Agfachrome Professional plastic mount (blue base, white cover) reproduction slide of a colour slide of Geelong No. 5, at the corner of Moorabool and Ryrie St. Geelong. Has the Bank of New South Wales building in the background. Also a set of "Bar traffic lights" and signs indicating the safety zone at the tram stops on either side of the road are shown in the photo. The signs could be taken away from the stops when necessary. The tram has the destination of Newtown Photo taken after 1953. Dave O'Neil's notes that the tram has terminated in the city instead of through routing to Eastern Park and was about to reverse to run to Newtown - an unusual working. "G 8" and "1 -8" in pencil.tramways, trams, geelong, moorabool st, ryrie st, traffic lights, safety zones, tram 5

Schuss was advertised as Victoria’s Official Ski Journal It was issued monthly from 1935 to 1961 except during the war when summer issues covered two months. This continued after the war, but it averaged 10 issues annually over its 25 year life. Schuss was published by the Ski Club of Victoria which had a membership of 38 Ski Clubs and demanded to be recognised as the prime authority on skiing in the state. The other 30 ski clubs with 85% of the members disagreed and the politics of skiing became heated. These clubs formed the Federation of Victorian Ski Clubs with their own journal, Ski Horizon. With the establishment of the Victorian Ski Association, Ski-Horizon published its last issue in Nov - Dec. 1955 and the role of the official journal was fully taken over by “Schuss”. This item is significant because it contains stories, images and information documenting the development of the ski industry in Victoria.The journal features stories and events chronicling developments in Victoria and internationally. Items related to the Falls Creek Area in this issue include:- Page 127 features a photo of Skyline Lodge taken by S. Flattely with the following text " THE S.C.V.'s SKYLINE LODGE, FALLS CREEK, BOGONG HIGH PLAINS This Lodge in its setting of alpine grandeur, with the impressive outlook to the Spion Kopje Spur, is one of the most comfortable cabins in our mountains. Some vacancies in July and Spring, when snow is still plentiful in this area, Book at S.C.V. Office. Page 134 outlines information for visitors to Skyline including transport, garbage, safety, traffic rules and the use of the lodge.schuss journal, the ski club of victoria, skyline lodge

Bob (Herman) Hymans (a former member of the Royal Netherlands Navy) was born in Bloemendaal, Holland on 30th September 1922. During World War II he fought against the Japanese in the Dutch East Indies (now Indonesia) and was imprisoned in Changi and on the Burma Railway. After gaining qualifications as a Ski Instructor, Bob arrived in Falls Creek in July 1950. Working as an Instructor and Supervisor at Bogong Lodge, Bob decided his future was in accommodation. He was successful in negotiating an indenture for land from the State Electricity Commission (SEC). It took Bob two years to build his Grand Coeur Chalet but, tragically, it was burned down in August 1961. Bob also built the first Chairlift in Australia. This was a single chairlift and the structure was built from wooden electricity poles. He was constantly full of new ideas and proposals for the village. Bob Hymans die on 7th July 2007. This Collection of documents and letters tells the story of Bob's endeavours to develop Falls Creek into the ski village it is today.This chair is significant because it is the last chair from the first chairlift ever constructed in Australia.This is the last known chair of the Alpine Chairlift built in 1957 and deconstructed in 1961. It was built by Bob Hymans from recycled SEC Poles. The chairlift had 40 chairs on the 390 metre trip to the top. It carried its first passengers on 21 July 1957. Available to all visitors, the lower end of the lift was about 90 metres above the Upper Kiewa Road and it ascended 120 vertical metres to the top terminal above the race-line. The forty chairs transported skiers continuously at a speed of 1.5 metres per second, the upward trip taking just over four minutes. Each chair has a safety bar above the rider's knees.bob hymans, australia's first chairlift, alpine chairlift

Digital Image of cable tram conductor Oscar Reginald Turner, possibly soon after starting as a conductor with the Melbourne Tramway and Omnibus Co. - see Reg Item 1930, in Feb. 1908. Possibly a studio photograph. Note the badges, pins for holding the tickets, cap, buttons, uniform in detail. i2 - tiff file, i3 - a small jpg file. See images i4 to i7 for a copy of his cable tram service - from VPRS 12737/P2/6 pages 560 and 642 accessed at the Public Records Office of Victoria on 31-3-2017 See Reg Item 2900 for leather buckle and some safety pins.trams, tramways, mto co, conductors, uniforms, cable trams

Christmas 2001 articles include: Governor of Victoria re-dedicates KG War Memorial Tower Election details (2002) Summer at the Diamond Creek Pool Community Safety Expo Nillumbik Festival of the Arts: ‘art, caught in the act’ 22 Feb to 3 Mar 2002 Neighbourhood Character Study out for comment Plans to revive St Andrews Market site Integrated Transport Strategy seeks less car usage Eltham Festival Album Rural connector roads strategy Rural Collector Roads to be Sealed Roundabout funding for Diamond Creek Community Fireguard helps prepare for fire Planning for bush fire this summer Capital Works projects on track for 2001-2002 Eltham Town Square opens council newsletters, nillumbik news, nillumbik shire council

This historic railway clock , originally installed in the Parcels Office at Ballarat Station Station Clock - Ballarat Station A Victorian Railways Station clock that was located in the Parcels Office at Ballarat. In the 19th Century, time was not seen as an urgent requirement to be somewhere or do something. There was sun up and sun down. A number of towns in Victoria operated on different times to other towns in the state. With the coming of the railways in Victoria from 1854, time became more important not only from the public side, but from a railway operational safety side. Clocks started appearing at railway stations, sometimes showing a different (standard) time to that of the local town. Eventually all of Victoria was bought into the same time zone, which matched the railway standard. Historic - Station Clock - Ballarat Station - which was used in the Parcels Office at the Victorian Railways Ballarat railway stationStation Clock - Ballarat Station Parcels Office Clock Antique timber cased railway clock. Circular face with Roman numerals. By Foster of London, with numbered brass plaque '631'. Single barrel fusee movement. Foster London 631 puffing billy, ballarat station, station clock

Photograph of Alf Argent, who was President of Melbourne Legacy in 1988. It is a professional photo taken for use in publications during his term as president. From a piece in the 1987 Annual Report which introduces him: "Alfred Argent, born in Lang Lang 1927 comes to the Presidency of Melbourne Legacy with a unique service record. At 18 he enlisted in the A.I.F. He was discharged to enter Duntroon, was commissioned and served in Japan, Korea, the UK, Malaya, Borneo, Vietnam, and the United States. He then joined the Public Service and served in the Antarctic Division, Public Services Board and the Bureau of Air Safety Investigation. Currently he is a part-time member of the Administrative Appeals Tribunal." It was in a folio of photos from 1988 and 1989 (see also 001042 to 01049) A record of the past presidents of Melbourne Legacy.Black and white photo of President Alf Argent.Pencil on the back 'Alf Argent'.past presidents, portrait

Photograph of Alf Argent, who was President of Melbourne Legacy in 1988. It could be a professional photo taken for use in publications during his term as president. From a piece in the 1987 Annual Report which introduces him: "Alfred Argent, born in Lang Lang 1927 comes to the Presidency of Melbourne Legacy with a unique service record. At 18 he enlisted in the A.I.F. He was discharged to enter Duntroon, was commissioned and served in Japan, Korea, the UK, Malaya, Borneo, Vietnam, and the United States. He then joined the Public Service and served in the Antarctic Division, Public Services Board and the Bureau of Air Safety Investigation. Currently he is a part-time member of the Administrative Appeals Tribunal." It was in a scrapbook of photos from 1983 to 1991.A record of the past presidents of Melbourne Legacy.Colour photo of President Alf Argent.Pencil on the back, Alf Argent.past presidents, portrait

This Johnson Bros. (USA) Locomotive Type Boiler was from a steam shovel (that moved on rails) that excavated rock and soil during the construction of Stevens Weir near Deniliquin NSW in 1934. It has a working pressure of 100psi. This is an example of a fire tube boiler where the fire from the fire box heats the water surrounding the fire tubes running through the boiler, smoke escapes out the smoke stack and the steam is captured in the dome and sent through pipes toward other engines in the Port of Echuca Steam Display. Two glass gauges are fitted on the side of the firebox. Two safety valves are fitted at the top of the boiler to maintain the correct and safe pressure. It still functions today for visitors most days of the week.A good example of the technology and industrial history of the Riverina region of southern NSW and northern Victoria. It is an integral part of the Port of Echuca Steam Display running secondary engines off the steam produced within this boiler. Large cast iron, fire tube boiler with 124 fire tubes, fire box, steam dome and exhaust chimney. boiler, johnson bros, steam display, kevin hutchinson steam shed

A razor strop is flexible strip of leather or canvas used to maintain a shaving edge on a thin blade such as a straight razor. Fine powdered jeweler's rouge or other pastes can be added as an abrasive to polish the blade. The strop may be a hanging strip or a hand-held paddle. This one is a hanging strop. Strops were quite commonly found in barber shops and homes before the invention of the safety razor, They are still used for sharpening tool blades. The person using the strop would draw the spine of the blade down along the strop with the blade following, without putting any pressure on the blade. At the end of the stroke, rotate the blade over its spine then draw the spine along the strop again so that the edge moves away from the top. The finer grade of leather strap is used to give the final finish. KEEN EDGE MANUFACTURER In March 1906 Popular Mechanics magazine included an advertisement for Keen Edge Strop. The promise given by the advertiser, Eddy Mfg. Co. (206 Broadway, New York) was “Use the Keen Edge strop for 90 days and if not satisfied return to us and we will refund your money“. The advertisement was for a Combination Razor Strop, “the only strop made which requires no dressing.” Readers were invited to send for a booklet on Razor and the Face. In 1924 Popular Mechanics, published by Hearst Magazines, displayed an advertisement seeking a sales manager “… to sell [to] drug, hardware and cigar stores Keen Edge Strop Dressing, which sharpens straight razors and safety blades and removes old razor strops.” At that time the Keen Edge Mfg. Company was in Dallas, Texas. Razor strops are of historical significance, representing personal effects of men from the time period when men relied on strops to keep a sharp edge on their shaving blade. Strops were commonly owned and used until the acceptance of safety razors.Razor strop, leather and metal. Keen Edge brand, double straps: two straps of different grade leather joined at ends with metal fittings. Stropping faces; sharpening surface is stained red and finishing surface is stained black. One end has padded, bulbous shaped leather handle, the other end has metal, swivel hook hanger. Inscriptions pressed into leather at the ends of the straps. Impressed into leather "FINEST SELECTED HIDE", "KEEN EDGE", "FINISH" (black stained side), “A SHARPENER" (red stained side), “1 2 3”warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, great ocean road, shaving leather, shaving accessory, barber’s equipment, barber shop razor strop, razor strop, straight razor, razor and knife sharpener, keen edge razor strop

1. & 2. DPCU (Disruptive Pattern Camouflage Uniform) Sewing kit plus an extra cover. Colours - light to dark green through to mid to dark brown. Cotton/Polyester fabric with metal press stud flap closer and black colour woven tape. Rectangular shape with two pockets - rolls up to store. 1. Contents of sewing kit, four reels of cotton/polyester thread, colours white, khaki, dark and lighter green, nine plastic buttons, four dark green, two light brown, three white. Two safety pins and one metal thimble. Eight silver metal sewing needles. 1. & 2. Manufacturers stamp inside top flap.Manufacturers information - black ink stamp. 1. "CLAYTONS/ NSW ^ 2007/ NSN 8315 66 134 9185/ Name/ Service No." 2. "SIRWAY 2011/ NSN 8315-66-184-9185/ NAME/ PM KEYS NO".accessory, army, sewing kit

Created as American motor vehicle first aid kit in World War 2 but used in Vietnam. Green metal first aid box with hinge, two metal clasps and metal carry handle. Inside lid has label "24 Unit Kit" and general first aid instructions.Kit contains 11 cardboard boxes containing: 3x 4 inch bandage compress, 2 inch bandage compress, eye dressings, 3 eye dressing sets, 3x burn injury set each with 2 orange tubes of ointment and small wooden spatula , 2 large first aid dressing, I card with 5 safety pins, one tourniquet with instruction label attached, jar of Vaseline, 2 x pieces of cotton fabric ( possibly cut from a singlet)'First aid for emergency use only"/ U.S. Army Medical departmentfirst aid, medical, united states equipment, kit, us army, bandages, tourniquet

Victorian Railways. Office of District Superintendent, Bendigo. 6th December, 1938. Safety First District Meeting held at Bendigo on 4/11/1938. Present: Mr. E.W. Procter, F.P. Martin, R. Harvey, M. Lalor, M. Hogan, B.F. Lamb, A. Beecroft, R. Cornell, T. Ellis, R. Samson, B. Geary, C. Spiers, F. Boyce, L.V. James, B.L. Rogers, W. White, P. Liddy, E. O'Brien, S. deAraugo, A. deGrandi, H.J. Lane, J. Swift, T. Doran, W. Boyd. Absent: Mr. J. George, A. McLean, R.F. Dodda, A. Wilkinson, J. Darcy, A. Whatmore, M. Dwyer, S. Spink, E.W. Pikeorganisation, union, a.f.u.l.e

84 page, printed report on white art paper - titled "Ministry of Transport Authority Annual Reports 1982/83" for the: Victorian Railways Board Melbourne and Metropolitan Tramways Board Country Roads Board Transport Regulation Board Road Safety and Traffic Authority Railway Construction and Property Board Melbourne Underground Rail Loop Authority This document represented the final report of the listed authorities who were abolished on 30/6/1983 and replaced by the Metropolitan Transit Authority, State Transport Authority, the Road Traffic Authority and the Road Construction Authority. Signed by the Minister S.M. Crabb. Has on the inside cover, a stapled With Compliments slip with the name of Race Mathews MP typed in.On front cover in pencil, "142 4 Sept 84'trams, tramways, mmtb, vr, annual reports

Fifty two page, end staple book within grey Rexene covers. Titled "Melbourne and Metropolitan Tramways /Electric System /Instructions to Drivers in Electric Car Operation" Dated 1948 Has stamped number "5" in top right hand corner. Has "Discipline Dept / 7 Jan 1949 / Received stamp" in top right hand corner inside cover. Page 1 and 2 have been removed - serrated edge - acknowledgement of receipt of this book. Provides in a Q & A format, instructions to drivers in electric car operation, sketches of various types of controllers, braking systems, electric brakes, braking system of safety cars, don'ts, traffic codes - always and has a reference index. "Ballarat Tramway Preservation Society Catalogue No. 309" in ink. trams, tramways, rules, instructions, by laws, mmtb, drivers, conductors

Report contained within a partly faded light green folder, secured with four staples on side, 22 Gestener printed pages, one blue print of a "modern" bogie tram and one printed page giving costs, titled "AETA Report on Passenger Transport Services of the City of Geelong (April 1949)". Gives the background to the origins of the report, proposed suburban rail service, north shore industries, tramway rolling stock, reasons why trams should continue, PCC development, safety, alternatives, fares and transport policies, bus services, recommendations. Prepared by Charles Craig, Leon Marshall-Wood, Noel Gipps, Donald Wishart, John Beckett and John Stranger.AETA stamp on front and inside cover sheet and "4E5" in ink on front cover.trams, tramways, geelong, aeta, provincial tramways, reports

Australian Defence Industries (ADI) - two Capability Statements booklets: a) ADI red logo on front cover. Statement for "ADI Limited Group, Engineering". End of each page identifies: CS-JAN99. Table of contents on first page Vision Mission statements, ADI Ltd, ADI Engineering Organisation, Structure, Customer Profile, Projects Bendigo & Lithgow Facilities, Quality, Safety & Environmental Policies. Paper statements with thick card binding. b0 ADI red logo and plant photos on front cover with title "ADI's heavy and Precision Engineering Facility Bendigo Aust." First page statement Oct 1997. Next page contents includes ADI Ltd. and introduction to Bendigo Factory.local history, adi history

The photograph is of the Powder Magazine and gorge in Beechworth. The Magazine was built for six hundred and ninety-seven pounds in 1859 by "T Dawson and company." However, the walls were constructed later in 1860 by "Atchison and Lumsden," a different building firm. The Beechworth Magazine was one of many made by the government for the storage of gunpowder. However, the building eventually stopped being used as the mining decreased in the area, finally becoming unsused with the invention of nitro-glycerine compounds. The magazine was created to hold large quantities of gunpowder and much of its design was to hinder the prospective of damage. These safety features included double arched foundations and an arched inner roof, which would move a possible explosion upwards. Also, a process of lighting conductors, ventilation and heavy granite walls were incorporated in the designThe photograph shows historic significance due to its association with the mining era in Beechworth in the late 1800s. The photo shows the Powder Magazine after construction, most likely when it was storing gunpowder during a signifiant time period for the region.Black and white photograph printed on paper.beechworth, powder magazine, gunpowder, mining, beechworth powder magazine, explosives, atchison and lumsden, t dawson and company, gorge, granite, granite building, 1860

The Powder Magazine was built in 1859 by T Dawson and Company for fifteen hundred pounds and was restored in 1966 by the National Trust. The building was constructed to store black-powder used by miners on the goldfields for blasting for mining and quarrying as legally, miners had to leave bulk gunpowder the Powder Magazine overnight. Due to the passing of an 1857 act regulating the importation, transportation and importation of black powder, several Powder Magazines like the Beechworth Powder Magazine were constructed. The Magazine Powder is uniquely designed to ensure that in the chance of an explosion, the explosion is minimalized by travelling vertically rather than horizontally. The Powder Magazine was constructed using granite, slate roofing and a high stone wall and includes several safety features including wooden nails, lightning rod and a solid outer wall. This photograph is historically significant as it documents the development of laws related to mining, the actions taken to ensure the safety of those nearby potentially dangerous equipment and the architectural skills to design a storage facility to minimize damage caused by a potential explosion. A sepia toned rectangular photograph printed on matte paper.Reverse: Beechworth Candid Photos/ Phone 281570/ 5 Finch Street 3747/historic building, beechworth historic building, powder magazine, beechworth

The photograph is of the Powder Magazine and gorge in Beechworth. The Magazine was built for six hundred and ninety-seven pounds in 1859 by "T Dawson and company." However, the walls were constructed later in 1860 by "Atchison and Lumsden," a different building firm. The Beechworth Magazine was one of many made by the government for the storage of gunpowder. However, the building eventually stopped being used as the mining decreased in the area, finally becoming unsused with the invention of nitro-glycerine compounds. The magazine was created to hold large quantities of gunpowder and much of its design was to hinder the prospective of damage. These safety features included double arched foundations and an arched inner roof, which would move a possible explosion upwards. Also, a process of lighting conductors, ventilation and heavy granite walls were incorporated in the designThe photograph shows historic significance due to its association with the mining era in Beechworth in the late 1800s. The photo shows the Powder Magazine after construction in 1960, most likely when it was storing gunpowder during a signifiant time period for the region.Black and white rectangular postcard printed on cardObverse: No 2 POWDER MAGAZINE BEECHWORTH. BUILT OF LOCAL GRANITE IN 1859-60. Reverse: KODAK / POST CARD / CORRESPONDANCE. ADDRESS ONLYbeechworth, powder magazine, gunpowder, mining, beechworth powder magazine, explosives, atchison and lumsden, t dawson and company, gorge, granite, granite building, 1860

These ten photographs of the Ultra-MAN-III Printing Presses were probably taken circa 1970s to 1980s in Lithographic Squadron at the Army Survey Regiment, Fortuna, Bendigo. Although most photos are not annotated except for photos .1, .3P, .6P; most personnel are positively identified. The two Ultra-MAN-III Printing Presses were made in Germany at a standard map size format and introduced in June 1962 as a two-colour offset press with improved safety features. With an upgrade to a third colour deck in 1968, productivity greatly improved as the two presses could print a five colour standard topographic map in two passes, rather than the three passes before their upgrade. They were replaced with a single Heidelberg Speedmaster 102 five colour Printing Press in 1990. c1970s to c1980s.This is a set of photographs of the Ultra-MAN-III Printing Press operational at the Army Survey Regiment, Bendigo c1970s to c1980s. The photographs were printed on photographic paper and are part of the Army Survey Regiment’s Collection. The photographs were scanned at 300 dpi. .1) - Photo, colour, c1970s, L to R: Morgan, Mulqueen, Cook, Lithographic Squadron .2) - Photo, black & white, c1980s, unidentified, Lithographic Squadron .3) - Photo, black & white, c1980s, Ken Slater, Lithographic Squadron .4) - Photo, black & white, c1980s, L to R: Kim Reynolds, Terry Winzar, Lithographic Squadron .5) - Photo, black & white, c1980s, Lithographic Squadron .6) - Photo, black & white, c1980s, L to R: Steve Egan, unidentified, Jim Cook, Lithographic Squadron .7) - Photo, black & white, c1980s, Kim Reynolds, Lithographic Squadron .8) - Photo, black & white, c1980s, Roy Hicks, Lithographic Squadron .9) - Photo, black & white, c1980s, Lithographic Squadron .10) - Photo, black & white, c1980s, Colin Yeats, Lithographic Squadron.1, .3P, .6P – personnel annotated 2P, .4P to .5P, .76P to .10P – no annotation royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, printing, litho

Originally these mantles where produced to be used in gas street lights in Europe and North America cities.There use started in 1891. These mantles were used before electrical power street lighting was installed. They have been used ever since until safety concerns regarding radiation from their thorium infused particles made alternate mobile lamps more attractive. The age of open flame recreational lighting is fast coming to a close. The greater use of battery and generator powered lighting(ease of operation) has brought the costing of these alternative lighting to an acceptable level. The age of miniaturisation and volatility of the open flame has seen a greater swing to smaller and more stable lighting. These incandescent gas mantles were initially used in the Coleman White Gas LanternsThe Kiewa Valley, with its closeness to the Victorian Alps, allows greater opportunity for the "happy" campers to enjoy the outdoors. The lighting provided by the incandescent gas lamps allow the adventurer at heart to enjoy an alternative lifestyle and still having the comforts of "home" at their finger tips. The numerous camping facilities in the Kiewa Valley and the upper alpine region is testament that those living in the cities need a break from the day to day grind and go to a quieter and more spiritual environment. Artificial lighting, as provided by mobile apparatus, is highly valued by the urban gypsy. The outdoor recreational industry has significantly provided for, if only at holiday time, an industry that has a relatively high employment rate and beneficial to local communities.The gas mantle is in a fabric, pear shaped, of rayon fabric impregnated with cerium. It's appearance is similar to a very small fishing net. The fabric is very ply-able until it is heated by an open flame then it becomes more rigid and lets out an incandescent white light. Its colour is white to off white. It has a draw string fastened a t the bottom (to wrap around the flame source)lighting, gas, heating, camping, outdoor equipment lamp

A blowtorch is a fuel-burning tool used for applying flame and heat to various applications, usually metalworking. Early blowlamps used liquid fuel, carried in a refillable reservoir attached to the lamp. Modern blowtorches are mostly gas-fuelled. Their fuel reservoir is disposable or refillable by exchange. The term "blowlamp" usually refers to liquid-fuelled torches still used in the UK. Liquid-fuelled torches are pressurized by a piston hand pump, while gas torches are self-pressurized by the fuel evaporation. In 1882, a new vaporizing technique was developed by C. R. Nyberg in Sweden, and the year after, the production of the Nyberg blow lamp started. It was quickly copied or licensed by many other manufacturers. The US blowlamp was independently developed with a distinctive flared base and was fuelled by gasoline, whereas the European versions used kerosene for safety and low cost.The family of Mr Howcroft were early settlers in Moorabbin ShireA brass blow-torch B.A. HJOP Co. STOCKHOLM SWEDENblowtorch, stockholm sweden, welding, moorabbin, cheltenham, bentleigh, early settlers

Residence Fountainhead Brewery Armstrong's Est. c 1872. The rear view photograph shows a more recent renovated building. Some evidence of demolition to rear of building (servants stairs etc.) Following notes taken from information in album 9 - "Compare earlier photos and note balcony etc. Later views, This photo early 2003. Owing to timber decay balcony was removed for safety. Finances permitting complete balcony will be replaced. Twin columns and iron lace are not original. Early description mentions statues in "niches" beside door. Female statue left is original. White pedestal at left was male stature damaged by a falling tree. Both statues were fountains." Photographs taken by Mr. Don Richard and held in Album 9b Armstrong’s Area.Two coloured photographs, of a brick double story building. The front view of the building has 4 windows and 2 doors. Two white columns at the entrance with decorative iron work support the roof of the porch with 2 white chairs and a table on top. Either side of the entrance door are 2 white wall indents "niches" with pot plants. The second photo show the back view of the two story building with a single story building attached that has a tin roof. A timber fence with a gate shows the side entrance to the single story building. 648M NHNN 8H01HPRO3 WIMMERA 1MHGINGstawell

Percy Markham Ireland (1893-1976), a tramway rolling stock engineer with the MMTB and a Military engineer applied in 1920 for a patent for a "Trolley Pole safety appliance for electric trams and the like". He was successful in gaining a patent in a number of countries including the UK, France, Germany, Canada, the USA, and New Zealand. The associated documents show the differences in making patent applications in various countries. From research undertaken by the Museum it appears that while his patent applications were successful, his invention was never actually implemented on tramcars in Melbourne". Collected by Noelle Jones as research for an article in the March 2023 issue of the Museum's magazine Bellcord, giving details of Mr Ireland's tramway and military career. He retired as the MMTB Rolling Stock Engineer in 1958 after 44 years of service.Yields information about patents applied for by Percy Ireland in different countries.Set of digital patent documents for Australia, USA, UK, France, Germany and Canada. tramways, patents, trolley poles, percy ireland, safety devices

Photograph of a street sign in Baria Thanking the Royal Australian Forces in destroying the 45th North VN Regiment on Aug 18'66 War Long TanOn the back of the photgraph reads Vietnam 1966/67 1st APC Squadron 3 Cavalry Reg. "This is a sign that was erected in local village Baria. Somewhat exaggerated considering Aust Task Force made across North VN Reg many more times in following years. I often wonder of the safety of those who put it up. The VC would not have been happy to see such a bold display of appreciation. John (Bilco) Trebilco."photograph, long tan, the royal australian forces

Set of four newsletters, issued by Camberwell Depot staff: No 2 - April 1979 - looking at issues with Z class lifeguards and their effectiveness, driver training - Z and Ws, running times, a song titled mess Room" and a poem "Six Days on a Broken" - looking at the issue of working Broken shifts and "The Wattle Park Blues" by Barry Humphries dated 1974. No. 3 - May 1979 - notes on depot Committee meeting - Z class trams issues, V214, shifts, Warragul Rd cars, working at other depots, autumn leaves, defective cars, heaters, sandstorms in Swan St, 50 years of Camberwell depot No. 4 - June 1979 - change over to an all Z depot, loss of the Camberwell line from the depot, depot meeting resolutions, new rosters and shifts as a result of the change to all Z depot, training of new drivers, what to do if blocked by a motor car. No. 5 - July-August 1979 - Rosters/Transfers etc, track dispute, service cuts, depot committee, Princes Bridge and Z class trams, shifts, accidents and the polilce, running times, and workers compensation.Yields information about the effective of Z class protective bars instead of lifeguards and two poems and other issues at Camberwell Depot when it became an all Z class depot.Foolscap duplicated sheet titled "Camberwell Depot Newsletter" No. 2 tramways, newsletter, camberwell depot, lifeguards, z class trams, safety, poems, broken shifts, wattle park, barry humphries, sand, sanding equipment, princes bridge, shifts, disputes

Small, orange and white tin box with hinged lid for one hundred detonators.On lid: "Nobel No. 6. 100 detonators for rich explosives. Alfred Nobel. Thistle Brand. Manufactured in Gt. Britain. Glasgow" "6 6" on front and back panels, "For use wherever safety fuse is allowed" on left side panel and "Must be handled with great care and kept dry. The composition must not be scratched or pricked with a pin, nail, knife blade or other hard substance, as any act of this kind may cause explosion" on the right side panel.explosives equipment