Developed by Dr Jack Lippes in 1962, the Lippes Loop was commonly used as a contraceptive device from the 1960s to the 1980s. Due to its low cost and the ease of inserting and removing the device, it quickly became the most popular IUD in the world during its time. This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Lippes Loop IUD, Size B. IUD and inserter are sealed inside a sterile plastic pocket. Manufacturer information is printed on a cardboard insert which holds the IUD inside the pocket. The packaging of the IUD is printed with instructions for use on the back.intrauterine device

An identical device but with four prongs, was made by Goodell Co. for paring peaches.'Lightning' Arc apple parer with hand-cranked wooden handle, on a wooden base."Manuf'd by Goodell Co. Antrim. N.M. Pat. March 18 1884"apple corers, apple peelers

A wooden racquet with a concave throat, and bulbous handle butt. The throat on obverse features the decal inscription: PRINCESS. The throat on reverse features the decal logo, in gold, red and black, of a dog above a diamond device. Inscription within and below device: D & M/.../SPORTING GOODS/MADE IN/U.S.A. Inscription along left side of stem: MADE BY THE DRAPER-MAYNARD COMPANY/PLYMOUTH, N.H. Materials: Wood, Glue, Lacquer, Metal, Ink, Gut, String, Plastictennis

The blacksmith leg vise is also called the "solid box vise" and is one of the most important tools in the blacksmith's shop. It firmly holds hot iron while it is hammered, chiseled, or twisted. These are the only vises that are designed to take this kind of use day in and day out. A small 30-pound blacksmith's vise can survive pounding that would wreck a much heavier cast iron bench model. Three things make a blacksmith's vice special. One is that they are forgings, not cast iron or ductile iron. The second is the leg that provides support to the floor or from a sunken post. The last is the hinge, while not a perfect way to construct a vice the pin joint is durable and can take a considerable beating. If sheared it is easy to replace. These things all combine into a tool that can take decades of heavy use and abuse. Most in use is one to two hundred years old.Some of these vises were made by specialists such as Atwood of Stourbridge England, Steel City and Columbian in the U.S. and others were made in anvil manufacturing plants such as "Mousehole Forge" and "Peter Wright" in England and "Fisher-Norris" and others in North America. The design of these vises right down to the last chamfer seems to have been perfected in the 1600s and remained more or less the same until the 20th century. The bodies are forged wrought iron or mild steel and they have hard steel surfaces welded into the jaws. The jaws have little or very shallow serrations which are generally worn off.Around the turn of the 20th Century during the hey-day of the blacksmith shop in North America, these tools were considered so standard a commodity that they were sold without reference to the manufacturer. Very few were even marked with the maker's name. Size is best defined by weight as there is some variation in jaw size from manufacturer to manufacturer. They were sold by the pound and are still best judged by the pound.A vintage tool used in a Blacksmiths shop during the early 19th century to the beginning of the 20th century. Regarded as a significant into social history of the time.Leg Vice attached with screws to bench via a block of wood. Has large metal pole which practically reaches the floor. Also has a metal device to either tighten or slacken vice.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Black and white photograph, 1 man, photograph of Brian Grath (?) with a helmet on his head and a breathing device hanging around his neck. Bendigo Advertiser description on back of photo: Brian Grathrecreations, sports, awards

'Magic cream tube' - device for siphoning off the cream from bottled milk where the cream has risen to the top. Made in England ca. 1940. Original card with instructions for use. Patented.domestic equipment, food storage & preservation

Used for endometrial biopsy. This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Stainless steel curette. Consists of a small handle section with finger grip and a slender metal shaft, ending in a hollowed, squared point. Writing engraved on handle of device reads 'martin GERMANY STAINLESS'.'martin GERMANY STAINLESS'gynaecology

The helmet is round shape and dark green colour. The bottom edge are covered in a small black line. On one side of the helmet, there is a cummunication device attached that has one power cord and a communication cord.flight helmet, raaf

A device made up of a large loop of black elastic with seven steel strips. Designed to sit across the head pushing hair into series of waves held in place by loops of elastic under ears.costume accessories, hair accessories, personal effects-toilet requisites, hairdressing

Australian Active Service Medal 1945 - 1975 with clasp. The AASM 1945 - 75 was approved in 1997. it was awarded for service in, or in connection with, prescribed warlike operations from 3 September 1945 until 13 February 1975. Vietnam Medal. The Vietnam Medal was instituted in 1968 and awarded for service in Vietnam between 29 May 1964 and 27 January 1973. The Vietnam Medal was issued under the Imperial system but was mainly awarded to Australian and New Zealand personnel. Republic of Vietnam Campaign Medal with ribbon device '1960-'. This medal was issued by the Government of the Republic of Vietnam for service in the prescribed area of operations in Vietnam during the period from 31 July 1962 to 27 January 1973.Australian Active Service Medal 1945 - 1975 with clasp. The AASM 1945 - 75 was approved in 1997. it was awarded for service in, or in connection with, prescribed warlike operations from 3 September 1945 until 13 February 1975. Vietnam Medal. The Vietnam Medal was instituted in 1968 and awarded for service in Vietnam between 29 May 1964 and 27 January 1973. The Vietnam Medal was issued under the Imperial system but was mainly awarded to Australian and New Zealand personnel. Republic of Vietnam Campaign Medal with ribbon device '1960-'. This medal was issued by the Government of the Republic of Vietnam for service in the prescribed area of operations in Vietnam during the period from 31 July 1962 to 27 January 1973.replica medals, australian active service medal, vietnam medal, republic of vietnam campaign medal

A wooden racquet with a concave throat, and bulbous handle butt. The throat on obverse features the decal inscription: PRINCESS. The throat on reverse features the decal logo, in gold, red and black, of a dog above a diamond device. Inscription within and below device: D & M/.../SPORTING GOODS/MADE IN/U.S.A. Inscription along left side of stem: MADE BY THE DRAPER-MAYNARD COMPANY/PLYMOUTH, N.H. Materials: Wood, Glue, Lacquer, Metal, Ink, Gut, String, Plastic, Painttennis

A MacGregor Gold Crown tennis racquet, with string whipping around shoulders and shaft, hide shoulder reinforcements, fibreglass throat and shoulders, and leather handle grip with patterned perforations. MacGregor logo features on base of head. Model name, with gold crown device, features on throat. Gold crown device also features on black cloth butt cover. Materials: Wood, Enamel, Leather, Nylon, String, Ink, Glue, Lacquer, Metal, Cloth, Fibreglass, Adhesive tapetennis

A Snauwaert Orion tennis racquet, with string whipping around shoulders and shaft, diagonal nylon stringing, and leather handle grip with floral perforations. Model name features across base of head, flanked by starburst devices. Diagonal grid design features on throat. Snauwaert logo features along shaft, with 'S' trademark in globe device below. 'S&D' trademark features on butt cover. Materials: Wood, Nylon, Leather, Ink, Glue, Lacquer, Metal, String, Enamel, Adhesive tapetennis

This tool is used to clamp and hold pieces of timber together during the process of joining or compressing two pieces of timber together. The first block is stationary and attached to the end of the base while the second block moves with the turning of a long screw. It is used also in the process of bookbinding with a similar holding intent.An interesting object with a specific purpose which is still in working order.Wooden triangular shaped block which is divided in two pieces with one piece being moveable with the turning of a turned wooden screw device. It is quite heavy which would suggest that the timber is quite dense warrnambool, wood press, mitre press, book binding press,

Used by first Warrnambool Cheese and Butter Factory Company Ltd Field Officer, Bruce McLaren, for on-farm testing in the Allansford area to check the amount of suction in milking machines.Phillips Rurakura Vacuum Recorder in a wooden box with lid, metal hinges and fastening clip, screw adjustment and name plate on outside. Inside has a clockwork-operated recorder with pen device to roll of paper.Internal: Trade mark Empel E.M.P. Engineers Ltd PO Box 5125, Hamilton, NZ Aust. Pat. 209 510. NZ Pat. 112 486. External: Empel Phillips Ruakura Type Vacuum recorder, Makers E.M.R. Engineers Ltd. PO Box 5125, Hamilton NZ

Perspex display featuring sequential firing device for Claymores. The Box Mk2 with green plastic claymore case and photos of Lt. Moose Dunlop and Pte. Lyal Mitchell. An explanation of features and use are also included.claymore mine, lt. moose dunlop, private lyal mitchell

Gold bearing ore is pulverized by cast iron stampers (steam driven) and material then passes over a large copper plate covered in mercury causing the gold particles to combine with the mercury to form an amalgam which is scraped of and placed in a retort. The retort is heated causing the mercury to evaporate leaving the gold to be refined into ingots. The mercury is cooled as it leaves the retort and is reused. A second tray covered in what is called a blanket traps any fine gold that has passed the first plate. Finally the residue material goes over a vibrating table called a Wilfley Table which captures any iron pyrites which may contain about three percent gold. this is roasted and treated to recover any remaining gold at a special treatment plant.Wooden model of a five heads gold stamper battery. The gold stamper battery is a device for crushing ore. The parts of the battery are cams; dies; guides; kingposts; mortar box; shoes; stamps (or stampers); tappets. gold mining, mining equipment, gold stamper

Michel clips are small clips used to close surgical incisions. They are then removed when healing is complete. They are also sometimes used temporarily as part of a procedure to stop blood flow. This is one of a collection of items associated with Dr Felix Henry Meyer (1858-1937). Meyer was a very prominent early obstetrician and doctor, playing a part in the establishment of the role of the chair of obstetrics at the University of Melbourne in 1929. He was also a foundation member of the Royal Australian College of Surgeons.Metal tin containing two sets of applicators, which resemble tweezers. Tim also contains a thin wire device and a stand for holding these items in place inside the tin. Tin has a removable lid.surgery

Photographs and description of machines and devices used throughout history. Photographs and text by Damien Lewis.126 p., with text and colour photographs. Hard cover.antiques, history, australian history

The Schimmelbusch mask is an open breathing system for delivering an anesthetic. The device was invented by Curt Schimmelbusch in 1889, and was used until the 1950s (though it is still applied in some developing countries). The device consists of a wire frame which is covered with several beds of gauze and applied to the patient's face over the mouth and nose. Then high-volatility anesthetic (usually diethyl ether or halothane, and historically chloroform) is dripped on it, allowing the patient to inhale a mix of the evaporated anesthetic and air. The device is designed to prevent the anesthetic from coming in contact with the patient's skin, where it can cause irritation.This model differs from the others in that the mask's handle is attached to the mask, as opposed to the spring. The chloroform cloth was possibly held in place by the clamp, instead of a spring. Schimmelbusch anasthetic mask, made of Stainless steel. This mask was used with chloroform cloth. Missing spring. Martin and Co.surgery, anesthetic, chloroform, surgical instrument

Items were part of a film developing kit used by Jack Grinton who served as No 1043, 38th Batt AIF 1916-19. This was his second outfit. During his service he took hundreds of photos and developed many in England. Refer Cat No 1280 for service details. Refer 1248.2, 1317P, 1320P.Tools used in photo developing. .1 Device with wooden handle .2 Wooden handle with metal point .3 Silver coloured metal spool .4 Black metal spool .5 Small metal rodphotography, accessories

Audit of types of trams that were operated by the Ballarat Tramways System subsequent to horse drawn trams. Dated 14th February 1969. 16 B+W photo of various trams and a tram fare collection device.document, basil miller

When Hewitt introduced his regulating stopcock in 1887, attempts were made to dilute the nitrous oxide with air and so obviate the element of asphyxiation. The method was to be seen in London, mainly in dentistry and minor surgery, so late as 1930. It was not very successful. To give even 10% of oxygen (which is not enough) the gas-mixture must contain 55% of air and 45% of nitrous oxide. The latter is thus so diluted by atmospheric nitrogen as to be incapable of producing anaesthesia except by asphyxiation. "Gas-air" was confined to analgesia, for example in midwifery. (Source: Penn catalogue)Brown leather facemask attached to metal inhaler and stopcock device that has been sectioned to reveal its inner workings. The various exposed channels have been painted either green, red, blue or purple.Engraved into side of stopcock: HEWITT'S / N20-02 / 1895 / G. Kaye sect. 1952. •Stamped into other side of stopcock: [indecipherable] BARTH & CO. / SOLE MAKERS / 54. POLAND STREET LONDON.W.frederic hewitt, stopcock, nitrous oxide, oxygen, gas-air

Sent from Germany by Elfriede & Paul Faig.Tools belonging to W. Hermann / G. Kaltenbach - 1. Small metal handle|2. Drilling device, made of metal and possibly made on lathe (no. 7955).|3. Metal thread cutting tool (originally Australian).tatura, camp 3, faig, p, kaltenbach, g, hermann, w, trades, metalworking, handcrafts, woodturning

B & W photo of three men. David Jamieson Tom Treseder Roger Purcell, dressed in suits holding bibles, an electronic reader, and a smart electronic device at the launch of the Bible Society's "Smart Book" program.A detailed typewritten statement described the involvement iof David Jamieson Roger Purcell and Tom Treseder in the Bible Society project.bible society, smart book program, david jameison, tom treseder, roger purcell

Colour photograph of various vehicles in corrugated iron shedding at Narre Warren orchard. A barrel drum can be seen in the extreme left side of frame. The driveway heading to the sheds has a plough-like device resting.

Horace Darwin, youngest surviving son of Charles Darwin, was a founding partner of the Cambridge Scientific Instrument Company in 1881 (http://www.museumoftechnology.com/cic.html).Composite object with three feet supporting two squared cylinders attached to a clamping device and metal block with four current terminals. Cylinders are covered with red leather. Metal block and clamp base appear painted.Engraved on terminal block: 'No 15548 / THE CAMBRIDGE SCIENTIFIC INSTRUMENT CO LTD. CAMBRIDGE. ENGLAND' Engraved on side of terminal block: 'To be excited from 200 volts circuit / with coils in series. Connect terminals 2 & 3.'cambridge scientific instrument company, electro magnet, electrical equipment, electrical instrumentation

The Phonic Ear hearing aids were actually auditory trainers for children in school. This aid was also an FM receiver so the child could clearly hear the teachers' voice. This was used by the student to receive the teachers' transmissions. For more information see: http://www.hearingaidmuseum.com/gallery/Miscellaneous/Assistive%20Devices/Phonic%20Ear/info/phonicearfmsystem.htm Beige FM Receiver with red plug-in crystal module (colour coded for frequency) and two leads on either side for hearing aids. This would have been used by the student to receive the teachers transmissions. Masking tape on front, obscuring name, writing on tape faded. "MODEL/HC 421 R/STEREO/AUDITORY TRAINER/FM/CERTIFICATION/THIS RECEIVER COMPLIES/ WITH FCC RULES PART 15/OPERATION IS SUBJECT/TO THE CONDITION THAT/ THE DEVICE WILL NOT/CAUSE HARMFUL INTER-/FERENCE AND THAT THE/DEVICE MUST ACCEPT ANY/INTERFERENCE THAT/MAY BE RECEIVED, INCL-UDING INTERFERENCE/THAT MAY CAUSE UN-/DESIFED OPERATION./PHONIC EAR/MODEL HC 421 R/TYPE GODKENOT/ deaf children australia, hearing aid, auditory training device, phonic ear

What device converts AC to DC? rectifier A rectifier is an electrical device that converts alternating current (AC), which periodically reverses direction, to direct current (DC), which flows in only one direction. The process is known as rectification, since it "straightens" the direction of current. The unit was used at Ballarat School of Mines in the Maths, Science and Physics Departments.Grey metal unit with Dials on the front and vents at the back. Handle for carrying. Two switches for turning on and off. Yellow sticker - SMB - with number 116071. Engraved on back - S.M.B.. Maths / Science / Physics Sticker on cord indicating inspection of unit - 13/04/2005. Tag Number - 032735alternating current, direct current, ac, dc, rectifier, electrical, ballarat school of mines, science, maths, physics