This miner’s pick was of the type used to extract limestone at the Warrnambool limestone quarries, mainly for buildings and walls. This pick cut the sides and the top of the block and then it was levered off with a crowbar at an angle of about 30° to 40°. These blocks were then reduced to the required size using cross cut saws. There were about 12 limestone quarries operating in Warrnambool in the 19th century and limestone was extensively quarried for about 85 years to the 1930s when quarrying ceased. Today there has been a small revival in the Warrnambool area in the use of limestone blocks for building. Warrnambool also once had several bluestone quarries on the outskirts of the town. This miner’s pick has a wooden handle with rounded sides tapering to a wider end. The wood is weather-worn and split in places, especially at the top end. The pick is metal with a curved shape that tapers to a point at one end. The metal near the other end has a cavity into which is inserted the wider end of the wooden handle. limestone quarries in warrnambool, quarrying in warrnambool, warrnambool history

This miner’s pick was of the type used to extract limestone at the Warrnambool limestone quarries, mainly for buildings and walls. This pick cut the sides and across the top of the block and then the block was levered off the strata using a crowbar at an angle of 30° or 40°. These blocks were then reduced to the required size using cross-cut saws. There were about 12 limestone quarries operating in Warrnambool in the 19th century and limestone was extensively quarried for about 85 years to the 1930s when the quarrying ceased. Today there has been a small revival in the use of limestone blocks for building. Warrnambool also once had several bluestone quarries on the outskirts of the town. This miner’s pick is of considerable interest as an example of the type used in quarrying limestone in Warrnambool . Quarrying was once an important industry in Warrnambool. This miner’s pick has a short wooden handle with a metal stud inserted at the bottom end. The handle is rounded on the sides and tapers slightly from the top to the bottom. The metal pick has a curved shape with one blunt end and one sharp end. It has a cavity in the end nearest the blunt end and the wooden handle slots into this. The pick is painted black, green and orange, perhaps for display purposes. A handwritten information tag is attached to the handle. quarrying in warrnambool, limestone quarries in warrnambool

This saw could have been used in industry or in a home situation. It was made by the H. Disston & Sons of U.S.A. This company was established in 1850 by Henry Disston and by the 20th century it was the largest maker of hand saws in the world. The hand saws used today differ little from this early model. This saw is retained as a good example of a hand tool that is over 100 years old. This hand saw has a triangular-shaped metal blade with a serrated edge on the straight side of the blade The handle is wooden with five metal screws. There is a metal plaque containing the name and emblem of the manufacturer. The saw is a little rusty and stained.‘H. Disston & Sons Philada’ ‘T.E.G.’ household tools, history of warrnambool, wood saw

This saw was made by H. Disston and Sons, a Philadelphia, U.S.A. company founded in 1850 by Henry Disston. It became the largest saw maker in the world in the 20th century. This saw could have been used for industrial or for household purposes. The hand saw used today features the same basic pattern as this one. This saw has no known local provenance but is retained as an example of a hand saw that is over 100 years old. This saw has a triangular-shaped metal blade with a serrated edge on the straight side. The blade has details of the manufacturer imprinted into the metal but this is mostly indecipherable. The wooden handle has four wooden screws and a fern pattern etched into one side. It also has a metal plaque with the name and emblem of the maker. The saw has some staining.‘H. Disston & Sons Philada’household tools, history of warrnambool, wood saw

The handle of this hammer looks to be home-made and to have been used as a household tool. Most homes still today include a small hammer as a household item. The provenance of this hammer is unclear but it possible that it is the hammer found at ‘Guthrie’, a house in Merri Street, Warrnambool that was demolished. ‘Guthrie’ was the home of the Dickson family, prominent in Warrnambool business circles. James Dickson, with his friend John Cramond, established a store in Warrnambool in the mid 19th century and this department store, known as Cramond and Dickson, was a prominent business in Warrnambool until its closure in 1973. James Dickson’s son and his family lived at ‘Guthrie’ and the hammer may have belonged to the Dicksons or another family connected to that property. This hammer has a metal head and a wooden handle. The top of the handle has a metal screw inserted and small slivers of the wood are missing. The end of the metal section is much worn.household tools, history of warrnambool

The handle of this hammer looks to be home-made and to have been used as a household tool. Most homes still today include a small hammer as a household item. The provenance of this hammer is unclear but it possible that it is the hammer found at ‘Guthrie’, a house in Merri Street, Warrnambool that was demolished. ‘Guthrie’ was the home of the Dickson family, prominent in Warrnambool business circles. James Dickson, with his friend John Cramond, established a store in Warrnambool in the mid 19th century and this department store, known as Cramond and Dickson, was a prominent business in Warrnambool until its closure in 1973. James Dickson’s son and his family lived at ‘Guthrie’ and the hammer may have belonged to the Dicksons or another family connected to that property. This hammer has a metal head and a wooden handle. The top of the handle has a metal screw inserted and small slivers of the wood are missing. The end of the metal section is much worn.household tools, history of warrnambool, hammer

This jewellery lathe (minus its rubber belt) came from the Warrnambool jewellery store of Michael Salamy and his son, Edward. The business was in two locations - in Timor Street, opposite the old Post Office, and at 179 Liebig Street. Michael Salamy erected two new buildings at 179 and 181 Liebig Street and the Salamy business was then headed by the son, Edward who was born in 1903 and died in 1977. The jewellery store was closed when Edward retired and Clancey Brothers men's store took over the building at 179 Liebig Street in 1966. Bill Clancey found the jewellery lathe in this building and donated it to the Historical Society. This lathe is of considerable interest as it comes from the prominent 20th century Warrnambool jewellery business of M.Salamy and Son. It is also an interesting memento of a 20th century industrial tool. This is a metal tool with several wheels connected with wing nuts. The large wheel has a wooden handle. A rubber belt connecting two of the wheels is missing. '0865 Panton Maker Glasgow'michael salamy and son, jewelers, warrnambool

This tool, along with many other vintage tools in the collection of the Warrnambool and District Historical Society, is believed to have belonged to Henry Phillips, a19th century Warrnambool identity. English-born Henry Phillips (1821-1896) came with his wife Elizabeth to Australia in 1849 and lived in Port Fairy for some years. In 1865 Phillips formed a partnership with Christopher Beattie in the Warrnambool undertaking business of Beattie and Phillips. This was a major business in Warrnambool, continuing after the deaths of Phillips and Beattie until the year 2000. Henry Phillips was involved in the management of the Warrnambool Mechanics’ Institute and the Art Gallery. This tool is of interest as an example of a 19th century tool and as a memento of a prominent Warrnambool businessman of the 19th century, Henry Phillips. This is a planing tool with a rectangular-shaped wooden body and two round polished wooden handles at either end. The wooden piece is curved on the base. A metal plate with a curved end is inserted in an opening on the top of the wooden piece and extends down to a small slit at the base. Metal screws keep the handles and the metal blade in place. vintage carpentry tools, henry phillips, warrnambool, history of warrnambool

This item is one of several in a collection of tools that are believed to have been owned by the Warrnambool carpenter and businessman, Henry Phillips. The needles are bag needles, used with leather or string to sew up and enclose hessian bags etc. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy. In 1865 Henry formed a partnership with Christopher Beattie to establish the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute.This is a wooden case, elliptical in shape, with a detachable lid. The case is pointed at both ends. The lid is bound at one end with several strands of string. The case contains twelve metal needles of varying lengths and eye hole sizes. Two of the needles have curved ends and several have flattened middle sections. The needles are much rusted and the case is stained.Made in Englandvintage tools, henry phillips

This tool is one of several in a collection that is believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some years in Port Fairy and in 1865 Henry formed a partnership with Christopher Beattie to establish the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute.This item is retained as an example of a vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips.This is a large wood plane tool. It is rectangular in shape and has a centre piece gouged out and a metal blade protected by a wooden piece inserted into the top hole and protruding at the base of the body to form a planing tool. The metal blade has a straight edge. A wooden handle at the end of the tool body has been broken off but is retained with the tool. vintage tools, henry phillips, warrnambool, history of warrnambool

This chisel is one of several tools that are believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some years in Port Fairy. In 1865 Henry formed a partnership with Christopher Beattie to establish the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute. This tool has a wooden handle indented in the middle to give a firmer grasp and a metal blade inserted at the end of the handle to form a chiselling straight edge. The metal blade is held at the handle end by a band of metal. The wood in the handle has been gouged out and broken at the top end on both sides. Traces of paint are on the handle and the blade is rusted.vintage tools, henry phillips, warrnambool, history of warrnambool

This tool is one of several tools which are believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy. In 1865 Henry formed a partnership with Christopher Beattie and established the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute. This tool is of interest as an example of a home-made vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips. This is a small mallet with a wooden handle and a cylindrical-shaped piece of wood inserted into the handle to form a mallet head. The head section is reinforced with a piece of curved thin metal. The ends of the mallet head are very worn. This is a home-made tool. vintage tools, henry phillips, warrnambool, history of warrnambool

This item is one of several tools that are believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy. In 1865 Henry formed a partnership with Christopher Beattie and established the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute.This tool is retained as an example of a vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips.This is a chisel with a wooden handle that is in two segments and has a groove in the centre. The end of the handle has a cylindrical piece of tin attached. The chisel inserted into the handle is metal with a straight edge. The metal is a little rusty and there are traces of paint on the handle. vintage tools, henry phillips, warrnambool, history of warrnambool

This hammer, along with several other tools, is believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy. In 1865 Henry formed a partnership with Christopher Beattie and established the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the death of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute. This item is retained as an example of a vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips.This is a metal hammer with a wooden handle. The hammer has a rounded end. The handle has split slightly in some areas and has some cream paint spots. vintage tools, henry phillips, warrnambool

This tool, with several others in a collection, is believed to have belonged to the Warrnambool carpenter, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy and in 1865 Henry formed a partnership with Christopher Beattie to establish the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute. This item is of interest as a good example of a vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips. This is a metal hammer head inserted into a wooden handle. The hammer head is flattened in the centre.vintage tools, henry philips, warrnambool, history of warrnambool

This tool is one of several tools that are believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some years in Port Fairy. In 1865 Henry formed a partnership with Christopher Beattie and established the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute. This item is of some interest as a good example of a vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips.This is a metal rod in a u-bend shape with a wooden handle in the middle of the bend and another circular wooden handle at one end of the metal rod. There is a metal piece at the other end of the rod for the insertion of a drill and a turning stud for clamping the drill in place.vintage tools, henry phillips, warrnambool, history of warrnambool

This tool is one of a collection of tools that are believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy and came to Warrnambool where Henry formed a partnership with Christopher Beattie to establish the undertaking firm of Beattie and Phillips. This business continued after the deaths of the two founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved with the management of the Mechanics Institute. This tool is of interest, firstly because it is a good example of a vintage tool and secondly because it is a memento of the Warrnambool carpenter and businessman, Henry Phillips. This is a small hand drill with a metal piece containing a composite material handle at one end (for one hand) and a metal piece at the other end for the insertion of a drill. Attached to the main metal piece is a circular piece of metal with spokes and a wooden turning handle (for the other hand). The handle is attached to the circular spool by a metal screw. vintage tools, henry phillips, warrnambool, history of warrnambool

This item is one of several tools that are believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived in Port Fairy for some years. In 1865 Henry formed a partnership with Christopher Beattie and established the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute. This item is of interest as an example of a vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips.This is a piece of wood shaped to make two handles at the ends and a middle piece that has a metal blade inserted at the top. The metal blade has two projecting ends that fit through the middle wooden piece. When held upside down this item is used as a planing tool. vintage tools, henry phillips

These items are among several tools that are believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy. In 1865 Henry formed a partnership with Christopher Beattie and established the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute. These nine tools are small wooden planes, similar in size and design. In each tool the main wooden section is rectangular in shape with an additional wooden piece attached to one side. In each a metal blade has been inserted at an angle into a slot on top of the main wooden piece and a small wooden piece rests on the blade. The blade protrudes at the base of the main wooden piece to form a planing mechanism.vintage tools, henry phillips, warrnambool

This rake is an adaptation of an old pitch fork for a specific purpose, perhaps for breaking up clods of dirt or doing some deep raking. This rake has no known local provenance but is kept for display purposes as an interesting example of an adaptation of an agricultural tool for a specific purpose. This is an old pitch fork which has been made into a rake or a scarifier by bending back the ends of the three metal prongs of the fork (producing prongs of an uneven length). The prongs are attached by a metal band to a wooden handle.vintage agricultural implements, history of warrnambool, pitch fork

This is a manual hedge trimmer which has a push pull action. It is not a very common garden tool possibly a lot slower to use than clippers. It dates from mid 20th century.This is quite a rare tool.This tool is consists of a metal bar with a row of prongs attached . A blade on one end is moved along the length of the metal bar thereby trimming the bush. There is a wooden handle attached to the metal bar and a wooden ball and spring on the righthand side.Code Half Time. Made in England Pat App No 16418/49warrnambool, tool, hedgetrimmer, code halftime

Chain link saw with eyelet ends, also two wooden handles complete with leather carry pouchSE Norris, 1939military equipment, saw, folding saw

140.1 Green wooden carry box with hinged lid and metal latch. 140.2 Metal device with spring loaded handle, rollers and pointer assembly and graduations. Box has brass plate with tension scale for various aircraft types, tool has 76 stamped on the handle.cable tension tool, tool

This shovel was purchased at the clearing sale here on the Aerodrome after the war.Steel square mouth shovel with one short piece wooden handleMintern, Made by Mintern products Richmond Victoriashovel, spade, schultz,

Item used in early wood constructionWooden and metal construction designed to be hand held. Tool has folding metal hand supports both front and rear. There is a fine scraping blade extending from the underside of the tool. This blade has an adjustable dept screw attachment to set the amount of waste to be removed from the surface of the timber.J.S. NO 8plane, wood, passchendaele barracks trust

The entrenching tool fits inside item 3005 for attachment to basic webbing. See also Reg No 3005. Item issued to Peter Ball 3796117, refer Cat No 4704Entrenching tool consisting of a wooden handle with a fold open spade & pick. A threaded metal section allows either spade or pick to be locked for use.Peter BALLbasic webbing, military

Item belonged to Maxwell Lennox Matheson No 418447 RAAF. Refer Cat No 1959 for his service record.Cleaning kit for a Vickers Machine Gun 1) Leather "wallet" for the kit 2) Brass inspection mirror, with cap, for the use of checking barrels. 3) Oil can tin 4) Oil brush, set into the brass cap of oil can 5) Gauge tension, with flat blade one end and bullet shape other end 6) Screwdriver, flat blade, wooden handle 7) Leather pouch with strap1) Front marked "303 INCH VICKERS" 5) Marked "0 - 20" scale 7) Front marked "D.D 303 VICKERS GUN E.B", rear marked "MADE BY RE BOWDEN & SON LTD. (indistinguishable) ST, NEWTOWN NSW 1942" handcrafts - leatherwork, metalcraft brassware, trades-tools, military history, vickers

Items were part of a film developing kit used by Jack Grinton who served as No 1043, 38th Batt AIF 1916-19. This was his second outfit. During his service he took hundreds of photos and developed many in England. Refer Cat No 1280 for service details. Refer 1248.2, 1317P, 1320P.Tools used in photo developing. .1 Device with wooden handle .2 Wooden handle with metal point .3 Silver coloured metal spool .4 Black metal spool .5 Small metal rodphotography, accessories

.1) Native Headman's axe, from Mt Hagen area New Guinea. One end has a blade of shaped green stone. The other end timber, originally had a diamond shaped hole, now broken. The handle stem & 2 blades are held together with intricate bamboo weaving & adhesive. .2) The plain wooden handle had been sawn off some time ago, it was glued on for display.Written on side 1: Headman's Axe, Mt Hagen ethnographic material - tools + implements, military history - souvenirs

Tobacco cutters were important tools for pipe smokers until self-made or manufactured cigarettes began to dominate the tobacco sales market from the 1920s. This item is a link to a previously common means of consuming tobacco.Tobacco cutters were used at both J Ward and the Aradale complex in Ararat. They were used to cut tobacco, which was then apportioned out to patients for their consumption.Metal tobacco cutter (guillotine style), mounted on wooden base, with wooden striker plate.A. McMILLAN inscribed on striker plate.tobacco, cutter