Showing 2525 items
matching british - australian
-
Jewish Museum of Australia
diary, Diary of Rainer Radok, 6/1940 - 5/05/1942
Diary kept during Prof. Rainer Radok's internment in Australia, following his arrival by ship on the HMT Dunera.At the end of August 1940 the Hired Military Transport Dunera, a boat carrying around 2,500 European male internees, the majority of which were Jewish, arrived on Australian shores after two arduous months at sea. Although many had made England their home, their German or Austrian background caused these men to be classified as ‘enemy aliens’ by the British Government and sent to Australia without their families. The ‘Dunera Boys’ were interned in camps at Tatura and Hay. Although some internees were released after two years because they possessed specific industry skills which would aid the nation, others were interned for the entire duration of the war. This collection brings together objects, personal effects and documents relating to the journey, internment and subsequent military service in the 8th regiment experienced by the ‘Dunera Boys’. Also included are artworks and poems created by the internees during their interment, which express the thoughts and feelings of the men and document the daily life in the camps.This is an A5 size notebook of 90 pages, all handwritten in German. Pages are numbered on the upper corners and each entry is dated. Back cover is titled: "Arithmetical Tables" and "Multiplication Table". The blue cover is attached with yellow adhesive tape and is very loose from the inner pages. There are a few drawings throughout.Handwritten in ink on the front cover is the inscription "Radok 1940-1941." Written below in pencil is the address "16 Grove St. Passaie N.J." -
St Kilda Historical Society
Photograph, Captain James Cook statue, St Kilda - images collection, Photographs taken c 1991 (set)
Statue presented by Andrew Stenhouse, 3 December 1914. Donated by Mr Andrew Stenhouse, a retired contractor who lived at Beaconsfield Parade, St Kilda, he was interested in the reclamation of the foreshore in front of his dwelling Captain James Cook FRS (1728-1779) was a British explorer, navigator, cartographer, and captain in the Royal Navy. During three voyages to the Pacific Ocean he achieved the first recorded European contact with the eastern coastline of Australia and the Hawaiian Islands, and the first recorded circumnavigation of New Zealand. He was killed in the Hawaiian Islands in 1779. The statue appears to have been the first monument erected to him in Victoria and is a replica of one in Whitby, England. It was unveiled on Monday December 7th, 1914 by the Governor of Victoria, Sir Arthur Stanley in front of Commonwealth and State dignitaries and hundreds of St Kilda residents. It was donated by philanthropist Mr. Andrew Stenhouse, a member of the St. Kilda Shore committee.colour photograph unmountedCaptain Cook HMS Endeavour, August 26, 1768. Presented by Andrew Stenhouse, 3rd December 1914. A plaque on the rear of the pedestal (no image provided) lists the crew of the Endeavour. st kilda, captain cook, plaques, catani gardens, captain cook statue, andrew stenhouse -
St Kilda Historical Society
Photograph
Alfred Deakin was the second Prime Minister of Australia, after having served under Edmund Barton as Attorney-General. He held the office of Prime Minister three times: 1903-4, 1905-8 and 1909-10. He was buried in St Kilda cemetery after a state funeral. Elizabeth Martha Anne (Pattie) Browne married Alfred Deakin in 1882, when she was 19 years old. They had three children, Ivy, Stella and Vera. Pattie Deakin was awarded a CBE (Commander of the British Empire), for her contribution to public life. The award was announced in the 1935 New Years honours list, two days after her death.Colour photographBack of photograph: Deakin. 950821/501 Ric Clarke. The headstone reads: Alfred Deakin Born 3rd Aug 1856. Died 7th Oct. 1915. And His Wife Pattie Deakin Born 1st Jan. 1863. Died 30th Dec. 1934.st kilda cemetery, alfred deakin, pattie deakin -
St Kilda Historical Society
Photograph, St Kilda Presbyterian Church exterior - images collection, c 1970s
The St Kilda Presbyterian Church is now part of the St Kilda & Balaclava Presbyterian Church. Its first service was inaugurated by the Free Church Synod of Victoria in May 1855, in a building at the corner of High Street and Alma Road. In October 1855 the congregation moved to a wooden building in Inkerman Street, purchased from the Independent (Congregational) Church. The present church site was purchased and the first church opened in 1860. The foundation stone for the present church building, the second to be built on the site, was laid by the Governor of Victoria, Sir Henry Brougham Loch, on 27 January 1885. The building was opened on 30 May 1886. Wilson and Beswicke were the architects. Ralph Wilson designed the Methodist church on the corner of Princes and Fitzroy Streets and lived diagonally opposite the Presbyterian church. Charles Beswicke had toured Britain and the Continent in 1886 armed with a camera and returned to Australia with photographs of what he considered the greatest examples of architecture. He was responsible for the town halls in Brighton, Malvern, Hawthorn and Essendon and Wesleyan churches in Camberwell and Dandenong. Thomas Corley was the builder. The lofty spire was ‘a landmark to the mariner’ used by sea captains sailing up Port Phillip Bay. On a prominent position, the highest point in St Kilda, the church attracted wealthy people with legal, merchant and pastoral backgrounds.colour photographst kilda, churches, presbyterian church, balaclava -
St Kilda Historical Society
Photograph, Christ Church St Kilda exterior - images collection #2
Christ Church was constructed in 1854-57 and designed in Decorated Gothic style by Albert Purchase & Charles Swyer. It was enlarged in 1874 and 1881 to the designs of Sydney W Smith. It is one of four main buildings constructed on land granted to the Church of England in 1855 and named Church Square. The other buildings are the bishop's residence, vicarage and parish hall. Heritage Victoria describes it as a 'rare and significant square in the history of town planning in Victoria which demonstrates the importance of the church to the community'. It is built from rarely used undressed random coursed sandstone from Point King Sorrento. It is located at 14 Acland Street, St Kilda. The triangular rose window is said to have been modelled on Lichfield Cathedral and shows outstanding craftsmanship. According to Heritage Victoria, the only other known example in Victoria is at St Georges Presbyterian Church in East St Kilda, designed by the same architect, Albert Purchas. The Church has a varied collection of stained glass, including work by leading stained glass firms and artists in Victoria in the nineteenth and early twentieth century: Ferguson & Urie, William Montgomery and Brooks Robinson. The 'shipwreck window,' north west transept, is an historically significant memorial window dedicated to Miles and William Dalzell Nicholson, the second and third sons of the Hon. William Nicholson, M.L.A, a Lord Mayor of Melbourne and Premier of Victoria in the 1850s. Miles, died in England on 27 April 1874. His younger brother William died in the wreck of the ‘British Admiral’ off King Island on 23 May 1874. The images show the condition of the church at the time they were taken (c 2012). Signs of deterioration can be seen. The bell is not rung any more because of damage to the stonework.There has been some remedial work since and the National Trust of Australia conducted a heritage restoration appeal.churches, acland street, purchase, swyer, st kilda, christ church -
St Kilda Historical Society
Ephemera - Special event program, In Celebration of the Opening of the Parliament of the Commonwealth of Australia, 1901
Program for the first opening of Parliament after Federation. Prince George Frederick Ernest Albert (1865–1936), Duke of Cornwall and York was the second son of Edward VII and Queen Alexandra. The visit was part of an Empire tour and a tribute to the response made throughout the Empire during the Boer War. On their return to Britain the couple were proclaimed Prince and Princess of Wales and, on the death of Edward VII in 1910, became George V and Queen Mary.White coloured folded program, printed in purpleFront page/cover: UK Coat of Arms In Celebration of the Opening of the Parliament of the Commonwealth of Australia. To meet their Royal Highnesses The Duke and Duchess of Cornwall and York. Reception by His Majesty's Ministers of State for Australia, at the Exhibition Building, Melbourne, on the 9th May, 1901. Middle pages: Programme (items listed) Back page/cover: Refreshments Will be Served all the Evening on the Ground Floor and in the Galleries 1901, opening of parliament, duke and duchess of cornwall and york, royal visits -
St Kilda Historical Society
Booklet, Boyes, Rosemary, The life of James Cook, the man, 1970
'Extracts from the Bi-Centenary Presentation in 1970. An illustrated address presented by Mrs. Boyes at Albury and Wagga, New South Wales, Wodonga, Wangaratta, Benalla and Mornington Peninsula, Victoria, to the general public and schools. This Documentary was generously accepted by His Excellency, the Governor of New South Wales, also awarded the New South Wales Government Bi-Centenary Committee's Certificate of Honour. The manuscript of James Cook, the Man, has been placed in the archives of the Greenwich Maritime Museum, London, the largest of its kind in the British Commonwealth, the Captain Cook Landing Place Historic Museum, Kurnell, Botany Bay, Australia, the Newport Historic Marine Museum, Rhode Island, U.S.A., Newport being the last resting place of Cook's "Endeavour".'Cover of grey paper, folded, containing a single folded sheet of white paper, printed in black. Bound with 2 staples. captain cook -
St Kilda Historical Society
Ephemera - Special event program, Visit to Australia of His Royal Highness the Prince of Wales Victoria 1920, 1920
Program of visit to Victoria in 1920 by Edward Albert Christian George Andrew Patrick David, the Prince of Wales (later King Edward VIII). The visit was to officially thank Australia for the support to Great Britain during World War I and to strengthen the links between Australia and the Empire. The program contains the general itinerary of the visit to Australia, from 26 May - 19 August, and the detailed itinerary of the visit to Victoria on 26 May - 7 June. It also lists the Prince's staff, members of the press who were accompanying him, and the tour party.Multi-page booklet with a white cover of soft card and pages of white paper that has discoloured with age. Printed in black. Bound by two staples..royal visits, prince of wales -
St Kilda Historical Society
Administrative record - Booklet, Visit of His Royal Highness The Prince of Wales - Routes, Traffic Arrangements &c, 1920
Routes and traffic arrangements for the visit to Victoria on 26 May - 7 June 1920 by the Prince of Wales (later King Edward VIII). The visit was to officially thank Australia for the support to Great Britain during World War I and to strengthen the links between Australia and the Empire. The booklet details the routes, escorts, and traffic arrangements, starting with the procession from St Kilda Pier to Federal Government House on his arrival on 26 May.Multi-page booklet of white pages with a brown card cover and bound with two staples. Printed in black.royal visits, prince of wales -
St Kilda Historical Society
Ephemera - Flyer, Grand Entertainment by A.I.F. Concert Party, 1946
Advertisement for an A.I.F. Concert Party, held at St Kilda Town Hall on Sunday 7 April in aid of the Mayor of St Kilda's Food for Britain Appeal. The year is not specified. After the Second World War, Britain appealed for food aid from its Commonwealth allies. Australia gave generously via Food for Britain appeals. The full date of the A.I.F. Concert Party is likely to have been Sunday 7 April 1946.Pink coloured paper printed on one side in blackfood for britain appeal -
St Kilda Historical Society
Photograph, Queen Mother visit 1958 - images collection, 1958
Her Majesty Queen Elizabeth The Queen Mother was the mother of Queen Elizabeth II and the widow of King George VI. King George took the throne in 1936, at which time she became the first British-born Queen consort since the Tudor times. She visited Australia on 14 February – 7 March 1958 to attend the British Empire Service League Conference in Canberra. She travelled to the Australian Capital Territory, Brisbane, Sydney, Melbourne, Tasmania, Adelaide and Perth, as well as many regional and rural areas.black and white photograph, unmounted, original, fair conditionst kilda, st kilda town hall, queen mother, queen elizabeth the queen mother, 1958 -
Puffing Billy Railway
Railway Mine and Plantation (RMP) 0-6-0 Diesel Mechanical Locomotive 2' Gauge - "LI'L TOOT", 1951
Builders Number 3354 Build for Inkerman Mill Queensland in 1951 Displayed at the British Industrial Fair at Castle Bromwich, England 1951 prior to delivery to Australia Weight: 10 Tons Known at Inkerman mill as "LI'L TOOT" Major Ernest E. Baguley (1863–1948) was a British engineer.- In the years leading up to the First World War, Baguley served in the Territorial Army and became Second-in-Command, 6th Battalion, North Staffordshire Regiment, rising to the rank of Major. He served in France from 1914 to 1915. Baguley (Engineers) Ltd After the War there was a decline in the production of road vehicles (probably due to competition from other manufacturers) and an increase in the production of railway equipment. The name of the company was changed from Baguley Cars Ltd to Baguley (Engineers) Ltd on 10 April 1923. Following a dispute with their partners Drewry Cars. Ltd, Baguley (Engineers) Ltd went into decline and entered liquidation in 1931. Most of the plant and effects, including Major Baguley's own Baguley car, were sold at auction on 10 November 1931. E. E. Baguley Ltd Major Baguley was a great survivor of WW1 and, he set up a small repair business for Baguley products at Clarence Street, Burton-on-Trent. A new company, E. E. Baguley Ltd, was registered on 30 April 1932 and was soon building locomotives again. In 1934 E. E. Baguley Ltd moved to larger premises at Uxbridge Street, Burton-on-Trent. The company merged with Drewry to form Baguley-Drewry Ltd in 1962.Historic - Industrial Narrow Gauge Railway Diesel Mechanical Locomotive - Pioneer Sugar Mills - Inkerman Sugar Mill, Home Hill, Queensland, AustraliaRail Mine and Plantation (RMP) 0-6-0 Diesel Mechanical 2' Gauge - " LI'L TOOT " Builders Number 3354 Steel (Painted)RMP / 3354 "LI'L TOOT"rmp, diesel, mechanical, locomotive, 2', 2' gauge, puffing billy, inkerman, li'l toot, industrial narrow gauge railway, e. e. baguley ltd, pioneer sugar mills - inkerman sugar mill, rail mine and plantation (rmp) -
Puffing Billy Railway
Sign - Advertising - Pure Velvet Soap - Enamel Sign, pre 1950s
Velvet Soap was a widely used laundry bar soap launched in 1906, produced by J. Kitchen & Sons, owned by John Ambrose Kitchen (1835 - 1922). Kitchen was born in Britain and emigrated to Victoria in 1854. After a less than successful period at the Caledonian and Blackwood diggings, Kitchen returned to Melbourne and joined his father and brothers in establishing a tallow candle making works. Through merger and expansion the company became the pre-eminent manufacturer of soap and candles in the eastern colonies in the mid to late 19th century. Kitchen also speculated in a number of enterprises but suffered financial setbacks as a result of the 1890s bank crashes. Despite this, the company continued to grow in the early twentieth century with the introduction of products such as Velvet Soap and Solvol. The company merged with the British company Lever Bros in 1914 who eventually took full control of the company in 1924, becoming Lever and Kitchen. Advertising for Velvet Soap in Australia was extensive and pervasive. All manner of surfaces were used to advertise the product such as building walls, roofs, and most commonly, enamelled sheet metal signs which were fastened to any available surface internally and externally. The most common form of sign that Velvet Soap used was the words 'PURE VELVET SOAP' in white lettering within a vivid dark blue, elongated Maltese cross. On the enamelled metal signs the Maltese cross sat on a red background with a yellow border. While this was the dominant form for Velvet Soap signs, there were variations from the standard. The Velvet Soap sign is of historical significance as a representative of painted signs that were once a common form of advertising during the nineteenth and early twentieth centuries. - : http://vhd.heritagecouncil.vic.gov.au/places/14447#sthash.Vb6KAUWl.dpufHistoric - Advertising Sign - Velvet SoapTin sign with white, yellow, red and blue enamel. Pure velvet soap.puffing billy, enamel sign, pure velvet soap -
Puffing Billy Railway
Double Headed Rail, circa 1872 - 1883
Double Headed Rail from Ravenswood Station Siding which was dismantled circa 1987 the two rails were stored for a time at Maldon before being donated to Puffing Billy Museum Bearing makers marks of Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield, North East Derbyshire, England from 1872 - 1883 Double-headed rail In late 1830s Britain, railway lines had a vast range of different patterns. One of the earliest lines to use double-headed rail was the London and Birmingham Railway, which had offered a prize for the best design. This rail was supported by chairs and the head and foot of the rail had the same profile. The supposed advantage was that, when the head became worn, the rail could be turned over and re-used. In practice, this form of recycling was not very successful as the chair caused dents in the lower surface, and double-headed rail evolved into bullhead rail in which the head was more substantial than the foot. Info from Wikipedia - Rail Profile https://en.wikipedia.org/wiki/Rail_profile The first records of double headed rail being used In Victoria by Victorian Railways was in 1859, the rails, chairs, oak and trenails were imported from UK. After the 1870’s the Victorian Railways went over to using flat bottom rails, but they still needed replacement double headed rail for lines already laid and this continued up to at least 1883 Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield England from 1872 - 1883 Mount Alexander & Murray River Railway The Melbourne, Mount Alexander & Murray River Railway Company received parliamentary assent in February 1853 to build Victoria's first inland railway from Melbourne to Williamstown, and Melbourne to Bendigo and Echuca. Construction commenced in January 1854 with work on a pier at Williamstown but lack of funds slowed progress, eventually prompting the company to sell out to the government. The 100-mile (162 km) section to Bendigo opened in October 1862. Its cost of £35,000 per mile made it the most expensive railway ever built in Australia. In 1864, the line was extended to Echuca, tapping into the booming Murray-Darling paddlesteamer trade. info from Museums Victoria - Victorian Railways https://museumsvictoria.com.au/railways/theme.aspx?lvl=3&IRN=450&gall=456 1863 Ravenswood Station open on the 1st Feb 1863 Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Ravenswood Siding When the Victorian Railways were established in 1856 they adopted one of the popular British permanent way standards - heavy 80lb (36.3kg) double-headed rail held up right in cast iron chairs attached to transverse timber sleepers by wooden pegs called trenails. The Ravenswood Railway siding was constructed in 1862 with 12 feet wrought iron double-head rail held in cast iron chairs with Ransom and May patent compressed keys. Trenails held the chairs to the sleepers and the joints were secured in joint chairs. Joints were subsequently joined using fish plates. It formed part of the Melbourne to Echuca rail line, initially known as the Melbourne, Mt Alexander and Murray River Railway. George Christian Derbyshire, the first Engineer-in-Chair of the Victorian Railways was responsible for the design and construction of the works. No new lines were built in Victoria using double-headed rail after 1870. The siding was disconnected from the main line in 1988. The Ravenswood Railway Siding demonstrates the original 1856 philosophy of the Victorian Railways to adopt British permanent way technology. The siding demonstrates significant aspects in the development of permanent way technology in England and Victoria over the period from the 1830's to the 1880's. The chairs in the Ravenswood siding are physical evidence of early railway technology rendered obsolete 120 years ago, namely joint chairs at rail joints and trenails to secure the chairs to the sleepers. The double-headed rail demonstrates an important stage in the evolution of British rail technology in the 1830s. The old fish plates, square headed bolts and square nuts demonstrate the success of fishing the rail joins. The Ravenswood siding demonstrates the earliest form of rail joint technology developed in England, and existing in Australia, the joint chair. In part of the siding the sequence of joint and intermediate chairs is consistent with the 1856 specifications, that sequence is rare with the joints secured in joint chairs. The survival of chairs in this sequence is rare and almost certainly demonstrates that they remained in continuous use at the same location from 1862 to 1988. This remnant of the Ravenswood siding has survived 126 years. The siding has proved to be the most significant of extant remnant double-headed sidings in Victoria, containing a rare combination of early permanent way technologies. Construction dates 1862, Info from Ravenswood Railway Siding Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/4693/download-report The remaining section of this siding is significant at the State and National levels in that it demonstrates the use of chaired rail by the Victorian Railways Department for the Trunk Lines and, more particularly, the following stages in the evolution of this long obsolete method of permanent way construction: a) The use of joint chairs and intermediate chairs at regular intervals inferring that the original wrought iron rail lengths were 12 feet, as is known through documentary sources to have been the case. The survival of chairs in this sequence is unique and almost certainly demonstrates that they have remained in continuous use at the same location and in the same sequence from 1862 to 1988 . b) The use of joint chairs and intermediate chairs designed for use with trenails. c) The use of later intermediate chairs designed for use with steel pins and the use of fished joints with steel double head chaired rail, representing a second method of constructing the permanent way using chaired rail technology. info from Ravenswood Siding - Melbourne/Echuca Railway Line - Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/70103/download-report Addition to Citation for Melbourne to EchucaRailway Line 1/10/1990 Double Head Rail The surviving lengths of double head rail with chairs on this railway compare with one surviving similar remnant on the Geelong to Ballarat railway and are representative of permanent way construction techniques applied exclusively to the two trunk railways of the 1860's. In this respect they are rare survivors and may be unique at the national level and of technical importance at the international level to the extent that they enhance contemporary understanding of early railway building technology. Surviving lengths of chaired double head rail survive at Kyneton, Ravenswood and Bendigo on this railway and include a number of different types of cast iron intermediate and joint chairs with hardwood keys and metal pins. The Ravenswood siding is of special significance for the diversity of chair types and for the sequence of chairs recalling rail lengths known to be associated with construction of the line in 1862. Construction of the Railway Tenders closed on 24 March 1858 with no less than 133 tenders being received. A contract was let to Cornish and Bruce for £3,356,937 to commence work on 1 June 1858 and complete the line by 31 July 1861. Cornish and Bruce made quick early progress with the Melbourne to Sunbury section being officially opened on 13 January 1859. The line was officially opened to Bendigo (Sandhurst) on 20 October 1862 by the Governor of Victoria, Sir Henry Barkly. A great banquet was held for 800 guests and this was followed by a grand ball. The extension of the line to Echuca was a relatively simple matter as that part of the line was across plain country without any significant engineering challenges. Tenders were called for the work in 1863 and the work was completed in 1864 by contractors Collier and Barry Apart from the line contractors, other firms directly involved were J Shire law and Co (sleepers), R Fulton, Langlands Brothers and Co, William Crossley (water supply), B Moreland, Langlands Brothers and Co (platelayers lorries), E Chambers (iron pins, traversers), Miller and McQuinstan (luggage vans and steam engines) and various contractors for building works. Info from Engineers Australia Engineering Heritage Victoria Nomination for Recognition under the Engineering Heritage Australia Heritage Recognition Program for the Goldfields Railways - Melbourne , Bendigo & Echuca Railway Page 25 - .2.9.2 Statement from National Trust of Australia (Victoria) Listing number B5323 for Mt Alexander/Murray Valley Rail Line: Page 69 - Theme 3 https://www.engineersaustralia.org.au/portal/system/files/engineering-heritage-australia/nomination-title/Melbourne_%20Bendigo_Echuca%20Railway%20Nomination.pdf The Melbourne, Mount Alexander and Murray River Railway Company was a railway company in Victoria, Australia. It was established on 8 February 1853 to build a railway from Melbourne to Echuca on the Victorian-NSW border and a branch railway to Williamstown. The company struggled to make any progress and on 23 May 1856, the colonial Government took over the Company and it became part of the newly established Department of Railways, part of the Board of Land and Works. The Department of Railways became Victorian Railways in 1859. Construction of the Bendigo line commenced in 1858, but this private consortium also met with financial difficulties when it was unable to raise sufficient funds, and was bought out by the Victorian colonial government. The design work was then taken over by Captain Andrew Clarke, R. E., Surveyor-General of Victoria, with bridge designs completed by Bryson and O'Hara The contract for the first stage of the line from Footscray to Sandhurst (now Bendigo), was let to Cornish and Bruce for £3,356,937.2s.2d ($6.714 million) with work commencing on 1 June 1858. Completion of the permanent way was to be by 31 July 1861 https://en.wikipedia.org/wiki/Melbourne,_Mount_Alexander_and_Murray_River_Railway_Company Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Victorian Railways : report of the Board of Land and Works November 1862 GP V 1862/63 no. 21 (2.8 MB) https://www.parliament.vic.gov.au/papers/govpub/VPARL1862-63No21.pdfHistoric - Victorian Railways - Double Headed rail Ravenswood Railway Station and Siding Victorian Heritage Database Reports Victorian Heritage Register VHR H1100 Victorian Heritage Register VHR H1786 National Trust VHR H1100 Mount Alexander and Murray River Rail way Line National Trust2 rail lengths of Double Headed Rail made of Iron makers marks : Wilson & Cammell - Dronfield - Steel and 20 joint chairs with metal rail pins Makers mark Wilson & Cammell - Dronfield - Steel (possible date 187? very hard to read ) puffing billy, double headed rail, wilson & cammell - dronfield - steel works, ravenswood station siding, melbourne to echuca rail line, initially known as the melbourne, mt alexander and murray river railway. -
Puffing Billy Railway
D21 - Diesel Mechanical locomotive, 1968
D21 - Diesel Mechanical locomotive Date built - 1968 Original owner - TGR Original gauge - 1067mm Withdrawn - 1983 Built to 3'6" gauge in 1968 by the Tasmanian Government Railways and numbered V12, ownership of this Diesel Mechanical locomotive was transferred to Australian National Railways (Tas.) in 1978. It was withdrawn and sold to the E.T.R.B. in 1983 1968 - D21 ex-Tasmanian Government Railways (TGR) V class No.12, built by the TGR Launceston Workshops in 1968 to a design of Vulcan-Drewry (England). Tasmanian Government Railways V class The V class were the first diesel locomotives operated by the Tasmanian Government Railways (TGR) with four delivered by the Vulcan Foundry in 1948 to a design by the Drewry Car Co. They were a narrow gauge version of the British Rail Class 04. In 1951 a fellow two were delivered followed by another two in 1955. Between 1959 and 1968 the TGR built a further four at its Launceston Workshops. Two identical locomotives were purchased by the Mount Lyell Mining and Railway Company in 1953. When it closed in 1963, 2405 was sold to the Emu Bay Railway as number 22, while 2406 went to the TGR as V13. All the TGR units were withdrawn between 1983 and 1987 while the Emu Bay unit remained in service until 2000. Ten have been preserved: V1 by the Bellarine Peninsula Railway, Victoria V2 by the Don River Railway V4 by the Hotham Valley Railway, Western Australia V5 by the Hotham Valley Railway, Western Australia V7 by the Derwent Valley Railway V8 by the Bellarine Peninsula Railway, Victoria V9 by the West Coast Wilderness Railway V12 by the Puffing Billy Railway, Victoria (regauged to 760 mm gauge and numbered D21) V13 by the Zig Zag Railway, New South Wales, sold to the West Coast Wilderness Railway, renumbered D2 22 by the West Coast Wilderness Railway, renumbered D1 Tasmanian Government Railways V class Manufacturer Vulcan Foundry Tasmanian Government Railways Entered service 1948 Number built 14 Number preserved 10 Fleet numbers TGR: V1-V13 Emu Bay: 22 Power: 152kW (204hp) or 114kW (153hp) Motor: Gardner 8L3 (V) or Gardner 6L3 (VA) Wheel Arrangement: - C - Weight: 25.6t Allowable load on 1:40 grade: 170t Length over headstocks: 6.8m (22ft 6in) Introduced: 1948 Built By: Vulcan Foundry, England; TGR Workshops, Launceston; Using parts supplied by Drewry Car Co (UK) Number Preserved: 10 Number In Service: 0 Total Number Built: 14Historic - Tasmanian Government Railways - Diesel Mechanical locomotive - V12 / Puffing Billy Railway Diesel Mechanical locomotive D21D21 - Diesel Mechanical locomotive made of steel D21diesel mechanical locomotive, puffing billy, d21, v12 diesel mechanical locomotive, d21 diesel mechanical locomotive, tasmanian government railways -
Wangaratta RSL Sub Branch
Framed Document, Instrument of Surrender of Japanese Forces
With the Japanese cities of Hiroshima and Nagasaki destroyed by atomic weapons, the will of the Japanese leadership was tested Emperor Showa of Japan announced his intention to surrender to the Allies unconditionally over public radio on 15 Aug 1945. The date of Japan's formal surrender was 2 Sep 1945, and it took place aboard American battleship Missouri in Tokyo Bay. There were other surrender ceremonies including that on Sept 6 1945. At 0900 hours, sloop HMS Hart picked up Hitoshi Imamura and Jinichi Kusaka at Kabanga Bay, who would sign the surrender documents aboard HMS Glory at 1127 hours which surrendered 139,000 remaining personnel at Rabaul plus all forces in Australian territory in the South Pacific. The surrender of Imperial Japan was announced on August 15 and formally signed on September 2, 1945, bringing the hostilities of World War II to a close. The surrender ceremony at Rabaul, New Britain took place on 6 Sep 1945 aboard the British carrier HMS Glory surrendering 139,000 remaining personnel at Rabaul plus all forces in Australian territory in the South Pacific. Light brown frame with glass, of a black and white photocopy. Script is very ornate and has Japanese lettering at the bottom. Instument of Surrender of Japanese Forces in New Guinea, New Britain, New Ireland, Bougainville and adjacent Islands. I the Commander in Chief of the Japanese Imperial Southeastern Army, hereby surrender to the General Officer Commanding First Australian Army all Japanese Armed Forces under my command in accordance with the Instrument of Surrender issued by the Japanese Imperial General Headquarters and Government and General Order No.1 Military and Naval issued by the Japanese imperial General Headquarters. I will henceforth and until otherwise directed by you or your successor carry out the orders issued by you or your staff on your behalf to the best of my ability and I will take action to ensure that my subordinate commanders carry out the orders issued by your representatives. Commander in Chief Japanese Imperial Southeastern Army. Received on board H.M.S. Glory off Rabaul at 1130 hours sixth day of September 1945. Lieutenant General General Officer Commanding First Australian Army.wwii, world war 2, imperial japanese army, japanese army, surrender, rabaul -
Wangaratta RSL Sub Branch
Honour Board, Signware, Legion of Ex-Servicemen & Women
Legion of ex Servicemen and Women - Wangaratta Branch Honour Board containing names of Office Bearers from 1985 to 2002.The Australian Legion of Ex-Servicemen and Women (Vic) Ltd (The Legion) is an ex-service based not for profit association. Formed in December 1944 from a number of existing organisations, membership of the legion is open to all ex-service personnel, including British Commonwealth and Allied personnel, and former members of the peace-time Australian regular and reserve forces, their families, relatives and other persons who abide by and are accepted in accordance with the Constitution.Solid piece of wood with gold writing, has five columns listing the year President, Vice-President Secretary, Treasurer, dating from 1985 to 2002.Legion of ex-servicemen & women, Wangaratta Branch, 1985 - 2002. Signware 5721 2430. wangaratta, legion, ex-servicemen & women -
Wangaratta RSL Sub Branch
Framed Print, SS SUEVIC
In 1901 after completing her maiden voyage to Australia "Suevic" was used to transport Australian troops to and from the Boer War in South Africa. SUEVIC was requisitioned by the British Government during World War I but maintained its commercial route and was used for bringing provisions and troops from Australia to Europe. SS SUEVIC 1901-1942 White Star Line. SUEVIC and her sister ship RUNIC served as troopships transporting service personnel for duty overseas during WW1Timber framed print of a ship at sea. The grey mount has signatures in white paint across the top and sides.SS SUVIC Commander Edwin English ss suevic, ww1, troopship, boer war -
Wangaratta RSL Sub Branch
Framed Photograph, HMAT Nestor
... II evacuated British children to Australia. She completed her ...This photograph depicts HMAT Nestor departing Melbourne 2nd October 1916 with Australian Troops During WW1 HMAT Nestor mainly carried troops to England including the 6th reinforcements of the 57th 58th & 60th Battalions, 16th reinforcements of the 21st 22nd 23rd & 24th Battalions and 21st reinforcements of the 5th 6th 7th & 14th Battalions.During World War I HMAT Nestor was a troopship for the Australian Expeditionary Force, and in World War II evacuated British children to Australia. She completed her final round voyage to Australia in 1950. Carved timber frame containing sepia coloured photograph of ship being towed by tug boat from wharf crowded with people HMAS NESTOR Departed Melbourne 2nd October, 1916 History on paper attached to glass,hmat nestor, troopship -
Wangaratta RSL Sub Branch
Framed Medal, Gallipoli Star
The Gallipoli Star and its ribbon were designed in 1917 by R K Peacock, but official approval from King George V for the proposed campaign medal was withdrawn after the ribbon, but not the medal, had been manufactured, because it was to have been presented only to Australians and New Zealanders, but not British or other Empire soldiers involved in the campaign. Some Anzac veterans are known to have been issued with lengths of ribbon during the war in anticipation of the medal's production. In 1990, Mr Ross Smith, a former Australian Army Warrant Officer and Vietnam veteran, arranged, at his own expense, for dies from the original design to be manufactured, and for A J Parkes & Co Pty Ltd, of Brisbane, to strike 1000 examples of the medal. 200 of these stars were presented to surviving Australian and New Zealand Gallipoli veterans to mark the 75th anniversary of the campaign. The remainder were sold to the public. A further 1000 were later struck for sale to collectors. The design features an eight pointed star, representing the states and territories of Australia (seven points) and New Zealand. The colours of the ribbon are blue, representing the ocean, gold, representing Australian Wattle, silver grey, representing New Zealand fern, and red for the colour of Australian gum blossom and the New Zealand Rata flower. This full size accurate replica was presented in the early 1990's to the remaining survivors of the 1915 Gallipoli landing. The Gallipoli Star Medal 1914-1915 was to be awarded to survivors of the Anzac landing but a political dispute of the exclusion of British Soldiers saw the idea withdrawn. Timber look frame containing medal on yellow/blue/red ribbon and paper with black writing on grey cardboard surround.gallipoli star, medal, 1914-1915 -
Wangaratta RSL Sub Branch
Framed print, The Great Grey Raider
... the Australian coast and in both the Indian and the Pacific Oceans... the Australian coast and in both the Indian and the Pacific Oceans ...On the night of August 24, 1941 HMS Kanimbla, with 300 Indian troops on board led a flotilla in a surprise attack on the Iranian port of Bandar Shahpur capturing eight German and Italian merchant vessels all containing valuable cargoes, as well as two Iranian gunboats and a floating dock. Kanimbla went alongside the burning Italian tanker Bronte and fought the fires while engaging a train with her main armament and with her 3-inch guns. She remained in the region until October 11, supervising the port and carrying out salvage work on the captured vessels, including salvage work on the German freighter Hohenfels. After further work in Indian waters during the latter part of October and November, Kanimbla proceeded to Singapore and escorted the first convoy out of that city after the Japanese attack on Malaya. She arrived in Melbourne on Christmas Day. She carried out further convoy work off the Australian coast and in both the Indian and the Pacific Oceans. At the end of the war HMAS Kanimbla was employed in repatriating Australian servicemen from the Pacific Islands and also in returning Dutch dependents to the East Indies (Indonesia). Between October 1946 and June 1948 she sailed between Australia and Japan transporting British Commonwealth Occupation Forces. MS Kanimbla was unique for many reasons, she was the only passenger liner in history to have a fully operational radio broadcasting station built into the ship at the time of construction. The equipment was manufactured by AWA in Australia and had been shipped to Ireland for installation whilst the ship was still under construction.Brown timber frame housing white mount and dark blue print with grey ship in the centre above list of names below and top right and left corners.THE GREAT GREY RAIDER Captured 22 Ships, / Floating Dock, / 1Train Ships captured: Weissenfels, Wildenfels, V. Mayakovsky, Sheng Wha, Marienfels, Karakoram, Hathor, Winford, Sturmfels, Hohenfels, Store Nordiske, Tonjer, Chahbaaz, Barbara, Talisman, Corona, Carboto, Dah Pu, Sygna, Gabon, Bronte, Agnes Pre War: M.V. Kanimbla, McIlrath McEachern Line, 12000 Tons War: Commissioned as H.M.S. & Later H.M.A.S as armed Merchant Cruiserkanimbla, great grey raider, hohenfels, bronte, ww2, 1941 -
Wangaratta RSL Sub Branch
Red Sash
In the Australian army (whose regimental traditions are largely those of the British army) the red sash is worn by sergeants and warrant officers on ceremonial parades-the sash and it's colour came from it being used to drag wounded soldiers out of the battle line and to the rear in the times when battle was a close quarters fight.In the Australian army (whose regimental traditions are largely those of the British army) the red sash is worn by sergeants and warrant officers on ceremonial parades-the sash and it's colour came from it being used to drag wounded soldiers out of the battle line and to the rear in the times when battle was a close quarters fight.Two red sashes made from woven fabric with red cording/fringe at both endsNilred sash, army, ceremonial -
Wangaratta RSL Sub Branch
Badge - 1914 Imperial Reservists, c1914
British Imperial Reservists (IRs) who were living in Australia were recalled to the British Expeditionary Forces in World War One (WWI). Reservists sailed from Melbourne, Victoria on the HMAT Miltiades as part of the first convoy (Convoy 1) of troops leaving Australia in October 1914.Gold badge with crown on top, blue around outside, with Union Jack and Red Ensign in the middle. Has a horse shoe hook on back with a number.On front: 1914 Imperial reservists Assn, Australia. On back: One has 96, the other 69.wwi, world war 1, imperial reservists, australia -
Wangaratta RSL Sub Branch
Framed print, Menin Gate at Midnight
... guineas and presented to the Australia Government by British... high-country The original art piece was painted by Australian ...The original art piece was painted by Australian artist Will Longstaff after he attended the unveiling ceremony of the Menin Gate memorial at the entrance of the Belgian town of Ypres in 1927. The memorial is inscribed with the names of 54,000 British and Commonwealth soldiers killed in Flanders with no known grave. More than 6000 are Australians. It was purchased in 1928 for 2000 guineas and presented to the Australia Government by British Philanthropist Lord WoolavingtonThe image commemorates those soldiers with no marked graves who died on the Western Front during the First World War.Dark wooden frame of a dark blue coloured print with large cream coloured arched monument in distance.MENIN GATE AT MIDNIGHT by Will Longstaff Presented by Lord Woolavingtonmenin gate, will longstaff, lord woolavington, ww1 -
Wangaratta RSL Sub Branch
Poster - Framed poster
Item displays images of Australian Army badges of rank and special qualifications.The rank system forms the backbone of the Australian Army’s structure and defines a soldier or officer’s role and degree of responsibility. The ranks are based upon those of the British Army, although there are some differences in the way they are displayed. Brown timber and gold painted frame containing poster showing Australian Army badges against a white background. Badges arranged by rank as follows: commissioned officers, warrant and non-commissioned officers and specialist qualification badges.Australian Army Badge of Rankarmy, australia, badges of rank -
Geelong Cycling Club
Print, Careys Picture Framing Gallery, Circa 1950
... in 1952. He also represented Australia in the 1950 British Empire... in 1952. He also represented Australia in the 1950 British Empire ...Russell Mockridge b1928 d1958 was described 'as the greatest cyclist of all time'. He died during a race in collision with a bus that also claimed the lives of two fellow riders and a spectator. Mockridge started in 1946 by winning his first race of 40km with the Geelong Amateur Cycling Club. His wins soon earned him the nickname of the Geelong Flyer. He represented Australia at the London Olympic Games in 1948 and the Helsinki Games in 1952. He also represented Australia in the 1950 British Empire Games in Auckland where he took gold in the 1000 sprint and the 1000m time trial and silver in the 4000m pursuit. In Paris 1952 he won the Amateur Grand Prix and the following day the Open Grand Prix, beating world professional champion Reg Harris. Later that year he won Manchester Wheelers Club Muratti Cup again beating Reg Harris. He turned professional a year later and teamed with Sid Patterson and Roger Arnold to win the Paris 6 day race in 1955. Mockridge was one of 60 of 150 entrants to finish the 1955 Tour de France. He won 12 consecutive Australian championships. Mockridge was married and had a daughter, Melinda (1955)Russell Mockridge was described 'as the greatest cyclist of all time'. He achieved international notoriety as a cyclist from the mid 1940s until his death in 1958, representing Australia in the Olympic games, the Commonwealth Games, The Tour de France and other international high profile cycling events.Framed print of Russell Mockridge in cycling attire. Head and shoulders depiction. Mockeridge is wearing a leather cycling helmut and white cycling shirt typical of cycling gear of that era. The frame is wooden with gold mount and has a wire hanger on the reverse side.geelong cycling club; geelong amateur cycling club; geelong west cycling club; geelong flyer; russell mockridge; olympic games; tour de france; -
The Foundling Archive
Application for air crew, Royal Australian Air Force - Application for air crew George Argo Turner (sr), c1938-1945
Here, we learn that George Argo Jr, attended Scotch College in Melbourne between 1931-1937, and that is parents (George Argo Sr and Bertha) were British. they all live at 3 Hotham Street East St. Kilda at this time. Blue paper , black inkRoyal Australia Air Force letterhead social history, victoria, school, autralian military forces -
Wangaratta RSL Sub Branch
Minature Model Aircraft
Kittyhawk Fighter. One of a collection of 25 model aircraft made by Brian Anthony DOWD The Curtiss P-40 Warhawk is an American single-engined, single-seat, all-metal fighter and ground-attack aircraft that first flew in 1938. The British Commonwealth air forces used the name Kittyhawk for models equivalent to the P-40D and all later variants.The Kittyhawk was the main fighter used by the RAAF in World War II, in greater numbers than the Spitfire. Two RAAF squadrons serving with the Desert Air Force, No. 3 and No. 450 Squadrons, were the first Australian units to be assigned P-40s. Small khaki plane with blue & white spots on top and sides, red nose.model airplanes, kittyhawk fighter. -
Wangaratta RSL Sub Branch
Framed copy of photograph and map, Lt. Albert Sargent
... British and Australian members of Z Special Unit travelled from ...Lieutenant Albert Sargent VX15290 was born on the 3rd of November, 1918 at Wangaratta in Victoria. He was a member of Z Special Unit and involved in Operation RIMAU. when he was captured and executed by the Japanese in Malaya on the 7th of July, 1945 during WW2. Operation RIMAU - In September, 1944, 23 British and Australian members of Z Special Unit travelled from Australia by submarine to the outskirts of Singapore Harbour then under Japanese occupation. Their mission was to attack and destroy enemy shipping from small submersible boats using magnetic limpet mines. Official Japanese records state that the ten men of the contingent captured were beheaded at Pasir Panjang on 7 July 1945, approximately one month before World War II in the Pacific came to an end.Brown timber frame and green mount containing a copy of photograph of soldier and map showing RIMAU battles and listing RIMAU personnel.Lt Albert Sargent Operation RIMAUoperation rimau, albert sargent, z special unit, vx15290, wangaratta, ww2 -
Wangaratta RSL Sub Branch
Photograph, Frank Ramage
Photograph of Wangaratta RSL Life Member Frank Ramage taken wearing WW2 Army uniform and slouch hat. Frank joined the C.M.F in 1943 and transferred to the 6th Field Ambulance A.I.F. in 1944 and discharged in 1946. He served in New Guinea and New Britain Frank Ramage joined the R.S.L. in 1956 and was made a Life Member in 1996Black plastic frame containing photocopy of photograph of soldier wearing slouch hat.frank ramage, 6th australian field ambulance, ww2, rsl life member, wangaratta rsl sub branch