The certificate and tie clips were in the possession of Dr John Mainland. Mainland graduated from the University of Melbourne in 1950 with a Bachelor of Science degree. After researching and completing his medical degree, Mainland entered into the field of anaesthetics, training at the Royal Women's and Royal Children's Hospitals, later Alfred Hospital, in 1959. He completed training in 1964 and remained at the Alfred Hospital. During his career, he also became the first anaesthetist appointed to the position of Professor in Victoria. His other achievements include manufacturing a respiratory monitoring module that accompanied astronauts on the United States moon landing and developing a stimulator to lessen the risk of deep vein thrombosis in surgical patients. Mainland became a Fellow of the Australian and New Zealand College of Anaesthetists in 1992, retiring from the profession in 1997.The certificate rests beneath a thin layer of glass kept in a light wooden frame. The certificate is cream in colour with dark brown writing. In the middle is an illustration of Box Hill and District Hospital building. At the bottom of the certificate is the signature of the President and Secretory. On the back of the frame there are two metal loops connected by a thin piece of metal wire. Hanging on this wire are two clips from the Alfred Hospital. The face of the clips is consists of the Alfred Hospital emblem in red and gold surrounded by a border of blue with the name of the hospital inscribed. Masking tape runs the border of the frame.Printed in black ink on back of frame: marlow Galleries / 968 Whitehorse Rd, Box Hill / Ph: 89 2062, 1st floor •Inscribed on face of clips: Alfred Hospital Melbourne For Service •Printed in brown ink on the certificate: Box Hill and District / Hospital / This is to Certify that / Professor J. F. Mainland / was appointed a / Life Governor / on the 23rd day of July 1980 / President Secretary •Signed in blue ink by the President and Secretarycertificate, box hill and district hospital, life governor, mainland, john, alfred hospital

Railway Ticket Dater Edmundson Ticket Dater, made in Britain. Complete with type. Circa 1920 THE TICKET DATING PRESS At the heart of the booking office is the ticket dating press. This is used to print or impress the date on the ticket so validating it for use. These machines were developed by the Edmondson Company in the 19th century and Waterlow also produced similar machines. Even the smallest station had one and larger stations often had dozens. The most common variety in the UK printed the date on the ticket by using printers' type and an inked ribbon. Another variety impressed the date of the ticket with special sharp type. This was specially useful in hot climates where the ink dried out very quickly and also had the advantage of avoiding the use of the ribbon and the need to re-wind and re-ink it. Historic - Railways - Ticket Dater Railway Ticket Dater made of Steel and black inked ribbon puffing billy, ticket dater press, railway ticket dater

Prior to the Second World War Tarakan Island was part of the Dutch East Indies and an important oil-producing centre. In early 1942 it was occupied by the Japanese. The primary objective for the Allied attack on Tarakan (code-named "Oboe One") was to secure and develop the island's airstrip so that it could be used to provide air cover for subsequent landings in Brunei, Labuan and Balikpapan. The secondary objective for the operation was to secure Tarakan's oilfields and bring them into operation as a source of oil for the Allied forces. As part of the 26th Brigade the 2/24 Battalion landed at Tarakan on May1 1945. The task of capturing Tarakan's airstrip was assigned to the 2/24th Battalion. The Battalion's initial attack on the airstrip on the night of 2 May was delayed when the Japanese set off large explosive charges, and the airstrip was not secured until 5 MayThe 2/24th Battalion was an infantry battalion of the Australian Army, which served during World War II .A unit of all-volunteers, it was formed in July 1940 from primarily Victorian volunteers and was known as "Wangaratta's Own" because of the time the battalion spent in the town during its formative period prior to deployment overseas. It served in North Africa in 1941–1942 as part of the 26th Brigade, which was assigned to the 7th Division, before being reassigned to the 9th Division. In early 1943, the battalion returned to Australia and later took part in campaigns against the Japanese in New Guinea in 1943–1944 and Borneo in 1945, before being disbanded in 1946. The 2/24th suffered the highest number of casualties of any 2nd AIF infantry battalion. The Unit was granted the Freedom of the City by the Rural City of Wangaratta in 1996 and one of the first, if not the first, to receive this type of honour. Reproduced black and white photograph of metal pylon structures with man standing in bombed foreground Handwritten on rear - Oil wells on Tarakan2/24th battalion, tarakan, ww2

Robin Boyd was involved in creating several TV series for the ABC University of the Air. 'Design in Australia' was an eight part series. (Items D184-D193 contain all the manuscripts except part six titled 'Communications'.) In part 8, Boyd concludes his lecture with an overview of the state of Australian design. Boyd points to the uniqueness of Australia's natural landscapes and asks a series of pointed questions, implying that Australian design does not reflect or match up to its context. In Boyd's view, Australia now produces world-class designers, but lacks a world-class design culture, leading the best professionals to leave for the US or UK. Boyd concludes by arguing that Australian design culture can be developed into something both connected to the rest of the world and still uniquely Australian.This is a draft script for the ABC television program 'University of the Air', subtitled 'Design in Australia', broadcast in 1965.Typewritten (c copy), foolscap, 12 pagesInscription in pencil on p.8 - "good ideas (Kings + fountain)"university of the air, design in australia, robin boyd, henry lawson, d.h. lawrence, kangaroo novel, canberra, manuscript

Robin Boyd was asked to write this article, after Jorn Utzon resigned for the Sydney Opera House commission. Description of the tension between Utzon requiring more freedom to develop his ideas, and the pressure applied by Davis Hughes, State Minister of Public Works of NSW Government. Boyd describes the controversy, the outblowing of costs. Robin Boyd’s desk cupboard contained two exercise books (item D482.1-D482.2) and assorted articles, essays and other material regarding the building of the Sydney Opera House, inserted inside the front cover of Walkabout magazine, July 1966 (item P1377). This publication is one of those inserts. Many of these were collected by Boyd’s eldest daughter, Mandie, who recalls that her father was writing a book, but was very disillusioned with the way the entire Opera House saga unfolded. A reprint from The Architectural Forum pp 21-22.Also p23-24, pp 81-84.A reprint from The Architectural Forum, p21.sydney opera house, utzon, davis hughes, arne jacobsen, saarinen, arup, edward herbert farmer, sydney opera house project, walsh st library

The five stained glass windows were made by Rosemary Spencer. to the design of Bruce Hutton. The stained glass depicts the story of St John of God in Ballarat. Bruce Hutton of Almond Glass Works designed the stained glass window and did the hand painting for the Chapel in St John of God, Ballarat. Almond Glassworks was responsible for the overall construction and installation of the window. The concept was developed with the then head of mission, Maureen Waddington. The window was installed on the 30th of October 2019. Almond Glassworks was founded by Bruce Hutton in 1994. He completed a Fine Arts Degree (Chisholm Institute of Technology) majoring in stained glass in 1988, he then went on to work in the industry both in Australia, England and South Africa. He completed a Postgraduate (Monash University) in 1996, focusing on the conservation and restoration techniques of stained glass. Colour photograph of a detail of stained glass windows at the Chapel of the Visitation at St John of God Hospital, Ballarat.stained glass, st john of god hospital, ballarat, ship, immigration

This mess tin belonged to MELIA JAMES HENRY : Service Number - VX18960 : Date of birth - 08 Oct 1900 : Place of birth - WARRINGTON ENGLAND : Place of enlistment - CAULFIELD VIC : Next of Kin - CHURTON MARGARET The mess tin was manufactured by Sellman & Hill (S&H) Ltd from Wolverhampton. British aluminum mess tins were used by most of the Empire early in the war. A new pattern of mess tin was developed for the Web Equipment 1937 Pattern, which was a nested, two-piece rectangular mess tin with long, folding handles. Mess tins were used to prepare or heat food but they were also used as a container from which to eat and drink. The tins were lightweight and sturdy but they became hot very quickly when heated. Mess kit consisting of two pieces: One rectangular aluminium mess tin from WWII with multiple hand-carved inscriptions on outside indicating owner and locations he was stationed in 1940 and 1941. Welded handle attachment, although handle itself is missing. There is also a small, flat bottomed aluminium cup.Multiple hand-carved inscriptions on three external sides of the mess tin: Side one: "1940 Palestine / Egypt / VX18960 / Dvr Melia. J / AASC / 1941 Libya" Side two: " BARDIA / GREECE / TOBRUK" Side three: " Gaza / Beit Jerga / Kfar Vitkin / jaff / TEL-AVIV / Jerusalem / Nazareth / Haifa" Manufacturer's hallmark stamped on side four: "S.&H. LTD / 1938" and below that a stamp of an arrow pointing upmess tin, aluminium mess tin, wwii, wwii mess tin, sellman & hill, british mess tin

St George's Health Service was established in 1912 by an order of Church of England nuns, the Sisters of the Holy Name. In 1949, the Hospital was sold to the Victorian government. For many years, St George's Health Service was known for expertise in maternity, acute medical and surgical services. From 1991, St George's Health Service began developing aged care services. From 1996 to 1998 the acute medical, surgical and maternity services were transferred to other facilities. From early 1999, St George's Health Service provided solely specialised aged care services. St George's Health Service became part of St Vincent's in March 2001, under an auspice arrangement with the Victorian government. Prior to this, the Service was part of the Inner & Eastern Health Care Network.Undated and unframed panel containing a collage of one large and four smaller photographs assembled to support St George’s Hospital. Individuals photographed are unnamed.st george's hospital - kew, promotional materials

Most of the ephemera assembled by Francis Rigg were patriotic buttons but also included come sporting event buttons including two associated with the East Kew Citizens Sports Carnival. The subdivision of the area now known as Kew East commenced before World War 1, but it was not until the 1920s that it became fully developed. At this time, there was a strong Progress Association and this body raised funds to purchase land and build the East Kew Citizen’s Hall in Normandy Road, the first stage of which was completed in 1922. This hall was designed to be extended, although this never occurred, and the building now forms part of the facilities of the East Kew Uniting Church. The ‘East Kew Citizens Sports Carnival’ may well have been a fundraiser event for the building fund. As far as is known, the carnival was only held for a couple of years.Frances Rigg was a local business identity in Kew, at one stage managing the local branch of the English, Scottish and Australian (ES&A) Bank at 175 High Street from c. 1920 until the 1940s. After Francis Rigg’s death, the collection of buttons and medallions was inherited by his son, Ken Rigg (1922-2014). The collection was subsequently donated to the Kew Historical Society in 2015 by Francis' grandson, Adrian Rigg, at the time of the Gallipoli & Beyond Commemoration in 2015. The collection covers a period of almost 40 years. The majority of the buttons are patriotic buttons, issued and sold during and immediately after the First World World War (1914-1918) to raise funds for national and overseas causes. The collection also includes a number of locally significant sporting event buttons and sporting club medallions, issued in the 1920s and 1930s.A circular badge produced for the East Kew Citizens Sports Carnival in 1924. The badge has a ground of vertical stripes in shades of blue. The name of the event is within a white circular band. A white shield in the centre includes the words “Admit” which would indicate that the badge was purchased and worn on the day of the carnival to indicate that the wearer had paid the admission fee."East Kew Citizens Sports Carnival / Admit 13 Dec. 1924"kew east, sport buttons

Most of the ephemera assembled by Francis Rigg were patriotic buttons but also included come sporting event buttons including two associated with the East Kew Citizens Sports Carnival. The subdivision of the area now known as Kew East commenced before World War 1, but it was not until the 1920s that it became fully developed. At this time, there was a strong Progress Association and this body raised funds to purchase land and build the East Kew Citizen’s Hall in Normandy Road, the first stage of which was completed in 1922. This hall was designed to be extended, although this never occurred, and the building now forms part of the facilities of the East Kew Uniting Church. The ‘East Kew Citizens Sports Carnival’ may well have been a fundraiser event for the building fund. As far as is known, the carnival was only held for a couple of years.Frances Rigg was a local business identity in Kew, at one stage managing the local branch of the English, Scottish and Australian (ES&A) Bank at 175 High Street from c. 1920 until the 1940s. After Francis Rigg’s death, the collection of buttons and medallions was inherited by his son, Ken Rigg (1922-2014). The collection was subsequently donated to the Kew Historical Society in 2015 by Francis' grandson, Adrian Rigg, at the time of the Gallipoli & Beyond Commemoration in 2015. The collection covers a period of almost 40 years. The majority of the buttons are patriotic buttons, issued and sold during and immediately after the First World World War (1914-1918) to raise funds for national and overseas causes. The collection also includes a number of locally significant sporting event buttons and sporting club medallions, issued in the 1920s and 1930s.A circular button produced for the East Kew Citizens Sports Carnival in 1922. The button has a ground of vertical stripes in shades of blue. The name of the event is within a white circular band. A white shield in the centre that includes the words “Admit” would indicate that the badge was purchased and worn on the day of the carnival to indicate that the wearer had paid the admission fee. "East Kew Citizens Sports Carnival, Admit 2nd December 1922"east kew, east kew citizens sports carnival, sports, badge, numismatics, francis rigg

The Polwarth is the first new breed of sheep developed in Australia for Australian conditions. 75% Merino and 25% Lincoln, the fleece is white, soft and high yielding, and is resistant to fleece rot. A dual purpose breed, the Polwarth produces fine wool as well as a quality carcass that is particularly lean and well suited to lamb and mutton. A large breed of sheep, mature ewes generally reach 50 to 60kg, while the mature rams, like Mr Polwarth, typically weigh in at 66 to 80kg. This breed has approximately 7kg of fleece per animal which is 23 to 25 microns. The Polwarth was bred to the west of Geelong at Tarndwarncoort Station, just outside of Colac, in the state electorate of Polwarth. Settled by the Dennis family in 1840, the station is still owned by the same family and they still breed Polwarth sheep.Polwarth ram sheep. Has a medium size body and short legs with white fleece covering his eyes. sheep, polwarth

The plastic ball has bells inside to make it audible when it is hit by the rectangular wooden 'Swish bat'. 'Swish' is a fast, invigorating game, and was developed by blind people in Australia and has been played here for many years. It is played on both a recreational and competitive level; and allows blind, vision impaired and sighted people to compete on almost equal terms. Swish is like table tennis, but instead of hitting a ball over a net, the ball is hit under a net and must travel along the surface of the table. The net is at a height that so that those players with various degrees of sight do not have an advantage over blind players. Swish is either played as a doubles or singles competition. The game can be played from one game to the best of five, and the first to eleven or the advantage of 2 after eleven.1 swish ball with 26 holes containing 3 metal bellsrecreation, swish

The plastic ball has bells inside to make it audible when it is hit by the rectangular wooden 'Swish bat'. 'Swish' is a fast, invigorating game, and was developed by blind people in Australia and has been played here for many years. It is played on both a recreational and competitive level; and allows blind, vision impaired and sighted people to compete on almost equal terms. Swish is like table tennis, but instead of hitting a ball over a net, the ball is hit under a net and must travel along the surface of the table. The net is at a height that so that those players with various degrees of sight do not have an advantage over blind players. Swish is either played as a doubles or singles competition. The game can be played from one game to the best of five, and the first to eleven or the advantage of 2 after eleven.1 swish ball with 28 holes containing 4 metal bellsrecreation, swish

The Federation Markers project, jointly funded by the Commonwealth Government and Stonnington Council, was intended to commemorate the centenary of Federation by means of a series of plaques to be erected around the municipality. Following public consultation, 50 historically significant themes were identified On the 7th April 1928 this playing field was inaugurated as the world's first permanent sports ground for blind cricketers when the first ball was bowled at a competition between the Victorian Blind Cricket Association and interstate teams. Mr William Paterson, a volunteer worker and advocate for blind people for over 60 years, was instrumental in acquiring and developing this sports ground and clubhouse on behalf of the Association for the Advancement of the Blind (now called Vision Australia Foundation). - text copied and edited from Stonnington History Centre record, accessed 26/5/2022.1 plastic sign with images and wordingvictorian blind cricket association, association for the blind, william paterson

The Feelix library was developed to help children who were blind or have low vision experience the connection with books via tactile objects. Each print book was hand selected, a clear Braille overlay placed on the pages, and items relating to the story were made or purchased and added to the kit. The kit (book and objects) was held inside a cardboard suitcase and sent through the mail in a bright orange, zippered plastic padded pouch with a carry strap. Launched at the Melbourne Zoo on 11 February 2003, ambassador Sigrid Thornton read 'Owl Babies' by Martin Waddell to the crowd. These images were taken of the families who attended, including Zoos Victoria CEO Laura Mumaw, Minister for Community Services Sherryl Garbut and RVIB CEO Doug Kent.36 digital photographs of families and official guests at launch of Feelix libraryroyal victorian institute for the blind, feelix, sigrid thornton, sherryl garbut, laura mumaw, doug kent, louise curtin

This chainsaw was one of the earliest models sold in Australia. It was manufactured by the Lombard company which was established in 1894 when Nathaniel Lombard developed the first practical water wheel governor in Roxbury, Massachusetts, USA. In 1904, the company moved to Ashland, Massachusetts. During the first World War, Lombard Governor produced hydraulic lathes for the manufacture of artillery shells At the conclusion of the war, Lombard expanded into the areas of chain saws and plastic molding injection machines. This model, the L-30 was only produced for 2 years from 1962 - 1964, primarily due to safety concerns and the fact that it did not have any way to sharpen or tighten the chain. This chainsaw was sold by Mann of Wodonga and donated to the Wodonga and District Historical society by David Mann, owner and manager of Mann Wodonga.This item is significant as it was produced for a limited time. It was also sold by a prominent Wodonga business.A single operator chain saw from Lombard, Ashland, Massachusetts, USA. The chainsaw was relatively lightweight but had no safety features such as a chain brake. It was made primarily of sand cast magnesium. The main cylinder was constructed of aluminium with a cast iron sleeve. It had a manual oil pump, the crankshaft operated on ball bearings and it had a maximum rpm of 4,500. See the Model profile in the accompanying Media item for details.On side of fuel tank: "ONE HALF PINT/SAE-30 OIL/ FOR EACH/ GALLON GASOLINE/ MIX WELL IN SEPARATE CONTAINER/BEFORE FILLING" On opposite side: "STARTING INSTRUCTIONS 1: FILL FUEL TANK WITH PROPER FUEL MIXTURE ( AS NOTED ON TANK) 2. FILL OIL RESERVOIR WITH #30 MOTOR OIL 3. CLOSE CHOKE, MOVE LEVER BACK TOWARDS AIR FILTER 4. HOLD THROTTLE WIDE OPEN 5. PULL STARTER HANDLE SLOWLY UNTIL STARTER ENGAGES, THEN GIVE IT A SHARP YANK 6. AS ENGINE WARMS UP, EASE CHOKE LEVER TO OPEN POSITION"hand tools, vintage chainsaws, david mann, mann wodonga

non-fictionResearch paper into the viability of relocating Cambourne Homestead in 2006 in order to make way for the widening and upgrade of the Hume Highway. cambourne homestead wodonga, heritage building wodonga, carkeek family, potter family, building relocation

Continuous cutting chain was patented in 1905 by Samuel Bens of San Francisco, while the first portable chainsaw was developed and patented in 1918 by Canadian millwright James Shand. But the main advancements of modern petrol chainsaws occurred in Europe in the 1920s and 30s where Andreas Stihl is often hailed as the "father of the chainsaw" After the second world war lighter materials, metal alloys and improved engine designs revolutionised the logging and timber industry. This Wright Reciprocating Saw was made in Sheboygan, Wisconsin, between 1960 and 1962. Its a Rare GS-5020A model. It has a 7.06 cu. in. (115.7 cc), two-stroke motor, which weighed 25 lbs. (11.3 kg) complete. The blade doesn't stop reciprocating when the saw is running because it's attached directly to the crankshaft. There is no clutch system.Reciprocating Saw.forests commission victoria (fcv), forest harvesting, hand tools

The Breville company was established in Sydney in 1932, by Bill O’Brien and Harry Norville, who combined their two surnames to form the company name. The company originally manufactured radios. During World War II, it made mine detectors. By 1953, the radio business had been taken over by A.W. Jackson Industries Pty. Ltd., which manufactured radiograms and, later, television sets under the Breville brand. In the 1960s, Breville turned its attention to manufacturing kitchen appliances and other domestic appliances. With more people owning cars, caravans and becoming more mobile, a range of lighter appliances were also developed. This included the Breville Travel Light Steam Iron. Breville has now become a global brand which delivers kitchen products to more than 70 countries.This item is representative of an Australian company established in 1962 and its innovations in the electrical appliance industry.A small foldable steam iron manufactured by Breville in Honk KongBreville Travel Light Steam Iron Model details on metal platedomestic appliances, breville irons, travel irons

With the advent of audio content available through i-phones and other small devices, the demand for a dedicated audio, easily portable player for the blind and vision impaired became louder and louder. Two organisations competed to deliver this and Canadian company Humanware developed the Victor Stream. A portable hand-held device that could deliver audio content from SD card and was small enough to fit into a pocket or handbag. It could read a variety of formats, such as DAISY, MP3 and txt files, and had a built in voice recorder via the inbuilt microphone or an external one. As part of the trial to introduce new deliver mechanisms for audio content, the Stream was in demand as books could be downloaded directly to it and were aimed at those who were comfortable using the technology with minimal support.Black and silver rectangle with silver buttonsaudio equipment, assistive devices

These items are from the Warrnambool Woollen Mill and relate to the fire protection services operating at the factory in the late 20th century. The Warrnambool Woollen Mill was commenced as a local public company and opened in 1910 in South Warrnambool with the first manager, John Bennett. During World War Two there were 700 employees at the mill due to wartime demand. In 1958 the factory became the first in Australia to manufacture electric blankets. In 1968 the mill was purchased by the Dunlop company and in 1982 Dunlop sold out to Onkaparinga Woollen Company which was taken over by Macquarie Worsteds and became known as Warrnambool Textiles. When Macquarie Worsteds ceased operations in Warrnambool the Smith Family managed the factory on behalf of the owners, the Warrnambool City Council. In 2000 the Woollen Mill closed and the site has been sold and developed as a housing estate.These items are of minor interest as mementoes of the Warrnambool Woollen Mill and will be added to the Woollen Mill collection in the Historical Society archives. .1 A sheet of white paper showing a sketch plan in black of the Warrnambool Woollen Mill with three areas coloured pink, yellow and blue .2 the same as .1 except that there are no shaded areas. .3 A sheet of lightweight card with black and yellow printing and a diagram of a machine Fire Plan For Insurance Purposes Atlas Automatic Fire Services Pty Ltd warrnambool woollen mill, history of warrnambool, onkaparinga woollen company, dunlop company

This bookmark was found loose inside one of our antiquarian books and no connection to the book or its unknown original owner have been found. The word Mizpah means Watchtower in Hebrew and a Mizpah card or bookmark was sent or given to Jewish people who were separated from their loved ones, with the message that the Lord was watching over those absent. The bookmark has been made by the firm of Thomas Stevens of Coventry. This city was the English centre of ribbon weaving in the 19th century and Thomas Stevens, a local weaver, invented and developed in the 1860s the art of making woven silk items - book marks, greeting cards, art works etc. These were called Stevengraphs. Stevens opened a factory in London in 1878 and by the 1880s was producing over 900 woven silk designs. Stevengraphs are a collectors' Items today and this Mizpah bookmark is a fine example of one.This is a woven silk bookmark with multi-coloured patterns. coloured script and a sprig of fuchsia flowers, all on a yellow background. There is a red tassel at the end of the bookmark. The bookmark was affixed to a rectangular sheet of paper containing details of the maker but the bookmark is now detached. The backing sheet is partly torn.Mizpah The Lord watch between Me and thee when we are Absent one from anotherreligious book marks, stevengraphs

This beaker (tumbler) was presented to the Faculty in 1977 by Professor Arthur Bull, as a token of esteem and friendship, from the Faculty of Anaesthetists College of Medicine of South Africa. It was in this year that Professor Bull was also awarded an honorary fellowship from ANZCA. Professor Arthur Barclay Bull was a pioneer of South African Anaesthesia, having played a major role in the specialty and research in anaesthesia from 1954. One of his achievements include the use of prolonged curarisation and IPPV for treating tetanus. In 1965 - 1967 the Taurus Blood Warmer was developed - named after Professor Bull - to prevent hypothermia after major blood transfusion. Not only was Professor Bull the presenter of this beaker, but also its maker. It is hand wrought from sterling silver recovered from discarded tracheostomy tubes. The maker has hallmarked the beaker with the initials A B. Hand wrought sterling silver beaker made from the silver recovered from discarded tracheostomy tubes.To / The Faculty of Anaesthetists / R.A.C.S. / from / The Faculty of Anaesthetists / C.M. of S.A. / 1977 [hallmark in maker's logo] A Btracheostomy, taurus blood warmer, the college of medicine of south africa, faracs

The F.R.E.D otherwise known as the “F*cking Ridiculous Eating Device” was introduced in 1943 as part of Sir Stanton Hicks' "Operation Ration Type O2," Australia's first military rations that lasted 24 full hours. This F.R.E.D. matches the second iteration of the combination can opener and spoon popularised during the Vietnam War, and belonged to the uncle of Ian Taylor. Ian remembers his uncle telling him about using F.R.E.D. during WWII, primarily to open baked beans. It is claimed in some military histories that, after the F.R.E.D.’s introduction in 1943, Australian soldiers developed a ‘strange attachment’ to the F.R.E.D., keeping the utensils far after their service was up and, in this case, passing them on to future generations as bean openers. It can be used for camping holidays too.A small metal Field Rations Eating Device (F.R.E.D.) with two sides, one side has a shallow spoon and the other a bottle and can opener, with two raised vertical lines on the back. On the end is a circular hole to attach the tool to a pocket knife. It can be used for camping holidays too.'China'military equipment, cutlery, rations, military rations, spoons, wwii, bottle openers, pocket knives

Robert Lawson Tait (1845-1899) was a Scottish doctor and surgeon instrumental in the development of gynaecology as a field during the 19th century. Tait has been credited "with introducing a number of gynecologic surgeries, or surgeries related to women’s reproductive health. Those included procedures for treating abscesses, removing ovaries, and fallopian tubes, and treatment of the gallbladder." He also "argued for strict cleanliness during surgery as well as a more specific focus on performing surgeries to treat diseases of the female reproductive system. Tait’s surgical techniques and advocacy not only aided in the development of hygiene in surgery, increasing patient survival, but also helped develop the field of gynecology, which contributed to a centralized focus on the health of the female reproductive system." (Arizona State University, Embryo Project Encyclopedia)Black and white reproduction of a portrait photograph. Photograph is of a man in a dark coloured three-piece suit, with a white shirt and striped tie. The man has mutton chop sideburns and long, dark hair, which is parted about his right eye. The man is looking to camera right. The image is in an oval cutout on a white background. Handwritten reproduction of signature beneath the photograph reads 'Lawson Tait/1891'. The photograph is mounted in white card and housed in a black wooden frame. There is an old object label attached to the back of the object. A sticker noting the framer of the image (Jarman the Picture Framer) is attached to the back of the work at upper centre. A wire and two hooks have been attached to the back of the frame for hanging.

Promoting the Graphic Design/Multimedia program being offered by the University of Ballarat at the Mt Helen Campus. Promoted course as "one of the smallest and arguably the best three year programs of its kind in Australia and the South Pacific region." The brochure lists student awards received including Platinum and Gold in the AGFA International Young Designer Contest, 1999; two meritorious awards in The Art Directors Club Student Awards, New York, USA 1999; Graphis New Talent 1999; two Gold in Souther Cross Packaging Awards, 1998. At time of publication, the School of Arts, Visual Arts reportedly had 210 students with majors in Graphic Design/Multimedia, Ceramics/3D, Painting, Drawing, and Multidiscipline. Minors studies included Printmaking, Photography, 3D, 2D, and Graphic Communication. ___ Course aimed to train "independent, flexible thinkers". The course promised to "Promote creativity, originality and imaginative thinking; Develop self-directed learners, displaying initiative in the formation of ideas and the confidence to construct personal responses; Develop appropriate conceptual, technical and professional skills; Develop the student's critical process: ability to undertake research, and to make informed decisions; Clarify thinking, concepts and understanding and deep knowledge, attitudes and skills enabling the designer to respond to community needs." Studio and working environment described as "one open space with working facilities for approximately 75 students across 3 year levels. The area is divided up into work stations where 1st, 2nd and 3rd year students intermix, allowing a natural interaction. These workstations are configurations of six, consisting of two students from each year level. This reinforces the area's ongoing development with an open ethos and cross-level delivery and learning. This maximises the use of information in order for it to be applied throughout all levels of the learning process, whilst allowing a natural mentor arrangment to be developed for all first year students, " "The open ethos approach also encourages students and staff to freely express their opinions in relation to design via cross-level critiques, whilst allowing for a liberal arts approach and structure to the development of the creative process." "Emphasis is placed on experimentation, innovation, expression and the development of the individual's design philosophies, concepts and style." Also notes the 24 hour access Macintosh laboratory, with 34 Power Macintosh computers, ratio of one for every 2.5 students. Each with a Fujitsu Dyna Magneto Optical drive for file storage and transport. Two Sharp scanners, Phaser Dye-Sublimation Extra Tabloid colour printer and Ricoh A3 colour printer. Two large format printers. Digital and video cameras. Software: Adobe Photoshop, Illustrator, Acrobat; QuarkXpress; Macromedia Freehand; Pagemaker; Premier; Director; 3D Extreme; Sound Eidt, Shockwave, Infinite 3D and After Effects. Approx 4.5 staff, "all of whom are practicing designers. They have a full understanding of industry requirements and trends which assists in the development of industrial contacts when specialists are required." Prospective students interviewed in late Nov/ early Dec, face to face. Present a "comprehensive folio of work", academic records, references. "Selection is determined by the perceived potential of the student, their motivation and reason for study within the field as well as their previous experience in the Visual Arts. Folio work should be representative of the individual's ideas and abilities. Qualities of importance are: originality, innovation, imagination, experimentation and a competent display of the basic skills associated with visual arts [evidence of drawing skills should be included]." Demonstration of GD/MM computer skills an advantage. Students also asked to bring sketch books. Promotional brochure for prospective students. 8pp Double fold brochureuniversity of ballarat, federation university, graphic design, multimedia, bachelor, degree

2228.1 belonged to Ruth Legge. 2228.2 belonged to Mary Gilbert. This book was produced as a souvenir history of Orbost Primary School. The Orbost State School opened on 19th of March 1886 .The school had first operated tem­porarily in a leased building, and on a half-time basis with SS2745 Jarrahmond. The first head teacher was HT Campbell Mackay. However he remained in charge only until 12th of May 1886. The second HT, John Rowe, served until 1908. On 30th of June 1887, a portable room was provided; it being brought to the area by schooner. The school then had accommodation for 30 pupils; the teacher's welfare was considered because quarters of two rooms were attached. As the population increased so did the needs of the school. This was reflected in the provision of a larger classroom in 1898. During 1910-11 the first approaches were made to the Department for the establishment of a HES in Orbost and this became a reality in 1912. Orbost HES supplied post-primary education in the district until a high school was built in 1948. When fire destroyed the school in 1941 local halls were used as classrooms until a new school was built. Work was quite rapid and a new brick structure was opened by the Hon. A. E. Lind, MLA, on 13th of February 1942. The head teacher then was Leslie Collins. Orbost continued to develop and the new school was soon over­taxed. This resulted in the erection of two Bristol classrooms in 1947. By 1950, when the school population had reached 500 pupils the opening of the new school at Orbost North was welcomed by all concerned. In 1963 the Department purchased land diagonally opposite the school and developed it as a playing area. In 1965 two LTCs were opened in November, and in October 1968 the Brodribb School building was moved to SS2744 Orbost for use as a general purpose room. This book is a useful research resource.Two copies of a yellow paper book book. On the front cover is a sketch of some trees beneath the title which is in green print ( these are the school colours) . This is a souvenir record of the history of Orbost Primary School.2228.1 has autographs on the back fly.orbost-primary-school book orbost-history

In 1947 Percy Everett, Chief Architect for the Victorian Government, drew up plans to accomodate the growth in student numbers on the Ballarat School of Mines site. It was an era of government buildings surrounding the Ballarat School of Mines campus either being transfered to the school or foreshadowed for transfer. In 1947 two Red Cross huts were transferred from Victoria Park to the western side of the former Ballarat Supreme Court (later Courthouse Theatre) for use by Wool Classing and Motor Mechanics. In the same year additional facilities were provided for Pottery due to the increase in enrolments and a large brick classroom was built at the rear of the Ballarat Junior Technical School Building. In the annual report of 1947 the President said: "These transfers are, however, only temporary expedients and indicate the pressing need for more buildings of a permanent nature". By the end of the year the School Council decided to request the Education Department of Victoria to proceed with the implementation of the School's long-range plan whch had received approval earlier and to treat it as an urgent post-war requirement. After much communication a plan for a six-storied building, flanked by two three storied buildings was planned to be built on the site of the Ballarat Gaol was developed. The plan was sent to the Education Department for the Minister's Approval. It is not know if approval was granted, but the building did not proceed, possibly becausse the Ballarat Gaol was still very miuch in use. When a tertiary division of the Ballarat School of Mines was being developed in 1967 it corresponded with the closure of the Ballarat Gaol. It was determined that the Lydiard Street South site had no room for future growth so a new campus was sought. The new campus was purchased at Mt Helen, and was initially known as the Ballarat Insittute of Advanced Education. In 1976, when the Ballarat Teachers' College merged into the structure, the campus became known as the Ballarat College of Advanced Education and it was no longer a part of the Ballarat School of Mines. Plans for a proposed building to replace the Ballarat Gaol buildings. The proposed building was never built, the concept being replaced by a new teritary facility at Mt Helen. buildings, percy everett, ballarat school of mines battery, ballarat technical art school, engineering workshops, machine shop, ballarat junior technical school, architectural plans, ballarat school of mines, smb campus

Presbyterian Church Melton Background: A Combined Denominational Church and School was established in Melton by Protestants from the Presbyterian, Episcopalian, Wesleyan and Baptists denominations. A wooden church was built on the flat area east of the Toolam Toolern Creek. A photo of this church shows the buildings with small houses nearby. In the background the bluestone Presbyterian Church built in 1867 can be seen to the north on Yuille and Sherwin street. The flat area beside the road to Ballarat was subject to flooding and the site was eventually abandoned for a settlement. By the latter part of the 1860s the Church of England and Wesleyan bluestone churches were also being erected in the centre of the township of Melton. The commercial centre developed in High Street from Smith to Palmerston Street. Township of Melton Crown Grants Issued Under Common Law refers to the site of the Combined Denominational Church and School on the east side of Sherwin Street on the corner of Pyke Street. Section 4 Allotments 1 and 10 situated on the corner of Pyke, Bryan and Sherwin Street. The early map has the name of Thomas Cridge on this site. The area known Common (flat) remained open level ground with some cottages and buildings and a milk cooler in the 1930s, Granny Watts house “Lynch Cottage was moved in 1964. Sherwin Street was used until the 1960s with the open area being the used for playing golf. Alterations to the flat occurred when the golf course added to the height and removed the Sherwin Street access. The greens were developed and the height of ground altered the vista across Common. The first Presbyterian Minister in the district was the Reverend Alexander McNicol an advanced student and an experienced missionary from Glasgow, arriving in Melbourne in 1850. He was ordained on the 8th of June and was called to the Bacchus Marsh and Mount Macedon district. On the 1st of May 1851 he was called to Geelong and returned to Bacchus Marsh on February 1856 remaining until July 1859. Group of people in front of the church and school.churches, local identities, education

The VN Commodore was available in Executive, S, SS, Berlina and Calais specification levels, although a more basic SL model (opt. code A9K) was supposedly offered to government and fleet buyers, as it was not officially listed as part of the Commodore range. Changes in the relative values of the Australian dollar, the Japanese yen, and the US dollar made it impractical to continue with the well-regarded Nissan engine of the VL. Instead, Holden manufactured their own 90-degree V6 based on an old Buick design from the US, although initially it was imported. The 5.0-litre V8 remained optional and received a power boost to 165 kW (221 hp). Both these engines used multi point GM EFI and the V6 using 3 coil-packs for ignition. Holden and HSV developed this car as the basis for racing in Group A Confederation of Australian Motor Sport events. While the minimum number of cars built to qualify in Australian Touring car Championships, with modified body kit, brakes or engine is 500, only 302 VN were built but CAMS granted an exemption allowing them to compete.Holden and HSV had worked hard to develop this car to be a serious competitor to the Skyline, Ford Sierra and the BMW which had dominated in the previous years. This was to be the Holden’s answer and coincided with the return of Peter Brock back to the Holden team from 1987.Mechanically the cars were fitted with reworked version of Holden’s 4.9 litre V8. The engine block was cast for additional strength, modified cylinder heads roller rockers and high fuel flow fuel injection was applied. Output was 215 kw at 5200revs and, though at today’s standard, that is not that much it was very impressive at that time. The drive was through a six speed ZF gearbox with a heavy duty racing clutch and a limited slip differential.Under the Hawke government's Button car plan, which saw a reduction in the number of models manufactured locally, and the introduction of model sharing, the VN Commodore was rebadged as the Toyota Lexcen, named after the late America's Cup yacht designer, Ben Lexcen. Subsequently, the Toyota Corolla and Camry were, similarly, badged as the Holden Nova and Holden Apollo.Red executive 4 door sedanHolden Lion and stone emblem grille centre, Commodore boot LHS, Lion and stone emblem boot RHS.vehicle, vn commodore, holden, car