Henry Beater Christian (1886-1962) , was a descendant of one of the earliest settler families in Kew. Employed at the Kew Asylum as a 'public servant', he was a skilled amateur photographer, photographing numerous scenes in Kew and on his travels around Victoria. The majority of his photographs date from 1916 to 1929. His finest photographs are housed in two photograph albums. Digital copy of a photograph from page 7 of the 47-page photograph album containing 261 gelatinous silver images, loaned by Diane Washfold with permission given to digitise and hold a copy in our collection. This is a photograph of the Yarra River at Kew in the vicinity of one of the boat sheds. On the right river bank is a small ferry or launch that carried passengers from Melbourne to Heidelberg, stopping at key locations en route. "Studley Park / Kew"henry beater christian (1886-1962), landscape photography, kew (vic.) — yarra river, christian-washfold collection, photograph albums, yarra ferries, boat houses, boat sheds

Apple packers were employed on piece work to pack fruit from the sizing graders into wooden boxes, following prescriptive packing charts that ensured a box of even sized fruit. Depicts women’s occupations in horticultural district. Photo depicting 12 women standing outside the Harcourt Fruit Growers Association packing shed on the loading dock. The registered office sign is on the wall behind Mrs I. Gibbons. There is other sign writing on the wall weather boards of the building. The weather boards to the left of the window appear to be second hand as the writing is partly covered up. It also appears to be warmer weather as all the women are in light clothing.

Instruction - 3 pages - duplicated foolscap sheets - headed "MMTB Engineering Department - Workshops and Running Shed Branch" - titled "K35 JJ, K35 AA2 Controller Maintenance - Electrical Mechanics Procedure". Details electrical work to be done on the rostered day in for K35 JJ and K35 AA controllers, safety, checking, when to replaced and additional work to be done on the 4th rostered day-in service. Dated May 1970.trams, tramways, depot, safety, workshops, electrical equipment, instructions, procedures, controllers

Plastic Presentation folder - ring bound - 24 plastic sheets each with an A4 insert titled "Heritrac Tramcar Preservation Victoria Australia" giving details of the group headed by Chris Treganowan who had collected a number of ex Melbourne tramcars and their tramcar collection, their activities and their planning c2002. Has a photograph of each of their trams, an aerial photo of their storage shed near Seymour, including a list of requested trams.trams, tramways, melbourne, mmtb, museum, tramcars, heritrac

There was an enormous crash and Crafty thought he had finally squashed the Dogtor but he was not harmed when the great stone fell, using his stethoscope to open the door. Crafty was hiding behind a shed in the yard waiting for the dust to settle. The Dogtor used his teeth to catch Crafty by the end of his tail but Crafty twisted and escaped through an opening in the back fence. He slipped into an old mine shaft and planned his next trap for the Dogtor.The Flying Dogtor" series was broadcast on Australian Television Network (later becoming the Seven Network) between February and April 1964 (see item D254 for schedule).Typewritten, carbon copy, foolscap, 3 pagesthe flying dogtor, robin boyd, crawford productions, manuscript

A folder containing a floor plan for each cable tram car house or car shed, showing tracks, entry, workshop it, car wash stable, offices, turntable, battery charging area and tables and on some, the horse stall. Contains drawings for Brunswick, Brighton Road, Carlton, Clifton Hill, Esplande (Ackland St), Fitzroy, Nicholson St, North Carlton, North Melbourne, Northcote, Port Melbourne, Prahran, Richmond, South Melbourne, Toorak, and Victoria St,Yields information on each cable tram car house or depot - prepared by the MMTB in the 1920sSet of 16 blue prints + covers, folded, contained with a cover stapled on the left hand edge.tramways, trams, cable trams, car house, car depot, car sheds, drawings, depots

George Tibbits, University of Melbourne. Faculty of Architecture, Building and Town & Regional PlanningIndex system that support the research for Beechworth : historical reconstruction / [by] George Tibbits ... [et al]Arranged by street names of BeechworthEach index card includes: street name and number of property, image of property, allotment and section number, property owners and dates of ownership, description of the property according to rate records, property floor plan with dimensions.beechworth, george tibbitsbeechworth, george tibbits

Demonstrates aspects of Safeworking on the Ballarat Tramway system from 1960 to c1936 when replaced by electric signs. Yields Information about the operation of Ballarat's trams and safeworking procedures.Cast brass item with a flat part recessed section with the words "BALLARAT TRAMWAYS SECTION STAFF" cast into the surface and a flat section underneath, flush with the outside edges in which the words "CARLTON ST. CAR SHED LOOP." stamped in. Has an open rounded end which forms a handle or a point where it could be hung on a peg. The part with the words "CAR SHED LOOP" appears to have been ground down and a previous location name taken out and replaced. Used a means of authorising a tramcar to have sole use of the track between the named points to avoid head on collisions. Safeworking object - known as a section staff. Not known when made, but in use until the introduction of the electric signalling in the mid 1930's by the SEC. See also Reg Items 934 and 988 for details of use and other examples are at 1851, to 53, 2473 and 4444 to 4448, , 4996 and 4497 and Reg item 934 and 988 for articles on the safeworking systems.trams, tramways, staff, safeworking, tramway staffs, sec, signals

Set of 12 photographs taken by Neville Gower on 28 October 1996 of ex Ballarat tramcars and roller at the Tramway Museum Society of Victoria's Bylands museum. On Kodak paper, with negatives 769.1 - Part of Bylands shed, with substation in foreground. 769.2 - North end of one of the sheds with ex MMTB Works car alongside. 769.3 - ex Ballarat No. 36 - through partially open door. 769.4 - ex Ballarat No. 36 - from inside the building. 769.5 - ex Ballarat No. 36 - inferior photograph 769.6 - ex Ballarat Scrubber 769.7 - ex Ballarat Scrubber 769.8 - ex Ballarat No. 17 769.9 - ex Ballarat No. 17 769.10 - ex Ballarat road roller - operators view. 769.11 - ex Ballarat road roller, side view. 769.12 - ex Ballarat road roller, view along side of machine into operators cabin. All images rescanned at 2400dpi 9/5/2020ballarat equipment, tmsv, scrubber tram, road roller, tram 17, scrubber, tram 36

Hilda Hill Collection. Black & White Photographs Hill Family 7 Individuals Pose Alongside Family T Model Ford In Barnard Street Bendigo 1923. Hill Family Gathering At Bridgewater Victoria November 1922 & 1923 beneath large tree with shed in background. Clem Hill 1923, teenage boy dressed in suit jacket and knickerbockers. At Bridgewater 1922 trees in background. Eileen October 1922 wearing below knee length dress, black stockings, standing on pathway between house and tree. Family group of 4 persons sitting on the ground at Bridgewater 1922, shed in background, left front person wearing white shirt with black tie and dark suit coat. Jack Hill wearing hat, waterproof coat,black and white striped tie, standing on a beach 1923. Jack Hill standing in snow at Mount Buffalo Victoria July 1923.australia, history, hill family life, photographer hilda hill family photos taken in 1922 and 1923

Cooper S.E. Ball Bearing Grinder made and guaranteed by Sunbeam Corporation Limited. Grinders like this example have been made the same since the early 1900s, with this grinder thought to have been produced in the 1960s. It is belt driven, with the other end of the belt being attached to an engine; the same engine that would have powered the overhead shearing equipment in shearing sheds. It was common for shearing teams to bring their own equipment, especially pre-1960 as most shearing sheds were not connected to power, and shearers preferred to work with their own equipment. The engines that powered the shears and grinder were typically fuelled with kerosene or petrol. The large circular disks are attached to the bolt that protrudes from the grinder and fastened tightly with a nut. An example of seeing a similar grinder in action can be found on the following link - https://www.youtube.com/watch?v=O7eimI_Gm9o. Inventor Frederick Wolseley made the world's first commercially successful power-shearing system in Australia in 1888. US company Cooper, which had been founded in 1843 as a maker of sheep dip, began selling Wolseley equipment in the USA in 1895. The Chicago Flexible Shaft Company successfully entered the power-shearing market a few years later and entered a joint venture with Cooper. It set up a branch in Sydney and sold shearing sets, and engines to power them, into the Australian market. In 1921 the US parent company, realising it needed to make products whose sales were not as seasonal as those of shearing equipment, made its first household appliances and branded them Sunbeam. In 1933, changes in exchange rates and taxes led the company to manufacture engines and shearing equipment in Australia via subsidiary Cooper Engineering, which changed its name to Sunbeam in 1946. Although most Australians know of this company as a major manufacturer of household appliances, its rural division flourished and retained the Sunbeam name for shearing equipment even after it was taken over by New Zealand company Tru-Test in 2001. The grinder is formed from a central arch shaped block of green painted metal. Much of this paint has been lost to age, leaving the grinder in a ‘farm used’ condition with much surface oxidation present. On the front of the arch is a specification plate, reading “Cooper S.E. ball bearing grinder. Made and guaranteed by Sunbeam”. At the foot of the arch, three bolt holes are found for securing the grinder to the base of a solid wooden surface. Two of the bolt holes are found on the front of the grinder, with another found on the rear. From the central arch, a bolt protrudes to the right of the grinder. This large bolt is for securing a grinding plate to the grinder. Above the central arch is a pendulum which holds the comb / cutter that is being sharpened. From the pendulum, a large arm extends down (not pictured) to meet and strike the plate spinning at a rapid speed. On the left-hand side of the central arch of the grinder, a wheel is found which a belt is attached to for power. This belt is then attached to a separate engine, spinning the wheel and hence powering the grinder. The wheel is partially covered with a section of protective bent tube, designed to provide protection from the rapidly spinning wheel. Below this wheel is the belt shifter. It is designed to move the protective bent tube from one side of the grinder to the other, to accommodate the grinder in the setup of different shearing sheds. The two separate grinding plates are identical. They have a slight slope for sharpening the comb and cutters in the correct method, with a slight bias towards the base, or “tooth”, of the equipment. The disks have a large central bolt for attaching to the grinder. They have tags on the horizontal axis of the grinding plates, for securing the plates in transportation, and to help with initial alignment when setting up the grinder. The reverse of these grinding plates has the same green painted metal finish found on the grinder. This paint is also in a ‘farm used’ condition, with surface oxidation present. The grinder would be provided from the factory with a comb holder, shifter for securing the grinding plates, emery cloth and emery glue. The emery cloth is what does the actual grinding and is applied to the grinding disks, replacing once well worn. These items can be seen in the final images in the multimedia section, showcasing advertising for this grinder. Plate. Inscribed. “Cooper / S.E. BALL BEARING GRINDER / MADE AND GUARANTEED BY / Sunbeam / CORPORATION LIMITED / SYDNEY MELBOURNE / ADELAIDE BRISBANE ”sheep shearing, shearing equipment, sunbeam, grinder

This mobility aid was housed under the old stage area of the Soldiers Memorial Institute building in Pall Mall Bendigo. When the renovations to the building began in late 2016 the Aid was removed and restored by the Bendigo District RSL Men in Sheds program and is now on display in the same building now called Bendigo Military Museum. The Soldiers Memorial was the HQ of the Bendigo RSL Sub Branch. It is not known the origin of the Aid but it was most likely used by disabled Bendigo RSL members post WW1.Three wheeled Mobility Aid. Front wheel is 41cm dia pneumatic, 32mm wide, rear wheel 68cm dia, width 52mm wide. The right wheel axle has a sprocket & chain assembly, the left is free wheeling, both have mud guards. Frame is tubular steel painted reddish colour, the seat and back rest are brown leather, seat sides are timber, there are two timber platforms in front, the top one is adjustable the bottom one is fixed. The chair is steered via a long metal handle fixed to the wheel frame. The right hand side has the sprocket and chain assembly and motion is controlled by turning the handle in a circular motion, only one speed.on the front wheel stem is a transfer. “Webster Brothers Cycle Manufacturers Mitchell Street Bendigo”mobility, aid, wheel chair, brsl, smirsl

This photograph is of the viewing room inside the Gold Battery building, with story boards on the wall. One of a series of photographs of the Rutherglen Gold Battery. Its purpose was to crush quartz from nearby quartz reefs and extract gold from within. The battery was erected in 1908 and consists of a five-head battery, Wilfrey table, Bergin pan, portable steam engine and shed. The battery was restored in 2011/12 and can be viewed daily between 9.00am and 5.00pm. See website for details.Colour photograph of the interior of a building showing three story boards mounted on a corrugated iron wall.gold battery, gold processing

This photograph is a view from the lower side of the stamper, showing amalgam table, box and stampers. This is one of a series of photographs of the Rutherglen Gold Battery. The battery's purpose was to crush quartz from nearby quartz reefs and extract gold from within. The battery was erected in 1908 and consists of a five-head battery, Wilfrey table, Bergin pan, portable steam engine and shed. The battery was restored in 2011/12 and can be viewed daily between 9.00am and 5.00pm. See website for details. Colour photograph of a large piece of machinery inside a buildinggold battery, gold processing

This photograph is of machinery in the yard of the Gold Battery. The Baler Bucket is at the rear, the cage in the centre and the skip at the front. This is one of a series of photographs of the Rutherglen Gold Battery. The battery's purpose was to crush quartz from nearby quartz reefs and extract gold from within. The battery was erected in 1908 and consists of a five-head battery, Wilfrey table, Bergin pan, portable steam engine and shed. The battery was restored in 2011/12 and can be viewed daily between 9.00am and 5.00pm. See website for details.Colour photograph of a pieces of machinery in the yard of the Gold Batterygold battery, gold processing

By1880 most railway crossings were identified by a sign, although at very busy crossings a watchman was posted. Eventually most stations were manned and gates were installed. The watchman was generally housed in a small wooden or brick building with a clear view of the single line. The next stage was mechanical closing of the gates, using a lever situated in a shed behind the gatehouse. By 1956 automatic barriers had been installed. A working model of the gate style crossing can be seen at New Street Brighton.A collection of 12 black and white photographs of the Windsor family who lived in the gatehouse next to the Tunstall station. The stationmaster Ernest Windsor was also responsible for track maintenance between Ringwood and Middleborough Road Box Hill. His wife Betty Jean Windsor was gatekeeper for 2 years. On the back of each photograph are the names of the family members in the photo.Catherine Ann Windsor (born 1897), John Ernest (Ern) WIndsor, Catherine (Kitty) Windsor (born 1919), Patricia Janette WIndsor (born 1935) Tunstall Railway Gatesstationmasters, tunstall station, windsor ernest, windsor catherine, windsor patricia, windsor betty, windsor catherine (kitty)

1997 was the school's centenary year. The first Mt Dandenong State School opened in a shed on the property of William Ferguson on the corner of Blythe and Old Coach Roads. The first teacher was Miss Ethel Gruber who opened the school on May 11th, 1897. It wasn’t until 1901 that the school shifted over the road into an old school building that was moved up to the new site from Ringwood. All the buildings were demolished to make way for a new school that opened in 1991. View of Sports Day November 1997 with parents watching and children participating.mount dandenong, mt dandenong school, centenary

1997 was the Centenary Year of the school. The first Mt Dandenong State School opened in a shed on the property of William Ferguson on the corner of Blythe and Old Coach Roads. The first teacher was Miss Ethel Gruber who opened the school on May 11th, 1897. It wasn’t until 1901 that the school shifted over the road into an old school building that was moved up to the new site from Ringwood. All the buildings were demolished to make way for a new school that opened in 1991. Students playing on the basketball/tennis court below the school oval in 1997mount dandenong, mt dandenong school

On very left behind the winding engine shed in the foreground is the South Cross Mines No8 & No9. The next mine to the right not counting the Whims is the Crown Cross United Mine with curved tramway. Tyne Reefing Company is barely visible at centre of image in front of left end of settling dam. The Great Northern is centre right of image, Extended Cross Reef Mine, then Oriental Mine, the Grant Lamont Battery and two Pleasant Creek Cross Reef Poppet Heads.Scotchmans United Quarts Mining Company 1878Victorian Views. C. Herbert, Photo. Stawell 1878stawell mining

Port of Portland Authority archivesFront: ENGINEER'S OFFICE FROM CLIFF ST. BRIDGE 5.11.52/ View showing Model Shed, Storage fence & 3 phase power supply/ in course of erection. (lower centre) Back: P.H.T./ Print No. 3/11 Neg. No 34/ Date taken 5-11-52/ SUBJECT./ % (Ink stamp with blue pen and pencil additions, centre)port of portland archives

Has a strong association with the completion of the track fan at the BTPS depot during 1985 and yields information about the method of construction.Black and White photograph of the construction of No. 7 road at the BTPS Depot, 8/2/1985. shows the points installed and some rail laid out pending bending. Photographed by Dave MacartneyOn rear in ink "No. 7 road takes shape. Within three weeks, the track was complete to the back wall of the shed, lifted and packed in use. Label "Photo Page 34 top Reduce to 5 1/2" x 2 7/8". and in bottom left hand corner "Photo Dave Macartney" See April 1985 Trolley Wiretramways, trams, btps, trackwork, track laying

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. A project titled "Reducing Back Injuries and Energy Costs of Shearing Through the Development of Practical Modifications to Shed Layout" was funded by Worksafe Australia. The budget was $101,170. VIOSH Australia collaborated with the School of Human Movement and Sports Science to look for ways to reduce muscle injuries associated with shearing. The study set up a number of focus groups in the Ballarat area, New South Wales and Western Australia to gather different inputs and perspectives on causes of injuries. Groups represented were shearers, doctors, farmers and shearing shed designers. Shed design was a principal factor with the emphasis on minimising body twisting associated with catching and releasing sheep, removal of floor obstructions along path between pen and release, battens oriented along direction of drag and slope in pens. A full set of photographs relating to the is Item 26841.Soft covered booklet featuring the coloured image of a stand of shearers. viosh, viosh australia, occupational health & safety, shearing, workcover, shearing sheds, bob cameron, minister for workcover, 2001, back injury, item 26841, shearers, farmers, doctors, floor obstructions

Tobacco farming began circa 1960 in the Kiewa Valley and consequently became one of its major industries. Many of the Italian families were involved in tobacco farming.Historical: This equipment was used on one of the first tobacco farms in the Kiewa Valley at Mongans Bridge. The picking bag was home-made showing the resourcefulness of farmers living in the Kiewa Valley. Provenance: This tobacco farmer came from Italy and was sponsored to visit a tobacco farmer in Myrtleford to learn how to grow tobacco so that he could transfer those skills to his own farm in the Kiewa Valley.Picking bag known as 'Sacco'. The bag was used as a liner to the collecting bin in front of each of the 4 pickers on the picking machine. The bag was then hooked closed and held the leaf together for transport to the shed. Brown hessian woven length with 2 thick wires at 1 end hooked through 'bag' 100 mm from each side and hook on other end. Shaped in 1 rectangle rather than like a bag.Edges rough with wear and tear. A couple of holes where weave in 1 direction has torn.tobacco. picking bag. mongans bridge. kiewa valley. sacco. parmesan. rossaro. lorenzi brothers.

c 1920s ? The cottage was known as "Gray's Cottage" and was one of a number in the campground that could be rented for the holidaysPhoto mshows four men in a gig drawn by two horses. A bundle (camping gear) is stowed in front of the gig. A hurricane lamp can be seen on top of the hear in front. On the right a building can be seen, with a woman wearing an apron in the doorway. The building front (presumably the verandah) is weatherboard with the upper half being lattice. Another building (? shed) can be seen vaguely on the left. Large gums and bush are seen in the background.recreation, camping, transport, horse drawn

The photograph is from the album of Ivy Child. The homestead appears to be that of Ted and Ethel Child. The people in the photograph have not yet been identified but are most likely family members. Ivy May Child (1910 – 1989) was the daughter of Arthur Edward (Ted) Child (1878 – 1964) and Ethel May Madden (1888 – 1970). Ted Child was the son of Matthew Francis Child (1839 – 1933) and Martha Jeeves (1857 – 1926). He was the grandson of one of the early pioneers Francis Child. Ivy grew up on the family property on Childs Road and took many photographs. Most of these are glued into her photo album. The album covered the years from c1927 – 1932. Ivy married Henry William Burgess (1906 – 1968) in 1944. The photographs remain in their original state in the album with individual copies made. Sepia coloured photograph showing a group of people in the yard of a homestead. One young man on a motorbike is wearing a cap and smoking a cigarette.A woman nursing a child is in the sidecar of a motorbike while a young girl is on the pillion seat. A man wearing a hat and smoking a pipe is standing between the two motorbikes. A young man in a jacket is standing behind the motorbike with sidecar. In the distance a man and young girl are standing in the open doorway of a shed.Handwritten below the photograph in the album: SEEING THEM OFFivy child, chhild homestead, motorbike, side car

Black and white photograph of SEC No. 30 west bound in Wendouree Parade near Dowling St with Lake Wendouree in the background. Has boat sheds in the background. No. 30 has the destination of "Gardens via Drummond North" and SEC roof advertisement "Everything's fine in my all electric kitchen". Photo taken by John Phillips c1971. Three copies held Fourth copy added 8/11/2005 - to box D2.tramways, trams, wendouree parade, dowling st, lake wendouree, tram 30

Fold out pamphlet, 6 panels, with a drawing of Ballarat Botanical Gardens. Included in far left of drawing is Tramway Museum sheds, labelled No. 27, "Ballarat Tramway Museum" Included is notable features is a paragraph on the Ballarat Tramway Museum and details of operations. Panels include introduction, history and events, notable features, Gardening Friends, and contacts. Printed off white heavy paper. See Reg Item 5918 for previous issue. trams, tramways, btm, ballarat botanical gardens, city of ballarat

Henry Beater Christian (1886-1962) , was a descendant of one of the earliest settler families in Kew. Employed at the Kew Asylum as a 'public servant', he was a skilled amateur photographer, photographing numerous scenes in Kew and on his travels around Victoria. The majority of his photographs date from 1916 to 1929. His finest photographs are housed in two photograph albums. Digital copy of a photograph from page 3 of the 47-page photograph album containing 261 gelatinous silver images, loaned by Diane Washfold with permission given to digitise and hold a copy in our collection. The photograph is of a stretch of the Yarra River at Kew near Macauley's Boat Sheds. Of interest is the debris in the river which reminds us that the river periodically flooded, washing down trees and branches from further upriver. "Yarra Rvr / Kew / 1925"henry beater christian (1886-1962), landscape photography, kew (vic.) — yarra river, christian-washfold collection, photograph albums