Photograph of Port Melbourne, typical scene of a large port in the 19th century, loading and unloading cargo from tall ships vial cranes and a network of rails and carriages.Photograph, black and white, framed, mounted on Masonite timber, behind glass. Several tall ships docked at a pier, with rails and carriages for cargo. Buildings on pier, small boats in water. Location is Williamstown, Melbourne. Victoria. Photographer is Charles Nettleton. Inscriptions below photograph and on backing board.Under matte at base of photo: "NETTLETON PHOTO" and "(undecipherable)" Handwritten on backing board "WILLIAMSTOWN, MELB., VIC."photograph, photo, flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, williamstown breakwater, breakwater, nettleton, charles nettleton, williamstown pier, 19th century williamstown

Black and white photograph of SEC No. 26, nearing completion of work to convert back to ESCo colours and California Open Combination tramcar. Photograph taken at St Aidans Drive, prior to foot boards and barrier rails being fitted. 30 or 31 October 1987. W.A.Doubleday in cabtrams, tramways, ballarat, st aidans drive , tram 26

Pamphlet - cut out from card with a hanging function or link for use on tramcar strap hanging rails, titled "Special Event Services", for the Grand Prix 14/3 to 17/3, produced by Yarra Trams and PTV. Gives gate details, times and contact numbers for queries.trams, tramways, grand prix, yarra trams, pamphlets, events

Kodachrome Transparency - 35mm slide - cardboard mount, with one side with red border and words "Kodachrome Transparency / Processed by Kodak" top and bottom. Photo taken by Ben Parle 8/4/1958. Has slide No. "5" stamped in black in top corner. Photo of the SEC Ballarat Ford welding truck, at the intersection of Macarthur St and Wendouree Parade, View Point Junction. Note tram stop signage. Three SEC workers in view, with road signage set up and truck connected to the overhead for welding work. Note bicycle leaning against truck. Welder - Weld For high resolution scan see btm2864.tif See Reg Item 7700 for another photo of the truck in the Power Station yard. "Drummond St. and View Point Junction Ballarat" / "8-4-58"tramways, trams, rails, welding, trucks

Yields information about the type and presentation of books or information folders that were sent to the Electric Supply Company of Victoria about tramway products available on the market and the company the produced them.Folder with 24 pages of advertising pamphlets bound into it with two metal clip binders advertising products available from the Railway Track-Work Company and titled ""Railway Track Equipment - Track Grinding Machines, Welding and Bonding Machines - Bonds, Welding Steel, Grinding Wheels and Blocks". Has brochures or pamphlets for: . The Universal Rotary Track Grinder . Reciprocating Track Grinder . The Atlas Rail Grinder . The Ajax Electric Arc welders .Vertical Rail Lifter . The Jackson Electric Tie Tamper. Generally the lead page of each pamphlet has been imaged. Provides a description of each item, along with method of operation and parts listing generally. The folder has on a number of pages and the back cover, a sticker from Frank R. Perrot (Now Perrot and Adams Ltd), Machinery Merchant of 394 Kent St Sydney. Railway Track-work Company , Clementine, Thompson and Mercer Sts, Philadelphia, Pennsylvania USA. For a full scan of the document see the hi res file.Numerous: Front cover sticky label "1620" in top left hand corner, "Mr Pringle" on front cover and stamp with words "Ballarat Tramway Preservation Society Catalogue No. 10" in ink on front cover. Inside front cover has a pencil note, behind the crease in the bottom right hand corner. On the first pamphlet "Ballarat Tramway Preservation Society Catalogue No. 10" in ink on top right hand corner. On parts page for the Reciprocating Track Grinder has the "Perrot and Adam Ltd" company stamp.trams, tramways, trackwork, equipment, rails

Record shows the condition of the rail head at many points throughout the Ballarat system. Gives the type of rail, its weight, gauge, location and date of measurement See item 9127 for a report on the Special Work. Some sections measured in May 1954, rest May 1955Demonstrates a detailed report into the condition and wear of the Ballarat Tramways trackwork in 1954/1955.Report - within a manila card folder with steel clips containing about 44 drawings on drawing paper of rail sections.Outside cover in ink "Legend Track Gauges"ballarat, secv, trackwork, rails, reports

The Pinnacle, The Grampians, Victoria. Note this photograph was taken before guard rails were placed on the Pinnacle.Coloured Photograph of a cliff face with a person sitting on the peak. The Pinnacles, The Grampians, Victoria. Post Card Printed in Great Britain The Valentine & Sons' Publishing Co., Ltd., Melbourne.halls gap grampians

This surfboard was ridden by Australian surfer, Layne Beachley at competitions around the world for the 2003 ASP Professional World Surfing Tour. In 2003 Layne won her record sixth straight World Professional Surfing Championship. Layne would go on to win the word title for a record 7th time in 2006. Layne Beachley learned to surf at Manly Beach in Sydney. She is the first woman in the history of sport to win 7 professional world titles.The surfboard is of world significance. It was ridden by Layne Beachley, Australia's most successful competitive surfer, when she won her record sixth straight World Professional Surfing Championship in 2003.Layne Beachley surfboard shaped by Stuart D'Arcy in 2003. The surfboard is a three fin, 5' 10" rounded pin with yellow rails and blue pin lines. The board was ridden by Layne Beachley when she won her record 6th straight World Professional Surfing championship in 2003.Boost, Gallez, Layne Beachley Reach for the Stars, Darcy and Oakley logos on decklayne beachley, stuart darcy, darcy surfboards, reach for the stars foundation

House built in Roadknight Street, by Ernie Ault, local builderBlack and white photograph of the residence of Rex and Mac Harbeck, seen in garden showing a cement sheet house with gable roof, unusual bay window across N E corner, white timber fence posts and rails with wire netting attached, established garden. Lakes Entrance Victoriahouses, accounting

Yields information the construction of the depot fan by the BTPS and the various stages of the work.Black and white print of the laying out of the rails that the between the end of the crossover and the level crossing - Bob Prentice Photograph, early Feb. 1973, prior to swapping the trams between tracks. Features Gavin Young, Loddington's and others. See BTPS Annual Report - 1972 - 73 list of dates.trams, tramways, depot construction, btps, trackwork

Negative and Digital images of the Wal Jack Bendigo Negative file of two trams at Charing Cross. Bendigo No. 22 is behind one of the ESCo trams, most likely Easter 1941 - see Reg Item 5757 for another Charing Cross photograph. Note the steps and barrier rails on the tram.trams, tramways, bendigo, easter fair, charing cross, esco, tram 22

Overhead Maintenance motor truck with hydraulic elevating and rotating platform on a 1952 Bedford Chassis. Engine no. KM 237540, with purpose built platform, lockers, cupboards and elevating platform, ladders, hand rails and a gong. Fitted with turn indicators and flashing lights by BTPS and vice. In MMTB cream paint.mmtb, overhead, support vehicle

Yields information about the installation of the wheel grinder in the Ballarat depot during the 1935/1936 rehabilitationSet of 5 Black and white photo prints from collected negatives of under floor wheel grinder at the SEC Ballarat depot building, during refurbishment by the SEC during the mid 1930's. 1353.1 - General arrangement of grinding wheels, jacks, moving rails, motor control, switch and wall mounted resistor grids. 1353.2 - Close up of the grinding wheels, jacks and moving rails. 1353.3 - view looking along the pit, showing the drive motors, belts and switches 1353.4 - view looking along the pit with the outside pit covers in place and rails in place. 1353.5 - similar to 1353.1 - but showing motors and drive belts, but not wall mounted equipment. See Reg Item 3806 for a photograph of the grinder in use. Copy 2 - of all above photos - large format prints (203H x 253W) - added 28/7/2007, ex Alan Bradley holding of prints, received 5/2007. See also Reg Item 3906 for a mounted set of these photographs. Negatives scanned at 3200dpi and images updated 14/5/2020.tramways, trams, wendouree parade, sec depot, rehabilitation, wheel grinder

Stawell Shire Hall in the process of being painted. The photo shows the painter up the ladder with a paint bucket. A bicycle is leaning against the decorative fence possible the painters bike.Coloured photograph of the Stawell Shire Hall being painted. A person in white overalls is standing on the top rails of the ladder painting the decorative window out the front. A taller ladder is positioned near the door and leaning against the parapet. The photo also shows the decorative fence, with a white post and white gate. Peterboro Cardboards The Canadian Board/Le Carton Canadian No. 337stawell

Black and White Photograph of the interior of W2 537 showing the detail of the interior woodwork, hand rails, seating, doors, lights etc. Photo c1960, 1970's reproduction the original print? Printed on Kodak Paper. 2nd copy added from donation of Geoff Warburton 7/10/17.Very faintly in pencil in top right hand corner "1975 Pre sale" 2nd copy = "587-interior-MTMB" in pencil on rear.trams, tramways, w2 class, interiors, mmtb, tram 537

Concrete bridge over North Arm, constructed by Coate Bros. opened September 1917. Also Maranui Guest House history.Black and white photograph of a tourist launch named Maranui 2 beside the North Arm Bridge. People on launch dressed in summer clothing of pre WW1 era. Posts and steel rope rails on bridge. Low tide indicated by height of bridge piers out of the water. Lakes Entrance Victoria boats and boating, bridges, clothing

Item in the collection relating to Edward Judd, refer Cat No 7410 for his service details.1.& 2. Chrome plated, moulded iron stirrup. It has the arch over the top and twin base 'rails' for under foot. On top of arch is a slot of 3.5 cm wide, this is for the belt. Leather belt and buckle for the stirrup. The belt is 2.5 cm wide and 5mm thick. The buckle is chrome plated iron.horse equipment, saddlery, stirrups

Date made May 2000.Colour photograph showing the removal of the road surface from the road approach and old concrete North Arm bridge prior to demolition of the bridge. Image shows the new bridge in background, earth moving machinery, and the North Arm waterway, and first rails of bridge removed by crane on bridge. Lakes Entrance Victoriabridges, waterways, machinery, demolition

Photocopy of a four page document, onto two A3 sheets, titled "Tramway Construction and Equipment", produced by Duncan and Fraser, c1887 as it notes Ballarat's horse tramways . Promotion document detailing Duncan and Fraser's premises, Adelaide, track, economics, horse tramcars, depots, horses, rails, sleepers and tram route.trams, tramways, horse trams, adelaide, duncan fraser, ballarat

Pamphlet - cut out from card with a hanging function or link for use on tramcar strap hanging rails, titled "Special Event Services", for the 2020 Grand Prix, produced by Yarra Trams and PTV. Information about extra tram service and contact numbers for queries. QR code for scanning for more information.trams, tramways, grand prix, yarra trams, pamphlets, events

Pamphlet, printed and cut for use in trams around passenger hanging rails, titled "Touch on to Win" featuring the front of an E class tram and on the rear the prizes that could be won for users with registered myki open route 96. List prizes on rear. Has the Yarra Trams and PTV logos, permit number.trams, tramways, yarra trams, myki, route 96

The three brick shops were part of the later commercial development which emerged along O'Shanassy Street. These shops were built on the northern side of Brook Street. Earlier commercial development was confined to the south side of Brook Street.A coloured photograph of a street scape in O'Shanassy Street showing three shop fronts. At the time the photograph was taken the shops were occupied by Kilkenny Real Estate Agent, Camera Action and Heron Electrics. There is a roof top patio area above the camera shop and two treated pine rails are along the nature strip.o'shanassy street, sunbury, kilkenny real estate, camera action, heron electrics, george evans collection

Yields information about the removal of the tram track and consequences of poor practices that led to the injury of a person.Photocopy of an article in The Courier, 10-2-1972, titled "Man Injured", regarding the injury of James Wood of Wendouree, when a rail partially slipped from the crane and trapping him during the removal of the rails at the intersection of Sturt and Lydiard St corner the previous day. Has a photo of the ambulance vehicle and people looking on..trams, tramways, closure, demolition, track removal, sturt st

One of a few service vehicles built from almost new by the MMTB rather than being a converted vehicle. Donated to the BTM in 1999 and has been an operational tram 2001.Single truck (4 wheels), special purpose tram fitted with two cabs, control equipment, air brakes, track scrubber or cleaning equipment, pump, water and air lines to clean track. Carries approx. 4 cubic metres of water. The tram was built by the Melbourne and Metropolitan Tramways Board in 1934 using the cabs from a C class tram (No. 32). It was transported to the isolated Footscray system a number of times to clean the rails there. In 1961 it received additional body bracing and repainted in the diagonal black and string (light cream) stripes. The tram became 8W during 1975 as the then new Z class trams came into service. By the early 1990's the need for the tram and the other similar cars used to "scrub" the surface of the rails was no longer. The tram was stored at Malvern depot for many years before being donated to the Ballarat Tramway Museum by the Public Transport Commission in September 1999. It has been scrubbing the rails in Ballarat since March 2001. For a detailed article see April 2008 issue of Fares Please. Photo Warren Doubleday 20/9/2008 after painting completed See Destination CityMMTBtrams, scrubber tram

Two red covered auction catalogues for an auction held at the Gold Mine, Clunes on 15 March, 1941. Sale comprised of Winches, boilers, pumps, wire ropes, piping, rails, poppet legs, cages, tanks, trucks and tools, etc. Contains descriptions of the larger machinery. J. H. Curnow & Son were the auctioneers.business, auctioneers, j h curnow & son pty ltd, ian dyett collection - auction catalogue - gold mines - clunes, clunes goldfields (1931) limited, j h curnow & son, j l jamieson, the cambridge press

Belaying pins can be metal but are often made of wood, treated or untreated, plain or with handles. A belaying pin is used to secure the running ropes of the rigging to the ship's rails using holes drilled onto the rails for that purpose. The belaying pins are inserted into holes in the ship’s rail, drilled for that purpose. When the sail has been raised, the ropes are wrapped around the upper and lower sections of the pins in a figure-eight pattern. The shapes of these belaying pins taper from the rounded end of the handle inwards towards the bottom, which allows them to have a firm fit into the holes in the rails. The rigging rope is wound around the pins in such a way that a tug on the pin's handle pulls it out of the hole and quickly frees the rope and the sail.These belaying pins are significant for their association with sailing vessels, particularly vessels of the late 19th and early 20th centuries.Belaying pin, metal, painted brown.flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, sailing equipment, nautical equipment, rigging, yards, sails, belaying pin, sailing ship

Belaying pins can be metal but are also made of wood, treated or untreated, plain or with handles. A belaying pin is used to secure the running ropes of the rigging to the ship's rails using holes drilled onto the rails for that purpose. The belaying pins are inserted into holes in the ship’s rail, drilled for that purpose. When the sail has been raised, the ropes are wrapped around the upper and lower sections of the pins in a figure-eight pattern. The shapes of these belaying pins taper from the rounded end of the handle inwards towards the bottom, which allows them to have a firm fit into the holes in the rails. The rigging rope is wound around the pins in such a way that a tug on the pin's handle pulls it out of the hole and quickly frees the rope and the sail.These belaying pins are significant for their association with sailing vessels, particularly vessels of the late 19th and early 20th centuries.Belaying Pin, metal, painted white.flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, sailing equipment, nautical equipment, rigging, yards, sails, belaying pin, sailing ship