The lake surrounds Bled Island (Blejski otok). The island has several buildings, the main one being the pilgrimage church dedicated to the Assumption of Mary (Cerkev Marijinega vnebovzetja), built in its current form near the end of the 17th century, and decorated with remains of Gothic frescos from around 1470 in the presbyterium and rich Baroque equipment. The church has a 52 m (171 ft) tower and there is a Baroque stairway dating from 1655 with 99 stone steps leading up to the building. The church is frequently visited and weddings are held there regularly. Traditionally it is considered good luck for the groom to carry his bride up the steps on the day of their wedding before ringing the bell and making a wish inside the church. The traditional transportation to Bled Island is a wooden boat known as a pletna. The word pletna is a borrowing from Bavarian German Plätten 'flat-bottomed boat'. Some sources claim the pletna was used in Lake Bled as early as 1150 AD, but most historians date the first boats to 1590 AD. Similar in shape to Italian gondolas, a pletna seats 20 passengers. Modern boats are still made by hand and are recognizable by their colorful awnings. Pletna oarsman employ the stehrudder technique to propel and navigate boats across the lake using two oars. The role of the oarsman dates back to 1740, when Empress Maria Theresa granted 22 local families exclusive rights to ferry religious pilgrims across Lake Bled to worship on Bled Island. The profession is still restricted. Many modern oarsman descend directly from the original 22 families. https://en.wikipedia.org/wiki/Lake_BledDigital photographlake bled, church, stairway, steps, slovenia, stone, tradition

Rope used to lay horse lines in Light Horse encampmentTwo metre sisal rope with wooden toggle on one end and metal ring on other end. light horse, rope

Round wall plaque. Metal plate centred on wooden turned circular frame.Front: Outer ring, 100years service to the nation. 1901 - 2001 Inner ring, Teamwork. Courage. Initiative. Centre, Rising sun emblem, The Australian Army. Back: Market Link Solutions Canberra Australia Kyneton RSL. S/B Donated by Don Radleyplaque

Wooden shield with crest topped with crown and gold rim, blue inner ring.Melbourne Communication Unit Royal Australian Airforce. Ocius Alis Back: Badges & Crests 52 Barry’s Point Rd. New Zealand

A lightweight wooden baton 51 centimetres long, one and a half centimetres diameter at one end tapering to half a centimetre at the other. The thicker end has a metal cap and a one centimetre wide leather strip wound around it for ten centimetres of the baton. The top of the leather is secured with a nail and the other end has a metal ring around it.conductors baton, musical instrument

William Abendigo Thompson was English bare-knuckle boxer born in Nottingham, 1811- 1880 and whose name is (allegedly) borne by the City of Greater Bendigo. One of 21 children he started fighting aged 18 and began prizefighting aged 21. His career spanned from 1832–50, and is said to have lost only one fight. Later in life, after spending time in prison he became a Methodist evangelist preacher. While the artist and date of production of this work are unknown the initials JJLh (or n?) are just legible lower right on canvas. Other clues for an approximate date of creation include the similarity in composition of this painting to a popular aquatint of Bendigo by Charles Hunt Senior (1803 - 77). Based on the markings on the back of the canvas for Rowney and Co and the address given, we can ascertain that the canvas itself was manufactured between 1884 - 1896. The painting also includes an extract of the Conan Doyle poem 'Bendigo's Sermon' which was written in 1911. Given these three factors, a date for the painting can be surmised as post 1911. Stretched made by George Rowney’s is one of very few artists’ supply businesses with origins in the 18th century still trading today, as Daler-Rowney, albeit no longer in family hands. The business has been a significant supplier of canvases and panels from the 1810s. Naive, Primitive, British0348.1 Framed oil painting of the bare fisted knuckle fighter William Abendigo Thompson painted in a naïve style. Depicts Thompson, bare chested in an outdoor fighting ring with his fists raised with a water bucket at this feet. 0348.2 Typed note re the history of the naming of the City of Bendigo.Top centre front of painting; You didn’t know of Bendigo? That knocks me out! Who’s your board school teacher? What’s he about? Chock a block with fairy tales – full of useless cram And haven’t heard o' Bendigo the pride of Nothin’ All sing along together lower centre painting; William Abendigo Thompson centre Inner wooden frame; bendigo back of canvas; Geo. Rowney & Co 64 Oxford Street and Princes Ball Piccadilly London W sticker lower centre back of frame; donors name and address. Initials illegible lower right.city of greater bendigo sport

The bell was used for Trade Week to signify "time's up" at Optus Oval. Prior to this it was used to let Alan Espie's children on their Wandin property to come home.Why Al chimes in for Carlton Tony De Bolfo, Carlton Media Feb 20, 2014 11:05AM Alan Espie with the famous bell. (Photo: Carlton Football Club) Alan Espie with the famous bell. (Photo: Carlton Football Club) Related Etched into the rim of the bell Alan Espie has rung at every trade week gathering since 1994 is a touching quote attributed to his grandson. Dear Pa, May you always ring true blue, Love Harry Just thinking about that inscription often brings big Al to tears. The story of the Espie bell has its origins at the old family property at Wandin in the picturesque Yarra Valley, in the days when the Espies’ kids were at the neighboring creek fossicking for local platypus. “If they got too far away we’d ring an old cowbell,” Espie recalled, “and years later, my daughter Jo brought me this replacement bell from some second-hand naval place”. “Not long after Shane (O’Sullivan) asked me to officiate at trade week and that’s when the bell came into vogue.” A permanent fixture at trade week, Espie would ring the bell to signal the opening of trading when club recruiters gathered – initially within the confines of the Carlton Heroes Stand at Visy Park, more recently at Etihad Stadium. In those early days at Carlton he caused a stir as bell ringer, drawing curious responses from officiating journalists, recruiters and coaches alike. “I even remember (Kevin) Sheedy asking me if I was selling muffins,” he recalled. Then, when trade day was relocated to Etihad, Espie’s daughter thought it appropriate to get the bell inscribed. “Because the bell was leaving Carlton, Jo got it inscribed on my grandson’s behalf, because he was only four or five then. When I saw what was inscribed I was tearful,” Espie said. “The bell is very important to me, particularly at this time, because Jo is battling health problems at the moment, my grandson is autistic and she’s fought like hell to get him through.” Espie joined Carlton’s Under 19 committee on the eve of the senior Premiership season of 1979 and managed the club’s junior squads, the Bert Deacon Squad included. “I worked very closely with Geoff Southby, ‘Swan’ McKay and Trevor Keogh when they were coaching the Under 19s and I was recruiting as well,” he said. “In 1981 and ’82 I forward scouted for ‘Parko’ (David Parkin) and later on I did the same for ‘Wallsy’ (Robert Walls). After that I coordinated recruiting in central Victoria and it was nothing for me to do 25,000ks a year in my own car – and I loved every minute of it.” Espie’s passion for Carlton and empathy for its wartime players Bert Deacon, Ollie Grieve and Jack “Chooka” Howell can be sourced to his childhood years. His grandparents lived not far from the old ground on Wilson Street “and that’s how I got in for the ’45 Grand Final”. “My uncle, who had just got back from the war, grabbed a ladder from Wilson Street and set it up against the barbed wire fence at the ground. I climbed the ladder and caught my arm on the barbed wire, but I got over the top and saw the game while I straddled the fence,” Espie said. “What I saw was what you would today call ‘spotfires’ and I reckon it took football 20 years to get rid of it.” Today, Espie continues to ring in the yearly trade talk days at AFL headquarters (with the notable exception of 2012 when he was hospitalized), but he’s in no doubt as to where the bell belongs. “This bell has had nothing to do with Wandin but everything to do with Carlton - and with the 150th year of the club I think the bell stays here (at Visy Park). I still hope to ring the bell for the AFL this year, but at least I’ll know where it is,” Espie said. “I’ve told Jo about this and she tells me Harry’s rapt, because he’s a big Carlton supporter and he’s so happy his name is on the bell.”Wooden handle attached to a brass bell."Dear Pa, may you always ring true blue, Love Harry"

Bootmaking is a complex process requiring a variety of tools. The leather is cut to shape, glazed & burnished (polished) with heated irons. The pieces are stretched onto, & nailed to, a wooden last to form the boot. Once attached to the insole, the boot is finished on a metal last. Uppers are stitched with waxed thread through holes made with an awl. Heels comprise pieces nailed together & neatened with a heel shave. Metal plates, short nails or hob nails driven into the sole & heel, often in a pattern, improved durability.Cast Iron ball and ring bunion stretcher.boot stretchers

A tool for holding or pulling something, made of two curved metal bars that move against each other so that when the handles are pushed together the other ends close tightly.Steel Bulldog pincer with wooden handle and brass ring.carpenters pincers, carpentry tools

From the home of the late Mr and Mrs W.J. Sebire, C1890Beaten brass dinner gong with silver trim on two supporting horns at side, mounted on a wooden base. Mallet is silver with hanging ring and leather surround on knob. Has a leather hanging strap.gongs, gong strikers

Sold as a souvenir of Mt Buffalo. 'Souvenirs in relation to the Chalet and Mount Buffalo were first mention in December 1912... A large range of souvenirs has since been associated with the Chalet and Mount Buffalo from crafted wooden items, silver spoons, cups etc... The collection includes a broad selection of products that have been sold throughout much of the Chalet's history, each representative of the transient fashions of their period.' (Pg. 114. Historica) "Souvenirs in relation to the chalet were perhaps first mentioned in December 1912, when enterprising locals, Mr J Pass of Porepunkah and Mr C Walker asked for permission to use timber on the mountain for making ornamental souvenirs . The government was agreeable to the ide and soon afterwards PWD chief architect George Austin went to Mount buffalo to make arrangements for supply of the timber, They proposed to make wooden egg cups, small boxes and photograph frames to sell to tourists, small items that' will serve as an advertising medium of the famous mount'" (Pg. 113.Historica) ' Fig 123. Bookends MBC0319,serviette rings MBC0217.2,eggcup MBC0218 and ashtray MBC0205 made of mulga, a wood from particular types of wattle tree that grow in arid climates. Souvenirs crafted from mulga became popular in the post WW2 years' (Pg 117. Historica) Purchased in a second hand shop and donated to MBC. Listed in Draft Inventory of Significant Collection Items . Appendix A.3. Souvenirs. (Pg 168. Historica).Two matching mulga wood book ends. They form a sphere when placed together. Hand painted motif and inscription on each. Painting of a skier dressed in colourful clothing on each and "From Mt Buffalo" painted at the base. "From Mt Buffalo"

Pale wooden shoe last extensions with metal rings attached at the top. small locating holes on both sides of each. Locating grooves on each.L and R stamped on side. 10/3 written in lead pencil on inside

Carved wooden heel extensions with inverted slide on one side and locating slide on other sideL and R stamped on each. Left extension 9 1/2(half) / 3 on inverted slide written in pencil. 16 written on locating slide in pencil Right extension 9 1/2(half) /3 on inverted slide written in pencil. 15 written on locating slide in pencil tied together with orange thread through brass rings

Used to make cast for the metal ring gear for the water wheel which powered the Mill.Slightly arched wooden pattern with wooden ridges along the edge. Three square metal plates with a hole in the centre, bolted on with four bolts. Ten pentagin pieces of wood attached to the face.

Used in the 19th and early 20th century.A metal scythe with a long curved wooden handle to manoeuvre the blades. There are also two shorter wooden handles or 'nibs' fitted at an angle to suit the user attached to the main handle by a metal ring. It has two curved pointed cutting blades which are attached by nuts and bolts to the handle.agricultural tools, scythes, cutting tools, agricultural equipment

Used on a farm in the late 19th or early 20th century.A pair of brass horse hames with a missing chain link at the top. Each has a hook attached with a metal ring at the end. It has four rings. It would have been attached to a horse collar and used to to distribute the load around a horse's neck and shoulders when pulling a wagon or plough. The collar often supports and pads a pair of curved metal or wooden pieces, called hames, to which the traces, which attach to the wagon or plough, of the harness are attached. The collar allows the horse to use its full strength when pulling. It was used in the late 19th or early 20th century.horses, horse accessories, harness, animal accessories, farm equipment, hames

Used on a farm in the late 19th or early 20th century.A pair of tubular steel horse hames which are linked together by a five links chain at the top to two rings. There are two large flat steel hooks attached to the sides with bolts and nuts and it has two metal rings at the bottom. It would have been attached to a horse collar and used to to distribute the load around a horse's neck and shoulders when pulling a wagon or plough. The collar often supports and pads a pair of curved metal or wooden pieces, called hames, to which the traces, which attach to the wagon or plough, of the harness are attached. The collar allows the horse to use its full strength when pulling. It was used in the late 19th or early 20th century.horses, horse accessories, harness, animal accessories, farm equipment, hames

Used on a farm in the late 19th or early 20th century.A pair of handmade wooden horse hames which are linked together by a leather strap at the top. It has leather traces and four metal rings. At the sides there are two long leather strips with chain links attached to each end.One long leather strap is shown in the second photo in Media - not to be confused with all the other tools in the photo. It would have been attached to a horse collar and used to to distribute the load around a horse's neck and shoulders when pulling a wagon or plough. The collar often supports and pads a pair of curved metal or wooden pieces, called hames, to which the traces, which attach to the wagon or plough, of the harness are attached. The collar allows the horse to use its full strength when pulling. It was used in the late 19th or early 20th century.horses, horse accessories, harness, animal accessories, farm equipment, hames

A wide flat green painted wooden triangular shaped swingletree with a steel bar attached under the wooden section. There are two oval rings joined at each end and there is a wider steel bar in the middle with two chain rings joined to it. It was used to balance the pull of a draught horse or other draught animals when pulling a vehicle.horse accessories, swingletree, horses, horse tack

Used on a farm in the late 19th or early 20th century.A pair of shaped steel horse hames which are linked together by a five links chain at the top to two rings. There are two large flat steel hooks attached to the sides with bolts, nuts and rivets and it has two metal rings at the bottom. It would have been attached to a horse collar and used to to distribute the load around a horse's neck and shoulders when pulling a wagon or plough. The collar often supports and pads a pair of curved metal or wooden pieces, called hames, to which the traces, which attach to the wagon or plough, of the harness are attached. The collar allows the horse to use its full strength when pulling. It was used in the late 19th or early 20th century.Indicipherable inscriptionhorses, horse accessories, harness, animal accessories, farm equipment, hames

An hourglass or sandglass is an instrument for measuring a defined time and can be used perpetually by simply turning it over immediately the top bulb empties. The clear blown glass is shaped into two equal sized bulbs with a narrow passage in the centre and contains uniform sized sand or glass particles in the lower bulb. The width of the neck regulates the constant flow of the particles. The glass is held in a stand with top and bottom of equal shape and size. Hourglasses can measure an infinite variety of time by gauging the size of the particles, the shape and size of the bulbs and the size of the passage between the bulbs, thus measuring hours or minutes or even seconds. Generally an hourglass sits between discs of wood at the ends, which are joined by long wooden spindles between the ends and tightened by screw caps. The length of time can be adjusted by adding or removing sand particles. The use of the marine sandglass (or hourglass) has been recorded in the 14th century in European shipping. A one minute sandglass was used in conjunction with the ship’s log for ‘dead reckoning’, (see below) that is, for measuring the ship’s speed through the water. They were also used to regulate ringing the ship’s timetable; for example a 4 hour sandglass was used for the length of the sailors’ watch, and a half hour timer for taking of readings for the ship’s log; the ship’s bell would be rung every half hour. It was usually the role of the cabin boy to watch and turn the sandglasses over at the exact time of them emptying their upper chambers and to ring the ship’s bell. Hourglasses have been used historically for many hundreds of years. Some have been used for timing church sermons, in cooking, in industry and at sea. Even today they are used for measuring the cooking time of eggs and timing a player’s turn in games such as Boggle and Pictionary. The sandglasses at sea were gradually replaced in the late 1700’s to early 1800’s by the more accurate chronometers (marine clocks) when they became reliable instruments. DEAD RECKONING (or Deduced Reckoning) Dead reckoning is the term used to describe the method of calculating the ship’s position from its speed and direction, used in early maritime travel, mostly in European waters. Both the (1) speed and the (2) direction of travel were recorded on a Traverse Board at half-hourly intervals during a helmsman’s watch of 4 hours. The navigator would record the readings in his ship’s log, plot them on his navigational chart and give his updated course directions to the next helmsman on watch, along with the cleared Traverse Board. This was a very approximate, but none-the-less helpful, method of navigation. The wooden Traverse Board was a simple pegboard with a diagram of a compass with eight peg holes along the radius to each of the compass points, plus a grid with ascending half hours in the left column and increasing ship’s speed in knots in a row across the column headings, with a peg hole in each of the intersecting cells. A number of wooden pegs were attached to strings on the board. By placing one peg consecutively in the direction’s radius hole, starting from the centre, and the speed holes when the half hourly reading was taken, a picture of speed and direction for the whole 4 hour watch was created. (1) To measure the ship’s speed a one minute hourglass timer was usually used to measure the ship’s speed through the water and help to calculate its longitude. A rope, with knots at regular standard intervals and a weight such as a log at the end, would be thrown overboard at the stern of the ship. At the same time the hourglass would be turned over and a seaman would start counting the number of knots on the rope that passed freely through his hands as the ship travelled. When the timer ran out the counting would be stopped. A timer of one minute (one-sixtieth of an hour), knots spaced one-sixtieth of a nautical mile apart, and simple arithmetic easily gave the speed of the ship in nautical miles per hour ("knots"). This would be recorded every half hour. The speed could however be inaccurate to the travel being affected by ocean currents and wind. (2) To calculate the ship’s direction a compass sighting would be recorded each half hour.Marine hourglasses or sandglasses were used from around the 14th to 19th century during the time of sailing ships. This hourglass is representative of that era, which is during the time of the colonisation of Australia. Hourglass or sandglass; an instrument used to measure time. Two equal sized clear glass bulbs joined with a narrow passage between them, containing equal sized particles of sand grains in lower bulb. Glass sits in a brass collar at each end, in a frame comprising 3 decorative brass columns or posts, each attached top and bottom, using round screw-on feet, to round brass discs. Disc have Roman numerals for the numbers 1 - 12 pressed into their inner surfaces and hieroglyphics on the outer surfaces. Roman numerals on inner surface of discs " I II III IV V VI VII VIII IX X XI XII " Hieroglyphics impressed on outer surface of discsflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, horology, hourglass, hour glass, sandglass, sand glass, timing instrument, dead reckoning, deduced reckoning, finding latitude at sea, sandglass with hieroglyphics and roman numerals, hourglass with hieroglyphics and roman numerals, brass hourglass

Two Hand made wooden staves, approximately 1800cm long. One staff has a plaited wicker trim around the handle. The foot is marked with circular stripes. The other staff has a carved handle with carved circular rings. This item was formerly #28staves, staff, handmade weapon

Part of bullock harness. Wooden yoke with 4 holes for the bows, and 3 for the centre metal ring supported by a metal plate bolted into the wooden yoke.

The whippletree consists of a loose horizontal bar between the draught animal and its load. The centre of the bar is connected to the load, and the traces, chains or straps on each side of the harness, attached to its ends. Whippletrees are used when pulling a dragged load such as a plough, harrow, or log. The whipple tree was attached to a scoop, which was used for building the 'Puffing Billy' railway and also for scooping out Emerald Lake.Wooden bar with metal hook at each end and a metal ring attached to the centre.

The Villa Alba Museum is cultural institution committed to the collection, study and display of 19th century interior decorative finishes, and the components of 19th and 20th century interior decoration. These include artefacts (wallpapers, textiles, carpet samples), furnishings, printed materials (catalogues, books, periodicals), and pictures (photographs).The tiebacks complete with tassels are historically significant for being associated ensuite with DAD-035-0001, the suite of curtains. The tassels have aesthetic significance as beautiful and intricate pieces of late 19thC interior decoration.6 parts of a total of 3 pairs of curtain tiebacks. Each pair comprises a length of plain gold silk cable cord plus a second, equal length with a magnificent tassel in the middle; the two pieces would loop around the lower-middle length of each curtain, pulling it open in a graceful drape. One pair is slightly shorter than the other two. The tie backs are made of floss (soft, shiny) silk cord, composed of two thick strands twisted together into a cable cord. Three lengths have an elaborate tassel attached to the middle of each cord, to weight the tieback in an elegant loop, with the loose ends attached to hooks or pins on the window frame. Each tassel is formed on a turned wooden core, wrapped with floss silk thread; further decorated with knotted netting, applied braid, and 16 glass beads. The big end of the mould forms a large, flattened shape, from which hangs a ring of long bullion fringe. Today this looks tarnished-silver (nearly black), colour, but as shown by the card of detached lengths of bullion fringe (DAD-035-0005), the untarnished colour would have been bright gold. Part of a group of 7 curtains with associated furnishings which includes a curtain with original fittings, fringe and braid unpicked from other curtains, and these 6 curtain tie backs. The six curtain tie backs are identical, though one pair is shorter. These curtain decorations are truly luxurious; the original suite of curtains would have been very expensive, an eloquent item of conspicuous consumption of luxury goods.Attached handwritten note : "VA Th. 7/6/2012 Ric Freeman 0419875707 (Nat Trust member) & Julie Freeman 0419875706 / re soft furnishings, tassels, trimmings, braid set / Jessie, Terry (and Chris St) to view, collect". The phone numbers were tried in October 2024, and though picked up, the contacts did not want to talk about the curtain donation.interior decoration - history, curtain accessories, tassels

The Garryowen Perpetual Trophy is awarded annually to the winner of one of the most prestigious equestrienne events in Australia, the Garryowen Equestrienne Turnout. The competition is named after three-time Royal Melbourne Show champion saddle horse, GARRYOWEN, whose owner Violet Murrell died tragically whilst trying to save GARRYOWEN from a stable fire in 1934. A Heroine of Racing Mrs Violet Murrell of Melbourne, was a heroine who died trying to save her horses when the racing stables burned. The reason for her rescue attempt was twofold; she was both trying to retrieve an asset and was rescuing an animal from its agony. The heart of the racing world in Melbourne went out to Murrell and trainers, jockeys, and stable-boys came in crowds to her funeral. 'In the racing stables, in truth, the horse and the man are part of each other; and Mrs Murrell's name, with the manner of her death, will live as a tradition in the fraternity of men and horses to which she belonged'. (Sun, Sydney, Sunday 1 April 1934, p. 4) Began with a fire This trophy began as a tribute to a brave woman who risked and lost her life trying to rescue her horses and dog from a fire in 1934. It has become the premier turnout event for horsewomen in Australia. The idea came from a gathering at the Police Depot in St Kilda Road Melbourne, where friends of Violet discussed how to remember her and her beloved horse GARRYOWEN. The event was first staged at the 1934 Royal Melbourne Show. The public, through the Sporting globe newspaper, contributed to the cost of buying the 12 inch bronze statuette which is a perpetual trophy. The winner is also presented with a blue sash fastened with a small photograph of Mrs Murrell riding GARRYOWEN. Jockey, jumper, show ring rider Violet Murrell was 29 years old when she died. She had a career as a flat-race jockey riding and winning against men. She was also a successful jumps jockey. (Mandy Bede)A bronze horse statuette mounted on a slab of marble and a wooden base with metal plates.trophy, horses in action, horses, melbourne royal horses in action competition, prizes, turnout, blue ribbon competitions, murrell, violet murrell, garryowen, garryowen perpetual trophy, garryowen equestrienne turnout

Part of|Mrs J. Lattins collection.Wooden serviette/napkin ring from Jerusalem featuring a camel and a man carrying something on his head with sand dunes in the distance.Jerusalemdomestic items, table setting