The School of Mines was established in 1870 in Ballarat, making it Australia's third oldest tertiary institution. Redmond Barry was its first president, and he was involved in the creation of university degree level courses for the school. The School of Mines was divided into a tertiary division and a technical division. The tertiary division provided higher education courses such as mining engineering, geology, education and business studies, while the technical division provided such programs as wool classing, plumbing and bricklaying.It remained in that form until the 1967 when it was split into three institutions, Ballarat School of Industries, Ballarat Technical School, and Ballarat Institute of Advanced Education. They remained three entities until 1976. Ballarat Institute of Advanced Education merged into Ballarat College of Advanced Education. The Ballarat School of Industries and Ballarat Technical School merged into the School of Mines and Industries, Ballarat (SMB) in 1976. Several entities merged or had arrangements with SMB. In 1994, a memo of understanding (MOU) was signed between SMB and the Ararat Technical School, which was founded in 1969. Then, in 1998, SMB and the Horsham-based Wimmera Institute of TAFE (1984), dating back to 1882, merged into the University of Ballarat to create a larger University. Green woollen, mostly unlined (apart from the upper back and sleeves) blazer with embroidered emblem on breast pocket. The edges are bound including the three pockets and the sleeve cuff 9 cm from the edge. There are three green buttons at the front. The internal edges are overlocked and there is a panel stitched to the inside where the top of the side pockets are stitched. Embroidered patch on breast pocket.ballarat school of mines, blazer, coat of arms, costume, textiles

The School of Mines was established in 1870 in Ballarat, making it Australia's third oldest tertiary institution. Redmond Barry was its first president, and he was involved in the creation of university degree level courses for the school. The School of Mines was divided into a tertiary division and a technical division. The tertiary division provided higher education courses such as mining engineering, geology, education and business studies, while the technical division provided such programs as wool classing, plumbing and bricklaying.It remained in that form until the 1967 when it was split into three institutions, Ballarat School of Industries, Ballarat Technical School, and Ballarat Institute of Advanced Education. They remained three entities until 1976. Ballarat Institute of Advanced Education merged into Ballarat College of Advanced Education. The Ballarat School of Industries and Ballarat Technical School merged into the School of Mines and Industries, Ballarat (SMB) in 1976. Several entities merged or had arrangements with SMB. In 1994, a memo of understanding (MOU) was signed between SMB and the Ararat Technical School, which was founded in 1969. Then, in 1998, SMB and the Horsham-based Wimmera Institute of TAFE (1984), dating back to 1882, merged into the University of Ballarat to create a larger University. Green woollen, unlined blazer with embroidered emblem on breast pocket. The edges are bound including the three pockets and the sleeve cuff 9 cm from the edge. There are three green buttons at the front. The internal edges are bound and there is tape stitched to the inside where the top of the side and breast pockets are stitched. Embroidered patch on breast pocket. Makers woven tags.ballarat school of mines, blazer, coat of arms, school uniform, costume, textiles

The School of Mines was established in 1870 in Ballarat, making it Australia's third oldest tertiary institution. Redmond Barry was its first president, and he was involved in the creation of university degree level courses for the school. The School of Mines was divided into a tertiary division and a technical division. The tertiary division provided higher education courses such as mining engineering, geology, education and business studies, while the technical division provided such programs as wool classing, plumbing and bricklaying.It remained in that form until the 1967 when it was split into three institutions, Ballarat School of Industries, Ballarat Technical School, and Ballarat Institute of Advanced Education. They remained three entities until 1976. Ballarat Institute of Advanced Education merged into Ballarat College of Advanced Education. The Ballarat School of Industries and Ballarat Technical School merged into the School of Mines and Industries, Ballarat (SMB) in 1976. Several entities merged or had arrangements with SMB. In 1994, a memo of understanding (MOU) was signed between SMB and the Ararat Technical School, which was founded in 1969. Then, in 1998, SMB and the Horsham-based Wimmera Institute of TAFE (1984), dating back to 1882, merged into the University of Ballarat to create a larger University.Bottle green, size 18 poly cotton machine knit windcheater with yellow SMB name. It has knit rib fabric at the bottom, neck and cuffs.Printed in yellow - SMB, logo and School of Mines and Industries Ballaratwindcheater, costume, uniform, textiles

This badge was used by Hester Clara Darby, teacher at the Ballarat School of Mines. Hester joined the staff of SMB as an assistant to senior Commercial classes in April 1916. On 01 February 1921 she was appointed a lecturer in Commercial Correspondence and Office Routine. She taught the 'Touch' Method of typing, Commercial Correspondence, Shorthand and Office Routine. Tertiary education at Ballarat began with the establishment of the School of Mines in 1870, making it Australia's third oldest tertiary institution. Classes began in surveying, mathematics, chemistry and a decade later they included metallurgy, assaying and geology. The technical division provided such programs as wool classing, plumbing and bricklaying. In 1967, it was split into three separate institutions, Ballarat School of Industries, Ballarat Technical School, and Ballarat Institute of Advanced Education. Then in 1976 the Ballarat Institute of Advanced Education became into Ballarat College of Advanced Education. The Ballarat School of Industries and Ballarat Technical School became the School of Mines and Industries, Ballarat (SMB). In 1998, the Ballarat School of Mines and Industries and the Horsham-based Wimmera Institute of TAFE merged with the University of Ballarat. The university merged with Monash University's Gippsland (Churchill) campus in 2013 and the merged schools are now the Federation University AustralialBallarat School of Mines Badge made of gold coloured metal with blue and green enamel.On face - Ballarat School of Mines, Ingenio Effodere Opesballarat school of mines badge, badge, coat of arms, hester clara darby, hester darby

Graham Willey was a School of Mines Ballarat student from 1953-55. He was awarded the 1955 Honour Blazer. The School of Mines was established in 1870 in Ballarat, making it Australia's third oldest tertiary institution. Redmond Barry was its first president, and he was involved in the creation of university degree level courses for the school. The School of Mines was divided into a tertiary division and a technical division. The tertiary division provided higher education courses such as mining engineering, geology, education and business studies, while the technical division provided such programs as wool classing, plumbing and bricklaying.It remained in that form until the 1967 when it was split into three institutions, Ballarat School of Industries, Ballarat Technical School, and Ballarat Institute of Advanced Education. They remained three entities until 1976. Ballarat Institute of Advanced Education merged into Ballarat College of Advanced Education. The Ballarat School of Industries and Ballarat Technical School merged into the School of Mines and Industries, Ballarat (SMB) in 1976. Several entities merged or had arrangements with SMB. In 1994, a memo of understanding (MOU) was signed between SMB and the Ararat Technical School, which was founded in 1969. Then, in 1998, SMB and the Horsham-based Wimmera Institute of TAFE (1984), dating back to 1882, merged into the University of Ballarat to create a larger University.This three quarter lined, 3 buttoned, bottle green woolen blazer is edged in black twill piping and has a SMB badge on pocket "XVII ATH. XI Honor 1955 S.R.C." The 2 side pockets are also edged in the black twill and there is a trim of the twill 8.3cm from the sleeve cuff. The breast pocket has a top binding of yellow and green diagonal stripes. Cloth label - Messer & Opie Ballarat On embroidered badge "Incenio Effodore Opes", "XVII ATH XI Honor 1955 S.R.C."blazer, honor blazer, harold john hassell, smb, school of mines ballarat, graham willey, costume, textiles, coat of arms

In 1940 Harold John Hassell was a 4th year student in the Science school. He won the Mica Smith Trust Fund (open championship) and was awarded the 1940 Honour Blazer. The School of Mines was established in 1870 in Ballarat, making it Australia's third oldest tertiary institution. Redmond Barry was its first president, and he was involved in the creation of university degree level courses for the school. The School of Mines was divided into a tertiary division and a technical division. The tertiary division provided higher education courses such as mining engineering, geology, education and business studies, while the technical division provided such programs as wool classing, plumbing and bricklaying.It remained in that form until the 1967 when it was split into three institutions, Ballarat School of Industries, Ballarat Technical School, and Ballarat Institute of Advanced Education. They remained three entities until 1976. Ballarat Institute of Advanced Education merged into Ballarat College of Advanced Education. The Ballarat School of Industries and Ballarat Technical School merged into the School of Mines and Industries, Ballarat (SMB) in 1976. Several entities merged or had arrangements with SMB. In 1994, a memo of understanding (MOU) was signed between SMB and the Ararat Technical School, which was founded in 1969. Then, in 1998, SMB and the Horsham-based Wimmera Institute of TAFE (1984), dating back to 1882, merged into the University of Ballarat to create a larger University.This three buttoned, bottle green woolen blazer is edged in black twill piping and has a Ballarat School of Mines coat of arms on pocket "Honor 1940 ATHS - XVIII. The two side pockets are also edged in the black twill and there is a trim of the twill 8.3cm from the sleeve cuff. The breast pocket has a top binding of yellow and blue stripes. The seams are hand stitched down to prevent fraying and there are tapes hand sewn on the inside across the back of the pockets to prevent tearing. Cloth label - Mark & Philp Pty Ltd On embroidered badge "Incenio Effodore Opes", Honor 1940 ATHS - XVIII"blazer, honor blazer, harold john hassell, smb, school of mines ballarat, costume, textiles, uniform, embroidery

In 1947 Percy Everett, Chief Architect for the Victorian Government, drew up plans to accomodate the growth in student numbers on the Ballarat School of Mines site. It was an era of government buildings surrounding the Ballarat School of Mines campus either being transfered to the school or foreshadowed for transfer. In 1947 two Red Cross huts were transferred from Victoria Park to the western side of the former Ballarat Supreme Court (later Courthouse Theatre) for use by Wool Classing and Motor Mechanics. In the same year additional facilities were provided for Pottery due to the increase in enrolments and a large brick classroom was built at the rear of the Ballarat Junior Technical School Building. In the annual report of 1947 the President said: "These transfers are, however, only temporary expedients and indicate the pressing need for more buildings of a permanent nature". By the end of the year the School Council decided to request the Education Department of Victoria to proceed with the implementation of the School's long-range plan whch had received approval earlier and to treat it as an urgent post-war requirement. After much communication a plan for a six-storied building, flanked by two three storied buildings was planned to be built on the site of the Ballarat Gaol was developed. The plan was sent to the Education Department for the Minister's Approval. It is not know if approval was granted, but the building did not proceed, possibly becausse the Ballarat Gaol was still very miuch in use. When a tertiary division of the Ballarat School of Mines was being developed in 1967 it corresponded with the closure of the Ballarat Gaol. It was determined that the Lydiard Street South site had no room for future growth so a new campus was sought. The new campus was purchased at Mt Helen, and was initially known as the Ballarat Insittute of Advanced Education. In 1976, when the Ballarat Teachers' College merged into the structure, the campus became known as the Ballarat College of Advanced Education and it was no longer a part of the Ballarat School of Mines. Plans for a proposed building to replace the Ballarat Gaol buildings. The proposed building was never built, the concept being replaced by a new teritary facility at Mt Helen. buildings, percy everett, ballarat school of mines battery, ballarat technical art school, engineering workshops, machine shop, ballarat junior technical school, architectural plans, ballarat school of mines, smb campus

Male wool shirt made in Bradford, U.K. The shirt is cut from first fabric woven from 100% traceable Australian wool. Bradford Mills differ to Australian mills in that the entire process of producing worsted material does not take place at the one firm/factory. Rather it is split between many firm/factories specialising in their task in the production of worsted material. For example, the wool goes from merchants to combers to produce tops, the tops to spinners to produce yarn and then the yarn is sold to manufactures who weave it into cloth. After the weaving is done the cloth has to be sent to the dryers and finishers, who scour, dye and finish the cloth. Finally, the finished cloth is purchase by a fresh set of merchants, who will later sell the cloth elsewhere in England or abroad. At each these steps a new firm is handling the wool/cloth making it hard to track lineage of wool through this process and hence hard to guarantee 100% Australian wool. This shirt was purchased and worn by the donor’s husband, George H. Gerber, an Australian Wool Buyer. The shirt was purchased on one of George’s trips to Bradford in the U.K. on company business. Gerber was a second-generation Wool Traders in his family. His father, also named George H. Gerber, worked for Kreglinger & Furneau. He worked for them in Boston, U.S.A. before he died from the Spanish Flu in 1918. The company then promised a job to his oldest son (donor’s husband) once he finished school. Thus, George came to be trained as a Fine Wool Classer by Kreglinger & Furneaux (Aust.) Pty Ltd where he was employed as a Wool Buyer all his working life. He retired in 1969 as the head of their Australian office when the company was taken over Also of note, the shirt was sold with 2 add-on collars. Having additional collars was advantageous as changing only the collar increased the number of days the shirt could be worn without washing. Cream coloured shirt with black and red single thread verticle stripes.“Grandpa” collar (with 1 of its 2 supplied add-on collars included). French cuffs. Sold with 2 add-on collars, hence both ends of the collar have buttonholes to take a stud, and a partially-opened button-hole is at the centre of the neck on the outside of the collar for a second stud.Letering label on shirt: GENT’S OUTFITTER Herbert Winfield 23 CHEAPSIDE, BRADFORDbradford, u.k, kreglinger & furneaux (aust.) pty ltd, 100% australian wool

Ford and McFarlane shearing handpiece c.1890. This shearing handpiece is from ‘Wellington Lodge” in Tailem Bend, South Australia. Wellington Lodge today is an Angus beef farm; however, the property has a long history which includes wool farming. Wellington Lodge has been in the McFarlane family since the 1840’s and was originally around 19000 acres. The donor, Brian Licence, assembled this handpiece out of spare parts he found while classing wool on the property in the 1960s. Brian showed the finished handpiece to the owners once his classing work was completed and was told he could keep the handpiece as a souvenir. Brian also classed wool at “Jockwar” and “Pleasant Park” in Penola for members of the McFarlane family during the 1960s. The handpiece is named after Ford, the name of the engineer who designed the handpiece and McFarlane, the owners of Wellington Lodge Station and employers of Ford. This handpiece was developed as a prototype for use on the property. The handpiece which is made of solid brass is in a “used condition” and has been patched with solder. The handpiece is stamped with the number 10. Internally, the handpiece is powered from a drive mechanism of compressed air, this compressed air was typically produced by burning mutton fat. The handpiece comes from the pre-electrical– steam engine era of shearing. Brass metal shearing handpiece. A three-pronged fitting to hold both the comb and the blade protrudes from one end. A cylindrical stem extends vertically from the other. This is likely where a connecting rod to the shearing plant would be found. Below this vertical stem, the handpiece has an additional threaded hose fitting. This is likely where compressed air was delivered into the handpiece. The inscriptions can be found on the rear, near the previously mentioned vertical stem. Around this stem is also where the repairs of solder can be found. These repairs are unique to this handpiece and are not common practise.Etched. Base of handle. “FORD & McFARLANE . SHEEP SHEARER . Etched. Base of handle. “10”sheep shearing, shearing equipment, ford & mcfarlane, wellington lodge, tailem bend, south australia, shearing handpiece, shearing

This photograph shows Growers Ian Appledore, Kaye Appledore and Murray Appledore, Wool Manager Keith Jackson, Wool Classer Phillip Gibson, Geoff Allibon and Brendan Dart posing with the million dollar bale after it was sold on 11th January 1995 in Geelong. The wool was shorn from sheep of the Wyndarra and Rockbank bloodlines. A flock of 290 sheep were kept undercover at Kadinia, the property of the Appledore family from Brim in the Wimmera district of Victoria. Their record-breaking wool was produced by giving the sheep a special diet and providing each one with a UV-protective coat. Around 180 fleeces were selected for the million dollar bale. The sale of the first bale of wool measuring below 14 microns was held in the Auction Room here at the National Wool Museum. Bidding began at 40,000 (cents a kilogram) and steadily increased until there were only two bidders left. The bidders represented the Japanese firm Aoki International and Loro Piana of Italy. The hammer fell at 1,030,000 cents per kilogram, with Aoki International paying $1,194,800 for the 116kg bale. The fleece was scoured (cleaned) at the Goulburn Wool Scour, New South Wales. The degree of preparation and care taken with the task was extreme. The Scour closed production three days before and was extensively cleaned. On the day of scouring 12 tonnes of 17 micron wool was washed to condition the water, then nine bales of extra super fine wool, worth over $300,000 was washed as a trial run. Toabo Agaki Japan was employed to process the scoured wool into suit cloth. Taobo required the scoured wool to contain 0.5% residual grease, 12% moisture and a yield of 83kg. These requirements were met. The entire staff of the Scour wanted to be part of washing the best wool in the world. Without asking for payment both the night shift and afternoon shift crews assisted the day shift in the task. The bale was fed into the scour in seven minutes and fitted into three bowls, half the scour. It completely disappeared into the dryer and the last wool was fed before the first wool was out. The clean wool was hand-packed into cardboard cartons and freighted to Japan. Aoki International, based in Yokohama Japan, cut three suit lengths from the cloth, then blended the remaining wool into an exclusive line of commercially-available suits. These suits are labelled Kadinia.Colour photograph showing three six men and one woman standing around a bale of wool.michael crooks, auctioneer, wool industry, million dollar bale, geelong, auction, kadinia, appledore, keith jackson, sale room, geelong wool centre

The Working Men’s College was founded in 1881 by a prominent grazier and philanthropist, The Hon. Francis Ormond, who donated £5000 towards the establishment of the college. The Council of the Melbourne Trades Hall then matched Ormond's initial donation by rallying its members. On 4 June 1887, the college opened in its purpose-built building on the corners of Bowen Street and La Trobe Street in Melbourne, with a gala ceremony. It became the third official provider of higher education in the new Colony of Victoria (the Melbourne Athenaeum was founded in 1839 and the University of Melbourne in 1853). The college was the predecessor to the current-day Royal Melbourne Institute of Technology (RMIT University). Adjoining the college in the 1890s were the Supreme Court of Victoria (later the Melbourne Magistrates' Court) and the Melbourne Gaol - both which are now part of RMIT today. A list of Scholarship Governors and Life Governors is included. The former have donated 250 Pounds Sterling and upwards, the later have donated 20 Pounds and over but less than 250 Pounds Sterling. The Patron of The Working Men's College was His Excellency The Right Honourable Lord Brassey. The President of the Council was Professor W C Kernot. The majority of classes were at night and on Saturdays. Tan soft covered book of 112 pages. The thirteenth edition of the Working Men's College (later Royal Melbourne Institute of Technology [RMIT]). It inlcudes the following photographic images: Main Building, Assaying, 1899 council (W.C. Kernot, W.H. Embling, Thomas smith, F.H. Bromley, John Reid, R.H. Solly, E. Findley, D. McIvor, James Robb, John Hancock, C.E. Oliver, A.J. Arnot, James Smith, Joseph Nixon, R.L.Jellery. C.S. Paterson), UNveiling the Ormond Statue, Victorian Lead and Shot Works, Francis Ormond, Telegraphy room, Lecture Theatre, photography, painting class, wool sorting, plumbing, Remington typewriter, W. Ison, H.D. Evans, library, Verdon prize, Denton Hat Mills. working men's college melbourne, rmit, w.c. kernot, w.h. embling, ormond statue, f. ormond, electricity, surveying, architecture, photography, assaying, dressmaking, veterinary science, plumbing, letterpress printing, w. ison, h.d. evans, library, denton hat mills, literary and commercial department, typewriting department, languages, telegraphy, department of music, department of mathematics, department of engineering, 'department of architecture, department of art and applied art, department of mining and metallurgy, department of chemistry, department of household economy, department of agriculture and rural industries, woodworking, carpentry and joinery, turning and fitting, coachbuilding and carriagedrafting

Augustus Bostock was the 9th child of Robert & Rachael Bostock of Vaucluse Epping Forest, Van Diemen’s Land. He was only 4 years old when his mother died. He was inspired by his father to seek his fortune in the Western District of Victoria. He arrived around 1850. He married Margaret Aitkin in July 1865. Augustus owned several properties in the district and leased others. He sat on the court of Warrnambool, Mortlake or Hexham as required. He resided at Marramook in Hawkesdale and later moved to Vaucluse in Hopetoun Road Warrnambool, where he died in 1920 at the age of 87. He was involved in many aspects of life in the Western District, racing, cricket, and social activities to name a few. Earlier correspondence in this collection records Augustus making contact with manager of Delatite Station in regard to wool and sheep classing. This letter also relates to sheep apart from the genialities of the time.This is one of a number of documents which relate to the Bostock family who were one of the most important pioneering families of the Western District. They owned and leased various properties around Warrnambool and were involved in many aspects of social and business life. The document itself is indicative of its time and provides an insight into social contacts and customs at the time.Cream lined paper with black ink handwriting. Two pages Delatite Mansfield 2nd June 1900. Signed G Macartneywarrnambool, augustus bostock, bostock, delatite,1900,

Augustus Bostock was the 9th child of Robert & Rachael Bostock of Vaucluse Epping Forest, Van Diemen’s Land. He was only 4 years old when his mother died. He was inspired by his father to seek his fortune in the Western District of Victoria. He arrived around 1850. He married Margaret Aitkin in July 1865. Augustus owned several properties in the district and leased others. He sat on the court of Warrnambool, Mortlake or Hexham as required. He resided at Marramook in Hawkesdale and later moved to Vaucluse in Hopetoun Road Warrnambool, where he died in 1920 at the age of 87. He was involved in many aspects of life in the Western District, racing, cricket, and social activities to name a few. This letter is written in reply to an earlier one by Augustus making himself available to do wool and sheep classing. This states of the availability of work at Delatite Station the property of Mr. Henry Ricketson one of many properties he owned.This letter follows from previous ones showing Augustus Bostock in his quest for work. Cream lined paper with Australian Mortgage Land and Finance letterhead printed at top of letter. The letter is handwritten in black ink with adjustments written in same hand as the signer of the letter. Blue secretary stamp underneath signature.Addressed to Augustus Bostock Esq Marramook Woolsthorpe. Signed by Robert **Boyne. Dated May 15th 1900. Watermarked, Original Turkey Mill Trent. augustus bostock, warrnambool

Uniform issued to "LOCKYER" 114493.Jacket - khaki colour wool serge fabric, Battle dress style, belted at waist with metal buckle. Dark green plastic buttons. Collar, shoulder epaulettes, two front pockets with concealed button down flap and sleeve cuffs. Shoulder epaulettes - rank three pips, red, cream and brown embroidery for Captain. Shoulder sleeve insignia, red fabric with dark blue embroidered lettering. "ROYAL AUSTRALIAN ARMY/ ORDNANCE CORPS". Green colour cotton twill fabric pocket and waist lining, manufacturers white cor=tton label inside pocket lining. 2. Trousers - khaki colour wool serge fabric, Battle Dress style, with fob pocket, two side pockets, one back pocket with concealed button down flap. Green colour polyester fabric lining with manufacturers white cotton label inside on back pocket, 6 button fly. Manufacturers information on labels - black ink print. 1. "A.G.C.F./ VIC 1977/^ /8405.66.025.6423/ SIZE OF CHEST/ SIZE 109/ 112PR/ YARRA FALLS 69/ BATCH, 21657/ DRY CLEAN ONLY/ CREASE UPPER/ HALF OF LAPELS ONLY/ NO./ NAME" Handwritten - blue ink pen - "LOCKYER/ 114493". 2. CONWAY BROS. PTY LTD/ ADELAIDE ^ 1968/ CLASS 8405-66-025-6199/ Y.F. PP2/ SIZE & WAIST 41PR/ MATCHING JACKET 43/44 P.R. / Dry Clean only/ Repress on original seams/ Creases set by Si-ro-set./ mending patch attached/ NAME/ ARMY NO." Handwritten black ink pen "LOCKYER/ 114493"uniform, army, battle dress, lockyer

1. Jacket, Khaki wool/polyester fabric. Service Dress style. Gold colour plastic buttons with shank and metal split ring. Buttons have raised emblem - Rising Sun Emblem. Collar, shoulder epaulettes, four front pockets with button down flap. Left sleeve - oval patch Rising Sun Badge, patch crossed Rifles, patch Australian Coat of Arms - Warrant Officer. Right sleeve - patch - Parachute Wings, patch, Australian Coat of Arms - Warrant Officer, 1st Class. Khaki colour polyester fabric lining with white cotton manufacturers label inside left side. 2. Trousers, khaki wool/polyester fabric. Service Dress Style, with fob pocket, two side pockets, one back pocket with button down flap. Plastic buttons, metal zipper fly, Khaki colour polyester fabric waist and pocket lining. White manufacturers label back pocket. 3. Shirt, Khaki colour cotton/polyester fabric, long sleeves, shoulder epaulettes, two front pockets with button down flap. Plastic buttons. White cotton manufacturers label, back, below collar. 4. Necktie - khaki colour wool/polyester fabric with polyester fabric lining tie. Two manufacturers labels - black and white cotton with black ink print. 5. Belt - black webbing with brass buckle and keepers. Emblem on reverse sides of buckle. Manufacturers Information on label - black ink print. 1. ADA/MADE IN CHINA/ OCT 2016/ CC30BK/ ^/ NSN: 8405 66 162 6289/ SIZE 105S/ NAME:/ PM KEYS NO:/ OUTER 60% WOOL/ 40% POLYESTER/ LINING/ 100% POLYESTER/ DRY CLEAN ONLY/ DO NOT WASH/ IRON UNDER DAMP CLOTH/ WARM IRON". 2. As above with NSN: 8405 66 162 6077" 3. 'ADA/100M/ NSN 8405 66 088 7104/ SIZE??/ NAME/ SERVICE NO./65% POLYESTER/ 35% COTTON/ MADE IN AUSTRALIA" 4. "ADA" ADA/ MADE IN CHINA/ MAY 2016/ 60% WOOL/ 40% POLYESTER/ DRY CLEAN ONLY" 5. Etched emblem on buckle "^". uniform, army, service dress

1. Shirt - light khaki colour cotton/polyester fabric. Long sleeves, shoulder epaulettes, two front pockets with button down flap. Plastic buttons. Left sleeve - oval fabric patch embroidered Rising Sun Badge "THE AUSTRALIAN ARMY" - fabric patch, embroidered, crossed rifles. Right sleeve - fabric patch embroidered, Parachute Wings. Left and Right sleeve fabric patch embroidered, Australian Coat of Arms - Warrant Officer, 1st Class, white cotton manufacturers label below collar - illegible. 2. Trousers, Khaki colour wool/polyester fabric. Service Dress style with fob pocket, two side pockets, one back pocket with button down flap. Plastic buttons, metal zipper fly, khaki colour polyester fabric waist and pocket lining. White cotton manufacturer's label back pocket. 3. Necktie - khaki colour, polyester/viscose fabric with polyester fabric lining, necktie manufacturer's label - black cotton with white print.uniform, army, service dress

1. Shirt - light khaki colour cotton/polyester fabric - short sleeves, shoulder epaulettes, two front pockets with button down flap. Plastic buttons. Left sleeve - oval fabric patch, embroidered "Rising Sun Badge" "THE AUSTRALIAN ARMY" - fabric patch, embroidered, crossed rifles. Right sleeve - fabric patch, embroidered, Australian Coat of Arms - Warrant Officer 1st Class. White cotton manufacturers label, back, below collar - illegible. 2. Trousers, Khaki colour wool/polyester fabric. Service Dress style with fob pocket, two side pockets, one back pocket with button down flap. Plastic buttons, metal zipper fly, khaki colour polyester fabric waist and pocket linng. White manufacturers label back pocket lining. Manufacturers information on label: black ink print. 2. "ADA 4500299219/ 2005/ NSN: 8405 66 140 7088/ size w.82il 78/ name/ service no./ 50% wool 50%/ dry clean only (P)/ repress on original/ creases, damp cloth/ or medium to hot/ steam iron/ MADE IN AUSTRALIA"uniform, army, service dress

1. Shirt - light Khaki colour cotton/polyester fabric. Short sleeves, shoulder epaulettes, two front pockets with button down flap. Plastic buttons. Left sleeve - fabric patch, embroidered Rising Sun Badge "THE AUSTRALIAN ARMY". Fabric patch, embroidered 'Crossed Rifles'. Right sleeve - fabric patch, embroidered, 'Parachute Wings'. Left and right sleeves, fabric patch embroidered, Australian Coat of Arms. Warrant Officer, 1st class. White manufacturers label, back below collar. 2. Trousers, khaki colour wool/polyester fabric. Service dress style with fob pocket, two side pockets, one back pocket with concealed button down flap. Plastic buttons and metal zipper fly khaki colour polyester fabric lining waist and pocket lining. White cotton manufacturers label back pocket lining. Manufacturers information on labels - black ink print. 1. "ADA/4500297929/FEB 2006/ NSN: 8405 66 133 5954/SIZE: 39/NAME/ SERVICE NO/ 65% POLYESTER/ 35% COTTON/ MADE IN AUSTRALIA" 2. "ADA/ VIC 1996/ ^/ 8405 66 ?? 7101/ SIZE 90T/ NAME/ SERVICE NO/ 50% WOOL/ 50% POLYESTER/ DRY CLEAN ONLY/ REPRESS ON ORIGINAL/ CREASES/ USE DAMP CLOTH OR / MEDIUM TO HOT/ STEAM IRON.uniform, army, service dress

Trousers - Khaki, wool serge fabric, plastic buttons, five buttons, fly, fob pocket, two side pockets, one back pocket with flap. Lining - cotton and polyester fabric. Cotton manufacturers label, inside on back pocket lining, with black print information.Cotton label information - black ink print. "CONWAY BROS. PTY LTD/ ADELAIDE 1969/^/ CLASS 8405-66-025-6188/ SIZE WAIST 325/ MATCHING JACKET 37-395/ DRY CLEAN ONLY/ RE-PRESS ON ORIGINAL SEAMS/ Creases set by Si-va-set/ mending Patch attached/ NAME/ ARMY NO". NAME - HANDWRITTEN ON LABEL - BLACK INK - ILLEGIBLE.uniform, army, battle dress trousers

Trousers - khaki, wool serge fabric, plastic buttons, five button fly, fob pocket, two side pockets, one back pocket with button down flap. Lining cotton and polyester fabric. One manufacturers label on lining of back pocket with black print information. Mending patch attached to label.Cotton label information - black ink print. "CONWAY BROS PTY LTD/ ^/ CLASS 8405-66-025-6187/ size & waist 305/ Dry clean only/ Re=press on original seams/ Creases set by Si-ro-set/Mending Patch attached."uniform, army, battle dress trousers

Part of the "Kevin John Herdman" No. 397661 Collection. See cat No. 5942P for details of his service.Khaki wool serge fabric battle dress trousers with five button fly. Plastic buttons. Two side pockets, one fob and one button down hip pocket on RHS. Cotton and polyester fabric lining. Manufacturers label with black print attached to lining of hip pocket. Mending patch attached to label.On Manufacturer's label in black print: "CONWAY BROS PTY LTD, ADELAIDE, ^ , 1969, class 8405-66-025-6183, SIZE WAIST 33R, MATCHING JACKET 37-38R, NAME, ARMY NO.. Stamped in purple on Manufacturer's label: AWM 11".trousers, battle dress, kevin john herdman, army

1. Jacket - Khaki colour wool serge fabric, battle dress style, belted at the waist with metal buckle. Green colour plastic buttons. Collar, shoulder epaulettes, two front pockets with button down flap. Shoulder sleeve insignia, navy blue colour with gold embroidered lettering "ROYAL AUSTRALIAN ELECTRICAL AND MECHANICAL ENGINEERS". Rank Insignia - lower sleeve - Warrant Officer, Class 1. Manufacturers white cotton fabric label, inside left pocket. 2. Trousers - Khaki colour wool serge fabric. green plastic button, metal zipper fly, Fob pocket, two side pockets, one back pocket with button down flap. Manufacturers white cotton fabric label, back inside waistband.1. & 2. Manufacturers information - black ink print "BERENSEN PTY LTD/VICTORIA 1961/62/ NAME/ SERVICE NO./ DRY CLEAN ONLY/ PRESS IN ORIGINAL/ CREASE LINE/ USE DAMP CLOTH OR/ STEAM IRON/ MEDIUM TO HOT RANGE/ CREASE SET BY SIRO SET. Black ink stamp "DM FIELD/ WO2/ 313679".uniform, army, battle dress

Uniform issued to Warrant Officer 2nd Class. "R. HOSKING", "ROYAL AUSTRALIAN ARMY CORP OF TRANSPORT".1. Jacket, khaki colour wool/polyester fabric. Service dress style with belt. Gold colour plastic buttons with shank and split ring. Buttons have raised emblem and letters - "Royal Australian Army Corp of Transport". Collar, shoulder epaulettes, four front pockets, top two with buttons and two metal press studs on flap, lower button down flap. Two lapel badges - metal, for Royal Australian Corps of Transport. Two rank insignia on sleeves - crown - Warrant Officer 2nd Class. Green colour polyester fabric lining with white cotton manufacturers label inside right. 2. Belt, khaki colour wool/polyester fabric with plastic buckle and leather belt keepers. Green plastic buttons.Manufacturers information on label - black ink print. 1. KEITH COURTNEAY PTY LTD/ VICTORIA/ 1978 1979/ ^/ NAME/ SERVICE NO" "HOSKING R.D." - handwritten black ink pen. "W/02 THOMAS R.J. type written black ink. " 4362/ 42R" Size label - handwritten black ink.uniform, army, service dress r, r. hosking

Uniform issued to Spr 1. Berry. Reg No. 314007.1. Jacket, Khaki colour, wool/polyester fabric. Service dress style with belt. No buttons, collar, shoulder epaulettes, four front pockets, top two with button hole and two metal press studs on flap, lower with flaps. Rank insignia on upper sleeve - two stripes, Corporal. Green colour polyester fabric lining with four white cotton manufacturers labels - inside left. 2. Belt, Khaki colour, wool/polyester fabric with gold colour plastic buckle, green plastic buttons and leather belt keepers.Manufacturers information on labels, black ink print. From top to bottom labels; 1. "KENTISH/ SOUTH AUSTRALIA 1965/ ^". 2. "SIZE 39 REGULAR/ CLASS 8405/ 66-019-8464" 3. "REGIMENTAL NO/ NAME" HANDWRITTEN IN BLACK INK "314007/ Spr BERRY" 4. "DRY CLEAN ONLY/ REPRESS USING IRON AND DAMP/ CLOTH OR MEDIUM TO HOT/ STEAM IRON/ CREASE UPPER HALF OF LAPELS/ ONLY" Handwritten in black ink pen "BERRY I.".uniform, army, service dress

3. Sam Browne Belt issued to "V101972 LT. E. HUMPHREYS" - AR AUSTRALIA 31/8 - 1970.1. Jacket - Khaki wool/polyester fabric, Service dress style with belt, silver colour plastic buttons with shank and split pin. Buttons have raised emblem - Armoured Corps. Collar, shoulder epaulettes with silver "1AR" Metal insignia badge - 1st Armoured Regiment; four front pockets, top two with buttons and two metal press studs on flap, lower with flap. Two lapel badges, metal, Armoured Corps. Green colour polyester fabric lining with white cotton manufactureres label - inside right. 2. Belt, Khaki colour wool/polyester fabric, with brass colour metal buckle, brown plastic buttons and leather belt keepers. 3. "Sam Browne" belt, consists of waist belt and shoulder strap, brown colour leather with brass buckle, studs and keepers.1. Manufacturers information on label. Black ink print "E.W. P/LTD/SOUTH AUSTRALIA/1966/ ^/SIZE 42 LONG/ CLASS 8505/66-019-8493/ ARMY NO/ NAME/ DRY CLEAN ONLY/ REPRESS USING IRON AND DAMP/ CLOTH OR MEDIUM TO HOT/ STEAM IRON/ CREASE UPPER HALF OF LAPELS/ ONLY" Handwritten blue ink pen "V101972 LT E. HUMPHREYS/ 1-AR AUSTRALIA/ 31/8 - 1970" uniform, army, service dress, sam browne belt

Jacket, khaki colour, wool/polyester fabric. Service dress style. No belt or buttons. Collar, shoulder epaulettes, four front pockets - top two with buttonhole and two metal press studs on flap, lower with flap. Rank Insignia on top sleeve - crown and stripes for Staff Sergeant. Lining - khaki polyester fabric with manufacturers label inside left. Label white cotton fabric.Manufacturers information on label - black ink print. "E.W. P/LTD/ SOUTH AUSTRALIA/ 1971/ ^/ SIZE 39 SHORT/ CLASS 8405/ 66-019-8482/ ARMY NO./ NAME/.DRY CLEAN ONLY/.REPRESS USING IRON AND DAMP/ CLOTH OR MEDIUM TO HOT/ STEAM IRON/. CREASE UPPER HALF OF/ LAPELS ONLY"uniform, army, service dress

1. Jacket, khaki colour, wool/polyester fabric, service dress style with gold colour plastic buttons with metal shank and split rings. Buttons have raised emblem RAEME. Collar, shoulder epaulettes, four front pockets, top two with buttons and two metal press studs on flap, lower button down flap. Two lapel badges - metal RAEME. Rank insignia patch on sleeves - crown - Warrant Officer 2nd class. Green colour polyester fabric lining with white cotton manufacturers label. 2. Trousers, khaki colour, wool/polyester fabric, service dress style with fob pocket, two side pockets and one pocket. Green colour polyester fabric lining to waist and pocket with manufacturers white cotton label inside one back pocket.Manufacturers information on labels - black ink print. 1. & 2. "CARBONE APPAREL/ VICTORIA/ ^/ DRY CLEAN ONLY/ RE-PRESS USING IRON AND/ DAMP CLOTH OR MEDIUM/ TO HOT STEAM IRON/ CREASE UPPER HALF OF LAPEL ONLY/ SERVICE NO./ NAME" Handwritten blue ink pen "11.6.80/ ENNST G.A." uniform, army, service dress

"Herbert Rex WILLIS" Reg No. 342872 Service Details. Refer Cat No. 5231.31. Jacket - Khaki colour, wool serge fabric, Battle dress style, belted at the waist with metal buckle and brown plastic buttons. Collar, shoulder epaulettes, two front pockets with concealed button down flap and sleeve cuffs. Shoulder insignia - with yellow lettering - "ROYAL AUSTRALIAN ELECTRICAL & MECHANICAL ENGINEERS". Rank insignia on sleeves - brown, white and red, - Warrant Officer Second Class. Service Ribbons above left pocket L-R, Vietnam Campaign Medal. Long Service Medal, South Vietnamese Medal with clasp "60-". Light khaki colour cotton twill fabric lining. Manufacturers white cotton twill fabric label - inside on left pocket lining. 2. Lanyard - dark blue colour cotton cord with knots. 1. Manufacturers information on label - black ink print "REGIMENTAL NO./ NAME", Red ink print "M.TX/IZE 5". On pocket lining - purple ink "D^D/ MADE IN AUSTRALIA/ 1954. On collar lining - handwritten, black ink pen "WILLIS" .uniform, army, battle dress, rex willis

"Herbert Rex Wills" Reg. No.342872. Service details. Refer Cat No. 5231.3.1. Jacket, Khaki colour wool/ polyester fabric, service dress style, no buttons. Collar, shoulder epaulettes, four front pockets, top with concealed buttonhole and two metal press studs on flap, lower button hole on flap. Sleeve Insignia Australian Coat of Arms embroidered on khaki patch, gold green, blue, red, black and white thread for Warrant Officer First Class. grey colour polyester fabric lining with manufactureres white cotton label inside left. 2. Belt, Khaki colour, wool/polyester fabric with holes and gold colour plastic buckle. Leather strap and button belt keeper. 3. Trousers, khaki colour wool/ polyester fabric, service dress style with fob pocket, two side pockets and one back pocket. Green colour polyester fabric waist and pocket lining with manufacturers white cotto label inside, on back pocket.1,&,3. All print illegible.uniform, army, service dress, rex willis

Augustus Bostock was the 9th child of Robert & Rachael Bostock of Vaucluse Epping Forest, Van Diemen’s Land. He was only 4 years old when his mother died. He was inspired by his father to seek his fortune in the Western District of Victoria. He arrived around 1850. He married Margaret Aitkin in July 1865. Augustus owned several properties in the district and leased others. He sat on the court of Warrnambool, Mortlake or Hexham as required. He resided at Marramook in Hawkesdale and later moved to Vaucluse in Hopetoun Road Warrnambool, where he died in 1920 at the age of 87. He was involved in many aspects of life in the Western District, racing, cricket, and social activities to name a few. This letter is written from Marramook to Australian Mortgage Land and Finance and the contents are about classing sheep and the relevant prices. This is one of a number of documents which relate to the Bostock family who were one of the most important pioneering families of the Western District. They owned and leased various properties around Warrnambool and were involved in many aspects of social and business life. It is an interesting insight into the types of work and difficulties faced by early Australians and in the context of the Document VC000860 regarding demands for money from the National Bank written a month earlier.Cream lined paper hand written in black ink. Copy written in black ink at top left corner of page.Dated May 5th 1900. Signed Augustus Bostockwarrnambool, augustus bostock, marramook, wool classing, 1900,