This is Australia’s first monument to the famous Scottish poet Robert Burns and his dog. It was carved from marble in Italy by sculptor John Udny and is inscribed with quotes from the writer himself and features beautiful patterned tiles at its base. This sculpture tells us much of Ballarat’s Scottish history by placing their most revered poet and ballardier of Auld Lang Syne at the corner of Lydiard and Sturt Streets. The local design was carried out by artist John Undy in Carrara marble and placed with this scene. The proud figure of Burns faces west and is accompanied by his collie dog with a book purposely hanging in his hand and a pencil in the other as his constant companions. Burns is mounted on a plinth engraved with some beautiful Burn’s poetry and surrounded by art deco styled tiling and a cast iron palisade. The statue is of aesthetic and historical significance to the people of BallaratCarved marble statue of Scottish poet Robert Burns and his dogIncludes panels with poems and writings by Robert Burns. Plaque reads - Designed by Thomas Thompson Ballarat Sculptured by John Undy, Carrara, Italy.robert burns, scottish poet

The print was created using a traditional woodblock technique. After ink is spread over a rectangular block carved with words and religious images, a thin piece of paper is placed atop the block and a roller is run over it. Then the paper is put aside to dry. Printed from a carved block of wood by a traditional method. Old Tibetan woodblock print featuring Padmasambhava. This woodblock print on hand-made paper depicts Padmasambhava, also known as Guru Rinpoche, revered in Tibet as the second Buddha. Widely recognised as a great Buddhist teacher, he played an important role in spreading Buddhism in Tibet. padmasambhava, tibetan buddhism, woodblock printing

A prayer wheel is used in Tibetan Buddhism for personal worship. Tibetans believe that spinning the prayer wheel which as thousands or millions of mantras inside is equal to saying that many mantras, while being done in a fraction of the time. This helps accumulate merits, purify negative karma and obstacles on the path to enlightenment. This wheel has a hollow metal cylinder attached to a rod handle, made of ivory (with carved elephants), inlaid with coral and turquoise. Inside the cylinder is a tightly wound scroll printed with numerous mantras and wrapped around a spindle. The cylinder is embossed and decorated with inlaid coral and turquoise. A chain with a small weight at the end (made out of copper alloy) is affixed to the cylinder, allowing it to be spun by a slight rotation of the wrist. tibetan buddhism, holy objects, worship devices

This beautiful sculpture by Sotiris Mandalvanos has been created in 1986 and its an artifice from the original statue of Apollo in Olympia GreeceThe sculpture primarily has an artistic and historical value because it is the only known sculpture of Apollo by the only known sculptor migrant of Greek origin in Melbourne.Sculpture of head of Apollo, carved out of jelutong woodBack inscription by hand "SM 1986"apollo, sculpture, wood, greek, god, jelutong

The picture on the sign shows the door surround, St James's Palace. the portcullis decoration on the top right hand corner is very similar to the spandrel stone excavated at Greenwich. Top shows the stone coping at the base of a crenel opening in a crenellated battlement wall, excavated in 1971 in the grand square; the middle shows the window spandrel, possibly from a two light window similar to the reconstructed window excavated in 2005/6 in the Queen Anne car park; and the bottom shows the tudor portcullis heraldic decoration, carved into an arched spandrel stone formng part of an archway over a door. This was excavated in 1971 in the Grand Square. greenwich, stone, museum, chapel

The picture on the sign shows the door surround, St James's Palace. the portcullis decoration on the top right hand corner is very similar to the spandrel stone excavated at Greenwich. Top shows the stone coping at the base of a crenel opening in a crenellated battlement wall, excavated in 1971 in the grand square; the middle shows the window spandrel, possibly from a two light window similar to the reconstructed window excavated in 2005/6 in the Queen Anne car park; and the bottom shows the tudor portcullis heraldic decoration, carved into an arched spandrel stone formng part of an archway over a door. This was excavated in 1971 in the Grand Square. greenwich, stone, museum, chapel

The picture on the sign shows the door surround, St James's Palace. the portcullis decoration on the top right hand corner is very similar to the spandrel stone excavated at Greenwich. Top shows the stone coping at the base of a crenel opening in a crenellated battlement wall, excavated in 1971 in the grand square; the middle shows the window spandrel, possibly from a two light window similar to the reconstructed window excavated in 2005/6 in the Queen Anne car park; and the bottom shows the tudor portcullis heraldic decoration, carved into an arched spandrel stone formng part of an archway over a door. This was excavated in 1971 in the Grand Square. greenwich, stone, museum, chapel

The picture on the sign shows the door surround, St James's Palace. the portcullis decoration on the top right hand corner is very similar to the spandrel stone excavated at Greenwich. Top shows the stone coping at the base of a crenel opening in a crenellated battlement wall, excavated in 1971 in the grand square; the middle shows the window spandrel, possibly from a two light window similar to the reconstructed window excavated in 2005/6 in the Queen Anne car park; and the bottom shows the tudor portcullis heraldic decoration, carved into an arched spandrel stone formng part of an archway over a door. This was excavated in 1971 in the Grand Square. greenwich, stone, museum, chapel

Two examples of improvised surfboards made of solid timber planks, one possibly being an old ironingboard. These illustrate enthusiasm for surfing inspite of lack of ready cash. These hand made surfboards were possibly used by children or young teenagers who had enought ingenuity to enable them to go surfing when money was scarce.Two handmade wooden surfboards with carved and painted emblems at the front; one showing a cat and the other a frog.surfing, surfboards, surfing history

An item from an outstanding and diverse photographic collection, assembled by members of the Christian and Washfold families of Kew.Oval sepia studio portrait of Orlando Henry Beater Christian, dressed in uniform holding a cornet in his right hand. He has centre part, moustache and is seated on an elaborately carved chair. Uniform has epaulettes. orlando henry beater christian, hawthorn band, christian-washfold collection

Traditional hand carved wooden hand towel rail purchased to hang Ale Luibinas traditional hand towel.Hardwood towel rail, the front panel carved in foliate relief

This parasol belonged to Clara Johnstone Miller (nee Bell, 1866-1910). Clara was the only daughter of Mr James Bell, a councillor of the Shire of Leigh (today a part of Golden Plains Shire) and owner of Woolbrook Homestead in Teesdale, near Geelong. In 1888, Clara married prominent businessman, racehorse owner, racing identity and pastoralist Septimus Miller (1854-1925). Septimus was the sixth of seven children born to Henry 'Money' Miller and Eliza Miller (nee Mattinson). 'Money' Miller was a well known financier and politician and reputedly one of Australia's wealthiest people in his time. In 1889, Clara and Septimus moved into the house 'Cantala' in Dandenong Road, Caulfield. They had one child, Gwendoline Stewart Miller, who died in 1902 at the age of thirteen of diabetes - a largely untreatable condition at the time (insulin would not be discovered until 1921). Clara died in 1910, aged only 44. Septimus subsequently married Helen (nee Henderson), with whom he had a son, Ronald (1915-1990). The Millers were buried in the Brighton General Cemetery in a large Gothic-style vault. Upon Clara's death, Septimus sent much of her clothing and Gwendoline's to her mother Mary Bell. Some of these items were passed down to two of Clara's nieces, Miss Mary Bell and Mrs Lois Lillies, who donated them to BHS around 1973.A black silk, wood and ivory handled parasol from circa 1900. The black silk of the parasol body has been treated with a decorative hemstitch towards the lower edge. The handle and frame are made of wood, metal and either ivory or an early plastic designed to mimic ivory. The ivory section is carved with a design reminiscent of a palm tree trunk and finished with a ball. The handle also features a leather looped strap that the hand would pass through to aid holding the parasol.The handle bears an engraved inscription that appears to be 'VML' in a highly florid script. The frame bears the name 'Hartnells'.clara miller, woolbrook, septimus miller, henry 'money' miller, gwendoline miller, cantala, parasols, caulfield, brighton general cemetery

The RDNS Sister is visiting a lady in her own home to take and record her blood pressure reading. The Sister will assess if these readings are within normal limits and relay these readings to the lady's Doctor as necessary. The RDNS uniform worn by the Sister is a white short sleeve blouse under a royal blue V neck tunic style dress and a dark blue cardigan. The Trained nurses (Nurses) of the Melbourne District Nursing Society (MDNS), later known as Royal District Nursing Service (RDNS), visited patients in their home and gave best practice care in many fields of nursing, and to people of many cultures, throughout its 130 years of expansion. Initial visits not only assessed the specific nursing situation but the situation as a whole. Their patients ranged in age from babes, children, adults to the elderly and referrals were taken from Hospitals, General Practitioners and allied Health facilities. Some of the care the RDNS Trained nurses (Sisters) provided is as follows: – Post-Natal care given to mother and babe, Wound Care following various types of surgery, accidents, burns, cancer, leg ulcers etc. Supervising and teaching Diabetic Care, including teaching and supervising people with Diabetes to administer their own Insulin, and administering Insulin to those unable to give their own injections. Administering other injections and setting up weekly medication boxes. The Sisters performed Catheterizations on adults suffering from conditions such as Quadriplegia, Paraplegia, Multiple Sclerosis (MS), Motor Neurone Disease (MND) and Guillan-Barre Syndrome, and when required at school on children for e.g. those with Spina Bifida. The Sisters visited those requiring Cystic Fibrosis support and care; those requiring Haemo-Oncology care, including visiting children at school; those requiring Home Enteral Feeding care, and those requiring IV therapy at home and home Dialysis. Palliative Care was given including pain relief with the use of syringe drivers, personal care as needed, and advice and support to both patient and family. The Sisters provided Stoma management to those needing Urostomy, Ileostomy and Colostomy care and those requiring Continence care. HIV/AIDS nursing care was provided; visits to Homeless Persons were made. Personal care was given to patients ranging in age and with varying mobility problems, such as those with MS, MND, Guillan-Barre Syndrome, Poliomyelitis, Quadriplegia, Paraplegia, Acquired Brain Injury, to those following a Cerebrovascular Accident (Stroke), those with severe Arthritis and those with a form of Dementia. When necessary the elderly were assisted with personal care and advice given on safety factors with the use of hand rails, bath or shower seats, and hand showers. Rehabilitation with an aim towards independence remained at the forefront of the Sister’s minds and when possible using aids and instruction on safe techniques enabled the person to become fully independent. All care included giving advice and support to the patient and their Carers. The Sisters liaised with the persons Doctor, Hospital and allied Health personal when necessary.A black and white photograph showing on the left, a Royal District Nursing Service (RDNS), Sister who has short dark curly hair and who has the ends of a stethoscope in her ears and with her left hand holding the other end below the blood pressure cuff on an elderly lady's extended right arm.. She is looking down at the blood pressure dial which is held in her right hand. The Sister is wearing her RDNS uniform of a white blouse, the peaked collar of which can be seen, under a darker V neck tunic style frock and a dark cardigan. The lady who has short grey curly hair, is watching the procedure. She is wearing a grey short sleeved frock with a broach at its neck and with dark long sleeves seen underneath. The lady is sitting in a patterned padded chair which has a carved wooden top. Long opened curtains with voile curtain in the centre can be see behind her. In the left background, part of a cabinet with ornaments can be seen, and in the left foreground part of a patterned lounge chair can be seen.royal district nursing service, rdns, rdns patient care - blood pressure check

Used by Henry and Martha Sebire at Mont De Lancey . Part of the original furnishings of the dining room. Mass produced. Marie Colling (Sebire) is the great granddaughter of Henry and Martha Sebire.A dark brown wooden carved cased pendulum mantel clock with a highly decorated floral and column transfer design on the hinged glass front and black roman numerals and hands on the white face. Chimes on the hour.Marked inside "Ansonia Clock Co"clocks, mantel clocks

Painted by Eliza Jane Quayle, mother of Gwen Sebire. Put back where it always was in Mind De Lancey.Oil painting of cottage on wood with gold painted frame. Hand-made frame has floral pattern carved on front edge. oil paintings

Appears to be an original piece from Mt Buffalo Chalet. Listed in Draft Inventory of Significant Collection Items. Black and white handcoloured photograph of " Alma Coleman, Mt Buffalo Girl 1930" Image depicts woman on skis in snow, facing camera. Photograph is hand coloured, mounted behind a brown cardboard mount. Framed in a black wooden frame with carved decoration around edge."Alma Coleman / Mt Buffalo Girl 1930 / co founder Edelweiss ski club of Australia - 1934 / co founder Karoonda ski club / Mt Hotham 1967"

Badge of pre curser unit to 5/6 RVRLarge carved wooden badge of the 6th Battalion city of Melbourne Regiment. The badge is painted green and metallic gold on the obvers, has the image of a Kangaroo located above a "6" centrally on a victory green background "City of Melbourne Regiment" and "Semper Paratus are caved into the badge and a Kings crown is located centrally atop of the badge. The reverse has "W McAllum" & " Youngman st. Preston " painted in green and "190549" hand cared into it.The reverse has "W McAllum" & " Youngman st. Preston " painted in green and "190549" hand cared into it.wark vc club, 6 battalion, melbourne rifles

The attached card states - 'Mother's knitting stick'. There is a brass hole one end with four brass nails where the tip of a knitting needle is inserted for support. The curved and fits into a belt or tape around the waist. Knitting was carried out on curved metal needles, one of these needed to be kept rigid by being held between the hand and knitting sheath held at the side of the body either tucked into a belt or held under the armpit. The sheath would allow someone to to knit with one hand whilst performing chores with the other. They also took the weight of the work and stopped stitches from slipping off the bottom of a double ended needle. Many were given as love tokens but there were plenty made by men for their daughters or other close family members.An antique curved carved wooden knitting stick or treen Knitting Sheath for hand knitters. It is approximately 23cm (9 inches) long with simple carving on one side of M H R in large letters as well as a nine pointed star next to them. There is a brass hole one end with four brass nails where the tip of a knitting needle is inserted for support. The curved end fits into a belt or tape round the waist. 'M H R' and a 'nine pointed star' is carved into the curved part of the stick . There is an attached card - 'Grandma's (crossed out) Mother's knitting stick. When using four needles the "working" one goes into the hole at the brass end of stick. Curved end fits into belt or tape round waist'accessories, knitting equipment, knitting

From the home of Mr and Mrs Parker. belonged to Mr Parker senior.Ornate carved dark timber mantle pendulum clock with brass clock face surround. Has a white dial with black roman numerals and black metal hands. The Ansonia Clock Co. Manufacturers USA Trademark A is printed on the face. It has an ornate brass pendulum and the internal workings are visible. The very ornately embossed in gold decorated glass front opens. There are two spirit plumb levels inside, one is aluminium metal and is attached to the wall, the other is brass with Wm Hunt Level Co with a triangle on top stamped on it. There is a brass key No.7 with two holes on the top of the winder handle. The Ansonia Clock Co. Manufacturers USA Trademark A. printed on the dial. Wm Hunt Level Co. stamped on the level.clocks, timepieces, mantle clocks, clock components, clock keys

Donated by Clive ManlyCream bone hand fan with each spoke distinctively carved. fans, folding fans, hand fans

Presented by the Victorian Tramway Football Association to Mr Norman Charles Boucher, Victorian Railways, Tramway Motorman for his long service to the Association. Dated 18 March 1947. Hand made with ink and water colours, with VFTA logo. Signed by C A Peterson as President, L Montgomery as Hon. Treasurer and R Hodder as Secretary. See item 7056i3.pdf for his story prepared by Noelle Jones. See item 7057 for a football team photograph which included Mr Boucher.Demonstrates a hand made illustrated Life Membership certificate.Wooden framed illustrated certificate glazed secured with nails on rear. Hand made with ink and colour wash. Has two screws in the top corners and a section of string for hanging. The wood frame is machined carved.sports, vfta, football, certificates, vr trams, motormen, n c boucher

The wooden pattern was possibly made for casting a part for Craftman Marine, makers of engines for boats and other machines. It is part of a set that is stored in a strong wooden crate. It was used at Briggs’ Brass Foundry for making sand casts. The traditional craft of sand casting is over 2000 years old. The handcrafted process produces brass and copper alloy goods that are well suited to marine use; bells, boat hooks, cowls, propellers, handles, lids, rowlocks, hooks, letters, bolts, rail holders, brackets, deck plates, flanges, rudder guides, portholes and covers. Briggs’ Bronze mixture is a copper-based alloy made from local ingots of copper, tin, zinc and lead in carefully measured quantities. The finished product is non-ferrous and can last indefinitely. The crate of patterns was donated by the Briggs family in the early years of Flagstaff Hill, along with other related items such as brassware, tools and machinery. The donated items were displayed in a simulated Brass Foundry in the Village along with other working crafts, trades and services found in a Maritime town. The items were on show from the completion of the building in 1986 until 1994 when the building was repurposed. The patterns represent the trades of foundering and metalwork, both supporting maritime industries such as shipwrights and boatbuilders. Farmers, manufacturers and other local industries also needed the castings made by foundries. The Brass Foundry included a historic Cornish chimney set up as a working model, to tell the story of smelted metal heated in furnaces then be poured into the sand moulds. This chimney was made from specially curved bricks and is now about two-thirds of its full height when originally located at the Grassmere Cheese factory. The craft of sand-casting from carved wooden patterns to create metal is an example of skills from the past that are still used today. The foundry pattern set is significant for its association with brass foundries locally and generally in coastal areas of Victoria. Marine industries such as ship and boat building rely on good quality castings for their machinery, equipment and fittings. Briggs Brass was especially formulated using non-ferrous metals to ensure their longevity. The patterns are associated with the long-running firm Briggs Brass Foundry that specialised in cast goods for the marine industry, ready to supply the needs for once-off or mass-produced items. Their products would have been fitted to sail and steam vessels along coastal Victoria including Warrnambool. Briggs Marine was also a bell-founder specialist and is also associated with the Schomberg Bell at Flagstaff Hill, having restored it to is former state as a fine example of the bell from a luxury migrant vessel from the mid-19th century. Pattern; rectangular wooden block with a corner cut diagonally. A five-sided shape has been carved into the centre, with one side curved inwards and slightly shallower than the other sides. The cut-out area is painted black. Three holes are drilled in the cut-out side to align the pattern with another piece of work. A wooden slat is fixed across the diagonal side. The back of the pattern has a handwritten inscription, possibly by two writers. The pattern is part of a set of foundry patterns from Briggs Brass Foundry and is connected to Craftman Marine.In black handwriting: "1 # H AL" Handwritten in a different hand: "CRAFTMAN MARINE" Written the the first hand: BRIGGS" (or "BRICK")flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, briggs' bronze, traditional method, trade, sand cast, cast, brass alloy, copper alloy, pattern, mould, foundry, brass foundry, metal foundry, casting, sand mould, sand casting, marine equipment, marine tools, marine fittings, copper tin zinc lead, non-ferrous, non-corrosive, brassware, metalware, foundering, metalwork, maritime, bell founders, ship chandlers, marine products, biggs, briggs family, herbert harrison briggs, h h briggs, george edward briggs, cyril falkiner mckinnon briggs, cyril briggs, briggs & son brass foundry, h h briggs & sons foundry, briggs marine, alliance casting & engineering solutions, grassmere cheese factory, cornish chimney, curved bricks, collingwood, moorabbin, collingwood foundry, moorabbin foundry, 1912, craftman marine, craftsman marine

Two Hand made wooden staves, approximately 1800cm long. One staff has a plaited wicker trim around the handle. The foot is marked with circular stripes. The other staff has a carved handle with carved circular rings. This item was formerly #28staves, staff, handmade weapon

Braille hand frames and styluses were the primary way to produce Braille for over a century. The stylus was used to make a separate indentation for each dot, and the hand frame to keep dots within the same cell. Braille rows are produced from right to left. The process was very time consuming. Volunteer transcribers for the library could take an average of ½ hour to produce one page of Braille using this method. For example: “Oliver Twist” required approximately 600 sheets equating to 300 hours of work! This wooden slate, which was used to make the system portable, served as a firm base needed to sustain puncture pressure. The frame can also be slotted into both sides of the slate, thereby ensuring that the lines of Braille were straight across the page. The metal clasp at the top of the frame held the wooden which kept paper from slipping. In this example, the Rules of Membership for the Victorian Braille Writers were attached to the board.1 wooden back board with metal hand frame and stylus156 carved into wooden framebraille equipment, victorian association of braille writers