The story of 90 years of wool classing between father & son begins in 1936, when a young boy by the name of Stanley James Hucker walked through the doors of the Gordon Technical School in Geelong. Born in 1921, Stanley was 15 years of age when he began his 3-year course in Wool Classing. 30 years later, Stanley’s second son Denis completed the same 3-year wool classing course. Beginning in 1966, Denis attended the same Gordon Technical School and walked the same halls as his father before him. Stanley finished his course in 1938. He went back to the family farm in Lake Bolac for a brief period before enrolling in the Second World War. At the completion of the war, Stanley returned home and married before gaining a soldier settler allotment, north of Willaura. This enabled Stan to use his wool classing knowledge. He ran between 1,500 and 2,000 sheep for many years, while his wool classer stencil also allowed him to go out and class at various sheds around the area. He held his stencil from 1938 until he retired at the age of 60 in 1981. On retirement, his second son Denis was working in the district, managing a local property while also leasing land himself. Upon his father’s retirement, Denis had the opportunity to lease his father’s farm, an opportunity he could not refuse. Denis had finished his wool classing course at the Gordon Technical School in 1968, graduating dux of his class. He began working with a local contractor and started classing wool in his team. Denis gained a great deal of experience working as part of this team in big sheds of up to 8 stands servicing between 10 & 20,000 sheep. It was not all smooth sailing for Denis however, and he soon learnt an important lesson. Class wool the way you’re taught, don’t listen to the owner standing over your shoulder. At a clip of Corriedales near Casterton, Denis was pushing too many fleeces into the line of fine wool. This resulted in a notice from the Australian Wool Exchange (AWEX) “mixing counts too much, submit three clips for inspection”. Denis was able to submit 3 clips with no further complaints, however, this proved a valuable lesson he would never forget over his long career classing wool. In the early 1980s, when Denis was leasing two properties including his father’s, things were going well until drought struck. February 1983 was the date of the Ash Wednesday bushfires, and saw Melbourne have three days over 40 °C for only the second time on record. This period saw Denis give away farming, turning towards contracting work instead. After the difficult times of the early 1980s, the next two decades were a good time for the sheep industry. 15 micron wool was selling for prices between 4 to 5,000 cents per kilo, double what you’d expect for the same wool in 2022. In 1995 a single bale of wool sold for a million dollars. This was a good time for Denis too. His contracting work saw him employing local shearers and shed staff. His team was involved with the shearing and classing of more than 130,000 sheep. After 20 years of contracting, it was time for Denis to transition into the next phase of his life. He gave up independent contracting, preferring instead to return to being a member of someone else’s team. In 2018, having completed 50 years of wool classing, it was time to call it a day and retire completely. At the annual Gordon Wool School Old Students Association dinner held in 2018, Denis was presented with his 50 years as a registered wool classer stencil awarded by the Australian Wool Exchange (AWEX). This is a rare honour achieved by few. As of February 2020, a total of 430 wool classers had achieved this 50-year milestone. For Denis however, his proudest achievement is achieving 90 years of wool classing with his father. The National Wool Museum is proud to share the collection of objects gained from 90 years in the wool classing industry by Stanley and Denis. This ranges from Stanley’s first stencil and Wool Sample book, started when he first attended the Gordon in 1936. The collection concludes 90 years later with Denis’ 50 years of wool classing Stencil. The collection contains many more objects, all telling the story of these 90 years, and the hard work invested by this dedicated father and son duo.Large black bound book with ribbon for fastening containing 12 double-sided blue pages. Pages have several samples of shorn wool mounted and annotated to include information such as specific breeding, shearing faults, and geographical area. The book concludes with four pages without wool samples. Two of these pages relate to plans for a shearing shed and other industry related structures. The final two-pages relate to the anatomy of a sheep. Wool sample books were constructed by Wool Classing students at the Gordon Technical School as examples of what to look for when classing wool. The students were tasked with constructing these books with samples they retrieved themselves from several different farms and animals. The book would serve as a reference point for the wool classers throughout their years in the field, it was always on hand to refresh knowledge. This book was constructed by Stanley Hucker over his schooling at the Gordon between 1936 and 1938Front Cover. Handwritten, White Ink "Stanley Hucker / Samples"90 years wool classing between father & son, wool classing, gordon technical school

Ghost Blanket IV won the 'Award for Excellence' at Ozquilt Network's biennial juried exhibition Art Quilt Australia for 2021. The quilt presented with the Award for Excellence is acquired into the National Wool Museum's Collection dating back to 2000 with the art quilt "Earth Blanket". Artist statement: In "Ghost Blanket IV", woven checked blankets are deconstructed and reimagined to create an appliquéd work with the feel of lace. It celebrates the natural colours of alpaca fleece and the qualities of felted, woven fabric.Woven black white and grey checked design appliqued onto silk organza.ozquilt, quilt, art quilt, wool

Norma Dessent (the donor) was cleaning out her Mother-in-law Amy Dessent’s home, after she passed away in 1995. She came across a collection of gunny sacks for chicken feed, potatoes, and flour. Norma gave the bags to her good friend Beryl Andersen, thinking she might be able to make use of the material in her quilting. Many years later in 2001, Beryl gave Norma this quilt made in a wagga style out of the bags. This was both a great surprise and a great delight for Norma. Amy Dessent was a housewife. Her chickens were her friends, keeping her company as she worked in her renowned garden and while she cooked and maintained a beautiful home. Typically, Amy would have a dozen chickens clucking around at a time. In the style of the time, everything was kept for a possible repurposing later in life, such as these gunny sacks. The Chicken Feed Wagga was created in Ballarat by Mrs Beryl Andersen. Beryl was the inaugural president of the Hamilton Quilters Guild and is a well-known quilter. Perhaps her best-known work was the “Quilt for Hope”, a living memorial for victims of institutional church-related sexual abuse. More information about this quilt can be found on the following link. https://www.nationalquiltregister.org.au/quilts/quilt-of-hope/). The wool blanket used as a backing belonged to Beryl’s mother. Beryl’s mother married in 1930 and the blanket is thought to have been a present from this wedding, making the blanket close to a century old. Norma donated the quilt to the National Wool Museum in 2021 as a result of downsizing. She no longer had room for the quilt to hang on her wall. Before downsizing, the quilt had hung in the entryway to her home for the last two decades.Wagga style quilt made with a appliqué top layer of gunny sacks that once held chicken feed, flour, and potatoes. The insulating internal material is not known. The backing fabric is made from a cream woollen blanket. The edges are bound with a material of a red and white plaid. The gunny sacks are quilted together with a machine stitch of red thread. The sacks contain imagery pertaining to their previous use. Some sacks have an image of a chicken applied with blue, red, or green ink. Other sacks contain imagery of potatoes. While other sacks contain information “Minimum Crude Protein 14%, Minimum Crude Fat 3%, Maximum Crude Fibre 7%”. One of the sacks shows a handwritten price for a bag of chicken feed in a red ink.Numerous. See multimediaquilts, wagga, gunny sacks, upcycle

The Excelsior Woollen and Worsted Mills were controlled by Godfrey Hirst & Co. Pty. Ltd. The Excelsior name originated from the union in the one enterprise of two of the earliest mills established in Victoria, the Old Victorian Mill, and the Old Barwon Mill. Godfrey Hirst combined his expertise with the capital of Charles Shannon to purchase the Barwon Mill in 1890 and the Victorian Mill in 1899. They commenced production of high-quality flannels in readiness for an anticipated lifting of tariff barriers in 1901, the year of federation. These were the first flannels to be produced in Australia rather than imported from England. In April 1912 the No.2 Excelsior Mill burnt down during the installation of electricity and was rebuilt. The No.1 Excelsior Mill was closed in 1930, with most hands moving to the No.2 Mill. In 1966 the firm changed ownership and became a subsidiary of the McKendrick family and commenced manufacturing of tufted carpets. Godfrey Hirst has since emerged as Australia’s leading manufacturer of tufted carpets. It has also expanded into hard flooring, including timber, laminate, and other surfaces. In 2018, the Godfrey Hirst business was acquired by Mohawk Industries, the world’s largest flooring company. Brown blanket featuring a design of four lines of cream, and a single line of orange, spanning the blanket vertically and horizontally, to form a plaid pattern. At the vertical ends, the blanket ends in a fringe.Label. Stitched. "The Atlantic Rug / Excelsior/ Guaranteed Product / Australian Manufacture"godfrey hirst & co. pty. ltd., excelsior mill, the atlantic rug

Jane McGrath made this quilt 30 years ago from a tartan fabric sample book (c.1990). It was one of her first quilts. Jane was inspired to quilt by her mother Shirley Critchley. Jane recalls her mother being a very talented quilter, with one example being the “Unpicked Jumper Wagga” which can be found within the National Wool Museum’s Collection (REG 8283). Shirley taught Jane the basics in quilting and assisted her in preparing this quilt. The quilt is backed with material from disused woollen skirts. Jane could not recall what material was used for the internal insulating fabric. Jane donated the Tartan Fabric Sample Quilt to the National Wool Museum in 2021. The quilt had been languishing in her cupboard for many years and had found its way to the op-shop pile, as her children had no desire to inherit her quilts. The top layer of the quilt consists of five distinct rows of tartan samples appliqued together. The rows of tartan samples are broken with a boarder of white, grey, and brown fabric which runs in parallel lines. This fabric is also used to bind the quilt together at the edges. The internal insulating fabric of the quilt is not known. The backing fabric is a grey coloured wool originating from disused skirts. The Tartan samples contain stripes of varying width and colour. The samples have been arranged so that the stripes run diagonal on the quilt. Many different colours have been used. The predominant colours are red and black, with lessening amounts of blue, yellow, white, green, and grey featuring. quilts, tartan fabric samples, upcycle, shirley critchley/jane mcgrath collection

This quilt was created by Ms Shirley Critchley, c.1960. it was made in a wagga style from unpicked knitted jumpers that Shirley would repurpose. Some of these jumpers were from her daughters out growing their garments, while others were from jumpers Shirley would find at opportunity stores. One of Shirley’s daughters, Jane McGrath, followed in her mother’s footsteps and begun quilting with Shirley’s guidance. One of Jane’s first quilts, the “Tartan Fabric Sample Quilt” is located within the National Wool Museum’s collection (REG 8282). Multicoloured wagga style quilt. The quilt’s top layer is made from unpicked knitted woollen jumpers. These jumpers are in a variety of colours including yellow, blue, green, and red. Some blocks are a single colour, while others have been knitted with a different secondary colour such as grey or white to give noise. The quilt has an unknown insulating fabric. It shares its backing fabric with the material used to bind the edges together. This material is a woollen blanket in a tartan pattern of a blue background with green and red lines. The quilt is sized to suit a single bed. quilts, wagga, upcycle, shirley critchley/jane mcgrath collection, woollen jumpers

This traditional wagga blanket was made by Mrs Eileen Pattle between 1942 and 1950. The wagga was used as everyday bedding, as Eileen and her husband had very few possessions. They boarded with a man who they called “Old Harry” in Footscray. Old Harry had recently lost his wife and looked after the young couple well. They could stay with him and use his house as their own, and all that Old Harry asked for in return was for Eileen to cook him one good meal a day. The blanket was given to Mrs Beverley (Bev) Maguire, the daughter of Eileen, when she and her husband went camping one winter. Her husband was a “mad” fisherman and on one trip on which Bev joined him, her father offered the couple his old tent, that had a wall missing, and the wagga. The wagga was much appreciated as when the couple woke in the countryside, it was freezing, and they could see snow through the missing tent wall. From then on, the tent and the wagga were theirs. The wagga saw many more camping trips until the arrival of Bev’s “lovely new lightweight and down filled sleeping bag”. The wagga was made with a “make do, waste not, want not” attitude. The wagga started as an army issued blanket. The front layer has clothing and panels of mismatched material which has been added to over time. This includes an overcoat, two knitted garments, a panel from a skirt, and a panel from Old Harry’s Trousers. It also includes a man’s sleeveless knitted vest, and a knitted pram blanket. This is all stitched together with string, and the odd button. Bev said she would love to unpick the quilt to see what else is hiding inside but has resisted the urge to do so. All these layers have made the blanket incredibly warm, and heavy. The wagga has been within Bev’s family since creation and comes into the National Wool Museum Collection after serving the family well. It was used to keep everyone warm when not camping over many a winter’s night. Beverley is now getting on in years and donated the Wagga to the National Wool Museum in 2021. Her family referred to the wagga as a “collection of rags”, indicating to her that they did not wish to inherit the blanket. The wagga started as an army issue blanket. It has been made by stitching the khaki army blanket onto a hessian rear. The front layer has clothing and panels of mismatched material. This includes an overcoat, two knitted garments, a panel from a skirt, and a panel from Old Harry’s Trousers. It also includes a man’s sleeveless knitted vest, and a knitted pram blanket. This is all stitched together with string, and the odd button. It is thought that other materials are hiding within the layers of this wagga, however, uncovering these layers would involve unpicking the quilt. The wagga is 1360 x 1880mm, sized to suit a double bed. It is a heavy blanket, originating from all its panels of mismatched reused clothing. The wagga is well worn but has lasted almost 80 years. It has holes that have been lovingly re-stitched.wagga, quilt, upcycle

This Remington No.12 typewriter is of the typebar, front-strike class. It was made by the Remington Typewriter Company of Ilion, New York, U.S.A. in about 1925. The Model No. 12 was introduced in 1922 and was one of the first 'visible writer' machines, in which the typed characters were visible to the operator. Previous models were of the upstrike class in which the characters were typed on the underside of the platen. To see what had been typed the operator had to raise the platen, meaning the typist was typing blind much of the time. This machine was used by Margaret Ganly née Burn in the 1930s. It was purchased for her by one of the sons of William Pride, a famous saddle maker in Geelong, William was Margaret’s grandfather. The typewriter was donated with original sales receipt and servicing tools. Margaret worked at Dennys for 7 years during the 1930s. The typewriter is accompanied with a story written by Margaret about her time working at the company. Margret married Jack Ganly, a fellow employee of Dennys. The Ganly name was well known within Dennys, with three generations of the Ganly family working at the company. WORKING CONDITIONS & OFFICE WORK DUTIES. Written by Margaret Burn in 2021. Worked at Dennys Lascelles in the 1930s. In the 1930s coming out of the Depression, jobs were hard to come by and had to be clung to by efficiency and subserviency. There was no union to protect workers – bosses could be tough and rough. Dennys Lascelles revolved around fortnightly wool sales in the “season” – September to May. Sale day was always a day of suppressed excitement. Preparation from a clerical point of view was complete and we now awaited the aftermath of the actual wool auction. The building teemed with people. There were country people down to see their wool sold, buyers of many nationalities, or from the big cities, who were coming in and out of the building all day. Their role was to inspect the acres of wool bales displayed on the show floors; however, caterers were present to feed clients, and there was plenty of social interactions on top of business. The office staff did not go home but waited until the first figures came back from the wool sales and the machines went in to action, both human and mechanical, preparing the invoices for the buyers’ firms. This comprised of lists of lot numbers, weights, prices per lb., and the total prices paid. A lot of this was done by old-school typewriters, making this work a big, heavy, tiring job. Before the finished lists could be dispatched, they were collated on an “abstract”. The lists had to balance with the catalogue from which the invoices had been prepared. This never happened automatically. All the paperwork had to be split up amongst pairs of workers and checked until discrepancies were found. This would happen until midnight but occasionally went until 2 or 3 am. Once complete, the invoices could then be rushed off to the buyers’ firms usually in Melbourne, and hire cars took the staff home. It was back on the job the next morning, usually around 8.30. The office hours varied according to the size of the sale and work involved. Some days started as early as 8 and could finish around 5.30. The second phase of work began with the account sales to be prepared for the sellers of the wool. These detailed all the weights, descriptions of wool, brands, and prices. One Sales account could have multitudes of lot numbers, all needing to be individually described. Various charges needed to be deducted such as finance for woolpacks, extra stock, or farmers who were given a loan to live on during the season. Details of how payment was to be made was also noted, whether the seller was to be paid by cheque, to a bank, or credited to their account with the company (which often left the seller still in debt). For a couple of months in the winter, things were quieter when staff took holidays and were sometimes given afternoons off. But there were still weekly skin sales and stock sales around the state. The annual end of June figures to be prepared for a big company like Dennys with branches all around the state also kept the staff busy. In good years there was sometimes a bonus. On sale days there was a bar open for the clients and wool buyers. This added to the excitement for the young girls, who were strictly barred from using it, but somehow managed to sneak a gin and tonic. This is how I had my first ever, before the evening meal. There was also the romantic notion in some minds, with all the influx of males, that some of us might end up on a wealthy station, or be noticed by an exotic buyer. To my knowledge, this never happened at Dennys Lascelles Limited. Group staff photo at Dennys Lascelles Limited. Margaret Burn. Age 18 or 19. Jack Ganly (Margaret’s future husband). 22.The typewriter has a black painted metal frame. The top section of the typewriter consists of a cylindrical platen on a carriage featuring plated metal fittings. A curved folding paper guide sits behind the platen and moves on the horizontal axis when the user types on the keyboard. A horizontal semicircular type basket with typebar links the top section to the lower keyboard. The ink ribbon is carried between two spools on a horizontal axis, one on each side of the type-basket. At the rear, a paper tray features gold lettering which reads ‘Remington’. At the front, a four-row QWERTY keyboard is found with 42-character keys total. 'SHIFT LOCK' and 'SHIFT KEY' are to the left of the keyboard, 'BACK SPACER' and 'SHIFT KEY' to the right. All keys are circular, white with black lettering. At the top of the keyboard are five circular red keys with the numbers 1-5 displayed behind their respective keys. A Spacebar is found along the front of the keyboard. The typewriter is accompanied by a cardboard box. This box contains the original sales receipt, on blue paper with grey lead handwriting. It also contains spare parts, a spare ribbon stretched between two spools, and cleaning tools such as brushes of differing sizes. Serial Number. Engraved. "LX45395" Gold lettering. Paper tray. “Remington” Gold Lettering. Behind keyboard. “Made in Ilion, New York, U.S.A. Gold Lettering. Mirrored both sides of type-basket. “12”remington, dennys lascelles ltd, worker conditions 1930s

Letter of Reference for Miss Margaret Burn detailing her work as a bookkeeper, machine operator, typist, and stenographer over seven years at Dennys Lascelles Limited. The letter details her leaving the company as she married in 1939. In the same year, Ms Burn returned to the office owing to the shortage of staff caused by various employees being called away for Military Training. Included in the staff called away for military training was her newlywed husband, Mr Jack Ganly. A fellow employee of Dennys, the Ganly name was well known within the company, with three generations of the Ganly family working at Dennys. Margaret worked at Dennys for 7 years during the 1930s. The Letter of Reference is accompanied with a story written by Margaret about her time working at the company. WORKING CONDITIONS & OFFICE WORK DUTIES. Written by Margaret Burn in 2021. Worked at Dennys Lascelles in the 1930s. In the 1930s coming out of the Depression, jobs were hard to come by and had to be clung to by efficiency and subserviency. There was no union to protect workers – bosses could be tough and rough. Dennys Lascelles revolved around fortnightly wool sales in the “season” – September to May. Sale day was always a day of suppressed excitement. Preparation from a clerical point of view was complete and we now awaited the aftermath of the actual wool auction. The building teemed with people. There were country people down to see their wool sold, buyers of many nationalities, or from the big cities, who were coming in and out of the building all day. Their role was to inspect the acres of wool bales displayed on the show floors; however, caterers were present to feed clients, and there was plenty of social interactions on top of business. The office staff did not go home but waited until the first figures came back from the wool sales and the machines went in to action, both human and mechanical, preparing the invoices for the buyers’ firms. This comprised of lists of lot numbers, weights, prices per lb., and the total prices paid. A lot of this was done by old-school typewriters, making this work a big, heavy, tiring job. Before the finished lists could be dispatched, they were collated on an “abstract”. The lists had to balance with the catalogue from which the invoices had been prepared. This never happened automatically. All the paperwork had to be split up amongst pairs of workers and checked until discrepancies were found. This would happen until midnight but occasionally went until 2 or 3 am. Once complete, the invoices could then be rushed off to the buyers’ firms usually in Melbourne, and hire cars took the staff home. It was back on the job the next morning, usually around 8.30. The office hours varied according to the size of the sale and work involved. Some days started as early as 8 and could finish around 5.30. The second phase of work began with the account sales to be prepared for the sellers of the wool. These detailed all the weights, descriptions of wool, brands, and prices. One Sales account could have multitudes of lot numbers, all needing to be individually described. Various charges needed to be deducted such as finance for woolpacks, extra stock, or farmers who were given a loan to live on during the season. Details of how payment was to be made was also noted, whether the seller was to be paid by cheque, to a bank, or credited to their account with the company (which often left the seller still in debt). For a couple of months in the winter, things were quieter when staff took holidays and were sometimes given afternoons off. But there were still weekly skin sales and stock sales around the state. The annual end of June figures to be prepared for a big company like Dennys with branches all around the state also kept the staff busy. In good years there was sometimes a bonus. On sale days there was a bar open for the clients and wool buyers. This added to the excitement for the young girls, who were strictly barred from using it, but somehow managed to sneak a gin and tonic. This is how I had my first ever, before the evening meal. There was also the romantic notion in some minds, with all the influx of males, that some of us might end up on a wealthy station, or be noticed by an exotic buyer. To my knowledge, this never happened at Dennys Lascelles Limited. Group staff photo at Dennys Lascelles Limited. Margaret Burn. Age 18 or 19. Jack Ganly (Margaret’s future husband). 22. Sheet of paper shorter in length than A4 size, creamed with age. Paper has a header for Dennys, Lascelles Limited’s Head Office at 32 Moorabool Street, Geelong. Body of paper is made up of 3 paragraphs in a typewritten message of black ink with subheadings highlighted with a red underline. The text is finished with a signature at the bottom of the paper. Paper is accompanied by its original envelope. Envelope has typewritten text in black ink with a red underline located at the centre. It also has return to sender instructions to Dennys, Lascelles Limited in the lower left-hand corner.Typewritten text, black and red ink. Multiple. See multimediadennys lascelles ltd, worker conditions 1930s, letter of reference

With more and more woolsheds being connected to power lines, the need for electric shearing gear markedly increased from the 1960s onwards. The greater economy made electric gear an attractive proposition to many graziers. Requiring only an electric shearing motor, for small and medium scale operations, electric shearing motors were a more economical way of shearing a wool clip. The other option for graziers was Overhead shearing gear, which also required an Engine to provide shared power to a row of shearing stations. Still working, this Sunbeam Electric Shearing Motor – Heavy Duty Model, features a slow speed motor totally enclosed for protection against dust and insects. The full bearing down tube is easily removed and stored to be out of the way when not in use (not pictured). Providing 0.5 hp, which is twice the power ever needed for shearing sheep, this buffer allows for fluctuations in voltages that can occur in rural districts. Inventor Frederick Wolseley made the world's first commercially successful power-shearing system in Australia in 1888. US company Cooper, which had been founded in 1843 as a maker of sheep dip, began selling Wolseley equipment in the USA in 1895. The Chicago Flexible Shaft Company successfully entered the power-shearing market a few years later and entered into a joint venture with Cooper. It set up a branch in Sydney and sold shearing sets, and engines to power them, into the Australian market. In 1921 the US parent company, realising it needed to make products whose sales were not as seasonal as those of shearing equipment, made its first household appliances and branded them Sunbeam. In 1933, changes in exchange rates and taxes led the company to manufacture engines and shearing equipment in Australia via subsidiary Cooper Engineering, which changed its name to Sunbeam in 1946. Although most Australians know of this company as a major manufacturer of household appliances, its rural division flourished and retained the Sunbeam name for shearing equipment even after it was taken over by New Zealand company Tru-Test in 2001. This 0.5 horsepower vertical brushed motor air-cooled engine was designed to drive a single shearing plant. From the central cylinder which features a yellow “Sunbeam” sticker, a grey 240v power lead can be found on the left-hand side. A blue capacitor is located next to this power lead. Below, two legs extend and meet to form a foot which is fastened to a wall. On the right-hand side of the engine, a specification plate is located on the central cylinder. A yellow directional arrow sticker is located on the rotating section of the engine below the specification plate (location for photography, this section is designed to rotate and hence this sticker is not fixed in this location). At the rear of the cylinder, a plastic cap with small air cut outs protects the air-cooled engine from contaminants. At the front of the engine, the location for securing the bearing down tube is located. On the right-hand side of the lock for the bearing down tube is the handle, to which a string is often attached for switching the motor on and off by a shearer bent at the waist (not pictured). Sticker. Gold writing. Front of shearing motor “Sunbeam” Plate. Inscribed. Side of shearing motor. “Sunbeam / SHEARING MOTOR / MADE IN AUSTRALIA / 0.5 H.P. / 220/240 V / 1 PHASE A.C. / 4.0 AMPS / 50 C/S. / CONT. RTG. / 1425 R.P.M. / CLASS A INSUL / NO. J244560 / TYPE: NSB5C2/49." sheep sheering, shearing equipment, sunbeam, electric shearing motor

Cooper S.E. Ball Bearing Grinder made and guaranteed by Sunbeam Corporation Limited. Grinders like this example have been made the same since the early 1900s, with this grinder thought to have been produced in the 1960s. It is belt driven, with the other end of the belt being attached to an engine; the same engine that would have powered the overhead shearing equipment in shearing sheds. It was common for shearing teams to bring their own equipment, especially pre-1960 as most shearing sheds were not connected to power, and shearers preferred to work with their own equipment. The engines that powered the shears and grinder were typically fuelled with kerosene or petrol. The large circular disks are attached to the bolt that protrudes from the grinder and fastened tightly with a nut. An example of seeing a similar grinder in action can be found on the following link - https://www.youtube.com/watch?v=O7eimI_Gm9o. Inventor Frederick Wolseley made the world's first commercially successful power-shearing system in Australia in 1888. US company Cooper, which had been founded in 1843 as a maker of sheep dip, began selling Wolseley equipment in the USA in 1895. The Chicago Flexible Shaft Company successfully entered the power-shearing market a few years later and entered a joint venture with Cooper. It set up a branch in Sydney and sold shearing sets, and engines to power them, into the Australian market. In 1921 the US parent company, realising it needed to make products whose sales were not as seasonal as those of shearing equipment, made its first household appliances and branded them Sunbeam. In 1933, changes in exchange rates and taxes led the company to manufacture engines and shearing equipment in Australia via subsidiary Cooper Engineering, which changed its name to Sunbeam in 1946. Although most Australians know of this company as a major manufacturer of household appliances, its rural division flourished and retained the Sunbeam name for shearing equipment even after it was taken over by New Zealand company Tru-Test in 2001. The grinder is formed from a central arch shaped block of green painted metal. Much of this paint has been lost to age, leaving the grinder in a ‘farm used’ condition with much surface oxidation present. On the front of the arch is a specification plate, reading “Cooper S.E. ball bearing grinder. Made and guaranteed by Sunbeam”. At the foot of the arch, three bolt holes are found for securing the grinder to the base of a solid wooden surface. Two of the bolt holes are found on the front of the grinder, with another found on the rear. From the central arch, a bolt protrudes to the right of the grinder. This large bolt is for securing a grinding plate to the grinder. Above the central arch is a pendulum which holds the comb / cutter that is being sharpened. From the pendulum, a large arm extends down (not pictured) to meet and strike the plate spinning at a rapid speed. On the left-hand side of the central arch of the grinder, a wheel is found which a belt is attached to for power. This belt is then attached to a separate engine, spinning the wheel and hence powering the grinder. The wheel is partially covered with a section of protective bent tube, designed to provide protection from the rapidly spinning wheel. Below this wheel is the belt shifter. It is designed to move the protective bent tube from one side of the grinder to the other, to accommodate the grinder in the setup of different shearing sheds. The two separate grinding plates are identical. They have a slight slope for sharpening the comb and cutters in the correct method, with a slight bias towards the base, or “tooth”, of the equipment. The disks have a large central bolt for attaching to the grinder. They have tags on the horizontal axis of the grinding plates, for securing the plates in transportation, and to help with initial alignment when setting up the grinder. The reverse of these grinding plates has the same green painted metal finish found on the grinder. This paint is also in a ‘farm used’ condition, with surface oxidation present. The grinder would be provided from the factory with a comb holder, shifter for securing the grinding plates, emery cloth and emery glue. The emery cloth is what does the actual grinding and is applied to the grinding disks, replacing once well worn. These items can be seen in the final images in the multimedia section, showcasing advertising for this grinder. Plate. Inscribed. “Cooper / S.E. BALL BEARING GRINDER / MADE AND GUARANTEED BY / Sunbeam / CORPORATION LIMITED / SYDNEY MELBOURNE / ADELAIDE BRISBANE ”sheep shearing, shearing equipment, sunbeam, grinder

The donor (Lynn Fitzpatrick) purchased these knitting needles 20 years ago from an opportunity shop. Aero Knitting Pins are a discontinued brand that were popular in the 1960s, 70s and 80s. They are made of smooth, aircraft-quality anodized aluminium. To this day, they are a popular and sort after knitting needle. Being a long-lasting product, they are often given as heirlooms. Abel Morrall was a major needle manufacturer from Studley, a town near Redditch. In 1785, Michael Morrall who was taught the art of needle making by a maternal uncle, moved to Studley. He founded the Abel Morrall company with his brother Abel, and another unnamed brother-in-law. Within five years the company was producing 40% of the 2.5 million needles that were made each week in the Redditch area. In 1811 the company introduced the concept of creating the eyes by using a stamping press. Additional machines were invented by them throughout the 19th century leading to major improvements in the way needles were produced. Abel Morrall demonstrated their needle making machinery at the Great Exhibition of 1851 and Queen Victoria personally inspected it. The company selected the demi-griffin for its trademark in 1861, which can be seen on older products produced by the company. Set of four knitting needles stored within paper packaging. Packaging features black, red, and white ink, detailing the selling points of the Aero Knitting Pins. The packaging folds with 3 main sections, each providing different insights into the knitting needles. Examples of this are " CANNOT SOIL LIGHT WOOL", "...SPECIALLY TAPERED POINTS WHICH WILL NOT INJURE THE FINGERS" and "RUSTLESS-NON-GLITTER FINISH". As the packaging unfolds, the grey knitting needles become visible. The needles can be removed from the packaging by sliding them through small bands of paper that hold the needles secure while in transportation. The four knitting needles are a “NEUTRAL” grey colour finished in a double point style.Printed. Orange, White and Black Ink Numerous, see multimediaabel morrall, knitting needles, knitting pins, 1960s home knitting

This set of two posters were displayed in the sale rooms for wool, skin, hides, and tallow at the Wool Exchange in Melbourne, on the corner of King and Little Collins Street. The posters were found in the storeroom under the white sale room in the late 1970s, when the Melbourne Woolbrokers Association moved around the corner to 530 Little Collins Street. The first poster is dated 21st of September 1914. It predates the second poster which replaced it on the 4th of December 1914. The posters detail that the Auctioneer will accept any bid from German or Austrian buyers on the condition that the buyer is not acting on behalf of any country which is at war with Great Britain. The Auctioneer also reserves the right to cancel any purchases found to be in violation of this condition. Presumably, the posters were in use until 1916, when Australia's 7th Prime Minister, Billy Hughes, negotiated the sale of Australia's entire wool clip to the British Government for the remainder of The Great War. The British government agreed to buy Australia’s entire wool production in 1916 at 55% above market price. In the end, £160,000,000 British pounds was paid by the UK Government to Australia for the nation’s entire wool clip between 1916‑1920. This would be equivalent to £7,619,760,000 in 2022 money when accounting for inflation, or $13,239,000,000 AUD.Two posters on yellowed card. The first poster is printed in black text with a title of “NOTICE”. The second poster is printed in red text with the same title, “NOTICE”. Both posters have 4 body paragraphs of text, detailing restraints put on potential wool buyers because of war with Germany in the Great War. Both Posters are finished with a date in the bottom left corner.the great war, world war one, melbourne wool exchange, melbourne wool brokers association, wool sales, 1910s

Ford and McFarlane shearing handpiece c.1890. This shearing handpiece is from ‘Wellington Lodge” in Tailem Bend, South Australia. Wellington Lodge today is an Angus beef farm; however, the property has a long history which includes wool farming. Wellington Lodge has been in the McFarlane family since the 1840’s and was originally around 19000 acres. The donor, Brian Licence, assembled this handpiece out of spare parts he found while classing wool on the property in the 1960s. Brian showed the finished handpiece to the owners once his classing work was completed and was told he could keep the handpiece as a souvenir. Brian also classed wool at “Jockwar” and “Pleasant Park” in Penola for members of the McFarlane family during the 1960s. The handpiece is named after Ford, the name of the engineer who designed the handpiece and McFarlane, the owners of Wellington Lodge Station and employers of Ford. This handpiece was developed as a prototype for use on the property. The handpiece which is made of solid brass is in a “used condition” and has been patched with solder. The handpiece is stamped with the number 10. Internally, the handpiece is powered from a drive mechanism of compressed air, this compressed air was typically produced by burning mutton fat. The handpiece comes from the pre-electrical– steam engine era of shearing. Brass metal shearing handpiece. A three-pronged fitting to hold both the comb and the blade protrudes from one end. A cylindrical stem extends vertically from the other. This is likely where a connecting rod to the shearing plant would be found. Below this vertical stem, the handpiece has an additional threaded hose fitting. This is likely where compressed air was delivered into the handpiece. The inscriptions can be found on the rear, near the previously mentioned vertical stem. Around this stem is also where the repairs of solder can be found. These repairs are unique to this handpiece and are not common practise.Etched. Base of handle. “FORD & McFARLANE . SHEEP SHEARER . Etched. Base of handle. “10”sheep shearing, shearing equipment, ford & mcfarlane, wellington lodge, tailem bend, south australia, shearing handpiece, shearing

The donor, Brian Licence, assembled this Wool Sample Book while studying at the Gordon Institute from 1960-62. Brian studied Wool Classing and worked for a decade in this profession before moving to Melbourne which required him to change careers. The National Wool Museum accepted a donation from Brian in 2022 of several mementoes relating to his career in the wool industry. This wool sample book joins a collection of 8 others within the museum’s collection, with the oldest dating to 1870 at the time of writing in 2022. Large black bound book with ribbon for fastening containing 12 double-sided blue pages. Pages have several samples of shorn wool mounted and annotated to include information such as specific breeding, shearing faults, and geographical area. The book concludes with four pages without wool samples. Two of these pages relate to plans for a shearing shed and other industry related structures. The final two-pages relate to the anatomy of a sheep. Wool sample books were constructed by Wool Classing students at the Gordon Technical School as examples of what to look for when classing wool. The students were tasked with constructing these books with samples they retrieved themselves from several different farms and animals. The book would serve as a reference point for the wool classers throughout their years in the field, it was always on hand to refresh knowledge. This book was constructed by Brian Licence over his schooling at the Gordon between 1960 and 1962. Front Cover. Handwritten, White Ink "Wool Sample / Book. 1961”wool classing, gordon technical college, brian licence

The National Wool Museum accepted a donation from Brian Licence in 2022 of several mementoes relating to his career in the wool industry. This Wool Classing Exercise Book was written by Brian in his time at the Gordon Technical College from 1960-62. Brian studied Wool Classing and worked for a decade in this profession before moving to Melbourne which required him to change careers.This Wool Classing Exercise book begins with a grey cover and a blue and silver metal binder. It has the number “240” handwritten in white pencil at the centre of the cover and “Brian Licence Animal Husbandry” written in blue ink on the top right corner. Internally, the book is handwritten with occasional hand drawn images. This work is completed on yellowed pages with faint blue lines, for assistance in clarity of handwriting. The pages are surrounded by a margin of red pen. The exercise book’s content is about basic animal husbandry for sheep that a Wool Classer may need to know while in a shearing shed. It is handwritten. A selection of pages have been photographed to give an impression of the information taught in classes 60 years ago. This includes information about: - Dentistry - Skeletal - Blood Circulation - Breathing - Internal parasites The book has 50 completed pages of handwriting on both front and back. Handwritten, white pencil. Centre of cover. “240” Handwritten, blue ink. Top right corner of cover. “Brian Licence. / Animal Husbandry” gordon institute geelong, 1960s sheep farming, wool classing, sheep dentistry, sheep skeletal, sheep blood circulation, sheep breathing, sheep internal parasites

The National Wool Museum accepted a donation from Brian Licence in 2022 of several mementoes relating to his career in the wool industry. Brian studied Wool Classing and worked for a decade in this profession before moving to Melbourne which required him to change careers. This Wool Classers’ Handbook was given to Brian in 1966 as part of his membership to the Woolclassers’ Association of Australia. Brian was a member of the Woolclassers’ Association from 1962-72. The Woolclassers' Association of Australia was a trade union representing Woolclassers. It amalgamated with the Australian Workers Union in 2009. The Association had 1200 members in 1997. The Australian Woolclassers' Handbook 1966-1967 begins with an orange cover. It has “The Australian Woolclassers’ Handbook” written at the top centre of the cover in green text. Internally, the book is typed and contains information which is of use for Woolclassers and their rights and responsibilities within the association. A selection of pages have been scanned to give an impression of the information within the booklet. The book is a 44-pages long.Printed, green text. Top of cover. “THE / AUSTRALIAN / WOOLCLASSERS’ / HANDBOOK. “ Printed, black text. Bottom right corner of cover “1966-1967” Printed, green text. Bottom left corner of cover. “WOOLCLASSERS / ASSOCIATION / AUSTRALIA” Printed, green ink. Bottom right corner of cover. Picture of Ram’s headwool classing, brian licence, woolclassers’ association of australia

The National Wool Museum accepted a donation from Brian Licence in 2022 of several mementoes relating to his career in the wool industry. Brian studied Wool Classing and worked for a decade in this profession before moving to Melbourne which required him to change careers. These Member’s Tickets served as proof of Brian’s membership to the Woolclassers’ Association of Australia from 1962 to 1972. The Woolclassers' Association of Australia was a trade union representing Woolclassers in Australia. It amalgamated with the Australian Workers Union in 2009. The Association had 1200 members in 1997. 11 individual-coloured booklets, 10 original and 1 duplicate. The duplicate is from the year 1965/1966 when Brian Licence transferred from being a probationary member of the Woolclassers’ Association of Australia to a full member and hence received a new ticket which reflected this change. Internally, there is no difference in any of the booklets over the 10 years. Externally, there is only a slight change, with the Woolclassers’ Association of Australia's logo being included from 1965/1966 onwards. The booklets are a single piece of card folded at the middle to make 4 pages. The first page gives the name of the association, the year of issue, and in later years the Association's logo. Internally, the booklet provides the location of the Association, the name, address, and signature of who the booklet certifies, and details about the member’s rank, an Overseer, Expert, Full, or Probationary Member. The date and signature of the Secretary of the Association conclude the internal pages. On the rear page, the Head Offices of the Woolclassers’ Association of Australia branches in NSW, Victoria & Tasmania, South Australia, Western Australia, and Queensland are provided. Booklet one is on yellow card with black text and is for the years 1962/1963 Booklet two is on aqua card with black text and is for the years 1963/1964 Booklet three is on blue card with black text and is for the years 1964/1965 Booklet four is on orange card with black text and is for the years 1965/1966 Booklet five is on orange card with black text and is for the years 1966/1967 Booklet six is on red card with black text and is for the years 1967/1968 Booklet seven is on white card with green text and is for the years 1968/1969 Booklet eight is on turquoise card with black text and is for the years 1969/1970 Booklet nine is on cream card with black text and is for the years 1970/1971 Booklet ten is on a lavender card with blue text and is for the years 1971/1972 Booklet eleven is on peach card with black text and is for the years 1972/1973 Multiple. See multimediawool classing, brian licence, woolclassers’ association of australia

The National Wool Museum accepted a donation from Brian Licence in 2022 of several mementoes relating to his career in the wool industry. Brian studied Wool Classing and worked for a decade in this profession before moving to Melbourne which required him to change careers. These Wool Classing Clip Reports date from 1965 to 1966, there are 7 total. The reports give feedback to the wool classer about their clips recently classed. They include some suggestions as to how a wool classer may improve their performance, and how a wool grower may be able to increase profits from their flock.8 sheets of paper, slightly under a4 size at 260 x 205 mm. 4 sheets have a header from Elder Smith Goldsbrough Mort Limited, 2 from Bennett & Fisher Limited, and 1 from Roberts, Stewart & Company Limited. All Wool Classing Clip Reports have the same structure, a header from the sending company, a body paragraph of black ink from a typewriter, concluding with a signature at the bottom of the page. Some of the pages have yellowed with age, others have slight tears. Report 1 is by Elder Smith Goldsbrough Mort Limited. It is dated 4th March, 1965. Report 2 is by Bennett & Fisher Limited. It is dated 7th October, 1965. Report 3 is by Bennett & Fisher Limited. It is dated 11th July, 1966. Report 4 is by Roberts, Stewart & Company Limited. It is dated 12th July, 1965. Report 5 is by Elder Smith Goldsbrough Mort Limited. It is dated 9th November, 1965. Report 6 is by Elder Smith Goldsbrough Mort Limited. It is dated 5th July, 1965. Report 7 is by Elder Smith Goldsbrough Mort Limited. It is dated 26th October, 1965.Multiple. See Multimediawool classing

Two items of newborn clothing dating to 1944. The first item is a dress and the second is a singlet. Both items are made from wool and are in new, unused condition. The clothing was owned by Mrs L. Brawdrup and was donated to the National Wool Museum in 2022 by Lila Gore.Clothing item one is a cream woven dress. It is finished at the sleeves, neck, and hem with a white lace trim. The trim is formed from a thread that has a metallic gleam, presumably cotton. The dress is styled under the neck with a stitched patterned of frills and flowers in the same white metallic thread. The dress gathers under the armpits, similar in style to a dirndl. At the rear, the dress is loosened and fastened by 3 press stud buttons in an opening at the centre. Clothing item two is a cream woven singlet. It is finished at the sleeves, neck, and hem with a white lace trim. The trim is formed from a thread that has a metallic gleam, presumably cotton. The lace is like the dress; however, it is less intricate. baby clothing, 1940s, 1940s baby clothing

Program of the Closing Ceremony of the 1988 Seoul Olympics collected by Doug Pleasance. Cover colour is black to represent the close of the Olympics and correspond with the concept of 'Yang' , contrasting the Opening Ceremony book which was coloured white to represent 'Ying'.The Program is an oversized booklet containing the information of the layout and running of the Games of the Olympiad Seoul 1988 Closing Ceremony. The cover of the program is black to represent the close of the Olympics and corresponds with the concept of 'Yang' , contrasting the Opening Ceremony book which was coloured white to represent 'Ying'. 1988 seoul olympic games, closing ceremony, seoul, book, programme, ying, yang

The official program of the 1992 Barcelona Olympic Games collected by Doug Pleasance from working at the Olympics.The program is A4 in size with a depiction of the Olympic rings highlighted by a vibrant sunrise behind them. The foreground of the image reveals that the Rings are rising above the world. In the left hand bottom corner is a summary of the price of the book in a number of currencies. The logo for the Barcelona Olympics along with title and the coloured Olympic rings appears below the larger Olympic rings. The back cover of the book has been used as an advertisement page depicting a high jumper jumping off a can of Coca-Cola with the phrase "Sensacion de Vivir!" above. There is also another Barcelona Olympics logo paired with the Coca-Cola logo at the top of the page.Record dels Jocs de la XXVa Olimpiada Recuerdo de los Juegos de la XXV Olimpiada1992 barcelona olympics, sport, athletes, programme, booklet, ceremony

My name is Deanne Gilson and I am a proud Wadawurrung woman living on my ancestral Country around Ballarat in Victoria. My practise aims to highlight and bring back traditional women’s symbols and ceremonial practises that reference the lived experience of my ancestors. By reviving traditional marks found on artefacts and women’s business, I am forming links with past ancestral knowledge so that is not lost and continues for the future generations. My art practice relies heavily on the use of symbols and form as a metaphor for the body. I have worked as a full-time artist for over thirty-five years. Many artworks tell stories of the spiritual aspects of culture and myths. Dreaming and Songlines, further creating a yarning space, bring the gap towards reconciliation and healing for my people and others through shared sharing stories. A main focus of my art practice tells the birthing tree and scar tree stories and how Wadawurrung women have evolved and survived, since before and after colonisation. The old symbols find new life, connecting to the contemporary ones, further connecting us all to this Country we all call home.Yaluk, Beep, Murrup, meaning Water, Country, Spirit, incorporates the traditional mark of the wave pattern (often found on wooden shields) used by my ancestors, along with the basalt plains across Wadawurrung Country. By depicting the interaction between the Water and Country, I use ancestral knowledges that are not seen but intuitive to myself, while juxtaposing them against the ancestral stone circle knowledges, embedded with the DNA of our stories. The ochre is reclaimed as real, it is marni-beek, meaning Country, in particular the white ceremonial ochre, often seen on the painted-up figure and used today to reconnect back to our ancestral memory. Reclaiming what was lost through colonisation, but still present in our Dreaming that flows on today through the water spirit. Country has no time limits and water connects to our bodies, which are made up of water. We as a clan, are still here today, living and being on Country, our ancestral spirits live on through us. The original painting is a contemporary account of using ochre to reclaim ancestral knowledge and to be part of the ceremony that is yaluk, beep, murrup. wadawurrung, deanne gilson, water, country, spirit, first nations art

This book was produced by Paragon and contains knitting patterns for baby clothes.Paragon / KNITTING BOOK / Cuddle Cardigans / BIRTH TO 2 YEARS / BOOK 66 / Price 1'3knitting handicrafts - history, paragon art needlecraft, knitting, handicrafts - history

This book was produced by Patons and Baldwins and contains knitting patterns for womens garments in fair isle knitting.Patons / KNITTING BOOK / NO. 262 / "DUNKELD" - See page 5 / P&B / WOOLS / FAIR ISLES / 1'-handicrafts - history knitting - fair isle, patons and baldwins (australia) ltd, handicrafts - history, knitting - fair isle

This book was produced by Patons and Baldwins and contains knitting patterns for mens, womens and childrens garments.Patons / KNITTING BOOK / NO. 285 / "PAULINE" / See page 12 / 6d.handicrafts - history knitting, patons and baldwins (australia) ltd, handicrafts - history, knitting

This book was produced by Patons and Baldwins and contains knitting patterns for mens garments.Patons KNITTING BOOK / No. / 399 / No. / 399 / P&B / WOOLS / "TREVOR" - See page 10 / 1'3d.knitting handicrafts - history, patons and baldwins (australia) ltd, knitting, handicrafts - history

This book was produced by Patons and Baldwins and contains knitting patterns for womens garments.No. / 400 / Patons / KNITTING BOOK / No. / 400 / "MAGNOLIA" / See page 10 / P&B / WOOLS / 1'6d.knitting handicrafts - history, patons and baldwins (australia) ltd, knitting, handicrafts - history

One of a collection of 56 knitting pattern books donated by Mrs Hilma Carruthers. These books had been used by Mrs Carruthers, her mother and her two daughters. Book was produced by Patons and Baldwins and contains knitting patterns for women's and childrens garments.Featuring PATONS NYLETTE CREPE YARN NO. 538 / Patons / KNITTING BOOK / No. 538 / 2'-handicrafts - history knitting, patons and baldwins (australia) ltd, handicrafts - history, knitting