A black and white photograph of the Taggerty Butter Factory in Victoria.A black and white photograph of the Taggerty Butter Factory in Victoria taken around 1904. The Taggerty Butter factory opened in 1892 in the township on the Little River. It was run by the Kennedy family and built by J.B. Coombs of Acheron Station. Coombs was later Shire President. Milk had been previously taken daily to the steam-driven separators at Thornton. Upper Thornton. The cream was separated and the remains were taken back to the farms for the pigs and calves. Before these town separators existed butter had been made at home in a barrel, salted, and stored. The operation at Taggerty ceased in 1908 and the Alexandra Dairy Company took over production. The building no longer exists but materials from the original Taggerty Butter factory building now form part of the Williamson house off Swamp Creek Road.taggerty, victoria, taggerty butter factory, little river, kennedy family, j b coombs, acheron station, thornton, upper thornton, alexandra dairy company, williamson, swamp creek road

Gun Sighting Telescope purported to be from J5 submarineGun Sighting TelescopeG.S.Telescope x 8 - 2179gun sighting telescope, g.s.telescope, j5

This 11 inch (28) Railway Gun was captured by the AIF in front of Harbonnieres near Villers Bretonneaux on the 8th of August 1918. It was one of the Guns used by the Germans to shell Amiens from a distance of 15 miles (24km) in an endeavor to destroy the railway centre in the city. However the destruction of the city was prevented by the advance of Allied Troops on the morning of 8th August when 5 Australian, 4 Canadian, 4 British and 9 French Divisions broke the German Front before Amiens./ The Barrel of the Great Gun, 41 feet (12,5m) long and weighing more than 45tons (45-80 tonnes), is exhibited at the Australian War Memorial in Canberra. More information can be found at www.Wikipedia/The Amiens Gun Two copied photos of the Amiens Gun (seperate Frames) and a history of the Amiens Gun in seperate frame.None on Photos, the history frame has a short history and "Presented by the Canberra Services Club 2003"ww1, gun, the, railway, amiens, harbonnieres, villers, bretonneaux

The second Orbost Butter Factory was based in Forest Road.The Orbost Butter and Produce Co. Ltd was registered on June 1st 1893 and was an important source of income to the Orbost district.A coloured photograph of a large white building - the Orbost Butter Factory.

Chinese copy of Russian dual compartment, round bottom oiler. Metal with two screw tops, and Chinese symbols for "gun oil" and "alkaline solvent"Chinese symbols for "gun oil" and "alkaline solvent"weapon oiler, chinese

A butter churn is a device used to convert cream into butter. This is done through a mechanical process, frequently via a pole inserted through the lid of the churn, or via a crank used to turn a rotating device inside the churn. The use of butter is mentioned in biblical works and the earliest butter churn vessels belonging to Beersheba culture in Israel were found in Bir Abu Matar going back to Chalcolithic period between 6500–5500 BC. The butter churn in Europe may have existed as early as the 6th century AD, In the European tradition, the butter churn was primarily a device used by women, and the churning of butter was an essential responsibility along with other household chores. In earlier traditions of butter making, nomadic cultures placed milk in skin bags and produced butter either by shaking the bag manually, or possibly by attaching the bag to a pack animal, and producing butter simply through the movement of the animal. An item used to make butter in a domestic situation by turning a handle until the cream inside has turned to butter.Butter churn, wooden, lid pieces screwed or nailed together. Brass bearing on side with iron turning handle.Handle marked 28204 no other marks to indicate manufacturer or date of productionflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, flagstaff hill maritime village, great ocean road, churn, butter churn, wooden churn, butter making, food, dairy, kitchen utensil

These unused labels would have been used at the Orbost Butter and Produce Factory.The Orbost Butter and Produce Co. Ltd was registered on June 1st 1893 and was an important source of income to the Orbost district.Large square white labels with red print - "ORBOST BUTTER".labels-orbost-butter commerce

Self propelled gun with blade to dig its own bund. Crew of seven. At rest, one soldier is with a map, one soldier is looking at a magazine, while another soldier is unpacking ammunition.Word PACHELBEL? appears on the gun barrelpachelbel, m-107, self propelled artillery, diorama

Scale model of the four mainarmament guns of H.M.V.S Cerberus.Miniature model of gun mounted on wood.Presented to H.M.A.S Cerberus Museum by CDRE J.S Dickson AM.MBE RAN Commanding Officer reunion H.M.A.S cerberus 8-9 october 1988.

Used domestically, though any extra butter would have been sold to neighbours. Many families kept a cow or two for milk etc. Cream needed to be at least 2 days old - the thicker the better. The handle was turned until the cream turned to butter,the whey was poured off and the butter washed in cold water until the water ran clear. Generally salt and bicarbonate of soda were added. Two pats were used to form butter into 1lb lots.This was used by Mrs (1890-1980) Carl Wehner who was the son of the blacksmith Herman Wehner. Wehner's Blacksmith's was founded at Orbost in 1889.Wooden "Cherry" butter churn with wood and metal turning handle. It has a detachable wooden lid.Front - E. Cherry - improve maker patent, Gisborne stencilled 0 Bottom - stencilled 0 On top of lid handle - 49260butter-churn domestic-items food-preparation wehner-hermann

Black powder splitting guns were commonly used to split large logs into more manageable pieces before the advent of excavators and front-end loaders in bush logging operations. A typical splitting gun used in Victorian forests was a piece of high-grade steel about 1-1/2 to 2 inches in diameter and about 16 inches long, and slightly tapered at one end. They had a ¾ inch hole drilled about 9 inches deep into the centre of the shaft with a small pilot hole drilled from the outside to load the fuse. The tube was carefully loaded with an amount of black gunpowder using a funnel and spoon. Experience being the guide on how much powder to use, which depended on log size, species and difficulty of splitting the wood. The hole was stopped with a piece of wadded paper and the gun positioned at the end of a length of the log to be split. The splitting gun was then belted into the log with a large wooden maul or even the back of an axe to a depth of about 3 to 4 inches. There were often markings as a guide. This also had the effect of tamping the black powder inside the gun. Preferably the gun was backed up by another large log to absorb the recoil shock and avoid it flying off in the bush somewhere. I have seen guns where a length of string and coloured flag could be attached to help find them. A length of fuse was then inserted in the small hole and lit. Kaboom !!!! Needless to say, the splitting gun was a dangerous implement.Log Splitting gun (large 50cm)forests commission victoria (fcv), hand tools

Black powder splitting guns were commonly used to split large logs into more manageable pieces before the advent of excavators and front-end loaders in bush logging operations. A typical splitting gun used in Victorian forests was a piece of high-grade steel about 1-1/2 to 2 inches in diameter and about 16 inches long, and slightly tapered at one end. They had a ¾ inch hole drilled about 9 inches deep into the centre of the shaft with a small pilot hole drilled from the outside to load the fuse. The tube was carefully loaded with an amount of black gunpowder using a funnel and spoon. Experience being the guide on how much powder to use, which depended on log size, species and difficulty of splitting the wood. The hole was stopped with a piece of wadded paper and the gun positioned at the end of a length of the log to be split. The splitting gun was then belted into the log with a large wooden maul or even the back of an axe to a depth of about 3 to 4 inches. There were often markings as a guide. This also had the effect of tamping the black powder inside the gun. Preferably the gun was backed up by another large log to absorb the recoil shock and avoid it flying off in the bush somewhere. I have seen guns where a length of string and coloured flag could be attached to help find them. A length of fuse was then inserted in the small hole and lit. Kaboom !!!! Needless to say, the splitting gun was a dangerous implement.Log Splitting gun (large 45cm)forests commission victoria (fcv), hand tools

Early electric spray gunConical shaped aluminium cover over spray nozzle. Electric power lead. Power plug made by J J Hoelle & Co. Australia. Three pins, 240 V, Total loading 10 ampsPlate warning of materials not to be used with this "gun'. Egaspray No 1525spray gun, ega developments

Butter pats used by aunt Loris Peggie- Nancy Jane (peggie) Cooke B1914-1987 Lived 27 Wolsley Cres, BlackburnButter pats used to make butterA pair of wooden butter pats rectangle in shape with handlesdomestic items, food preparation, food technology, dairying

Rev. William Butters (1810-1887) commenced his ministry as a chaplain to the convicts in Van Diemen’s Land in 1833.Print of an engraving by J. Cochran of Rev. William Butters in frame.butters, w, methodist

Butter ramekin belonging to a set produced for use at the Moorabbin Arts Centre (now Kingston Arts).White ceramic butter ramekin and Moorabbin Arts Centre logo on front.Marked on base: Royal Porcelain / Kingdom of Thailand / Oven to Table / Dishwasher - safe / Microwave - safeephemera, crockery, tableware, moorabbin arts centre

A series of newspaper articles titled "The Rest is History" were published in The Ballarat Courier every Saturday edition. The authors were Peter Butters, Dorothy Wickham and Anne Beggs Sunter.Newspaper clippingTHE REST IS HISTORY By Peter Butters, Ballarat historianthe rest is history, ballarat courier, peter butters

These are photos of the second Orbost Butter Factory built in 1916 in Forest Road Orbost.These photos are pictorial records of the Orbsot Butter Factory.Two b/w postcards of the Orbost Butter Factory. Both are copies of the originals.2627.1 on back ; John Scouller and Jo Cross standing behind grave of Dan the Cookorbost-butter-factory

This was used by the The Orbost Butter and Produce Co. Ltd .The Orbost Butter and Produce Co. Ltd was registered on June 1st 1893 and was an important source of income to the Orbost district.A paper/cardboard time sheet book. Some sheets - pp 1-33 - have been torn out at the front. Only the back page has been filled in. On each page as header - Orbost Butter & Produce Co. Ltd. TIME SHEETorbost-butter-factory agriculture farming time-book

.1) Khaki canvas carrier for a Lewis 303 in. gun ammunition magazine, canvas belt & metal loops. .2) x 2 Khaki canvas straps with metal buckles.“Carriers magazine Lewis 303 in. gun 1918 Goordy”military history - ammunition carrier, military equipment, passchendaele barracks trust

Hypodermic syringe gun in box donated by Tom Crocker (former Operations Manager, National Wool Museum), used on father's property in Violet Town.Metal hypodermic syringe gun.The Repeater Hypodermic syringe Wilcox Mofflin Limitedsheep dipping, crocker, mr tom - national wool museum

The first prototype of the Owen Gun was first developed by Evelyn Owen in 1931 and finalised the design in 1938. The Owen was the only entirely Australian - designed and constructed service sub-machine gun of World War11 and was used by Australian Army from 1942 until 1971. It was manufactured at Lysaght's works who built 45,000 units. The cartridge was the 9x19 Parabellum - fired 700 rounds per minute and had an effective range of 125 yards.The Owen was of significant advantage to the Australian Army in the jungles of Vietnam.Owen Gun - sub-machine gun also known as the (Owen machine carbine). Steel body and timber grip and butt.WFM 0067 on top of barrel.

The Warrnambool Battery on Flagstaff Hill has embankments for 3 guns. Those on the left and right still have cannon in place but in the centre is an empty embankment, apart from this concrete ring with metal threaded studs. In 1898 a 5 inch breech loading gun (BL) was installed here. The gun had a hydro-pneumatic disappearing carriage (hence the sign on the concrete wall "5" BL HP").. This type of gun was faster to load and fire that the 80 pound RML’s installed on either side of it. Its arrival spelt the end of the 80 pound RML guns’ useful life, although they continued to be used for practice sessions. The 5 inch BL was the main defensive weapon of the Warrnambool Battery until the Battery was downgraded in importance. It was removed in 1904 and recalled to Melbourne in 1910. The gun emplacement ring is all that remains of the mounting for a 5 inch Armstrong rifled breech loading gun. HISTOR of the WARRNAMBOOL GUNS & CANNON In the years following the Crimean War (1854-1857J) there was a great concern in the Colony that Imperial Russia would attempt an invasion. Coastal defences in the colony of Victoria were greatly strengthened by the Government as a result. Warrnambool was originally protected by cannons at Cannon Hill, approximately 1 kilometer west of the Flagstaff Hill Fortifications. The cannons included two 1866 guns, both 80 Pound Rifled Muzzle Loaders (RML) purchased by Victoria’s Colonial Government. They were part of a shipment of 26 such guns sent from England in December 1866. They are registered as No. 23 (80cwt-2qr-0lbs) - Gun 1, and No.13 (81cwt-1qr-12lbs) - Gun 2. They were cast at the Royal Gun Factory, Woolwich Arsenal, in 1866 and have a 6.3 inch bore. Both barrels carry the Royal Cypher of Queen Victoria, Insignia of the Royal Engineers, within the Garter and Motto surmounted by the Crown, with the Royal Cypher of Queen Victoria within the Garter (letters in centre “VR”, motto “HONI SOIT QUI MAL Y PENSE”, "Shame be to him who thinks evil of it."). The guns were originally supplied with wooden carriages. (The Royal Arsenal at Woolwich, England, was established eleven years after the Restoration of King Charles II. It was the principal supplier of armaments to the British and Empire Governments. At the height of its operations during World War One the factory covered 1300 acres and employed very nearly 80,000 workers. Woolwich was the Headquarters of the Royal Artillery since the raising of that Regiment in 1716. The Arsenal was closed in the late 1960’s.) These two 80pdr cannons were transferred to the Warrnambool Garrison Artillery Battery Fortifications erected at Flagstaff Hill in 1887 as part of Victoria’s Coastal Defences. The original wooden carriages were subsequently replaced with the present iron garrison carriages in 1888. They are a “C” pivot. The ‘racers’ or curved track set into the floor of the gun emplacement (which enabled the guns to be traversed more quickly) are as specified for guns up to 10 inch, being of wrought iron 2.78 inches wide. A temporary third gun, now no longer on Flagstaff Hill’s site, was the 5 inch Rifled Breech Loading (BL) Armstrong gun mounted on an Elswick hydro pneumatic disappearing carriage and installed in this very concrete base or pad. The State of Victoria took over the ownership of the guns at the time of Australian Federation in 1901. In about 1901/1902 the Garrison Battery was converted to the Warrnambool Battery of the Australian Field Artillery (No 4 Field Battery). It was equipped with 4.7 inch naval guns mounted on field carriages. They were now a mobile unit but continued to use the Warrnambool Garrison area at Flagstaff Hill for practice. When the Fortifications were declared obsolete the two 80 Pounder RML were relocated to Cannon Hill in 1910. On the outbreak of World War One the 4.7 inch guns were recalled to Melbourne, and the Battery was disbanded. Most of the personnel probably re-enlisted in the local 4th Australian Light Horse Regiment. The two 80 Pounder RML were moved back to the Fortifications in 1973. They were both fully restored by Army First Year Apprentices at the Ordinance Factory in Bendigo in time for the centenary year of the fortifications in 1987. The guns are capable of firing 80 pound (32.3kg) armour piercing exploding shells 3.65kms out to sea. They were originally manned by volunteers before a paid Garrison was established. Now the Guns are again fired by volunteers on Special Event days. Since restoration the Gun Number 1 had been fired on a regular basis but Gun Number 2 hadn’t been fired since the mid 1990’s. In April 2015 Gun Number 2 was serviced in preparation for the firing of both cannons on the ANZAC Centenary commemorations on April 25th 2015. Other guns from the original Cannon Hill location were obsolete by the time the 1887 Warrnambool Garrison Artillery Battery was built. These guns are (1) a 32 Pounder Muzzle Loading Smooth Bore (SB) cast in 1813 at the famous Carron Foundry, number 80837 and now located in the Warrnambool Botanic Gardens. It is now mounted on a replica carriage due to the original carriage being in a fragile condition (the original carriage stored under cover at Flagstaff Hill). (2) a 68 Pounder Muzzle Loading Smooth Bore cast in 1861 at the equally august Low Moor Foundry, number 10310 and now located on the lawn area at the entrance to Flagstaff Hill Maritime Village. It is still mounted on its original wooden garrison carriage. Its wooden slide compressor mechanism is fragile and now kept in Flagstaff Hill’s storage. There are only seven 32 Pounder SB made by Carron and fifteen 68 Pounder SB made at Low Moor known to exist in the State of Victoria [references; Flagstaff Hill Maritime Village interpretation boards, information sheets and other documents; South Western Victoria Guns and Cannon report, May 2008, ref W/F/08] The Gun embankment is contained within the heritage listed Lady Bay Lighthouse Comples, on the Victorian Heritage Register VHR H1520. The gun emplacement base is evidence of the last defences installed on this stretch of coastline. The Warrnambool Garrison has been added to the Victorian Heritage Register H1250 “for its intact battery and guns, a strong reminder of Victoria’s wealth and determination to protect itself from the perceived threat of invasion in the 1880’s.” The City of Warrnambool is one of several custodians of a collection of artillery pieces of heritage significance at a state, national and international level. These pieces are directly related to the defence of south-west Victoria in the 19th century. The care and preservation come under the Heritage Act 1995. Gun emplacement; the remains of the mounting platform of a temporary third gun installed in 1898 in the centre of the battery. This consists of a circular concrete well or sump surrounded by two rings of mounting bolts, the inner of 10 and the outer of 20. The base once held a 5 inch Armstrong rifled breech loading gun with hydro-pneumatic disappearing. In the centre of the ring on the ground is a keyhole shaped space. The gun was removed in 1904. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, colonial defences, victoria’s coastal defences, warrnambool fortification, warrnambool garrison battery, warrnambool volunteer corps, ordinance, armaments, cannon hill fortifications, flagstaff hill fortifications, 4th australian light horse regiment, garrison gun, 5 inch breech loading gun, emplacement for hydro-pneumatic disappearing carriage, gun emplacement

Plastic fawn coloured wood grain framed colour photo of six soldiers relaxing on ammo boxes and sand bags in gun pitA Field Battery FSB Ziggie May 1971 "Charles Gun and Visitors"a field battery, fsb ziggie, sgt al green, gnr george mulder, gnr david gibson, gnr neil smith, gnr gordon bright, gnr bruce ping kee

The Sunbury Gun was placed in this airconditioned room in the Village Green after it was restored. A coloured photograph of the Sunbury Gun in the Village Green precinct.gun, sunbury, village green, starkie fountain, fountains, clarke, william (sir), russell, janet (lady), starkie, joseph, war memorials, monuments and statues, church of england, churches, george evans collection

THIS COPY OF PHOTOGRAPH WAS TAKEN FROM COLLAGE OF CLUNES GUN CLUB. JANUARY 1903. REG. NO. OF COLLAGE 1001.1.2.3COPY OF PHOTOGRAPH OF MR. A.J. STEVENS. MEMBER OF CLUNES GUN CLUB COPY IS TAKEN FROM A COLLAGE OF CLUNES GUN CLUB JAN 1903local history, photography, photographs, gun club

Used domestically, though any extra butter could have been sold to neighbours. Many families kept a cow or two for milk etc. Cream needed to be at least 2 days old - the thicker the better. The handle was turned until the cream turned to butter,the whey was poured off and the butter washed in cold water until the water ran clear. Generally salt and bicarbonate of soda were added. Two pats were used to form butter into 1lb lots. This butter was most typically meant for consumption by the family, but in some instances it may be taken away for consignment by commercial receivers of dairy produce. This item is typical of the period when food processing was done at home. It would have been before the time of mass food processing factories.A metal butter churn with cast iron hand crank on side. The bowl container has a steel lid. It sits on a tripod stand.dairy butter-churn farming

Supplier identification gate sign used to identify a farm for milk collection by factory milk tankers. The sign showed the factory supplier's name and farm number. EJ (Ted) Delaney farmed at Nirranda South and was a company director for several years.Beige steel supplier identification gate sign with green lettering and Warrnambool Cheese and Butter Factory Co Ltd logo printed on top left hand corner.WCBF E.J.DELANEY 211/ Warrnambool Cheese and Butter Factory Co Ltd. Established 1888rural industry, agriculture, allansford, delaney ej (ted), warrnambool cheese and butter factory co ltd, milk suppliers, dairying, signs

The history of the Thunderchild gun is not known. It was presumably manufactured in Torquay in the second half of the 19th century. Such guns were often attached to a ship’s rail through the holes in the swivel base, as in the base of this gun. The guns fired grapeshot and were originally used on ships to repel boarders. They were also used to launch whaling harpoons and were sometimes employed for signalling. The relatively late date makes the latter application most likely. This Thunderchild gun is complete with ramrod and wad remover. It is in good working order and easily assembled. It is used locally for special ceremonies and for Whaleboat Races as a starting gun. (Guns and Cannon, South Wester Victoria, May 2008, ref W/F/03) The small bore cannon is part of a collection of nineteenth century Flagstaff Hill Guns and Cannon, which is classified as being a high level of significance, on State, National and World The nineteenth century artillery pieces are a very rare and representative collection of artillery of this era. The artillery pieces, individually and as a collection, are highly significant for historical, scientific and aesthetic reasons at the state, national and world levels. The artillery pieces are excellent examples of nineteenth century artillery designed for the shore defence of western Victoria in the mid to late 1800s. The collection demonstrates the system of nineteenth century Imperial Defence implemented by Britain and of the recycling of obsolete technology to the colonies by Britain. The collection represents the methods of artillery technology, its advancement and its modifications in order to remain active. It also illustrates the transference of defence technology from Britain to Australia and demonstrates the level of reliance Australia had on British defence equipment. The artillery pieces form prominent elements in their landscapes and, together with the batteries and sites in which they are located, create a strong visual link to the region’s defence history. Importantly the artillery pieces, individually and as a collection, represent a very rare and intact group of nineteenth century artillery. Very few examples of nineteenth century artillery have survived worldwide, the largest collections being sited in Canada. The collection is a rare collection of artillery which demonstrates the advancements made in artillery technology during the nineteenth century, and is one of the largest collections of nineteenth century artillery in Australia. Further, the collection is extremely intact, with most pieces retaining original carriages and many located within their original emplacement. This collection of artillery, with their carriages and in their locations, are of exceptional national significance as they represent the largest intact collection of artillery within a single defensive network, outside of major colonial ports. The collection of nineteenth century carriages and slides are in themselves an extremely rare and important collection, however their significance is enhanced by their placements within batteries and with guns. (Conservation Management Plan for Victorian Guns and Cannon, South Western Victoria, May 2008) Cannon; small 1pdr cast iron, smooth bore muzzle loading swivel gun, painted glass black. 19th century cannon has polished wood handle, two detachable metal stirrups and metal swivel base with cuff, attached to block of wood by four bolts. Accessories are a wood tamper and wood ramrod. Name on gun is Thunder-Child, Torquay, Vic. There are Maker’s Marks on the gun and base, and a number on the cannon.. Marks; Barrel "Thunder/ Child". Base cuff " THUNDER / -CHILD / TORQUAY / VIC ", Trunnion "2825/H"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, cannon, torquay, thunder child cannon, thunderchild cannon, signal cannon, muzzle loading cannon, ordinance, munitions