Colour photo of the roof trusses of the Commonwealth Aircraft Corporation in Lorimer St.built environment - industrial, commonwealth aircraft corporation, cac

Pressure cooker. With the logo of CAC (Commonwealth Aircraft Corporation) on inside of lid.Logo on inside of lids "CA" superimposed over outline of birddomestic life, industry - manufacturing, commonwealth aircraft corporation, cac

From a box of photographs in Nancy U'REN's papers used during research for her thesis, The Early Growth and Development of Sandridge (1976) and/or her book with Noel TURNBULL, A History of Port Melbourne (1983). The Wackett Trainer was designed in Australia and manufactured at the Commonwealth Aircraft Corporation factory on Fisherman's Bend.Black and white photograph from the Commonwealth Aircraft Corporation showing the Wackett Trainer airplane in flight.commonwealth aircraft corporation, wackett trainer, transport - aviation and aerodrome, nancy u'ren nee morris

This item came from Geoff Bishop's rooms at Mollison House, 386 Albert Street, East Melbourne. Distributed by Ethnor P/L Sydney, these bulk purchase packs pre-dated the individually sterile packaged products with disposable applicators.Two white, plastic Lippes Loop IUDs [.1 and .2], with yellow string attached to one end of each. Double S-shape intrauterine devices. Also includes "LIPPES LOOP" product information label [.3], and a clear hinged plastic case with adhesive sticker [.4].intrauterine device, contraception

This item came from Geoff Bishop's rooms at Mollison House, 386 Albert Street, East Melbourne. Distributed by Ethnor P/L Sydney, these bulk purchase packs pre-dated the individually sterile packaged products with disposable applicators.Ten Lippes Loop IUDs [29.1-29.10], Size B. Made of white plastic with black threads attached at one end of each. Double S shape intrauterine device. With clear plastic bag [.11], clear plastic hinged container [.12] and paper product information sheet [.13].intrauterine device, contraception

The aircraft (Serial Number 159 – registration VH-GNT) was assembled by RAAF Richmond Gliding Club from a kit manufactured by Schweizer Aircraft Corporation, Elmira, New York State, USA, in 1963. First flown 21 December 1963. Served at RAAF Base, Richmond, NSW, until December 1978 at which time it had recorded 1981 hours from 9870 flights. The aircraft was sold to Peter Fitzgerald and moved to Gosford and later on, to Queanbeyan where it was stored under cover until April 1983. It was not flown between 1978 and July 1983. In 1983 the glider was sold to Harold Walton. A Certificate of Airworthiness inspection was done by various members of the Canberra Gliding Club where minor repairs were made. On 24 July 1983, it first flew on the airworthiness certificate test flight at Bunyan, NSW, the home of the Canberra Gliding Club. In service at Bunyan until November 1986 the hours flown increased to 2078 from 10249 flights. A certificate of airworthiness inspection was completed on 11 April 1987 but the aircraft was apparently only recorded a few more hours by 9 January 1998 when it last took to the air. When donated to the Australian Gliding Museum in January 2020, the aircraft was in storage at premises of the donor, Harold Walton, at Walkerville, South Australia.This aircraft is the only one of the 258 SGS 2.22s produced by Schweizer to come to Australia. It is a good representative example of the SGS 2.22 type which featured metal construction for production of a robust club trainer. The aircraft apparently played a useful role over many years at Richmond and Canberra.High wing two seat utility glider of metal construction with fabric covering.Registration letters ‘GNT’ on each side of vertical stabiliseraustralian gliding, sailplane, glider, schweizer, raaf, richmond, fitzgerald, walton, canberra, bunyan.

Plaque: ‘Hans W Egli/Ingenieur / Fabrikation von flechenmashinen [sic; ?] / Pat. O, Steiger / Zurich II / No 2566. Sole Agents for Australia / Peacock Bros./ Business Systems Company / 558 , 560, 562 Collins St., Melbourne / and at / Sydney, Adelaide, Perth’ Plaque: ‘Presented to . / Department of Information Science / Melbourne University / by the / Gas & Fuel Corporation of Victoria / This calculating machine was used by Engineers of the Metropolitan Gas Co and Gas & Fuel Corporation / from 1917 to 1970’

A number of Plumbing tools dating from 1880s-1970s and used in teaching at Collingwood Technical School then also at Preston Technical School and at Northern Metropolitan College of TAFE's Heidelberg campus. Includes: Kerosene blow torch X 2 (1930s-); Stillson Grips; Pipe Cutter; Mash hammer; Adjustable spanner X 3 different sizes; Caulking tool; 5 way tee, 2X3 way tee, 4 way tee (1930s-); Old Handmade lead traps (student work) X 2; Metal tool tray holding; Offset adjustable spud spanner; Pear shaped lead working mallet; Bossing tool for lead work (1880s-1920s); Soldering iron (1920s-); Set square; Large screwdriver; Also Plumbing texts: • Problems for elementary physics, new rev. edn., by Thomas Tasker and Alexander Boden, Science Press, Sydney, 1966. • Gasfitting. Printed and published by McCarron Bird Pty. Ltd. [Melbourne] • Trade science for plumbing apprentices, Education Dept. Victoria, 1954 • Sanitary Plumbing and water supply, Dept. of Labour • Gasfitting, produced by members of the Colonial Gas Association Limited, Gas and Fuel Corporation of Victoria, and the Technical Division of the Education Department of Victoria. Rev metric edn. 1976 • Mechanical world year book 1953, Manchester Emmott & Co., 1953 collingwood technical school, preston technical school, northern metropolitan college of tafe, plumbing tools, plumbing texts, nmit