Set of five pamphlets of an industrial or public relations nature issued during the early to mid 1980's. .1 - "The Wage Freeze" - foolscap printed on yellow paper, issued by the ATMOEA Vic Branch May 1983. .2 - "Public Transport: You pay more for less" - change of services, staff cuts, safety, Fuel conservation and what should be done - issued by the North Fitzroy Tramways Depot Committee and notes a meeting on Monday 17 September - (1984 by calendar check) - foolscap printed both sides on white paper. .3 - "$440,000 tram stripped for spare parts" - tram Z137, stripped - duplicated on blue quarto paper, issued by "concerned tramway workers" . Notes the tram had entered service in 1980 and had been stored for some time. .4 - "Open letter to passengers of Melbourne Tramway System" - complaining about the shortage of crews at Kew Depot - and asking people to register a complaint with the Minister Peter Spyker. Issued by "concerned Kew tram workers" - printed on blue A4 paper. .5 - "They are going to sell off Public Transport:" - ATMOEA - signed by Jim Harper - about the forthcoming 1 Oct. 1988 state election, asking readers to put the Liberals last. Printed on yellow A4 paper both sides.Has in to the top right hand corner in ink "72Drv Sun"trams, tramways, mta, unions, atmoea, wages, public transport, kew depot, north fitzroy depot, tramcars, tram 137

Historical information: this medallion has historical details on three fronts. Firstly the Villiers & Heytesbury Agricultural Association. This association began with the first meeting held on May 17th 1853 at Woodford. The minutes of that meeting read “That in the opinion of this meeting, the formation of an agricultural association would be of great benefit to persons in this district engaged in farming and pastoral pursuits. It initially embraced the following: ploughing, agricultural produce, machines and implements, and livestock of all descriptions. The first show was held at Warrnambool on April 10th 1855 on a green bounded by Fairy, Henna, and Koroit Streets. It was held there until 1875 when it moved to the present Showgrounds site in Koroit Street. At the 37th Annual show in 1890 Warrnambool held its first Grand National Show, being granted by the Chamber of Agriculture in turn, in Victoria. It became known as the Warrnambool Agricultural Society in 1911. Secondly the winner, Mr Hugh Lennon. He was one of the most successful innovators and manufacturers of agricultural implements in early Australia. Although born in Ireland, he served an apprenticeship in Scotland in mechanical engineering. The Lennon plough became known Australia wide. For many years he operated his business at the northern of Elizabeth Street in Melbourne. He was active in local affairs. He died in 1886 at the age of 52. Thirdly, Stokes and Martin. Thomas Stokes came to Australia in the 1850’s and established a successful business at Mincing Lane Melbourne, manufacturing buttons, medals and tokens. Martin joined the partnership in 1873, which lasted until a disastrous fire in 1893. The business was renamed Stokes & Sons Pty Ltd and it became a public company in 1962. It is currently situated at Ringwood in the business of spare parts for electrical equipment The Villiers and Heytesbury Agricultural Association was a significant event and organisation within the Western District over a large number of years. It was one of the earliest organisations in the district and is testament to its importance to the agricultural, social, and cultural life of the district. It is significant that this particular medallion was awarded to an innovator in the ploughing industry and that it was made by a company which is still in business 130 years later. Circular copper medallion cast with Villiers & Heytesbury Agricultural Assoctn around edge with winner and event details engraved in centre. The reverse is cast with horse, cow and sheep standing above wheat sheaf and farm implements. The edge of the medallion is plain.Villiers & Heytesbury Agricultl Assoctn around rim. 1st Prize awarded to Hugh Lennon for double furrow plough, Warrnambool Oct 19 1880. Stokes & Martin Melbourne in small lettering on the reverse.warrnambool, villiers & heytesbury, hugh lennon, stokes & martin, lennon plow, lennon plough

The Fred Rochow Railways Collection incorporates photos related to the operation of the Wodonga Railway Station including different types of trains and railways staff C. 1930 – 1990. It was donated to the Wodonga Historical Society by Fred Rochow, a railwayman who spent many years based in Wodonga. He joined the Victorian Railways on 17th June l947 and retired in 1988. For some time, he was a member of the Australian Federated Union of Locomotive Enginemen and served a term as a member of the Trades Hall Council. He had an extensive knowledge of the struggles that took place to achieve better conditions for railway workers. Fred worked for many years as a fireman and then worked his way up the ranks to driver, experiencing many changes from the days of steam locomotives through to diesel trains, locomotives and even the modern XPT train. He worked throughout Victoria at different stages of his career, with his final working years focused on the northeast of Victoria and the Albury to Melbourne line. After his retirement, Fred continued to share his love of steam miniature trains with the community. Cudgewa Line -The Cudgewa railway line opened in stages between 1889 and 1921. The first section from Wodonga to Huon opened on 10 September 1889. It was extended to Bolga on 18 July 1890, Tallangatta on 24 July 1891, Shelley on 13 June 1916 (the highest station in Victoria), Beetomba on 10 April 1919 and Cudgewa on 5 May 1921. In 1919, the line was used to carry materials for the construction of Hume Weir, and three years later a spur line connecting Ebden to the weir was opened. In the 1960s, Cudgewa became the railhead of materials for the Snowy Mountains Scheme. The last passenger service from Wodonga to Tallangatta ran on 30 September 1961 The turntable and passenger platform at Cudgewa were abolished in 1976.This collection has local and statewide significance as it captures images of trains, locomotives and personnel who operated the railway services in Wodonga and throughout Northeast Victoria. The railways played a critical role in opening up Victoria and connecting Australia for trade, business, social communication and transport.Historical Steam locomotive on journey to Cudgewa. Locomotive K184 leading with Driver Noel Strauss and Fireman Barrows. Locomotive K186 is the Banker with Driver Doug West. A banker is railway locomotive that temporarily assists a train that requires additional power or traction to climb a gradient. K Class Locomotives - One of VR's most successful classes of loco they were built over a 24 year period. A general purpose, light lines loco the K class had a very long career in all sorts of service from branch line passenger and goods work to pilot and banker duties and roadside mainline service. The K class is credited with working virtually every line in the VR system and hauling almost every kind of train. The majority of the class lasted into the 60's. K 184 and K186 were built by the Victorian Railways' Newport Workshops in 1945 to the successful K-class 2-8-0 locomotive design for branch-line work. K184 entered service on 9 January 1946. K186 entered service on 19 March 1946. K184 was used on heritage services with Steamrail Victoria through the 1970s. It was withdrawn from service in 1980 and is stored at Newport Workshops. and is now used as a source of spare parts; other Steamrail K Class locomotives occasionally wear its number plates and headlight number boards. K186 was scrapped on 25 October 1967.railways wodonga, fred rochow, cudgewa station, high country railway line, k class locomotives

This is a set of 19 photographs of the four types of printing presses in Lithographic Squadron at the Army Survey Regiment, Bendigo in the late 1980s. The Original Heidelberg Printing Press features in photograph 6188.1P. It was a robust and well-made single colour lithographic offset press that was in service at the Army Svy Regt for decades. Its primary use was for initial training and rapid response tasks, such as single pass overprints over existing print stock. See item 6062.4P for more information and photographs of the Heidelberg press. The Komori Newkoni Printing Press features in photographs 6188.2P to 6188.6P. It was a four-colour offset press in service at the Army Svy Regt from 1975 to the late 1980s. Intended improvements to productivity were not realised as it was unreliable, was very cramped between decks and there were safety concerns for the operators. See item 6063.5P for more information and photographs of the Komori press. The Planeta Polygraph Printing Press features in photographs 6188.7P to 6188.11P. It was a two-colour offset press in service from 1976 to 1994 and was mainly used to print Naval and medium format RAAF charts. It was more reliable than the Komori Printing Press however procurement was difficult when spare parts were required. It was replaced by the larger format Roland 8047B four colour Printing Press. See item 6064.9P for more information and photographs of the Planeta press. The Ultra-MAN-III Printing Presses feature in photograph 6188.12P to 6188.19P. The two presses were a standard map size format and were introduced in June 1962 as two-colour offset presses with improved safety features. Productivity greatly improved with the addition of a third colour deck in 1968, as the two presses could print a five-colour standard topographic map in two rather than the three passes before the upgrade. See item 6065.10P for more information and photographs of the Ultra-MAN-III presses. They were replaced with a single Heidelberg Speedmaster 102 five colour Printing Press in 1990. See item 6136.30P for more information and photographs of the Speedmaster press.This is a set of 19 photographs of the four types of printing presses in Lithographic Squadron at the Army Survey Regiment, Bendigo in the late 1980s. The photographs were on 35mm negative film and scanned at 96 dpi. They are part of the Army Survey Regiment’s Collection. .1) - Photo, colour, c1980s, Original Heidelberg Printing Press, Print technician Jeff Willey on right, Lithographic Squadron. .2) to .6) - Photo, colour, c1980s, Komori Newkoni Printing Press, Lithographic Squadron. .7) to .11) - Photo, colour, c1980s, Planeta Polygraph Printing Press, Lithographic Squadron. .12) to .19) - Photo, colour, c1980s, Ultra-MAN-III Printing Presses, Lithographic Squadron.There are no annotations.royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, litho

Extract from The Spectator of June 12, 1946: "From the Queensland 'Methodist Times'. Dreams do come true. At any rate, that is what the Rev. Cliff Lanham believes, who after the lapse of several years finds that his early dream of a Flying Patrol for the Inland is now an actuality. The Methodist Inland Mission Board has purchased from the Disposals Commission of the R.A.A.F. a De Haviland Fox Moth Biplane. Indeed, two machines have been bought, but one will be broken up for spare parts. This 'new angel of the air' is fitted with a 130 h.p. engine and possesses a cruising speed of 100 miles per hour. The petrol consumption is only that of a big six-cylinder car—18 miles per gallon. In addition to the pilot there is room for three passengers, and a stretcher is installed whereby urgent cases of sickness or accident can be flown to the nearest hospital. In this machine, Mr Lanham proposes to cover the whole of S. W. Queensland and a portion of the Northern Territory from his headquarters at Mt Isa. It takes little imagination to realise what a boon the 'flying parson' will be to those of the great outback." …. "Before [Mr Lanham] inaugurated the scheme [the idea of a flying parson] he spent his first furlough from inland mission work (and incidentally £60) learning to fly. 'In a month,' he says whimsically, 'I was a pilot of sorts.' Mr Lanham is a son of the Church. His parents were staunch Methodists, and their home offered generous hospitality to mininsters and preachers. His brother, the Rev. Percy Lanham, M.A., died in Libya when on active service as a chaplain. His widowed mother must be proud of her tall, stalwart son, whom the Church now sends forth on his flying mission for the Lord. May he ever be wafted through inland skies on two wings and a prayer." It is of interest to note that although Cliff Lanham's brother, Percy, is listed in the Methodist Church of Australasia's Ministerial Index (9th Edition, Revised to 1961) Cliff Lanham himself is not listed as either active or deceased.Three B&W identical photographs of Lanham standing next to a Methodist Inland Mission bi-plane. Lanham and an unidentified man are holding a stretcher between them with a boy of about 10-11 on it. They seem to be exiting the plane. The original photograph F69-1 is a 110x65 mm Kodak print; the other two are 195x145 mm enlargements. Lanham is wearing a white shirt and grey trousers, the other person is wearing a safari helmet.All three photos identify "Rev. Cliff Lanham" on the back. They seem to have been originally used or intended for use by The Spectator.lanham, cliff, queensland, methodist inland mission, flying parson

Black and white photograph. Machine in building. Partially unpacked machine parts in wood crate (front and top removed). Inscriptions on back: 'MP 209-B,50,13' , 'Cohn Bros No.4, spares and loose parts' typed on back. Stamps on back 'Butlers (Australia) Pty Ltd, 18-28 Allen St, Pyrmont, Sydney' (oval rubber red stamp), History of Object: Previous Acc. No. 'MP 209'. 'Received 14 Sept. 1950' (rectangular rubber purple stamp), 'Royal Historical Society of Victoria, Bendigo Branch' (circular rubber blue stamp).topic, objects, machine, 2000.525.01, 2000.526.01, 2000.527.01, 2000.530.01, 2000.531.01, 2000.532.01, 2000.533.01

This vaporiser is enclosed in a portable black cylindrical bakelite carry case with moulded handle, woven fabric strap and single steel latch. The item comprises a three-chambered vaporiser, an assortment of attachments including black ribbed rubber tubing, light brown rubber rebreather bag, facemask, black rubber mask harness, Connell pharyngeal airway with connector, an attachment for an endotracheal or nasal tube, as well as spare thermometer and other parts.Stencilled in white paint on the outside top lid is 'THIS SIDE UP / WITH CARE / SEE INSTRUCTIONS / INSIDE LID'. Serial number is inscribed on metal plate inside the lid and printed in white on the inside lid is 'IMPORTANT / The Oxford Vaporiser is a scientific apparatus'vaporiser, oxford, anaesthetic, portable, bakelite, connell pharyngeal airway, heated vapor, endotracheal, nasal, rebreather bag, thermometer, facemask

Ferdinand Von Mueller came to Australia at the age of 22 arriving 15/12/1847 with his two sisters in Adelaide. He started work as an assistant chemist and in his spare time investigated the local vegetation. In 1852 he moved to Melbourne. From 1853 - 1896 when he died, he was the Victorian Government Botanist and Director of the Melbourne Botanic Gardens. He went on a series of expeditions to parts of Victoria including Mount Buffalo and Wilson's Promontory. He travelled all over Australia in various expiditions. In 1863 he was engaged to Euphemia Henderson for 6 months. Euphemia was a wildflower artist and painted bunches of flowers for Mueller. They allocated specimens at Phillip Island (1863) - one named Nematolepis euphemiae F Muell was named for her. Euphemia's sister was Gergianna who married John David McHaffie of Phillip Island. Euphemia lived with the McHaffies on Phillip Island. Her Wildflower art has been adapted for a range of plates and mugs produced in partnership with the Royal Botanic Gardens and Maxwell & Williams, called the Euphemia Henderson Collection.Large Black & White photograph of grave and monument of Ferdinand Von Mueller in St Kilda Cemetery.Handwritten on the bottom of the photograph: "Grave/Monument St Kilda Cemetery. Ferdinand Von Mueller. Photographer: Alan West Oct. 1994.ferdinand von mueller, baron ferdinand von mueller, miss euphemia henderson, georgianna mchaffie, john david mchaffie, alan west

Long khaki coloured heavy coat. Thick, sharp angled collars. Each collar has a split half way down and a small metallic hoop attached to the lower middle section of the high parts of the collars. Each shoulder has a lapel that is fastened with a plastic button. The coat is double breasted. There are three grey buttons for use on the right and three grey buttons for show on the left. There is also a spare button on the inside left front section near the breast area. There are two pockets on the front that are angled with the highest point near the centre and the lowest point near the hips. There is a small section of spare fabric attached with two small plastic buttons to the inner left of the jacket near the breast. The arms, underarm and upper back section contains an inside khaki coloured lining of thinner, most likely cotton fabric. Attached to this at the base of the neck is a satin or synthetic fabric label with inscriptions in black ink. Above this there is a thin strip of fabric attached at either short end to use for hanging the coat on a hook. At the back of the coat there is a single pleat stretching from the base of the neck to the base of the coat. Approximately half way down the pleat there is a split in the fabric that is fastened with two plastic buttons. At the waist there are two fabric flaps that fasten together at the back with three buttons.The label attached on the inside at the base of the neck reads: “KINDRED MANUFACTURING / PTY LTD. / QLD / 1083” There is then a broad arrow followed by: “B406-66-093-1812 / SIZE 109 / TO FIT CHEST 100cm / NAME.................../ SERVICE No......................”

Used to make casting moulds for the high pressure main Otway Supply System pipeline. Was used in conjunction with scour valve mould, Wf mould and valve stem mould in the 1980sUsed to manufacture spare parts for the main Otway pipeline2 wooden boxes each contain the mould for casting valves for wtaermains pipelines. Moulds lined with green coloured sealantwatermains written in black ink on outside of boxotway region, water supply, pipelines, valves

Used to make casting moulds for the Otway Water Supply System in the 1980s. Used in conjunction with scour valve mould, Wf mould and high pressure scour valve mould (casting) watermainsUsed in the manufacture of spare parts for the Otway Water Supply pipelinevalve stem casting mould in plywood boxwatermains in black textaotway region, water supply, pipelines

This spinning wheel originates from New Zealand; however, it has no distinguishing features relating to its creator such as an inscription, so its exact maker is not known. Gill Stange remembers buying the wheel on Bridge Road in Richmond, approximately 30 years ago. Gill had joined her local Spinners and Weavers Guild after the Ash Wednesday bushfires of 1983. She was a then resident of Mount Macedon and lost everything in the fires. Moving to Melbourne to get away from the scene of much pain, Gill was also in need of a new hobby to help occupy her mind. That is when spinning and weaving entered her life. The local Spinners and Weavers Guild was a great support network for her and with their recommendation, she purchased her own spinning wheel. Her passion was started, and the wheel was to become a treasured item in Gill’s home. She had several spinning wheels within her possession over the years, however, this wheel was her first and always her favourite. When the time came for Gill to downsize, there was simply no longer room for her spinning wheel. This is when she decided to donate the wheel to the National Wool Museum. Gill remembers one highlight was weaving a tablecloth from a traditional German design. It took her two years to complete, with Gill spinning all the wool herself on this wheel. The tablecloth won the first prize in the Melbourne Show in 1987. Gill also used the wheel to teach programs to school children on how to spin and knit wool. She would take the easily transported little wheel, and its accompanying seat, with her to schools. Its small size enabled her to teach children to knit and spin, bringing others the joy that spinning had brought her. Not just limited to schools, Gill also taught programs with the wheel here at the National Wool Museum. It is a fitting home for the wheel, which Gill donated to the National Wool Museum in 2021.Dark varnished wood in a Castle style spinning wheel. The wheel has 8 small spokes which meet a thick outside rim. The outside rim has four golden disc weights on the bottom edge, to aid in the turning of the wheel. The spinning wheel has four legs of turned wood giving a sculptural form, a design pattern which is continued throughout. The wheel has a single medium sized foot pedal. This pedal is well worn with varnish missing from years of use. The wheel is completed with its accompanying chair. Made of the same dark varnished wood, its legs are also of turned wood, continuing the design pattern and uniting the two objects. The chair is very simple outside of the legs, with a medium size base and a thin backrest ending in a rounded head. The chair’s varnish is also starting to fade from years of use. The chair is small, designed to keep the spinning wheel operator at the appropriate height when spinning on the equally small and compact Castle style spinning wheel. Additional parts were donated with the Spinning Wheel. - 3 x Lazy Kates - Spare Maiden. - 450mm Niddy Noddy - Steel teeth brushspinning wool, spinning wheel, ash wednesday, mount macedon, textile production

White catalogue with blue printing for a sale on the 14th April, 1992 on account of Carlton and United Breweries Ltd, Abbotsford. For sale was pumps, valves, components and spares, New electrical fittings and parts, and general equipment and spares.business, auctioneers, j h curnow & son pty ltd, ian dyett collection - auction catalogue - carlton and united breweries ltd, malcolm mackinnon, j h curnow & son p/l, occupational health and safety act 1985, noel dyett, fred dyett, ian dyett, bolton bros p/l

Completed depot shed with trams being assembled from parts railed to Geelong from Duncan and Fraser, coachbuilders, Adelaide, and trucks supplied by the Brush Electrical Engineering Company of Loughborough, England. Chimney to the left is part of the Melbourne Electric Supply Company's coal-fired power station at the SW corner of Corio Tce. and Yarra St. 1911Yields information on the early development of Geelong Tramways infrastructure.Black and white print on paper.Plate 3-1 Spare written in ink on the back of the photograph.geelong tramway depot shed, tramway assembly, duncan and fraser coachbuilders, brush electrical engineering company, geelong mesco power station

This image is one of a series of photographs taken by Melbourne based photographers Stevenson and McNicoll who visited Bacchus Marsh and its nearby districts between September and November 1883. William Marshall opened his new premises in Main Street in June 1869. In the following November he opened a wheelwright shop adjacent to his smithy. Mr T. Carlton was the wheelwright. The Marshall Blacksmith building was located next to the ANA Hall in Main Street. It was demolished in 1910 to make way for a new building known as the Chambers Building. In the nineteenth and early twentieth centuries, the blacksmith played an essential role in the functioning of the whole community. Before the industrialisation of manufacturing, all metal objects, including farm implements, building requirements and domestic utensils were made by hand. As mechanisation of industry increased, the smith commonly performed the role of farrier in the times when horse power was pivotal to all aspects of society. Complementing this work, the forge was often allied with a wheelwright's shop. These premises also acted as a meeting place for the men of the town, where news was shared and friendships forged. Small sepia 'carte de viste' style unframed photograph on card with gold border framing photograph. Housed in the album, 'Photographs of Bacchus Marsh and District in 1883 by Stevenson and McNicoll'. William Marshall opened his new premises in June 1869, and in the following November opened a wheelwright shop adjacent to his smithy. Mr T. Carlton was the wheelwright. The photograph shows a brick building with two gables and two large doors, indicating that a second workshop has been added to the original building. Parts of a picket fence and two cartwheels lean against the wall. Three men stand at the front, two wearing the distinctive farrier’s apron slit between the knees. The third man is wearing more formal clothing. Two of the men hold the reins of two horses. A picket fence runs along the front of a spare block at the side of the building. The deep gutter is straddled by two crossing points. Printed On the front: Stevenson & McNicoll. Photo. 108 Elizabeth St. Melbourne. COPIES CAN BE OBTAINED AT ANY TIME. On the back: LIGHT & TRUTH inscribed on a banner surmounted by a representation of the rising sun. Copies of this Portrait can be had at any time by sending the Name and Post Office Money Order or Stamps for the amount of order to STEVENSON & McNICOLL LATE BENSON & STEVENSON, Photographers. 108 Elizabeth Street, MELBOURNE. blacksmiths, shops bacchus marsh vic., william marshall 1839-1914

Completed depot shed with trams being assembled from parts railed to Geelong from Duncan and Fraser, coachbuilders, Adelaide, and trucks supplied by the Brush Electrical Engineering Company of Loughborough, England. Chimney to the left is part of the Melbourne Electric Supply Company's coal-fired power station at the SW corner of Corio Tce. and Yarra St. 1911Yields information regarding the early development of tramway infrastructure in Geelong.Black and white print on paperPlate 3-2 Spare written in ink on the back of the photograph.geelong tramway depot shed, duncan and fraser, brush electrical engineering company, mesco power station

A technical manual produced by the Royal Australian Air Forceroyal australian air force, engineering publication, australian air publication, 4.0 in non return valve

Set of four colour prints of an Ex Victorian Railways bogie tram body at Sloan NSW. Photo by Norm Cross, printed on AGFA paper. Photo dated 1/1/1994. Advised by Tony Smith - 29/3/2017 "The tram in question is VR 39. It was one of the last 4 trams disposed of from Elwood depot in 1959 after the system closed. They were purchased complete by Upton's machinery dealers of Corowa. The other cars were 29, 33 & 37. He then stripped them and sold the bodies. When we obtained VR 41 in 1977 we immediately went searching for other bodies that might yield parts to help in rebuilding 41. We located 37 on the outskirts of Wangaratta and it yielded many body items including a complete drivers bulkhead that was used to replace the one in VR 41 that had been cut out with an axle by the previous owner. You may also recall that we obtained 3 complete broad gauge 77e trucks from Upton's (they had cut up the other 5 bogies years previous). These 77E trucks are now under the Christchurch Brill tram with the 3rd as a spare as we were able to obtain standard gauge 77e's when we acquired L 105 for dismantling."Each photo has written in ink on the rear "Body of VR tram # @ Sloan NSW 1 Jan 1994, photo by Norm Cross".trams, tramways, vr trams, sale of trams, scrapped trams, tram 39