Box cameras were first produced in the late 19th century and were intended to be used by amateur photographers. This type of camera was a simple one with the lens at one end and the film at the other and the provision for 12 photographic plates. The spring-loaded lens folded into the camera and one side of the box served as a base for the lens to sit on. Cameras of this size and shape were made until the mid 1920s. This camera case is retained for display purposes.This is a wooden rectangular box which is covered in black leather. The box is a camera case and has a top lid with metal hinges and metal clips and five glass apertures. There are two knobs or buttons which were originally adjustable mechanisms and the remnants of a leather strap on one side of the box. The leather on the outside is partially torn away. Inside the box the photographic mechanisms and the lens are missing but there is a part of the metal spring still evident. There are also eight photographic plates loose inside the box. early photography in warrnambool, history of warrnambool

The photograph was taken after Coles Supermarket and Sunbury Shopping Square were constructed on the railway land on the east side of the line in 1989, but before the Safeway-Woolworths complex was built in 2000 on the west side of the railway line. The open land on the west side of the line was used by rail communters as a car park.A coloured photograph showing part of the T intersection at Cornish and Horne Streets. A large pine tree is growing at the corner immediately in front of a pedestrian crossing. The railway car park, metal water tower and Coles Supermarket are in the background. A boy is walking along the footpath.cornish street, horne street, water towers, coles supermarket, sunbury railway station, george evans collection

At 130 cm, this cane is meant to be held at chest height by the user. In the 1940's the long cane 'two point touch' technqiue was pioneered by Richard Hoover, which combines swinging the cane from side to side and tapping either side of one's shoulders to identify obstacles and changes in walking surfaces.Wooden white cane with crooked handle with metal join and metal tipassistive devices, orientation and mobility

Joyce Hayward was awarded the British Empire Medal in 1981 for services to the arts in Warrnambool. The British Empire Medal was instituted in 1917 as part of the Order of the British Empire and in 1922 became a separate award known as the British Empire Medal. Joyce Hayward came with her husband Cyril to Warrnambool from England in 1955. For 30 years they were the dominant figures in the performing arts organizations in Warrnambool. Joyce Hayward was the Director of the Warrnambool Theatre Company from 1955 to 1985 and directed more than 80 plays and musicals. She founded the Warrnambool Calisthenics Club, helped develop the Holiday Actors organization and was a key figure in the revival of the Warrnambool Arts Council in the 1970s. She was a Life Member of the Warrnambool Theatre Company. She also helped establish the Performing Arts Centre in Warrnambool. She received the Warrnambool City Council Citizenship Award in 1970.It is a significant honour to be awarded a British Empire Medal and the acquisition by the Warrnambool and District Historical Society of the medal awarded to Joyce Hayward is of considerable importance. It is a rare item.This is a silver medal with a bar attached and clip at the back for the wearer and a red corded ribbon in a bow form on the silver attachment at the top. There is also a separate piece of red ribbon. The medal box is red leather material and lined with cream silk and velvet. Side one: E11R, Instituted by King George V., 4 armorial images, crown Side Two: For God and the Empire, For Meritorious Service, image (possibly Britannia) and a sun british empire medal, joyce hayward

Brown cardboard square box lined with beige tissue paper. Containing one reel beige cotton on cardboard reel and a roll of cotton tape with handwritten name 'Rose Humphreys'Handwritten with biro on top of the box: Rose Humphreys / Tawonga & / District/ Hospital /3699 / Aid No: 229218 MB On one side: 41and on the opposite side: Pension No. / HO 20171L tawonga district hospital, sewing kit

Cigarette Lighter manufactured by Dept of Defence for use by Australian troops.Cigarette lighter. Engraved with illustrations of a palm tree, hut & sunset. Made of brass coated with Electro plated nickel silver..2) On one side engraved "Xmas Wewak 1945" on opposite side "RHS" and on base .1) "MF 1945 D (arrow pointing upwards) D MK 111"cigarettes, lighters, military

This item was widely available in shops during the early to mid 20th Century. The flake cut tobacco was used for hand-rolled cigarettes and some pipes.This item is significant for social and historical reasons. This type of packaging is no longer found and the use of this type of tobacco is diminishing. We only have a few of these tins in our collection and its use is mainly for interpertive purposes. green, hinged-lid tinHavelock Flake Cut Tobacco, 2oz net weight when packed,(on lid) Side "The British -Australasian Tobacco Co. Pty Ltd Aromatic Flake Cut (on side)tobacco, tin, smoking, personal, accessories, effects

This ink-well was used in the Bacchus Marsh Court House, possibly for book-keeping and/or for court records. This type of ink-well and pen were in use everywhere in schools, businesses, courts, etc before the invention of the type-writer and the ball-point pen. Clerks were usually male and a good copperplate hand-writing was admired. Ink was often mixed by hand used a powdered ink mixed with water.Of local significance in the history of the town of Bacchus Marsh.Round pewter ink-well, with hinged lid and ceramic insert. Five round holes pierced in inner rim of metal to hold pens. Two ribbed bands around exterior of pot. Two bands indented around top of lid. Insert designed to hold ink. Pen with marbled blue handle, metal nib holder and metal nib.Indecipherable imprint on bottom of pot, possibly machine markings. Illegible written marks on side of pewter pot. Ceramic insert marked on side and bottom by red and black ink.ink, ink well, hand writing, record keeping, pens, nibs, clerical work, court records

Good . Some rust and scratches but otherwise serviceable.Badly damaged adhesive label on right side of blade 60 mm from handle, Hand engraved number on same side of blade immediately below the hilt V16488022

One of the first large goldfield meetings was at Castlemaine in 1851. After the extraordinary success of the Mt Alexander Diggings the Government issued a proclamation, raising the licence fee from thirty shillings to three pounds. As soon as these intentions became known a public meeting of miners was held. For miles around work ceased, with diggers travelling as far as Bendigo to attend the meeting. It is estimated that around 18,000 people attended the meeting. The notes with the engraving state The trees in this locality are chiefly Stringybark; some of them are peeled of their covering, as many persons prefer erecting bark huts to living in a comfortless tent. The various groups, and costumes of the men, are characteristic of our gold digging community. This item is part of the Federation University Art Collection. The Art Collection features over 2000 works and was listed as a 'Ballarat Treasure' in 2007.Colour lithograph of a meeting of diggers at a meeting in Mt Alexander. The meeting was the result of goldfields agitations against the license fee. lower centre "Great Meeting of Gold Diggers Dec 15th 1851" lower left side "Drawn By D. Tulloch" lower right side "Engraved by Thomas Ham"art, artwork, ham, thomas ham, tulloch, castlemaine, goldfields agitation, printmaking, edition, coloured lithograph, david tulloch, gold pan, shovel, wheelbarrow, waggon, bark hut, ring barked tree, gold mining

The VP series was released in September 1991 with mainly cosmetic and feature changes to the outgoing VN Series Commodore. The 3.8 litre V6 and 5.0 litre V8 engines from the VN were carried over, but the V6 engine received various revisions that improved its refinement and noise. Semi-trailing arm IRS became standard on Calais and Commodore SS models and became an optional extra on lower-end models. This new suspension drastically improving ride and handling over that offered by the live rear axle. ABS brakes were also introduced in the VP range as an option on Series 1 Calais and Commodore SS models, and on most models with IRS for Series II versions. Additional security features were introduced across the range, including an ignition-disabling device and a driver's door deadlock. Power mirrors were also a standard feature across the model range. The VP Calais was also sold in Thailand, with 3.8 V6 version, later it used an Opel 2.6-litre C26NE inline-six Dual Ram engine.1991 model VP Holden commodore sedanLion and Stone badge on bonnet , Holden badge left hand side boot , Lion and Stone badge on boot centre, Commodore executive on boot right hand sidevp holden, vehicle, car

Undated photograph on postcard depicting horses and carts with gas lamp in the distance on Bourke Road, Camberwell. Front of postcard: 'Bourke Road, Camberwell' Back of postcard: 'Post Card' 'This side for correspondence' 'This side for address' 'Stamp here' 'Printed in Germany.' Handwritten notes '22649 $20'camberwell, bourke road

The preservation of plants and flowers for both decorative and scientific purposes dates back to ancient times. Drying and pressing flowers became a popular hobby and preservation method in Victorian England. The flower press was readily available to buy or simple and inexpensive to create. This flower press was marketed through Henry Buck Pty. Ltd. in Melbourne, Victoria. Henry Buck migrated from England and established his store in Melbourne in 1890. The business dealt primarily in menswear, but also had other domestic lines. The business, trading as Henry Bucks, still operates in Melbourne and several other locations.This item is representative of a popular hobby of the Victorian era.A flower press made from timber with metal clasps and screws. The front is decorated with a parquetry flower design. There are 2 metal strips screwed onto the timber horizontally. These are secured by wing screws which can be adjusted to hold the back and front together. They allow pressure to be adjusted depending on what item is being compressed.Label on back: Left hand side around red shape with HB in the centre "THE SIGN OF/ EXCELLENCE" On right hand side: "LONDON/ Henry Buck PTY LTD. / MELBOURNE"flower drying, victorian era hobbies, henry buck pty. ltd.

Professional Straight Razor Sharpening Strop All Leather Construction, Suede Side And Smooth Side Hanging Eyelet Attached at Top popular 1920's. Circa 1920's used professionally in Barber Shops. Leather razor strop (strap) leather finish on ends with inscription "soft finish" on the leather end of the strop. A chrome loop is attached to the end for hanging or attaching. "Soft Finish" annotated on the end of the leather finish of the strop. leather razor strop

The large building left of centre is the Star Hotel. Two sides of Main Street on the eastern side of High Street are occupied by shops of David G HamiltonBlack and white postcard photograph of Rutherglen rooftops, probably taken from the roof of the Soldiers' Memorial Hall at the corner of Murray and High Streets.At bottom left of photo: "Rutherglen. 7." Written at top right of photo, with an arrow pointing to a house: "Our place". On back of card: "Rutherglen. April 4th 1918 [or 1910 - illeg.] | My dear Sister Marion, Mumma, Sadie, Florrie, Ruth & Mavis all join in wishing you Many Happy Returns of Your Birthday. We received Joan's letter today. Hope you are all well & that your arm is alright. Ruth is getting along nicely. Best love to all. Your affectionate Brother George."rutherglen, main street, high street, d g hamilton, star hotel

This computer was used at the Ballarat College of Advanced Education. The 2674A was introduced in 1983, and obsoleted on November 1, 1985. (http://www.hpmuseum.net/display_item.php?hw=45) The 9121D monitor was a dual, 3.5 inch floppy disc drive with an HP-IB interface. A grid of electrical beams on all fours sides of the screen gave the monitor touch screen capability. Its drives accomodated SS/DD discs (270KB). The 9121S was the single drive version of the 9121, priced at $1185. The 9121 was the first HP product to come in the new slimline, stackable form factor. HP used this form factor for computers and disc drives for over ten years. The 9121 used the AMIGO command set. The 9121 was obsoleted in November of 1987. You can use your PC's hard drive (with an HP-IB board installed) to emulate this drive with vintage HP computers. (http://www.hpmuseum.net/display_item.php?hw=288) Hewlett Packard grey monitor Series 100/150(HP2674A) and grey computer (HP9121). The monitor is an early touchscreen. A series of holes on all four sides of the monitor enabled a grid of electric beams allowing touchscreen functionhewlett packard, computer, monitor

This photograph of the plaque on the side of the P.S Adelaide while she was a stationary exhibit in the Hopwood Gardens from 1963 until 1984 tells the story of her manufacture and her work life up until 1963. The P.S Adelaide was launched on 21st July 1866. It was owned by J.G.Grassie from Poon Boon Station and the Officer Family of Murray Downs Station Swan Hill. The Adelaide was named after the niece of the Officer Bros, Adelaide Blackwood. The shipwrights who built her was George Linklater. The Adelaide brought wool and passengers from the wool stations on the Murray and Darling Rivers down to the Echuca Wharf. In 1872 she was sold to David Blair & Sons. She was used to bring timber from the Barmah Forest to the Echuca Wharf. She did this work for the next 80 years. In 1953 she was tied up near the Mill and left In 1958 she went to Paringa South Australia to work in the sawmill industry again. In 1960 the Echuca Apex Club and The Echuca Historical Society raised enough funds to buy the P.S. Adelaide and return her to Echuca. In November 1963 she was lifted out of the water and placed in Hopwood Gardens as this was thought to be a way of preserving her. In 1984 it was decided to return her to the water to resume work as a passenger vessel. In that time the Port of Echuca and the Echuca Wharf had been restored as a Tourist Precinct. The P.S Adelaide is extremely significant as it it the oldest known wooden hulled paddle steamers in the world. She was built in Echuca in 1866 and still operates on the Murray River today. She has worked in the Wool Industry, the Timber Industry and the Tourist Industry.Coloured photograph showing the information sign which was attached to the side of the P.S Adelaide whilst she was a stationary exhibit in the Hopwood Gardens from 1963 until 1984.On the sign is written; " P.S Adelaide/built on the Murray at Echuca for Officer Grassie &Co. Of Poon Boon and Murray Downs stations. Launched 20th July 1866. The vessel is typical of the steamers trading in the era of the Riverina and Darling River trade of 1853 to the early 1900's and which had by 1872 established aEchuca as the second busiest port in Victoria. Worked in the Red Gum logging trade until 1958 under the ownership of the Murray River Sawmills Co. She was purchased by that company from David Blair Saw Miller of Echuca in 1861. 75ft. 4 inches X 12 ft.5 inches X 3 ft. 6 inches built of 3 inch red gum planking on an angle. Iron frames 2? X 2?5/6. 30 H.P. Nominal arc original and made by Fulton & Shaw of Melbourne. Twin cylinders. 14 bore. 16 stroke Stephenson's reversing gear controlled by Captain from the wheelhouse. Locomotive type red gum wood. Master, Mate, Engineer, Fireman, Cook, and Deckhand. p.s. adelaide, port of echuca, grassie, j.g, linklater, george, poon boon station, blair, david, murray river, darling river, logging industry, officer brothers., barmah forest, fulton & shaw, hutchinson, kevin, adelaide blackwood, murray downs station

This small barrel looks well used. Unfortunately, the inscription on the barrel is indecipherable so its story is a mystery. However, the bungholes on the side are a clue that it was once used for storing liquid, likely to have been liquor. Barrels have been used over many centuries for transporting and storing a wide range of dry and liquid goods. They are made by tradesmen called coopers, who use heat and steam to bend and shape the wood to suit the work in hand. They add metal reinforcing, handles, spouts and suchlike, to complete they process. Their produce also includes buckets, casks and tubs. Ships transported bulk liquor in their cargo, stored in wooden barrels. The barrels' round shape allowed them to be easily moved by rolling them into place. The body's shape gave the barrels added strength and the iron bands helped the wooden sheaves stay in place. The tops and bottoms allowed for easy grip. The bungholes gave access to government representatives, who would sample the contents, measure the alcohol percentage, and charge the appropriate duty or tax; the process was called Ullaging and the instrument they used was a Hydrometer. Hundreds of barrels of cement were imported into Warrnambool in the late 19th century for the construction of the Warrnambool Breakwater. Barrel-shaped concrete blocks are still visible at shipwreck sites such as on the LOCH ARD wreck, which carried cement among its cargo.This small barrel is representative of 19th century containers used for transportation and storage of liquid such as liquor. It is a historic shape that is still used in modern times.Barrel; wooden barrel, cylindrical shape with metal bands or ribs for reinforcement. The side has two bungholes; one has a bung or stopper. Inscription on top (indecipherable). (indecipherable)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, barrel, cask, small barrel, trade, coopering, cooper, casket, transport, storage, bunghole

The cottage was called "Hexham" and was a tourist 'rental' property. It was situated on Mackey's Peak Rd, Halls Gap. It was eventually demolished to make way for a private home.The photo shows a cottage with a verandah, surronded by trees which partly shade the right side. The window frames and door are painted red. A table and chair stand to the right side of the door and a deck chair and an arm chair are on the left side. "Kodacolor print, Kodak, April-71M" stamped on back in pink.buildings, houses

A blie coloured cover with the number 13 written on a white label and stuck on the top left hand side. There are two punch holes down the left hand side. The is a hand written number 3 on the bottom right had side.australia - armed forces - service manuals, m 60 machine gun 7.62

When the Philippine currency, or pesos, were reprinted in 1944, it was called the Victory series #66. The reason they named the series “66” was because that was the age late President Quezon passed away just after the liberation of Philippines. Philippine Victory notes (series 66) were printed by the US Bureau of Engraving and Printing. They were carried by US forces commanded by General MacArthur when they landed on Leyte Island on 20 October 1944. Philippines One peso denomination lithograph banknote. The face has a blue seal in the lower right side and on the left side is an image of a male. The reverse side has a pattern featuring the value in orange overlaid centrally in black with 'Victory' Victory series 66 No F15876228philippines, banknote, victory series #66

These medicinal products were used in the 1900's. Eucalyptus oil was used both externally for Lumbago, Rheumatism, Sciatica, Sprains, Cuts, Bruises and Burns and for all Throat and Cough disorders. McKean's Camphorated Oil was to be used carefully and under strict Accordance with the instructions. Adults to rub briskly on part affected, Infant use to be massaged gently. McKean's were in operation from 1890's - c1960's. The company appeared to have ceased in 2012. Friars Balsam similarly was used externally for Cuts, Wounds, etc. Could be taken internally for Coughs, Colds, Bronchitis, etc. 10 drops to one teaspoonful. The Bosisto bottle probably contained eucalyptus oil.Four glass medicinal bottles: 1. A small clear glass McKean's "Helping Hand' Eucalyptus Oil bottle, with a faded paper label with Trade Mark surrounding a hand illustration with leaves. Unadulterated is printed at the bottom of this label. Pure Eucalyptus Oil with its uses is included. On the back is a paper label with further instructions for use. The screw top bakelite lid is broken. 2. An angular shaped small brown SIGMA Camphorated Oil bottle with a stained paper label of the manufacturer details and uses. It has 'NOT TO BE TAKEN' stamped into one of the edges on the side of the bottle. Two other sides have three rows of crosses as a pattern. The metal screwtop lid is rusted. F1071 is stamped on the base. 3. A very small round brown Rolfe's Friars Balsam bottle with a broken cork stopper. It has a faded paper label with uses and the manufacturer's details. 4. A small blue tinted clear glass J. Bosisto medicine bottle with rounded corners and flattened sides on the front and back surfaces.The flat lip at he opening could have been sealed with a stopper. The sides of the bottle have a vertical joining line.1. 'McKean's 'Helping Hand' Eucalyptus Oil'. It has a faded paper label with 'Trade Mark (Registered) surrounding a hand illustration with leaves. Pure Eucalyptus Oil' 2. 'SIGMA Camphorated Oil SIGMA CO. LTD Melbourne'. 3. 'Rolfe's FRIARS BALSAM Rolfe & Co. Ltd. Melbourne'. 4. 'J. Bosisto Richmond' is stamped on front side of the front. On the base is stamped ' "English Bottles" '.medicines, medicine bottles, medicinal containers

A smoothing plane is a wood plane used for making a smooth surface to wood surfaces traditionally, these planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape or size required. The blade, or iron was likewise formed to the intended flat or level profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding and smoothing planes for the full range of work to be performed. Large crown mouldings or smoothing plane surfaces required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. John Moseley & Son: Records indicate that before 1834, the firm is listed at number 16 New Street, London and according to an 1862 advertisement the shop had been established in New Street since 1730, The Sun insurance records from the time show that John Moseley was the possessor of a horse mill in the yard of his premises, which means that some kind of manufacturing was taking place, as the mill would have provided power to run a saw or perhaps a grinding wheel so the probability is that he did not just sell tools, he made them as well. John Moseley died in 1828 and his will he names his four sons: John, Thomas, William and Richard. To complicate matters he also had brothers with the same first names; brothers Richard (of Piccadilly) and William (of Peckham Rye) are named as two of the executors. Brother Thomas is not mentioned in this will, but became a minister and was one of the executors of brother Richard’s estate when he died in 1856. From John’s will, we also learn that, although the shop was in New Street, he resided in Lympstone, Devon. The family must have had a house in that county for quite some time as both sons Richard and William are baptised in Devon, although John and Thomas were baptised in London. In the 1841 and 1851 census records, we just find William in New Street, but in 1861 both William and Richard are listed there as toolmakers. That Richard was staying overnight at New Street was probably just accidental as in 1851 and 1871, we find him with his wife Jane and children in Clapham and Lambeth respectively. In 1851 Richard is listed as “assistant clerk cutlery warehouse” and in 1871 as “retired plane maker and cutler”. Although the actual place of work is not stated, one may assume he worked in the family business. 1862 is a year full of changes for the firm. In that year, William had a new property built at 27 Bedford Street. In the catalogue for the 1862 International Exhibition, 54 Broad Street (later 54-55 Broad Street) is listed for the first time, which may very well coincide with the split of the business into a retail and a wholesale branch. Around the same time, they must have moved from New Street to 17 & 18 King Street because their manufacturing premises had been pulled down to form the New Street from Cranbourne Street to King Street. In January 1865, William died and Richard continued the business. In 1867, the partnership he had with his son Walker and Thomas Elis Hooker, is dissolved. Richard continued tool making at King Street and Bedford Street. Richard retired somewhere between 1867 and 1871, but the business continued. The business is taken over by W M Marples & Sons and tools continued to be made in London until 1904 when manufacturing relocated to Sheffield. A vintage tool made by an unknown maker, that was made commercially for firms and individuals who worked in wood and needed a tool that could produce a flat or level finish to timber. These types of planes came in various shapes and sizes to achieve the required finish to timber surfaces used in cabinet making. This item is a significant tool from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools only. Smoothing Plane Coffin typeMaker J Moseley & Son London and 2¼" also has OS stamped on side (probably an owner)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, moulding plane, plane, j heath, moseley

The artillery piece of the cannon was cast at the Low Moor foundry in England in 1861. It is a 68 pound muzzle loading cannon, capable of firing a 68 pound weight projectile. The arrow on the top of the barrel is the symbol of government ownership. It is probably one of the artillery pieces purchased by the Victorian government in response to the 1863 report by Captain Scratchley, which recommended 19 such artillery pieces be bought for the defence of Hobsons Bay, (Williamstown, Melbourne) (Billets p.12). It was possibly brought to Warrnambool in the late 1860s or the 1870s, to be used for training purposes by volunteers and local militia. The wrought iron runners were probably added to the slides at a later date. This model of carriage had been manufactured since 1855, and the traversing slide since 1860. The traversing slide of the wooden carriage absorbs the recoil when the gun is then returns to the gun to its original position for loading and re-firing. The properties of the timber (regarded as being Burmese teak) have helped to preserve these carriages in Australia. This particular carriage and traversing slide would have been manufactured about the same time as the gun (in 1861) in the Royal Carriage Department of the Royal Gun Factory in Woolwich, England. The gun would then have been assembled on the traversing slide of the carriage, then despatched as a unit. The wooden slide compressor mechanism that belongs to the cannon was used to limit the recoil when the cannon was fired. It is now stored separately for purposes of preservation. It is extremely rare, as it is the only one surviving in this group of South Western Victorian cannons.This 68 pdr cannon, mounted with its original wooden carriage, is part of the South Western Victoria collection of surviving 19th Century artillery pieces, item number W/F/02. It is rated as EXTREMELY RARE on a State, National and World level. The 68 pound smooth bore cannon of this period are not particularly rare either in Australia or overseas; its significance lies in its Victorian provenance and as an element in a major collection of 19th century cannon. The number of surviving carriages with traversing slides in this group in South Western Victoria is unique in Australia and probably in the World. Out of 10 such platforms surviving in Australia, the South Western Victorian group has half. Several survive around the world but probably not in such a large group. The wooden sliding compressor mechanism belonging to this cannon is extremely rare, and the only one in this South Western Victorian group of Guns and Cannons. As a whole, this cannon has undergone very little restoration or modification, giving it a high level of integrity.Warrnambool Garrison Cannon. 68pdr smoothbore, muzzle-loading, cast-iron cannon. Manufactured in Low Moor, 1861, No. 10310. Mounted on the wooden carriage with wrought iron traversing slide and wrought iron runners and fittings. The cannon's Cascabel is cast with a loop. The wooden slide Compressor Mechanism, or Recoil Mechanism, is extremely rare. This mechanism comprises two equal-sized sections of wood, one on each side of the centre, joined by metal rods. In the centre of this wooden platform, with openings, top and bottom is a 15cm diameter metal cylinder with two cusps on the edge of the top (this wood has split over time). Two parallel sides each have two 1cm thick metal "L' plates attached 15cm long and 8.5cm wide. With the unit is ‘ L’ bracket, curved bracket and bolt head.Cannon trunnion "LOW MOOR / 10310 / 1861" Top of the barrel "7045, (symbol of an arrow pointing up), 95 – 3 – 14, 1861, 209" Cascabel "CV / N / C" The rear of left-hand slide " "OD” “JW” “No 33” Side chock – “JW” twice. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, muzzle loading cannon, 68 pound cannon, low moor foundry, royal gun factory, warrnambool militia, warrnambool garrison volunteers, warrnambool fortifications, wooden sliding compression mechanism, carriage and traversing slide, 19th century cannon, traversing platform, garrison sliding carriage, 68 pounder

Sauce came in bottles bought at the local grocery store or at a large city store on a shopping expedition. The shape of the bottles changed. Bottles were re cycled remaining the property of the manufacturer. History of W. J. & F. Barnes, Pty. Ltd. Melbourne.Historical: Change of bottles - shape, glass, embossing, use Aesthetic: Display showing embossing and shape Clear glass medium sized bottle. The base is as wide as the top before it tapers into the neck and lip and then the screw top. From the base it tapers in before a very gradual taper to the broad part which is three quarters of the way up. The base is round but the sides have 4 wider 'panels' opposite each other. In between these are 2 smaller panels. Heavy embossing on 1 wider panel and base printed in capital letters.Side: vertically: 'This bottle is the Property of / W. J. & F. Barnes Pty Ltd. Melbourne' Base: Common Seal "A" with 'G' inside the top half and 'M' inside the lower half. Underneath the 'A' and across the middle is 'F1570' and below this is 'M'sauce, glass bottle, w. j. & f. barnes pty ltd melbourne, household

The design of this pair (RN 758 & 759) is based on Thonet’s No. 18 chair, which was originally produced in 1876 by Thonet, and is still one of the best-selling designs for café and restaurant owners. It is elegant, sophisticated and durable. The label notes the design as “AUS MASSIV GEBOGENEM HOLZE vorm” which translates to “solid curved sandals shape”, a good description for the back of the chair. The chairs have marks, paper labels and symbols on them that show that the maker was Harnisch & Co., Neuschler (also called Banská Bystrica) Furniture Factory in Neuschol (Beszterczebanya), Hungary, privileged makers for the Imperial and Royal Austrian-Hungarian Empire 1867 – 1918. Bentwood chairs are made by a process of wetting wood in water, bending it into curved shapes, then allowing it to dry so that the shape becomes permanent. This process originated by Michael Thonet, who had been given the right to bend wood into desired curves by the Austrian Courts in 1842. In 1856 he was granted a 13 year patent to manufacture chairs and table legs of bent wood treated by steam or boiling water. In 1859 his company Gebruder Thonet produced his original design. Thonet’s early designs also featured hand carved or laminated wooden seats. His Model No. 14 produced in the 1850’s, was his most popular design. After Michael’s death in 1871 the family went on designing and producing chairs. The No. 18 chair was produced in 1876, one of a group of chars with back inserts consisting of curves and loops of bentwood. The popularity of the Bentwood chair, even now, is due to its versatility and timeless quality. Its style, whether varnished or painted, suits any room in the house. The lightweight chairs are also popular for café and restaurant seating, as well as for public gatherings. They can be easily moved around and grouped in a variety of ways to suit any occasion.Chair, bentwood, 'French Bistro Chair' with pattern carved in seat. Backrest has inverted U shape inside that extends to the seat. Supports on eitherside of backrest's base join to back of seat. Legs have a wooded bracing ring. Marks; pressed into rim under seat. Paper label, cream with black print, on rim. Right side of label has symbol of Heraldic Shield. Text on label. Made by Harnisch & Co.Marks; pressed into rim under seat is "3" and "4", and "Crown [over] N", Paper label, cream with black print, on rim; Left side has Mark “N inside circle under crown”. Right side has symbol of Heraldic Shield. Text on label “Trade – K.u.K.- Mark / NEUSOHLER FABRIK FUR MOBEL/ AUS MASSIV GEBOGENEM HOLZE, vorm. HARNISCH & Co / NEUSOHL (BESZTERCaZEBANYA) UNGARN ' Hand written under seat "T H" in black paint, "T H " in white chalk. flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, bentwood chair, café chair, restaurant chair, meeting hall chair, thonet design chair, harnisch & co, k.u.k., neusohler fabrik fur nobel, approved manufacturer, neusohl (besztercazebanya) ungarn

In 1899 the Boers, descendants of Dutch settlers, declared war on the British forces. Enthusiastic civilians throughout the Australian colonies volunteered for service, supported by their respective colonial governments. After Federation Commonwealth units were also mobilised. Others who were unable to join Colonial or Commonwealth units enlisted in forces raised by other nations including Britain and South Africa. The first joint colonial regiment, the Australian Regiment, was formed from companies representing Victoria, South Australia, Western Australia and Tasmania. The British gradually wore down Boer resistance, and peace was declared on 31 May 1902. Over 15,000 Australians served in the Boer War. Australian casualties totalled about 1400, with 518 killed. Six Australians were awarded the Victoria Cross for their bravery. Children in schools around the different colonies of Australia (this was prior to Federation) raised money to hold Peace picnics. Wodonga's Peace picnic was held at the racecourse. Only about 70 of these medallions were struck. They were presented to the children who raised the most money for the Peace picnic in each area.This artefact has local, national and international significance as it recognises the first major international conflict in which Australian colonial soldiers were involved,A small medallion issued in commemoration of peace at the end of the Boer War. There is a hole through the top so that it can be attached to a chain or clip.OBVERSE SIDE: At centre within line circle veiled head of Queen Victoria facing left, at top of circle, crown, at sides Australian and Royal flags; below, WODONGA 1900 REVERSE SIDE: Within wreath, IN / COMMEMORATION / OF / PEACE / BRITISH BOER / WAR / "LEST WE FORGET"australian commemorative medals, boer war 1899 - 1902, boer war peace medallion

This miner’s pick was of the type used to extract limestone at the Warrnambool limestone quarries, mainly for buildings and walls. This pick cut the sides and the top of the block and then it was levered off with a crowbar at an angle of about 30° to 40°. These blocks were then reduced to the required size using cross cut saws. There were about 12 limestone quarries operating in Warrnambool in the 19th century and limestone was extensively quarried for about 85 years to the 1930s when quarrying ceased. Today there has been a small revival in the Warrnambool area in the use of limestone blocks for building. Warrnambool also once had several bluestone quarries on the outskirts of the town. This miner’s pick has a wooden handle with rounded sides tapering to a wider end. The wood is weather-worn and split in places, especially at the top end. The pick is metal with a curved shape that tapers to a point at one end. The metal near the other end has a cavity into which is inserted the wider end of the wooden handle. limestone quarries in warrnambool, quarrying in warrnambool, warrnambool history