Yields information about tram 40, the Lydiard St terminus tram stop and the Sebastopol tram terminus and tram 40.Agfa blue/white mount, colour slide of tram 40 at both the Lydiard St North and Sebastopol terminus. Both over exposed photos. .1 - No. 40 early in the morning given the sun position, shows the cemetery gates and the tram stop sign on the west side of the road. The conductor is boarding and the driver is in the cabin. Tram has the destination of Sebastopol. .2 - has the tram side on, with the Royal Mail Hotel in the background. Slide not dated, but based on slide mount and views and Reg item 7483, likely to be 27-4-1965tramways, trams, lydiard st north, sebastopol, tram stops, tram 40

Yields information about intersection of Lydiard and Sturt Streets, in particular the post office building.Black and white photograph of SEC Ballarat tram No. 18 turning from Sturt St. into Lydiard St. with Post Office in background. Photo taken after tram has passed photographer. Tram has destination of "LYDIARD ST NTH". Taken 4/8/1968. Print a bit over exposed for the sky. 585.1 - a horizontal view of the same image. See also Reg Item 1014 for a different crop (vertical) view of the same photograph. Small copy of .1 added 10/10/2019. Image updated.trams, tramways, ballarat, lydiard st., post office , tram 18

Yields information about the Phoenix foundry and tramway crossing in Sturt St in 1950.Newspaper Clipping from The Courier, 12/2/1950 titled "Rail Lines link with Old Phoenix Foundry", about the uncovering of the rails left in Sturt St at Armstrong St, part of the former Phoenix Foundry line - uncovered during rail replacement activities. Has a photograph showing the two exposed ends of workers replacing the rail line and gauging the track. Gives a short history of the Phoenix Foundry. Contained within Reg Item 5507 - Foolscap binder with green covers, black binding edge and metal clips. sturt st, trackwork, phoenix foundry

HOSKING AND HUNKIN COLLECTION: Tin Type Photos Three photos (Tin Type) exposed on tin depicting family members. 11402.25a Front of Photo William and Emily Hunkin 3/3/1878 11402.25b Rear of 11402a Scratched on back 'Hunkin b.Nerring xxxxx Eaglehawk William 1876 Emily 3/3/1873 11402.25c Emily Hunkin 3/3/1878 11402.25d on the front four men in work clothes standing behind man seated. 11402.25e Scratched on back of photo 'Hunkin Father and sons xxxxxxx'photo

The incomplete set of copper stencils was used some time ago to print Old English letters. They still have the remains of black ink on them. The user places the stencil on top of the surface to be labelled, then paints, rolls or brushes ink onto the surface of the stencil, allowing the ink to cover the surface that is exposed by the cutout in the stencil. Stencils in a variety of materials have been in use for thousands of years to reproduce images and letters; examples include wood, metal, cardboard, paper and wax. The box once contained a Silver Stork brand feather pen.The stencil set represents a form of manually produced printing and labelling. The process has been used Stencils, copper; twenty-two stencils of the old English alphabet, stored in a pale green cardboard rectangular box that once contained a feather pen called The Silver Stork feather pen. Box is labelled "The Silver Stork" "A Scribbling Pen" Image; [a feather' with text "Silver Feathers" flagstaff hill, warrnambool, flagstaff hill maritime museum and village, great ocean road, stencil set, copper stencils, silver stork, feather pen, printing, labelling, reproduction, stencilling

These boots had a metal plate inserted in sole to protect the feet of personnel wearing boot. This was after earlier boots without this protection did not protect the wearer from sharpened spikes eg bamboo set in pits or “punji” pits, during the Vietnam war. The laces were done up by knotting one end,threading from bottom hole across to opposite hole,up next hole on same side,across to opposite hole etc. This meant that only one loop per opposite holes was all exposed for a quick and easy cutting to release the boot in case of injury to wearer.These boots were typically worn on parade,training and in combat during the Vietnam war era and after.The LEFT boot solid black leather uppers with split leather tongue sewn to sides - making the boot semi water and insect proof.The sole is hard black rubber compound with 7 cleats on sole and 3 cleats on heel,all part of rubber sole. Woven black cotton laces. 30 mm leather reinforcing strip sewn on inside top of boot. 11 by 5mm metal holes per boot for laces. Sole is welded on. “Dunlop made in Australia” and “5/5” on sole in front of heel. Inscribed on top reinforced inside leather band is- “ B 22 R.B.T 1439 188” on one side and “ 5/6” on the other.boots, general purpose, g.p., vietnam war

These boots had a metal plate inserted in sole to protect the feet of personnel wearing boot. This was after earlier boots without this protection did not protect the wearer from sharpened spikes eg bamboo set in pits or “punji” pits, during the Vietnam war. The laces were done up by knotting one end,threading from bottom hole across to opposite hole,up next hole on same side,across to opposite hole etc. This meant that only one loop per opposite holes was all exposed for a quick and easy cutting to release the boot in case of injury to wearer.These boots were typically worn on parade,training and in combat during the Vietnam war era and after.The RIGHT boot solid black leather uppers with split leather tongue sewn to sides - making the boot semi water and insect proof.The sole is hard black rubber compound with 7 cleats on sole and 3 cleats on heel,all part of rubber sole. Woven black cotton laces. 30 mm leather reinforcing strip sewn on inside top of boot. 11 by 5mm metal holes per boot for laces. Sole is welded on. “Dunlop made in Australia” and “5/5” on sole in front of heel. Inscribed on top reinforced inside leather band is- “ B 22 R.B.T 1439 188” on one side and “ 5/6” on the other.boots, general purpose, g.p., vietnam war

22 of a collection of 70 Black & White photographs taken during the construction of the second Phillip Island Bridge from San Remo to Newhaven by Country Roads Board and Shire of Bass. Contractor John Holland & Co. Pty. Ltd.14 Black & White photographs of the construction of the second Phillip Island Bridge in 1966 - 1969. 351-09: Pile driving on Newhaven abutment. 351-10 & 11: Concrete beams. 351-12: Pile driver. 351-13 & 14: Machinery. 351-15: Dismantled section of cylinder. 351-16 & 17: Coffer dam and pier construction. 351-18: Man up on scaffold. 351-19 & 20: Construction work. 351-21: Two workmen and man leaning on section of handrail exposed to weather. 352-22: View of construction work.Descriptions as above on some. Plus the following Numbering: 351-09: CRB NEG 67-274C. 351-10: CRB NEG 67-542. 351-11: CRB NEG 67-654F. 351-12: CRB NEG 66-605. 351-13: CRB NEG 66-601. 351-14: CRB NEG 68-752B. 351-15: CRB NEG 67-936. 351-16: CRB NEG 67-937A. 351-17: CRB NEG 67-937B. 351-18: CRB NEG 67-1156D. 351-19: CRB NEG 67-1156B. 351-20: CRB NEG 66-1026E. 351-21: CRB NEG 67-940. 351-22: CRB NEG 67-1218Bphillip island bridge construction, 2nd phillip island bridge construction, country roads board, shire of bass, sasha stark

Standard issue battle dress pants, issued by defense department. Khaki Pattern 1949 Battle Dress trousers. Four hidden buttons in front closure. Nine exposed buttons around circumference of waistband. Seven internal plastic buttons around inner waist. Two large back pockets with hidden button under flap of each pocket. One large pocket with flap and hidden button on side of left leg/thigh. Bottom of pants hemmed with extra brown fabric attached on inner of each leg hem. Regular side pockets at front of each leg. At rim of each side of the pants there is a buckle feature. Sewn patch with faded illegible subscription. No. 18 visible. Regimental No. ...................... Name_______________ Stamp on inner waist band - 'D ^ D'.military uniforms, army, battle pants

Home is a collection of birdhouses on floating islands using the iconic form of the human house - a pitched roof, square walls, windows and doors. This minimal form is often drawn by children; a dolls house, a cubby house, a letter-box or a chook house. Home creates a safe refuge for birds with the plants acting as a water filtration system. The exposed roots draw out pollutants, such as nitrogen, phosphorous and toxic metals, which have entered the waterway through urban run-off. The result is a beautiful sculptural experience and a healthier water system for all to enjoy. The artwork was funded by The City of Ballarat and The Victorian State Government.The work is of aesthetic significance to the people of BallaratHome is a collection of birdhouses on floating islands home, chris mether, studio mether, public art, ballarat, delecombe, wetlands

A central tableau is beautifully lit to expose choreographed arrangements of plants, animals, objects and food. Grounded in a photographic aesthetic that echoes Dutch Old Master paintings, they examine the industry and practices that have so effectively brought damage to traditional Aboriginal culture, the natural environment of the Australian continent – and the globe. Each image explores an aspect of the devastating impact of colonisation on Australia’s First Nations peoples, and the global repercussions of environmental degradation. The translation of the French in the title of this series, “Natures mortes” is dead nature. Yet in the simmering emotional register of each image lies an inherent belief in the individual over environment, and the redemptive nature of culture. australian first nations art, photography, colonialisation, environment

A central tableau is beautifully lit to expose choreographed arrangements of plants, animals, objects and food. Grounded in a photographic aesthetic that echoes Dutch Old Master paintings, they examine the industry and practices that have so effectively brought damage to traditional Aboriginal culture, the natural environment of the Australian continent – and the globe. Each image explores an aspect of the devastating impact of colonisation on Australia’s First Nations peoples, and the global repercussions of environmental degradation. The translation of the French in the title of this series, “Natures mortes” is dead nature. Yet in the simmering emotional register of each image lies an inherent belief in the individual over environment, and the redemptive nature of culture. australian first nations art, photography, colonialisation, environment

A central tableau is beautifully lit to expose choreographed arrangements of plants, animals, objects and food. Grounded in a photographic aesthetic that echoes Dutch Old Master paintings, they examine the industry and practices that have so effectively brought damage to traditional Aboriginal culture, the natural environment of the Australian continent – and the globe. Each image explores an aspect of the devastating impact of colonisation on Australia’s First Nations peoples, and the global repercussions of environmental degradation. The translation of the French in the title of this series, “Natures mortes” is dead nature. Yet in the simmering emotional register of each image lies an inherent belief in the individual over environment, and the redemptive nature of culture. australian first nations art, photography, colonialisation, environment

A central tableau is beautifully lit to expose choreographed arrangements of plants, animals, objects and food. Grounded in a photographic aesthetic that echoes Dutch Old Master paintings, they examine the industry and practices that have so effectively brought damage to traditional Aboriginal culture, the natural environment of the Australian continent – and the globe. Each image explores an aspect of the devastating impact of colonisation on Australia’s First Nations peoples, and the global repercussions of environmental degradation. The translation of the French in the title of this series, “Natures mortes” is dead nature. Yet in the simmering emotional register of each image lies an inherent belief in the individual over environment, and the redemptive nature of culture. australian first nations art, photography, colonialisation, environment

A central tableau is beautifully lit to expose choreographed arrangements of plants, animals, objects and food. Grounded in a photographic aesthetic that echoes Dutch Old Master paintings, they examine the industry and practices that have so effectively brought damage to traditional Aboriginal culture, the natural environment of the Australian continent – and the globe. Each image explores an aspect of the devastating impact of colonisation on Australia’s First Nations peoples, and the global repercussions of environmental degradation. The translation of the French in the title of this series, “Natures mortes” is dead nature. Yet in the simmering emotional register of each image lies an inherent belief in the individual over environment, and the redemptive nature of culture. australian first nations art, photography, colonialisation, environment

This set of kitchen dry food canisters is made of metal; each container has a different height, width and capacity. The rolled thin metal has created a strong, round design with decorative rings on the circumference. The base and close-fitting lid protect the contents from vermin and most insects, and the handle on top aids in the removal of the lid. Metal containers like these are reusable and can be re-purposed, which is advantageous when living in regional or rural areas. The type of manufacture indicates that the set was made in the late 19th to early 20th century. Gradually, colourful and attractive plastic kitchenware began to replace metalware. One of the canisters is labelled 'coffee'; coffee plants and seeds were transported from Brazil into Australia in 1788 when the First Fleet arrived although their growth was unsuccessful. However, by the 1920s, a tenth of the Australian population was drinking readily stored coffee. Large quantities of harvested grains such as maize, wheat and barley were protected from pests by being stored in airy buildings, often raised from the ground. This was an age-old practice used by civilizations such as the ancient Egyptians and early Hebrews. Smaller quantities of food for short-term use in the homes were stored in woven baskets or clay pots.This set of kitchen food containers is an example of colonial food storage used in a domestic setting to store and preserve dry ingredients. These canisters give a snapshot of early domestic life in Australia. Canister set; four cylindrical cream coloured metal canisters with domed lids that have lift-up handles on top. They are made from rolled metal and the bases and lids have a side seam. Each canister is a different size and displays a label for different contents. The adhesive labels are vertical, and a gold colour with black vertical text. The cream paint has brush strokes and small areas have exposed green paint under the cream. The insides of the bases are painted dark grey but the lids have no paint underneath. The empty canisters can fit one inside the other. Labels, in descending order: "FLOUR" "RICE" "SAGO" "COFFEE"flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, canister set, kitchen storage, food storage, metal canisters, dry food storage, food packaging, kitchen container, vintage, flour, rice, sago, coffee, kitchenalia, late 19th to early 20th centuries, nesting canisters

This timber fragment is from the shipwreck of the SCHOMBERG (1855). The bow of the ship broke off after an unsuccessful salvage attempt to tow her off the Peterborough reef. At the wreck-site the submerged hull points north towards the beach but the front section is missing. Parts of the bow have been carried away by the eastward bearing ocean currents and have come ashore on the western coast of New Zealand’s South Island. Don Charlwood writes in Wrecks & Reputations (1977) that in 1871 “a piece of wreckage over 20 feet long and 12 feet wide was brought out” by land from its remote location at Tauperika Creek. In 1875 “an even larger section was brought out by sea”. It was suggested at the time that these relics of a large wooden sailing ship were from the wreck of the SCHOMBERG some 20 years earlier on the Victorian coast. “To corroborate the theory”, Charlwood continues, “a piece was sent to Halls of Aberdeen [the ship’s builders in Scotland]. They identified it as having come from the ship they had launched with such pride in 1852.” Charlwood, whose great-grandparents were passengers on the SCHOMBERG’s fateful maiden voyage, acquired some samples of the wreckage timber recovered in New Zealand, and brought them back with him to Australia. In 1976 “comparison was made of timbers from the New Zealand find and timber from the remains of the hull at Peterborough. They proved to be from the same ship.” The extraordinary journey of these pieces of wood from the once mighty clipper ship SCHOMBERG came to an end in 1984, when they were given to Flagstaff Hill by the author, and reunited with other shipwreck timbers and copper bolts from the vessel that are on display at the Maritime Village. The shipwreck of the SCHOMBERG is of State significance - Victorian Heritage Register S612The artefact is a small piece of wood that was broken from the timbers of the shipwreck of the SCHOMBERG (1855) and carried by the eastern currents to New Zealand (1875). It has 2 drilled holes that show faint screw marks and no metallic residue (possibly for patent treenails). The top surface is rounded, of a dark colour, and showing clear grains that have been worn smooth by the action of the sea. There is a reddish stain on the timber where breakage has occurred. The wood appears to have been strong in its original condition but is now light to lift and soft and crumbly at its exposed edges. The artefact is in fragile condition.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, schomberg, shipwreck timber, don charlwood, ‘wrecks & reputations’

Set of ten colour photographs of the renewal of the sleepers under the level crossing on the main access line, BTM Depot, taken by Warren Doubleday on 13.09.2002. Printed on Agfa Paper. 2603.1 - Commencing excavations - Oedf Byslma on backhoe. 2603.2 - Exposing and pulling out sleepers. 2603.3 - offloading sleepers 2603.4 - inserting sleepers 2603.5 - ditto 2603.6 - Sleepers installed 2603.7 - view along inside rail 2603.8 - view along outside rail 2603.9 - Dog spiking - Alan Snowball, Greg Histen , Danny Smith, Richard Gilbert and Garry Wood, 2603.10 -ditto On rear of each photo in brown felt tip pen, the details of the location and date.btm, access track, trackwork

Art collection Previously located in History HouseThe painting depicts a large body of water surrounded by tree-covered riverbank. Depicted in shades of blue and grey, the water features patches of brown and blue which illustrate the reflections of riverbank trees. In the foreground to the left of the water is a large tree which extends up to cover the top left skyline of the work. Featured in the background is a dense patch of trees completed in shades of blue. To the right of the water is a dense patch of trees completed in shades of brown and black. These trees reach into a purple and blue cloud-filled sky. The work has a gilded ornate frame with cardboard and gold mount and exposed canvas.Front: A.S. Murray Plaque attached to frame: SCENE on the RIVER MURRAY Back: (no inscriptions)

This building at 21 Brougham Street, Eltham, known previously as The Light Factory, now Second Home restaurant, was designed by Alistair Knox and is one of the few commercial buildings he designed. It was a combined residential (rear) and factory (front) development. The Light Factory Gallery; OnlyMelbourne "The Light Factory Gallery was built in 1973 and is a classic example of his design. Exposed soaring six metre Oregon beams, handmade bricks, clerestory windows flood the building with natural daylight giving treetop views of the eucalypts that he designed the building around." The Light Factory Gallery. (2024, March 31). Retrieved from https://www.onlymelbourne.com.au/the-light-factory-galleryjim connor collection, brougham steet, eltham, alistair knox design, industries, restaurants, second home, the light factory gallery

'Loren' (formerly James Hogg's house) is a two-storey gabled prefabricated house, constructed using broad-gauge corrugated iron and was originally erected at 60-62 Curzon Street, North Melbourne in 1853 for builder, James Hogg. By 1968 the building had deteriorated and it was dismantled and moved to Old Gippstown where it was re-erected and restored. The building's external framing system consists of exposed metal columns with Gothic panel motifs at the corners. Internally the timber framed walls have been finished with new papers over new Hessian. The corrugated iron roof has an unusual concave form and the windows, floors and doors are of moulded softwood. State historic significance as a rare type of iron prefab. house. Listed on the Victorian Heritage Register and covered by a Heritage Overlay, Latrobe City Planning Scheme. It is also listed on the Register of the National Estate.Tall square-shaped two-storey corrugated iron building with a curved corrugated iron roof with two outside brick chimneys. prefabricated iron houses, old gippstown, west gippsland, gippsland, gippsland heritage park, goldfields, coal mine, victorian era, moe, historical village, city of melbourne, north melbourne, curzon street, james hogg, prefabricated house, two-storey gabled prefabricated house, old gippstown heritage park, latrobe valley, loren, latrobe city council

These five photographs were most likely taken in the 1970s in Lithographic Squadron at the Army Survey Regiment, Fortuna, Bendigo. Photos .1P to .3P are annotated with the name of the technicians written on the back. Although Photo .4P is not annotated the technician is positively identified. In these five photos the technician is applying a UV-sensitive pigmented dye emulating one of the print colours to a white opaque polyester sheet mounted on a rotating table in a whirler. The coated sheet was dried before placement in a vacuum light frame beneath a stud registered map negative. They were then exposed to a carbon arc lamp. If there was more than one negative – typical for a type impression or 1st proof, the process was repeated for the other negatives of that print colour. There was a single exposure for composite negatives which was typical for the 2nd and final proof - the pre-press proof. The sheet was removed and washed with water and dried leaving the exposed colour impression. The technician repeated this process using process or spot dyes for remaining publication colours. Type impressions were a combination of the map grid and the topographic features in their correct print colours, forming a base for the cartographer to accurately position map names and symbols on a clear film overlay. The pre-press proof was a cost-effective way of producing a one-off visual copy of the map or chart product. It enabled cartographers to perform a quality inspection and correct any faults before publication. The pre-press proof was deemed authoritative before its release to Print Troop for bulk printing and distribution.This is a set of photographs of lithographic technicians preparing map proofs at the Army Survey Regiment, Bendigo c1960s c1970s. The photographs were printed on photographic paper and are part of the Army Survey Regiment’s Collection. The photographs were scanned at 300 dpi. .1) - Photo, black & white, c1970s, SGT Graham Jeffers, Lithographic Squadron .2) - Photo, black & white, c1970s, SGT Ken Slater Lithographic Squadron .3) - Photo, black & white, c1970s, Ian ‘Loft’ Turner, Lithographic Squadron .4) - Photo, black & white, c1970s, Gary Kerr, Lithographic Squadron .5) - Photo, black & white, c1960s, unidentified, Lithographic Squadron.1 to .3 – personnel names (less rank) annotated on back. .4 to .5P – no annotationroyal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, litho

Double or exposure containing an AEC Railmotor (with tiger stripes on front) and 4-wheel trailer used on branch lines. Where the strips appear to curve down is a sun visor over the windscreen of the railmotor. The image is double exposed with a E-class 2-4-2 steam locomotive and Tait train on display adjacent "V.R. Cavalcade" Centenary 1854-1954 Exhibition (11-25 Sep 1954) presented a model railway occupying about 1,400 square feet in the Lower Town Hall featuring a number of model railway working scale models. The exhibition also included a display of rolling stock, track, electrical and other railway equipment held at Spencer Street Railway Station.Digital TIFF file Scan of Kopdak 620 black and white negative transparencygeorge coop collection, display, spencer street railway station, v.r. cavalcade, victorian railways centenary 1854-1954 exhibition, aec railmotor

The Small Box Respirator (SBC) was a British gas mask of the First World War and a successor to the Large Box Respirator. In late 1916, the respirator was introduced by the British with the aim to provide reliable protection against chlorine and phosgene gases. The respirator offered a first line of defence against these. The use of mustard gas, was begun by the Germans; a vesicant ("blister agent") that burnt the skin of individuals that were exposed to it. Death rates were high with exposure to both the mixed phosgene, chlorine and mustard gas, however with soldiers having readily available access to the small box respirator, death rates lowered significantly. Light and reasonably fitting, the respirator was a key piece of equipment to protect soldiers on the battlefield.The Small Box Respirator ('SBR') proved to be the most effective gas mask produced during the First World War, and had a number of advantages over its French and German contemporaries.Canvas bag containing Small Box Respirator consisting of a rubberised fabric face mask, connected by a fabric covered rubber hose to a canister made of tin plate containing a chemical absorbent.gas mask, ww1

Six key portable cassette recorder/player with rotary volume control. It can be operated directly from batteries or AC power (cord included). Also has Automatic Recording Level Control Circuitry (ALC), thus no need to adjust volume while recording. In original box with instructions and power cord. (Purchased at Waltons for 29.99).Auto Stop / GAC - logo Top: Condenser mic Rec / Play / Rewind / FF / Eject Left side: Ear O / Remote Mike 00 / Volume Bottom markings: Model No. SW-201 AC: 240V 50HZ 6W DC: 6V (UM - 2x4) Made in Hong Kong Warning: To prevent fire or electrical shock hazard, do not expose this appliance to rain or moisture, do not remove cover, no user serviceable parts inside, refer servicing to qualified service personnel. cassette recorder, gac

Typewriters pre dated computers. This typewriter was possibly used in an office or at home. It was used with an inked tape which may have been only black or had both red and black ink along it. Multiple copies of the material being typed were done using carbon paper inserted between sheets of paper. The original paper was easily identified.Used in the Kiewa Valley.Small grey metal typewriter with deep green key board with gold letters on top.The margin rod is marked in inches and it has keys for pounds, dollars and cents, inches and fractions. The loading of A4 paper is done manually. The keys that hit the paper are stainless steel. The keyboard slopes up to the top which is partially hollow with a gap that exposes the stainless steel keys. The cylinder is at the top and at the back with control knobs on each side. This typewriter has 2 sheets of paper with carbon paper between them to demonstrate how copies were made (but there isn't an inked tape in it so the copies aren't authentic)Centre front: "Royal" Letters of the alphabet on the keys. Centre bottom back: "Royal" and below on a plate: "Built in the British Empire / Protected by American / and Foreign Patents"office. typewriter. royal. carbon paper. decimal currency. office equipment. writing.

Yields information about the type and presentation of books or information folders that were sent to the Electric Supply Company of Victoria about tramway products available on the market and the company the produced them.20 page book with exposed stitching with cream card covers and 16 pages printed in two or more colours on semi gloss paper titled - "Tramway Work Specialities", published by Hadfield's Ltd of Sheffield England. Gives details of the various points crossings, track junctions, layouts, curved rail, car wheels and axles that Hadfield's produced. Each page imaged Publish May 1919, No. 141 Gives company address details. Has stamped on various pages, the Australian or Victorian agents details :"Horrocks, Roxburgh Pty Ltd, Sheffield House 517 - 519 Little Collins St. Melbourne"Stamp with words "Ballarat Tramway Preservation Society Catalogue No. 10" in ink on front cover - top right hand corner and stamp of "Horrocks, Roxburgh Pty Ltd, Sheffield House 517 - 519 Little Collins St. Melbourne" and on other pages within book.trams, tramways, trackwork, points, wheels

The Kew Historical Society's map collection includes a substantial number of real estate subdivision plans, mainly of Kew but also of surrounding suburbs in Melbourne. Most of the subdivision plans date from the 1920s and 1930s when the districts old homes and local farmland were being split up to accommodate residential growth in the postwar period. These early plans were assembled by a local firm, Jas R Mather & McMillan, which had an office in Cotham Road. Many of the plans, and sometimes photos, were annotated by the agents.Subdivision plans are historically important documents used as evidence for the growth of suburbs in Australia. They frequently provide information about when the land was sold as well as evidence relating to surveyors and real estate and financial agents. The numerous subdivision plans in the Kew Historical Society's collection represent working documents, ranging from the initial sketches made in planning a subdivision to printed plans on which auctioneers or agents listed the prices for which individual lots were sold. In a number of cases, the reverse of a subdivision plan in the collection includes a photograph of a house that was also for sale by the agent. These photographs provide significant heritage information relating house design and decoration, fencing and household gardens.The photograph may also be aesthetically significant depending on the importance of the photographic atelier.An elevated, modest weatherboard house, photographed towards the end of the construction phase. The lower section of the weatherboards are exposed and stained. The upper section is rendered with rough-cast. The tiled roof has a single gable that extends over the centrally placed front porch. On the porch, the door and single sidelight are filled with coloured leadlight whereas the casement windows in the front rooms contain plain glass. The leadlight and the wrought iron of the verandah are the only decorative elements of the utilitarian design. The location of the house, which was advertised for sale, has not to date been identified. The real estate photograph is mounted on the reverse of a subdivision plan for the Harvest Home Estate, Kew East.Photographer's stamp, lower right on mount: "A. Aberline, Glenferrie"houses - kew, bungalows - kew, real estate photographs

Lin ONUS (1948-1996) Lin Onus was integral to the recognition of Aboriginal art in the contemporary Australian art landscape. His work expresses the dynamism of living culture; Onus was a prominent figure in renegotiating the history of colonial and Aboriginal Australian. An early influence of this dedication was his father, who was the founder of the Aboriginal Advancement League in Victoria and a maker of artefacts. As a young boy Onus was subsequently exposed to visiting Aboriginal artists and assisted his father in decorating artefacts. His painting Barmah Forest won the Aboriginal Heritage Award in 1994; Onus also received a Member of the Order of Australia “for service to the arts as a painter and sculptor and the other promotion of Aboriginal artists and their work.” (https://www.portjacksonpress.com.au/artists/lin-onus)Unframed colour screenprint with a limited edition of 60.lin onus, frogs, aboriginal, screenprint, printmaking, gippsland campus, print council australia

It is believed that is item was constructed by a veteran in the 1920s. An identical cenotaph to that in Whitehall, London was constructed outside Parliament house in Spring st Melbourne,Australia.This model could be an engineering model for our Spring st version. please contact Caulfield RSL if you have more information. A highly accurate well detailed brass scale model,22 cm high of the original first world war memorial the "Cenotaph" at Whitehall London the UKs national war memorial. An identical cenotaph was constructed outside Parliament house in Spring st Melbourne, Australia.The design is made up of a rectangular base a broad pillar and the cenotaph or coffin on top of the pillar. 3 wreaths also feature, 2 on the narrower sides of the pillar with the years 1914 and 1918 and one wreath on top of the coffin. It has 2 coats of paint on it the second(exposed) being a poor uneven coat of, off white gloss enamel, possibly just house paint.No makers marks or date can be found on the exterior of the model. Visible are the words " THE GLORIOUS DEAD" on each of the narrow sides of the model above each wreath is a year in Roman numerals.One side side for the beggining of world war one "MCMXIV" 1914 and "MCMXIX" 1919 for the official endcenotaph, whitehall