This post drill press has been made by Melbourne business, Dawn Manufacturing Company. It can be operated manually or by a pulley driven flywheel, with the aid of an engine connected to a power supply. In the late 1800s early 1900s a drill press like this would have been driven by steam from a boiler, the main power source for manufacturer’s power at that time. Dawn’s Golden Anniversary 1917-1967 Catalogue describes this model 611 drill as … “Ruggedly constructed with accurately reamed bearings. The coupling between the main spindle and feed screw engages the full circumference of the spindle, and embraces a ball-bearing thrust race. The pillar, as in all “Dawn Drilling Machines” is a solid bright steel bar, in place of the usual light tubing. Adjustable automatic feed.” And “F. & l. Pulleys extra, if required”. DAWN MANUFACTURING CO. The Dawn Manufacturing Co. was founded in Coburg, Melbourne, in 1917 by the four Blake brothers, who were all engineers. After World War I Dawn was supplying drills Australia wide and the company was growing at a healthy rate. During the depression they remained busy, with employees working 60-80 hour weeks. Dawn was contracted to supply vices and clamps to the Australian Defence Department and munitions factory during the World War II. - 1959 the company was taken over by G.N. Raymond Group. - 1967 the Dawn Manufacturing Co. had distributors in Australia and overseas, including USA, Canada, New Zealand, Asia and the Middle East. - 1973 the Siddons Ramset Limited acquired Dawn. - December 1991, Dawn became a unit of the United States owned Stanley Works Pty. Ltd. - November 1998 Dawn became 100 per cent Australian owned. The drill is a typical tool of a blacksmith, cart wright, wheelwright and garage business. It is an example of the tools of the blacksmiths’ trade in Victoria in the early to mid-20th century.Post type drill press machine with gear driven flywheel. Drill press is attached to a post and is fitted with a pulley belt and will run at a speed of maxim 200 r.p.m. The machine can also be manually operated. It has an aperture in the centre, a chuck, for the drill bit and has two metal handles at the centre, on the right hand side. Gear ratio 2:1 main drive, 6" diam, 3:1 reduction gear. Made by Dawn of Melbourne, Australia. Model No. 611, Code No. 9157"DAWN MFG COY”, “MELB. AUSTRALIA", " 611"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, blacksmiths, blacksmith’s drill, blacksmith tools, dawn drill model no. 611, dawn drill code no. 9157, dawn manufacturing coy melbourne, dawn manufacturing coy coburg, dawn post drill, drilling machine, drill with gear driven flywheel, forging tool, metal working tool, post drill, steam powered drill, trade tool, warrnambool district 1900s

This Eclipse model, treadle operated sewing machine was made by the Oldham Sewing Machine Company in Greater Manchester U.K.. It was used by sailmakers for sewing sails with box shape top and slim neck. Sewing machine, foot treadle, for sewing sails with box shape top and slim neck. Brand is Eclipse. Cast iron base is bolted to square wooden table-top with drawer under table. Drawer has 3 partitions and wood fitting with 5 drilled holes for needle storage, lock has diamond shaped, decorative metal surrounds; half of inside drawer is painted black. Decorative metal stand, painted green, with 2 foot pedals; 1 foot pedal drives the wheel wheel. Padals both have "ECLIPSE" cast into the iron.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, textile machines, sailmaker's machine, maritime sewing machine

The article celebrates Walter Burley Griffin and the impact he has had on Australian architects. Boyd calls Griffin 'America's greatest ever export to Australia after the T-model Ford'.Original manuscript for an article published in "Australia" (Los Angeles), Vol.2, August – October 1964, pp.13-15.Typewritten (c copy), quarto, 6 pages. (Four copies)american influence, walter burley griffin, capitol theatre, canberra, robin boyd, manuscript

This display shows 12 examples of Stegbar windowalls in Robin Boyd designed homes. This model was created for the House of Ideas exhibition, made by a University of Melbourne, Melbourne School of Design, Masters student.Timber base with slots for 12 examples of use of Stegbar windowalls in Robin Boyd designed homes.walsh st, robin boyd

CLUNES HAS HAD A HOSPITAL SINCE LAST CENTURY. RE-MODELLED IN 1937 - BURNT IN BUSHFIRE IN 1944. NEW BUILDING AND SITE BUILT IN 1947. NOW USED AS COMMUNITY HEALTH CENTRE.BLACK AND WHITE PHOTOGRAPH OF "NEW" CLUNES HOSPITAL ON SERVICE STREET, CLUNES. LIGHT POLE IN FOREGROUND - LARGE ELM TREE TO LEFT. SHRUBS IN GARDEN BEHIND FRONT BRICK FENCE.local history, photography, photographs, hospital

Students and teachers celebrating Pesach/Passover with a Model Seder, 1976. The General Secretary of the Zionist Federation is the guest featured in I/00886.4. Please contact [email protected] to request access to this record.1970s, celebration, judaism, event

Released around 1970 by the Royal Australian Air Force. A manual for part model or type no B99-26-203 and B99-26-204 valve, fuel cut out type 16.royal australian air force, valve and fuel cut out type 16, australian air publication

Victorian government signs $1.85 billion with French manufacturer Alstom to build 100 trams in Melbourne. Trams to be known as G class and will replace some of A, B and Z models with higher floors. Yields information about the contract for the next Generation of Melbourne trams - G classNewspaper clipping from the Age titled: "Andrews defends higher cost of new trams"trams, tramways, new trams, alstom, g class tram

Electric Motor driven automotive horns were commonly used from circa 1915 to circa 1935 on cars, trucks and some tractors They make a distinctive deep and loud 'Ahooga' growl sound. Commonly used on American made automobiles, but also on a few European makes.Car horn: 'North East Electric Co' Electric Motor Driven , 12 Volt made by North East Electric Company of Rochester, New Jersey, U.S.A. 1920's When horn button, usually on top of steering wheel, is pressed, the current activates the motor, which turns on a toothed ratchet, producing a 'Ahooga' sound, which is greatly magnified through the trumpet at the front.Brass badge, acid etched: "North East Electric Co./ Rochester, New Jersey/Pat Pen/Model X/Volt 12/Serial No"; with 'North east Electric' logo on leftcar horn, vintage car horn, klaxon horn, motor driven horn

"Pioneer" chainsaw with green housing. Pull start, no chain. Compliance plate on back (see Below) second plate on top.Compliance plate on back "Pioneer Saws / Model / 450 / Serial No. A10778 / Division of Outboard Marine Australia Pty. Ltd. / Bankstown NSW". Cast in relief on side "Pioneer & Pine Trees".machinery, wood cutting

In 1867 the Singer Company decided that the demand for their sewing machines in the UK was sufficiently high to open a local factory. Glasgow was selected for its iron-making industries, cheap labour, and possibly because at the time the General Manager of the US Singer Sewing Machine Company was George McKenzie, who was of Scottish descent. The company obtained a lease on land near Queen Street Station and machinery and machine parts were shipped over from the US. Demand for sewing machines outstripped production at the new plant and by 1873 a new larger factory was completed near Bridgeton Cross. By now Singer employed over 2,000 people in Scotland but still, they could not produce enough machines. In 1882 George McKenzie, the soon to become President of the Singer Sewing Machine Company undertook the ground breaking ceremony on 46 acres of farmland at Kilbowie, Clydebank and the largest Singer factory in the world started to be built. Originally two main buildings were constructed. Built above the middle wing of the factory was a huge clock tower with the 'Singer' name displayed for all to see from miles around. Many miles of railway lines were laid throughout the factory to connect the different departments and to aid in the shipping of their goods. Railway lines from the factory connected Glasgow, Dumbarton, and Helensburgh stations. The factory was regarded as the most modern facility in Europe at that time. As different departments in the factory were completed, the workers moved from the old sites to the new one at Kilbowie and the factory was finally finished in 1885. With nearly a million square feet of space and almost 7,000 employees producing on average 13,000 machines a week, making it the largest sewing machine factory in the world. The Clydebank factory was so productive that in 1905 the US Singer Company set up the Singer Manufacturing Company Ltd. as a UK registered company. The invention of the sewing machine had several very significant impacts on the lives of many people. It changed the domestic life of many women as more households began to own sewing machines, women as the ones who traditionally stayed home to do chores including making and repairing clothing, found themselves with more free time. Previously several days a week would be dedicated to sewing clothing for herself and her family, a housewife could now complete her sewing in merely several hours, allowing for more free time to pursue hobbies and attain new skills. Sewing and clothing production, in general, became more industrialized activities, taking place less in the home and more in large factories. Industrial sewing machines, in combination with the cotton gin, the spinning jenny, and the steam engine, made clothing production much easier and much cheaper. Singer sewing machine treadle type wooden stand with six drawers plus instruction manual Lotus decoration to machinewarrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, sewing-machine, clothes repair, singer sewing machine

The Kiewa Hydro Electric Scheme (KHES) produced electricity for the people living in the Kiewa Valley and beyond to many parts of Victoria. The people and their families working on the Kiewa Hydro Electric Scheme were encouraged by their employer the State Electricity Commission of Victoria to purchase and use electrical appliances. The iron was popular as it was quick and easy compared to those used previously. This iron belonged to Ron White who was a senior member of staff during the construction and operation of the KHES.This iron was owned by Ron White. Ron was appointed Area Operations Engineer at Kiewa in June 1956. He was later appointed as General Superintendent and then in 1974 appointed to principal Hydro Engineer of the recently titled Hydro Division.Electric iron with long cord attached at the side toward the back. Iron shape is of an oblong with pointy front. When laid down, the black handle is at the top with a red button centre front (to choose between steam and dry). Under the handle is the 'turntable' (used to select type of material/heat). At the front of the black is an outlet for the steam. Beneath the black section is the metal shiny cover and solid base.Dial (turntable) - centre red with 'Hoover' and red section on outside with 'steam'. To the left of 'steam' is 'High, Linen, Cotton, Wool'. To the right of 'steam' is 'silk, rayon, nylon'. On the handle at the front "Hoover" in gold.electric appliances; steam iron; electric iron; laundry; ron white; kiewa hydro electric scheme; hoover industries.

The Kiewa Hydro Electric Scheme (KHES) produced electricity for the people living in the Kiewa Valley and beyond to many parts of Victoria. The people and their families working on the scheme were encouraged by their employer the State Electricity Commission of Victoria to purchase and use electrical appliances. The iron was popular as it was quick and easy compared to those used previously. This iron belonged to Ron White who was a senior member of staff during the construction and operation of the KHES.This iron was owned by Ron White who was appointed Area Operations Engineer Kiewa in June 1956. He was later appointed General Superintendent and then, in 1974, he was appointed Principal Hydro Engineer of the recently titled Hydro Division.Rectangular yellow and black cardboard box with 'complete' fitting lid. Red and black writing on all sides except the bottom. staples used to hold down the sides of the lid.Front of box - New Revolutionary / Dry/ It steam irons/ it damps as it irons!/ It dry irons too! Back of box - Hoover Steam or Dry Iron Side of box - New Revolutionary / Hoover/ Steam or dry/ Iron / Made By/ Hoover Industries Pty Ltd Meadowbank NSW Top of box has sketch of dial "Big Safety Set Dial" - with black backgroundelectric iron; steam iron; hoover industries; ron white; laundry; kiewa hydro electric scheme

The design of this item is associated to what was "first described by Professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969. The manufacturer of this blade is the Boots UK Limited pharmacy company, they apparently had a branch in Australia to distribute their medical and pharmaceutical equipment and part of them was focused on the manufacturing of laryngoscopes blades. The Boots company reproduced this trending design used in the anaesthetic practice. URL Reference: https://en.wikipedia.org/wiki/Boots_UK / https://en.wikipedia.org/wiki/Alliance_Boots Macintosh semi curved blade designed in a baby size, without light bulb attached. Minor scratches and some slight hit marks over the piece surface caused by its previous use. It has the manufacturer name and brand and the place where it was made at the back of the blade base.Stamped at the blade back base area, BOOTS AUSTRALIA / MADE IN ENGLANDmacintosh, blade, boots australia, boots uk limited, england blade

Large printed timetable for Technical School examinations in 1901. Subjects included Chemistry, Geology, Asssaying, Hydraulics, Agriculture, Engineering , Mine Surveying, Algebra, Mineralogy, petrology, Botany, Trigonometry, Euclid, Land Surveying, Steam and gas Engines, Applied Mechanics, Drawing, painting, engineering drawing, building construction, architecture, drapery, modelled design, casting clay models, composition of form and colour, Lettering, Wood Carving, historic ornament, Wood Carving. .1) Trade Subjects .2) Other subjects, including artexaminations, technical schools, trades, art, technical art school, timetable, clay modelling, ceramics

An Andreef 'Speedshaft' tennis racquet with large open throat. Plastic whipping and reinforcements around shoulders. Nylon whipping around base of throat. Handle grip and butt cloth. Model name painted across throat on both sides of racquet. Decal stating 'AA" on shaft on reverse. Endorsement: 'FRANK L. KOVACS 2ND/PERSONAL MODEL' painted onto shaft on obverse. Painted on crown on obverse: PLASTIC BOUND PAT. CONSTRUCTION. Materials: Wood, Lacquer, Metal, Glue, String, Ink, Leather, Plastic, Nylontennis

A Chemold Rod Laver Professional Model tennis racquet, with ribbon whipping around shoulders and shaft, and leather grip with floral perforations. Model name features across base of head and throat, accompanied by an 8-pointed star device. Chemold logo features along shaft. Gold, black and white Chemold trademark features on lower shaft. Plain white plastic butt cap. Materials: Wood, Nylon, String, Ribbon, Paint, Ink, Plastic, Leather, Rubber, Glue, Lacquer, Metal, Adhesive tapetennis

A Wright & Ditson 'Challenge' model tennis racquet with transitional flat-top head and laminated convex throat. String whipping around shoulders. Model name printed across throat on obverse. Manufacturer's trademark/logo features across throat on reverse. Fine-grooved octagonal handle with leather end wrap. Manufacturer name imprinted on right side of shaft. Inscribed on left side of shaft: PATENTED. Letters 'EWE' carved onto throat on reverse. Materials: Wood, Metal, Lacquer, Glue, Ink, Leather, Gut, Stringtennis

A Wright & Ditson 'Surprise' model tennis racquet. Throat wedge has marble laminate. Striped plastic tape around shoulders and base of throat. Model name printed across throat on obverse and manufacturer's trademark features on throat on reverse. Manufacturer name and country of origin printed on right side of shaft. Fine-grooved octagonal handle with leather end wrap. Pale green paint splashed along one side of head. Materials: Wood, Metal, Lacquer, Glue, Ink, Leather, Nylon, Paint, Plastic, Leathertennis

A Wright & Ditson 'Les Stoefen' model tennis racquet. String whipping around shoulders. On both sides of racquet, model name and manufactuer name printed across throat. Image of endorser featured on shaft on obverse. Name of manufacturer features on shaft on reverse. Handle spiral-wrapped with leather hand grip and has leather end wrap held with tacks. Manufacturer name and country of origin printed on left side of shaft. Materials: Wood, Metal, Lacquer, Glue, Ink, Leather, Nylon, Paint, Stringtennis

A Wright & Ditson 'Park' model tennis racquet. String whipping around shoulders and around base of throat. On both sides of racquet the model name and manufacturer name are printed across throat. Manufacturer's trademark features on the shaft on both obverse and reverse . Handle spiral-wrapped with leather hand grip. Butt cloth with manufacturer's trademark printed on it. Frame painted burgundy to half-way up the head. Materials: Wood, Metal, Lacquer, Glue, Ink, Leather, Nylon, String, Paint, Cloth, Plastictennis

A Spalding Top-Flite model tennis racquet, featuring whipping around shoulders and shaft, and wood grain finish on shaft & bottom section of head. Has leather wrapped handle and plastic butt cap. Manufacturer name features across base of head. Model name features across throat. On shaft is printed: 'SYNCHRO-POWER SHAFT'. Wreathed 'S' symbole features on lower shaft and on butt cap. Materials: Wood, Metal, Lacquer, Glue, Leather, Vinyl, Ink, String, Plastic, Adhesive tape, Painttennis

A Spalding 'W. T. Tilden' Cannon Ball model tennis racquet, featuring whipping around shoulders and shaft, an open throat, fine-grooved handle and leather end wrap & butt cloth. Model name features across base of head, on obverse. Manufacturer name features across base of head on reverse. Image of endorser appears on shaft on obverse, and decal signature appears on shaft on reverse. Manufactuer logo printed on butt cloth. Materials: Wood, Metal, Lacquer, Glue, Leather, Vinyl, Ink, Stringtennis

A Spalding 'Oval' model tennis racquet, featuring laminate convex throat, fine-grooved wooden handle, leather end wrap and leather butt cloth. Model name printed on throat on obverse, and manufacturer logo printed on throat on reverse. Manufacturer logo printed on butt cloth. Writing on side of shaft says: 'PATENTED/JAN 3. '05.'. Sticker on reverse throat states: 'WETHERBEE BROS./39 N. PRAIRIE ST./ GALESBURG, ILL.' Materials: Wood, Metal, Lacquer, Glue, Leather, Gut, Ink, Stringtennis

A Spalding 'Pancho Segura Autograph Model' wood tennis racquet. String whipping/ribbon reinforcements around shoulders and shaft. Model name printed across throat on obverse. Manufacturer's name printed on throat on obverse and reverse. Endorser's image printed on throat on obverse and reverse. Endorser's signature features along shaft on obverse and reverse. Grip wrapped with perforated leather. White butt cloth printed with large Spalding 'S" logo. Materials: Wood, Metal, Lacquer, Glue, Ink, Nylon, Paint, Plastic, Leather, Ribbontennis