Typed two page list - one foolscap and one quarto sheet, titled "Rolling stock data of cars operated by the Melbourne and Metropolitan Tramways Board", listing each class, car numbers, No. in Service, type, seat (Crush), trucks, wheel Truck centres, motors HP, Tare Tons, Controllers, Compressors and Length over bumpers. Carbon copy on plain paper. Extends to SW6 981, includes PCC 980. On the bottom of the quarto sheet has dated 20/12/48, revised 16/9/1950. Similar style to 5671, typed by Keith Kings, possibly from a MMTB data sheet.mmtb, tramcars, melbourne, lists

Copy of a photo of Ava Jane Hall, dressed in a ball dress. Original photo taken by Bartlett Bros. Bendigo. The dress has frills and bows and is about mid calf length. She is wearing a shawl over it and holding the sides of the dress out. P696 written on the top right corner. Sheet of paper with information of the photo. 'Wooton Lansell's granddaughter, Ava Jane Hall. The dress was made circa 1860. It was also worn in 1920 to a ball held in the Bendigo Town Hall. Photographed by Bartlett Bros. Bendigo. Bendigo Historical Society Inc. P696 photographed by Bill Hawking of Bendigo Advertiser 4/7/2000'.Bartlett Bros, Bendigodocument, memo, ava jane hall, peter ellis collection, wooton lansell, ava jane hall, bendigo town hall, bartlett bros. bendigo, bendigo historical society inc, bill hawking, bendigo advertiser 4/7/2000

Page with copies of three black and white photos. One is a group - The Peanut Set 'Knuts' 1914. The ladies are in fancy dress. Their dresses are knee length with bobbles on the hem s and diagonally around the skirts. They are also wearing various head dress. The other two are head and shoulder photos. They are dressed in clown costumes. Both are wearing high peaked hats. The one on the left is wearing a dark collar with long triangular edges. The one on the right is wearing a collar and tie and a jacket with beads along the edge of the collar. The one on the right is Daisy Kline, Geelong and the one on the left is not named. Written on the bottom of the page is Feldheim & Gotthelf.photo, group, female, peter ellis collection, fancy dress sets, the peanut set 'knuts' 1914, daisy kline, feldheim & gotthelf

Two part object. (1) A Slazenger 'Phantom IMF' tennis racquet with open throat, plastic butt cap and handle wrapped with leather. Manufacturer name across base of head. Model name printed along left throat pillar. Plastic butt cap features manufacturers name and cat logo. Logo also featured at base of throat.(2) Full length navy blue vinyl racquet cover with two zippers and printed with manufacturer's name and logo and model name. has woven adjustable shoulder strap. Materials: Metal, Adhesive tape, Plastic, Leather, Ink, Vinyl, Graphitetennis

Painting: 'John Donnelly at 9 years old, Blackwater Town'. Inscribed on top panel of stretcher: 'JOHN DONNELLY AT 9 YEARS / OLD / BLACKWATER TOWN'. A full length portrait of a male child in dress coat, vest, breeches and buckled shoes holding a shuttlecock and early racquet (probably a battledore). Next to figure is a hat placed on a chair. Oil painting on canvas, stretched on wood frame, and fitted with a velvet mount and bevelled wood hanging frame. Scratched into stretcher: 'ETL79'. Adhesive stickers on stretcher state:'2#' and '407'. Materials: Wood, Metal, Oil paint/Pigment, Canvas/Cotton, Adhesive label, Velvettennis

This dress belonged to Alice Frances Henty (1852-1932) the youngest daughter of Francis Henty (1815-89) and his wife Mary Ann Henty [nee Lawrence] (1821-81). It is recorded that Alice wore the dress at the age of six. Alice's father, Francis Henty, was the youngest son of Thomas Henty, who with his family, their retainers and property moved to the Australian colonies between 1829 and 1832. In 1834, Francis’ older brother, Edward, sailed from Launceston in Van Diemen’s Land to what was to become Portland in the western part of Port Phillip District [Victoria]. Francis, together with the first flock of Merino sheep [in Victoria], followed some months later. The first and second generations of the Henty family established vast pastoral properties in the Western part of the Port Phillip District. Francis Henty managed ‘Merino Downs’ near Casterton, while also living in his retirement at ‘Field Place' in Kew. The Henty Collection of nineteenth and twentieth century clothing, including outerwear and underwear, was collected, stored and exhibited over time by female family members descended from Francis and Mary Ann Henty. During the twentieth century, items from the collection were modelled in two fashion parades by various descendants [1937, 1959]. The items in the collection are historically and aesthetically significant, with provenance provided by oral and written tradition within or held by the family. A number of the items in the collection are very rare survivors, and provide researchers with the evidence needed to reconstruct the lives of notable women in the Port Phillip District [later Victoria] during the nineteenth and early twentieth century.Girl's two-tone, one-piece cotton voile dress from the 1850s has a high round neck and short sleeves has a lace insert on the front of the bodice and matching lace at the rear. The layered skirt is bordered with lace. Measurements (mm): Girth - Neck 609.6, Chest 635, Waist 558.8, Cuff 203.2, Hem circumference 2108.2. Vertical - Front neck to hem 685.8, Front waist to hem 508, Back neck to hem 723.9, Back waist to hem 534.4, Sleeve length 63.5. Horizontal - Neck to sleeve head 38.1, Cross back 304.8, Underarm to underarm 406.4.fashion -- 1850s, children's clothing, alice frances henty

Set of papers, handwritten concerning the development and timing of the "PMTT", Prahran and Malvern - about 40 sheets. Prepared by H. S. McComb - gives layout of the PMTT system, primarily of Burke Road, sketches of track layout, opening dates, sketches of various junctions, bridges, track miles, junctions, reconciliation of track lengths from various sources includes Whitehorse Road, Victoria St cable tram terminus, Kew Depot, Candy Corner, St Kilda terminus, Malvern Depot, High St, Items 2041 to 2052 within box 72.3 in a brown folder marked "PMTT" in red pencil.trams, tramways, pmtt, malvern, routes, track, kew depot, burke rd, surveys, victoria st, whitehorse rd, malvern depot, st kilda, candy corner

This cream and green patterned vest is said to have been made for William Herbert Teal as part of his "trouseau" on the occasion of his marriage to Daisy Edith Davis on April 14th 1916 at St. Peter's Church, Merino, Victoria, Australia. It is a handmade waistcoat but it is not known who made it. William Teal was born in 1889 to Elijah Teal and Isabella Campbell Reid in Camperdown, Victoria and after marrying, William and Daisy also lived (and worked as farmers) in the Camperdown area. They had seven children. Daisy died in 1962 and William died in 1975. A wedding portrait of William and Daisy shows William wearing a dark suit consisting of a single breasted coat, trousers, good shoes, gloves and a shirt with a stiff, high collar, however if he is wearing this vest, it is unfortunately hidden under his coat. Although by 1916, men's "ready to wear" clothing were widely available, this waistcoat was handmade (possibly by his mother or sister or future wife) and has been preserved by his family for almost one hundred years. Men's suits in the early part of the twentieth century were predomininantly three piece, consisting of a jacket, vest ( or waistcoat) and trousers made from matching fabrics. On special occasions (such as a marriage) the groom might also wear gloves and have a flower in his buttonhole. Some men liked to wear a watch attached to their waistcoat with a fob chain.This item is of significance as a rare example of a man's vest that was made for a special occasion (William Teal's marriage in 1916) and preserved by his family for several generations.Man's handmade vest with a green and cream patterned brocade front, trimmed with green cord around the edges and featuring four inset pockets (also trimmed with the green cord). It has six buttonholes down the left front edge (plus a hand embroidered buttonhole to hold a fob chain) and six corresponding holes for shank buttons (which are missing) down the right front edge. The back and lining are made from cream cotton fabric. The back has a centre seam and a strap with a metal buckle with prongs (to allow for adjusting the length). The cream lining and back display some discolouration and brown marks.flagstaff hill maritime museum and village, great ocean road, warrnambool, camperdown, merino, teal family, william herbert teal, daisy teal, daisy davis, waistcoat, man's waistcoat, vest, wedding, handmade vest, wedding clothes

The barge 'Ada' was built in Echuca in 1899. It was 33 metres in length and 6.9 metres wide and was made from timber and iron. It's design was unique as it was half-timber, and half-iron- the iron featured above the water line to prevent the wool bales from getting wet. The 'Ada' was used to carry wool from sheep stations on the Murray and Murrumbidgee Rivers down to Echuca Wharf for distribution around the world. The Permewan Wright, Murray Shipping Company, owned the 'Ada' and in the1930s the barge was sold to the Evans family who used it to transport timber to it's Echuca sawmill. The 'Ada' was purchased by the Port of Echuca in 1974 and is seen here on the Moama slipway undergoing restoration for Port of Echuca in 1979 to 1980. The remains of the 'Ada' still lie on the banks of the Moama slipway but it has fallen into near complete disrepair.The barge 'Ada' is very significant due to the uniqueness of her design. The hull is timber, up to the water line, then iron from the water line up to protect the bales of wool bales that it transports from water damage. The P.S Pevensey, within the Port of Echuca collection, has the same design feature.The barge 'Ada' in dry dock, on a slipway with a 4 knot marine sign is next to it. The barge is surrounded by trees and has since fallen into disrepair. Verso: 'Ada Barge'murrumbidgee river, wool, ada, murray river, barges, evans saw mills, timber industry, port of echuca, echuca wharf, permewan wright co.

Description by Elders Real Estate: A Beautiful Studio Residence: The Barn at Kinloch Gardens Eltham's prestigious Private Country Estate A special part of Eltham's heritage. Beautifully situated on grounds of 1750 square metres with panoramic views, this dramatic building on three levels is converted to a ? office residence from the original farm house of the Kinloch Estate. The main level, 21 metres in length, is a soaring galleried space of 17 squares of flexible living and working areas, extensive storage spaces and private courtyard. Centrally located within Kinloch's landscaped grounds. The Barn is a romantic focal point of a unique enclave of ten contemporary house designed by Graeme Gunn and Ian Jelbart, the cultural mix of old and new confirms the value and reputation of this exclusive private estate. Digital file only; created from scan undertaken by EDHS of item on loanarthur street, elders real estate, eltham, houses, jelbart property, kinloch gardens, real estate agent, the barn, woodridge estate

A test tube, also known as a culture tube or sample tube, is a common piece of laboratory glassware consisting of a finger-like length of glass or clear plastic tubing, open at the top, usually with a rounded U-shaped bottom. Test tubes are widely used by pharmacists to hold, mix, or heat small quantities of solid or liquid chemicals, especially for qualitative experiments and assays. Their round bottom and straight sides minimize mass loss when pouring, make them easier to clean, and allow convenient monitoring of the contents. The long, narrow neck slows down the spreading of vapours and gases to the environment. Test tubes are usually held in special-purpose racks. Culture tubes for biology are usually made of clear plastic (such as polystyrene or polypropylene) by injection moulding and are often discarded after use.A clear plastic test tubepharmacy, test tubes, plastic, culture test tubes, moorabbin, bentleigh, cheltenham, polypropylene, laboratories

Water fountain on private property Newsletter No., 228, June 2016 Heritage Excursion – Back-track walk to Fitzsimons Lane – Saturday 2nd July Our July heritage excursion will be a walk to Yarra Hill Close and Fitzsimons Lane Bridge, based on the story on pages 3 and 4. Although the route is close to Fitzsimons Lane it will follow streets and paths that may not be familiar to many local residents. It will include commentary on the history of this corner of the Town of Eltham. This walk on Saturday 2nd July will follow a “there and back” route, that is returning over much the same course. It is about 2.5 km in length and will take 2 to 2.5 hours. It includes some hills. It will start at 2pm at the corner of Bolton Street and Old Eltham Road (Melway ref.21 F10).Born Digitalelection day, heritage excursion, activities, eltham district historical society, fitzsimons lane, water fountain

Red Public Phone Box now held privately Newsletter No., 228, June 2016 Heritage Excursion – Back-track walk to Fitzsimons Lane – Saturday 2nd July Our July heritage excursion will be a walk to Yarra Hill Close and Fitzsimons Lane Bridge, based on the story on pages 3 and 4. Although the route is close to Fitzsimons Lane it will follow streets and paths that may not be familiar to many local residents. It will include commentary on the history of this corner of the Town of Eltham. This walk on Saturday 2nd July will follow a “there and back” route, that is returning over much the same course. It is about 2.5 km in length and will take 2 to 2.5 hours. It includes some hills. It will start at 2pm at the corner of Bolton Street and Old Eltham Road (Melway ref.21 F10).Born Digitalelection day, heritage excursion, activities, eltham district historical society, fitzsimons lane, telephone, telephone box

Red public phone now out of use and in private hands. Newsletter No., 228, June 2016 Heritage Excursion – Back-track walk to Fitzsimons Lane – Saturday 2nd July Our July heritage excursion will be a walk to Yarra Hill Close and Fitzsimons Lane Bridge, based on the story on pages 3 and 4. Although the route is close to Fitzsimons Lane it will follow streets and paths that may not be familiar to many local residents. It will include commentary on the history of this corner of the Town of Eltham. This walk on Saturday 2nd July will follow a “there and back” route, that is returning over much the same course. It is about 2.5 km in length and will take 2 to 2.5 hours. It includes some hills. It will start at 2pm at the corner of Bolton Street and Old Eltham Road (Melway ref.21 F10).Born Digitalelection day, heritage excursion, activities, eltham district historical society, fitzsimons lane, telephone

20th C and probably earlier families could make this simple 'knitting machine' by using a piece of round, hollow wood and knocking 4 nails into one end of the cylinder leaving a protrusion of 2cm. An empty cotton reel was commonly used with left over knitting wool. Children were taught to wind the wool around the nails in loops, figure of 8 and other patterns so that a chain was made which gradually protruded through the base of the cylinder as a knitted chain. The chains could be made to any length and then sewn together to make a usable object eg face washer.Gladys Reed was a member of the Ormond Choral Society c 1950. who performed plays and musicals the City of Moorabbin and she was skilled in hand knitting, crochet and dressmakingGladys Reed was a member of the Ormond Choral Society c 1950. who performed plays and musicals in the City of Moorabbin and this Doll was made and used by her family.c1950A small piece of painted, carved wood with central hollow and 4 nails on top used for making/ knitting a woollen chain.Painted doll featuresknitting, clothing, haberdashery, crochet, doilies, brighton, moorabbin, pioneers, dressmaking, market gardeners, early settlers, craftwork , bentleigh, lacework, moorabbin shire, reed gladys, dairy farms, fruit orchards

Whilst my main focus for the artwork design was on the Hotels on Main Road, I felt there was an opportunity to tell a broader story of Main Rd and combine/include some interesting pieces of information from many stages of the history of Main Road. Considering that at one point in time there would have been at more than six hotels in this very short section of street….there’s no doubt Main Rd was an epicentre of communication and festivities for the Goldfields of Ballarat. “No matter what luck he had, every miner needed supplies, food and something to entertain him when he was not searching for gold.” Described as being an overcrowded jumble of muddy streets loosely arranged around mining camps...and loud, muddy, colourful and sometimes illicit. I wanted the artwork composition to consist of overlapping images and text to reflect this sense of hustle and bustle. Main Road Mural tells the broader story of the history of Main Road in Ballarat. In 2018, the City of Ballarat commissioned local Ballarat artist Travis Price to create an artwork to align with the Main Road Revitalisation Project and deliver a key component of the storytelling (heritage interpretation) project that spans the length of the shopping precinct. The artwork is featured on a prominent site in the shopping precinct of main road and tells the story of Main Road through depicting key timeline events. Main Road, as its name suggests, was one of the main entries to the mining areas of East Ballarat. It had several names: Main Street before 1858, Plank Road between 1858 and 1868 and Main Road from 1868 onwards. The centre of mining life, it was crowded, prosperous, raucous and dirty. Painted mural on shop wall in Main Road, BallaratBallaarat, Gold Fever, The Royal Standard Hotel, Flood, Boxing Saloon, Plank Road, Kulin Nation, 3350, Election, East, Grog House, The Scandinavian Hotel. Images; Chinese lantern, Pick & Shovel, Miners Licence burning.main road history, ballarat hotels, gold fever, wadawurrung, kulin nation

Weaving is the interlacing of two yarns, one at right angles to the other. Yarns that run the length of the fabric are called the warp. Yarns that run across the fabric are called the weft. Most woven fabrics are produced on a loom. The warp yarns are raised to form an opening - the shed. The weft carrier, usually the shuttle, shoots through the shed. Then the warp yarns change position up and down. Finally, the weft is pushed tight against the previous yarns, gradually building up the fabric. Hattersley treadle loom (revolving box hand loom). Beam of loom was removed and sent to Foster Valley Mill in 1989 to be returned via Tom Crocker. The National Wool Museum gratefully acknowledges the contribution of Mr Fred Murgatroyd & Mr Bernard Tolan in making this Hattersley Loom Operational. Green painted Hattersley treadle loom (revolving box hand loom).weaving, george hattersley and sons ltd, weaving machinery, wool processing, loom, restoration

The Stinson L - 5 Sentinel was a World War 11- era liaison aircraft used by the United States Army Air Forces, U.S Army Ground Forces, U>S Marine Corps and the British Royal Air Force. It was produced by the Stinson Division of the Vultee Aircraft Company (Consolidated - Vultee from mid- 1943). Capable of operating from short unimproved airstrips the L - 5 Sentinel delivered personnel, intelligence, and supplies to the front line. On return flights it carried wounded soldiers who were evacuated to rear area field hospitals for treatment. The L - 5 carried a pilot and observer. It had a length of 24.1 feet, wingspan of 34 feet, It had a maximum speed of 130 mph, a cruise speed of 100 mph with a range of 375 miles.The L - 5 was a significant asset to the allied war effort.Wooden propeller from Lycoming engine, with photograph of aircraft. Stinson L 5 Sentinal reconnaissance plane used in Korea and Vietnam. Propeller displayed from a similar plane.

Kawarren was an early timber and limestone loading point. Timber was shipped in by Watson and Facey, Condon Brothers, and Coppock, amongst others, some of which had tramways up to 6.5 km long to the station. Bushfires roared through the area in 1939 and made the area unworkable. An outcrop of limestone existed near Kawarren but it was not until the railway was built that it became workable. 360 metres north of Kawarren station two then three kilns were erected, and later a shed and covered area over a short length of the rail siding in order to prevent rain damage to the lime while it was being loaded. Sluicing was introduced, and the tramway was extended further when the quarry ate deeper into the hillside. Limestone traffic of around 2,000 tonnes each year kept the station busy until the trade ceased in 1957.B/W. On the 14 December 1958 at Kawarren an UP goods train shunts on the siding. A man is talking to the engine driver while another man approaches the engine.kawarren; railways; timber; lime;

Prior to 1901, sailing pilot cruising cutters were "Boomerang", "Corsair", "Anonyma", "Proserpine", "Rip", "Mavis" and "Hawk". In 1901 the pilots took delivery of their first steam powered pilot cutter, "Victoria", 46 metres in length, built at Williamstown. "Victoria" was followed by "Alvina", "Akuna", "Akuna II" and in 1953, "Wyuna", a twin-screw diesel electric pilot cutter 63 metres long. "Wyuna" served until November 1979 and was then sold to the new Nautical College at Launceston for use as a training ship. The system for getting pilots on and off ships at sea was for the ship to stop dead in the water with the wind and sea broad on the beam. The pilot cutter would round the ship's stern, manoeuvre into the lee and lower the 18ft. workboat which, with a crew of two, transferred the pilots to and from their ships.Chief Officer's Log Bok from SS Victoria from June 1930 to June 1931log book, port phillip sea pilots, ss victoria

Gives details for each tram at that time, where from, date of purchase, New or second hand (all ), Straight or drop sill or drop centre, Body builder, Seating capacity, overall length, overall height, overall width, Lightning arrester, controller make and type, Truck Maker and type, type of truck, axle type, wheel diameters, wheel base, axle diameter, motors type and maker, Motor horsepower, Gear Teeth, Air compressor make and type, Brake Valves make and type, Governor make and type, Weight in tons and whether suitable for one man operation. Side list gives details of abbreviations, list of tram types and note on Birney 15. List of trams include "Cleaner Car". Undated. See item 3430 for Ballarat version and 8721 and 8722.Yields detailed information about Bendigo trams -c1964Dyeline print from a typed list.2nd copy has in ink "BTPS 613" in the top right hand corner.tramcars, bendigo, equipment, lists, data

This hand drawn map shows the Gully Chair, Summit Tow and the Village Tow. It also highlights the Nursery Poma. Several buildings can be seen along with the Visitor Centre in the Gully carpark, Skyline can can be seen adjacent to the Gully Chair. The Sun Valley T-Bar was designed by Ron McCallum and began operation in 1967. It had a length of 826 metres and an elevation of approximately 200 metres. In 1989 the Sun Valley T-Bar was replaced by the Scott Quad. Ron McCallum was a founder of Alpine Developments. It appears that his first lift was the Skyline portable tow at Falls Creek in 1954. As an engineer, he went on to build about 20 chairlifts and T-bars in the 1960s and early 1970s including at least five at Falls Creek. This map is significant because it shows plans for the development of a major tow at Falls Creek in the 1960s.A framed black and white concept map for the proposed new lift in Sun Valley, Falls Creek.sun valley tow, ron mccallum, falls creek tows

Roderick William Mills, known as Saltbush Bill, was the inspiration for several poems by A.B. Paterson. Born at Balnarring in 1869, Mills earned the title of Saltbush Bill whilst working on a cattle station in Queensland. On these long droving trips, he learnt the art of cracking stock whips of many different lengths and sizes, a skill that earnt him £100 after a Melbourne saddler, J.K. Jennings, suggested that no man could crack a 65-foot stock whip in three tries. Saltbush Bill succeeded on his first attempt and decided to make a career in entertainment with his skill. Over his career he performed for royalty, travelled and performed extensively overseas and lent his skill to fundraising efforts, particularly during the war. His last concert was given in the Boomerang Hall in Dandenong in 1926.A local resident of the City of Moorabbin, Saltbush Bill was an ambassador for Australia and a literary inspiration to A.B. (Banjo) Paterson. Saltbush Bill, his wife Hannah Louise Porter and their 11 children lived in Old Dandenong Road, Heatherton, where Saltbush Bill and Hannah conducted a market garden for many years. Saltbush Bill is buried in Cheltenham's Pioneer Cemetery.Black and white digital imageheatherton, banjo paterson, saltbush bill, stock whip, entertainment

An unattributed report dated 18/04/1972 to be read in conjunction with Cat. No. 01670. The report gives details of the situation at that date and projected changes to the functions of the residences, occupancy rates, costs and likely trends in accommodation needs. It explores at length auxiliary and alternate accommodation such as the Salvation Army, YMCA, YWCA and church hostels, before offering future options: (i) to carry on using Harelands, Stanhope and Blamey House without change, (ii) move working girls and boys to YWCA/church hostel or YMCA/church hostel, converting Stanhope to a co-ed residence for over 14s attending school, maintaining Harelands as a co-ed residence for under 14s, and releasing Blamey House. These changes to take place when the number of residents over the age of 14 falls below 34 in two consecutive years.Part of the history of Melbourne Legacy's involvement with residential care for children.White foolscap paper x 6 pages, with black type. Two holes punched for filing, and 2 add-ins. Page 1: Handwritten in pencil: 'Discussed with J. Chancellor 18/4/72', 'DRAFT 18/4/72 see later Draft 19/4', under Occupancy '74' is circled and '72' written next to it. Handwritten in blue biro: '(This report has been updated under the heading of Occupancy to include 1971 figures)', '(a) Junior Legatees' added under 3. Page 2: Handwritten in blue biro: '(b) Costs of Maintaining Residences added under #3, 'ER' added in pencil to 'high' near bottom of page. Page 3: Handwritten in pencil: 'should' changed to 'could' on line 4, lines 5-8 annotated 're other organisations', 'gratified' changed to 'qualified' in blue biro half way down the page. Page 4: figures for apprentices and total pencilled into table and two pencilled lines have been added to para 4. Page 5: 'There being approximately 15 under 18 years' in blue biro inserted in Line 13. Page 6: 'Insert 7' pencilled in front of '7.', which is changed to '8'. Page 7: '8' changed to 9 in pencil, 'problem cases' written at the end, and '(over the age of 14)' inserted in blue biro on the penultimate line. 01672(8): in blue ink: 'members' changed to 'numbers', and 'fill' changed to 'fell'.residences, review, blamey house, harelands, stanhope

This is a study of Melbourne Legacy by the author William Paul Healy, from April 1973 to March 1975. The author was interested because of the reputation gained by Legacy over the preceding 50 years, for successfully delivering welfare services by volunteers to widows and their dependant children. He titled it 'The Task-Focused Volunteer: An Evaluation of the Work of the Legacy Club of Melbourne'. The aim of the study was to describe, analyse, explain and evaluate the work of Legacy. This has been done at great length and in summary the great value of Legacy is in the continuity of a Legatee with the one family i.e. the legatee maintained contact with the family through school, beginning work/university and other milestones in the life of a dependant family. It was thought that families in receipt of Legacy services functioned at a higher level than those who do not receive such services.Significant in that Legacy was seen as providing a high quality service. Some of the effectiveness seems to derive from the ease at which the legatee is able to establish a relationship with the family.White A4 paper pages with black type x 186 pages held together by two foolscap cardboard leaves.objectives, goals, activities

Thomas Walker & Son was internationally renowned in the manufacturing of ships logs. Founding father Thomas Walker (1805–1871), an engineer in Birmingham, patented a mechanical log in 1878 which was a recording instrument that attached to a rail at the stern of a vessel connected by a long cord with a rotor which was towed behind the ship. The instrument dial recorded the distance travelled. Thomas Walker first went into business to manufacture stoves at 58 Oxford Street Birmingham. Walker’s self-feeding stove was widely lauded at the Paris Exhibition of 1855, winning a prize medal and kick starting the first of many notable innovations for the Walker family's manufacturing business. However, it wasn’t until working on an earlier ships log model invented by his Uncle that Thomas Walker became interested in the further development of this device, used to ascertain a ship’s speed. Walker continued to improve on the common log for the company of Massey & Sons and these improvements were deemed revolutionary. This log became a firm favourite of the West India Association (British-based organisation promoting ties and trade with the British Caribbean) and the most common log in use for two generations. It took till 1861 for Thomas Walker and his son, Thomas Ferdinand Walker (1831-1921) to patent the first Walker log of many. Together, with the introduction of the A1 Harpoon Log two years later, they established the Walker Log Business as a force to be reckoned with. By the time of his passing in 1871, Thomas Walker Snr had not only founded a family business with considerable staying power but also instilled a tradition of public service. Having sat as a representative on the Birmingham Town Council for 15 years and played an active role in public works, he was soon given the nickname of ‘Blue Brick Walker’. Much like his father, Thomas Ferdinand Walker changed the face of the maritime industry. His patent of 1897, the ‘Cherub’ log, was a notable departure from the past providing a far more accurate reading and replacing the majority of logs of the age. They were the first to produce an electric log and the Walker factory was one of the first to introduce the 48 hour work week for employees. This ship log was invented and made by a significant marine instrument maker and innovator of machinery. It demonstrates the huge leap taken to improve navigational accuracy at sea with an instrument that was in use for decades. Ship Log, three analogue dials calibrated in increments of Miles, the Rocket Log is a nautical instrument for measuring a vessel’s speed and distance traveled. The floating log was drawn behind the ship over a fixed time period in order to measure the distance traveled. The counter could measure enough miles to cover the maximum distance traveled by a ship in one day. The log has two distinct parts; a brass register, made by Walker, showing the distance recorded and the rotator made by Reynolds, that spins in the water driving the counter. both parts are connected by a linked chain. The register has a cylindrical brass body approx 4.5 cm diameter containing registering mechanism with hardened steel bearings. Distance is indicated by the three pointers on enamel plate as follows: graduated every 10 miles from 0-100; every mile from 1-10; every 1/4 mile from 1/4 -1. A brass sling and eye secured to the body enables it to be attached to the taffrail. The original rotator would have had a cylindrical tapered wooden body, approx 4.5 cm in diameter with three metal alloy fins or could be all made from brass. A towing eye is fitted to the tapered end. The two pieces of apparatus are connected by a length of linked chain, length 22.9 cm."Walkers Rocket Ship-Log Birmingham (Patented)" printed on face-plate. "Made by Thomas Walker".flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, ship log, rocket log, mechanical ship log, measuring instrument, marine instrument, nautical instrument, speed recording instrument, ship log register, walker ship log, walkers rocket ship-log, thomas walker, thomas walker & son, thomas ferdinand walker, walker log business, reynolds ship log rotor, taffrail log, taff rail log, west india association

BHS CollectionSage coloured silk long sleeved dress. One piece full length dress. Full length side panels from shoulder to hem. Front of bodice extends below waist line to form two points on either side of front opening. Front opening is fastened with twelve fabric buttons (1-5cm) and button holes. Small standup collar(3cm) fastened at throat with hook and eye. Bodice shaped with two darts on either side of front opening. Small ruched pocket on LHS of bodice at waist level. Long narrow fitted sleeves shaped at the elbow. Decorative cuffs at wrists of ruched frilling (8cm) with triangularturned flap on top edge at back of cuff. Back of dress has four panels. The two centre panels extend below waist to to two points. The centre skirt panel is attached under the centre two panels and is gathered by five deep pleats to form a bustle effect extending to a long train. Front centre panel has horizontal gathering with ruched frills in centre, and at sides. Side panels overlap front centre panel. Hemline has pleated frill above the hem which is finished with cord. Skirt is lined with an open weave, brown cotton fabric. Bodice is lined with brown polished cotton. Hand stitched and machine stitched.costume, female, sage coloured silk dress

A rectangular Coloured Print of a group of Boeing B.17F's Boeing B.17F Flying Fortresses of the 91st Bombardment Group, United States 8th Air Force leave vapour trails in the morning sky as they head eastward from their base at Bassingbourn, Cambridgeshire, England, May 1943. The foreground aircraft, 229536 (LL-A) of the 401st Bomb SQN. is named "Mary Ruth"- Memories of mobile. Behind her is "Stric Nine, 229475 (OR-R) of the 322nd Bomb SQN. Power Plant: Four Wright R1820-97 nine cylinder air cooled radial engines. Each turbo-supercharged. Dimensions: Span 103ft 9in, Length: 74ft 9in, Height: 19ft 1in.