A passport of Legatee George Knocks from 1928. George Knocks was born in the UK and joined the Royal Navy in World War 1. He later migrated to Australia and joined Legacy in 1929 until his death in 1945, he left a significant bequest to Melbourne Legacy which was used to help many people. Information from a press release in 1975 relates the story of George Knocks who joined Legacy and left a bequest that made a difference. The information was intended to be used by press and magazines etc. A longer version of the story is in the Weekly Bulletin - 29 Sept 1964 and a document prepared by Legatee Armstrong in 1965 called One Man's Legacy. Summary: George was described as a lonely ex-seaman who migrated to Australia after the first world war. He learnt about Legacy and the work with widows and children. 'He joined up as a Legatee and from that day, the pattern of life changed greatly for George. He became absorbed in his new environment and spent most of his time with the children. The mothers founding him a rugged, but completely trustworthy friend.' When George died on 14 April 1945 he was mourned by many Legacy friends. His left his property to four comrades, as trustees to use in continuing Legacy's work, this bequest became the George Knocks Fund. As a result, a great many people in Legacy's care were helped, in all sorts of ways.A record of the life of a legatee and an example of what passports contained in the 1920s.Black hardcover passport of George Knocks issued 1928.Cover stamped in black ink 'A73884' and signed in black ink 'G. Knocks', pages notes in pen and pencil, stamp from Colombo, Sri Lanka and Freemantle WA, in purple ink.george knocks, fund, bequests

A photo of Legatee George Knocks from his time in the Royal Navy. George Knocks was born in the UK and joined the Royal Navy in World War 1. He later migrated to Australia and joined Legacy in 1929 until his death in 1945, he left a significant bequest to Melbourne Legacy which was used to help many people. Information from a press release in 1975 relates the story of George Knocks who joined Legacy and left a bequest that made a difference. The information was intended to be used by press and magazines etc. A longer version of the story is in the Weekly Bulletin - 29 Sept 1964 and a document prepared by Legatee Armstrong in 1965 called One Man's Legacy. Summary: George was described as a lonely ex-seaman who migrated to Australia after the first world war. He learnt about Legacy and the work with widows and children. 'He joined up as a Legatee and from that day, the pattern of life changed greatly for George. He became absorbed in his new environment and spent most of his time with the children. The mothers found in him a rugged, but completely trustworthy friend.' When George died on 14 April 1945 he was mourned by many Legacy friends. His left his property to four comrades, as trustees to use in continuing Legacy's work, this bequest became the George Knocks Fund. As a result, a great many people in Legacy's care were helped, in all sorts of ways.A record of the life of a legatee.Sepia portrait of George Knocks in Royal Navy uniform plus an envelope initialled by Legatee Brian Armstrong.Reverse of photo is printed as postcard and has handwritten 'Legatee George Knocks' in blue pen and '4/4/46' and '5193' in pencil. Envelope has handwritten 'Legatee George Knocks / On Active Service 1914-1918' in blue pen and initialled 'JHBA' which is Legatee Brian Armstrong.george knocks, fund, bequests

A photo of Legatee George Knocks from his time in the Royal Navy. George Knocks was born in the UK and joined the Royal Navy in World War 1. He later migrated to Australia and joined Legacy in 1929 until his death in 1945, he left a significant bequest to Melbourne Legacy which was used to help many people. Information from a press release in 1975 relates the story of George Knocks who joined Legacy and left a bequest that made a difference. The information was intended to be used by press and magazines etc. A longer version of the story is in the Weekly Bulletin - 29 Sept 1964 and this document prepared by Legatee Armstrong in 1965 called One Man's Legacy. Summary: George was described as a lonely ex-seaman who migrated to Australia after the first world war. He learnt about Legacy and the work with widows and children. 'He joined up as a Legatee and from that day, the pattern of life changed greatly for George. He became absorbed in his new environment and spent most of his time with the children. The mothers founding him a rugged, but completely trustworthy friend.' When George died on 14 April 1945 he was mourned by many Legacy friends. His left his property to four comrades, as trustees to use in continuing Legacy's work, this bequest became the George Knocks Fund. As a result, a great many people in Legacy's care were helped, in all sorts of ways.A record of the life of a legatee.White foolscap paper x 6 pages with black type of the story of George Knocks Fund, stapled together and edge bound with green tape, dated 30 June 1965.Handwritten on cover 'Box 3' in blue pen, 'B4 George Knocks Fund' in red pen and '1945' in pencil. Final page is signed 'JHB Armstrong' in blue ink.george knocks, fund, bequests

This academic bonnet belonged to Dr Mary Burnell. Mary Taylor Burnell was born on 21 February 1907, in Norwood, South Australia. She graduated with her MBBS in 1931. In 1932, Burnell served as a resident medical officer at Adelaide Children’s Hospital. By 1934 she was their Honorary Anaesthetist. It was also during this period that Burnell became the first female member of the Australian Society of Anaesthetists. One year later, in 1935, she worked as Secretary for the South Australian Section of the Society. Although resigning from her position at the Children’s Hospital in 1937, Burnell returned in 1942. The outbreak of World War II meant hospital staff and resources were drained. During her work, Burnell lobbied for a Department of Anaesthetics in the Children’s Hospital. Through working at both hospitals, she became aware of the great differences between administering anaesthesia to children and administering it to adults. In 1953 she was elected President of the Australian Society of Anaesthetists. She was the first female to be elected to this position. Two years later in 1955, Burnell was elected as a member of the Board of Faculty of Anaesthetists, Royal Australasian College of Surgeons. In 1966 she was elected Dean of the Faculty of Anaesthetists. Again, she was the first female to be elected to this position. Burnell worked tirelessly to promote the importance of anaesthetics in Australia. Burnell’s contributions to anaesthetics were recognised with Honorary Fellowships to both the Australian Faculty of Anaesthetists and Royal College of Surgeons. Navy blue velvet cloth bonnet with stiffened brim covered in same fabric as bonnet. Around the hat is tied a gold cord with tassels.burnell, mary, academic bonnet, australian society of anaesthetists, faculty of anaesthetists, royal australasian college of surgeons, royal college of surgeons, fellowship

Joyce Snow was born in Avenel and came to Beechworth at the age of twenty-three. She grew up at Bundarta, a place just out of Shepparton. Her father was a soldier who was part of the 37th Battallion while her mother's family were some of the pioneers of Beechworth--the Duracks. She finished school at about thirteen years old, did a correspondence course, and when she was old enough, she went training for nursing. Joyce was a trained nurse at the old Mooroopna Base, Hospital. She working at a Hospital in Shepparton when Manpower sent her to Beechworth. She arrived at Beechworth in 1943 at a train in Wangaratta. She had been a nurse in Beechworth for more than seven years. She got married in Beechworth and had three children, two girls and one boy. By the time of her third child, she studied a one year supplementary course on Psychy at May Day. Joyce had nursed prisoners of the First World War. She shared about the differences of medical practice back then in comparison to now. This oral history recording was part of a project conducted by Jennifer Williams in the year 2000 to capture the everyday life and struggles in Beechworth during the twentieth century. This project involved recording seventy oral histories on cassette tapes of local Beechworth residents which were then published in a book titled: Listen to what they say: voices of twentieth century Beechworth. These cassette tapes were digitised in July 2021 with funds made available by the Friends of the Burke.Joyce Snow's account of her life in the early 20th century is historically and socially significant to the cultural heritage of the region. She gave information about the settlements and life of the prisoners of First World War, the early forms of entertainment, education system and societal roles. She also mentioned changes in employment and migrant communities. This oral history account is socially and historically significant as these accounts provide a unique insight into the day-to-day life of the town's residents during the 20th century, many of which will have now been lost if they had not been preserved.This is a digital copy of a recording that was originally captured on a cassette tape. The cassette tape is black with a horizontal white strip and is currently stored in a clear flat plastic rectangular container. It holds up 40 minutes of recordings on each side.Joyce Snowburke museum, beechworth, hospital, oral history, nursing, nurse, first world war, prisoners of war, tatatura, moonrapna, peritontitis, doctors, tuck shops, largactil, rock films, victoria park, kings in grass castle, durack, duracks, glory box, d'oylies

The Bowler hat, characterised by its dome-like crown, was invented in 1849 by a pair of hat-makers: brothers Thomas and William Bowler. They were commissioned by the famous London hat retailer “Lock & Co” to invent a close-fitting, low-crowned hat for their customer Mr. Edward Coke. It would be sturdy and not easily knocked or blown off the wearer’s head. The difference between a Bowler hat and a Derby hat is simply that Bowler hats are British, Derby hats are American. The Bowler / Derby hat was devised in London during a time when the top hat was the upper-class men’s hat of choice and the lower social class wore soft, cloth caps. However, the top hat was impractical and inconvenient for those on horseback as it easily toppled over and was easily damaged. Bowler hats were termed “stiff” hats– they were given a coat of shellac in the construction process and therefore never conformed to the shape of the wearers head. While very stiff, the hat is lined in a beautiful, soft silk to ensure comfort. The Bowler hat marked the first middle ground between formality and casual wear. c1900 The Derby hats were very popular for all classes in USA including criminals like Butch Cassidy & Sundance Kid and c1920 many fashionable women also wore them. In England and Commonwealth the Bowler hat remained popular throughout the 1800s and through the first half of the 1900s, being worn by everyone from politicians, actors, accountants, bankers, and the 'everyman' on the street.The family of Nance Blackman were early settlers in Moorabbin ShireA black felt Bowler hat with cream silk lining and black ribbon bandInside Crown & Band ; The Cobweb Felt / easiest/ fitting / extra light / Inside Band Best Quality / 6111hats, hatters, blackman nance, clothing, suits, fashion wear, bankers, actors, politicians, bowler hats, derby hats, top hats, social classes, moorabbin, cheltenham, bentleigh, brighton, market gardeners, pioneers, early settlers, bowler thomas, bowler william, lock & co. ltd. london, england, america, canada

The Feuerhand lantern works were established in Beierfeld in the Saxon Ore Mountains. Called Erzgebirge in German or Krušné hory in Czech, is a mountain range in the south of Saxony in Germany known for its craftwork. Lantern production began in the area by Hermann Nier who ran a plumber's workshop around the 1870s and made lanterns, amongst other things. In the town of Beierfeld, also well-known for its metalworking were the brothers Hermann and Ernst Nier who founded a modern production centre for hurricane lanterns manufacture in 1893. Five years after the foundation, the company Frankonia (Albert Frank metalware) bought up the production site and the brothers Nier became production managers. Owing to differences with Frankonia, Hermann Nier finally started its hurricane lantern factory "Hermann Nier Feuerhandwerk" in 1902. In the same year, he applied for a patent for the manufacturing of lanterns using the stamping and folding techniques with tinning by hot-dipping and without hand-soldering. In 1914 the trademark "Feuerhand" was registered for all products as a utility model of the German Reich in German: "Deutsches Reichs-Gebrauchsmuster" (DRGM) and in 1920 the round Feuerhand emblem was added to the brand. Finally, in 1926 the patents, as well as the trademark "Firehand", were also registered in the USA. The manufacture of the well-known small hurricane lanterns the “Baby Series” complete with fireproof borosilicate glass from the Firma Schott firm from Jena started in 1933. Between 1918 and 1938 Nier Feuerhand became the biggest producer of hurricane lanterns in the world. Production continued until 1990.A significant item that demonstrates from its fabrication a manufacturing process that was far in advance of its time and that influenced the production of lanterns from many other manufactures around the world. These types of lanterns made by Feuerhand around the early 20th century are now sought after by collectors.Monarch style Lantern painted black. Made in Germany has Freuerhand, manufactures logo on filler cap and top of lamp centre postflagstaff hill, warrnambool, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, hurricane lantern, kerosene lamp, feuerhand lantern works, albert frank metalware, hermann and ernst nier

The Feuerhand lantern works were established in Beierfeld in the Saxon Ore Mountains. Called Erzgebirge in German or Krušné hory in Czech, is a mountain range in the south of Saxony in Germany known for its craftwork. Lantern production began in the area by Hermann Nier who ran a plumber's workshop around the 1870s and made lanterns, amongst other things. In the town of Beierfeld, also well-known for its metalworking were the brothers Hermann and Ernst Nier who founded a modern production centre for hurricane lanterns manufacture in 1893. Five years after the foundation, the company Frankonia (Albert Frank metalware) bought up the production site and the brothers Nier became production managers. Owing to differences with Frankonia, Hermann Nier finally started its hurricane lantern factory "Hermann Nier Feuerhandwerk" in 1902. In the same year, he applied for a patent for the manufacturing of lanterns using the stamping and folding techniques with tinning by hot-dipping and without hand-soldering. In 1914 the trademark "Feuerhand" was registered for all products as a utility model of the German Reich in German: "Deutsches Reichs-Gebrauchsmuster" (DRGM) and in 1920 the round Feuerhand emblem was added to the brand. Finally, in 1926 the patents, as well as the trademark "Firehand", were also registered in the USA. The manufacture of the well-known small hurricane lanterns the “Baby Series” complete with fireproof borosilicate glass from the Firma Schott firm from Jena started in 1933. Between 1918 and 1938 Nier Feuerhand became the biggest producer of hurricane lanterns in the world. Production continued until 1990.A significant item that demonstrates from its fabrication a manufacturing process that was far in advance of its time and that influenced the production of lanterns from many other manufactures around the world. These types of lanterns made by Feuerhand around the early 20th century are now sought after by collectors.Small round lantern replacement glass called "Feuerhand" Superbaby Model. Design No 58162.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, hurricane lamp glass replacement, glass, hurricane lamp, feuerhand lantern, jena glass works

The Feuerhand lantern works were established in Beierfeld in the Saxon Ore Mountains. Called Erzgebirge in German or Krušné hory in Czech, is a mountain range in the south of Saxony in Germany known for its craftwork. Lantern production began in the area by Hermann Nier who ran a plumber's workshop around the 1870s and made lanterns, amongst other things. In the town of Beierfeld, also well-known for its metalworking were the brothers Hermann and Ernst Nier who founded a modern production centre for hurricane lanterns manufacture in 1893. Five years after the foundation, the company Frankonia (Albert Frank metalware) bought up the production site and the brothers Nier became production managers. Owing to differences with Frankonia, Hermann Nier finally started its hurricane lantern factory "Hermann Nier Feuerhandwerk" in 1902. In the same year, he applied for a patent for the manufacturing of lanterns using the stamping and folding techniques with tinning by hot-dipping and without hand-soldering. In 1914 the trademark "Feuerhand" was registered for all products as a utility model of the German Reich in German: "Deutsches Reichs-Gebrauchsmuster" (DRGM) and in 1920 the round Feuerhand emblem was added to the brand. Finally, in 1926 the patents, as well as the trademark "Firehand", were also registered in the USA. The manufacture of the well-known small hurricane lanterns the “Baby Series” complete with fireproof borosilicate glass from the Firma Schott firm from Jena started in 1933. Between 1918 and 1938 Nier Feuerhand became the biggest producer of hurricane lanterns in the world. Production continued until 1990.A significant item that demonstrates from its fabrication a manufacturing process that was far in advance of its time and that influenced the production of lanterns from many other manufactures around the world. These types of lanterns made by Feuerhand around the early 20th century are now sought after by collectors.Small round lantern replacement glass called "Feuerhand" Superbaby Model. Design No 58162.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, hurricane lamp glass replacement, glass, hurricane lamp, feuerhand lantern, jena glass works

2NBH - Excursion Car NBH SECOND-CLASS EXCURSION CAR. The H was recognising their use for "Holiday" traffic. 15 of these cars were built in 1919 and numbered 1-15. Two more were built in 1981, and numbered 16 & 17. Two extended versions for wheelchair passengers were built in 1981 & 1983. These were numbered 51 & 52 - a separate number series due to the different type of vehicle. Six, numbered 18-23, were built in 1997-98. These had steel frames, padded seats, and a wide "window sill". At first glance they look the same as the previous NBHs. There are other minor construction differences due to the use of steel framing. 18NBH entered traffic 19/4/1997; 19NBH on 5/12/1997; 20NBH on 19/12/1997, the others added in 1998. VR Service History : 14/ 5/1900 NWS Built new as 33 NQR converted & renumbered to 12/ 4/1919 - To NBH 2 VR Service History NQR 33.VA - 14/ 5/1900 NWS Built new - 12/ 4/1919 - To NBH 2.VA - *NBH 2.VA - / 4/1929 - Modified Malco BO circa 1955 - Condemned Puffing Billy Service History or Notes 12 Apr 1919 - Nos 1 to 6 NBH (new) delivered to UPPER FERN TREE GULLY after this date. Mar 2013 - In for a hot box againHistoric - Victorian Railways Narrow Gauge - Passenger Rolling Stock: Excursion Car Passenger Carriage - Excursion Car made of steel and timber2NBH puffing billy railway, pbr, rolling stock , 2nbh, victorian railways narrow gauge - passenger rolling stock,, victorian railways, nbh - excursion car, 2nbh

15NBH - Excursion Car Body built by Puffing Billy Preservation Society 1976. NBH - SECOND CLASS EXCURSION CAR. The H was recognising their use for "Holiday" traffic. Originally 15 of these cars were built in 1919 and numbered 1-15. Four were broken up prior to 1962, and replaced with new vehicles in 1975-76. Two more were built in 1981, and numbered 16 & 17. Two extended versions for wheelchair passengers were built in 1981 & 1983. These were numbered 51 & 52 - a separate number series due to the different type of vehicle. Six, numbered 18-23, were built in 1997-98. These had steel frames, padded seats, and a wide "window sill". At first glance they look the same as the previous NBHs. There are other minor construction differences due to the use of steel framing. 18NBH entered traffic 19/4/1997; 19NBH on 5/12/1997; 20NBH on 19/12/1997, the others added in 1998. VR Service History 8/12/1919 NWS Built new *NBH 15.VA - 8/12/1919 NWS Built new - / 3/1928 - Modified AC Malco BO circa 1955 - Condemned - 1/ 7/1962 - Scrapped. Replica body built by Puffing Billy Preservation Society 1976. Puffing Billy Service History or Notes 8 Dec 1919 - Nos 7 to 15 NBH (new) delivered to UPPER FERN TREE GULLY after this date.Historic - Victorian Railways Narrow Gauge - Passenger Rolling Stock: Excursion Car 15 NBH - Passenger Carriage - Excursion Car made of steel and timber15NBHvictorian railways, puffing billy railway

This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum in Sydney and the National Museum of Victoria (known as Museums Victoria since 1983), as well as individuals such as amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century. The Regent Parrot has two separate populations separated by the Nullarbor Plain: one in the Mallee regions of eastern Australia, and the other in the Wheatbelt region of southern Western Australia. Though the populations are widely separated, the birds of each region do not appear especially different, one being a little duller than the other. There are, however, other differences between the two populations, especially in how they have fared: eastern populations are endangered, while the western population is thought to be increasing. The Regent Parrot eats seeds of grasses and plants and cereal crops, especially wheat. It also eats buds and flowers, insect larvae, psyllids and lerps. It forages in pairs or small parties, usually on the ground, but also in the canopy of trees or in spilled grain on the ground. The Regent parrot is endangered in NSW and Vulnerable in VIC This Particular specimen has been mounted correctly.This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century.A slim parrot with a long, dusky tapering tail and back-swept wings. It is mostly yellow, with blue-black wings and tail. There is a prominent yellow shoulder patch and red patches in the wings. The bill is deep pink. It is mounted on a thin wooden branch that is attached to a wooden mount with the scientific name located Label: T.L. 430MM / W.S. 540MM / WT. 200GMS / SEX [female symbol] Mount: Polytelis / Anthopeplus / Regent Parrot taxidermy mount, regent parrot, taxidermy, animalia, burke museum, bird, parrot

This copper nail, sometimes known as a ‘Dumpy Bolt’ or spike, was salvaged from the hull of the wreck of the “George III”. It dates back to at least 1810. It was found by an abalone diver on the south east coast of Tasmania. The nail would have been used to hold the layers of the ship’s keel frame and the planking together. The nail has been passed from the abalone diver to an interested business man on a trip to the south of Hobart, on again to the business man’s close friend who then donated it to Flagstaff Hill Maritime Village. The metal of nails such as this one, after being in the sea for a long time, become affected by the natural reaction of the sea water, causing it to degenerate and thin, and the stress from the force of the sea over the years alters its shape. Iron nails had been used on ships previously, but they quickly corroded in the salt; ships needed regular, costly and time-consuming maintenance to replace the iron nails. Towards the end of the 18th century the British Navy trialled the use of copper nails, finding them to be very successful. Merchant ships began to adopt this process in the early 19th century, although it made ship building very expensive and was more often used for ships such as the “George III” that sailed on long voyages. The three masted sailing ship “George III” was a convict transport ship built in Deptford, England, in 1810. On 14th December 1834 she left Woolwich, England, bound for Hobart Town, Van Diemen’s Land (Tasmania), under Captain William Hall Moxey. She was carrying 220 male convicts plus crew, guards and their families, totalling 294 persons (another 2 were during the voyage). Amongst the cargo were military stores including several copper drums of gun powder. On 27th January 1835 the “George III” was near the Equator, about half way into her journey. A fire broke out and the gun powder was in danger of explosion, threatening the whole ship. Two convicts braved the heat and smoke, entered the store and seized the gun powder drums, suffering burns for their efforts but saving a probable disaster. The fire destroyed some of the provisions and food was scarce. Many became ill with scurvy and some died during the journey. Nearing the end of their journey on 10th April 1835 the “George III” was headed through the D'Entrecasteaux Channel, south east Tasmania, between the mainland and Bruny Island. She was sailing in the moonlit night to hasten her arrival in port due to the great number of sick on board. She struck uncharted rocks, known only to the local whalers, between Actaeon Reef and Southport Lagoon and within hours began to break up. The ship’s boats were used to first rescue the women and children. Firearms were used to help quell the panic of the convicts below decks and some were killed by the shots. Many convicts, including the sick, were drowned. In all, 133 lives were lost including 5 of the crew, guards and their families. It was the third worst shipping disaster in Tasmanian waters. A monument in honour of the prisoners who perished in the “George III” has been erected, noting the date of the wreck as “Friday 10th April 1835.” (NOTE: there are a few differences between sources regarding dates of the shipwreck, some saying March and others April 1835. There are also differences in the figures of those on board and the number of lives lost.) The copper nail is significant as an example of sailing ship construction; fasteners used in the early 19th century on ships carrying convicts to Australia. The nail is also significant for its association with the ship “George III”. The “George III” is registered on the Australian National Shipwreck Database, ID 7195 as an Historic Shipwreck. She is the third worst shipwreck in Tasmanian waters. She is also associated with Early Australian History and the transportation of convicts to Australia. The incident of the fire on board and the bravery of the convicts in making the gun powder safe is an example of the social character of the people in early Tasmanian colonisation. Copper nail (also called a Dumpy bolt or spike) from the convict ship George III, wrecked in 1835. Nail is long, bent in an ‘L’ shape about 3/5ths along, tapering from both ends to the bend. Both ends are flat and do not taper to a point, nor have a thread. The shorter end has been polished, showing bright copper. There is pitting along the nail and virdigris is evident on the longer, unpolished end. The nail is displayed with the longer section resting on a wooden board between two ‘U’ shaped uprights, the shorter section upright. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, george iii, ship construction, ship nail, 1835 shipwreck, 19th century shipwreck, william moxey, d'entrecasteaux channel, convict transportation, copper nail, dumpy bolt, spike, keel nail

Yields information about the dimensions and equiipment on Ballarat Tramcars operated by the SEC.Typed List of tramcars and their details for Ballarat dated 5-August-1964, titled "Numbers and Particulars of Trams". Prepared by Les Denmead, typed by PB. Ballarat - typed carbon copy - two sheets, are taped together. Gives details of where purchased from , date of purchase, type, body builder, seating capacity, overall length, overall height, overall width, condition of tram, trolley base, Lightning arrester, controller make and type, Truck Maker and type, type of truck, axle type, wheel base, axle diameter, motors type and maker, Motor horsepower, Armature bearings, suspension bearings, gear teeth, Air compressor make and type, Brake Valves make and type, Governor make and type, Weight in tons and details of advertising space in racks. At base has typed (original) list of trams of the two types, single truckers and bogie trams. List of trams includes the scrubber and No. 20 which was scrapped prior to system closure. See also 8721 and 8722 for other versions - different dates and 8690 for a Bendigo list. Note: Framed copies of both Ballarat and Bendigo are held in the depot. Some changes have been made to the tramcars since the preparation of this sheet and there are some errors and differences. See also Reg Item 6879 for an annotated version.In black ink, top right hand corner - "Ballarat Tramway Preservation Society Cat No. 613"tramcars, ballarat, equipment, lists, data

The fire hose reel was purchased by the Fire Ladies' Auxiliary for the Mt Beauty S.E.C. Fire Brigade in the late 1950's for over 1000 pounds. Initially they competed with Bogong fire brigade as both were 'Industry' Fire brigades - both owned by the State Electricity Commission. Competition was at 2 levels - north east Victoria and state competitions involving rural and urban brigades with a difference in the equipment. Mt Beauty was/is an urban brigade whereas Tawonga is a rural brigade. Competition involved members to improve their skill, keep fit and was a very social occasion. After the Shire took over Mt Beauty township in 1961, the Fire Brigade ran by itself but soon became affiliated with the C.F.A. because of insurance and legal liability e.g.. enabling them to stop traffic or wreck buildings if required. The CFA were not happy with the Mt Beauty truck so a new one was obtained while the old one went to Bogong. Competitions gradually ceased as it was a young man's sport and young members had prior commitments. The reel was donated to the KVHS in the mid 1980's as it failed to be sold as it competed with new, cheaper, aluminium reels. The practice strip was located beside the fire station in Lakeside Avenue. This fire hose reel was used by the Mt Beauty Fire Brigade for demonstrations at competitions during the 1950's and 1960's. The Mt Beauty Fire Brigade Team won the competition in 1966 at Wangaratta. The score was close against the home team and was decided on a play off. The team benefitted by the man who wound the hose on allowing it to end up at the easiest height to handle when full of water and very heavy.The Mt Beauty Fire Brigade was an 'industry' fire brigade belonging to the State Electricity Commission of Victoria from the 1940's. It became a member of the Country Fire Authority in the early 1960's. During the 1950's and early 1960's members would compete with other local fire brigades in competitions against other brigades in the north east of Victoria using skills such as unwinding the hose off the reel and turning on the water in record time. The Mt Beauty Fire Brigade continues today as an urban fire brigade affiliated with the CFA.Varnished wooden cart reinforced by painted red steel frame. The wheels have 14 wooden spokes and steel around the outside of the wooden wheel. A long canvas hose is wound around a central winding cylinder. The cart has a wooden handle with a rubber jockey wheel at its end. There is a brass hose nozzle attached by a stainless steel frame on the outer side near one of the wheels.Each Reel: "Mt Beauty F.B." yellow print outlined in black with red background.fire hose. mt beauty fire brigade. country fire authority. fire reel.

Jane Shillinglaw was born 14 Jun 1846. She had a a son, Joseph Shillinglaw in 1863 and a daughter Jane Davidson in 1870 prior to her marriage to William James Sommerville in 1887. Jane's younger sister Catherine Shillinglaw was born 13 Nov 1852 at Coburg, Victoria. She married Edward Henry Bottle in 1897 This photo shows fashion and hairstyles typical of the later 1870s. Photographer Stewart & Co operated from various addresses in Bourke Street East Melbourne from 1874 through 1905. The photo is estimated to have been taken c.1878 which would make Jane 32 years of age and Catherine 26 years. There is another photo of who is believed to be Catherine Shillinglaw with Edward Henry Bottle. There are visual differences with the eyes so it is presumed this photo is of Jane. A duplicate photo is contained in Album 2 (05664) Stewart & Co operated from 217 Bourke St., East from 1871 to 1876 and from 217-219 from 1877 to 1889. Other locations included 42, 284 and 286. Overall, they operated in Melbourne from 1871 through at least 1910 though Carte-de-Visite photos were superseded by 1890. CARTE-DE-VISITE (cdv) 1857-1890 Cartes-de-visite (cdv's) are the most common form of photograph from the nineteenth century, generally measuring two and a half inches by four and an eighth inches (6.3 x 10.5 cm) when mounted, sepia toned, mounted on a card which was generally printed with the photographer's name and address on the back or beneath the portrait. - Frost, Lenore; Dating Family Photos 1850-1920; Valiant Press Pty. Ltd., Berwick, Victoria 1991marg ball collection, shillinglaw family photo album 1, 1871-1890, 1878, jane shillinglaw (1846-1893), jane sommerville (nee shillinglaw 1846-1893), shillinglaw family photo album 2, stewart & co photographers melbourne, unknown

An oar is an implement used for water-borne propulsion. Oars have a flat blade at one end. Rowers grasp the oar at the other end. The difference between oars and paddles is that oars are used exclusively for rowing. In rowing the oar is connected to the vessel by means of a pivot point for the oar, either an oarlock, or a hole. The oar is placed in the pivot point with a short portion inside the vessel, and a much larger portion outside. The rower pulls on the short end of the oar, while the long end is in the water. By contrast, paddles, are held in both hands by the paddler, and are not attached to the vessel. Rowers generally face the stern of the vessel, reach towards the stern, and insert the blade of their oar in the water. As they lean back, towards the vessel's bow, the blade of their oars pivots in the oarlock, and the end in the water moves towards the stern, providing forward thrust. There also is another way of propelling a small craft it's called a sculling oar which is attached to the transom and used to propel a small vessels rather than using two oars as previously described. It is believed the subject item is just such an oar given it’s long blade associated with a sculling oar. For thousands of years vessels were powered either by sails, or by the mechanical work of rowers, or by paddlers. Some ancient vessels were propelled by both oars and sail, depending on the speed and direction of the wind. Wooden oars, with canoe-shaped pottery, dating from 5000–4500 BC have been discovered in a Hemudu culture site at Yuyao, Zhejiang, in modern China. The history of man using wooden oars to propel a boat has a considerable record in marine archaeology going back many centuries. The item is significant for marine archaeology as it gives a snapshot into how a small row boat was powered using a wooden sculling oar. A method of propelling a small boat still used today an example is the gondoliers in Venice using a sculling oar in a circular motion to propel his craft. Single sculling oar with long flat blade, two copper bands, on blade with rowlock fittingNoneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, boat oar, sculling oar, row boat

Hilda Charlotte Foster, 1902 - 1990, was a Double Certified Nurse when, at the age of 35, she successfully applied to the board of the Australian Inland Mission (AIM) to work at an outback field centre in South Australia. Born and raised in suburban Melbourne, she had been inspired by stories told to her by other missionaries about the fulfilment to be gained working amongst Aboriginal communities. Given her religious faith and nursing skills, she believed she could make a difference. She worked in Oodnadatta in South Australia for two years (1937-1939), followed by a stint in Innamincka in New South Wales in 1940 -1942. Before she became a nurse, Hilda Foster trained to be a Sunday School teacher and was a member of the Sunday School Council of Victoria. She completed first aid courses run through the Presbyterian Deaconesses Institute in Carlton, Victoria, and in 1930 successfully applied to become a trainee nurse at the Austin Hospital for Incurables, in Heidelberg. She commenced her training there in 1931, before moving to the Women's Hospital in 1933. In 1934 she had six months at the Fairfield Infectious Diseases Hospital, before returning to the Austin, where she was employed when she sat her final exams in November 1934. Her combined skills made her a most attractive option for the Australian Inland Mission. As well as being multi-skilled as a nurse, she provided religious instruction and spiritual ministry to members of the community. https://trove.nla.gov.au/people/762093?c=people Sister Foster nursed at Toora Bush Hospital prior to leaving for the Paton Memorial Hospital, Vila, New Hebrides in 1944. She left the New Hebrides in 1946.Matt, black and white, head and shoulders, studio portrait of Sister Hilda Charlotte Foster on card.australian inland mission, presbyterian deaconess, sister hilda charlotte foster, paton memorial hospital vila new hebrides

Dr Lisa ANDERSON (1958- ) Dr Anderson’s research questions environmental issues that impact on the social structures of communities and their mapped or metaphysical borders. She develops projects around ways of understanding the effects of climate change. These include work with folklore, legends and religions that tell stories of coping with weather, forced migration of animals and people and coping with difference. She has undertaken international residency programs and exhibitions in the Arctic, Iceland, Paris, Norway, London and China, and she was the first Artist in Residence at the Australian Museum. These unique opportunities continue an extensive art practice of installation work, video, photography and sculpture. Anderson has an extensive record of exhibitions in Australia and overseas with work included in both private and corporate collections. Her exhibitions include Journeys: Due North, a large installation work that includes work created over a 10-year period of engagement in expedition and science work North of the Arctic Circle. Beneath the Beauty of Architecture, an exhibition at her London Gallery, Bicha, used images created in China, Nunuvut Territory in Canada and the Antarctic while working with the migration stories of survival. Dr Anderson has created many large scale artworks that challenge notions of occupation of the City, including Writing the City, a three-year program of installation works to shift the use of Sydney to being a city of public space in its pre-Olympic development. Singing up Stones celebrated the people who created and use the Opera House and the Quay for performance and ideas. This included the first image projection onto the Sydney Opera House, a projection onto the Sydney Harbour Bridge and a ballet of cruise liners with the sound simulcast on the local radio station. Two digital prints with acrylic on metal and bullet holes. This work is the result of research on the hidden voice of landscape undertaken by Dr Lisa Anderson while an Honorary Professor at Federation University Australia. lisa anderson, available

A press release from Melbourne Legacy in 1975 which relates the story of George Knocks who joined Legacy and left a bequest that made a difference. The information was intended to be used by press and magazines etc. A longer version of the story is in the Weekly Bulletin - 29 Sept 1964. George was described as a lonely ex-seaman who migrated to Australia after the first world war. He learnt about Legacy and the work with widows and children. 'He joined up as a Legatee and from that day, the pattern of life changed greatly for George. He became absorbed in his new environment and spent most of his time with the children. The mothers founding him a rugged, but completely trustworthy friend.' When George died he was mourned by many Legacy friends. His left his property to four comrades, as trustees to use in continuing Legacy's work. As a result, a great many people in Legacy's care were helped, in all sorts of ways. One of them was Barry. Barry's father had died as a POW in a Japanese prison, and his mother had lost all her possessions in evacuating from Malaya. Barry had a disability and in time a new treatment was found, but it was expensive. Then Legacy came to aid Barry with money from the George Knocks fund. After long series of operations and treatments Barry made a wonderful recovery. While the fund ran out during the treatment, the last cost was met by The Stanley Savige Memorial Trust, which was a fund raised by the members of Legacy to honour the memory of their former leader. Barry went on to prosperous work, self sufficiency and a lovely marriage. Due partially to Legatee George Knocks, his bequest and the support of Legacy. More information on George Knocks includes his passport and a longer version of his story. See 02151 and 02152 and 02153.A record of how Legacy promoted their work in the 1970s and the story of the life of a legatee.Yellow foolscap page x 2 with black type of a press release in 1975.Title 'One Man's Legacy''press release, promotion, bequests, george knocks

Handwritten copy of Bendigo Advertiser reports of water in New Chum Mines. (1) 'The water rose yesterday, 9 feet in the Victoria Quartz mine and now at 3215 ft. Bgo. Adv 6/7/1910 page 7. (2) 'New Chum Mines. Futile attempts to cope with water. Despite the fact that bailing is being carried on steadily, the water has risen 55 feet in the last 24 hours, and is now up to 3160 feet. New Chum Consolidated has since last week raised 327,000 galls, but the bailing has made no perceptible difference. The Lazarus to start on Monday.' Bgo Adv 9/7/1910 Page 9. (3) Letter to Adv by A. L.N. Excerpts. 'Bailing should have commenced at New Chum Railway.' 'The bulk of water is at South end. 3.5 million galls per month, divided between South Belle Vue, Eureka Extended and New Chum Railway.' 'In black and white, the Railway in the wet season, July last year with the aid of the Cornish Lift, raised 2.25 million galls, besides attending to those employed below.' 'Safe to say that 3.5 million galls per month could be raised from the present water level.' 'The plant is strong with abundance of steam space which would allow the firewood to be used economically under the barborous Cornish Boiler or wood-eaters'. Bgo Adv 14/7/1910. Document from Albert Richardson Collection of mining history.document, gold, drainage problems, new chum drainage association, water in new chum mines, victoria quartz, new chum consolidated, lazarus, new chum railway, south belle vue, eureka extended, cornish lift, bendigo advertiser 6/7/1910 page 7, bendigo advertiser 9/7/1910 page 9, bendigo advertiser 14/7/1910

an original Great Train Race publicity sign - from inaugural first great train race held on 16 May 1982 ran by the Puffing Billy Preservation society to raise funds for the restoration of G42 Garratt Locomotive Historic - Puffing Billy Railway - PBRS fPublicity event signGreat Train Race Sign - Black printed ink Paper sign glued on to Masonite wood The Great Train Race - 16 May 1982 - 13.5km Belgrave to Emerald Lake a fun run with a difference - "Race Puffing Billy " can you beat Victorias famous 76 year old train ? are you fit enough? Start 9 am at Belgrave Railway Station and enjoy a Sunday morning jog thru the scenic Dandenongs - join your family & friends at beautiful emerald lake finish - enjoy BBQ facilities & other family attractions Prizes outright winner ( not Puffing Billy ) will receive two return tickets to USA on Pan Am Team Prize the four runners with the fastest aggregate team time will each win a return air ticket to Sydney on TAA to compete in the 1982 "the Sun City to surf" Random draws of entrants will be made at 11Am for the many other valuable;e prizes - all proceeds to aid the restoration of Puffing Billy's big brother G42 PAN AM TAA Trans Australia Airlines

This is a set of three photographs of personnel from the Detachment - Army Survey Regiment taken in front of its main map production building at Bonegilla, Victoria in c1973. This cartographic map production sub-unit of the Army Survey Regiment operated in buildings owned by the School of Military Survey from 17th of June 1970 to the 30th of September 1985. A total of 800 topographic maps ranging in scale from 1:25,000 to 1: 250,000 scale were completed. A major focus of production in the 1970s was the cartographic completion of the Papua-New Guinea 1:100,000 map series and the Flexiflow quality control system was developed as a tool to coordinate production. The Flexiflow system comprised a series of job plans and charts linked to a task allocation to resource magnetic planning board. Using critical path analysis and task prioritisation, complex job planning was efficiently scheduled, and re-prioritisations readily made. Reproduction requirements were effectively coordinated by way of weekly courier to the Army Survey Regiment at Bendigo. Supervisors and technicians fully embraced the system as they could understand their role, others around them and the positive production achievements. WO1 Bill Boyd (who does not appear in this photograph) was the technical warrant officer for 11 years at the Detachment was awarded the OAM, the Order of Australia Medal for leading the development and the implementation of the Flexiflow system. By mid-1982, production of maps at these scales was undertaken digitally on Bendigo’s AUTOMAP 2 system and the Detachment reverted to production of small-scale large format RAAF aeronautical charts. Detachment personnel managed to produce 18 charts in the following two years, which was an impressive achievement for the staff, given major differences in format, specification and scales. Development of digital production of aeronautical charts in 1984-85 led to gradual reduction in production output and contracting out production was instigated to meet the shortfall and as a consequence the Detachment closed in September 1985. See pages 177 to 180 of Valerie Lovejoy’s book 'Mapmakers of Fortuna – A history of the Army Survey Regiment’ ISBN: 0-646-42120-4. for more information on the history of the Detachment at Bonegilla.This is a set of three photographs of the Detachment - Army Survey Regiment taken in front of the main map production building at Bonegilla, Victoria in c1973. The photographs were printed on photographic paper and are part of the Army Survey Regiment’s Collection. The photographic proofs were scanned at 600 dpi. .1) to .3) - Photo, black & white c1973. Back Row L to R: Peter Simpson, Chris Edwards, unidentified (x2), Colin Harden, Rowan Gillies, Bob Rowley OAM, Steve Hansen, Stu Thaxter. Centre Row L to R: Kevin Boehm, Dennis McCarthy, Peter Cross, unidentified, Brian Ryan, unidentified, Ian Marner, unidentified, Phil Smalley. Front Row L to R: Geoff Haynes, Bruce Wetzig, Dave Thompson, unidentified, OC Bob Roche, Ike Lever, John McCulloch, Dick Barwald, unidentified. There are no personnel annotated.royal australian survey corps, rasvy, army survey regiment, detachment - army survey regiment, army svy regt, asr

6NBH - Excursion Car NBH SECOND-CLASS EXCURSION CAR. The H was recognising their use for "Holiday" traffic. 15 of these cars were built in 1919 and numbered 1-15. Two more were built in 1981, and numbered 16 & 17. Two extended versions for wheelchair passengers were built in 1981 & 1983. These were numbered 51 & 52 - a separate number series due to the different type of vehicle. Six, numbered 18-23, were built in 1997-98. These had steel frames, padded seats, and a wide "window sill". At first glance they look the same as the previous NBHs. There are other minor construction differences due to the use of steel framing. 18NBH entered traffic 19/4/1997; 19NBH on 5/12/1997; 20NBH on 19/12/1997, the others added in 1998. VR Service History : 9/ 7/1900 NWS Built new as 46 NQR converted & renumbered to 12/ 4/1919 - To NBH 6. VR Service History NQR 46.VA - 9/ 7/1900 NWS Built new - 12/ 4/1919 - To NBH 6.VA - *NBH 6.VA - circa 1919 - Reference Photo SL20 p20 / 6/1928 - Modified AC Malco BO circa 1955 - Condemned - / 5/1967 BEL Photograph #9.2: part view Puffing Billy Service History or Notes 12 Apr 1919 - Nos 1 to 6 NBH (new) delivered to UPPER FERN TREE GULLY after this date. PRO photos NBH CLASS CARRIAGE No.6 CARRIAGE NARROW GAUGE PERSPECTIVE VIEW PRO Photo RS 0059 http://wiki.prov.vic.gov.au/thumbs/12800-P0004-000007-010t.jpg NBH CLASS CARRIAGE No.6 CARRIAGE NARROW GAUGE SIDE VIEW PRO Photo RS 0060 http://wiki.prov.vic.gov.au/thumbs/12800-P0004-000007-020t.jpg NBH CLASS CARRIAGE No.6 NARROW GAUGE PICNIC TRUCK INTERIOR PRO Photo RS 0062 http://wiki.prov.vic.gov.au/thumbs/12800-P0004-000007-040t.jpgHistoric - Victorian Railways Narrow Gauge - Passenger Rolling Stock: Excursion Car6 NBH - Passenger Carriage - Excursion Car made of wrought iron and timber6NBHpuffing billy railway, nbh, narrow gauge, victorian railways, excursion car

Glass manufacturing has evolved over thousands of years. Glass making has been traced back to 3500 BC in Mesopotamia. The earliest known glass objects were beads, perhaps made by accident while working with metal. In the late Bronze Age, several civilizations discovered how to make vessels and glass bottles by wrapping threads of melted glass around cores of sand or clay. Later, moulds were used to form dishes and table wares. Around the 1st century BC, glassblowing was discovered. This made glass containers less expensive than pottery. Mould-blown glass, the process of blowing a piece of molten glass into a wooden or metal mould, was invented during the 1st century AD. This technique was faster with more consistent results. It paved the way for mass production. It wasn’t until the late 1800s that the production process to become more efficient. In 1887, a company in England created a semi-automatic process that could produce up to 200 bottles an hour. This process has been refined to the point where modern machines can yield more than 600 containers per minute. Blown vs. Manufactured Glass Bottles Nowadays, glass bottles, jars, and cups are usually manufactured on a bigger scale than is found in individual glassblowing studios. If we still depended on hand-blown glass for all of our glass containers, we would see some major differences in the process of creating bottles and jars. First, there's the time. Hand blowing glass takes a significant amount of time, even for one simple container. In contrast, hundreds of jars per minute can be made using modern technology. This leads to the second advantage: price. Because of the automated and streamlined process, the price for manufactured containers is much lower than that of hand-blown glass. Third, manufactured bottles will be much more consistently uniform than bottles blown by hand. Automated glass manufacturing produces nearly identical batches of jars. Glass blowing is awesome for unique, beautiful pieces of art. But for lots of lower priced and uniformly shaped containers, automatic manufacturing is the preferred method to create glass bottles and jars. https://www.containerandpackaging.com/resources/glass-bottles-brief-history The invention and development of glass for domestic items including bottles, has been nothing short of revolutionary. The use of glass bottles, that could be easily washed, led to improved hygiene, and mass manufacturing of drinks of all types, including milk, cordial and alcoholic beverages.Green Glass Bottle Possibly a ginger beer bottle.Concave indentation at the base. Also on base are two raised lumps. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, glass

Set of 17 decimal currency MMTB / MTA / The Met, tram tickets. All black printing unless noted otherwise. A variety of small size (55H x 26W) or large format (68H x 31W). .1 - 30c, large, on light pink paper, printed with red ink, No. Aa398115 .2 - 35c, large, off white paper, printed with light green ink, No. At 660840 .3 - 35c, large, off white paper, printed with dark green ink, Ac672942 .4 - ditto, but number Abc 573789 .5 - 40c, large, on off-white paper, but printed with a black pattern in the background, Ad 609815 .6 - 40c, large, on grey paper, Aa019636 .7 - 45c, large, on off white paper, printed with pink ink and the price in reverse image Aw 327624 .8 - 45c, large, on off white paper, printed with a pink pattern in the background, Ac596735 .9 - 50c, large on yellow paper, Ac382471 .10 - 50c, large on off white paper, printed in green ink with the price in reverse image Bb571083 .11 - 60c, large, on off white paper, printed in red ink, Ba454229 .12 - 60c, large, on off white paper, printed in brown ink with the price in reverse image Be 045844 .13 and .14 - 75c, large on off white paper, printed with teal ink, U508902 (issued by MTA), also R070196 .15 - 80c, large on off white paper, printed with dark green ink, Bb231639 .16 - 80c, large on off white paper, printed with green ink, issued by The Met, E873522 .17 - $1 - large, on off white paper, Aa431186 See also Reg Item 3342 for similar tickets, but with some differences.trams, tramways, mmtb, mta, the met, tickets, city section

A typed reprint of an article that appeared in The Herald. It is an account of the founding of Somers Camp by Lord Somers. The camp began in 1921 when the Duke of York started a summer camp for boys at Littlestone Aerodrome in England. It was an experiment in bringing together boys from different walks of life to encourage understanding and mutual appreciation of each other. While Lord Somers was Governor of Victoria he started a similar camp here with equal success. Part of the text: "Our aim is to change and improve the mental attitude of the boys to each other — to beget a state of mind in which the two sets merge in each other. As the period of the Camp is short — only one week — every effort is made to give the boys full scope for recreation and play. We do not wish to give them a busman's holiday and saddle them with numerous domestic duties, and so they are free of nearly all these, and can devote the whole of their time to themselves. We wish, too, to give them absolute freedom, with as little hampering discipline as possible, and so long as the simple rules of the Camp, such as punctuality at meals and so on are observed, they can do what they like. The Group Leaders take charge of the organised sports, and as each group is composed of boys from both school and workshop, unity is preserved. Superficial differences in worldly pros perity vanish at the Camp; you can't tell one from t'other; a feeling of comradeship in a common life manifests itself; a spirit of loyalty to each other, and to the ideals behind the camp quickly emerges; artificial barriers tumble down, and we are all one, That, in brief, is the spirit of the Camp. But, of course, that is not the beginning and end of it, for if it were, the benefit would be merely temporary, and the effects would pass off. And so I come to the other and, to my mind, the more important function of the movement which finds expression in what we call the Power House. The Power House is a continuation of the Camp. Every boy who attends the Camp becomes automatically a member of the Power House. The Camp is the Open Sesame to the Power House, and whereas in the Camp the boy has merely enjoyed himself, when he graduates to the Power House he begins to imbibe the spirit of service and to learn that he has responsibilities, both to himself and to others. The Power House has already taken concrete form in the shape of a building in the Albert Park which constitutes a sort of headquarters."A record of the camp at Somers in the words of the founder.Foolscap page x 2 of black type of an article in the HeraldHandwritten 'JL11/10' in black pen, 'Lord Somers and Power House' in blue pen.camp, lord somers camp, lord somers

The National Wool Museum accepted a donation from Brian Licence in 2022 of several mementoes relating to his career in the wool industry. Brian studied Wool Classing and worked for a decade in this profession before moving to Melbourne which required him to change careers. These Member’s Tickets served as proof of Brian’s membership to the Woolclassers’ Association of Australia from 1962 to 1972. The Woolclassers' Association of Australia was a trade union representing Woolclassers in Australia. It amalgamated with the Australian Workers Union in 2009. The Association had 1200 members in 1997. 11 individual-coloured booklets, 10 original and 1 duplicate. The duplicate is from the year 1965/1966 when Brian Licence transferred from being a probationary member of the Woolclassers’ Association of Australia to a full member and hence received a new ticket which reflected this change. Internally, there is no difference in any of the booklets over the 10 years. Externally, there is only a slight change, with the Woolclassers’ Association of Australia's logo being included from 1965/1966 onwards. The booklets are a single piece of card folded at the middle to make 4 pages. The first page gives the name of the association, the year of issue, and in later years the Association's logo. Internally, the booklet provides the location of the Association, the name, address, and signature of who the booklet certifies, and details about the member’s rank, an Overseer, Expert, Full, or Probationary Member. The date and signature of the Secretary of the Association conclude the internal pages. On the rear page, the Head Offices of the Woolclassers’ Association of Australia branches in NSW, Victoria & Tasmania, South Australia, Western Australia, and Queensland are provided. Booklet one is on yellow card with black text and is for the years 1962/1963 Booklet two is on aqua card with black text and is for the years 1963/1964 Booklet three is on blue card with black text and is for the years 1964/1965 Booklet four is on orange card with black text and is for the years 1965/1966 Booklet five is on orange card with black text and is for the years 1966/1967 Booklet six is on red card with black text and is for the years 1967/1968 Booklet seven is on white card with green text and is for the years 1968/1969 Booklet eight is on turquoise card with black text and is for the years 1969/1970 Booklet nine is on cream card with black text and is for the years 1970/1971 Booklet ten is on a lavender card with blue text and is for the years 1971/1972 Booklet eleven is on peach card with black text and is for the years 1972/1973 Multiple. See multimediawool classing, brian licence, woolclassers’ association of australia

Black and white photographs of various sizes pasted on cardboard for display purposes. Some annotated. (1) (2) Difference between leaf and fruit buds. (3) "The 'rod' or whip is most suitable plant to commence training." (4) Planted and pruned fruit tree. "School of Horticulture and Primary Agriculture Burnley B. 1 " stamped on reverse. (5) "Pear Tree-Unpruned (1) June." (6) "Same Pear Tree-Pruned (2) June." (7) Young unpruned "William bon Chretien". Reverse, Burnley Stamp. (8) Same tree pruned. Reverse, Burnley Stamp. (9) Unpruned pear tree. (10) "Narrabben" plum before inserting branch spreaders. (11) With branch spreaders. (12) Close up of some of its branches without spreaders. (13) Close up of branch with seaders. (14) Plum tree with spreaders. (16) Close up of fruiting spurs. (17) "Apple Blossom Oct. Reverse, p 163(Oct." )(18) Same photograph enlarged. (20) Close up of fruiting buds. (21) Old unpruned apricot tree. (22) "Unpruned branch of apricot tree." (23) Close up of apricot branch. (24) "Same branch-apricot-pruned June Reverse, p99 (June)."(25) Pruned branch stump of mature fruit tree.(26) "Clean saw cuts with sharp knife." (27) "Treat all large wounds on trees to avoid infection by wood rotting fungus." (28) "Apply coating of lead paint or grafting mastic." (29) "Branch of lemon-unpruned Aug. Reverse, p157 (Sept.)." (30) "Same branch of lemon-pruned Aug. Reverse, p 157 Aug."(31) "Young climbing rose-ready for planting-July." (32, 33) Grape vine before pruning. (34) Same vine pruned and trained. (35) Older vine pruned.fruit bud, rod, whip, school of horticulture and primary agriculture, burnley, pear tree, spreaders, plum tree, apricot tree, fungus, lead paint, lemon, roses, grape vine, leaf bud, training, fruiting spurs, apple blossom, grafting mastic, teaching, a w jessep