Showing 8865 items
matching handling
-
Geoffrey Kaye Museum of Anaesthetic History
Mask, Yankauer, c. 1904
Sidney Yankauer, M.D. (1872-1932), an ear, nose and throat specialist and pioneer in bronchoscopy, practiced at the Mount Sinai Hospital in New York. Dr. Yankauer, a prolific inventor of medical equipment, might best be known for the tube he designed for suctioning the mouth and throat. Yankauer introduced the wire-mesh anaesthesia mask around 1904. The drop method involved placing the mask over the patient’s nose and mouth, and then placing gauze over the mesh of the mask. Next, liquid anaesthetic, such as ether or chloroform, was applied in drops or lightly poured onto the gauze so that the patient breathed in evaporated anesthetic as well as air. The gutter around the base of the mask was designed to catch any residue of the harmful anaesthetic. (The Wood Library Museum, 2016; Museum of Healthcare Kingston, 2016)A metal tear-shaped mask with gauze wire dome, gutter around the base and detachable spring piece with open circular handle to secure cloth over gauze. Found inside medical carry box #899Stamped underneath neck of circular handle: HATRICKdr [e.s.] holloway, hatrick, yankauer, drop method, mask, gauze -
Mont De Lancey
Domestic object - Mincer, Universal, Unknown
A meat grinder or mincer was used for mincing or fine chopping of raw or cooked meat, fish, vegetables or similar food. It replaced tools like a mincing knife.A cast iron mincer with a wooden handle attached to the long cast iron handle. It can be screwed to a table or bench, secured tightly by a two pronged claws. It has a funnel at the top for the meat to be pushed into the mechanism which when the handle is turned operates the inner mechanism which forces the minced meat out through a side opening. The cast iron handle is curved. There are three mincing attachments tied with string.'UNIVERSAL' is stamped on the top of the mincer. Stamped on the front side of the handle - ' L.P. F&C. NEW BRITAIN. CONN.U.S.A.' On the inside of the cast iron handle is stamped - 'PATENT 10.2.1897. PATENT.MAY 15.1900. 4.18. 1890...... and several other numbers which are difficult to decipher.domestic objects, kitchen equipment, cooking equipment, meat grinders, meat mincers -
Orbost & District Historical Society
adze, late 19th century
Adzes are used for smoothing or carving wood in hand woodworking. It is similar to an axe but with the cutting edge perpendicular to the handle. It is used chiefly for shaping wood.A square ended adze that has a thin arched blade set at right angles to the wooden handle. The handle is not original.wood-working-tool adze carpentry -
Orbost & District Historical Society
bread knife, 1950's 1970's
This knife would have had an original bone handle which may have been damaged beyond repair. It has been replaced by a sturdy metal one so as to retain the quality blade. This item shows the self-reliance of families in preserving valued domestic possessions.A bread knife. The original handle has been replaced by a metal handle welded on.Bread Knife Leppington (Cutlers) Firth Brearley Sheffield Eng. Stainlessknife cutlery leppington firth-brearley -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Tools, Coping saw, c1900
A coping saw is a type of hand saw used to cut intricate external shapes and interior cutouts in woodworking or carpentry. It is widely used to cut mouldings to create coped rather than miter joints. It is occasionally used to create fretwork though it is not able to match a fretsaw in intricacy of cut, particularly in thin materials. Coping saw blades are always thicker and much coarser cutting than typical fretsaw blades. A coping saw consists of a thin, hardened steel blade, stretched between the ends of a square, c-shaped, springy-iron frame to which a handle is attached. The blade is easily removed from the frame so that the blade can be passed through a drilled hole in the middle of a piece of wood. The frame is then re-attached to the blade and the cut starts from the middle of the piece. Long cuts perpendicular to the edge of the material are possible but the shallow depth of the frame rather limits how far from the edge one may cut. The much deeper frame of the fretsaw is more useful for cutting well away from the edge but conversely cannot manage the thicker materials commonly cut by the coping saws. The coping saw blade is installed with the teeth pointing towards the handle. Unlike a hacksaw, which has the teeth pointed away from the handle, the coping saw cuts on the pull stroke. The coping saw blade is removable by partially unscrewing the handle. The blade is prevented from rotating by means of the short, steady bar provided where the blade is attached. Loosening the handle also allows the blade to be rotated relative to the frame as desired. Carefully aligning the finger steady bars at the top and bottom of the blade ensures that the thin blade is straight and not twisted along its length. Re-tightening the handle tensions the blade and locks it at the desired angle relative to the frame. The short steady bar nearest the handle is held securely between finger and thumb while the handle is tightened to ensure the blade remains at the desired angle. Unlike the fretsaw the coping saw blade has holding pins which lock securely into the angled slots of the rotatable blade holders. Gentle curves are achieved by slowly turning the whole frame by means of the handle while continuing to cut steadily. A coping saw with wooden handle but no bladetools, saws, steel , clamps, metalwork, woodwork, carpentry, early settlers, pioneers, market gardeners, moorabbin, bentleigh, cheltenham, fretsaw, coping saw, bowsaw, blacksmiths, -
Port Fairy Historical Society Museum and Archives
Memorabilia - Spoon
Found in Lifeline Shop. research is continuing to find the winner A Synett and whether they lived in the area.Sterling silver spoon trophy with handle depicting 2 golf clubs and golf ball. The bowl depicts a golfer swinging a club.Back of spoon - "A SYNOTT 1937" Back of Handle - "STERLING SILVER APEX"trophy, award, golf, a.synett, port fairy -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Tools, wooden hammer with steel head, c1900
A hammer is a tool with a heavy head and a handle, often made of shock-absorbent wood or fiberglass that is used to strike an object. The most common uses for hammers are to drive nails, fit parts, forge metal, and break apart objects. Hammers vary in shape, size, and structure, depending on their uses. Hammers are basic tools in many trades. A hammer is composed of a head most often made of steel and a handle also called a helve or haft. Most hammers are hand tools. A traditional hand-held hammer consists of a separate head and a handle, fastened together by means of a special wedge made for the purpose, or by glue, or both. This two-piece design is often used, to combine a dense metallic striking head with a non-metallic mechanical-shock-absorbing handle -to reduce user fatigue from repeated strikes. If wood is used for the handle, it is often hickory or ash, which are tough and long-lasting materials that can dissipate shock waves from the hammer head. A well used hammer with wooden handle and steel headpioneers, early settlers, market gardeners, moorabbin, brighton, cheltenham, tools, craftsman, carpenters, blacksmiths, builders, woodwork, -
National Wool Museum
Screwdriver
A small screwdriver with a wooden handle, associated with the "Beehive Sock Knitter"A small screwdriver with a wooden handle, associated with the "Beehive Sock Knitter".knitting textile machinery machine knitting, hosiery, knitting, textile machinery, machine knitting -
Victoria Police Museum
Revolver
Weapon believed to have been owned by Edward Kelly as evidenced by letters 'EK' scratched into the bottom of the handle. Colt Model 1849 Percussion Revolver, Serial Number 53939. Five round chamber and a plain timber handle with the letters 'E.K.' scratched into the handle.edward kelly, ned kelly, kelly gang, weapon -
Flagstaff Hill Maritime Museum and Village
Foghorn
Portable foghorn with workings in wooden box. Foghorn sound is made by turning the handle on the outside of the box. The rotational movement pumps bellows inside the box, forcing air across a fine reed, similar to a clarinet reed, which makes the sound. The sound is amplified by the round horn inserted into one end of the box. Different warning signals are made by turning the handle at different speeds and by stopping and starting the handle.Foghorn, portable, in rectangular wood box with handle on side with horn inside. There is a leather strap attached to the top of the box as a carrying handle. This type of foghorn is sometimes referred to a s a Rotary Type foghorn (Norwegian Pattern) flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, foghorn, portable foghorn, ship's signal, rotary foghorn -
Clunes Museum
Award - Umbrella, c 1935
Presented to Richard Lean, Mayor 1934-35Black umbrella with bamboo handle. Metal plate on handle inscribed "Presented to Councillor R.Lean by the Clunes Councillors on the 25th Anniversary as a Councillor 7.3.1935".Metal plate on handle inscribed "Presented to Councillor R.Lean by the Clunes Councillors on the 25th Anniversary as a Councillor 7.3.1935". British Make on spoke.clunes councillor, richard lean, mayor 1934-35 -
Orbost & District Historical Society
billiard table iron
This item was used at The Men's Club Orbost in Livingstone Street, Orbost.This item is representative of the leisure activities of people during the nineteenth century and early 20th century. The Orbost Men's Club no longer exists. It is also significant as being associated with the history of Australia's leading manufacturer of billiard tables, Alcock of Melbourne who were established in 1854 and are still in business today.Billiard table iron; a heavy iron of cast metal. This has a large, rectangular face with attached, cast metal handle. This was used for pressing the cloth of a billiards table. Engraved/embossed on handle is ALCOCK THOMSON & TAYLOR PTY LTDrecreation billiards billiards-table-iron men's-club-orbost -
Orbost & District Historical Society
cream separator, 1920s - 1950s
This item would have been very common on farms throughout the Orbost area. Prior to bulk milk, cream was the major commodity which was sold to the butter factory. This is a small separator, typical of home use. This domestic kitchen appliance is typical of the period when food processing was done at home. It would have been before the time of mass food processing factoriesHand operated rusted metal cream separator with metal and wood handle.Front - A.O Handle-75.T.PR.MIN Back- (RHS) A.O. (LHS) Co-op in outline of Australia.cream-separator domestic-food-preparation dairy-farming -
Mont De Lancey
Domestic object - Mincer, Universal, Unknown
A meat grinder or mincer was used for mincing or fine chopping of raw or cooked meat, fish, vegetables or similar food. It replaced tools like a mincing knife.A vintage cast iron mincer with a wooden handle attached to the long cast iron handle. It can be screwed to a table or bench, secured tightly by a two pronged claws. It has a funnel at the top for the meat to be pushed into the mechanism which when the handle is turned operates the inner mechanism which forces the minced meat out through a side opening. The cast iron handle is curved.'2 UNIVERSAL' is stamped on the front of the mincer. Stamped on the front side of the handle - ' L. F&C. NEW BRITAIN. CONN.U.S.A.' On the inside of the cast iron handle is stamped - 'PATENT 12 1897. PAT.MAY 15.1909. 4.18. 1899. D.R.ENG 10'...... and several other numbers which are hard to decipher.domestic objects, kitchen equipment, cooking equipment, meat grinders, meat mincers -
The Beechworth Burke Museum
Functional object - Lorgnette, no
A lorgnette, in essence, consists of a handle-mounted pair of spectacles. Lorgnettes, which preceded modern opera binoculars, were frequently seen at both theaters and operas during the 19th century. The term "lorgnette" is derived from the French word "lorgner," which means to discreetly observe or gaze. Prior to the 17th century, optical devices were mainly associated with men, however the creation of the lorgnette marked a significant shift as women started to play a more prominent role in the realm of eyewear. The lorgnette piqued women's curiosity and led to the development of various new designs, such as the "jealousy lorgnette." Furthermore, the lorgnette evolved beyond its initial function as a theater or opera accessory and transformed into a practical daily accessory. Initial versions of the lorgnette featured a handle without any joints. Subsequent iterations introduced a hinged handle, and by the 19th century, a spring mechanism was incorporated which enabled the lenses to fold neatly inside the handle, which also doubled as a protective case.The Burke Museum's collection of historical artifacts illuminates Beechworth's past by showcasing the town's social, cultural, and economic dimensions, contributing to a richer understanding of its social history.A pair of spectacles with a decorative handle attached.burke museum, social history, glasses, opera -
National Wool Museum
Seal press
Black iron seal press with hinged handle. It has been glued into a wooden lidded box at its base.Black iron seal press with hinged handle. -
Ringwood RSL Sub-Branch
Weapon - Edged weapon, Sword, Circa WW2
Japanese sword with aluminimum handle and steel scabbard. Scabbard has been painted black still with traces of the khaki paint.Sword is numbered 18634 (on the blade). Japanese hieroglyphics on the handle. Missing tsuba/handguard. -
Trafalgar Holden Museum
Leisure object - Polo Mallet
Cane handled timber polo mallet used for sport and recreationImported and sold by Holden and FrostCane handled polo mallet with wooden head and rubber hand gripC151Cpolo, mallet -
Greensborough Historical Society
Domestic object - Teapot, Swan [brand] teapot, 1950s
Commonly used 4 cup aluminium teapot with lid, Bakelite handle and knob.Four cup tea pot with lid; bakelite handle and knob."Swan Brand Made in England 4 cups" engraved on baseteapots -
Greensborough Historical Society
Teapot, Swan [brand] teapot, 1960s
Commonly used 2 cup aluminium teapot with lid, Bakelite handle and knob.Two cup tea pot with lid; bakelite handle and knob"Swan Brand Made in England The Carlton 2 cups" engraved on baseteapots -
Greensborough Historical Society
Domestic object - Teapot, 1960s
Commonly used 2 cup aluminium teapot with lid, Bakelite handle and knob.Two cup tea pot with lid; bakelite handle and knobteapots -
Kew Historical Society Inc
Functional object - Brown Gouge clothes brush, 1960s
Produced as a promotional item by Brown Gouge, a dry-cleaning company with agencies across Victoria - including one at Kew - hence the "X3101" labelling (being Kew's postcode, as introduced in 1967).Locally significant. A locally targeted promotional item, albeit a useful and functional item. Most similar items would have had a limited life and thus they are now likely to be uncommon.Clothes brush, with a brown stained / lacquered wooden handle and a single-row of black, stiff brush hairs. Inscribed on one side of the wooden handle: Gouge - The Successful DRY CLEANERS AND DRYERS - X3101clothes brushes, brown gouge -
Wodonga & District Historical Society Inc
Functional object - Balloon Flashlight Magnifying Glass
The Balloon flashlight magnifying glass was donated by a resident of Wodonga and is an unusual example of glass magnifiers with an inbuilt light made by the Balloon company.The flashlight magnifying glass has local significance due to its donation by a resident of Wodonga. It also has historical significance as an example of a relatively rare type of vintage Balloon magnifying glass with an inbuilt light.Metal and plastic flashlight magnifying glass, with a light attached to the interior end of the handle, to illuminate the magnified area."TRADE MARK / BALLOON / MADE IN HONG KONG" on the dark brown plastic end of the handle.magnifying glass, flashlight magnifying glass, balloon magnifying glass, balloon hong kong -
Friends of Westgarthtown
Barrel
Large wooden barrel used for bread storage. Three iron bands evenly spaced down side of barrel, one missing 3/4 way down. Wooden lid with stiffeners/handles. Barrel constructed of bowed pieces of oak (?) joined lengthways.s' and 'c' stamped into long handle on lid.domestic items, food storage and preservation, barrel, oak, bread, container, pantry -
Whitehorse Historical Society Inc.
Domestic object - Pressure Cooker, c1950
Used by donor's family in the 1950s,60s,70, & 80s. They were originally made at the Commonwealth Aircraft Factory after the war to use the facilities available.Namco Pressure Cooker - a large heavy aluminium saucepan with a close fitting lid which seals on a rubber ring (missing). The lid is locked in place by wide interlocking lugs on the saucepan and the lid. It has a gauge to indicate pressure and a lever and seal system on the lid which locks into safety lock. The safety lock includes a stem release hole in which a small round plug is inserted. The pressure can be adjusted. Also included is a lead safety plug to release the steam if it overheats. Two bakelite covered steel handles aids its use.526Y on both handlesdomestic items, cooking -
Parks Victoria - Days Mill and Farm
Container - Tin, bucket
Has been adapted with the use of a wire handle to form a small bucket. AXLE GREASE TIN - round tin with handle, blue with yellow writing"Baltic" Axle Grease" - on one side of can. On the other, "AGENTS/ BALTIC & PAASCH DAIRY / 539 FLINDERS ST MELBOURNE / P. SHEAHAN & CO / 453 - 5 FLINDERS LANE MELBOURNE"container, transport -
Montmorency/Eltham RSL Sub Branch
Equipment - Mess Tin, 1939
The Mess Box ( 0089.1 ) is one of two with the partnering box referenced at 0089.1Aluminium Mess Tin with metal movable steel handle attached to one end.Inscribed on aluminium plate affixing handle to box “ C & B. Ltd. 1939. “ with arrow pointing upwards. -
Churchill Island Heritage Farm
Tool - Scythe
A scythe is an agricultural hand tool that cuts grass and is used by making large sweeping motions through the crop. Eventually replaced by horse-drawn or motorised machinery, they are occasionally still used as they are inexpensive and efficient. There are different types of scythes with larger or smaller blades. This particular scythe has a bored hole in the handle, probably for affixing a long wooden handle. Made by Trojans and Sons, a Melbourne based company that made a wide range of gardening and agricultural tools, this scythe formed an integral part of farming on Churchill Island. scythe with surface rust, no handle, good steel, rough welds on socket, hole for mounting handle (e.g. with screw)TROJAN/264scythe, hand tools, agriculture, churchill island heritage farm -
Mont De Lancey
Burnishers
Implements with a hard smooth roundedend or surface used for smoothing and polishing.Set of four burnishing tools used to polish leather. 3 - Metal with wooden handles. 1 - All metal with patterned ends,L. Richter Northampton on wooden handle, double ended tool with round middle.burnishers, polishers, surface finishing tools -
Flagstaff Hill Maritime Museum and Village
Domestic object - Butter Churn, Malleys Ltd, 1930-1950
This is a steel, bench-mounted, hand-operated (60 rpm) butter churn for making small amounts of butter from cream in the home. It was made by the Sydney firm of Malleys Ltd from the 1930s until the 1950s and came in 3 and 5 quart sizes. Malleys Ltd was established in about 1890 by Francis Malley (1863-1932). This firm was located in the Sydney suburb of Alexandria, in McEvoy Street. They manufactured items for use in the dairy industry, as well as for hardware related to building and plumbing. Many of the Malley dairy products were sold under the "Sunrise" name. Malley retired in 1912. In 1931 there were branches at Parramatta, Hurstville & North Sydney. Butter churns were machines used to produce butter by the violent agitation of separated cream. Depending on the design of the churn, the agitation would be variously achieved by a repetitive thrashing, centrifugal motion or internal paddles. Churns were typically constructed from wood, glass and cast-iron; with tin or steel commonly used for some fixtures. The subject item gives an insight into domestic life where butter was made in the home.Heavy red cast iron base, with a long handle, wooden grip, connected to a shaft along the base, thence, to a cog wheel, and gear, to a second shaft and paddle in a metal basin. Basin has lid, and hole in base with a screw cap to allow the draining of the butter milk. Designed to be placed on a bench, with the handle over the edge. Malleys is written in raised letters on the base, and on the handle, '60 rev. pr. min.'warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, malleys, butter churn, domestic object, dairy machine