A blowtorch is a fuel-burning tool used for applying flame and heat to various applications, usually metalworking. Early blowlamps used liquid fuel, carried in a refillable reservoir attached to the lamp. Modern blowtorches are mostly gas-fuelled. Their fuel reservoir is disposable or refillable by exchange. The term "blowlamp" usually refers to liquid-fuelled torches still used in the UK. Liquid-fuelled torches are pressurized by a piston hand pump, while gas torches are self-pressurized by the fuel evaporation. In 1882, a new vaporizing technique was developed by C. R. Nyberg in Sweden, and the year after, the production of the Nyberg blow lamp started. It was quickly copied or licensed by many other manufacturers. The US blowlamp was independently developed with a distinctive flared base and was fuelled by gasoline, whereas the European versions used kerosene for safety and low cost.The family of Mr Howcroft were early settlers in Moorabbin ShireA brass blow-torch B.A. HJOP Co. STOCKHOLM SWEDENblowtorch, stockholm sweden, welding, moorabbin, cheltenham, bentleigh, early settlers

A wooden racquet featuring a decal image on both sides of the throat, of a gold shield featuring the Olympic symbol in the centre. Inscription from head to stem, on both sides: OLYMPIC/FIBRE/WELDED/THROAT/SLAZENGER. Materials: Wood, Nylon, Metal, Glue, Lacquer, Leather, Ink, Ribbon, Adhesive tape, Paint, Stringtennis

This container is a piece of trench art. It has been made in 1917 in World War One. The container is made from a 4.5 inches Howitzer shell. The 4.5 Howitzers were British artillery units made with a short barrel and used to fire missiles over a high trajectory. It is probable that the container was made by an Australian soldier while on active service overseas during World War One. This container has no known local provenance but it is a very interesting and attractive piece of World War One trench art. This is a heavy brass container made from a Howitzer shell. The container is round with four-leaf clover –type patterns on the side and three round knobs welded on to the bottom to give it a base. There are many markings on the base of the shell and these may all be the original markings. The lid is made of lighter brass and has an octagonal-shaped knob on top. ‘4.5 Howr 11’ ‘B.A. 3 3 17’ ‘1917’ M.A.C.’ etc world war one, warrnambool

Black and white photograph of Q class tram 198 at Preston Workshops c1948. The tram was built in 1923 at MMTB's Holden Street Workshops and was later converted to Welding Car Loco No 15 (later No 15W). See page 79 of Destination City 5th Edition for another photo of this tram in storage at Preston Workshops in 1958.trams, tramways, q class, preston workshops, tram 198

This object was used to light gas burners, lamps, lights etc. The tapers were used to light a burner that was hard to reach. It may also have been used in a church to light candles. This taper and matches holder has no known local significance but is an attractive object and will be useful for display.This is a brass object made in two parts – a rectangular container holding six wax tapers and a squat jar-shaped container for holding matches. The match holder is welded to the taper holder. The tapers are bent or broken in several places. The taper holder has a hinged lid with a brass top. The match holder has an embedded shell-shaped emblem. social history, warrnambool history, metal candle taper

Brochure from the Peabody Museum of Salem, Massachusetts, dated 1934.Photo of the building on the front of the brochure. Founded in 1867. Brochure contains notes on the Entrance Corridor, Marine Room, John Robinson Hall, Academy Hall Corridor, Hall of Natural History, Hall of Ethnology and the Weld Hall. The back page contains a list of the Trustees and Officers.sciences, instruments - general, scalebuoy, bill ashman collection - correspondence, peabody museum of salem, george peabody, elihu thomson, william c endicott, richard whetland, francis h appleton, john c phillips, ward thoron, dudley l pickman, frank w benson, warren k moorhead, george a vickery, lawrence w jenkins, albert p morse, stephen w phillips, william e northery, s gilbert emilio, miss jessie s ives, j russell treadwell, john w stromberg, albert f hall, dr charles goddard weld

Yields information about the track maintenance activities of the track gang in Ballarat, the work they did, notes, names and other information.Collins Australian Diary, 1963, No. 324 printed by Collins Bros, pattered dark red cover with green cloth binding on cover, card covers, sewn sections with ruled sheets providing a diary for 1963, one week per double page. Has "useful information" sheets at from the diary. Used by the SEC Ballarat track gang to record their daily work, leave, welding, track cleaning, truck driver etc In the Memoranda section (page 4 and 5), list of names and addresses of track gang and notes on materials used, costs, scrubber use and hours, and length of track. Lancaster Wiseman Lakey Edwards Dowie Marks Fish Smith Bartlett (started 4/11/63) Loose contents 22/7/63 - sketch showing Webster St Crossover welding points?tram, trams, sec, ballarat, depot, trackwork, rails, scrubber tram

Track repairs in Wendouree Parade, June 2014. 6022.1 - Roger Gosney standing on track looking at damaged section 6022.2 - Close up of damaged section of track 6022.3 - Work crew including dog in safety vest 6022.4 - Work crew digging up road watched by the dog 6022.5 - Close up digging up road, Alan Snowball using jackhammer, Greg Robinson with spade, Roger Gosney on the far side with spade, and Barry Richardson with spade. 6022.6 - Greg Robinson in trench watched by Alan Roger, and Barry 6022.7 - Same group looking into the trench 6022.8 - Alan on hands and knees beside trench preparing for welding 6022.9 - preparing for welding, with safety screens in place. 6022.11 - Greg Robinson and Roger Gosney resting beside Wendouree Parade. (no. 10) Photo by Peter Waugh, collected for reference purposestrams, tramways, road works, btm, track repairs, wendouree parade

Set of two Colour slides, Kodak, white cardboard mount of track laying and reconstruction at St Kilda Junction during Oct. 1959. .1 - St Kilda Junction during reconstruction looking south with the junction arrangements shown. Has in the background, the Signal box, the junction hotel and the Corner Hotel, all with adverts for Penfold Wines, Fly ANA, Shell, Sepletts wins and Gilbeys Gin. Shows the vertical curves and the nature of the trackwork at this location. Photo 17/10/1959. .2 - ditto, but further back, with track welding, overhead work, tower wagon and a welding truck. In the background in addition to .1 are signs for Fosters Lager and Goodyear tyres. Dated 18/10/1959. Slide Number K(l)(293) and K(i)(293).Extensive handwriting on rear in ink and that it was photographed at 1/125 f4 and 1/125 f5.6trams, tramways, st kilda junction, overhead, tower wagon, welding truck, signal box, trackwork

Yields information about the track maintenance activities of the track gang in Ballarat, the work they did, notes, names and other information.1958 Woods' Australian Diary, No. 21, 3 days on a page, John Andrew and Co. red Rexene binding, card covers, sewn sections with ruled sheets providing a diary for 1958. Has "useful information" sheets at from the diary, including a ruler along the side of the sheet. Used by the SEC Ballarat track gang to record their daily work, leave, welding, track cleaning, truck driver etc Rear pages - has notes on materials used and a list of Track gang for 1958. (December Cash Account) E. A. Goldsmith W. H. Goldsmith E. J. Davis G. McQuinn H. Hoy A. W. Cunningham N. McVitty C. Edwards E. Lakey H. Lancaster S. Chibnall H. Smith Loose contents 21/7/1958 - SEC Safety Officers Newsletter, Feb. 1958 - inside has notes and sketches where joints welded and the dates. Inside rear cover - Daily time sheet - with the addresses of the track gang on the rear. - list of materials - rails by type and sleepers on hand - Reg Item 3705 - Rules Governing Depot Employees with notes and sketches where joints welded and the dates on the rear. (Item to be stored in a separate envelope - note was folded in half and stored in the rear section)tram, trams, sec, ballarat, depot, trackwork, rails

These medals were issued by the Victorian Government to commemorate the coronation of King George VI and Queen Elizabeth of Britain in May 1937. The medallions were given to Victorian school children.These medallions have no known local provenance but are retained for display purposes..1 A bronze-coloured medallion with etched letters and an image of the Coat of Arms of Victoria on one side and etched letters and an image of King George VI and Queen Elizabeth on the other side. The top has a welded ring to attach the medal to a chain or ribbon but the ring itself is missing ,2 as above except that the medallion is much more worn and has the attached metal ring on top. .1 and .2 King George VI and Queen Elizabeth To Commemorate Their Majesties’ Coronation May 12th 1937 Victoria commemorative medal, king george v1, coronation 1937

Series of three photos showing pyramid or rerailing plates and how they were used. Appears to be photographed at Preston Works shops during the 1970's. .1 - Fabricated plate with an angle welded to it, showing how it was positioned relative to a derailed wheel. .2 - Photo shows a pyramid plate placed relative to a wheel and axle set. .3 - ditto relative to an fabricated angle plate.trams, tramways, derailments, accidents, preston workshops, recovery

Used by Australian Army circa 1960s.Used by Australian Army circa 1960sUnpainted US style aluminium canteen formed by two seam welded halves (front and back sides) with an aluminium threaded top for attaching a top to the water canteen. The water canteen has a black plastic screw top lid attached to the neck by a metal link chain. The front of the water canteen is bowed outwards with the back being flat with a curved top doorway shaped indentation.australian army, water canteen, aluminium

This coffee pot was made for flat heating surfaces and not the open fire. The enamel coating was used as a thermal barrier to keep the contents hot. This could have been used as an all day coffee source for busy farm workers or breakfast and lunch times. When this pot was used at dinner time, it was a time period when dinner was more formal, with the whole family sitting at the dinner table. The white enamel would have been sufficient for the majority of households. When this pot was in use the dinner period was when the whole family was together and communication within the family was considered very important as a cohesive force. This was a time before television intruded into the atmosphere of relaying the day's activities to the whole family.In small rural communities within the Kiewa Valley a good cup of tea or coffee was a time for relaxation from the hard work of the day. This relaxation period was beneficial for not only the mind but also the body. This was particularly for the house bound mother with domestic chores that had, at this time in history not many "time saving" pieces of domestic equipment. A good pot of tea or coffee at "smoko" was a god sent. Although regarded by well groomed city folk that a coffee pot was for coffee only the less social etiquette standards of country folk permitted its use for tea. Versatility even within the household was of great benefit to the folk in the Kiewa Valley. This was even so for the immigrants that joined in and were warmly welcomed within this rural sector of Australia.This coffee pot is in the French style with a goose neck. It is fully coated in white enamel and has a concave bottom. It has a hinged lid and the main body has been rolled fastened to the bottom plate. The sandwiched steel body is approximately 1mm thick. The two piece neck has been welded together similarly the hinged lid and handle. Rivets are installed to the both bases of the handle. country kitchens, well heated coffee, coffee break in rural regions

Pipe being laid in trench, 3 workers handling the pipe another one on a bobcat and one on an excavator, man in red shirt standing next to a generator on a trailer, Centre is a hand activated compactor, behind which is the bobcat, left background is cream coloured building, Tree at rear of bobcat, Red brick building to right of centre, right front corner is welding eye shield on the ground.Kodakorganisation, industry, gas and fuel

Ona page typewritten short history of the Ordnance factory plus a ten pages document with 1) General information: location, site details, prime purpose, major capabilities and staffing levels. 2) Production in 1980-81 and 3) Major equipment items and capacities: cranes, treatment facilities, machining capacity, N.C. machines, fabricating capacity, welding and other equipment, testing facilities.bendigo, business, ordnance factory

Yields information about depot activities of the BTPS constructing the curve across Wendouree Parade to depot junction Nov. 1974.Set of 5 AGFA blue and white plastic mount 35mm slides of the construction of the access track across Wendouree Parade - November 1974. .1 - track prior to concreting with welding equipment under the cover. .2 - track completed, but yet to have the asphalt applied. .3 - the curve from the access track side. .4 - access track looking west .5 - ditto looking east.Various notations by John as to the slide number and the trams in pencil and ink.tramways, trams, btps, depot junction, wendouree parade, track construction, depot

Showing how tramway electrical current was returned to the electrical sub-station via the rails.Demonstrates an earth return bonding piece.Traction Return Current Rail Bond, consists of a multi strand copper cable abt 19mm dia. and 530mm long, with block of steel (25x25x43mm) brazed onto each end. The block of steel gets welded to the outside of the rail head at or near a joint in the rails. The bond is to ensure a reliable return current as the fishplates and bolts are subject to dirt and rust which can inhibit the current.tramways, electrical engineering, earth return, bonds, trackworks

Inge KING (26 November 1915 – 23 April 2016) Born Berlin, Germany Arrived Australia 1951 Inge King trained as a wood carver and studied at the Berlin Academy (1937-1939), Royal Academy London (1940), and the Glascow School of Art (1941-1843) . She moved to London in 1847 and began carving organic abstract forms in wood and stone. In 1949-50 she went on a study tour to the United States of America where she was inspired to work in metal . Inge King arrived in Australia in 1951 and she completed several large scale public works. Between 1861 and 1875 Inge King lectured at the Institute of Early Childhood Development, Kew. From 1976 to 1987 she lectured in Sculpture at Royal Melbourne Institute of Technology. She was a founding member of the Ceminal Centre Five group, and she actively lobbied architects, governments and State galleries to include modernist sculptures in their plans and displays. In 1991 Inge King joined the first National Trust of Australia (Victoria) Public Art Committee, advising on public art at risk and worthy of Trust classification. The Australian Women's Art Register describes Inge King as having been at the forefront of developing a non figurative vocabulary in Australian Sculpture. Welded bronzed steel sculpture painted black and red. This sculpture by Inge King was purchased in 1967 with funds raised by staff and students of Ballarat Teachers' College, a predecessor institution of Federation University Australia. During this era a collection was made which resulted in an annual purchase or commission of an artwork of note. The Federation University Art Collection features over 1000 works and was listed as a 'Ballarat Treasure' in 2007. Signed 'I. King' on the lower steel plate. art, artwork, inge king, king, sculpture, ballarat teachers' college collection, welded metal, metal sculpture

Metal Cash Tray for holding coins, formed from stainless steel and welded to give five compartments or areas for coins and one full length slot or opening at the rear for notes and other papers. Used by One Person Operator (OPO) or drivers from the time of the introduction of OPO's on the tramways until the full introduction of Metcard. Collected by Carolyn Dean/Cleak. Two copies held.trams, tramways, tickets, cash handling, metcard

Yields information about the track maintenance activities of the track gang in Ballarat, the work they did, notes, names and other information.Collins Australian Diary, No. 324 printed by Collins Bros, dark red card covers, sewn sections with ruled sheets providing a diary for 1967, one week per double page. Has "useful information" sheets at from the diary. Used by the SEC Ballarat track gang to record their daily work, leave, welding, track cleaning, truck driver etc Loose contents 18/6/1967 - SEC Sub-Requisition - weld two VR rail joints, Doveton St level crossing 9am Sunday 25/6 2nd last page - note re leave entitlements and work over the Christmas period. Mark Clough Wiseman Weightman Smith Palmer Rose Blake Inside back cover 1. - Sub-requisition for tree cutting 2. - Memo dated 18/8/1966 re electrolysis and welding and testing of joints to Reg Item 3707.. 3. - memo dated 29/11/1967 re tree clearing in Bungaree 4 - Sub-requisition re truck use re tree clearing 5 - Weekly time sheet for R. Palmer - Track cleaner, dated 29/12/1967. 6 - Four requisitions for undertaking non tramway work 7 - List of invitees to a SEC safety coittee meeting - on rear a list of names and leave owing. tram, trams, sec, ballarat, depot, trackwork, rails, scrubber tram

1. "AACS" - Australian Army catering Service. 2. "RAE" - Royal Australian Engineers. 3. "A FLD BTY RAA" - Royal Australian Artillery B.C.O.F. Japan 1946-1948.1. BANNER FRAMED, COTTON FABRIC, BLUE BACKGROUND, PALE GOLD COLOURED TASSLE FRINGE, WHITE EMBROIDERED INSCRIPTION, COLOUR PATCH CENTRE, GREY, PALE BLUE AND WHITE. 2. BANNER FRAMED, COTTON FABRIC, MID BLUE BACKGROUND, GOLD COLOURED TASSLE FRINGE, WHITE EMBROIDERED INSCRIPTION, COLOUR PATCH CENTRE, FUSCHIA WITH GREY SURROUND. 3. BANNER FRAMED, COTTON FABRIC, NAVY BLUE BACKGROUND, WHITE COLOURED TASSLE FRINGE, WHITE FABRIC INSCRIPTIONS, COLOUR PATCH CENTRE, RED AND BLUE WITH GREY SURROUND. 1,2,3, Frames - timber, block colour print, glass front, cardboard backing.1. White embroidered inscription. AACS. 2. White embroidered inscription, "RAE/6 Welding PLT/10 Bomb disposal/13th Army Troops/14th WKs PKs/1st AWT/17th CRE/42 & 43 Port Operating/28th FIELD COY" 3. White fabric inscription. "A FLD BTY RAA"/ "345 Aust LAD".military, ww2, japan, banners

This is a high-quality item and would have been used in a household in affluent circumstances. The firm of James Dixon and Sons of Sheffield, England, was established in 1806 and ceased to operate in 1992. Candles were widely used for household lighting until the advent and availability of electric lighting from the 1920s onwards. This item has no known local provenance but is retained because it is fine example of a household item of the past.This is an electro-plated silver candlestick holder. The base is roughly circular (more hexagonal) with an embossed edge and a handle attached by welding. The candlestick holder is vase-shaped with a circular open top for inserting the candle. The circular top also has an embossed edge. Attached to the handle by a clip is a cone-shaped snuffer. The candle holder and snuffer have been used. On the bottom of the base are the name and symbol of the maker and five hallmarks. ‘Jas Dixon & Sons Sheffield’ ‘866 P W/B’ household lighting, history of warrnambool, silver candlestick, candlestick with snuffer

Has a strong association with tram crews, possibly inspector (Dave Kellett?) in Ballarat, would have been issued to crews in order operate the tram car doors. Normally a L shaped key.T shaped steel piece, with a round top piece or handle with a rod that has been forged at the lower end to give a tapered square shape for use possibly in external doors on SECV Ballarat Trams - known as a square key. Was used to secure doors in both open and closed positions. Was probably chrome plated at the time of manufacture. .1 - square key fashioned from rod and welded at the top.trams, tramways, tramcars, doors, locks, security

Demonstrates an item that all SEC Ballarat tram crews carried, a simple key to open/close the doors and has a strong association with a SEC Ballarat tram crew member.T-shaped steel piece, fashioned from rod and welded at the top, with a round top piece or handle with a rod that has been ground to give a tapered square shape for use in external doors on SECV Ballarat Trams - known as a square key. Was used to secure doors in both open and closed positions. See Reg Item 3663 for similar items. Was used by SEC Ballarat driver John "Jock" Menzies.trams, tramways, tramcars, doors, locks, security

Timetable board for Camberwell Junction Batman Ave route 70, detailing times that services were scheduled to depart the Junction. Probably used until replaced by The Met style signs in the mid-1980s.Demonstrates a timetable board style used by the MMTB in the 1970s and early 1980s.Board made up to display tramway timetables for attachment to a post comprising heavy galvanised steel backing sheet with two small channels either end, spot welded to the steel back, front painted in green with the letters "M&M.T.B" in yellow paint, perspex sheet at the front, secured by 6 Allen screws with nuts on rear, containing a typed timetable sheet - for Camberwell Junction for Batman Ave timetable - undated. tramways, map, batman ave, camberwell junction, route 70, timetable

Victoria Bridge is a riveted and welded steel Warren truss bridge over the Yarra River completed in 1884 to a design by Fraser & Chase following a controversial design competition held in 1880. Funds for the bridge's construction were provided by the councils of Collingwood, Hawthorn, Kew and Richmond. The contract was awarded to Mr P. Platt. Charles Rowand was officially appointed Supervising Engineer in 1883. The winning design was based on the theoretical work of William Charles Kernot (1845-1909) who campaigned for economy in public works design and the application of scientific principles in engineering. ... The bridge was widened in 1890 by the addition of a third line of truss on new piers on the up stream side to carry horse trams. Work commenced in 1914 to convert the horse tramway to an electric tramway by the Prahran & Malvern Tramways Trust, part of the Trust's extension of its tramway into the eastern suburbs between 1913-18. In 1915 the bridge was further strengthened to accommodate the extra weight of electric trams and widened by the addition of two six feet cantilever footpaths. During this period the Prahran & Malvern Tramways Trust erected two ornamental gantries over the roadway to support overhead wires for the electric tramway. Further widening and reconditioning of the bridge took place in 1933, including the addition of four new welded trusses, two intermediate and two on the outside. The latter were supported on new cantilevered truss cross beams attached to the top of the piers. (Source: Heritage Victoria)Early and rare postcard of the Victoria Street Bridge linking Victoria Street and Barkers Road.Polychrome postcard of the Victoria Street Bridge which links Richmond and Abbotsford with Kew and Hawthorn.View from Harrison Cres embankment / former Xavier College boatshed on site of tree in foreground. / Chimney left corner - Wool Scoring Mils in Victoria St. / On horizon - Studley Villa, Studley House circa 1880s, Studley Hall / Chinese gardens to be seen behind three set of columns / M.J. Slatterypostcards -- yarra river, postcards -- bridges. -- greater melbourne (vic.), victoria street bridge

Please refer to The Wood Library for further information about this piece. URL: https://www.woodlibrarymuseum.org/museum/item/664/jackson-laryngoscope Chevalier Jackson direct laryngoscope, with attached small light bulb inside the internal blade. Brass coated piece with a large size. This piece has a discoloured and beaten surface with visible hit marks, deformation at the back of the blade and green spots in handle area. The hand anatomic handle is faceted and designed with a thumb rest section at the angle. Welding sections are visible along the blade base external canal and handle attachment area. No inscriptions.Anychevalier jackson, laryngoscope, light bulb, brass