Postcard. Miss Dolly Castles. Thanks for card. 30/10/05. Rear. Addressed to Miss Pethard, Fir Street Golden Square. 3555. From Beta.

The Melbourne and Metropolitan Board of Works (MMBW) plans were produced from the 1890s to the 1950s. They were crucial to the design and development of Melbourne's sewerage and drainage system. The plans, at a scale of 40 feet to 1 inch (1:480), provide a detailed historical record of Melbourne streetscapes and environmental features. Each plan covers one or two street blocks (roughly six streets), showing details of buildings, including garden layouts and ownership boundaries, and features such as laneways, drains, bridges, parks, municipal boundaries and other prominent landmarks as they existed at the time each plan was produced. (Source: State Library of Victoria)This plan forms part of a large group of MMBW plans and maps that was donated to the Society by the Mr Poulter, City Engineer of the City of Kew in 1989. Within this collection, thirty-five hand-coloured plans, backed with linen, are of statewide significance as they include annotations that provide details of construction materials used in buildings in the first decade of the 20th century as well as additional information about land ownership and usage. The copies in the Public Record Office Victoria and the State Library of Victoria are monochrome versions which do not denote building materials so that the maps in this collection are invaluable and unique tools for researchers and heritage consultants. A number of the plans are not held in the collection of the State Library of Victoria so they have the additional attribute of rarity.Original survey plan, issued by the MMBW to a contractor with responsibility for constructing sewers in the area identified on the plan within the Borough of Kew. The plan was at some stage hand-coloured, possibly by the contractor, but more likely by officers working in the Engineering Department of the Borough and later Town, then City of Kew. The hand-coloured sections of buildings on the plan were used to denote masonry or brick constructions (pink), weatherboard constructions (yellow), and public buildings (grey). Surveyed by the Board of Works in 1903 and published in 1904, Plan No.1590 shows development north of Cotham Road. While this plan includes built structures in Mary Street, Cotham Road, High Street, Park Hill Road, Kent Street, Ridgeway Avenue, and Ermington Lane (now Ermington Place), only part of this section was notated and coloured in this contractor’s copy. Numerous houses, large and small are named on the plan: ‘Cholula’, ‘Belper’, ‘The Uplands’, ‘Spring Grove’ facing Cotham Road; ‘Marion’ facing Kent Street; and ‘Kia Ora’ facing Ridgeway Avenue.melbourne and metropolitan board of works, detail plans, mmbw 1590, survey plans - borough of kew, cartography

The Melbourne and Metropolitan Board of Works (MMBW) plans were produced from the 1890s to the 1950s. They were crucial to the design and development of Melbourne's sewerage and drainage system. The plans, at a scale of 40 feet to 1 inch (1:480), provide a detailed historical record of Melbourne streetscapes and environmental features. Each plan covers one or two street blocks (roughly six streets), showing details of buildings, including garden layouts and ownership boundaries, and features such as laneways, drains, bridges, parks, municipal boundaries and other prominent landmarks as they existed at the time each plan was produced. (Source: State Library of Victoria)This plan forms part of a large group of MMBW plans and maps that was donated to the Society by the Mr Poulter, City Engineer of the City of Kew in 1989. Within this collection, thirty-five hand-coloured plans, backed with linen, are of statewide significance as they include annotations that provide details of construction materials used in buildings in the first decade of the 20th century as well as additional information about land ownership and usage. The copies in the Public Record Office Victoria and the State Library of Victoria are monochrome versions which do not denote building materials so that the maps in this collection are invaluable and unique tools for researchers and heritage consultants. A number of the plans are not held in the collection of the State Library of Victoria so they have the additional attribute of rarity.Original survey plan, issued by the MMBW to a contractor with responsibility for constructing sewers in the area identified on the plan within the Borough of Kew. The plan was at some stage hand-coloured, possibly by the contractor, but more likely by officers working in the Engineering Department of the Borough and later Town, then City of Kew. The hand-coloured sections of buildings on the plan were used to denote masonry or brick constructions (pink), weatherboard constructions (yellow), and public buildings (grey). That area of Kew bordered by Cotham Road, Park Hill Road, Ermington Lane (now Ermington Place), and Belmont Avenue contained some of the significant homes owned by Kew pioneers. Chief among these was ‘Park Hill’ on an enormous lot facing Park Hill Road. The Jubilee History of 1910 noted, six years after this plan was drawn, that: ‘Park Hill Road, forming the southern boundary of the cemetery, takes its name from Park Hill, the residence of Mr. Thomas Judd, who has resided there since December, 1852.’ Other named houses on the plan include ‘Ferndale’ facing Cotham Road; ‘Ermington’ adjacent to Judd’s Park Hill, facing Park Hill Road; and ‘Gilden’ and ‘Mont Belmont’ facing Belmont Avenue. Mont Belmont was designed by the architectural firm of Reed, Henderson and Smart for William George Lilley in 1887 and was completed in 1888. Lilley was Mayor of Kew in 1887-88, a Justice of the Peace and a member of the first Board of Guardians of Kew’s St. Hilary’s Church of England.melbourne and metropolitan board of works, detail plans, survey plans - borough of kew, mmbw 1591, cartography

The Melbourne and Metropolitan Board of Works (MMBW) plans were produced from the 1890s to the 1950s. They were crucial to the design and development of Melbourne's sewerage and drainage system. The plans, at a scale of 40 feet to 1 inch (1:480), provide a detailed historical record of Melbourne streetscapes and environmental features. Each plan covers one or two street blocks (roughly six streets), showing details of buildings, including garden layouts and ownership boundaries, and features such as laneways, drains, bridges, parks, municipal boundaries and other prominent landmarks as they existed at the time each plan was produced. (Source: State Library of Victoria). This plan forms part of a large group of MMBW plans and maps that was donated to the Society by the Mr Poulter, City Engineer of the City of Kew in 1989. Within this collection, thirty-five hand-coloured plans, backed with linen, are of statewide significance as they include annotations that provide details of construction materials used in buildings in the first decade of the 20th century as well as additional information about land ownership and usage. The copies in the Public Record Office Victoria and the State Library of Victoria are monochrome versions which do not denote building materials so that the maps in this collection are invaluable and unique tools for researchers and heritage consultants. A number of the plans are not held in the collection of the State Library of Victoria so they have the additional attribute of rarity.Original survey plan, issued by the MMBW to a contractor with responsibility for constructing sewers in the area identified on the plan within the Borough of Kew. The plan was at some stage hand-coloured, possibly by the contractor, but more likely by officers working in the Engineering Department of the Borough and later Town, then City of Kew. The hand-coloured sections of buildings on the plan were used to denote masonry or brick constructions (pink), weatherboard constructions (yellow), and public buildings (grey). In MMBW Plan No.1592, the pink line indicates that area of the plan for which the contracting engineer was responsible. Included in the Plan are a number of primarily brick villas in a section of Belmont Avenue off Cotham Road. The house ‘Uvadale’ north of Belmont Avenue, and facing Cotham Road is also included in the contract. Excluded from the contract but shown on the Plan are ‘Glendonald’, ‘Mont Belmont’ and ‘Gilden’.melbourne and metropolitan board of works, detail plans, survey plans - borough of kew, mmbw 1592, cartography

The Melbourne and Metropolitan Board of Works (MMBW) plans were produced from the 1890s to the 1950s. They were crucial to the design and development of Melbourne's sewerage and drainage system. The plans, at a scale of 40 feet to 1 inch (1:480), provide a detailed historical record of Melbourne streetscapes and environmental features. Each plan covers one or two street blocks (roughly six streets), showing details of buildings, including garden layouts and ownership boundaries, and features such as laneways, drains, bridges, parks, municipal boundaries and other prominent landmarks as they existed at the time each plan was produced. (Source: State Library of Victoria)This plan forms part of a large group of MMBW plans and maps that was donated to the Society by the Mr Poulter, City Engineer of the City of Kew in 1989. Within this collection, thirty-five hand-coloured plans, backed with linen, are of statewide significance as they include annotations that provide details of construction materials used in buildings in the first decade of the 20th century as well as additional information about land ownership and usage. The copies in the Public Record Office Victoria and the State Library of Victoria are monochrome versions which do not denote building materials so that the maps in this collection are invaluable and unique tools for researchers and heritage consultants. A number of the plans are not held in the collection of the State Library of Victoria so they have the additional attribute of rarity.Original survey plan, issued by the MMBW to a contractor with responsibility for constructing sewers in the area identified on the plan within the Borough of Kew. The plan was at some stage hand-coloured, possibly by the contractor, but more likely by officers working in the Engineering Department of the Borough and later Town, then City of Kew. The hand-coloured sections of buildings on the plan were used to denote masonry or brick constructions (pink), weatherboard constructions (yellow), and public buildings (grey). The laborious task of hand-tinting these Board of Works plans was not without hazards as is evidenced by Plan No. 1593. On the Plan, the original colourist spilt black and green ink, partially obscuring some parts. The most obvious casualty is ‘Clifton’ located on the corner of Cotham Road and Park Street [now Adeney Avenue]. Included in this Plan, and outlined in pink is that part of the section that the contracting engineer was tasked with completing. This included sewering on both sides of this part of Cotham Road, but excluded properties such as ‘Glendonald’ and ‘Monnington’. This area was to undergo a series of subdivisions including the ‘Clifton Estate’, which created housing lots on Adeney Avenue and Florence Avenue in 1916. The most notable occupant of Clifton was William Adeney [died 1893], a pioneer of Camperdown, after which Park Street was later renamed.melbourne and metropolitan board of works, detail plans, survey plans - borough of kew, mmbw 1593, cartography

James Venn Morgan was known affectionately as ‘The Father of Kew’. Born in Somersetshire on February 21, 1823, he sailed to Australia in April, 1851. James V. Morgan, was a member of one of the first parties to leave for the diggings. At Chewton, near Castlemaine his party tried their luck in an abandoned shaft, and in two weeks returned to Melbourne after having won 35lb weight of gold. James Venn Morgan was content with his success, and induced his partners to invest their money with him in land. After obtaining the advice of a friend, the party negotiated with Mr Samuel Watts, of Collingwood, who had recently purchased land from the Crown, and from him they took over at £15 an acre about 32 acres of land in the district that is now known as Kew. This land extended from where the Kew Post-office now stands to the locality of the Boroondara Cemetery. Here it was that Mr Morgan decided to settle, and, after having had the land surveyed, the partners apportioned it by drawing straws for the four sections into which it had been divided. One of them sold his holding later in the year for £100 an acre, and was sorry for it afterwards. In 1853 Mr. Morgan built the first house in Kew, and this house is the one in which he still resides. Here with his wife, he settled down to market gardening and dairying. So successful was the new venture that he induced his father and other members of the family to come out to Australia to assist him. Gradually the district became settled, Mr. Morgan parted with a portion of his holding, and subdivided and built on the remainder, which he still retained. In 1884 he found himself in a position to retire from active business.He celebrated his 100th birthday in 1923. He was later to die in the same year. The Argus, 17 January 1923.Rare and historic hand-tinted framed portrait of one of the founding pioneers of the district.Hand tinted photograph in a gilt frame of the Kew pioneer James Venn Morgan (1823-1923).james venn morgan, kew - pioneer families, kew - landowners

James Venn Morgan was known affectionately as ‘The Father of Kew’. Born in Somersetshire on February 21, 1823, he sailed to Australia in April, 1851. James V. Morgan, was a member of one of the first parties to leave for the diggings. At Chewton, near Castlemaine his party tried their luck in an abandoned shaft, and in two weeks returned to Melbourne after having won 35lb weight of gold. James Venn Morgan was content with his success, and induced his partners to invest their money with him in land. After obtaining the advice of a friend, the party negotiated with Mr Samuel Watts, of Collingwood, who had recently purchased land from the Crown, and from him they took over at £15 an acre about 32 acres of land in the district that is now known as Kew. This land extended from where the Kew Post-office now stands to the locality of the Boroondara Cemetery. Here it was that Mr Morgan decided to settle, and, after having had the land surveyed, the partners apportioned it by drawing straws for the four sections into which it had been divided. One of them sold his holding later in the year for £100 an acre, and was sorry for it afterwards. In 1853 Mr. Morgan built the first house in Kew, and this house is the one in which he still resides. Here with his wife, he settled down to market gardening and dairying. So successful was the new venture that he induced his father and other members of the family to come out to Australia to assist him. Gradually the district became settled, Mr. Morgan parted with a portion of his holding, and subdivided and built on the remainder, which he still retained. In 1884 he found himself in a position to retire from active business. He celebrated his 100th birthday in 1923. He was later to die in the same year. The Argus, 17 January 1923.Rare and-tinted framed photograph af Annie Morgan, the wife of one of the founding pioneers of the district.Hand tinted photograph in a gilt frame of Anna Morgan (nee Chidgey), the wife of James Venn Morgan. Anna Morgan was the wife of one of Kew's earliest pioneers and landowners. She died in 1915.anna morgan, kew - pioneers

Studio portrait in Cabinet Card format of John Watson, the father of Mrs Ivory.Reverse: "Donated by Mrs Ivory / taken approx 1890s / Albert John Watson aged 12 / Hawthorn College"albert john watson

The Melbourne artist Alma Agnes Marion Figuerola, was the daughter of Juan Pedro Narciso Figuerola (1869-1919) and Alice Lucinda Walker Hanson (1889-1969). Each of their three daughters grew up to be involved in the arts: Alma as a painter; Carmen Irene (1906-1993) as a short story writer, poet and teacher of dancing; and Sylvia (also Silvia) Lyla Alice (1911-1992) as a composer and cellist. The first art lessons Alma Figuerola received were with Oscar Binder. Later she attended the art school established by the Melbourne 'tonalist' [Duncan] Max Meldrum (1875-1955). She graduated from his school in 1920, participating in her first group exhibition in the same year. Solo exhibitions of her work were to be held in 1933 at the Meldrum Gallery in Elizabeth Street, in 1937 and 1945 at the Athenaeum Gallery at 188 Collins Street, and in 1951 at Georges Gallery in Collins Street. Throughout her extensive career she participated in group exhibitions, usually with artists of the Meldrum School, and as a member of the Twenty Melbourne Painters, of which she was invited to become an associate in 1935. In 1953, her portrait of Professor ES Hills was entered in the Archibald Prize Competition of the Art Gallery of New South Wales. A resident of Kew from the 1930s - 51 Studley Park Road, often with her mother, her sister Carmen, or both - from c.1942 until her death she lived at 'D’Estaville', 7 Barry Street. From the late 1930s she is recorded as actively contributing to the arts at a local level. In 1939 and 1940 she participated in art exhibitions at the Hawthorn Municipal Library organised by Jessie Carbines. From 1944 to 1951 she co-organised successive Kew Arts Festivals, initially in the Presbyterian Church Hall in Highbury Grove and later at the Recreation Hall in Wellington Street. A foundation member of the Kew Historical Society in 1958, Alma Figuerola remained an active member of the Society until her death on 8 December 1970. She predeceased her two sisters who both died in the 1990s and who are buried at Andersons' Creek Cemetery in Warrandyte.Photograph of an unidentified mother and son from the Alma Figuerola photograph album. alma figuerola album, mendelssohn - photographer

A wooden racquet with a solid, convex throat and grooved handle. Decal logo on throat on obverse comprises of a winged ball, with inscription: VICTOR/.../SPORTING GOODS CO. Decal inscription across throat on reverse: CLUB. Illegible, hand carved monogram across right side of handle. Materials: Wood, Gut, Metal, Glue, Lacquer, String, Leather, Inktennis

A wooden racquet with a solid, convex throat, painted orange, and grooved handle. Decal logo on throat on obverse comprises of a winged ball, with inscription: VICTOR/.../SPORTING GOODS CO. Decal inscription across throat on reverse: CLUB. Materials: Wood, Gut, Metal, Glue, Lacquer, String, Leather, Ink, Painttennis

A wooden racquet with a solid, convex throat, painted orange, and grooved handle. Decal logo on throat on obverse comprises of a winged ball, with inscription: VICTOR/.../SPORTING GOODS CO. Decal inscription across throat on reverse: CLUB. Materials: Wood, Gut, Metal, Glue, Lacquer, String, Leather, Ink, Painttennis

A wooden, oval racquet with a solid convex throat, cloth tape supports, and fish-tail handle. Inscription across crown on obverse: THE DEMON. Model trademark is stamped on throat on obverse, featuring a horned demon's head device, with the text: THE/DEMON. Manufacturer's mark stamped across throat on reverse, comprises of a hexagram with the text: BEST IS BEST/S&S/L/THRO' THE WORLD. Materials: Wood, Gut, Metal, Glue, Lacquer, Cloth tapetennis

A Tryon Eclipse tennis racquet with a solid, convex throat, and fine-grooved handle. Details feature on obverse. Model name ECLIPSE features across crown. Inscription across throat: EDW. K. TRYON CO./PHILADELPHIA,/PA. Materials: Wood, Gut, Ink, Leather, Cloth, Glue, Lacquer, Metaltennis

A wooden tennis racquet with solid, convex throat, cloth whipping around shoulders, and fine grooved handle grip. Model name across crown on obverse is worn and unintelligible. Inscription along throat on obverse: T.H. PROSSER + SONS. Materials: Wood, Gut, Ink, Leather, Glue, Lacquer, Metal, Clothtennis

A Wright & Ditson 'The Hub' model tennis racquet with composite convex throat. Model name printed across crown on obverse. Name of manufacturer and place of origin (Boston, Mass. USA) printed across throat on obverse. Manufacturer's trademark/logo features across throat on reverse. Octagonal handle with makeshift leather end wrap attached with nails. Inscription on side of shaft: PATENTED JAN. 3, 05. Materials: Wood, Metal, Lacquer, Glue, Ink, Leather, Guttennis

A Wright & Ditson 'Longwood' model tennis racquet with convex laminated throat. Model name printed across throat on obverse . Manufacturer's trademark/logo features on shaft on reverse. . Manufacturer name and country of origin printed on right side of shaft. Small folded pieces of red leather used as cushioning under string loops on sides of throat. Materials: Wood, Metal, Lacquer, Glue, Ink, Nylon, Leather, Painttennis

A Wright and Ditson tennis racquet, with: laminated convex throat; single screw through shaft; and, fine-grooved, thick octagonal handle. Decal inscription across throat on obverse: WRIGHT/& DITSON/BOSTON/MASS./U.S.A. Model name across crown on obverse is illegible, but model is most likely a 'Longwood'. Materials: Wood, Lacquer, Glue, Metal, Paint, Ink, Leather, Guttennis

A Wright and Ditson 'Sears' tennis racquet, with: laminated convex throat; black-painted hide reinforcements around shoulders; and, fine-grooved, thick octagonal handle. Decal inscription across throat on obverse: SEARS. Wright & Ditson Championship logo, with tennis player on ball trademark feature on throat on reverse. Materials: Wood, Lacquer, Glue, Metal, Paint, Ink, Leather, Gut, Stringtennis

A Wright and Ditson 'Champion' tennis racquet, with: laminated convex throat; cloth tape reinforcements around shoulders; and, fine-grooved, thick octagonal handle. Decal inscription across throat on obverse: CHAMPION. Wright & Ditson Championship logo, with tennis player on ball trademark feature on throat on reverse. Patent details (JAN. 3 '05) featured along left side of shaft. Materials: Wood, Lacquer, Glue, Metal, Paint, Ink, Leather, Gut, Cloth tapetennis

A Spalding 'Geneva' tennis racquet, featuring: solid convex throat; and, fine-grooved, octagonal handle. 'A.G. Spalding & Bros. Made in U.S.A.' logo encircling ball trademark features on throat on reverse. Decal of model name features across throat on obverse. Materials: Wood, Lacquer, Glue, Metal, Ink, Nylon, Leather, String, Painttennis

A Spalding 'Tournament' model tennis racquet, featuring concave throat and fine-grooved wooden handle with leather end wrap and butt cloth . White reinforcement tape around shoulders. Manufacter logo features on throat on reverse. Model name features on throat on obverse. Manufacturer logo printed on butt cloth. Materials: Wood, Metal, Lacquer, Glue, Leather, Gut, Ink, String, Adhesive tapetennis

A Spalding 'Lakeside' model tennis racquet, featuring laminate convex throat & fine-grooved octagonal wooden handle. Leather end wrap and butt cloth. Model name printed on throat on obverse, and manufacturer logo printed on throat on reverse. Logo also printed on butt cloth. Materials: Wood, Metal, Lacquer, Glue, Gut, Ink, String, Leathertennis

Tennis racquet with solid, concave throat, red painted shoulders with string whipping, and fine grooved handle. Surname of a former owner written across shaft on obverse: HERBRANDT. Materials: Wood, Metal, Glue, Lacquer, Gut, Paint, String, Guttennis

Tennis racquet with solid, concave throat, red painted shoulders with string whipping, and fine grooved handle. Surname of a former owner written across shaft, and on cloth strip along lower handle, on obverse: HERBRANDT. Materials: Wood, Metal, Glue, Lacquer, Gut, Paint, String, Gut, Clothtennis

A Wright & Ditson 'The Park' model tennis racquet with solid convex throat. Rounded flat top head. Manufacturer name and place of manufacture printed across throat on obverse. Model name printed on crown on obverse. manufacturer trademark across throat on reverse. On side of shaft is printed: PATENTED,/JAN. 3, 05,. Fine grooved octagonal handle with leather end wrap. On leather butt cap is inscribed: B/E/200. Materials: Wood, Metal, Lacquer, Glue, Ink, Leather, Guttennis

A Wright & Ditson 'The Park' model tennis racquet with solid convex thoat. Transitional flat top-shaped head. Model name features across crown on obverse. Manufacturer name & details feature across throat on obverse. Manufacturer's trademark/logo features across throat on reverse. Octagonal fine-grooved handle and leather end wrap & butt cover. Inscription on side: PATENTED/JAN 3, 05. Materials: Wood, Metal, Lacquer, Glue, Ink, String, Leather, Guttennis

A Wright & Ditson 'Pim' model tennis racquet with composite convex throat. Rounded flat top head with cloth tape reinforcements around shoulders. Model name printed across throat on obverse. Manufacturer's trademark/logo features across throat on reverse. Fine-grooved octagonal handle and leather end wrap. On left side of shaft: PATENTED/JAN. 3, 05. On right side of shaft, manufacturer name and country of manufacture are printed. Materials: Wood, Metal, Lacquer, Glue, Ink, Leather, Gut, Cloth tapetennis

A Wright & Ditson 'Pim' model tennis racquet with composite convex throat. Rounded flat top head with cloth tape reinforcements around shoulders. Model name printed across throat on obverse. Manufacturer's trademark/logo features across throat on reverse. Fine-grooved octagonal handle, trace remains of leather end wra. Remains of butt cap printed with racquet care instructions, and manufacturer's name and location. On right side of shaft, manufacturer name and country of manufacture are printed. Red buffers lodged under string loops on sides of throat. Materials: Wood, Metal, Lacquer, Glue, Ink, Leather, Nylon, Cloth tapetennis

A wooden Horsman 'Model G' tennis racquet, with oriental gut (silk) strings, laminated convex throat, and, a rounded handle. Inscription across crown, on obverse: MODEL G. Horsman 'Centaur' trademark features on throat, on obverse. On throat, on reverse, is a moon-face sticker with inscr. 'THANKS' across top. Carved inscr. along shaft on obverse: ELMER. Materials: Wood, Metal, Lacquer, Ink, Glue, Silktennis