A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. All we known about Richard Routledge is that he was a tool maker and retailer that operated a business at either 23 or 64 Bull St Birmingham between 1869 to sometime in the early 20th century. There are many of his tools including decorative moulding planes of all sizes and designs for sale around the world and that his tools in particular moulding planes are well sought after by collectors of vintage tools. A vintage tool made by a little known maker, this item would have been made commercially for firms and individuals that worked in wood and needed a tool that could produce a ornamental finish to timber. At a time when to produce a decorative moulding for a piece of furniture, door trims etc. had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant tool from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Moulding plane round type Marked Routledge 64 Bull Street also stamped (JAS Burden owner)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it.A vintage tool made by an unknown maker, this item was made commercially for firms and individuals who worked in wood and needed a tool that could produce a ornamental finish to timber. These profiled planes came in various shapes and sizes to achieve a decorative finish. Although the item is marked J Dixon no reference can be found at this time for a maker of complex moulding planes J Dixon of London. The plane could have been made by an unknown maker and sold through a merchandising agent of which there was one in London at the time. It is this agent J Dixon that could have stamped his mark on the item and then sold the plane on giving the impression J Dixon was the maker, this practice was quite common in the 18th & 19th centuries. This item is still regarded as a significant tool from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Panel Plough Plane white wood, blade missing. Stamped "J Dixon London" also has the letter "B" stamped flagstaff hill, warrnambool, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, wood working, cabinet making, complex moulding plane, j dixon london, mouldings

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. All we known about George Davis is he and his successors made planes in Birmingham, England, from about 1821 to 1876. There are many of his tools including decorative moulding planes of all sizes and designs for sale around the world and that his moulding planes are well sought after by collectors of vintage tools. A vintage tool made by a known maker, this item was made commercially for firms and individuals who worked in wood and needed a tool that could produce a ornamental finish to timber. These profiled planes came in various shapes and sizes to achieve a decorative finish. This item is a significant tool from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Moulding plane centre bead, also called Single Bead Reeding Plane. Stamped maker G Davis Has GM inside W (owner) flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane, moulding, single bead reeding plane

A moulding plane is a specialised plane used for making complex shapes found in wooden mouldings that are used to decorate furniture or other wooden objects. Traditionally, moulding planes were blocks of wear-resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmaker's shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other workers to pull the plane ahead of the master who guided it. This item may be a one off item made by a cabinet maker for a particular project as the plane is not marked resulting in no history or manufacturing provenance available.A vintage tool made by an unknown maker, this item was made commercially and by individual cabinet makers for particular furniture projects that could produce an ornamental finish to timber. The tool was used before routers and spindle moulders came into regular use after World War l l, a time when to produce a decorative moulding for a piece of furniture, door trims, etc or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant early tool that today is quite rare and sought by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item.Plane, wooden, narrow blade. Noneflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, wooden plane, wood working tool, boat building tool, tool, woodwork tool, plane

Plane, wooden, handle missing. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, woodwork tool, boat building, carpentry tool, wooden plane, plane

Plane, wooden, large. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, woodwork tool, carpentry tool, plane, wooden plane

Clamp, wooden. Large hand made wooden screw clamp, with 2 wooden horizontal pieces and 2 wooden screws. (1 of a pair; see 3074.4) flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, clamp, wooden clamp, hand made clamp, 19th century clapm, woodwork tool

Clamp, wooden. Large hand made wooden screw clamp, with 2 wooden horizontal pieces and 2 wooden screws. (1 of a pair; see 3073.4) L 52 x W 27 x D 4cm flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, clamp, woodworking tool, carpentry tool, hand made clamp, 19th century clamp

This toolbox was originally part of the equipment on the barque Marjorie Craig, which brought New Zealand timber into Warrnambool from about 1908 to 1912 for the local merchants P J McGennan & Co. The toolbox was donated by a member of a local family connected with the La Bella rescue in 1905. The toolbox has carvings and markings that make it unique and connect it to the Marjorie Craig. The Craig Line of sailing ships was from Auckland, New Zealand, and traded in timber and some coal from New Zealand ports to Australia, including Sydney, Adelaide, Melbourne and Warrnambool. They returned with produce from Australia as ballast. In 1912 the Craig fleet included the Ihumata, Inga, Jessie Craig, Marjorie Craig, Louisa Craig and Joseph Craig. The steel barque Marjorie Craig, 500 ton, was built in 1891 as the 'Hirotha', in Ardrossan, Scotland for Norwegian owners. The ship was sold to Auckland’s Donald Ross and others in 1900, then in 1905 it was sold, registered by J.J. Craig in Auckland, New Zealand and renamed Marjorie Craig. Marjorie Craig’s commanders included Master R A Campbell in 1907, J MacFarlane in 1909 and Master R.G. Holmes in 1913. From February 1908, the Marjorie Craig was regularly seen in the Port of Warrnambool with loads of timber for merchants P J McGennan & Co. In February 1912 Marjorie Craig delivered white pine for P J McGennan & Co. In April of the same year, she brought 500,000 feet of timber for McGennan & Co and again in May 1912. On May 12 1912 Marjorie left the Port of Warrnambool with 500 tons of flour for New Zealand; it seems that this was her last time at Warrnambool. Prior to 1908, the vessel Speculant brought in timber from New Zealand for the McGennan firm. The Marjorie Craig had a strong reputation for being a ‘Fast Flyer’, breaking the sailing records for voyages between New Zealand and Australia. It was reported that she made passages with a speed equal to steamboats on several occasions. One of her records was from Warrnambool to Hokianga, NZ in eight-and-a-half days. The ship broke the record in October 1913 for the time from Adelaide to Auckland, sailing in 28 days, even with a damaged ship, and the owner presented Captain Holmes with a gold watch and chain. By the end of December 1913, the Craig Line’s last two surviving sailing ships, Marjorie Craig and Jessie Craig, had been purchased by Huddart, Parker & Co. Ltd. to work as coal hulks, one in Melbourne and one in Hobart.The toolbox is significant for being created for use in 1905 when the steel barque Marjorie Craig was purchased by J J Craig and given that name. The carved ships’ images and related inscriptions within the toolbox support the origin of the toolbox. The toolbox is significant for its association with the well-known Marjorie Craig, a frequent visitor to the Port of Warrnambool 1908 to 1912, a supplier of New Zealand timber for the local firm P J McGennan & Co, and one of the fastest inter-colonial sailing ships that broke numerous records for its speed including the fastest sailing from Warrnambool to Hokianga. Wooden toolbox from the ship Marjorie Craig. Wooden box, stained brown, decorative metal handles on sides, dovetailed joints, lid with metal and leather strap hinge, tapered feet and metal keyhole at front. Inscriptions are inside the box. Box contains newspaper clippings relating to sailing and maritime topics. A handwritten tag is attached to the box. Handwritten tag: "SAILING SHIP / MARJORIE CRAIG, EARLY 1900's / TOOL BOX / PORT OF W'BOOL”. Inside the lid is a carved silhouette of a 3-masted sailing ship with pink chalk lettering "M C" and "1912". Inside the front panel is "MARJORIE CRAIG". Inside the left panel is stamped a black oval with lettering inside.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, port of warrnambool, marjorie craig, flour export - warrnambool, toolbox, steel barpue, p j mcgennan & co, craig line, craig fleet, 1891, hirotha, donald ross, j.j. craig, r a campbell, j macfarlane, r.g. holmes

Green wooden shape used at powelltown Primary School, teachers aidsphere wooden teaching aid tool powelltown primary school shape

Square Wooden shape,used as a teaching toolsquare, wood school

Cube Wooden shapecube wooden teaching aid tool powelltown primary school shape

Marking Gauges have been around for centuries in wood working shops, and is used to mark parallel lines on wood, either along the grain or across the grain, across the grain leaves a more jaggard line.This simple tool allowed Crafts or Trades people to consistently and accurately make parallel lines.Wooden Marker Part 1 - Marker Part 2 - Wooden screw Part 3 - Moving .....wood worker, carpenter, cabinet maker, gauge, mark, joints, mortice & tennon

A wooden Mallet could be found in most homes, and nearly all tradesmans tool box or bag, its most common use was working with wooden handled wood Chisels, because they did not damage the end of the chisel like a steel headed hammer,also they were used to fit joints of wood together as they would not damage the timber like steel hammers......Wooden mallets were also used by stone masons back to the time of the pyramids, but they were usually shaped differentlyWooden Mallet A handmade wooden mallet with a handle with a rectangular head. Carved ET on sidewood, mallet, tradesman, carpenter, cabinet maker

This slate comes from the Glasgow Estate (Ellen Isabel Glasgow died in Warrnambool in 1971). It is presumed it was used by members of the Glasgow family. Slates such as this were used by all school children in Victoria (and presumably elsewhere) in the infant and younger age classes from the early days of the State until the early 1940s. It had the advantage of the work being able to be easily erased so that other work could be written. A slate pencil was used to write on this board.This is significant firstly as an example of past educational tools used by small children and so has important social significance as every school child of past generations would have used a slate. It is also important as it belonged to the Glasgow family. John Glasgow (c.1847-1925), at his property, Blackwood Hill, Wangoom, was a prominent cheese maker in the late 19th century and was one of the first shareholders and a member of the first Board of Directors of the Warrnambool Cheese and Butter Factory at Allansford. The dairying industry is of key importance in Warrnambool economic history.A slate made from quarry slate with permanent lines for handwriting with a wooden frame. The surface is much marked and scratched. Scratch marksschool slates, educational tools of the past

This ruler was distributed and sold as an advertising tool for the Warrnambool business of Swintons’ Pty Ltd. William and Ann Swinton were pioneer settlers in Warrnambool and established a grocery and general store in 1865 in Timor Street. Today the Swinton family still has business interests in Timor Street. It appears that this ruler was used in the crockery department of the Swinton general store in the 1920s. This ruler is of minor interest as a memento of the Swintons Timor Street store in the 1920s. Wooden rulers would have been used to a great degree in the 1920s, especially by school children. This is a wooden ruler with imperial measurements up to 12 inches. It is flat on one side and slightly curved on the other side. It has black printing on the top and handwritten black writing on the base. It has been well-used but is still relatively clean and legible.‘A Safe Rule Always Purchase at Swintons’ Pty. Ltd. Warrnambool Buy the Best Pay the Least.’ ‘Crockery Department 29/10/29’ swintons pty ltd, swinton family, warrnambool, history of warrnambool

This butter ram appears to have been made locally and was probably hand-made at a local factory. It was used to ram or mould butter into 56 pound butter boxes for bulk supply or for later cutting up into smaller quantities. Warrnambool was, and is still today, the centre of an important dairying industry with several large milk, cheese and butter factories in the area. The Warrnambool Cheese and Butter Factory at Allansford is the oldest operating factory of this type in Victoria and was established in 1888. The production of butter in the area was greatly accelerated by the invention of refrigeration in the early 1880s, enabling butter to be transported overseas. Warrnambool had two butter box factories which both closed in the 1920s. Up to the mid 1950s the production of butter was largely a hand process.This butter ram is of considerable interest as an example of the early tools used in the local butter industry.This is a heavy solid wooden block in a rectangular shape with the top shaped in the form of a pyramidal base. The edges of the base are worn from constant pounding. A long round wooden handle or rod is inserted into the top of the block. dairying industry in western victoria

A cutting or serrated tracing wheel with a wooden handle. The metal arm holding the cutter is inserted into the wooden handle. The circular cutter has sharp spikes (the serrating wheel) which turn. The box used to store the wheel: Oblong cardboard box with separate lid. Inscription on top part - black on green background: Nicholson File Co. / Port Hope Ont. / Mae in Canada/Patent / Increment Cut / Warranted / and made from / Best / File SteelCutting wheel: Side 1: B. Humphreys engraved into the metal section holding the spiked wheel. Side 2: Made in England Box: Hand written in black ink on the bottom of the box: "To Betty / with love/ from Gran" On bottom end of box: black on green background: Nicholson / Warding Bastard / 1 doz. 4 and a half inch.sewing tool, ron white

Old farm kitchen tool used for mincing meat manually.Used at Tawonga, in the Kiewa Valley, by resident Des WartonCast iron with dull smooth surface consisting of a tap to screw it onto a table, a barrel enclosing the auger that turns when the handle is wound around and forces the meat to spill out of a circular grinder. The hand crank is curved with a wooden knob . The outlet is oval shaped.Embossed on barrel: "Universal" Embossed on outlet "2" Embossed on handle "L.F. & c - New Britain Conn U.S.A."household tool, kitchen, meat mincer, grinder, universal no. 2

Used from the mid 1920s to mark timber so that it could be cut with a saw. It was an essential tool for carpenters.Used by Alan Tyers who worked for the State Electricity Commission of Victoria on the Kiewa Hydro Electric Scheme.Carpenter's essential equipment. Used for marking timber so it can be cut with a saw. Wooden screw on the side allows the square wooden block to slide along the length of wood which is almost square at the end but with 2 flat sides and 2 rounded sides. Plated with 2 strips of brass on the square block. Sold for 1/3 in the 1920s. There is a nail through one end. carpenter, cabinet maker, secv, tool, marples, marking gauge

This tool is used to clamp and hold pieces of timber together during the process of joining or compressing two pieces of timber together. The first block is stationary and attached to the end of the base while the second block moves with the turning of a long screw. It is used also in the process of bookbinding with a similar holding intent.An interesting object with a specific purpose which is still in working order.Wooden triangular shaped block which is divided in two pieces with one piece being moveable with the turning of a turned wooden screw device. It is quite heavy which would suggest that the timber is quite dense warrnambool, wood press, mitre press, book binding press,

These saws date from about the early 20th century and would have been used to cut timber in the days before the advent of machine-operated saws. They are of a simple design and could easily be hand made.These tools are of interest as examples of tools used over a hundred years ago. .1 Two-person saw with wooden curved sides, two wooden pieces attached across the sides, a metal blade at the bottom and a metal piece across the top to keep the tool rigid. .2 as .1 abovevintage tools, warrnambool & district historical society collection

This is a framed photograph showing a key event in Warrnambool's history - the proclamation by Sir Arthur Stanley of Warrnambool as a city in 1918. Warrnambool was the fifth non--metropolitan town in Victoria to be declared a city and a large crowd gathered outside the Town Hall to see this event. Sir Arthur Stanley (Lord Stanley of Alderley) was an English nobleman, Parliamentarian and soldier who was the Governor of Victoria from 1914 to 1920. The photographer was Arthur Jordan who, like his father Joseph, was a prominent photographer in Warrnambool at the end of the 19th and the beginning of the 20th centuries and took many official photographs of civic affairs. The donor of the photograph, probably immediately after the event to the Warrnambool Museum at the time under the auspices of the Warnambool Mechanics' Institute, was George Mackay, a prominent Warrnambool lawyer, Councillor and Mayor. He was probably responsible for the framing of the photograph.This is a significant photograph as it is a record of an important event in Warrnambool's history and is a great research toolThis is a black and white photograph in a polished wooden frame with a card inset and a glass covering. The photograph shows the Governor of Victoria, Sir Arthur Stanley, in civilian dress standing on a platform outside the Warrnambool Town Hall proclaiming Warrnambool a city. Behind the Governor on the platform are many men and some women and in the foreground left is a band and in the foreground centre are Army school cadets. The photograph frame has a wooden backing with a piece of wire attached for hanging the object. In the photograph also is a columm with a sign on it.His Excellency the State Governor Sir Arthur Stanley Proclamation- Warrnambool a City 23rd May 1918 Warrnambool Museum & Art Gallery Presented by G.S.Mackay Warrnambool Arthur Jordanwarrnambool -a city in 1918, sir arthur stanley, george s. mackay, arthur jordan

This medical aid was popular in the late 19th and early 20th centuries. It was used as a massaging and vibratory tool and was recommended for the relief of all sorts of complaints, including colds, digestive complaints, rheumatism, headaches, female hysteria, tumours, lung diseases and even ‘double’ chins.This massager is of considerable interest as a medical aid that was popularly used to treat many kinds of ailments in the late 19th and early 20th centuries. It is indicative of the popularity at that time of vibratory or massaging objects that were used to aid in the relief of many ailments for which there were few other remedies at the time.This is a medical instrument with a metal shaft in three sections and a circular piece of metal at the end. The metal piece has a turning handle at one end and a cross metal piece at the other end. This cross piece has a metal cup with a covering piece of stiff rubber at one end and a circular piece of rubber at the other end. At one end of the metal shaft is a wooden handle. Some of the metal is rusted and the rubber ball has been split.‘Vee Dee Patent No….’ ‘1…2…3…’ ‘J. E. Garratt, London 124 Southwark Street S.E.’ antiquarian medical aids, history of warrnambool

This tool appears to have been hand-assembled. It would have been used on a farm or saw mill or any place of work or home requiring wood to be cut up. This tool has no known local provenance but is retained as an example of a tool used 100 years ago or more,This is a metal small axe or wood splitter with a wooden handle. The metal section is pitted and worn and the oval-shaped handle is partly split and worn. vintage hand tools, wood splitter, history of warrnambool

This hack saw would have been used to cut metal. The blades were interchangeable according to the requirements of the job. The item could have been used on a farm or in industry. This item is retained as a good example of a tool commonly used in past times.This is a hack saw. It has a metal frame in a D shape with a metal blade on the straight side affixed with screws. The blade is finely serrated. Attached to the metal frame is a wooden handle. This hack saw also has an extra blade attached to the fixed blade with a piece of wire flex. The metal is somewhat rusty and the wooden handle is worn. vintage hand tools

This small cross cut saw, with a home-made handle, would have been used to fell small trees or cut timber and was designed to be used by one person. Cross cut saws derive from ancient times but came into general use in the 15th century. Those used to fell large trees or cut large pieces of timber were operated by two people. Cross cut saws today have been mostly replaced by electric chain saws. This is a small cross cut saw. It has a metal blade with large serrations or teeth and a metal piece affixed to the blade with screws. A wooden handle has been fitted into the end metal piece in an upright position. The metal is pitted and rusted and the handle is rectangular-shaped tapering down at the end where it is affixed to the metal. vintage tools, warrnambool

This saw is used for cutting curved edges of timber. It could have been used in the home or for commercial building purposes. The hand-held saw has largely now been replaced by electrically-operated machines. This item has no known local provenance but it is an interesting example of a hand-held tool of the past.This is a hand saw with a thin serrated metal blade. The blade is affixed to the bottom end of a wooden frame with two upright pieces and a cross piece affixed to the upper part of the frame. The top part of the frame has a piece of plaited rope stretched across. The top part of the frame has two wooden handles. The blade is somewhat rusted and the wooden parts and the rope are stained. vintage tools, history of warrnambool

This wood plane would have been used in the past both in industry and in the home. It is an early example of a plane and has antiquarian interest. This item has no known local provenance but is retained as a good example of a vintage tool used in the past by carpenters and handymen. This is a metal tool for planing wood. It has a rectangular wooden base and two side bars for adjusting the length and angle of the blade. The tool has several metal wing nuts and screws and a wooden handle. The metal is much rusted. ‘Trade Mark 45’carpentry tools, history of warrnambool