forming a mouth piece. There are four black straps and one light brown colour strap stitched to the exterior rim of the mask. Two of the black straps are severed.On the exterior at the nose: 3 On the interior at the nose: 22 109gas mask, mask, world war one, first world war, world war 1, ww1, wwi, the great war

The photograph shows the interior of either VR tram 52, 53 or 54. The note on the rear of the photograph referencing tram 41 is incorrect. This photograph was taken from one end of the drop-centre looking through drop-centre to the other saloon. In the foreground the tops of the timber traverse seating can be seen along with the lined ceiling, curved light shades, strap handles for standing passengers and open sliding doors. In the saloon longitudinal upholstered seating can be seen that was a feature of these cars between 1946 and 1959. The rear of the driver's compartment door and clear glass either side of it can also be seen.Yields information about VR trams 52, 53 and 54 interior layoutBlack and white photograph with notes on the rear.In pencil on the rear "Interior of Tram No 41 [sic] Built during 1939-45 war. RS 875""vr tram, saloon, drop-centre, slatted floor, longitudinal seats, traverse seats, tram 51, tram 52, tram 53

This uniform belonged to Sapper Hughes 3795948 of the Royal Australian Engineers Corps. By the date on the uniform, it is assumed that he served C 1968.This uniform has significance as an example of a uniform worn by soldier ranks for daily work and dress parades.Khaki coloured long trousers with attached suspenders. They have a button up front (5 brown plastic buttons). There are two pockets on either side of the trousers and one button up pocket on the back right with a flap that is fastened with a single brown plastic button. There are three extra brown plastic buttons on the back exterior of the waistband and six belt loops on the whole length of the waist band. The interior pocket fabric is more light weight and a slightly more green in colour. The interior of the right back pocket includes a white patch of fabric with printed inscriptions and further inscriptions written in black ink just above. The suspenders are composed mostly of blue, grey, beige, black and cream striped thick fabric. There are also silver coloured metallic components (which include inscriptions) and leather sections, most of which have a reddish/brown coating on the exterior and a white coating on the interior. One leather component has inscriptions in black ink on the interior as opposed to a white coating. The suspenders are attached to the trousers by six brown plastic buttons on the interior of the waistband. Back pocket interior inscriptions on the green fabric: HUGHES / 3795948 Back pockket interior inscriptions on the white fabric: E.W. P/LTD. / SOUTH AUSTRALIA / 1968 / (a symbol of a broad arrow) / Class 8405-66-025-6405 / Batch 67 / Mill / Size and Waist 28C / Matching Jacket 35 /36C / DRY CLEAN ONLY / CREASES SET BY SIROSET / REPRESS ON ORIGINAL CREASES / MENDING PATCH ATTACHED / NAME HUGHES. J.W. / ARMY No. 3795948 8PL Bcoj Identical metallic clip inscriptions on two of the suspenders: POLICE / (embossed image of a police baton)royal australian engineers, warrnambool rsl, warrnambool, engineer, hughes, sapper hughes, 3795948, hughes 3795948, uniform, army uniform, trousers, army

Government House, Melbourne was constructed between 1972 and 1876 to a design of William Wardell. The interiors including the ballroom were created soon after the building's opening. The Victorian Heritage Register citation notes that the extravagant single storey State Ballroom occupies the entire south wing. The slide is significant as it represents the decoration of the State Ball Room in 1979.One of six colour transparencies, purchased from John T Collins of interior and exterior views of Government House, Melbourne. This photograph (slide) is of the coffered ceiling of the State Ballroom."South Yarra Government House Ballroom J Collins 17-10-79"government house -- melbourne, victorian interiors, ballrooms -- melbourne (vic.), john t collins

This photograph shows Peter Nixon, Minister For The Interior officially opening the Orbost Historical Society Museum on December 1st, 1967. The first Orbost Museum was opened in 1967. It was situated in Nicholson Street, Orbost. Peter Nixon grew up on the family farm on the Snowy River. He entered Federal Parliament in 1961 as the Member for Gippsland, holding various portfolios before retiring in 1983.Peter Nixon grew up on the family farm on the Snowy River. He entered Federal Parliament in 1961 as the Member for Gippsland, holding various portfolios before retiring in 1983. The Nixon family has been in the Orbost district since 1885.A large black / white photograph of a man in a suit with one hand in his pocket Standing behind him are two men and a woman. The photograph has been taken inside the museum. The photograph is mounted on a white buff card and is in a white wooden frame. on front below the photograph - " Opening of the Orbost Historical Society Museum by Mr Peter Nixon M.H.R., Minister of the Interior 1st December 1967"museum-orbost-opening nixon-peter

Negative No. N328 and black and white print made by a laser printer (stored in folder ) of the interior of W7 1003 showing the new compartment arrangements - smoking was in the centre section. Photo taken 19/6/1955. Negative scanned hi res and imaged updated 21/5/2020.trams, tramways, mmtb, interiors, smoking, w7 class, tram 1003

This slouch hat belonged to Royal Australian Air Force serviceman/woman Forsyth. Khaki-coloured slouch hat with folded cotton band with blue strip around brim; gold coloured badge depicting a wreath with crown atop and ornamental letters “RAAF”. Four plastic eyelets at crow of hat and signature fold on crown. Wide brim edged with brown coloured binding. A hook on the left crown and left brim attach together to lift one side of the hat. On interior, brown leather chinstrap with metal adjustable buckle ad black leather sweatband stitched in with zig-zag black stitching and secured by khaki silk bow at back. Bow attaches a card reading “58” in a circle. Sticker on interior centre in brown and metallic gold. Size sticker hidden underneath sweatband reads “58 7 1/8”Label on interior of cotton band reads “A.G.C.F./VIC 1989 [broad arrow]/SIZE. 58/8405-66.[crossed out 109-5392]033-5309”. Handwritten on interior brim “FORSYTH”. Size labels read “58” and “58 7 1/8”. Sticker reads “COMMANDO/WOOL SLOUCH HAT/MELBOURNE”uniform, royal australian air force, raaf, r.a.a.f., slouch hat, 1980s

Bendigo Art Gallery was founded in 1887 and has over the years undergone extensive building and renovation programs in recent years adding a new contemporary wing, storage areas, and a new entrance and gallery shop. This photographic reproduction of an older post card shows the interior of the rooms now known as the 'historic courts' and an exterior front view c. 1910. Photographic reproduction of unknown post card. Possibly larger than original size. Writing on reverse. Believed to be related to Cat No 0306.Reverse: BENDIGO ART GALLERY 1910 / "The interior architecture remains / largely the same.' / *This photograph is the property / of the Bendigo Art Gallery, and / should be returned promptly.bendigo art gallery, city of greater bendigo tourism

.1 - No. 42 crossing Lydiard St level crossing - running Special - with the Provincial Hotel in the background. .2 - side on view of part of No. 42 showing the Maximum Traction Truck, Brill 22E .3 - Interior view of a Maximum Traction Tram (probably No. 42), showing controller and air gauge. .4 - Interior view of No. 42, with a note "Almost a W2 style, but more cramped" .5 - ditto showing the PMTT logo. Has a strong association with a Melbourne tram driver who assembled the scrap book and series of photos of Ballarat trams at the time of closure. Yields information about the tram operations.Set of five black and white photographs contained with Reg item 5988, a Stamford Kiwi School Scrap Book - card covers, 23 sheets, spiral bound, titled "Ballarat", prepared by Ellen Butland of Auckland following the closure of the SEC Ballarat Tramway system.closure, trams, tramways, ballarat, tram 42, interiors, lydiard st nth, level crossings, brill trucks, pmtt

This shirt is part of a Royal Australian Army Ordnance Corps uniform. The Royal Australian Army Ordnance Corps (RAAOC) is responsible for various logistics and organisational operations, such as maintenance of parachutes, fuel distribution, personnel administration, explosive disposal and laundy operations.Short sleeved khaki shirt in light polyester material. Fastened by seven plastic buttons along centre. Two chest pockets fastene with externa flap and button. Fabric shoulder epaulettes on left and right side held in place with a plastic button. Label on interior back of neck and stamp on collar.Printed in black inscriptions on the white label: “ADI P/L/VIC 1989/[broad arrow]/SIZE. 40/8405-66-093-8319/SERVICE NO/NAME/DO NOT BOIL OR WRING/MACHINE WASHABLE/DRIP DRY, IRON LIGHTLY/WITH WARM IRON”. “SIZE 40” is stamped in black into on interior collar. Inscription handwritten on interior lower back panel “4800045/MARTINS.”military, army, raaoc, royal australian army ordnance corps, uniform, parachuting, marksman, warrant officer

This photograph shows a library interior with three women in the back corner. Black and white photograph of the interior of a library. There are empty shelves along the left hand wall with boxes on the floor in front of them. Three women are standing in the back corner, two facing away from the camera and one looking towards it. An open door shows a refrigerator in another room. The back wall is shelved with books. There is a large amount of open floor space in the foregroundPrinted in grey ink: | 526B / 15.11.78library, libraries